Items where Division is "University of Nottingham UK Campus > Faculty of Engineering" and Year is [pin missing: value2]
Number of items at this level: 367.
Hale, Jonathan (2017) Merleau-Ponty for architects. Thinkers for architects . Routledge, Abingdon. ISBN 9780415480710 (Submitted)
Schindler, Steffen and Hegemann, Felix and Koch, Christian and König, Markus and Mark, Peter (2016) Radar interferometry based settlement monitoring in tunnelling: visualisation and accuracy analyses. Visualization in Engineering, 4 . 7/1-7/16. ISSN 2213-7459
Chen, Sheng and Yang, Bo and Zheng, Chuguang (2016) A lattice Boltzmann model for heat transfer in heterogeneous media. International Journal of Heat and Mass Transfer, 102 . pp. 637-644. ISSN 0017-9310
Evans, A.D. and Qian, C.C. and Turner, T.A. and Harper, L.T. and Warrior, N.A. (2016) Flow characteristics of carbon fibre moulding compounds. Composites Part A: Applied Science and Manufacturing, 90 . pp. 1-12. ISSN 1359-835X
Jasim M, Ali and Marsh, Stuart and Smith, Martin J. (2016) Modelling the spatiotemporal change of canopy urban heat islands. Building and Environment, 107 . pp. 64-78. ISSN 1873-684X
Vaithilingam, Jayasheelan and Prina, Elisabetta and Goodridge, Ruth D. and Hague, Richard J.M. and Edmondson, Steve and Rose, Felicity R.A.J. and Christie, Steven D.R. (2016) Surface chemistry of Ti6Al4V components fabricated using selective laser melting for biomedical applications. Materials Science and Engineering: C, 67 . pp. 294-303. ISSN 0928-4931
Jin, X. and Sun, W. and Shipway, P.H. (2016) Derivation of a wear scar geometry-independent coefficient of friction from fretting loops exhibiting non-Coulomb frictional behaviour. Tribology International, 102 . pp. 561-568. ISSN 1879-2464
Jin, X. and Sun, W. and Shipway, P.H. (2016) The role of geometry changes and debris formation associated with wear on the temperature field in fretting contacts. Tribology International, 102 . pp. 392-406. ISSN 1879-2464
Kyaw, Si Thu and Rouse, James Paul and Lu, Jiawa and Sun, Wei (2016) Determination of material parameters for a unified viscoplasticity-damage model for a P91 power plant steel. International Journal of Mechanical Sciences, 115-116 . pp. 168-179. ISSN 0020-7403
Hermawati, Setia and Lawson, Glyn (2016) Establishing usability heuristics for heuristics evaluation in a specific domain: is there a consensus? Applied Ergonomics, 56 . pp. 34-51. ISSN 1872-9126
de Bono, John P. and McDowell, Glenn R. (2016) The fractal micro mechanics of normal compression. Computers and Geotechnics, 78 . pp. 11-24. ISSN 0266-352X
Aboulkhair, Nesma T. and Maskery, Ian and Tuck, Christopher and Ashcroft, Ian and Everitt, Nicola M. (2016) Improving the fatigue behaviour of a selectively laser melted aluminium alloy: influence of heat treatment and surface quality. Materials & Design, 104 . pp. 174-182. ISSN 0264-1275
Choong, Gabriel Y. H. and De Focatiis, Davide S.A. (2016) A method for the determination and correction of the effect of thermal degradation on the viscoelastic properties of degradable polymers. Polymer Degradation and Stability, 130 . pp. 182-188. ISSN 1873-2321
Polenta, Valerio and Garvey, Seamus D. and Chronopoulos, Dimitrios and Long, Andy C. and Morvan, Herve P. (2016) Novel stiffeners exploiting internal pressurisation to enhance buckling behaviour under bending loads. Thin-Walled Structures, 105 . pp. 81-89. ISSN 0263-8231
Kirkwood, Charlie and Cave, Mark and Beamish, David and Grebby, Stephen and Ferreira, Antonio (2016) A machine learning approach to geochemical mapping. Journal of Geochemical Exploration, 167 . pp. 49-61. ISSN 1879-1689
Sun, Shen and Hayes-Gill, Barrie R. and He, Diwei and Zhu, Yiqun and Huynh, Nam T. and Morgan, Stephen P. (2016) Comparison of laser Doppler and laser speckle contrast imaging using a concurrent processing system. Optics and Lasers in Engineering, 83 . pp. 1-9. ISSN 0143-8166
Lee, Chai Siah and Binner, Eleanor and Winkworth-Smith, Charles and John, Rebecca and Gomes, R.L. and Robinson, John (2016) Enhancing natural product extraction and mass transfer using selective microwave heating. Chemical Engineering Science, 149 . pp. 97-103. ISSN 0009-2509
Guan, Guangying and Hirsch, Matthias and Syam, Wahyudin P. and Leach, Richard K. and Huang, Zhihong and Clare, Adam T. (2016) Loose powder detection and surface characterization in selective laser sintering via optical coherence tomography. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 472 (2191). 20160201/1-20160201/14. ISSN 1471-2946
Doycheva, Kristina and Koch, Christian and König, Markus (2016) GPU-enabled pavement distress image classification in real time. Journal of Computing in Civil Engineering . ISSN 1943-5487 (In Press)
Maskery, Ian and Aboulkhair, N.T. and Aremu, A.O. and Tuck, C.J. and Ashcroft, I.A. and Wildman, R.D. and Hague, R.J.M. (2016) A mechanical property evaluation of graded density Al-Si10-Mg lattice structures manufactured by selective laser melting. Materials Science and Engineering: A, 670 . pp. 264-274. ISSN 0921-5093
Sójka, L. and Furniss, David and Tang, Zhuoqi and Sakr, H. and Barney, Emma R. and Benson, Trevor M. and Seddon, Angela B. and Sujecki, S. and Scholle, K. and Lamrini, S. and Fuhrberg, P. (2016) Numerical modeling of lathanide-ion doped fibre lasers operating within mid-infrared wavelength region. In: 18th International Conference on Transparent Optical Networks, 10-14 July 2016, Trento, Italy.
Seddon, Angela B. and Furniss, David and Tang, Z.Q. and Sójka, L. and Benson, Trevor M. and Caspary, R. and Sujecki, S. (2016) True mid-infrared Pr3+ absorption cross-section in a selenide-chalcogenide host-glass. In: 18th International Conference on Transparent Optical Networks, 10-14 July 2016, Trento, Italy. (In Press)
Ferrari-John, R.S. and Katrib, Juliano and Palade, Paula and Batchelor, A.R. and Dodds, Chris and Kingman, S.W. (2016) A tool for predicting heating uniformity in industrial radio frequency processing. Food and Bioprocess Technology . ISSN 1935-5130 (In Press)
Altomonte, Sergio and Saadouni, Sara and Schiavon, Stefano (2016) Occupant satisfaction in LEED and BREEAM-certified office buildings. In: 36th International Conference on Passive and Low Energy Architecture. Cities, Buildings, People: Towards Regenerative Environments (PLEA 2016), 11-13 July 2016, Los Angeles, USA.
Vi Le, Thi Ho and Gillott, Mark C. and Rodrigues, Lucélia Taranto (2016) The case for hybrid ventilated primary schools in Ho Chi Minh City in Vietnam. In: 36th International Conference on Passive and Low Energy Architecture. Cities, Buildings, People: Towards Regenerative Environments (PLEA 2016), 11-13 July 2016, Los Angeles, USA.
Moschetti, Giuseppe and Forbes, Alistair and Leach, Richard K. and Jiang, Xiang and O’Connor, Daniel (2016) Quadrature wavelength scanning interferometry. Applied Optics, 55 (20). pp. 5332-5340. ISSN 2155-3165
Lawson, Glyn and Brown, Michael and Coughlan, Tim and Floyde, Anne and Baurley, Sharon and Elliott, Meretta and Koppe, Therese and Tsai, Allen (2016) Enhancing the design process with drama-related methods. Design Journal, 19 (4). pp. 605-623. ISSN 1460-6925
Otaru, A.J. and Kennedy, Andrew R. (2016) The permeability of virtual macroporous structures generated by sphere packing models: comparison with analytical models. Scripta Materialia, 124 . pp. 30-33. ISSN 1359-6462
Graham, Shalini L. and Ogunfayo, Ibrahim and Hall, Matthew R. and Snape, Colin and Quick, Will and Weatherstone, Susan and Eastwick, Carol (2016) Changes in the mechanical properties of biomass wood pellets during artificial degradation in a laboratory environment. Fuel Processing Technology . ISSN 0378-3820
Neuhausen, Marcel and Koch, Christian and König, Markus (2016) Image-based window detection: an overview. In: 23rd International Workshop of the European Group for Intelligent Computing in Engineering, 29 June - 1st July 2016, Krakow, Poland.
Uguna, Clement N. and Carr, Andrew D. and Snape, Colin E. and Meredith, Will (2016) Retardation of oil cracking to gas and pressure induced combination reactions to account for viscous oil in deep petroleum basins: evidence from oil and n-hexadecane pyrolysis at water pressures up to 900bar. Organic Geochemistry, 97 . pp. 61-73. ISSN 0146-6380
Badiee, A. and Ashcroft, I.A. and Wildman, Ricky D. (2016) The thermo-mechanical degradation of ethylene vinyl acetate used as a solar panel adhesive and encapsulant. International Journal of Adhesion and Advesives, 68 . pp. 212-218. ISSN 0143-7496
Dadashi, Nastaran and Wilson, John R. and Golightly, David and Sharples, Sarah (2016) Alarm handling for health monitoring: operator strategies used in an electrical control room of a rail network. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 230 (5). pp. 1415-1428. ISSN 2041-3017
Silva, Ana and Gaspar, Pedro L. and de Brito, Jorge and Neves, Luís C. (2016) Probabilistic analysis of degradation of façade claddings using Markov chain models. Materials and Structures, 49 (7). pp. 2871-2892. ISSN 1359-5997
Neges, Matthias and Koch, Christian (2016) Augmented reality supported work instructions for onsite facility maintenance. In: 23rd International Workshop of the European Group for Intelligent Computing in Engineering, 29 June - July 1st 2016, Kraków, Poland.
de Bono, John P. and McDowell, Glenn R. (2016) Investigating the effects of particle shape on normal compression and overconsolidation using DEM. Granular Matter, 18 (3). ISSN 1434-7636
Gan, Guohui (2016) Dynamic thermal simulation of ground heat exchangers for renewable heating of buildings. In: International Symposium of Heat Transfer and Heat Powered Cycle 2016, 26-29 June 2016, Nottingham, UK.
Matveev, Mikhail Y. and Long, Andrew C. and Brown, Louise P. and Jones, I. Arthur (2016) Effects of layer shift and yarn path variability on mechanical properties of a twill weave composite. Journal of Composite Materials . ISSN 0021-9983
Magri, L. and See, Y.-C. and Tammisola, Outi and Ihme, M. and Juniper, M.P. (2016) Multiple-scale thermo-acoustic stability analysis of a coaxial jet combustor. Proceedings of the Combustion Institute . ISSN 1540-7489
Chandra, Budi and Simmons, Kathy (2016) Innovative shallow sump customizations for aero-engine bearing chambers. In: ASME 2016 Turbo Expo, 13-17 Jun 2016, Seoul, South Korea.
Ampatzidis, Theofanis and Chronopoulos, Dimitrios (2016) Acoustic transmission properties of pressurised and pre-stressed composite structures. Composite Structures . pp. 1-49. ISSN 1879-1085
Aboulkhair, Nesma T. and Maskery, Ian and Tuck, Christopher and Ashcroft, Ian and Everitt, Nicola M. (2016) The microstructure and mechanical properties of selectively laser melted AlSi10Mg: The effect of a conventional T6-like heat treatment. Materials Science and Engineering: A, 667 . pp. 139-146. ISSN 0921-5093
Vileiniskis, Marius and Remenyte-Prescott, Rasa and Rama, Dovile and Andrews, John D. (2016) Bayesian belief networks for fault detection and diagnostics of a three-phase separator. In: ESREL 2016, 25-29 Sept 2016, Glasgow, UK. (In Press)
Bristot, Andrea and Morvan, Herve P. and Simmons, Kathy (2016) Evaluation of a volume of fluid CFD methodology for the oil film thickness estimation in an aero-engine bearing chamber. In: ASME 2016 Turbo Expo, 13-17 Jun 2016, Seoul, South Korea.
