Items where Division is "University of Nottingham, UK > Faculty of Engineering > Department of Mechanical, Materials and Manufacturing Engineering"
Number of items at this level: 430. AAdeniyi, Akinola A. and Morvan, Herve and Simmons, Kathy (2017) A computational fluid dynamics simulation of oil-air flow between the cage and inner race of an aero-engine bearing. Journal of Engineering for Gas Turbines and Power, 139 (1). ISSN 1528-8919 Adeniyi, Akinola A. and Morvan, Hervé P. and Simmons, Kathy A. (2017) A coupled Euler-Lagrange CFD modelling of droplets-to-film. Aeronautical Journal, 121 (1246). pp. 1897-1918. ISSN 2059-6464 Agunlejika, Ezekiel O. and Langston, Paul and Azzopardi, Barry J. and Hewakandamby, Buddhika N. (2016) Flow instabilities in a horizontal thermosyphon reboiler loop. Experimental Thermal and Fluid Science, 78 . pp. 90-99. ISSN 0894-1777 Ahmed, Ifty and Shahruddin, Sharifah and Sharmin, Nusrat and Furniss, David and Rudd, Chris D. (2015) Core/clad phosphate glass fibres containing iron and/or titanium. Biomedical Glasses, 1 (1). pp. 20-30. ISSN 2299-3932 Ai, Jun and Langston, Paul A. and Yu, Hai-Sui (2014) Discrete element modelling of material non-coaxiality in simple shear flows. International Journal for Numerical and Analytical Methods in Geomechanics, 38 (6). pp. 615-635. ISSN 0363-9061 Ai, S. and Lu, B. and Chen, J. and Long, H. and Ou, Hengan (2017) Evaluation of deformation stability and fracture mechanism in incremental sheet forming. International Journal of Mechanical Sciences, 124-125 . pp. 174-184. ISSN 0020-7403 Al Owaisi, S.S. and Becker, Adib A. and Sun, Wei (2016) Analysis of shape and location effects of closely spaced metal loss defects in pressurised pipes. Engineering Failure Analysis, 68 . pp. 172-186. ISSN 1350-6307 Alblahaihid, Khalid and Kinnell, Peter and Lawes, Simon and Desgaches, Dorian and Leach, Richard K. (2016) Performance assessment of a new variable stiffness probing system for micro-CMMs. Sensors, 16 (4). 492/1-492/18. ISSN 1424-8220 Alburayt, Anas and Syam, Wahyudin P. and Leach, Richard (2017) Detecting the signature of motion stage non-linearity for focus variation microscopy using measurement noise and surface topography repeatability. In: 16th Conference on Metrology and Properties of Engineering Surfaces, 27-29 June 2017, Goteborg, Sweden. Aldwell, Barry and Yin, Shuo and McDonnell, Kevin A. and Trimble, Daniel and Hussain, Tanvir and Lupoi, Rocco (2016) A novel method for metal–diamond composite coating deposition with cold spray and formation mechanism. Scripta Materialia, 115 . pp. 10-13. ISSN 1359-6462 Algodi, Samer J. and Clare, Adam T. and Brown, Paul D. (2018) Modelling of single spark interactions during electrical discharge coating. Journal of Materials Processing Technology, 252 . pp. 760-772. ISSN 0924-0136 Algodi, Samer J. and Murray, James W. and Brown, Paul D. and Clare, Adam T. (2018) Wear performance of TiC/Fe cermet electrical discharge coatings. Wear, 402-403 . pp. 109-123. ISSN 0043-1648 Anstead, Edward and Benford, Steve and Houghton, Robert (2016) MarathOn Multiscreen: group television watching and interaction in a viewing ecology. In: 19th ACM Conference on Computer-Supported Cooperative Work and Social Computing, 27 Feb – 2 Mar 2016, San Francisco, USA. Antoniadis, I. and Chronopoulos, Dimitrios and Spitas, V. and Koulocheris, D. (2015) Hyper-damping properties of a stiff and stable linear oscillator with a negative stiffness element. Journal of Sound and Vibration, 346 . pp. 37-52. ISSN 0022-460X Apalowo, R.K. and Ampatzidis, T. and Chronopoulos, D. and Ichchou, M. and Essa, Y. and De La Escalera, F.M. (2017) Prediction of temperature dependent wave dispersion and interaction properties in composite structures. In: 24th International Congress on Sound and Vibration, 23-27 July 2017, London, UK. Apalowo, R.K. and Chronopoulos, D. and Ichchou, M. and Essa, Y. and Martin De La Escalera, F. (2017) The impact of temperature on wave interaction with damage in composite structures. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 231 (16). pp. 3042-3056. ISSN 0954-4062 Apalowo, R.K. and Chronopoulos, D. and Tanner, G. (2018) Wave interaction with defects in pressurised composite structures. Journal of Nondestructive Evaluation, 37 . 48/1-48/19. ISSN 1573-4862 Apalowo, R.K. and Chronopoulos, D. and Thierry, V. (2017) Thermal effect on wave interaction in composite structures. In: : 19th International Conference on Aerospace, Mechanical, Automotive and Materials Engineering, 19-20 January 2017, London, UK. Apalowo, R.K. and Chronopoulos, D. and Thierry, V. (2017) Wave interaction with defects in pressurized composite structures. In: 19th International Conference on Aerospace, Mechanical, Automotive and Materials Engineering, 19-20 January 2017, London, UK. Argyle, Elizabeth M. and Houghton, Robert J. and Atkin, Jason and de Maere, Geert and Moore, Terry and Morvan, Herve (2018) Human performance and strategies while solving an aircraft routing and sequencing problem: an experimental approach. Cognition, Technology and Work . ISSN 1435-5566 Arshad, Adeel and Ali, Hafiz Muhammad and Jabbal, Mark and Verdin, P.G. (2017) Thermal management of electronics devices with PCMs filled pin-fin heat sinks: a comparison. International Journal of Heat and Mass Transfer, 117 . pp. 1199-1204. ISSN 0017-9310 Arshad, Adeel and Ali, Hafiz Muhammad and Khushnood, Shahab and Jabbal, Mark (2017) Experimental investigation of PCM based round pin-fin heat sinks for thermal management of electronics: effect of pin-fin diameter. International Journal of Heat and Mass Transfer, 117 . pp. 861-872. ISSN 0017-9310 Athanasiou, Giorgos S. and Ernst, Johanna and Furniss, David and Benson, Trevor M. and Chauhan, Jasbinder and Middleton, John and Parmenter, Christopher D.J. and Fay, Mike W. and Neate, Nigel C. and Shiryaev, Vladimir and Churbanov, Mikhail F. and Seddon, Angela B. (2016) Toward mid-infrared, subdiffraction, spectral-mapping of human cells and tissue: SNIM (scanning near-field infrared microscopy) tip fabrication. Journal of Lightwave Technology, 34 (4). 1212 -1219. ISSN 1558-2213 Axinte, Dragos A. and Billingham, John and Guillerna, A. Bilbao (2017) New models for energy beam machining enable accurate generation of freeforms. Science Advances, 3 (9). e1701201/1-e1701201/7. ISSN 2375-2548 BBai, Mingwen and Kazi, H. and Zhang, X. and Liu, J. and Hussain, Tanvir (2018) Robust hydrophobic surfaces from suspension HVOF thermal sprayed rare-earth oxide ceramics coatings. Nature, 8 . 6973/1-6973/8. ISSN 1476-4687 Bailey, N.Y. and Hibberd, Stephen and Power, H. (2017) Dynamics of a small gap gas lubricated bearing with Navier slip boundary conditions. Journal of Fluid Mechanics, 818 . pp. 68-99. ISSN 1469-7645 Bakker, Otto Jan and Chaplin, Jack C. and de Silva, Lavindra and Felli, Paolo and Sanderson, David and Logan, Brian and Ratchev, Svetan (2017) Toward process control from formal models of transformable manufacturing systems. Procedia CIRP . ISSN 2212-8271 (In Press) Bakker, Otto Jan and Gibson, C, and Wilson, Peter and Lohse, Niels and Popov, Atanas A. (2015) Linear friction weld process monitoring of fixture cassette deformations using empirical mode decomposition. Mechanical Systems and Signal Processing, 62-63 . pp. 395-514. ISSN 1096-1216 Bakker, Otto Jan and Papastathis, Thomas and Popov, Atanas A. and Ratchev, Svetan (2013) Active fixturing: literature review and future research directions. International Journal of Production Research, 51 (11). pp. 3171-3190. ISSN 0020-7543 Bakker, Otto Jan and Papastathis, Thomas and Ratchev, Svetan and Popov, Atanas A. (2013) Recent research on flexible fixtures for manufacturing processes. Recent Patents on Mechanical Engineering, 6 (2). pp. 107-121. ISSN 1874-477X Bakker, Otto Jan and Popov, Alexander A. and Ratchev, Svetan (2017) Variation analysis of automated wing box assembly. Procedia CIRP . ISSN 2212-8271 (In Press) Balhassn, S.M. Ali and Hyde, T.H. and Sun, Wei (2016) Small two-bar specimen creep testing of Grade P91 steel at 650oC. High Temperature Materials and Processes, 35 (3). pp. 243-252. ISSN 2191-0324 Barney, Emma R. and Tang, Zhuoqi and Seddon, Angela and Furniss, David and Sujecki, S. and Benson, Trevor M. and Neate, Nigel and Gianolio, Diego (2014) The local environment of Dy3+in selenium-rich chalcogenide glasses. RSC Advances, 4 (80). pp. 42364-42371. ISSN 2046-2069 Barrera Betanzos, Fernando and Gimeno-Fabra, Miquel and Segal, Joel and Grant, David and Ahmed, Ifty (2016) Cyclic pressure on compression-moulded bioresorbable phosphate glass fibre reinforced composites. Materials & Design, 100 . pp. 141-150. ISSN 0261-3069 Barrett, R.A. and Farragher, T.P. and Hyde, Christopher J. and O'Dowd, N.P. and O'Donoghue, P.E. and Leen, S.B. (2014) A unified viscoplastic model for high temperature low cycle fatigue of service-aged P91 steel. Journal of Pressure Vessel Technology, 136 (2). 021402/1-021402/8. ISSN 1528-8978 Baumers, Martin and Dickens, Phill and Tuck, Christopher and Hague, Richard (2016) The cost of additive manufacturing: machine productivity, economies of scale and technology-push. Technological Forecasting and Social Change, 102 . pp. 193-201. ISSN 0040-1625 Baumers, Martin and Tuck, Christopher and Wildman, Ricky D. and Ashcroft, Ian and Hague, Richard J.M. (2016) Shape complexity and process energy consumption in electron beam melting: a case of something for nothing in additive manufacturing? Journal of Industrial Ecology . ISSN 1530-9290 Bech, Alexander and Shayler, Paul J. and McGhee, Michael (2016) The effects of cylinder deactivation on the thermal behaviour and performance of a three cylinder spark ignition engine. SAE International Journal of Engines, 9 (4). ISSN 1946-3944 Behera, Amar Kumar and Lu, Bin and Ou, Hengan (2016) Characterization of shape and dimensional accuracy of incrementally formed titanium sheet parts with intermediate curvatures between two feature types. International Journal of Advanced Manufacturing Technology, 83 (5). pp. 1099-1111. ISSN 1433-3015 Behera, Amar Kumar and Lu, Bin and Ou, Hengan (2015) Characterization of shape and dimensional accuracy of incrementally formed titanium sheet parts. In: 4th International Conference on New Forming Technology (ICNFT 2015), 6-9 August 2015, Glasgow, UK. Behera, Amar Kumar and Ou, Hengan (2016) Effect of stress relieving heat treatment on surface topography and dimensional accuracy of incrementally formed grade 1 titanium sheet parts. International Journal of Advanced Manufacturing Technology, 87 (9). pp. 3233-3248. ISSN 1433-3015 Benaarbia, Adil and Rae, Y. and Sun, Wei (2018) Unified viscoplasticity modelling and its application to fatigue-creep behaviour of gas turbine rotor. International Journal of Mechanical Sciences, 136 . pp. 36-49. ISSN 0020-7403 Benaarbia, Adil and Rouse, James Paul and Sun, Wei (2018) A thermodynamically-based viscoelastic-viscoplastic model for the high temperature cyclic behaviour of 9-12% Cr steels. International Journal of Plasticity, 107 . pp. 100-121. ISSN 0749-6419 Benaarbia, Adil and Xu, Xu and Sun, Wei and Becker, Adib and Jepson, Mark (2018) Investigation of short-term creep deformation mechanisms in MarBN steel at elevated temperatures. Materials Science and Engineering: A, 734 . pp. 491-505. ISSN 0921-5093 Benardos, Panorios and Vosniakos, George-Christopher (2017) Internet of things and industrial applications for precision machining. In: 9th International Congress on Precision Maching, 6-9 September 2017, Athens, Greece. Benardos, Panorios and Vosniakos, George-Christopher (2017) Removed material volume calculations in CNC milling by exploiting CAD functionality. International Journal of Computer Aided Engineering and Technology . ISSN 1757-2665 (In Press) Bennett, Chris (2015) Finite element modelling of the inertia friction welding of a CrMoV alloy steel including the effects of solid-state phase transformations. Journal of Manufacturing Processes, 18 . pp. 84-91. ISSN 1878-6642 Bennett, Chris and Sun, Wei (2014) Optimisation of material properties for the modelling of large deformation manufacturing processes using a finite element model of the Gleeble compression test. Journal of Strain Analysis for Engineering Design, 49 (6). pp. 429-436. ISSN 2041-3130 Bersch, Kevin and Connor, Peter H. and Eastwick, Carol N. and Galea, Michael and Rolston, Rob (2017) CFD optimisation of the thermal design for a vented electrical machine. In: 2017 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD), 20-21 April, Nottingham, United Kingdom. Berthold, Martin and Morvan, Herve and Young, Colin and Jefferson-Loveday, Richard J. (2018) Towards investigation of external oil flow from a journal bearing in an epicyclic gearbox. Journal of Engineering for Gas Turbines and Power, 140 (6). 062501/1-062501/9. ISSN 1528-8919 Bhowmick, Kaustav and Furniss, David and Morvan, Herve and Seddon, Angela B. and Benson, Trevor M. (2016) Predictive, miniature co-extrusion of multilayered glass fiber-optic preforms. Journal of the American Ceramic Society, 99 (1). pp. 106-114. ISSN 1551-2916 Bilbao Guillerna, A. and Axinte, Dragos A. and Billingham, John and Cadot, G.B.J. (2017) Waterjet and laser etching: the nonlinear inverse problem. Royal Society Open Science, 4 (161031). ISSN 2054-5703 Bitar, Isam and Aboulkhair, Nesma and Leach, Richard (2017) The application of composite through-thickness assessment to additively manufactured structures. In: 28th Annual International Solid Freeform Fabrication Symposium, 7-9 August 2017, Austin, Texas, USA. (Submitted) Borsci, Simone and Lawson, Glyn and Broome, Simon (2015) Empirical evidence, evaluation criteria and challenges for the effectiveness of virtual and mixed reality tools for training operators of car service maintenance. Computers in Industry, 67 . pp. 17-26. ISSN 0166-3615 Borsci, Simone and Lawson, Glyn and Jha, Bhavna and Burgess, Mark and Salanitri, Davide (2016) Effectiveness of a multi-device 3D virtual environment application to train car service maintenance procedures. Virtual Reality, 2016 (20). pp. 41-55. ISSN 1359-4338 Brackett, D. and Ashcroft, I. and Wildman, R.D. and Hague, Richard J.M. (2014) An error diffusion based method to generate functionally graded cellular structures. Computers & Structures, 138 . pp. 102-111. ISSN 0045-7949 Brett, S.J. and Dyson, C.N.C. and Purdy, D. and Shingledecker, J. and Rantala, J. and Eaton-Mckay, J. and Sun, Wei (2018) Impression creep test of a P91 steel: a round robin programme. Materials at High Temperatures, 35 (1). pp. 529-534. ISSN 1878-6413 Broglia, R. and Choi, K.-S. and Houston, Paul and Pasquale, L. and Zanchetta, Pericle (2018) Output feedback control of flow separation over an aerofoil using plasma actuators. International Journal of Numerical Analysis and Modeling, 15 (6). pp. 864-883. ISSN 1705-5105 Brown, Louise P. and Yan, Shibo and Zeng, Xuesen and Long, Andrew C. (2015) Mesoscale geometric modelling of bifurcation in 3D woven T-beam preforms. In: 12th International Conference on Textile Composites, 26-29 May 2015, Raleigh, NC, USA.. Brown, Louise P. and Zeng, Xuesen and Long, Andrew C. and Brooks, Richard and Jones, I. Arthur (2013) Predicting the coefficient of thermal expansion for textile composites based on a unit cell approach. In: Texcomp-11 Conference, 16-20 September 2013, Leuven, Belgium. Brown, Louise P. and Zeng, Xuesen and Long, Andrew.C. and Jones, I. Arthur (2013) Recent developments in the realistic geometric modelling of textile structures using TexGen. In: 1st International Conference on Digital Technologies for the Textile Industries, 5-6 Sept 2013, Manchester, UK. Brown, Michael and Sharples, Sarah and Harding, Jenny (2013) Introducing PEGI: a usability process for the practical evaluation of Geographic Information. International Journal of Human-Computer Studies, 71 (6). pp. 668-678. ISSN 1071-5819 Brown, Michael and Sharples, Sarah and Harding, Jenny and Parker, C.J. and Bearman, N. and Maguire, M. and Forrest, D. and Haklay, M. and Jackson, M. (2013) Usability of Geographic Information: current challenges and future directions. Applied Ergonomics, 44 (6). pp. 855-865. ISSN 0003-6870 Burn, D.T. and Harper, Lee Thomas and Johnson, M. and Warrior, N.A. and Nagel, U. and Yang, L. and Thomason, J. (2016) The usability of recycled carbon fibres in short fibre thermoplastics: interfacial properties. Journal of Materials Science . ISSN 1573-4803 Buss, T.M. and Hyde, Christopher J. (2015) Cyclic thermomechanical testing of 316 stainless steel. Materials at High Temperatures, 32 (3). pp. 276-279. ISSN 1878-6413 CCacciapuoti, B. and Sun, Wei and McCartney, D.G. (2016) A study on the evolution of the contact angle of small punch creep test of Ductile materials. International Journal of Pressure Vessels and Piping . ISSN 0308-0161 Cacciapuoti, B. and Sun, Wei and McCartney, D.G. and Morris, A. and Lockyer, S. and Ab Razak, N. and Davies, C.M. and Hulance, J. (2017) An evaluation of the capability of data conversion of impression creep test. Materials at High Temperatures, 34 (5-6). ISSN 1878-6413 Cacciapuoti, Bianca and Morris, A. and Sun, Wei and McCartney, D.G. and Hulance, J. (2018) Correlation and capability of using site inspection data and small specimen creep testing for a service-exposed CrMoV pipe section. Materials at High Temperatures . ISSN 1878-6413 (In Press) Cadot, G.B.J. and Axinte, Dragos A. and Billingham, John (2016) Continuous trench, pulsed laser ablation for micro-machining applications. International Journal of Machine Tools & Manufacture, 107 . pp. 8-20. ISSN 0890-6955 Cadot, G.B.J. and Billingham, John and Axinte, Dragos A. (2017) A study of surface swelling caused by graphitisation during pulsed laser ablation of carbon allotrope with high content of sp ³ bounds. Journal of Physics D: Applied Physics, 50 (24). p. 245301. ISSN 1361-6463 Cao, Tingting and Lu, Bin and Ou, Hengan and Long, Hui and Chen, Jun (2016) Investigation on a new