Vileiniskis, Marius and Remenyte-Prescott, Rasa (2016) Extended Bow-Tie model for asset risk and reliability modelling. Application to a passenger lift. In: ESREL 2016, 25-29 Sept 2016, Glasgow, UK. (Submitted)
Rollinson, Andrew (2016) Gasification reactor engineering approach to understanding the formation of biochar properties. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences . ISSN 1471-2946 (In Press)
Li, Q. and Shayler, P.J. and McGhee, M. and La Rocca, A. (2016) The initiation and development of combustion under cold idling conditions using a glow plug in diesel engines. International Journal of Engine Research . pp. 1-16. ISSN 2041-3149
Yao, Yuan and Logan, Brian and Thangarajah, John (2016) Intention selection with deadlines. In: 22nd European Conference on Artificial Intelligence (ECAI 2016), 29 August - 2 September 2016, The Hague, Netherlands. (Submitted)
Thompson, Adam and Maskery, Ian and Leach, Richard K. (2016) X-ray computed tomography for additive manufacturing: a review. Measurement Science and Technology, 27 (7). 072001/1-072001/17. ISSN 1361-6501
Pérez López, Iker and Pinchin, James and Brown, Michael and Blum, Jesse and Sharples, Sarah (2016) Unsupervised labelling of sequential data for location identification in indoor environments. Expert Systems with Applications . ISSN 0957-4174
Mohammed, J. and Moore, Terry and Hill, Chris and Bingley, R.M. and Hansen, D.N. (2016) An assessment of static Precise Point Positioning using GPS only, GLONASS only, and GPS plus GLONASS. Measurement, 88 . pp. 121-130. ISSN 0263-2241
Barbosa, Andre R. and Ribeiro, Filipe L. A. and Neves, Luís A. C. (2016) Influence of earthquake ground-motion duration on damage estimation - application to steel moment resisting frames. Earthquake Engineering and Structural Dynamics . ISSN 1096-9845
Grejner-Brzezinska, Dorota A. and Toth, Charles K. and Moore, Terry and Raquet, John F. and Miller, Mikel M. and Kealy, Allison (2016) Multisensor navigation systems: a remedy for GNSS vulnerabilities? Proceedings of the IEEE, 104 (6). pp. 1339-1353. ISSN 0018-9219
Bandele, Oluwatosin Jeremiah and Desai, Priyanka and Woolfson, Malcolm S. and Phillips, Andrew Julian (2016) Saturation in cascaded optical amplifier free-space optical communication systems. IET Optoelectronics, 10 (3). pp. 71-79. ISSN 1751-8776
Rodrigues, Lucélia Taranto and Marsh, Julian and Kiamba, Lorna and Gillott, Mark C. and O'Doherty, Travis (2016) The case for localised energy management to support resilient cities. In: PLEA 2016, 11-13 July 2016, Los Angeles, USA.
Egger, Adrian W. and Triantafyllou, Savvas P. and Chatzi, Eleni N. (2016) The scaled boundary finite element method for the efficient modeling of linear elastic fracture. In: 9th International Conference on Fracture Mechanics of Concrete and Concrete Structures (FraMCoS-9), 28 May - 1 June 2016, Berkely, California, USA.
Golightly, David and Sharples, Sarah and Patel, Harshada and Ratchev, Svetan (2016) Manufacturing in the cloud: a human factors perspective. International Journal of Industrial Ergonomics . ISSN 0169-8141 (In Press)
Abayzeed, Sidahmed A. and Smith, Richard J. and Webb, Kevin F. and Somekh, Michael G. and See, Chung W. (2016) Responsivity of the differential-intensity surface plasmon resonance instrument. Sensors and Actuators B: Chemical . ISSN 1054-6693 (In Press)
Kakimpa, Bruce and Morvan, Herve and Hibberd, Stephen (2016) The depth-averaged numerical simulation of laminar thin-film flows with capillary waves. Journal of Engineering for Gas Turbines and Power, 138 (11). 112501/1-112501/10. ISSN 0742-4795
Lo Presti, Davide and Jiménez del Barco Carrión, Ana and Airey, Gordon and Hajj, Elie (2016) Towards 100 % recycling of reclaimed asphalt in road surface courses: binder design methodology and case studies. Journal of Cleaner Production . ISSN 1879-1786
Sójka, L. and Tang, Z. and Furniss, David and Sakr, H. and Bereś-Pawlik, E. and Seddon, Angela B. and Benson, Trevor M. and Sujecki, S. (2016) Numerical investigation of mid-infrared laser action in Pr3+ doped chalcogenide fibre laser. In: 24th International Workshop on Optical Wave & Waveguide Theory and Numerical Modelling (OWTNM 2016), 20-21 May 2016, Warsaw, Poland.
Martin, Benjamin A.J. and Masih, Dawa and Lau, Benson and Beccarelli, Paolo and Chilton, John (2016) An evaluation of thermal and lighting performance within an ETFE structure. In: Sustainable ecological engineering design. Springer, pp. 47-58. ISBN 9783319326450
Phang, Sendy and Vukovic, Ana and Creagh, Stephen and Gradoni, Gabriele and Sewell, Phillip and Benson, Trevor M. (2016) Time-modulated gain and loss parity-time symmetric resonators. In: 24th International Workshop on Optical Wave & Waveguide Theory and Numerical Modelling (OWTNM 2016), 20-21 May 2016, Warsaw, Poland. (Unpublished)
Delamere, Lise and Lumby, Andy and Treble, Peter and Golightly, David (2016) D-MOD Dynamic Modelling of Operator Demand: a new simulator module for the evaluation of signaler’s demand. In: 2016 IEEE International Conference on Intelligent Rail Transportation, 23-25 Aug 2016, Birmingham, UK. (In Press)
Golightly, David and Dadashi, Nastaran (2016) How do principles for human-centred automation apply to Disruption Management Decision Support? In: 2016 IEEE International Conference on Intelligent Rail Transportation, 23-25 Aug 2016, Birmingham, UK. (In Press)
Turner, Stuart M.R. and Bridges, John C. and Grebby, Stephen and Ehlmann, Bethany L. (2016) Hydrothermal activity recorded in post Noachian-aged impact craters on Mars. Journal of Geophysical Research: Planets, 121 (4). pp. 608-625. ISSN 2196-9100
Park, J. and Sreeja, V. and Aquino, M. and Cesaroni, C. and Spogli, L. and Dodson, A. and De Franceschi, G. (2016) Performance of ionospheric maps in support of long baseline GNSS kinematic positioning at low latitudes. Radio Science, 51 (5). pp. 429-442. ISSN 1944-799X
Basiri, Anahid and Moore, Terry and Hill, Chris (2016) The privacy concerns in location based services: protection approaches and remaining challenges. In: 9th International Symposium on Mobile Mapping Technology (MMT2015), 9-11 Dec 2015, Sydney, Australia.
Du, Heshan and Alechina, Natasha and Jackson, Mike and Hart, Glen (2016) A method for matching crowd-sourced and authoritative geospatial data. Transactions in GIS . ISSN 1361-1682
Gallagher, Michael and Beard, Maria and Clifford, M.J. and Watson, M.C. (2016) An evaluation of a biomass stove safety protocol used for testing household cookstoves, in low-middle income countries. Energy for Sustainable Development, 33 . pp. 14-25. ISSN 0973-0826
Qiao, Yaning and Dawson, Andrew and Parry, Tony and Flintsch, Gerardo W. (2016) Immediate effects of some corrective maintenance interventions on flexible pavements. International Journal of Pavement Engineering . ISSN 1029-8436
Golightly, David and Sanderson, David and Holmes, Paul and Ratchev, Svetan and Sharples, Sarah (2016) Design requirements for effective hybrid decision making with Evolvable Assembly Systems. In: European Conference on Cognitive Ergonomics, 6-8 Sept 2016, Nottingham, UK. (In Press)
Dowthwaite, Liz and Houghton, Robert J. and Mortier, Richard (2016) How relevant is copyright to online artists? A qualitative study of understandings, coping strategies and possible solutions. First Monday, 21 (5). ISSN 1396-0466
Kilsby, P. and Remenyte-Prescott, Rasa and Andrews, John D. (2016) Modelling asset management of railway overhead line equipment. In: 9th IMA International Conference on Modelling in Industrial Maintenance and Reliability (MIMAR), 12-14 July 2016, London, UK.
Lawson, Glyn and Roper, Tessa and Abdullah, Che (2016) Multimodal “sensory illusions” for improving spatial awareness in virtual environments. In: European Conference on Cognitive Ergonomics 2016. (In Press)
Ward, Michael and Tomczynska, Magdelena M. and Grant, David M. and Parsons, Andrew J. and De Focatiis, Davide S.A. (2016) The influence of process conditions on the structure and properties of melt processed poly (lactic acid) nanohydroxyapatite composites. In: 3rd International Conference on Bio-based Polymers and Composites, 28th August - 1st September 2016, Szeged, Hungary. (Submitted)
Moroni, Giovanni and Syam, Wahyudin P. and Petrò, Stefano (2016) Comparison of chaos optimization functions for performance improvement of fitting of non-linear geometries. Measurement, 86 . pp. 79-92. ISSN 0263-2241
Leach, R. (2016) Metrology for additive manufacturing. Measurement and Control, 49 (4). pp. 132-135. ISSN 0020-2940
Vafaei, Saeid and Tuck, Christopher and Ashcroft, Ian and Wildman, Ricky (2016) Surface microstructuring to modify wettability for 3D printing of nano-filled inks. Chemical Engineering Research and Design, 109 . pp. 414-420. ISSN 0263-8762
Vileiniskis, Marius and Remenyte-Prescott, Rasa and Rama, Dovile and Andrews, John (2016) Fault detection and diagnostics of a three-phase separator. Journal of Loss Prevention in the Process Industries, 41 . pp. 215-230. ISSN 0950-4230
Uguna, Clement N. and Carr, Andrew D. and Snape, Colin E. and Meredith, Will and Scotchman, Iain C. and Murray, Andrew and Vane, Christopher H. (2016) Impact of high water pressure on oil generation and maturation in Kimmeridge Clay and Monterey source rocks: implications for petroleum retention and gas generation in shale gas systems. Marine and Petroleum Geology, 73 . pp. 72-85. ISSN 1873-4073
Fang, Y. and Sójka, L. and Jayasuriya, D. and Furniss, David and Tang, Z.Q. and Markos, C. and Sujecki, S. and Seddon, Angela B. and Benson, Trevor M. (2016) Characterising refractive index dispersion in chalcogenide glasses. In: 18th International Conference on Transparent Optical Networks, 10-14 July 2016, Trento, Italy. (In Press)
Al-Fadhli, Mohammed and McNally, Donal and Branson, David (2016) Achieving powered assisted motion of the trunk without an articulated exoskeleton. In: 22nd Congress of the European Society of Biomechanics (ESB 2016), 10-13 July 2016, Lyon, France. (Unpublished)
Borsci, Simone and Lawson, Glyn and Salanitri, Davide and Jha, Bhavna (2016) When simulated environments make the difference: the effectiveness of different types of training of car service procedures. Virtual Reality, 20 (2). pp. 83-99. ISSN 1434-9957
Dadashi, Nastaran and Golightly, David and Sharples, Sarah (2016) Seeing the woods for the trees: the problem of information inefficiency and information overload on operator performance. In: 13th IFAC/IFIP/IFORS/IEA Symposium on Analysis, Design, and Evaluation of Human-Machine Systems, 30 Aug-2 Sept 2016, Kyoto, Japan. (In Press)
Gommer, F. and Endruweit, A. and Long, A.C. (2016) Quantification of micro-scale variability in fibre bundles. Composites Part A: Applied Science and Manufacturing, 87 . pp. 131-137. ISSN 1359-835X
Li, Yao and Yang, Yunming and Yu, Hai-Sui and Roberts, Gethin Wyn (2016) Monotonic direct simple shear tests on sand under multidirectional loading. International Journal of Geomechanics . ISSN 1943-5622
Yianni, Panayioti C. and Rama, Dovile and Neves, Luis C. and Andrews, John D. and Castlo, David (2016) A Petri-Net-based modelling approach to railway bridge asset management. Structure and Infrastructure Engineering . ISSN 1744-8980 (In Press)
Tsinidis, Grigorios and Heron, Charles and Madabhushi, Gopol and Pitilakis, Kyriazis (2016) Calibration of strain gauged square tunnels for centrifuge testing. Geotechnical and Geological Engineering, 34 (3). pp. 911-921. ISSN 1573-1529
Moschetti, Guiseppe and Forbes, Alistair and Leach, Richard K. and Jiang, Xiang and O'Connor, Daniel (2016) Phase and fringe order determination in wavelength scanning interferometry. Optics Express, 24 (8). pp. 8997-9012. ISSN 1094-4087
Almeida, Trevor P. and Muxworthy, Adrian R. and Kovacs, Andras and Williams, Wyn and Brown, Paul D. and Dunin-Borkowski, Rafal E. (2016) Direct visualization of the thermomagnetic behavior of pseudo-single-domain magnetite particles. Science Advances, 2 (4). e1501801. ISSN 2375-2548
Chen, H. and Jackson, G.A. and Voisey, K.T. and McCartney, D.G. (2016) Modelling and experimental study on β-phase depletion behaviour of HVOF sprayed free-standing CoNiCrA1Y coatings during oxidation. Surface and Coatings Technology, 291 . pp. 34-42. ISSN 0257-8972
Paternostro, S. and Moore, Terry and Hill, Chris and Atkin, Jason and Morvan, Herve (2016) Evaluation of advanced receiver autonomous integrity monitoring performance on predicted aircraft trajectories. In: IEEE/ION PLANS 2016, 11-14 Apr 2016, Savannah, GA.