hole-flanging approach by incremental sheet forming through a featured tool. International Journal of Machine Tools & Manufacture, 110 . pp. 1-17. ISSN 0890-6955 Cappelletti, Chantal and Battistini, Simone and Graziani, Filippo (2018) Small launch platforms for micro-satellites. Advances in Space Research . ISSN 1879-1948 Cardenas, B. and Garvey, Seamus D. and Kantharaj, Bharath and Simpson, M.C. (2017) Gas-to-gas heat exchanger design for high performance thermal energy storage. Journal of Energy Storage, 14 (2). pp. 311-321. ISSN 2352-152X Chen, Changrong and Wang, Yan and Ou, Hengan and He, Yan and Tang, Xianzhi (2014) A review on remanufacture of dies and moulds. Journal of Cleaner Production, 64 . pp. 13-23. ISSN 1879-1786 Chen, Fei and Cui, Zhenshan and Ou, Hengan and Long, Hui (2016) Mesoscale modeling and simulation of microstructure evolution during dynamic recrystallization of a Ni-based superalloy. Applied Physics A, 122 (10). p. 890. ISSN 1432-0630 Chen, Fei and Gatea, Shakir and Ou, Hengan and Lu, Bin and Long, Hu (2016) Fracture characteristics of PEEK at various stress triaxialities. Journal of the Mechanical Behavior of Biomedical Materials, 64 . pp. 173-186. ISSN 1751-6161 Chen, Fei and Liu, Juan and Ou, Hengan and Lu, Bin and Cui, Zhenshan and Long, Hui (2015) Flow characteristics and intrinsic workability of IN718 superalloy. Materials Science and Engineering: A, 642 . pp. 279-287. ISSN 0921-5093 Chen, Fei and Ou, Hengan and Gatea, Shakir and Long, Hui (2017) Hot tensile fracture characteristics and constitutive modelling of polyether-ether-ketone (PEEK). Polymer Testing, 63 . pp. 168-179. ISSN 1873-2348 Chen, Fei and Ou, Hengan and Lu, Bin and Long, Hui (2016) A constitutive model of polyether-ether-ketone (PEEK). Journal of the Mechanical Behavior of Biomedical Materials, 53 . pp. 427-433. ISSN 1878-0180 Chen, H. and Rushworth, Adam and Sun, Wei and He, J. and Guo, H. (2018) Some considerations in using the small punch testing for thermally sprayed CoNiCrAlY coatings. Surface and Coatings Technology, 357 . pp. 684-690. ISSN 1879-3347 Chen, Hao and Jackson, G.A. and Sun, Wei (2017) An overview of using small punch testing for mechanical characterization of MCrAlY bond coats. Journal of Thermal Spray Technology, 26 (6). pp. 1222-1238. ISSN 1544-1016 Chen, Menghao and Parsons, Andrew J. and Felfel, Reda M. and Rudd, Christopher D. and Irvine, Derek J. and Ahmed, Ifty (2016) In-situ polymerisation of fully bioresorbable polycaprolactone/phosphate glass fibre composites: in vitro degradation and mechanical properties. Journal of the Mechanical Behavior of Biomedical Materials, 59 . pp. 78-89. ISSN 1878-0180 Chen, S. and Endruweit, Andreas and Harper, L.T. and Warrior, N.A. (2015) Inter-ply stitching optimisation of highly drapeable multi-ply preforms. Composites Part A: Applied Science and Manufacturing, 71 . pp. 144-156. ISSN 1359-835X Chen, S. and Harper, L.T. and Endruweit, A. and Warrior, N.A. (2015) Formability optimisation of fabric preforms by controlling material draw-in through in-plane constraints. Composites Part A: Applied Science and Manufacturing, 76 . pp. 10-19. ISSN 1359-835X Chen, Sheng and Gong, Wei and Yan, Yuying (2018) Conjugate natural convection heat transfer in an open-ended square cavity partially filled with porous media. International Journal of Heat and Mass Transfer, 124 . pp. 368-380. ISSN 0017-9310 Chen, Sheng and Yang, Bo and Zheng, Chuguang (2017) A lattice Boltzmann model for heat transfer in porous media. International Journal of Heat and Mass Transfer, 111 . pp. 1019-1022. ISSN 0017-9310 Chen, X. and Ashcroft, I. and Wildman, Ricky D. and Tuck, Christopher (2015) An inverse method for determining the spatially resolved properties of viscoelastic–viscoplastic three-dimensional printed materials. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 471 (2183). 20150477/1-20150477/23. ISSN 1471-2946 Cheung, Chi Fai and Liu, Mingyu and Leach, Richard and Feng, Xiaobing and Zhao, Chenyang (2018) Hierarchical-information-based characterization of multiscale structured surfaces. CIRP Annals - Manufacturing Technology, 67 (1). pp. 539-542. ISSN 0007-8506 Choong, Gabriel Y. H. and Lew, Chun Y. and De Focatiis, Davide S.A. (2015) Role of processing history on the mechanical and electrical behavior of melt-compounded polycarbonate-multiwalled carbon nanotube nanocomposites. Journal of Applied Polymer Science, 132 (8). 42277/1-42277/11. ISSN 1097-4628 Choong, Gabriel Y.H. and De Focatiis, Davide S.A. and Hassell, David G. (2013) Viscoelastic melt rheology and time-temperature superposition of polycarbonate – multi-walled carbon nanotube nanocomposites. Rheologica Acta, 52 (8). pp. 801-814. ISSN 0035-4511 Chronopoulos, D. (2018) Delivering quality along with quantity: the challenge of teaching a large and heterogeneous engineering class. International Journal of Mechanical Engineering Education . 030641901876411. ISSN 0306-4190 Chronopoulos, Dimitrios and Antoniadis, I. and Collet, M. and Ichchou, M. (2015) Enhancement of wave damping within metamaterials having embedded negative stiffness inclusions. Wave Motion, 58 . pp. 165-179. ISSN 0165-2125 Cortellino, Francesco and Sun, Wei and Hyde, T.H. (2016) On the effects of friction modelling on small punch creep test responses: a numerical investigation. Journal of Strain Analysis for Engineering Design, 51 (7). pp. 493-506. ISSN 2041-3130 Cortellino, Francesco and Sun, Wei and Rouse, James Paul and Cacciapuoti, B. and Hyde, T.H. (2017) Experimental and numerical analysis of initial plasticity in P91 steel small punch creep samples. Experimental Mechanics, 57 (8). pp. 1193-1212. ISSN 1741-2765 Cossutta, Matteo and McKechnie, Jon and Pickering, Stephen J. (2017) Comparative LCA of different graphene production routes. Green Chemistry, 19 (24). pp. 5874-5884. ISSN 1463-9270 Coughlan, Tim and Brown, Michael and Lawson, Glyn and McAuley, Derek and Baurley, Sharon and Tsai, Allen and Koppe, Therese and Elliott, Meretta and Green, Stephen and Martin, Jennifer L. (2014) Living with the user: design drama for dementia care through responsive scripted experiences in the home. In: ACM UbiComp '14, 13-17 Sept 2014, Seattle. (In Press) Craddock Dyson, Charles and Sun, Wei and Hyde, Christopher J. and Brett, Steve J. and Hyde, Thomas H. (2016) Use of small specimen creep data in component life management: a review. Materials Science and Technology . ISSN 0267-0836 Crundall, Elizabeth and Large, David and Burnett, Gary (2016) A driving simulator study to explore the effects of text size on the visual demand of in-vehicle displays. Displays, 43 . pp. 23-29. ISSN 1872-7387 Curia, Silvio and De Focatiis, Davide S.A. and Howdle, Steven M. (2015) High-pressure rheological analysis of CO2-induced melting point depression and viscosity reduction of poly(ε-caprolactone). Polymer, 69 . pp. 17-24. ISSN 0032-3861 Cárdenas, B. and Pimm, Andrew James and Kantharaj, Bharath and Simpson, M.C. and Garvey, J.A. and Garvey, Seamus D. (2017) Lowering the cost of large-scale energy storage: high temperature adiabatic compressed air energy storage. Propulsion and Power Research, 6 (2). pp. 126-133. ISSN 2212-540X Cárdenas, Bruno and Garvey, Seamus and Kantharaj, Bharath and Simpson, Michael (2017) Parametric investigation of a non-constant cross sectional area air to air heat exchanger. Applied Thermal Engineering, 113 . pp. 278-289. ISSN 1873-5606 DDe Focatiis, Davide S.A. and Buckley, C. Paul (2012) A toolbox for parameter-free predictions of solid-state properties of monodisperse glassy polymers with frozen-in molecular orientation. Journal of Polymer Science Part B: Polymer Physics, 50 (24). pp. 1748-1756. ISSN 1099-0488 De Focatiis, Davide S.A. and Embery, John and Buckley, C.Paul (2010) Large deformations in oriented polymer glasses: experimental study and a new glass-melt constitutive model. Journal of Polymer Science Part B: Polymer Physics, 48 (13). pp. 1449-1463. ISSN 0887-6266 Dixon, James E. and Shah, Disheet A. and Rogers, Catherine and Hall, Stephen and Weston, Nicola and Parmenter, Christopher D. J. and McNally, Donal and Denning, Chris and Shakesheff, Kevin M. (2014) Combined hydrogels that switch human pluripotent stem cells from self-renewal to differentiation. Proceedings of the National Academy of Sciences, 111 (15). pp. 5580-5585. ISSN 1091-6490 Dong, Xin and Axinte, Dragos A. and Palmer, David and Cobos, S. and Raffles, M. and Rabani, Amir and Kell, J. (2016) Development of a slender continuum robotic system for on-wing inspection/repair of gas turbine engines. Robotics and Computer-Integrated Manufacturing, 44 . pp. 218-229. ISSN 1879-2537 D’Angelo, Giacomo and Elhussieny, Amal and Faisal, Marwa and Fahim, I.S. and Everitt, Nicola M. (2018) Mechanical behavior optimization of chitosan extracted from shrimp shells as a sustainable material for shopping bags. Journal of Functional Biomaterials, 9 (2). 