Felli, Paolo and Logan, Brian and Sardina, Sebastian (2016) Parallel behavior composition for manufacturing. In: 25th International Joint Conference on Artificial Intelligence, 9-13 July 2016, New York, NY. (In Press)
Kamla, Jwan and Parry, Tony and Dawson, Andrew (2016) Roundabout accident prediction model: an application of random parameters negative binomial approach to roundabout accidents in the United Kingdom. Transportation Research Record, 2585 . ISSN 2169-4052 (In Press)
Yartys, Volodymyr A. and Lototskyy, Mykhaylo and Linkov, Vladimir and Grant, David and Stuart, Alastair and Eriksen, Jon and Denys, Roman and Bowman, Robert C. (2016) Metal hydride hydrogen compression: recent advances and future prospects. Applied Physics A, 122 (4). 415/1-415/18. ISSN 1432-0630
Shao, Yiming and Heath, Timothy Peter and Zhu, Yan (2016) Developing an economic estimation system for vertical farms. International Journal of Agricultural and Environmental Information Systems . ISSN 1947-3206
Chen, Sheng and Yang, Bo and Luo, Kai H. and Xiong, Xiaopeng and Zheng, Chuguang (2016) Double diffusion natural convection in a square cavity filled with nanofluid. International Journal of Heat and Mass Transfer, 95 . pp. 1070-1083. ISSN 0017-9310
Aboulkhair, Nesma T. and Maskery, Ian and Tuck, Christopher and Ashcroft, Ian and Everitt, Nicola M. (2016) On the formation of AlSi10Mg single tracks and layers in selective laser melting: microstructure and nano-mechanical properties. Journal of Materials Processing Technology, 230 . pp. 88-98. ISSN 0924-0136
Chakladar, N. D and Harper, Lee Thomas and Parsons, A. J. (2016) Optimisation of composite bone plates for ulnar transverse fractures. Journal of the Mechanical Behavior of Biomedical Materials, 57 . pp. 334-346. ISSN 1751-6161
Madanayakea, Buddhike Neminda and Gan, Suyin and Eastwick, Carol and Ng, Hoon Kiat (2016) Thermochemical and structural changes in Jatropha curcas seed cake during torrefaction for its use as coal co-firing feedstock. Energy, 100 . pp. 262-272. ISSN 0360-5442
Booth, Andrew J. and Marshall, Alec M. and Stace, Rod (2016) Probabilistic analysis of a coal mine roadway including correlation control between model input parameters. Computers and Geotechnics, 74 . pp. 151-162. ISSN 0266-352X
Shah, Darshil U. and Nag, Ranajit K. and Clifford, M.J. (2016) Why do we observe significant differences between measured and ‘back-calculated’ properties of natural fibres? Cellulose . pp. 1-10. ISSN 1572-882X
Altomonte, Sergio and Logan, Brian and Feisst, Markus and Rutherford, Peter and Wilson, Robin (2016) Interactive and situated learning in education for sustainability. International Journal of Sustainability in Higher Education, 17 (3). pp. 417-443. ISSN 1467-6370
Warburton, J.R. and Lu, G. and Buss, T.M. and Docx, H. and Matveev, Mikhail Y. and Jones, I.A. (2016) Digital image correlation vibrometry with low speed equipment. Experimental Mechanics . ISSN 1741-2765 (In Press)
Kuryzheva, Olga and Nerukh, Alexander and Benson, Trevor M. (2016) Resonances excited by an airy pulse in a dielectric layer. In: 24th International Workshop on Optical Wave & Waveguide Theory and Numerical Modelling (OWTNM 2016), 20-21 May 2016, Warsaw, Poland.
Maskery, Ian and Hussey, Alexandra and Panesar, Ajit and Aremu, Adedeji and Tuck, Christopher and Ashcroft, Ian and Hague, Richard (2016) An investigation into reinforced and functionally graded lattice structures. Journal of Cellular Plastics . ISSN 0021-955X
Matos, José C. and Cruz, Paulo J.S. and Valente, Isabel B. and Neves, Luís C. and Moreira, Vicente N. (2016) An innovative framework for probabilistic-based structural assessment with an application to existing reinforced concrete structures. Engineering Structures, 111 . pp. 552-564. ISSN 0141-0296
Silva, A. and Neves, L. C. and Gaspar, P. L. and de Brito, J. (2016) Probabilistic transition of condition: render facades. Building Research & Information, 44 (3). pp. 301-318. ISSN 0961-3218
Zacharzewski, Piotr and Simmons, Kathy and Jefferson-Loveday, Richard and Capone, Luigi (2016) Evaluation of the SST-SAS model for prediction of separated flow inside turbine internal cooling passages. In: ASME 2016 Turbo Expo, 13-17 Jun 2016, Seoul, South Korea. (In Press)
Isa, Khairuddin Md and Snape, Colin E. and Uguna, Clement N. and Meredith, Will and Deng, Hui (2016) Pyrolysis oil upgrading in high conversions using sub- and supercritical water above 400°C. Journal of Analytical and Applied Pyrolysis, 119 . pp. 180-188. ISSN 0165-2370
Xie, Liujuan and Sun, Yongge and Uguna, Clement N. and Li, Youchuan and Snape, Colin E. and Meredith, Will (2016) Thermal cracking of oil under water pressure up to 900 bar at high thermal maturities. 1. gas compositions and carbon isotopes. Energy & Fuels, 30 (4). pp. 2617-2627. ISSN 1520-5029
Jefferson-Loveday, Richard J. (2016) Differential equation-based specification of turbulence integral length scales for cavity flows. In: ASME 2016 Turbo Expo, 13-17 Jun 2016, Seoul, South Korea. (In Press)
Wang, Qingfeng and Sun, Xu and Cobb, Sue and Lawson, Glyn and Sharples, Sarah (2016) 3D printing system: an innovation for small-scale manufacturing in home settings? – early adopters of 3D printing systems in China. International Journal of Production Research . pp. 1-16. ISSN 1366-588X
Jing, Hao and Pinchin, James and Hill, Chris and Moore, Terry (2016) An adaptive weighting based on modified DOP for collaborative indoor positioning. Journal of Navigation, 69 (02). pp. 225-245. ISSN 0373-4633
Evans, Paul L. and Castellazzi, Alberto and Johnson, C. Mark (2016) Design tools for rapid multidomain prototyping of power electronic systems. IEEE Transactions on Power Electronics, 31 (3). pp. 2443-2455. ISSN 0885-8993
Castellazzi, Alberto and Fayyaz, Asad and Romano, G. and Yang, Li and Riccio, M. and Irace, A. (2016) SiC power MOSFETs performance, robustness and technology maturity. Microelectronics Reliability, 58 . pp. 164-176. ISSN 0026-2714
Vileiniskis, Marius and Remenyte-Prescott, Rasa and Rama, Dovile (2016) A fault detection method for railway point systems. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 230 (3). pp. 852-865. ISSN 2041-3017
Chen, Han-Mei and Yu, Hai-Sui and Smith, Martin J. (2016) Physical model tests and numerical simulation for assessing the stability of brick-lined tunnels. Tunnelling and Underground Space Technology, 53 . pp. 109-119. ISSN 0886-7798
Sarker, S. and Chandra, D. and Hirscher, M. and Dolan, M. and Isheim, D. and Wermer, J. and Viano, D. and Baricco, M. and Udovic, T.J. and Grant, D. and Palumbo, O. and Paolone, A. and Cantelli, R. (2016) Developments in the Ni–Nb–Zr amorphous alloy membranes. Applied Physics A, 122 (3). 168/1-168/9. ISSN 1432-0630
Laybourn, Andrea and Katrib, Juliano and Palade, Paula A. and Easun, Timothy L. and Champness, Neil R. and Schröder, Martin and Kingman, Samuel W. (2016) Understanding the electromagnetic interaction of metal organic framework reactants in aqueous solution at microwave frequencies. Physical Chemistry Chemical Physics, 18 (7). pp. 5419-5431. ISSN 1463-9084
Athanasiou, Giorgos S. and Ernst, Johanna and Furniss, David and Benson, Trevor M. and Chauhan, Jasbinder and Middleton, John and Parmenter, Chris and Fay, Mike W. and Neate, Nigel C. and Shiryaev, Vladimir and Churbanov, Mikhail F. and Seddon, Angela B. (2016) Toward mid-infrared, subdiffraction, spectral-mapping of human cells and tissue: SNIM (scanning near-field infrared microscopy) tip fabrication. Journal of Lightwave Technology, 34 (4). 1212 -1219. ISSN 1558-2213
Felfel, R.M. and Poocza, Leander and Gimeno-Fabra, Miquel and Milde, Tobias and Hildebrand, Gerhard and Ahmed, Ifty and Scotchford, Colin and Sottile, Virginie and Grant, David M. and Liefeith, Klaus (2016) In vitro degradation and mechanical properties of PLA-PCL copolymer unit cell scaffolds generated by two-photon polymerization. Biomedical Materials, 11 (1). 015011. ISSN 1748-605X
Mbah, Afamefuna Maduka and Walker, John G. and Phillips, Andrew J. (2016) Performance evaluation of turbulence-accentuated interchannel crosstalk for hybrid fibre and free-space optical wavelength-division-multiplexing systems using digital pulse-position modulation. IET Optoelectronics, 10 (1). pp. 11-20. ISSN 1751-8776
Richardson, Terri and Hill, Chris and Moore, Terry and Toor, Pieter (2016) Analysis of multi-constellation GNSS signal quality. In: 2016 International Technical Meeting of The Institute of Navigation, 25-28 Jan 2016, Monterey, California.
Parthasarathy, Shridharan and Mohammed, Rafie Rushdy and Fong, Chong Mei and Gomes, R.L. and Manickam, Sivakumar (2016) A novel hybrid approach of activated carbon and ultrasound cavitation for the intensification of palm oil mill effluent (POME) polishing. Journal of Cleaner Production, 112 (1). pp. 1218-1226. ISSN 1879-1786
Kefalidou, Genovefa and Sharples, Sarah (2016) Encouraging serendipity in research: designing technologies to support connection-making. International Journal of Human-Computer Studies, 89 . pp. 1-23. ISSN 1071-5819
Jing, Hao and Bonenberg, Lukasz Kosma and Pinchin, James and Hill, Chris and Moore, Terry (2016) Detection of UWB ranging measurement quality for collaborative indoor positioning. Journal of Location Based Services, 9 (4). pp. 296-319. ISSN 1748-9725
Tosello, G. and Haitjema, H. and Leach, Richard K. and Quagliotti, D. and Gasparin, S. and Hansen, H.N. (2016) An international comparison of surface texture parameters quantification on polymer artefacts using optical instruments. CIRP Annals - Manufacturing Technology, 65 (1). pp. 529-532. ISSN 0007-8506
Elmer, Theo and Worall, Mark and Wu, Shenyi and Riffat, Saffa (2016) An experimental study of a novel integrated desiccant air conditioning system for building applications. Energy and Buildings, 111 . pp. 434-445. ISSN 0378-7788
Solomon, Adane Kassa and Skuriat, Robert and Castellazzi, Alberto and Wheeler, Pat (2016) Modular integration of a matrix converter. IEEJ Transactions on Electrical and Electronic Engineering, 11 (1). pp. 103-111. ISSN 1931-4973
Parthasarathy, Shridharan and Gomes, R.L. and Manickam, Sivakumar (2016) Process intensification of anaerobically digested palm oil mill effluent (AAD-POME) treatment using combined chitosan coagulation, hydrogen peroxide (H2O2) and Fenton’s oxidation. Clean Technologies and Environmental Policy, 18 (1). pp. 219-230. ISSN 1618-9558
Kealy, Allison and Retscher, Guenther and Toth, Charles and Hasnur-Rabiain, Azmir and Gikas, Vassilis and Grejner-Brzezinska, Dorota and Danezis, Chris and Moore, Terry (2016) Collaborative navigation as a solution for PNT applications in GNSS challenged environments: report on field trials of a joint FIG / IAG working group. Journal of Applied Geodesy, 9 (4). pp. 244-263. ISSN 1862-9016
Maskery, Ian and Aboulkhair, N.T. and Corfield, M.R. and Tuck, Christopher and Clare, A.T. and Leach, R.K. and Wildman, R. and Ashcroft, I.A. and Hague, R.J.M. (2016) Quantification and characterisation of porosity in selectively laser melted Al–Si10–Mg using x-ray computed tomography. Materials Characterization, 111 . pp. 193-204. ISSN 1873-4189
Basiri, Anahid and Amirian, Pouria and Winstanley, Adam and Marsh, Stuart and Moore, Terry and Gales, Guillaume (2016) Seamless pedestrian positioning and navigation using landmarks. Journal of Navigation, 69 (01). pp. 24-40. ISSN 0373-4633
Sharaf, Safa and van der Meulen, G. Peter and Agunlejika, Ezekiel O. and Azzopardi, Barry J. (2016) Structures in gas–liquid churn flow in a large diameter vertical pipe. International Journal of Multiphase Flow, 78 . pp. 88-103. ISSN 0301-9322
Madanayake, Buddhike Neminda and Gan, Suyin and Eastwick, Carol and Ng, Hoon Kiat (2016) Leaching as a pretreatment process to complement torrefaction in improving co-firing characteristics of Jatropha curcas seed cake. Waste and Biomass Valorization . ISSN 1877-2641
Basiri, Anahid and Jackson, Mike and Amirian, Pouria and Pourabdollah, Amir and Sester, Monika and Winstanley, Adam and Moore, Terry and Zhang, Lijuan (2016) Quality assessment of OpenStreetMap data using trajectory mining. Geo-spatial Information Science, 19 (1). pp. 56-68. ISSN 1009-5020
Sousa, Hélder S. and Branco, Jorge M. and Lourenço, Paulo B. and Neves, Luís C. (2015) Inference on stiffness and strength of existing chestnut timber elements using Hierarchical Bayesian Probability Networks. Materials and Structures . pp. 1-16. ISSN 1871-6873
McKechnie, Jon and Pourbafrani, Mohammad and Saville, Bradley A. and MacLean, Heather L. (2015) Environmental and financial implications of ethanol as a bioethylene feedstock versus as a transportation fuel. Environmental Research Letters, 10 (12). p. 124018. ISSN 1748-9326
Cesaroni, Claudio and Spogli, Luca and Alfonsi, Lucilla and De Franceschi, Giorgiana and Ciraolo, Luigi and Galera Monico, Joao Francisco and Scotto, Carlo and Romano, Vincenzo and Aquino, Marcio and Bougard, Bruno (2015) L-band scintillations and calibrated total electron content gradients over Brazil during the last solar maximum. Journal of Space Weather and Space Climate, 5 . A36/1-A36/11. ISSN 2115-7251
Blaxter, L.L. and Morris, David E. and Crowe, John A. and Henry, C. and Hill, Stephen J. and Sharkey, Don and Vyas, H. and Hayes-Gill, Barrie R. (2015) An automated quasi-continuous capillary refill timing device. Physiological Measurement, 37 (1). ISSN 1361-6579
Bertola, Luca and Cox, Tom and Wheeler, Patrick and Garvey, Seamus D. and Morvan, Herve (2015) Electromagnetic launch systems for civil aircraft assisted take-off. Archives of Electrical Engineering, 64 (4). pp. 535-546. ISSN 2300-2506
D’Angelo, G. and Spogli, L. and Cesaroni, C. and Sgrigna, V. and Alfonsi, L. and Aquino, M.H.O. (2015) GNSS data filtering optimization for ionospheric observation. Advances in Space Research, 56 (11). pp. 2552-2562. ISSN 1879-1948
Batchelor, A.R. and Jones, D.A. and Plint, S. and Kingman, S.W. (2015) Deriving the ideal ore texture for microwave treatment of metalliferous ores. Minerals Engineering, 84 . pp. 116-129. ISSN 0892-6875
Qiao, Yaning and Dawson, Andrew and Parry, Tony and Flintsch, Gerardo W. (2015) Evaluating the effects of climate change on road maintenance intervention strategies and Life-Cycle Costs. Transportation Research: Part D, 41 . pp. 492-503. ISSN 1361-9209
Kakade, Rohan and Walker, John G. and Phillips, Andrew J. (2015) Optimising performance of a confocal fluorescence microscope with a differential pinhole. Measurement Science and Technology, 27 (1). ISSN 1361-6501
Basiri, Anahid and Moore, Terry and Hill, Chris and Bhatia, Paul (2015) Indoor location based services market drivers and challenges. In: International Conference on Location Based Services (LBS 2015), 16-18 September 2015, Augsburg, Germany.
Amirian, Pouria and Basiri, Anahid and Van Loggerenberg, Francois and Moore, Terry and Lang, Trudie and Varga, Margaret (2015) Intersection of geospatial big data, geocomputation and cloud computing. In: ICA European Symposium on Cartography (EuroCarto2015), 10-12 November 2015, Vienna, Austria.
Yang, Chao and Remenyte-Prescott, Rasa and Andrews, John (2015) Road maintenance planning using network flow modelling. IMA Journal of Management Mathematics . ISSN 1471-6798
Elmer, Theo and Worall, Mark and Wu, Shenyi and Riffat, Saffa B. (2015) Emission and economic performance assessment of a solid oxide fuel cell micro-combined heat and power system in a domestic building. Applied Thermal Engineering, 90 . pp. 1082-1089. ISSN 1359-4311
Figueiredo e Silva, Pedro and Basiri, Anahid and Lohan, Elena Simona and Pinchin, James and Hill, Chris and Moore, Terry (2015) On the impact of intra-system interference for ranging and positioning with Bluetooth low energy. In: 5th International Workshop on Mobile Entity Localization and Tracking in GPS-Less Environments (MELT 2015), 3-6 Nov 2015, Seattle, Washington, USA.
Mezani, S. and Hamiti, Tahar and Belguerras, L. and Lubin, T. and Rashed, Mohamed and Gerada, C. (2015) Magnetically geared induction machines. IEEE Transactions on Magnetics, 51 (11). p. 8111404. ISSN 0018-9464
Panesar, A. and Brackett, D. and Ashcroft, I. and Wildman, Ricky D. and Hague, R. (2015) Design framework for multifunctional additive manufacturing: placement and routing of three-dimensional printed circuit volumes. Journal of Mechanical Design, 137 (11). 111414/1-111414/10. ISSN 1528-9001
Sarkar, Raju and Dawson, A.R. (2015) Economic assessment of use of pond ash in pavements. International Journal of Pavement Engineering . pp. 1-17. ISSN 1029-8436
Chronopoulos, Dimitrios (2015) Design optimization of composite structures operating in acoustic environments. Journal of Sound and Vibration, 355 . pp. 322-344. ISSN 0022-460X
Jing, Hao and Pinchin, James and Hill, Chris and Moore, Terry (2015) Wi-Fi fingerprinting based on collaborative confidence level training. Pervasive and Mobile Computing . ISSN 1574-1192
Helal, M.A. and Bull, S. and Kaunga-Nyirenda, S.N. and Lim, J.J. and Larkins, E.C. (2015) Self-consistent simulation of high-brightness diode lasers with external optical feedback. In: 2015 IEEE High Power Diode Lasers and Systems Conference (HPD), 14-15 October 2015, Coventry, United Kingdom.
Chiarelli, A. and Dawson, A. R. and García, A. (2015) Stochastic generation of virtual air pores in granular materials. Granular Matter, 17 (5). pp. 617-627. ISSN 1434-5021
Heller, Valentin and Spinneken, Johannes (2015) On the effect of the water body geometry on landslide–tsunamis: physical insight from laboratory tests and 2D to 3D wave parameter transformation. Coastal Engineering, 104 . pp. 113-134. ISSN 0378-3839
Basiri, Anahid and Marsh, Stuart and Moore, Terry and Amiran, Pouria (2015) Automatic detection of points of interest using spatio-temporal data mining. Journal of Mobile Multimedia, 11 (3&4). pp. 193-204. ISSN 1550-4646
Russell, J.M. and Owen, J.S. and Hajirasouliha, I. (2015) Experimental investigation on the dynamic response of RC flat slabs after a sudden column loss. Engineering Structures, 99 . pp. 28-41. ISSN 0141-0296
Sabatini, Roberto and Moore, Terry and Hill, Chris and Ramasamy, Subramanian (2015) Investigation of GNSS integrity augmentation synergies with unmanned aircraft sense-and-avoid systems. In: SAE 2015 AeroTech Congress and Exhibition, 22-24 Sept 2015, Seattle, Washington, USA.
Chiarelli, A. and Dawson, A.R. and García, A. (2015) Parametric analysis of energy harvesting pavements operated by air convection. Applied Energy, 154 . pp. 951-958. ISSN 0306-2619
Zeghloul, Ammar and Azzi, Abdelwahid and Saidj, Faiza and Azzopardi, Barry J. and Hewakandamby, Buddhika (2015) Interrogating the effect of an orifice on the upward two-phase gas–liquid flow behavior. International Journal of Multiphase Flow, 74 . pp. 96-105. ISSN 0301-9322
Lu, Jiawa and Sun, Wei and Becker, Adib A. and Saad, Abdullah Aziz (2015) Simulation of the fatigue behaviour of a power plant steel with a damage variable. International Journal of Mechanical Sciences, 100 . pp. 145-157. ISSN 0020-7403
Maskery, Ian and Aremu, A.O. and Simonelli, M. and Tuck, Christopher and Wildman, Ricky D. and Ashcroft, I.A. and Hague, R.J.M. (2015) Mechanical properties of Ti-6Al-4V selectively laser melted parts with body-centred-cubic lattices of varying cell size. Experimental Mechanics, 55 (7). pp. 1261-1272. ISSN 1741-2765
Katrib, Juliano and Folorunso, Olaosebikan and Dodds, Christopher and Dimitrakis, Georgios and Kingman, Sam W. (2015) Improving the design of industrial microwave processing systems through prediction of the dielectric properties of complex multi-layered materials. Journal of Materials Science, 50 (23). pp. 7591-7599. ISSN 1573-4803
Moghaddas Tafreshi, S.N. and Shaghaghi, T. and Tavakoli Mehrjardi, Gh. and Dawson, A.R. and Ghadrdan, M. (2015) A simplified method for predicting the settlement of circular footings on multi-layered geocell-reinforced non-cohesive soils. Geotextiles and Geomembranes, 43 (4). pp. 332-344. ISSN 02661144
Aboulkhair, Nesma T. and Tuck, Christopher and Ashcroft, Ian and Maskery, Ian and Everitt, Nicola M. (2015) On the precipitation hardening of selective laser melted AlSi10Mg. Metallurgical and Materials Transactions A, 46 (8). pp. 3337-3341. ISSN 1073-5623
Heller, Valentin (2015) Composite modelling of the effect of the water body geometry on landslide-tsunamis. In: 36th IAHR World Congress, 28 Jun - 03 Jul 2015, Delft, the Netherlands.
Maclean, Jessica O. and Hodson, Jonathan R. and Voisey, K.T. (2015) Laser drilling of via micro-holes in single-crystal semiconductor substrates using a 1070 nm fibre laser with millisecond pulse widths. Proceedings of SPIE. Industrial Laser Applications Symposium (ILAS 2015), 9657 (965701). ISSN 0277-786X
Aboulkhair, Nesma T. and Tuck, Christopher and Maskery, Ian and Ashcroft, Ian and Everitt, Nicola (2015) Nano-hardness and microstructure of selective laser melted AlSi10Mg scan tracks. In: Industrial Laser Applications Symposium (ILAS 2015), 17-18 March 2015, Kenilworth, UK.
Lee, Siah Lee and Chong, Mei Fong and Robinson, John P. and Binner, Eleanor (2015) Optimisation of extraction and sludge dewatering efficiencies of bio-flocculants extracted from Abelmoschus esculentus (okra). Journal of Environmental Management, 157 . pp. 320-325. ISSN 1095-8630
Soldatos, D. and Triantafyllou, Savvas P. and Chatzi, Eleni N. (2015) On the constitutive modeling of dual-phase steels at finite strains: a generalized plasticity based approach. In: Forming Technology Forum 2015, 29-30 June 2015, Zurich, Switzerland.
Reed, Sean and Remenyte-Prescott, Rasa and Rees, Ben (2015) Reliability assessment techniques for medical procedures. In: 21st Advances in Risk and Reliability Technology Symposium 2015, 23-25 June 2015, Loughborough, UK.
Basiri, Anahid and Peltola, Pekka and Figueiredo e Silva, Pedro and Lohan, Elena Simona and Moore, Terry and Hill, Chris (2015) Indoor positioning technology assessment using analytic hierarchy process for pedestrian navigation services. In: 2015 International Conference on Location and GNSS (ICL-GNSS), 22nd June 2015 - 24th June 2015, Gothenburg.
Simmons, Kathy and Johnson, Graham (2015) Velocity measurements in the vicinity of the exit and inlet of a spiral bevel gear shroud. In: ASME Turbo Expo 2015: Turbine Technical Conference and Exposition, 15-19 June 2015, Montreal, Canada.
Sabatini, Roberto and Moore, Terry and Hill, Chris and Ramasamy, Subramanian (2015) Assessing avionics-based GNSS integrity augmentation performance in UAS mission- and safety-critical tasks. In: 2015 International Conference on Unmanned Aircraft Systems (ICUAS), 9-12 June 2015, Denver, Colorado, USA.