37/1-37/10. ISSN 2079-4983 de Silva, Lavindra and Felli, Paolo and Chaplin, Jack C. and Logan, Brian and Sanderson, David and Ratchev, Svetan (2017) Synthesising industry-standard manufacturing process controllers. In: Sixteenth International Conference on Autonomous Agents and Multiagent Systems, 8-12 May, 2017, São Paulo, Brazil. de Silva, Lavindra and Felli, Paolo and Chaplin, Jack C. and Logan, Brian and Sanderson, David and Ratchev, Svetan (2016) Realisability of production recipes. In: 22nd European Conference in Artificial Intelligence (ECAI 2016), 29 Aug-2 Sept 2016, The Hague, Netherlands. de Silva, Lavindra and Felli, Paolo and Sanderson, David and Chaplin, Jack C. and Logan, Brian and Ratchev, Svetan (2019) Synthesising process controllers from formal models of transformable assembly systems. Robotics and Computer-Integrated Manufacturing . ISSN 1879-2537 (In Press) de Silva, Lavindra and Meneguzzi, Felipe and Logan, Brian (2018) An operational semantics for a fragment of PRS. In: 27th International Joint Conference on Artificial Intelligence (IJCAI) and the 23rd European Conference on Artificial Intelligence (ECAI), 13-19 July 2018, Stockholm, Sweden. EEames, Ian W. and Evans, Kieran and Pickering, Stephen (2016) A comparative study of open and closed heat-engines for small-scale CHP applications. Energies, 9 (3). p. 130. ISSN 1996-1073 Eastgate, Richard M. and Picinali, Lorenzo and Patel, Harshada and D'Cruz, Mirabelle (2016) 3D tune-in: 3D games for tuning and learning about hearing aids. Hearing Journal . ISSN 0745-7472 Edwards, H.K. and Fay, Mike W. and Bououdina, M. and Gregory, D.H. and Walker, G.S. and Brown, Paul D. (2004) Structural characterisation of carbon nanotubes in the presence of a Ni catalyst. In: Electron Microscopy and Analysis 2003: Proceedings of the Institute of Physics Electron Microscopy and Analysis Group Conference, University of Oxford, 3-5 September 2003. Institute of Physics conference series (179). Institute of Physics Publishing, Bristol, pp. 447-450. ISBN 0750309679 Endruweit, Andreas and Zeng, X. and Matveev, Mikhail Y. and Long, Andrew C. (2018) Effect of yarn cross-sectional shape on resin flow through inter-yarn gaps in textile reinforcements. Composites Part A: Applied Science and Manufacturing, 104 . pp. 139-150. ISSN 1359-835X Endruweit, Andreas and Zeng, Xuesen and Long, Andrew C. (2015) Effect of specimen history on structure and in-plane permeability of woven fabrics. Journal of Composite Materials, 49 (13). pp. 1563-1578. ISSN 0021-9983 Eren, Ayse L. and Burnett, Gary and Large, David R. and Harvey, Catherine (2018) Understanding the effects of peripheral vision and muscle memory on in-vehicle touchscreen interactions. IET Intelligent Transport Systems . ISSN 1751-9578 Evans, Joanna and Brown, Michael and Coughlan, Tim and Lawson, Glyn and Craven, Michael P. (2015) A systematic review of dementia focused assistive technology. Lecture Notes in Computer Science, 9170 . pp. 406-417. ISSN 0302-9743 Everitt, Nicola M and Aboulkhair, Nesma T. and Maskery, Ian and Tuck, Christopher and Ashcroft, Ian (2016) Nanoindentation shows uniform local mechanical properties across melt pools and layers produced by selective laser melting of AlSi10Mg alloy. Advanced Materials Letters, 7 (1). pp. 13-16. ISSN 0976-3961 Everton, Sarah K. and Dickens, Phill and Tuck, Christopher and Dutton, Ben (2017) Using laser ultrasound to detect sub-surface defects in metal laser powder bed fusion components. JOM: the Journal of The Minerals, Metals & Materials Society . ISSN 1543-1851 Everton, Sarah K. and Hirsch, Matthias and Stravroulakis, Petros and Leach, Richard K. and Clare, Adam T. (2016) Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing. Materials & Design, 95 . pp. 431-445. ISSN 0261-3069 FFahad, Muhammad and Gilbert, Marianne and Dickens, Phill (2017) Microscopy and FTIR investigations of the thermal gelation of methylcellulose in glycols. Polymer Science, Series A, 59 (1). pp. 88-97. ISSN 1555-6107 Fanicchia, F. and Axinte, D. and Kell, J. and McIntyre, R. and Brewster, G. and Norton, A.D. (2017) Combustion flame spray of CoNiCrAlY & YSZ coatings. Surface and Coatings Technology . ISSN 0257-8972 Farhan Khan, Muhammad and Brackett, David and Ashcroft, Ian and Tuck, Christopher and Wildman, Ricky D. (2016) A novel approach to design lesion-specific stents for minimum recoil. Journal of Medical Devices, 11 (1). 011001/1-011001/10. ISSN 1932-619X Farr, Richard and Arman, Hussam and Gindy, Nabil A framework to support multiple perspectives in eco-efficiency decisions. In: 5th International Conference on Responsive Manufacturing, 11–13 Jan 2010, Ningbo, China. Farr, Richard and Lohse, Niels (2011) Use of enterprise simulation to assess the impacts of remanufacturing operations. In: International Conference on Remanufacturing, ICoR, 27-29 July 2011, University of Strathclyde, Glasgow. Farragher, T.P. and Scully, S. and O'Dowd, N.P. and Hyde, Christopher J. and Leen, S.B. (2014) High temperature, low cycle fatigue characterization of P91 weld and heat affected zone material. Journal of Pressure Vessel Technology, 136 (2). 021403/1-021403/10. ISSN 1528-8978 Fay, Mike W. and Han, Y. and Novikov, Sergei V. and Edmonds, K.W. and Wang, K. and Gallagher, B.L. and Campion, R.P. and Foxon, C.T. and Brown, Paul D. (2005) Structural characterisation of spintronic GaMnAs and GaMnN heterostructures grown by molecular beam epitaxy. In: Microscopy of semiconducting materials: proceedings of the 14th conference: April 11-14, 2005, Oxford, UK. Springer proceedings in physics (107). Springer-Verlag, Berlin, pp. 143-146. ISBN 9783540319146 Fay, Mike W. and Harrison, Ian and Birbeck, J.C. and Hughes, B.T. and Uren, M.J. and Martin, T. and Brown, Paul D. (2001) Microstructural characterisation of TiAlTiAu and TiAlPdAu ohmic contacts to AlGaN/GaN. In: Electron microscopy and analysis 2001: proceedings of the Institute of Physics Electron Microscopy and Analysis Group Conference, University of Dundee, 5-7 September. Institute of Physics conference series (168). IOP Publishing Ltd, Bristol, pp. 497-500. ISBN 9780750308120 Fay, Mike W. and Moldovan, Grigore and Harrison, Ian and Balmer, R.S. and Soley, D.E.J. and Hilton, K.P. and Hughes, B.T. and Uren, M.J. and Martin, T. and Brown, Paul D. (2003) TEM studies of multilayer ohmic contacts to n-type AlGaN/GaN. In: Microscopy of semiconducting materials 2003: proceedings of the Institute of Physics conference, Cambridge University, 31 March - 3 April. Institute of Physics conference series (180). IOP Publishing Ltd, Bristol, pp. 483-486. ISBN 9780750309790 Felfel, Reda M. and Hossain, Kazi M. Zakir and Kabir, Sumaya F. and Yee, Soon L. and Ahmed, Ifty and Grant, David M. (2018) Flexible and transparent films produced from cellulose nanowhisker reinforced agarose. Carbohydrate Polymers, 194 . pp. 328-338. ISSN 1879-1344 Felli, Paolo and de Silva, Lavindra and Logan, Brian and Ratchev, Svetan (2018) Composite capabilities for cloud manufacturing (demonstration). In: International Conference on Autonomous Agents and Multiagent Systems (AAMAS 2018), 10-15 Jul 2018, Stockholm, Sweden. Felli, Paolo and de Silva, Lavindra and Logan, Brian and Ratchev, Svetan (2017) Process plan controllers for non-deterministic manufacturing systems. In: International Joint Conference on Artificial Intelligence (IJCAI), 19-25 August 2017, Melbourne, Australia. Feng, Xiaobing and Kinnell, Peter K. and Lawes, Simon (2016) Development of CO2 snow cleaning for in situ cleaning of µCMM stylus tips. Measurement Science and Technology, 28 (1). ISSN 1361-6501 Feng, Xiaobing and Lacorne, Cyril and Fernandes, Gustavo Q. and Lawes, Simon and Kinnell, Peter (2016) Contamination of µCMM stylus tips: on-machine inspection. In: 16th International Conference of the European Society for Precision Engineering and Nanotechnology, 30 May - 3 June 2016, Nottingham, UK. Feng, Xiaobing and Lawes, Simon and Kinnell, Peter K. (2015) The development of a snow cleaning system for micro-CMM stylus tips. In: 15th International Conference of the European Society for Precision Engineering and Nanotechnology, 1 - 5 June 2015, Leuven, Belgium. Feng, Xiaobing and Lawes, Simon and Kinnell, Peter K. (2015) Evaluation of the capabilities and damage risk of cleaning methods for micro-CMM stylus tips. In: 4M/ICOMM2015 Conference, 31st March – 2nd April 2015, Milan, Italy. Feng, Xiaobing and Pascal, Jonathan and Lawes, Simon (2017) A microscopy approach for in situ inspection of the μCMM stylus for contamination. Measurement Science and Technology, 28 (9). ISSN 1361-6501 Feng, Xiaobing and Quagliotti, Danilo and Maculotti, Giacomo and Syam, Wahyudin P. and Tosello, Guido and Hansen, Hans N. and Galetto, Maurizio and Leach, Richard (2017) Measurement noise of a point autofocus surface topography instrument. In: 16th Conference on Metrology and properties of Engineering Surfaces, 27-29 June 2017, Göteborg, Sweden. Fernandes Arruebarrena, Vanessa Auxiliadora and De Focatiis, Davide S.A. (2014) The role of deformation history on stress relaxation