Degano, Michele and Carraro, M. and Bianchi, Nicola (2015) Selection criteria and robust optimization of a traction PM-Assisted Synchronous Reluctance motor. IEEE Transactions on Industry Applications, 51 (6). pp. 4383-4391. ISSN 1939-9367
Jin, X. and Shipway, P.H. and Sun, W. (2015) The role of frictional power dissipation (as a function of frequency) and test temperature on contact temperature and the subsequent wear behaviour in a stainless steel contact in fretting. Wear, 330 . pp. 103-111. ISSN 1873-2577
Qiao, Yaning and Dawson, Andrew and Huvstig, Anders and Korkiala-Tanttu, Leena (2015) Calculating rutting of some thin flexible pavements from repeated load triaxial test data. International Journal of Pavement Engineering, 16 (6). pp. 467-476. ISSN 1029-8436
Munro, Richard J. and Hewitt, R.E and Foster, M.R. (2015) On the formation of axial corner vortices during spin-up in a cylinder of square cross-section. Journal of Fluid Mechanics, 772 . pp. 246-271. ISSN 1469-7645
Yang, Chao and Remenyte-Prescott, Rasa and Andrews, John (2015) Application of network traffic flow model to road maintenance. Proceedings of the ICE - Transport, 168 (3). pp. 256-266. ISSN 1751-7710
Xiang, Yetao and Gan, Guohui (2015) Optimization of building-integrated photovoltaic thermal air system combined with thermal storage. International Journal of Low-Carbon Technologies, 10 (2). pp. 146-156. ISSN 1748-1325
Perrat, Bertrand and Smith, Martin J. and Mason, Barry S. and Rhodes, James M. and Goosey-Tolfrey, Victoria L. (2015) Quality assessment of an Ultra-Wide Band positioning system for indoor wheelchair court sports. Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, 229 (2). pp. 81-91. ISSN 1754-338X
Buttress, A.J. and Jones, D.A. and Dodds, Chris and Dimitrakis, Georgios and Dawson, Andrew and Kingman, S.W. (2015) Understanding the scabbling of concrete using microwave energy. Cement and Concrete Research, 75 . pp. 75-90. ISSN 0008-8846
Warmuth, A.R. and Shipway, P.H. and Sun, W. (2015) Fretting wear mapping: the influence of contact geometry and frequency on debris formation and ejection for a steel-on-steel pair. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 471 (2178). pp. 1-22. ISSN 1471-2946
Hamad, W.I. and Owen, J.S. and Hussein, M.F.M. (2015) Modelling the degradation of vibration characteristics of reinforced concrete beams due to flexural damage. Structural Control and Health Monitoring, 22 (6). pp. 939-967. ISSN 1545-2255
Chiarelli, A. and Dawson, A.R. and García, A. (2015) Generation of virtual asphalt mixture porosity for computational modelling. Powder Technology, 275 . pp. 351-360. ISSN 0032-5910
Heron, Charles and Haigh, S.K. and Madabhushi, S.P.G. (2015) A new macro-element model encapsulating the dynamic moment-rotation behaviour of raft foundations. Geotechnique, 65 (5). pp. 442-451. ISSN 1751-7656
Tsinidis, Grigorios and Pitilakis, Kyriazis and Madabhushi, Gopol and Heron, Charles (2015) Dynamic response of flexible square tunnels: centrifuge testing and validation of existing design methodologies. Geotechnique, 65 (5). pp. 401-417. ISSN 1751-7656
Barney, Emma R. and Hannon, Alex C. and Holland, Diane and Umesaki, Norimasa and Tatsumisago, Masahiro (2015) Alkali environments in tellurite glasses. Journal of Non-Crystalline Solids, 414 . pp. 33-41. ISSN 1873-4812
Rohuma, Wesam and Zanchetta, Pericle and Wheeler, Patrick and Empringham, Lee (2015) A four-legs matrix converter ground power unit with repetitive voltage control. IEEE Transactions on Industrial Electronics, 62 (4). pp. 2032-2040. ISSN 1557-9948
Rhodes, James M. and Mason, Barry S. and Perrat, Bertrand and Smith, Martin J. and Malone, Laurie A. and Goosey-Tolfrey, Victoria L. (2015) Activity profiles of elite wheelchair rugby players during competition. International Journal of Sports Physiology and Performance, 10 (3). pp. 318-324. ISSN 1555-0273
McKechnie, Jon and Pourbafrani, Mohammad and Saville, Bradley A. and MacLean, Heather L. (2015) Exploring impacts of process technology development and regional factors on life cycle greenhouse gas emissions of corn stover ethanol. Renewable Energy, 76 . pp. 726-734. ISSN 1879-0682
Kent, M.G. and Altomonte, Sergio and Tregenza, P.R. and Wilson, R. (2015) Temporal variables and personal factors in glare sensation. Lighting Research and Technology . ISSN 1477-0938
Sarce, Fernando and Hall, Matthew R. and Sangchoom, Wantana and Mokaya, Robert (2015) A hygrothermal modelling approach to water vapour sorption isotherm design for mesoporous humidity buffers. Microporous and Mesoporous Materials, 211 . pp. 113-123. ISSN 1387-1811
Yang, Chao and Remenyte-Prescott, Rasa and Andrews, John D. (2015) Pavement maintenance scheduling using genetic algorithms. International Journal of Performability Engineering, 11 (2). pp. 135-152. ISSN 0973-1318
Sabatini, Roberto and Moore, Terry and Hill, Chris and Subramanian, Ramasamy (2015) Avionics-based GNSS integrity augmentation performance in a jamming environment. In: AIAC16: 16th Australian International Aerospace Congress, 23-24 February 2015, Melbourne, Australia.
Nieto, F. and Hargreaves, David Michael and Owen, John S. and Hernández, S. (2015) On the applicability of 2D URANS and SST k-ω turbulence model to the fluid-structure interaction of rectangular cylinders. Engineering Applications of Computational Fluid Mechanics, 9 (1). pp. 157-173. ISSN 1994-2060
Sabatini, Roberto and Moore, Terry and Hill, Chris (2015) Assessing GNSS integrity augmentation techniques in UAV sense-and-avoid architectures. In: AIAC16: 16th Australian International Aerospace Congress, 23-24 February 2015, Melbourne, Australia.
Amankwah, Emmanuel K. and Watson, A.J. and Wheeler, Patrick and Clare, Jon C. (2015) Control of a hybrid modular multilevel converter during grid voltage unbalance. In: 11th International Conference on AC and DC Power Transmission, 10-12 Feb 2015, Birmingham, UK.
Elmer, Theo and Worall, Mark and Wu, Shenyi and Riffat, Saffa B. (2015) Fuel cell technology for domestic built environment applications: state of-the-art review. Renewable and Sustainable Energy Reviews, 42 . pp. 913-931. ISSN 1364-0321
Buttress, A.J. and Jones, D.A. and Kingman, S.W. (2015) Microwave processing of cement and concrete materials - towards an industrial reality? Cement and Concrete Research, 68 . pp. 112-123. ISSN 0008-8846
Abdelatif, Amged O. and Owen, John S. and Hussein, Mohammed F.M. (2015) Modelling the prestress transfer in pre-tensioned concrete elements. Finite Elements in Analysis and Design, 94 . pp. 47-63. ISSN 0168-874X
Robinson, John and Dodds, Chris and Stavrinides, Alexander and Kingman, Sam and Katrib, Juliano and Wu, Zhiheng and Medrano, Jose and Overend, Ralph (2015) Microvawe pyrolysis of biomass: control of process parameters for high pyrolysis oil yields and enhanced oil quality. Energy and Fuels, 29 (3). pp. 1701-1709. ISSN 1520-5029
Hale, Jonathan (2015) Found spaces and material memory: remarks on the thickness of time in architecture. In: The material imagination: reveries on architecture and matter. Ashgate, Farnham, Surrey, pp. 169-180. ISBN 978-1-4724-2458-7
Du, Heshan and Nguyen, Hai Hoang and Alechina, Natasha and Logan, Brian and Jackson, Mike and Goodwin, John (2015) Using qualitative spatial logic for validating crowd-sourced geospatial data. In: Innovative Applications of Artificial Intelligence (IAAI-15), 25-29 Jan 2015, Austin, Texas, USA.
Nieto, F. and Owen, J.S. and Hargreaves, D.M. and Hernández, S. (2015) Bridge deck flutter derivatives: efficient numerical evaluation exploiting their interdependence. Journal of Wind Engineering and Industrial Aerodynamics, 136 . pp. 138-150. ISSN 0167-6105
Hermawati, Setia and Lawson, Glyn and D'Cruz, Mirabelle and Arlt, Frank and Apold, Judith and Andersson, Lina and Lövgren, Maria Gink and Malmsköld, Lennart (2015) Understanding the complex needs of automotive training at final assembly lines. Applied Ergonomics, 46,Pt.A . pp. 144-157. ISSN 0003-6870
Uguna, Clement N. and Carr, Andrew D. and Snape, Colin E. and Meredith, Will (2015) High pressure water pyrolysis of coal to evaluate the role of pressure on hydrocarbon generation and source rock maturation at high maturities under geological conditions. Organic Geochemistry, 78 . pp. 44-51. ISSN 0146-6380
Basiri, Anahid and Moore, Terry and Hill, Chris and Bhatia, Paul (2015) Challenges of Location-Based Services market analysis: current market description. In: Progress in Location-Based Services 2014. Lecture Notes in Geoinformation and Cartography . Springer International Publishing, Switzerland, pp. 273-282. ISBN 978-3-319-11879-6
Dhowre, Hala S. and Rajput, Sunil and Russell, Noah A. and Zelzer, Mischa (2015) Responsive cell–material interfaces. Nanomedicine, 10 (5). pp. 849-871. ISSN 1743-5889
Sabatini, Roberto and Moore, Terry and Hill, Chris (2014) GNSS avionics-based integrity augmentation for RPAS detect-and-avoid applications. In: Fourth Australasian Unmanned Systems Conference, 2014 (ACUS 2014), 10-12 Dec 2014, Melbourne, Australia.
Hermawati, Setia and Lawson, Glyn and Sutarto, Auditya Purwandini (2014) Mapping ergonomics application to improve SMEs working condition in industrially developing countries: a critical review. Ergonomics, 57 (12). pp. 1771-1794. ISSN 0014-0139
Lee, Chai Siah and Chong, Mei Fong and Robinson, John P. and Binner, Eleanor (2014) A review on development and application of plant-based bioflocculants and grafted bioflocculants. Industrial and Engineering Chemisty Research, 53 (48). pp. 18357-18369. ISSN 0888-5885
Cherdantsev, Andrey V. and Hann, David B. and Azzopardi, Barry J. (2014) Study of gas-sheared liquid film in horizontal rectangular duct using high-speed LIF technique: three-dimensional wavy structure and its relation to liquid entrainment. International Journal of Multiphase Flow, 67 . pp. 52-64. ISSN 0301-9322
McKechnie, Jon and Colombo, Steve and MacLean, Heather L. (2014) Forest carbon accounting methods and the consequences of forest bioenergy for national greenhouse gas emissions inventories. Environmental Science & Policy, 44 . pp. 164-173. ISSN 1873-6416
Gan, Guohui (2014) Dynamic interactions between the ground heat exchanger and environments in earth–air tunnel ventilation of buildings. Energy and Buildings, 85 . pp. 12-22. ISSN 0378-7788
Hermawati, Setia and Lawson, Glyn (2014) Managing obesity through mobile phone applications: a state-of-the-art review from a user-centred design perspective. Personal and Ubiquitous Computing, 18 (8). pp. 2003-2023. ISSN 1617-4917
Azzopardi, Barry J. and Ijioma, Amadi and Yang, Shounan and Abdulkareem, Lokman A. and Azzi, Abdelwahid and Abdulkadir, Mukhtar (2014) Persistence of frequency in gas–liquid flows across a change in pipe diameter or orientation. International Journal of Multiphase Flow, 67 . pp. 22-31. ISSN 0301-9322
Farrant, Andrew R. and Noble, Stephen R. and Barron, A.J. Mark and Self, Charles A. and Grebby, Stephen (2014) Speleothem U-series constraints on scarp retreat rates and landscape evolution: an example from the Severn valley and Cotswold Hills gull-caves, UK. Journal of the Geological Society, 172 . pp. 63-76. ISSN 0016-7649
Pearson, S.R. and Shipway, P.H. (2014) Is the wear coefficient dependent upon slip amplitude in fretting?: Vingsbo and Söderberg revisited. Wear, 330 . pp. 93-102. ISSN 1873-2577
Grebby, Stephen and Cunningham, Dickson and Tansey, Kevin and Naden, Jonathan (2014) The impact of vegetation on lithological mapping using airborne multispectral data: a case study for the North Troodos Region, Cyprus. Remote Sensing, 6 (11). pp. 10860-10887. ISSN 2072-4292
Robinson, John P. and Binner, Eleanor and Saeid, Abdul and Al-Harahsheh, Mohammad and Kingman, S.W. (2014) Microwave processing of oil sands and contribution of clay minerals. Fuel, 135 . pp. 153-161. ISSN 1873-7153
Carroll, S.P. and Owen, J.S. and Hussein, M.F.M. (2014) Experimental identification of the lateral human–structure interaction mechanism and assessment of the inverted-pendulum biomechanical model. Journal of Sound and Vibration, 333 (22). pp. 5865-5884. ISSN 0022-460X
Almeida, Trevor P. and Kasama, Takeshi and Muxworthy, Adrian R. and Williams, Wyn and Nagy, Lesleis and Hansen, Thomas W. and Dunin-Borkowski, Rafal E. (2014) Visualized effect of oxidation on magnetic recording fidelity in pseudo-single-domain magnetite particles. Nature Communications, 5 (5154). pp. 1-6. ISSN 2041-1723
Aboulkhair, Nesma T. and Everitt, Nicola M. and Ashcroft, Ian and Tuck, Christopher (2014) Reducing porosity in AlSi10Mg parts processed by selective laser melting. Additive Manufacturing, 1-4 . pp. 77-86. ISSN 2214-8604
Giuliani, F. and Dipankar, D. and Delmonte, N. and Castellazzi, A. and Cova, P. (2014) Robust snubberless soft-switching power converter using SiC power MOSFETs and bespoke thermal design. Microelectronics Reliability, 54 (9-10). pp. 1916-1920. ISSN 0026-2714
Andrews, John and Prescott, Darren and De Rozières, Florian (2014) A stochastic model for railway track asset management. Reliability Engineering and System Safety, 130 . pp. 76-84. ISSN 0951-8320
Kattimeri, Athina and Scase, Matthew M. (2014) Turbulent ‘stopping plumes’ and plume pinch-off in uniform surroundings. Environmental Fluid Mechanics, 15 (5). pp. 923-937. ISSN 1567-7419
Dawson, Andrew (2014) Anticipating and responding to pavement performance as climate changes. In: Climate Change, Energy, Sustainability and Pavements. Green energy and technology . Springer, Heidelberg, pp. 127-157. ISBN 978-3-662-44718-5
Dawson, Andrew and Mallick, Rajib and Hernandez, Alvaro García and Dehdezi, Pejman Keikhaei (2014) Energy harvesting from pavements. In: Climate change, energy, sustainability and pavements. Green energy and technology . Springer, Heidelberg, pp. 481-517. ISBN 978-3-662-44718-5
Balfe, Nora and Sharples, Sarah and Wilson, John R. (2014) Impact of automation: measurement of performance, workload and behaviour in a complex control environment. Applied Ergonomics, 47 . pp. 52-64. ISSN 0003-6870
Lemm, J.D. and Warmuth, A.R. and Pearson, S.R. and Shipway, P.H. (2014) The influence of surface hardness on the fretting wear of steel pairs: its role in debris retention in the contact. Tribology International, 81 . pp. 258-266. ISSN 1879-2464
Larkins, E.C. and Bull, S. and Kaunga-Nyirenda, S. and Helal, M.A. and Vilokkinen, V. and Uusimaa, P. and Crump, P. and Erbert, G. (2014) Design optimisation of high-brightness laser diodes for external cavity operation in the BRIDLE project. In: 2014 International Semiconductor Laser Conference, 7-10 September 2014, Palma de Mallorca, Spain.
Fendi, Karwan Ghazi and Adam, Sarhat Mustafa and Kokkas, Nikolaos and Smith, Martin John (2014) An approach to produce a GIS database for road surface monitoring. In: 2nd International Conference on Civil Engineering (ICCEN 2013), 13-14 Dec 2013, Stockholm, Sweden.
Sabatini, Roberto and Moore, Terry and Hill, Chris (2014) Avionics-based GNSS integrity augmentation for unmanned aerial systems sense-and-avoid. In: 27th International Technical Meeting of The Satellite Division of the Institute of Navigation (ION GNSS+ 2014), 8-12 Sept 2014, Tampa, Florida.
Jing, Hao and Pinchin, James and Hill, Chris and Moore, Terry (2014) Collaborative Wi-Fi fingerprint training for indoor positioning. In: 27th International Technical Meeting of The Satellite Division of the Institute of Navigation, 8-12 Sept 2014, Tampa, Florida.
Pinchin, James and Smith, Gavin and Hill, Chris and Moore, Terry and Loram, Ian (2014) The potential of electromyography to aid personal navigation. In: 27th International Technical Meeting of The Satellite Division of the Institute of Navigation (ION GNSS+ 2014), 8-12 Sept 2014, Tampa, Florida.
Kaunga-Nyirenda, S.N. and Dias, H.K. and Lim, J.J. and Bull, S. and Malaguti, S. and Bellanca, G. and Larkins, E.C. (2014) Design and simulation of high-speed nanophotonic electro-optic modulators. In: Numerical Simulation of Optoelectronic Devices, 2014, 1-4 September 2014, Palma de Mallorca.
Saidj, Faiza and Kibboua, Rachid and Azzi, Abdelwahid and Ababou, Noureddine and Azzopardi, Barry James (2014) Experimental investigation of air–water two-phase flow through vertical 90° bend. Experimental Thermal and Fluid Science, 57 . pp. 226-234. ISSN 0894-1777
Pourbafrani, Mohammad and McKechnie, Jon and Shen, Timothy and Saville, Bradley A. and MacLean, Heather L. (2014) Impacts of pre-treatment technologies and co-products on greenhouse gas emissions and energy use of lignocellulosic ethanol production. Journal of Cleaner Production, 78 . pp. 104-111. ISSN 1879-1786
Binner, Eleanor and Medeira-Munoyerro, Maria and Huddle, Thomas and Kingman, S.W. and Dodds, Chris and Dimitrakis, G. and Robinson, John P. and Lester, Edward (2014) Factors affecting the microwave coking of coals and the implications on microwave cavity design. Fuel Processing Technology, 125 . pp. 8-17. ISSN 0378-3820
Miller, James D. and Grebby, Stephen (2014) Mapping long-term temporal change in imperviousness using topographic maps. International Journal of Applied Earth Observation and Geoinformation, 30 . pp. 9-20. ISSN 0303-2434
Susi, Melania and Andreotti, Marcus and Aquino, Marcio (2014) Kalman filter based PLL robust against ionospheric scintillation. In: Mitigation of ionospheric threats to GNSS: an appraisal of the scientific and technological outputs of the TRANSMIT Project. InTech, pp. 23-36. ISBN 978-953-51-1642-4
Mbah, Afamefuna Maduka and Walker, John G. and Phillips, Andrew J. (2014) Performance evaluation of digital pulse position modulation for wavelength division multiplexing FSO systems impaired by interchannel crosstalk. IET Optoelectronics, 8 (6). pp. 245-255. ISSN 1751-8776
Miller, James D. and Kim, Hyeonjun and Kjeldsen, Thomas R. and Packman, John and Grebby, Stephen and Dearden, Rachel (2014) Assessing the impact of urbanization on storm runoff in a peri-urban catchment using historical change in impervious cover. Journal of Hydrology, 515 . pp. 59-70. ISSN 1879-2707
Basiri, Anahid and Amirian, Pouria and Winstanley, Adam and Moore, Terry and Hill, Chris (2014) Spatial uncertainty management in pedestrian navigation. In: Principle and application progress in location-based services. Lecture notes in geoinformation and cartography . Springer International Publishing, Cham, Swtizerland, pp. 343-355. ISBN 978-3-319-04028-8
Abdulrahim, Khairi and Seman, K. and Othman, M and Md Shuib, F. M. and Moore, Terry and Hide, Christopher and Hill, Chris (2014) On magnetometer heading updates for inertial pedestrian navigation system. Gyroscopy and Navigation, 5 (3). pp. 145-152. ISSN 2075-1087
Sumner, M. and Abusorrah, Abdullah and Thomas, David W. P. and Zanchetta, Pericle (2014) Real time parameter estimation for power quality control and intelligent protection of grid-connected power electronic converters. IEEE Transactions on Smart Grid, 5 (4). pp. 1602-1607. ISSN 1949-3061
Hazzard, Adrian and Benford, Steve and Burnett, Gary (2014) You’ll never walk alone: designing a location-based soundtrack. In: 14th International Conference on New Interfaces for Musical Expression, 30 June - 4 July 2014, London, UK.
Baydu, C. Al and Simmons, Kathy and Morvan, Herve P. (2014) Computational investigation of flows and pressure fields associated with spur gear meshing. In: ASME Turbo Expo 2014, 16-20 June 2014, Düsseldorf, Germany.
Basiri, Anahid and Lohan, Elena Simona and Figueiredo e Silva, Pedro and Peltola, Pekka and Hill, Chris and Moore, Terry (2014) Overview of positioning technologies from fitness-to-purpose point of view. In: International Conference on Localization and GNSS 2014 (ICL-GNSS 2014), 24-26 June 2014, Helsinki.
Koroma, S.G. and Hussein, M.F.M. and Owen, J.S. (2014) Vibration of a beam on continuous elastic foundation with nonhomogeneous stiffness and damping under a harmonically excited mass. Journal of Sound and Vibration, 333 (9). pp. 2571-2587. ISSN 0022-460X
Rhodes, James M. and Mason, Barry S. and Perrat, Bertrand and Smith, Martin and Goosey-Tolfrey, Victoria L. (2014) The validity and reliability of a novel indoor player tracking system for use within wheelchair court sports. Journal of Sports Sciences, 32 (17). pp. 1639-1647. ISSN 0264-0414
Grubb, Mark and Carpenter, James and Crowe, John A. and Teoh, Jeremy and Marlow, Neil and Ward, Carole and Mann, Chantelle and Sharkey, Don and Hayes-Gill, Barrie R. (2014) Forehead reflectance photoplethysmography to monitor heart rate: preliminary results from neonatal patients. Physiological Measurement, 35 (5). pp. 881-893. ISSN 0967-3334
Lo Presti, Davide and Fecarotti, Claudia and Clare, Adam T. and Airey, Gordon (2014) Toward more realistic viscosity measurements of tyre rubber–bitumen blends. Construction and Building Materials . ISSN 0950-0618 (In Press)
Schiavon, Stefano and Altomonte, Sergio (2014) Influence of factors unrelated to environmental quality on occupant satisfaction in LEED and non-LEED certified buildings. Building and Environment, 77 . pp. 148-159. ISSN 1873-684X
Prescott, Darren and Andrews, John D. (2014) Modelling the effects of asset management decisions on a railway track section. In: 2nd International Conference on Railway Technology: Research, Development and Maintenance, 8-11 April 2014, Ajaccio, Corsica, France.
Kaunga-Nyirenda, Simeon Newton and Bull, Stephen and Lim, Jun Jun and Hasler, Karl-Heinz and Fricke, Jörg and Larkins, Eric C. (2014) Factors influencing brightness and beam quality of conventional and distributed Bragg reflector tapered laser diodes in absence of self-heating. IET Optoelectronics, 8 (2). pp. 99-107. ISSN 1751-8768
Sreeja, V. and Aquino, M. and de Jong, Kees and Visser, Hans (2014) Effect of the 24 September 2011 solar radio burst on precise point positioning service. Space Weather, 12 (3). pp. 143-147. ISSN 1542-7390
Hargreaves, David Michael and Kakimpa, Bruce and Owen, John S. (2014) The computational fluid dynamics modelling of the autorotation of square, flat plates. Journal of Fluids and Structures, 46 . pp. 111-133. ISSN 1095-8622
Chronopoulos, D. and Ichchou, M. and Troclet, B. and Bareille, O. (2014) Computing the broadband vibroacoustic response of arbitrarily thick layered panels by a wave finite element approach. Applied Acoustics, 77 . pp. 89-98. ISSN 0003-682X
Lang, Alexandra. R. and Martin, Jennifer L. and Sharples, Sarah and Crowe, John A. (2014) Medical device design for adolescent adherence and developmental goals: a case study of a cystic fibrosis physiotherapy device. Patient Preference and Adherence, 2014 (8). pp. 301-309. ISSN 1177-889X
Abdulrahim, Khairi and Moore, Terry and Hide, Christopher and Hill, Chris (2014) Understanding the performance of zero velocity updates in MEMS-based pedestrian navigation. International Journal of Advancements in Technology, 5 (2). pp. 53-60. ISSN 0976-4860
Liu, Donglie and Shao, Yunfeng and Liu, Zhenguo and Riedel, Björn and Sowter, Andrew and Niemeier, Wolfgang and Bian, Zhengfu (2014) Evaluation of InSAR and TomoSAR for monitoring deformations caused by mining in a mountainous area with high resolution satellite-based SAR. Remote Sensing, 6 (2). pp. 1476-1495. ISSN 2072-4292
Munro, Richard J. and Foster, M. R. (2014) Stratified spin-up in a sliced, square cylinder. Physics of Fluids, 26 (2). 026603. ISSN 1070-6631
Liu, Ying and Dong, Haibo and Lohse, Niels and Petrovic, Sanja and Gindy, Nabil (2014) An investigation into minimising total energy consumption and total weighted tardiness in job shops. Journal of Cleaner Production, 65 . pp. 87-96. ISSN 0959-6526
Morris, David E. and Oakley, Jeremy E. and Crowe, John A. (2014) A web-based tool for eliciting probability distributions from experts. Environmental Modelling and Software, 52 . pp. 1-4. ISSN 1873-6726
La Rocca, Antonino and Liberto, G. Di. and Shayler, P.J. and Parmenter, C.D.J. and Fay, M.W. (2014) Application of nanoparticle tracking analysis platform for the measurement of soot-in-oil agglomerates from automotive engines. Tribology International, 70 . pp. 142-147. ISSN 0301-679X
Tang, Zhuoqi and Furniss, David and Fay, Michael and Neate, Nigel C. and Cheng, Yin and Barney, Emma and Sojka, Lukasz and Sujecki, Slawomir and Benson, Trevor M. and Seddon, Angela B. (2014) First identification of rare-earth oxide nucleation in chalcogenide glasses and implications for fabrication of mid-infrared active fibers. Journal of the American Ceramic Society, 97 (2). pp. 432-441. ISSN 0002-7820
Stephenson, Scott and Meng, Xiaolin and Moore, Terry and Baxendale, Anthony and Edwards, Tim (2014) A fairy tale approach to cooperative vehicle positioning. In: 2014 International Technical Meeting of The Institute of Navigation, 27-29 Jan 2014, San Diego, California.