and stress memory of filled rubber. Polymer Testing, 40 . pp. 124-132. ISSN 1873-2348 France, L.A. and Scotchford, C.A. and Grant, D.M. and Rashidi, H. and Popov, A.A. and Sottile, V. (2014) Transient serum exposure regimes to support dual differentiation of human mesenchymal stem cells. Journal of Tissue Engineering and Regenerative Medicine, 8 (8). pp. 652-663. ISSN 1932-7005 GGatea, Shakir and Lu, Bin and Chen, Jun and Ou, Hengan and McCartney, Graham (2018) Investigation of the effect of forming parameters in incremental sheet forming using a micromechanics based damage model. International Journal of Material Forming . ISSN 1960-6214 Gatea, Shakir and Ou, Hengan and Lu, Bin and McCartney, Graham (2017) Modelling of ductile fracture in single point incremental forming using a modified GTN model. Engineering Fracture Mechanics, 186 . pp. 59-79. ISSN 0013-7944 Gatea, Shakir and Ou, Hengan and McCartney, Graham (2018) Deformation and fracture characteristics of Al6092/SiC/17.5p metal matrix composite sheets due to heat treatments. Materials Characterization, 142 . pp. 365-376. ISSN 1873-4189 Gatea, Shakir and Ou, Hengan and McCartney, Graham (2016) Review on the influence of process parameters in incremental sheet forming. International Journal of Advanced Manufacturing Technology, 87 (1). pp. 479-499. ISSN 1433-3015 Gatea, Shakir and Xu, Dongkai and Ou, Hengan and McCartney, Graham (2017) Evaluation of formability and fracture of pure titanium in incremental sheet forming. International Journal of Advanced Manufacturing Technology . pp. 1-17. ISSN 1433-3015 Ghosh, Sukhendu and Usha, Ranganathan and Govindarajan, Rama and Tammisola, Outi (2016) Inviscid instability of two-fluid free surface flow down an incline. Meccanica . ISSN 1572-9648 (In Press) Gkanas, Evangelos I. and Grant, David M. and Khzouz, Martin and Stuart, Alastair D. and Manickam, Kandavel and Walker, Gavin S. (2016) Efficient hydrogen storage in up-scale metal hydride tanks as possible metal hydride compression agents equipped with aluminium extended surfaces. International Journal of Hydrogen Energy, 41 (25). pp. 10795-10810. ISSN 0360-3199 Godage, Isuru S. and Medrano-Cerda, Gustavo A. and Branson, David T. and Guglielmino, Emanuele and Caldwell, Darwin G. (2016) Dynamics for variable length multisection continuum arms. International Journal of Robotics Research, 35 (6). pp. 695-722. ISSN 0278-3649 Golightly, David and Dadashi, Nastaran (2016) The characteristics of railway service disruption: implications for disruption management. Ergonomics . ISSN 1366-5847 Gomez, Carlos and Thompson, Adam and DiSciacca, Jack and Lawes, Simon and Leach, Richard (2017) Coherence scanning interferometry for additive manufacture. In: 16th Conference on Metrology and properties of Engineering Surfaces, 27-29 June 2017, Göteborg, Sweden. Gommer, Frank and Brown, Louise P. and Brooks, Richard (2015) Quantification of mesoscale variability and geometrical reconstruction of a textile. Journal of Composite Materials . ISSN 1530-793X Gommer, Frank and Brown, Louise P. and Wedgwood, Kyle C.A. (2015) Analytical method using gamma functions for determining areas of power elliptical shapes for use in geometrical textile models. Composites Part A: Applied Science and Manufacturing, 81 . pp. 222-224. ISSN 1359-835X Gommer, Frank and Endruweit, Andreas and Long, Andrew C. (2018) Influence of the micro-structure on saturated transverse flow in fibre arrays. Journal of Composite Materials, 51 (18). pp. 2463-2475. ISSN 1530-793X Gommer, Frank and Endruweit, Andreas and Long, Andrew C. (2014) Analysis of filament arrangements and generation of statistically equivalent composite micro-structures. Composites Science and Technology, 99 . pp. 45-51. ISSN 0266-3538 Gommer, Frank and Wedgwood, Kyle C.A. and Brown, Louise P. (2015) Stochastic reconstruction of filament paths in fibre bundles based on two-dimensional input data. Composites Part A: Applied Science and Manufacturing, 76 . pp. 262-271. ISSN 1359-835X Gong, Y.P. and Hyde, Christopher J. and Sun, W. and Hyde, T.H. (2010) Determination of material properties in the Chaboche unified viscoplasticity model. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 224 (1). pp. 19-29. ISSN 2041-3076 Gong, Y.P. and Hyde, Christopher J. and Sun, Wei and Hyde, T.H. (2009) Determination of material parameters in the chaboche unified viscoplasticty model. Applied Mechanics and Materials, 16-19 . pp. 955-959. ISSN 1662-7482 Guillerna, A. Bilbao and Axinte, Dragos A. and Billingham, John (2015) The linear inverse problem in energy beam processing with an application to abrasive waterjet machining. International Journal of Machine Tools & Manufacture, 99 . pp. 34-42. ISSN 0890-6955 HHaffner-Staton, Ephraim and La Rocca, Antonino and Fay, Mike W. (2018) Progress towards a methodology for high throughput 3D reconstruction of soot nanoparticles via electron tomography. Journal of Microscopy, 270 (3). pp. 272-289. ISSN 1365-2818 Han, Y. and Fay, Mike W. and Brown, Paul D. and Novikov, Sergei V. and Edmonds, K.W. and Gallagher, B.L. and Campion, R.P. and Foxon, C.T. (2005) Structural characterisation of MBE grown zinc-blende Ga1-xMnxN/GaAs(001) as a function of Ga flux. In: Microscopy of semiconducting materials: proceedings of the 14th conference: April 11-14, 2005, Oxford, UK. Springer proceedings in physics (107). Springer-Verlag, Berlin, pp. 155-158. ISBN 9783540319146 Hann, David B. and Cherdantsev, Andrey V. and Mitchell, A. and McCarthy, I.N. and Hewakandamby, Buddhika N. and Simmons, Kathy A study of droplet impact on static films using the BB-LIF technique. Experiments in Fluids . ISSN 1432-1114 (In Press) Hao, Ye and Brown, Michael and Harding, Jenny (2014) GIS for all: exploring the barriers and opportunities for underexploited GIS applications. OSGEO Journal, 13 . pp. 19-28. ISSN 1994-1897 Harper, L.T. and Burn, D.T. and Johnson, Michael S. and Warrior, N.A. (2017) Long discontinuous carbon fibre/polypropylene composites for high volume structural applications. Journal of Composite Materials . ISSN 1530-793X Harvey, John and Smith, Andrew and Golightly, David (2017) Critical realism and economic anthropology. Journal of Critical Realism, 16 (5). pp. 431-450. ISSN 1572-5138 Hasan, Ahmed and Bennett, Chris and Shipway, P.H. (2015) A numerical comparison of the flow behaviour in Friction Stir Welding (FSW) using unworn and worn tool geometries. Materials & Design, 87 . pp. 1037-1046. ISSN 0264-1275 Hashim, Atheer and Kyaw, Si and Sun, Wei (2017) Modelling fracture of aged graphite bricks under radiation and temperature. Nuclear Materials and Energy, 11 . pp. 3-11. ISSN 2352-1791 He, Yinfeng and Tuck, Christopher and Prina, Elisabetta and Kilsby, Sam and Christie, Steven D.R. and Edmondson, Steve and Hague, Richard J.M. and Rose, Felicity R.A.J. and Wildman, Ricky D. (2017) A new photocrosslinkable polycaprolactone based ink for three dimensional inkjet printing. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 105 (6). pp. 1645-1657. ISSN 1552-4981 He, Yinfeng and Wildman, Ricky D. and Tuck, Christopher and Christie, Steven D.R. and Edmonson, Steven (2016) An investigation of the behavior of solvent based polycaprolactone ink for material jetting. Scientific Reports . ISSN 2045-2322 He, Yinfeng and Zhang, Fan and Saleh, Ehab and Vaithilingam, Jayasheelan and Aboulkhair, Nesma T. and Begines, Belen and Tuck, Chris J. and Hague, Richard J.M. and Ashcroft, Ian A. and Wildman, Ricky D. (2017) A tripropylene glycol diacrylate-based polymeric support ink for material jetting. Additive Manufacturing, 16 . pp. 153-161. ISSN 2214-8604 Hegab, Abdelrahman and La Rocca, Antonino and Shayler, Paul J. (2016) Towards keeping diesel fuel supply and demand in balance: dual-fuelling of diesel engines with natural gas. Renewable and Sustainable Energy Reviews, 70 . pp. 666-697. ISSN 1364-0321 Herbison, Nicola and MacKeith, Daisy and Vivian, Anthony and Purdy, Jon and Fakis, Apostolos and Ash, Isabel M. and Cobb, Sue V. and Eastgate, Richard M. and Haworth, Stephen M. and Gregson, Richard M. and Foss, Alexander J.E. (2016) Randomised controlled trial of video clips and interactive games to improve vision in children with amblyopia using the I-BiT system. British Journal of Ophthalmology, 100 (11). pp. 1511-1516. ISSN 1468-2079 Hossain, Kazi M. Zakir and Felfel, Reda M. and Grant, David M. and Ahmed, Ifty (2016) Phosphate glass fibres and their composites. In: Bioactive Glasses: Fundamentals, Technology and Applications. Smart Materials Series (23). Royal Society of Chemistry, Cambridge, pp. 257-285. ISBN 9781782629764 Hossain, Kazi M. Zakir and Felfel, Reda M. and Ogbilikana, Prince S. and Thakker, Dhruma and Grant, David M. and Scotchford, C.A. and Ahmed, Ifty (2018) Single solvent based film casting method for the production of porous polymer films. Macromolecular Materials and Engineering, 303 . p. 1700628. ISSN 1438-7492 Hossain, Kazi Md Zakir and Patel, Uresha and Kennedy, Andrew R. and Macri-Pellizzeri, Laura and Sottile, Virginie and Grant, David M. and Scammell, Brigitte E. and Ahmed, Ifty (2018) Porous calcium phosphate glass microspheres for orthobiologic applications. Acta Biomaterialia, 72 . pp. 396-406. ISSN 1878-7568 Houghton, Robert J. and White, Chris and Golightly, David and Wilson, John R. (2016) Span of control in supervision of rail track work. Cognition, Technology & Work, 18 (2). pp. 361-378. ISSN 1435-5558 Houlston, Paul Robert and Garvey, Seamus D. and Popov, Atanas A. (2006) Modal Control of Vibration in Rotating Machines and Other Generally Damped Systems. Houlston, Paul Robert and Garvey, Seamus D. and Popov, Atanas A. (2006) Modal Control of Vibration in Rotating Machines and Other Generally Damped Systems. In: ISMA 2006 International Conference on Noise and Vibration Engineering, 18-20 September 2006, Leuven, Belgium. Houlston, Paul Robert and Garvey, Seamus D. and Popov, Atanas A. (2006) Optimal Controller Designs for Rotating Machines - Penalising the Rate of Change of Control Forcing. In: 7th IFToMM Conference on Rotor Dynamics, 25-28 September 2006, Vienna, Austria. Howard, Sam and Lang, Alexandra. R. and Sharples, Sarah and Shaw, Dominick E. (2016) What are the pros and cons of electronically monitoring inhaler use in asthma?: a multistakeholder perspective. BMJ Open Respiratory Research, 3 (1). e000159/1-e000159/10. ISSN 2052-4439 Hu, Chengliang and Ou, Hengan and Zhao, Zhen (2015) An alternative evaluation method for friction condition in cold forging by ring with boss compression test. Journal of Materials Processing Technology, 224 . pp. 18-25. ISSN 0924-0136 Hu, Chengliang and Yin, Qiang and Zhao, Zhen and Ou, Hengan (2017) A new measuring method for friction factor by using ring with inner boss compression test. International Journal of Mechanical Sciences, 123 . pp. 133-140. ISSN 0020-7403 Hu, Di and Xiao, Wei and Chen, George Zheng (2013) Near-net-shape production of hollow titanium alloy components via electrochemical reduction of metal oxide precursors in molten salts. Metallurgical and Materials Transactions B, 44 (2). pp. 272-282. ISSN 1073-5615 Huang, LePing and Choi, Kwing-So and Fan, BaoChun and Chen, YaoHui (2014) Drag reduction in turbulent channel flow using bidirectional wavy Lorentz force. Science China Physics, Mechanics and Astronomy, 57 (11). pp. 2133-2140. ISSN 1869-1927 Huang, Ruoyu and Becker, Adib A. and Jones, I. Arthur (2015) A finite strain fibre-reinforced viscoelasto-viscoplastic model of plant cell wall growth. Journal of Engineering Mathematics, 95 (1). pp. 121-154. ISSN 0022-0833 Hyde, Christopher J. and Hyde, T.H. and Sun, Wei and Becker, A.A. (2010) Damage mechanics based predictions of creep crack growth in 316 stainless steel. Engineering Fracture Mechanics, 77 (12). pp. 2385-2402. ISSN 0013-7944 Hyde, Christopher J. and Hyde, T.H. and Sun, Wei and Nardone, S. and De Bruycker, E. (2013) Small ring testing of a creep resistant material. Materials Science and Engineering: A, 586 . pp. 358-366. ISSN 0921-5093 Hyde, Christopher J. and Hyde, Thomas H. and Sun, Wei (2017) Small ring testing of high temperature materials. Key Engineering Materials, 734 . pp. 168-175. ISSN 1662-9795 Hyde, Christopher J. and Sun, W. and Hyde, T.H. and Saad, A.A. (2012) Thermo-mechanical fatigue testing and simulation using a viscoplasticity model for a P91 steel. Computational Materials Science, 56 . pp. 29-33. ISSN 0927-0256 Hyde, Christopher J. and Sun, W. and Leen, Sean B. (2010) Cyclic thermo-mechanical material modelling and testing of 316 stainless steel. International Journal of Pressure Vessels and Piping, 87 (6). pp. 365-372. ISSN 0308-0161 Hyde, Christopher J. and Sun, Wei and Hyde, T.H. (2011) An investigation of the failure mechanisms in high temperature materials subjected to isothermal and anisothermal fatigue and creep conditions. Procedia Engineering, 10 . pp. 1157-1162. ISSN 1877-7058 Hyde, Christopher J. and Sun, Wei and Hyde, T.H. (2010) A novel method for obtaining the multiaxiality constant for damage mechanics which is appropriate to crack tip conditions. Journal of Energy and Power Engineering . pp. 129-138. ISSN 1934-8983 Hyde, Christopher J. and Sun, Wei and Hyde, T.H. and Rouse, J.P. and Farragher, T. and O'Dowd, Noel P. and Leen, S.B. (2014) Cyclic viscoplasticity testing and modeling of a service-aged P91 steel. Journal of Pressure Vessel Technology, 136 (4). 044501/1-044501/5. ISSN 1528-8978 Hyde, Christopher J. and Sun, Wei and Hyde, Thomas H. and Saber, Mohammed and Becker, Adib A. (2014) Application of the Liu and Murakami damage model for creep crack growth predictions in power plant steels. In: Computational and Numerical Simulations. InTech, Rieka, Croatia, pp. 175-189. ISBN 9789535112204 Hyde, T H. and Stoyanov, M and Sun, Wei and Hyde, Christopher J. (2010) On the interpretation of results from small punch creep tests. Journal of Strain Analysis for Engineering Design, 45 (3). pp. 141-164. ISSN 2041-3130 Hyde, T. H. and Hyde, Christopher J. and Sun, Wei (2014) A basis for selecting the most appropriate small specimen creep test type. Journal of Pressure Vessel Technology, 136 (2). 024502/1-024502/6. ISSN 1528-8978 Hyde, Thomas H. and Hyde, Christopher J. and Sun, Wei (2013) Theoretical basis and practical aspects of small specimen creep testing. Journal of Strain Analysis for Engineering Design, 48 (2). pp. 112-125. ISSN 2041-3130 IIracheta, O. and Bennett, C.J. and Sun, W. (2017) The influence of the indentation size in relation to the size of the microstructure of three polycrystalline materials indented with a Berkovich indenter. Materials Science and Engineering: A . ISSN 0921-5093 Iracheta, Omar and Bennett, Chris and Sun, Wei (2016) Characterisation of material property variation across an inertia friction welded CrMoV steel component using the inverse analysis of nanoindentation data. International Journal of Mechanical Sciences, 107 . pp. 253-263. ISSN 0020-7403 Iracheta, Omar and Bennett, Chris and Sun, Wei (2015) A sensitivity study of parameters affecting residual stress predictions in finite element modelling of the inertia friction welding process. International Journal of Solids and Structures, 71 . pp. 180-193. ISSN 0020-7683 Isaia, Cristina and McNally, Donal and McMaster, Simon A. and Branson, David T. (2016) Investigation of changes in the electrical properties of novel knitted conductive textiles during cyclic loading. In: 38th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 16-20 August 2016, Orlando, Florida, USA. Ismail, Mohd and Tseng, Kuo-Yu and Claverley, James David and Sheu, Dong-Yea and Chetwynd, Derek and Leach, Richard K. (2016) Investigating mechanical characteristics of styli for micro-CMMs. In: euspen 16th International Conference & Exhibition, 30 May - 3 Jun 2016, Nottingham, UK. JJabbal, Mark (2015) An aerial deployed unmanned glider for cross-Channel flight. International Journal of Unmanned Systems Engineering, 3 (3). pp. 1-20. ISSN 2052-112X Jabbal, Mark and Jeyalingam, Jonne (2017) Towards the noise reduction of piezoelectrical-driven synthetic jet actuators. Sensors and Actuators A: Physical, 266 . pp. 273-284. ISSN 0924-4247 Jabbal, Mark and Tomasso, Valerio (2014) Sensitivity analysis of active flow control systems: operating parameters and configuration design. Journal of Aircraft, 51 (1). pp. 330-335. ISSN 1533-3868 Jackson, G.A. and Chen, H. and Sun, Wei and McCartney, D.G. (2017) The high temperature creep properties of a thermally sprayed CoNiCrAlY coating via small punch creep testing. Key Engineering Materials, 734 . pp. 37-48. ISSN 1662-9795 Jackson, G.A. and Sun, Wei and McCartney, D.G. (2017) The application of the small punch tensile test to evaluate the ductile to brittle transition of a thermally sprayed CoNiCrAlY coating. Key Engineering Materials, 734 . pp. 144-155. ISSN 1662-9795 Jia, Jiangang and Siddiq, Abdur R. and Kennedy, Andrew R. (2015) Porous titanium manufactured by a novel powder tapping method using spherical salt bead space holders: characterisation and mechanical properties. Journal of the Mechanical Behavior of Biomedical Materials, 48 . pp. 229-240. ISSN 1751-6161 Jiang, Guozhan and Pickering, Stephen J. (2017) Recycling graphene from supercapacitor electrodes as reinforcing filler for epoxy resins. Waste and Biomass Valorization . ISSN 1877-2641 Jiang, Guozhan and Pickering, Stephen J. (2016) Recycling supercapacitors based on shredding and mild thermal treatment. Waste Management, 48 . pp. 465-470. ISSN 1879-2456 Jiang, Guozhan and Pickering, Stephen J. (2016) Structure–property relationship of recycled carbon fibres revealed by pyrolysis recycling process. Journal of Materials Science, 51 (4). pp. 1949-1958. ISSN 0022-2461 Jiang, Guozhan and Turner, Thomas A. and Pickering, Stephen J. (2016) The shear viscosity of carbon fibre suspension and its application for fibre length measurement. Rheologica Acta, 55 (1). pp. 1-10. ISSN 0035-4511 Jin, X. and Shipway, P.H. and Sun, Wei (2017) The role of temperature and frequency on fretting wear of a like-on-like stainless steel contact. Tribology Letters, 65 . 