Moore, Terry (2014) Ubiquitous positioning: a pipe dream or reality? In: ION International Technical Meeting 2014, 27-29 January 2014, San Diego, California, USA.
Binner, Eleanor and Robinson, John P. and Silvester, S.A. and Kingman, S.W. and Lester, Edward (2014) Investigation into the mechanisms by which microwave heating enhances separation of water-in-oil emulsions. Fuel, 116 . pp. 516-521. ISSN 1873-7153
Chronopoulos, Dimitrios and Ichchou, Mohamed and Troclet, Bernard and Bareille, Olivier (2014) Predicting the broadband response of a layered cone-cylinder-cone shell. Composite Structures, 107 . pp. 149-159. ISSN 02638223
Odbert, Henry M. and Grebby, Stephen (2014) A note on geographical systems and maps of Montserrat. Memoirs, 39 . pp. 489-494. ISSN 2041-4722
Binner, Eleanor and Lester, Edward and Kingman, S.W. and Dodds, Chris and Wu, Tao and Robinson, John P. and Wardle, Peter and Mathews, Jonathan P. (2014) A review of microwave coal processing. Journal of Microwave Power and Electromagnetic Energy, 48 (1). pp. 35-60. ISSN 0832-7823
Voisey, K.T. and Scotchford, C.A. and Martin, L. and Gill, H.S. (2014) Effect of Q-switched laser surface texturing of titanium on osteoblast cell response. Physics Procedia, 56 . pp. 1126-1135. ISSN 1875-3892
Li, C.L. and Murray, J.W. and Voisey, K.T. and Clare, A.T. and McCartney, D.G. (2014) Effect of prior laser microstructural refinement on the formation of amorphous layer in an Al86Co7.6Ce6.4 alloy. Applied Surface Science, 289 . pp. 230-236. ISSN 0169-4332
Chen, H and McCartney, D.G. and Voisey, K.T. (2014) Effect of surface conditions on internal oxidation and nitridation of HVOF MCrAlY coatings. Materials at High Temperatures . ISSN 0960-3409 (In Press)
Howard, Sam and Lang, Alexandra and Patel, Mitesh Dilipkumar Kantilal and Sharples, Sarah and Shaw, Dominick E. (2014) Electronic monitoring of adherence to inhaled medication in asthma. Current Respiratory Medicine Reviews, 10 (1). pp. 50-63. ISSN 1875-6387
Liu, Yawen and Apeagyei, Alex K. and Ahmad, Naveed and Grenfell, James and Airey, Gordon (2014) Examination of moisture sensitivity of aggregate–bitumen bonding strength using loose asphalt mixture and physico-chemical surface energy property tests. International Journal of Pavement Engineering, 15 (7). pp. 657-670. ISSN 1029-8436
Hashemzadeh, M. and Powell, J. and Voisey, K.T. (2014) Fibre laser piercing of mild steel: the effects of power intensity, gas type and pressure. Optics and Lasers in Engineering, 55 . pp. 143-149. ISSN 0143-8166
Abdulrahim, Khairi and Hide, Christopher and Moore, Terry and Hill, Chris (2014) Increased error observability of an inertial pedestrian navigation system by rotating IMU. Journal of Engineering and Technological Sciences, 46 (2). pp. 211-225. ISSN 2337-5779
Lo Presti, Davide and Khan, Rawid and Hassan, Norhidayah Abdul and Airey, Gordon and Collop, Andrew (2014) Laboratory mix design of asphalt mixture containing reclaimed material. Advances in Materials Science and Engineering, 2014 (507082). ISSN 1687-8434
Voisey, K.T. and Folkes, J. and Srithorn, J. and Hughes, D.J. (2014) Neutron strain scanning of fibre and diode laser welds in stainless steel and Ti6Al4V. Physics Procedia, 56 . pp. 1277-1285. ISSN 1875-3892
Abdulrahim, Khairi and Hide, Chris and Moore, Terry and Hill, Chris (2014) Rotating a mens inertial measurement unit for a foot-mounted pedestrian navigation. Journal of Computer Science, 10 (12). pp. 2619-2627. ISSN 1549-3636
Hashemzadeh, M. and Suder, W and Williams, S. and Powell, J. and Kaplan, A.F.H. and Voisey, K.T. (2014) The application of specific point energy analysis to laser cutting with 1 μm laser radiation. Physics Procedia, 56 . pp. 909-918. ISSN 1875-3892
Lo Presti, Davide (2013) Recycled tyre rubber modified bitumens for road asphalt mixtures: a literature review. Construction and Building Materials, 49 . pp. 863-881. ISSN 0950-0618
Thomson, Ross and Martin, Jennifer L. and Sharples, Sarah (2013) The psychosocial impact of home use medical devices on the lives of older people: a qualitative study. BMC Health Services Research, 13 (467). 467/1-467/8. ISSN 1472-6963
Langston, Paul and Ai, Jun and Yu, Hai-Sui (2013) Simple shear in 3D DEM polyhedral particles and in a simplified 2D continuum model. Granular Matter, 15 (5). pp. 595-606. ISSN 1434-5021
Crossley, Richard J. and Schubel, Peter J. and De Focatiis, Davide S.A. (2013) Time–temperature equivalence in the tack and dynamic stiffness of polymer prepreg and its application to automated composites manufacturing. Composites Part A: Applied Science and Manufacturing, 52 . pp. 126-133. ISSN 1359-835X
Chen, Cheng and McDowell, G.R. and Thom, N.H. (2013) A study of geogrid-reinforced ballast using laboratory pull-out tests and discrete element modelling. Geomechanics and Geoengineering, 8 (4). pp. 244-253. ISSN 1748-6025
Pearson, S.R. and Shipway, P.H. and Abere, J.O. and Hewitt, R.A.A. (2013) The effect of temperature on wear and friction of a high strength steel in fretting. Wear, 303 (1-2). pp. 622-631. ISSN 0043-1648
Bournas, Dionysios A. and Negro, Paolo and Taucer, Fabio F. (2013) Performance of industrial buildings during the Emilia earthquakes in Northern Italy and recommendations for their strengthening. Bulletin of Earthquake Engineering . ISSN 1570-761X
Gan, Guohui (2013) Dynamic thermal modelling of horizontal ground-source heat pumps. International Journal of Low-Carbon Technologies, 8 (2). pp. 95-105. ISSN 1748-1317
Binner, Eleanor and Robinson, John P. and Kingman, S.W. and Lester, Edward and Azzopardi, Barry J. and Dimitrakis, Georgios and Briggs, John (2013) Separation of oil/water emulsions in continuous flow using microwave heating. Energy and Fuels, 27 (6). pp. 3173-3178. ISSN 1520-5029
Melillo, Paolo and De Luca, Nicola and Bracale, Marcello and Pecchia, Leandro (2013) Classification tree for risk assessment in patients suffering from congestive heart failure via long-term heart rate variability. IEEE Journal of Biomedical and Health Informatics, 17 (3). pp. 727-733. ISSN 2168-2194
Murray, J.W. and Fay, M.W. and Kunieda, M. and Clare, A.T. (2013) TEM study on the electrical discharge machined surface of single-crystal silicon. Journal of Materials Processing Technology, 213 (5). pp. 801-809. ISSN 0924-0136
Cai, W. and McDowell, Glenn R. and Airey, G.D. (2013) Discrete element modelling of uniaxial constant strain rate tests on asphalt mixtures. Granular Matter, 15 (2). pp. 163-174. ISSN 1434-5021
Murray, J.W. and Kinnell, P.K. and Cannon, A.H and Bailey, B. and Clare, A.T. (2013) Surface finishing of intricate metal mould structures by large-area electron beam irradiation. Precision Engineering, 37 (2). pp. 443-450. ISSN 0141-6359
Fitzgerald, Elizabeth and Taylor, Claire and Craven, Michael P. (2013) To the Castle! A comparison of two audio guides to enable public discovery of historical events. Personal and Ubiquitous Computing, 17 (4). pp. 749-760. ISSN 1617-4909
Connor, Peter H. and Pickering, S.J. and Gerada, C. and Eastwick, Carol and Micallef, Christopher and Tighe, Chris (2013) Computational fluid dynamics modelling of an entire synchronous generator for improved thermal management. IET Electric Power Applications, 7 (3). pp. 231-236. ISSN 1751-8679
Yang, Li and Agyakwa, Pearl A. and Johnson, C. Mark (2013) Physics-of-failure lifetime prediction models for wire bond interconnects in power electronic modules. IEEE Transactions on Device and Materials Reliability, 13 (1). pp. 9-17. ISSN 1530-4388
Heath, Lindy and Zhu, Lifan and Thielemans, Wim (2013) Chitin nanowhisker aerogels. ChemSusChem, 6 (3). pp. 537-544. ISSN 1864-5631
Wan Mohtar, Wan Hanna Melini and Munro, Richard J. (2013) Threshold criteria for incipient sediment motion on an inclined bedform in the presence of oscillating-grid turbulence. Physics of Fluids, 25 (1). ISSN 1070-6631
Pecchia, Leandro and Martin, Jennifer L. and Ragozzino, Angela and Vanzanella, Carmela and Scognamiglio, Arturo and Mirarchi, Luciano and Morgan, Stephen P. (2013) User needs elicitation via analytic hierarchy process (AHP): a case study on a Computed Tomography (CT) scanner. BMC Medical Informatics and Decision Making, 13 (2). pp. 1-11. ISSN 1472-6947
Li, C.L. and Murray, J.W. and Voisey, K.T. and Clare, A.T. and McCartney, D.G. (2013) Amorphous layer formation in Al86.0Co7.6Ce6.4 glass-forming alloy by large-area electron beam irradiation. Applied Surface Science, 280 . pp. 431-438. ISSN 0169-4332
Chen, H. and Hyde, T.H. and Voisey, K.T. and McCartney, D.G. (2013) Application of small punch creep testing to a thermally sprayed CoNiCrAlY bond coat. Materials Science and Engineering: A, 585 . pp. 205-213. ISSN 0921-5093
Pecchia, Leandro and Craven, Michael P. (2013) Early stage health technology assessment (HTA) of biomedical devices: the MATCH experience. In: World Congress on Medical Physics and Biomedical Engineering, May 26-31 2012, Beijing, China. IFMBE proceedings (39). Springer, Berlin. ISBN 978-3-642-29304-7
Hu, Di and Xiao, Wei and Chen, George Zheng (2013) Near-net-shape production of hollow titanium alloy components via electrochemical reduction of metal oxide precursors in molten salts. Metallurgical and Materials Transactions B, 44 (2). pp. 272-282. ISSN 1073-5615
Challis, Richard and Ivchenko, Vladimir and Al-Lashi, Raied (2013) Ultrasonic attenuation measurements at very high SNR: Correlation, information theory and performance. Journal of Physics: Conference Series, 457 (012004). pp. 1-12. ISSN 1742-6588
Craven, Michael P. and Pecchia, Leandro and Martin, Jennifer L. (2013) User requirements for image-guided navigation in spinal surgery. In: World Congress on Medical Physics and Biomedical Engineering, May 26-31 2012, Beijing, China. IFMBE proceedings (39). Springer, Berlin. ISBN 978-3-642-29304-7
Zhang, Bei and Pechprasarn, Suejit and Somekh, Michael G. (2012) Surface plasmon microscopic sensing with beam profile modulation. Optics Express, 20 (27). pp. 28039-28048. ISSN 1094-4087
Foster, M.R. and Munro, Richard J. (2012) The linear spin-up of a stratified, rotating fluid in a square cylinder. Journal of Fluid Mechanics, 712 . pp. 7-40. ISSN 1469-7645
Sharples, Sarah and Martin, Jennifer L. and Lang, Alexandra and Craven, Michael P. and O'Neil, Sonja and Barnett, Julie (2012) Medical device design in context: a model of user–device interaction and consequences. Displays, 33 (4-5). pp. 221-232. ISSN 0141-9382
Grebby, Stephen and Cunningham, Dickson and Naden, Jonathan and Tansey, Kevin (2012) Application of airborne LiDAR data and airborne multispectral imagery to structural mapping of the upper section of the Troodos ophiolite, Cyprus. International Journal of Earth Sciences, 101 (6). pp. 1645-1660. ISSN 1437-3262
Patel, Rikesh and Achamfuo-Yeboah, Samuel and Light, Roger and Clark, Matt (2012) Ultrastable heterodyne interferometer system using a CMOS modulated light camera. Optics Express, 20 (16). pp. 17722-17733. ISSN 1094-4087
Zhang, Bei and Pechprasarn, Suejit and Zhang, Jing and Somekh, Michael G. (2012) Confocal surface plasmon microscopy with pupil function engineering. Optics Express, 20 (7). pp. 7388-7397. ISSN 1094-4087
Munro, Richard J. (2012) The interaction of a vortex ring with a sloped sediment layer: critical criteria for incipient grain motion. Physics of Fluids, 24 (2). 026604. ISSN 1089-7666
Bakare, M.S. and Voisey, K.T. and Chokethawai, K. and McCartney, D.G. (2012) Corrosion behaviour of crystalline and amorphous forms of the glass forming alloy Fe43Cr16Mo16C15B10. Journal of Alloys and Compounds, 527 . pp. 210-218. ISSN 0925-8388
Abdelatif, Amged O. and Owen, John S. and Hussein, Mohammed F.M. (2012) Modeling the re-anchoring of a ruptured tendon in bonded post-tensioned concrete. In: Bond in Concrete 2012 – General Aspects of Bond, 2012, Italy.