77/1-77/15. ISSN 1573-2711 Jin, X. and Sun, Wei and Shipway, P.H. (2016) The role of geometry changes and debris formation associated with wear on the temperature field in fretting contacts. Tribology International, 102 . pp. 392-406. ISSN 1879-2464 Johanson, K. and Harper, L.T. and Johnson, Michael S. and Warrior, N.A. (2015) Heterogeneity of discontinuous carbon fibre composites: damage initiation captured by Digital Image Correlation. Composites Part A: Applied Science and Manufacturing, 68 . pp. 304-312. ISSN 1359-835X Jones, Connor and Hann, David B. and Voisey, K.T. and Aitken, Scott (2017) Application of high speed filming techniques to the study of rearwards melt ejection in laser drilling. Journal of Laser Applications, 29 (2). 022204/1-022204/9. ISSN 1042-346X KKakimpa, Bruce and Morvan, Herve and Hibberd, Stephen (2017) A coupled 1D film hydrodynamics and core gas flow model for air-oil flows in aero-engine bearing chambers. In: ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition, 26-30 June 2017, Charlotte, North Carolina, USA. Kang, JiJun and Becker, Adib A. and Sun, Wei (2015) Determination of elastic and viscoplastic material properties obtained from indentation tests using a combined finite element analysis and optimization approach. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 229 (3). pp. 175-188. ISSN 2041-3076 Karunaratne, M.S.A. and Kyaw, Si Thu and Jones, Arthur and Morrell, Roger and Thomson, Rachel C. (2016) Modelling the coefficient of thermal expansion in Ni-based superalloys and bond coatings. Journal of Materials Science, 51 (9). pp. 4213-4226. ISSN 1573-4803 Kay, E.D. and Hibberd, S. and Power, H. (2013) Inertial effects at moderate Reynolds number in thin-film rimming flows driven by surface shear. Physics of Fluids, 25 (10). 102108-1-102108-24. ISSN 1089-7666 Kay, E.D. and Hibberd, Stephen and Power, H. (2017) A multi-layer integral model for locally-heated thin film flow. Journal of Computational Physics, 336 . pp. 51-68. ISSN 0021-9991 Kay, E.D. and Hibberd, Stephen and Power, H. (2014) A depth-averaged model for non-isothermal thin-film rimming flow. International Journal of Heat and Mass Transfer, 70 . pp. 1003-1015. ISSN 0017-9310 Keane, David and Lang, Alexandra. R. and Craven, Michael P. and Sharples, Sarah (2012) The use of vignettes for conducting healthcare research. In: Advances in human aspects of healthcare. Advances in Human Factors and Ergonomics Series . CRC Press, Boca Raton, USA, pp. 451-460. ISBN 978-1-4398-7021-1 Kefalidou, Genovefa and Sharples, Sarah (2016) Encouraging serendipity in research: designing technologies to support connection-making. International Journal of Human-Computer Studies, 89 . pp. 1-23. ISSN 1071-5819 Kellens, Karel and Baumers, Martin and Gutowski, Timothy G. and Flanagan, William and Lifset, Reid and Duflou, Joost R. (2017) Environmental dimensions of additive manufacturing: mapping application domains and their environmental implications. Journal of Industrial Ecology . ISSN 1530-9290 Khan, Mushtaq and Dickens, Phill (2014) Selective laser melting (SLM) of pure gold for manufacturing dental crowns. Rapid Prototyping Journal, 20 (6). pp. 471-479. ISSN 1758-7670 Khodabakhshi, Khosrow and Gilbert, Marianne and Fathi, Saeed and Dickens, Philip (2013) Anionic polymerisation of caprolactam at the small-scale via DSC investigations. Journal of Thermal Analysis and Calorimetry, 115 (1). pp. 383-391. ISSN 1572-8943 Kim, Jung-Hoon and Forte, Maxime and Choi, Kwing-So (2017) BUTERFLI D3.19 Report. [Experiment] (Unpublished) Kim, Jung-hoon and Choi, Kwing-So (2016) BUTERLI D3.14 Report. [Experiment] (Unpublished) Kolluru, Kiran V. and Axinte, Dragos A. and Raffles, Mark H. and Becker, Adib A. (2014) Vibration suppression and coupled interaction study in milling of thin wall casings in the presence of tuned mass dampers. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 228 (6). pp. 826-936. ISSN 2041-2975 Kone, Jean-Paul and Zhang, Xinyu and Yan, Yuying and Hu, Guilin and Ahmadi, Goodarz (2017) Three-dimensional multiphase flow computational fluid dynamics models for proton exchange membrane fuel cell: a theoretical development. Journal of Computational Multiphase Flows, 9 (1). pp. 3-25. ISSN 1757-4838 Kong, Chang-Jing and Brown, Paul D. and Horlock, Andrew J. and Harris, Sam J. and McCartney, D. Graham (2001) Microstructural characterisation of a high velocity oxy-fuel thermally sprayed Al-12wt.%Sn-1wt.%Cu alloy. In: Electron microscopy and analysis 2001: proceedings of the Institute of Physics Electron Microscopy and Analysis Group Conference, University of Dundee, 5-7 September 2001. Institute of Physics conference series (168). IOP Publishing Ltd, Bristol, pp. 227-230. ISBN 9780750308120 Kong, Chang-Jing and Moldovan, Grigore and Fay, Mike W. and McCartney, D. Graham and Brown, Paul D. (2004) Characterisation of dispersions within annealed HVOLF thermally sprayed AlSnCu coatings. In: Electron Microscopy and Analysis 2003: Proceedings of the Institute of Physics Electron Microscopy and Analysis Group Conference, University of Oxford, 3-5 September 2003. Institute of Physics conference series (179). Institute of Physics Publishing, Bristol, pp. 245-248. ISBN 0750309679 Kong, Gaoning and McCartney, D. Graham and Brown, Paul D. (2004) The application of tripod polishing and focused ion beam milling to the TEM specimen preparation of HVOF thermally sprayed coatings. In: Electron microscopy and analysis 2003: proceedings of the Institute of Physics Electron Microscopy and Analysis Group Conference, University of Oxford, 3-5 September 2003. Institute of Physics conference series (179). Institute of Physics Publishing, Bristol, pp. 363-366. ISBN 0750309679 Kyaw, Si and Jones, Arthur and Jepson, Mark A.E. and Hyde, Tom and Thomson, Rachel C. (2017) Effects of three-dimensional coating interfaces on thermo-mechanical stresses within plasma spray thermal barrier coatings. Materials & Design . ISSN 0264-1275 (In Press) Kyaw, Si Thu and Rouse, James Paul and Lu, J. and Sun, Wei (2016) Effects of surface roughness on thermo-mechanical fatigue life of a P91 power plant steel. Procedia Structural Integrity, 2 . pp. 664-672. ISSN 2452-3216 Kyaw, Si Thu and Sun, W. and Becker, Adib A. (2015) Effects of compositions of filler, binder and porosity on elastic and fracture properties of nuclear graphite. Journal of Nuclear Materials, 457 . pp. 42-47. ISSN 0022-3115 Kyobula, Mary and Adedeji, Aremu and Alexander, Morgan R. and Saleh, Ehab and Wildman, Ricky D. and Ashcroft, Ian and Gellert, Paul R. and Roberts, Clive J. (2017) 3D inkjet printing of tablets exploiting bespoke complex geometries for controlled and tuneable drug release. Journal of Controlled Release, 261 . pp. 207-215. ISSN 1873-4995 Körner, Lars and Lawes, Simon and Newton, Lewis and Senin, Nicola and Leach, Richard K. (2018) Effects of sinogram interpolation for increasing throughput rate of surface topography measurements using X-ray computed tomography. In: 3rd Dimensional X-ray Computed Tomography Conference, 2-3 Jul 2018, University of Nottingham. (Unpublished) LLa Rocca, A. and Bonatesta, F. and Fay, M.W. and Campanella, F. (2015) Characterisation of soot in oil from a gasoline direct injection engine using Transmission Electron Microscopy. Tribology International, 86 . pp. 77-84. ISSN 0301-679X La Rocca, A. and Xu, Z. and Arumugam, P. and Pickering, S.J. and Eastwick, Carol and Gerada, C. and Bozhko, S. (2016) Thermal management of a high speed permanent magnet machine for an aeroengine. In: XXIIth International Conference on Electrical Machines (ICEM '2016), 4-7 September 2016, Lausanne, Switzerland. La Rocca, Antonino and Campbell, J. and Fay, Mike W. and Orhan, O. (2016) Soot-in-oil 3D volume reconstruction through the use of electron tomography: an introductory study. Tribology Letters, 61 (1). 