Abdelatif, Amged O. (2012) www.sudacon.net for construction news in Sudan. sudacon.
Patel, Rikesh and Achamfuo-Yeboah, Samuel and Light, Roger and Clark, Matt (2011) Widefield heterodyne interferometry using a custom CMOS modulated light camera. Optics Express, 19 (24). pp. 24546-24556. ISSN 1094-4087
Kamdi, Z. and Shipway, P.H. and Voisey, K.T. and Sturgeon, A.J. (2011) Abrasive wear behaviour of conventional and large-particle tungsten carbide-based cermet coatings as a function of abrasive size and type. Wear, 271 (9-10). pp. 1264-1272. ISSN 0043-1648
Niaz, Akbar and Boatwright, Adrian and Voisey, K.T. and Walsh, Darren A. (2011) Scanning electrochemical microscopy at thermal sprayed anti-corrosion coatings: effect of thermal spraying on heterogeneous electron transfer kinetics. Journal of Electroanalytical Chemistry, 657 (1-2). pp. 46-53. ISSN 1572-6657
Zeng, Xuesen and Long, A.C. and Clifford, M.J. and Probst-Schendzielorz, S. and Schmitt, M.W. (2011) Automated finite element modelling of 3D woven textiles. In: Third World Conference on 3D Fabrics and their Applications., 20-21 April 2011, Wuhan, China..
Money, Arthur G. and Barnett, Julie and Kuljis, Jasna and Craven, Michael P. and Martin, Jennifer L. and Young, Terry (2011) The role of the user within the medical device design and development process: medical device manufacturers' perspectives. BMC Medical Informatics and Decision Making, 11 (15). ISSN 1472-6947
Grebby, Stephen and Naden, Jonathan and Cunningham, Dickson and Tansey, Kevin (2011) Integrating airborne multispectral imagery and airborne LiDAR data for enhanced lithological mapping in vegetated terrain. Remote Sensing of Environment, 115 (1). pp. 214-226. ISSN 0034-4257
Melillo, Paolo and Fusco, Roberta and Sansone, Mario and Bracale, Marcello and Pecchia, Leandro (2011) Discrimination power of long-term heart rate variability measures for Chronic Heart Failure detection. Medical and Biological Engineering and Computing, 49 (1). pp. 67-74. ISSN 0140-0118
Pecchia, Leandro and Melillo, Paolo and Bracale, Marcello (2011) Discrimination power of short-term heart rate variability measures for CHF assessment. IEEE Transactions on Information Technology in Biomedicine, 15 (1). pp. 40-46. ISSN 1089-7771
Powell, J. and Al-Mashikhi, S.O. and Kaplan, A.F.H. and Voisey, K.T. (2011) Fibre laser cutting of thin section mild steel: an explanation of the 'striation free' effect. Optics and Lasers in Engineering, 49 (8). pp. 1069-1075. ISSN 0143-8166
Al-Mashikhi, S.O. and Powell, J. and Kaplan, A.F.H. and Voisey, K.T. (2011) Heat affected zones and oxidation marks in fiber laser-oxygen cutting of mild steel. Journal of Laser Applications, 23 (4). 042003-1-042003-7. ISSN 1042-346X
Saeidi, S and Voisey, K.T. and McCartney, D.G. (2011) Mechanical properties and microstructure of VPS and HVOF CoNiCrAlY coatings. Journal of Thermal Spray Technology, 20 (6). pp. 1231-1243. ISSN 1059-9630
Pecchia, Leandro and Melillo, Paolo and Marcello, Bracale (2011) Remote Health Monitoring of heart failure with data mining via CART method on HRV features. IEEE Transactions on Biomedical Engineering, 58 (3). pp. 800-804. ISSN 0018-9294
Pecchia, Leandro and Bath, Peter A. and Pendleton, Neil and Bracale, Marcello (2011) Use of the Analytic Hierarchy Process (AHP) for examining healthcare professionals’ assessments of the relative importance of risk factors for falls in community-dwelling older people. Methods of Information in Medicine, 50 (5). pp. 435-444. ISSN 0026-1270
Pecchia, Leandro and Bath, Peter A. and Pendleton, Neil and Bracale, Marcello (2010) Web-based system for assessing risk factors for falls in community-dwelling elderly people using the Analytic Hierarchy Process. Internationa Journal of the Analytic Hierarchy Process, 2 (2).
Pecchia, Leandro and Schiraldi, Fernando and Verde, Sossio and Mirante, Enrico and Bath, Peter A. and Bracale, Marcello (2010) Evaluation of short-term effectiveness of the disease management program “Di.Pro.Di.” on continuity of care of patients with congestive heart failure. Journal of the American Geriatrics Society, 58 (8). pp. 1603-1604. ISSN 0002-8614
Munro, Richard J. and Foster, M. R. and Davies, P. A. (2010) Instabilities in the spin-up of a rotating, stratified fluid. Physics of Fluids, 22 (5). ISSN 1070-6631
Worall, Mark (2010) Intelligent thermoregulation and homeostasis: lessons from nature. In: CIB World Congress 2010, 11-13 May 2010, Salford, UK.
Grebby, Stephen and Cunningham, Dickson and Naden, Jonathan and Tansey, Kevin (2010) Lithological mapping of the Troodos ophiolite, Cyprus, using airborne LiDAR topographic data. Remote Sensing of Environment, 114 (4). pp. 713-724. ISSN 1879-0704
Ahmed, N. and Bakare, M.S. and McCartney, D.G. and Voisey, K.T. (2010) The effects of microstructural features on the performance gap in corrosion resistance between bulk and HVOF sprayed Inconel 625. Surface and Coatings Technology, 204 (14). pp. 2294-2301. ISSN 0257-8972
Ahmed, N. and Voisey, K.T. and McCartney, D.G. (2010) Investigation into the effect of beam shape on melt pool characteristics using analytical modelling. Optics and Lasers in Engineering, 48 . pp. 548-554. ISSN 0143-8166
Bakare, M.S. and Voisey, K.T. and Roe, M.J. and McCartney, D.G. (2010) X-ray photoelectron spectroscopy study of the passive films formed on thermally sprayed and wrought Inconel 625. Applied Surface Science, 257 (3). pp. 786-794. ISSN 0169-4332
Munro, Richard J. and Bethke, N. and Dalziel, S. B. (2009) Sediment resuspension and erosion by vortex rings. Physics of Fluids, 21 (4). ISSN 1070-6631
Walsh, D.A. and Li, Lisa E. and Bakare, M.S. and Voisey, K.T. (2009) Visualisation of the local electrochemical activity of thermally-sprayed anti-corrosion coatings using scanning electrochemical microscopy. Electrochimica Acta, 54 (20). pp. 4647-4654. ISSN 0013-4686
Fay, Mike W. and Han, Y. and Novikov, Sergei V. and Edmonds, K.W. and Gallagher, B.L. and Campion, R.P. and Staddon, C.R. and Foxon, C.T. and Brown, Paul D. (2008) Nanoscale characterisation of MBE-grown GaMnN / (001) GaAs. In: Microscopy of semiconducting materials 2007: proceedings of the 15th conference, 2-5 April 2007, Cambridge, UK. Springer proceedings in physics (120). Springer-Verlag, Dordrecht, pp. 103-106. ISBN 9781402086144
Cunningham, Dickson and Gosar, Andrej and Kastelic, Vanja and Grebby, Stephen and Tansey, Kevin (2007) Multi-disciplinary investigations of active faults in the Julian Alps, Slovenia. Acta Geodynamica et Geomaterialia, 4 (1). pp. 77-85. ISSN 1214-9705
Wang, Y. and Simmons, K. and Eastwick, Carol and Hibberd, S. (2006) Study of aero-engine oil-air separators. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 220 (7). pp. 707-717. ISSN 0957-6509
Craven, Michael P. (2006) Routes and requirements for realizing pervasive medical devices. In: Pervasive computing in healthcare. CRC Press (Taylor & Francis Group), Boca Raton, Fla; London. ISBN 084933621X.
Cunningham, Dickson and Grebby, Stephen and Tansey, Kevin and Gosar, Andrej and Kastelic, Vanja (2006) Application of airborne LiDAR to mapping seismogenic faults in forested mountainous terrain, southeastern Alps, Slovenia. Geophysical Research Letters, 30 (20). L20308. ISSN 0094-8276
Voisey, K.T. and Liu, Z. and Stott, F.H. (2006) Inhibition of metal dusting using thermal spray coatings and laser treatment. Surface and Coatings Technology, 201 (3-4). pp. 637-648. ISSN 0257-8972
Munro, Richard J. and Davies, P.A. (2006) The flow generated in a continuously stratified rotating fluid by the differential rotation of a plane horizontal disc. Fluid Dynamics Research, 38 (8). pp. 522-538. ISSN 1873-7005
Houlston, Paul Robert (2006) Extracting Second Order System Matrices from State Space System. pp. 1147-1149.
Voisey, K.T. and Liu, Z. and Stott, F.H. (2006) Inhibition of metal dusting of alloy 800H by laser surface melting. Applied Surface Science, 252 (10). pp. 3658-3666. ISSN 0169-4332
Craven, Michael P. and Davey, Shirley M. and Martin, Jennifer L. (2005) Factors influencing wider acceptance of Computer Assisted Orthopaedic Surgery (CAOS) technologies for Total Joint Arthroplasty. Working Paper: MATCH_CAOS_Review_December2005_Craven_MP. Multidisciplinary Assessment of Technology Centre for Healthcare (MATCH). (Unpublished)
Munro, Richard J. and Dalziel, Stuart B. (2005) Attenuation technique for measuring sediment displacement levels. Experiments in Fluids, 39 (3). pp. 602-613. ISSN 0723-4864
Martin, Jennifer L. and Craven, Michael P. and Norris, Beverley J. (2005) MATCH: a new industry-focused approach to medical device development. In: Healthcare systems ergonomics and patient safety: human factor, a bridge between care and cure : proceedings of the International Conference HEPS 2005, Florence, Italy, 30th March-2nd April 2005. Taylor & Francis, Leiden, London, pp. 294-297. ISBN 0415375568
Munro, Richard J. and Dalziel, Stuart B. and Jehan, H. (2004) A pattern matching technique for measuring sediment displacement levels. Experiments in Fluids, 37 (3). pp. 399-408. ISSN 0723-4864
Craven, Michael P. (2004) The MATCH project: collaboration between academia and industry. Focus Magazine . pp. 15-16.
Craven, Michael P. and Curtis, K. Mervyn (2004) GesRec3D: a real-time coded gesture-to-speech system with automatic segmentation and recognition thresholding using dissimilarity measures. In: Gesture-based communication in human-computer interaction: 5th International Gesture Workshop, GW 2003: Genova, Italy, April 2003: selected revised papers. Lecture notes in computer science (2915). Springer, Berlin, pp. 231-238. ISBN 978-3-540-21072-6
Craven, Michael P. and Martin, Jennifer L. (2004) How does the healthcare industry involve users in medical device development? Pointers for UbiHealth. In: UbiHealth 2004: 3rd International Workshop on Ubiquitous Computing for Pervasive Healthcare Applications, 7-10 September 2004, Nottingham, UK.
Craven, Michael P. (1997) A faster learning neural network classifier using selective backpropagation. In: Fourth IEEE International Conference on Electronics, Circuits and Systems, 15-18 December 1997, Cairo, Egypt.
Wang, Xiaolong and Maroto-Valer, Mercedes Dissolution kinetics of minerals for advanced mineral carbonation. In: 7th European Conference on Coal Research & its Application, 3-5 Sept 2008, Cardiff, UK. (Unpublished)
Wang, Xiaolong and Maroto-Valer, Mercedes Ex-situ mineral carbonation with regenerative ammonium salts. In: 8th Annual Conference on Carbon Capture and Sequestration, 4-7 May 2009, Pittsburgh, U.S,. (Unpublished)