8/1-8/15. ISSN 1573-2711 Lang, Alexandra. R. and Martin, Jennifer. L. and Sharples, Sarah and Crowe, John A. (2010) Adolescent participation in HTA: the identification of appropriate proxies for adolescent user needs of medical devices. In: 7th Annual Conference of the International Society for Health Technology Assessment (HTAi 2010),, 6th-9th June 2010., Dublin, Ireland. (Unpublished) Langston, P. and Kennedy, Andrew R. (2014) Discrete element modelling of the packing of spheres and its application to the structure of porous metals made by infiltration of packed beds of NaCl beads. Powder Technology, 268 . pp. 210-218. ISSN 0032-5910 Langston, Paul and Kennedy, Andrew R. and Constantin, Hannah (2015) Discrete element modelling of flexible fibre packing. Computational Materials Science, 96 (A). pp. 108-116. ISSN 0927-0256 Large, David and Crundall, Elizabeth and Burnett, Gary and Harvey, Catherine and Konstantopoulos, Panos (2016) Driving without wings: the effect of different digital mirror locations on the visual behaviour, performance and opinions of drivers. Applied Ergonomics, 55 . pp. 138-148. ISSN 1872-9126 Lawson, Glyn and Herriotts, Paul and Malcolm, Louise and Gabrecht, Katharina and Hermawati, Setia (2015) The use of virtual reality and physical tools in the development and validation of ease of entry and exit in passenger vehicles. Applied Ergonomics, 48 . pp. 240-251. ISSN 0003-6870 Lawson, Glyn and Salanitri, Davide and Waterfield, Brian (2016) Future directions for the development of Virtual Reality within an automotive manufacturer. Applied Ergonomics, 53 (B). pp. 323-330. ISSN 0003-6870 Lawson, Glyn and Sharples, Sarah and Clarke, David and Cobb, Sue (2009) Development of a technique for predicting the human response to an emergency situation. In: HCI International 2009, July 19-24, 2009, San Diego. Lawson, Glyn and Sharples, Sarah and Cobb, Sue and Clarke, David (2009) Predicting the human response to an emergency. In: Contemporary Ergonomics 2009, 22-23 April 2009, London. Lawson, Glyn and Stedmon, Alex and Zhang, Chloe and Eubanks, Dawn and Frumkin, Lara (2011) Deception and self-awareness. In: HCII 2011, 9-14 July 2014, Orlando, Florida. Lee, Darren S. and Amara, Zacharias and Clark, Charlotte A. and Xu, Zeyuan and Kakimpa, Bruce and Morvan, Herve and Pickering, S.J. and Poliakoff, Martyn and George, Michael W. (2017) Continuous photo-oxidation in a vortex reactor: efficient operations using air drawn from the laboratory. Organic Process Research and Development, 21 (7). pp. 1042-1050. ISSN 1520-586X Lewis, Laura and Harshada, Patel and Cobb, Sue and D'Cruz, Mirabelle and Bues, Matthias and Stefani, Oliver and Tredeaux, Grobler (2016) Distracting people from sources of discomfort in a simulated aircraft environment. Work, 54 (4). pp. 963-979. ISSN 1875-9270 Lewis, Laura and Patel, Harshada and D’Cruz, Mirabelle and Cobb, Sue (2017) What makes a space invader?: passenger perceptions of personal space invasion in aircraft travel. Ergonomics, 60 (11). pp. 1461-1470. ISSN 1366-5847 Li, Dong-Feng and Barrett, Richard A. and O’Donoghue, Padraic E. and Hyde, Christopher J. and O’Dowd, Noel P. and Leen, Sean B. (2016) Micromechanical finite element modelling of thermo-mechanical fatigue for P91 steels. International Journal of Fatigue, 87 . pp. 192-202. ISSN 0142-1123 Li, Hao Nan and Axinte, Dragos (2018) On the inverse design of discontinuous abrasive surface to lower friction-induced temperature in grinding: an example of engineered abrasive tools. International Journal of Machine Tools and Manufacture, 132 . pp. 50-63. ISSN 0890-6955 Li, Linhao and Li, Ming and Reaney, Ian M. and Sinclair, Derek C. (2017) Mixed ionic-electronic conduction in K1/2Bi1/2TiO3. Journal of Materials Chemistry C, 5 (25). pp. 6300-6310. ISSN 2050-7526 Li, Linhao and Li, Ming and Sinclair, Derek C. (2018) The influence of excess K2O on the electrical properties of (K,Na)1/2Bi1/2TiO3 ceramics. Applied Physics Letters, 112 . p. 182907. ISSN 1077-3118 Li, Shuguang and Yan, Jiayi and Zhang, Guofan and Duan, Shihui (2018) Commutativity of the strain energy density expression for the benefit of the FEM implementation of Koiter's initial postbuckling theory. International Journal for Numerical Methods in Engineering . ISSN 1097-0207 Li, Xiang and Bai, Ruibin and McKechnie, Jon (2016) Environmental and financial performance of mechanical recycling of carbon fibre reinforced polymers and comparison with conventional disposal routes. Journal of Cleaner Production, 127 . pp. 451-460. ISSN 1879-1786 Liu, D. and Kyaw, S.T. and Flewitt, P.E.J. and Seraffon, M. and Simms, N.J. and Pavier, M. and Jones, I.A. (2014) Residual stresses in environmental and thermal barrier coatings on curved superalloy substrates: experimental measurements and modelling. Materials Science and Engineering: A, 606 . pp. 117-126. ISSN 0921-5093 Liu, M.Y. and Cheung, C.F. and Feng, X. and Wang, C.J. and Leach, R.K. (2018) A self-calibration rotational stitching method for precision measurement of revolving surfaces. Precision Engineering . ISSN 0141-6359 Lu, B. and Fang, Y. and Xu, D.K. and Chen, J. and Ai, S. and Long, H. and Ou, H. and Cao, J. (2015) Investigation of material deformation mechanism in double side incremental sheet forming. International Journal of Machine Tools & Manufacture, 93 . pp. 37-48. ISSN 0890-6955 Lu, B. and Fang, Y. and Xu, D.K. and Chen, J. and Ou, H. and Moser, N.H. and Cao, J. (2014) Mechanism investigation of friction-related effects in single point incremental forming using a developed oblique roller-ball tool. International Journal of Machine Tools & Manufacture, 85 . pp. 14-29. ISSN 0890-6955 Lu, B. and Ou, H. and Shi, S.Q. and Long, H. and Chen, J. (2016) Titanium based cranial reconstruction using incremental sheet forming. International Journal of Material Forming, 9 (3). pp. 361-370. ISSN 1960-6214 Lu, J. and Campbell-Brown, A. and Tu, Shan-Tung and Sun, Wei (2017) Determination of creep damage properties from miniature thin beam bending using an inverse approach. Key Engineering Materials, 734 . pp. 260-272. ISSN 1662-9795 Lu, Jiawa and Sun, Wei and Becker, Adib A. (2016) Material characterization and finite element modelling of cyclic plasticity behavior for 304 stainless steel using a crystal plasticity model. International Journal of Mechanical Sciences, 105 . pp. 315-329. ISSN 0020-7403 Lu, Jiawa and Sun, Wei and Becker, Adib A. and Saad, Abdullah Aziz (2015) Simulation of the fatigue behaviour of a power plant steel with a damage variable. International Journal of Mechanical Sciences, 100 . pp. 145-157. ISSN 0020-7403 MMa, Nan and Yu, Jingjun and Dong, Xin and Axinte, Dragos (2018) Design and stiffness analysis of a class of 2-DoF tendon driven parallel kinematics mechanism. Mechanism and Machine Theory, 129 . pp. 202-217. ISSN 1873-3999 Ma, Nan and Yu, Jingjun and Dong, Xin and Axinte, Dragos A. (2018) Design and stiffness analysis of A class of 2-DoF tendon driven parallel kinematic mechanism. Mechanism and Machine Theory, 129 . pp. 202-217. ISSN 1873-3999 MacAulay, Gavin D. and Senin, Nicola and Giusca, Claudiu L. and Leach, Richard K. (2016) Study of manufacturing and measurement reproducibility on a laser textured structured surface. Measurement . ISSN 0263-2241 Maculotti, Giacomo and Feng, Xiaobing and Galetto, Maurizio and Leach, Richard K. (2018) Noise evaluation of a point autofocus surface topography measuring instrument. Measurement Science and Technology, 29 (6). 065008. ISSN 1361-6501 Madigan, Ruth and Golightly, David and Madders, Richard (2016) Application of Human Factors Analysis and Classification System (HFACS) to UK rail safety of the line incidents. Accident, Analysis and Prevention, 97 . pp. 122-131. ISSN 0001-4575 Maiolino, Perla and Woolley, Richard and Branson, David T. and Benardos, Panorios and Popov, Atanas A. and Ratchev, Svetan (2017) Flexible robot sealant dispensing cell using RGB-D sensor and off-line programming. Robotics and Computer-Integrated Manufacturing, 48 . pp. 188-195. ISSN 1879-2537 Marlafeka, S. and Allison, F. and Grant, D.M. and Harrison, P.G. and Brown, Paul D. (2001) Microstructural characterisation of biocompatible sol-gel derived vanadium doped TiO2 on Ti substrates. In: Electron microscopy and analysis 2001: proceedings of the Institute of Physics Electron Microscopy and Analysis Group Conference, University of Dundee, 5-7 September 2001. Institute of Physics conference series (168). IOP Publishing Ltd, Bristol, pp. 381-384. ISBN 9780750308120 Marlafeka, S. and Grant, D.M. and Brown, Paul D. (2004) RHEED characterisation of the near surface microstructure of Ti-O based biocompatible coatings. In: Electron Microscopy and Analysis 2003: Proceedings of the Institute of Physics Electron Microscopy and Analysis Group Conference, University of Oxford, 3-5 September 2003. Institute of Physics conference series (179). Institute of Physics Publishing, Bristol, pp. 155-158. ISBN 0750309679 Mauri, Arabella and Ehret, Alexander E. and De Focatiis, Davide S.A. and Mazza, Edoardo (2016) A model for the compressible, viscoelastic behavior of human amnion addressing tissue variability through a single parameter. Biomechanics and Modeling in Mechanobiology, 15 (4). pp. 1005-1017. ISSN 1617-7940 Mauri, Arabella and Perrini, Michela and Ehret, Alexander E. and De Focatiis, Davide S.A. and Mazza, Edoardo (2015) Time-dependent mechanical behavior of human amnion: Macroscopic and microscopic characterization. Acta Biomaterialia, 11 . pp. 314-323. ISSN 1878-7568 McCarron, Ruby and Stewart, David and Shipway, Philip and Dini, Daniele (2017) Sliding wear analysis of cobalt based alloys in nuclear reactor conditions. Wear, 376-377 (B). pp. 1489-1501. ISSN 1873-2577 McKinlay, K.J. and Scotchford, C.A. and Grant, D.M. and Oliver, J.M. and King, John R. and Brown, Paul D. (2004) Scanning electron microscopy of biomaterials. In: Electron Microscopy and Analysis 2003: Proceedings of the Institute of Physics Electron Microscopy and Analysis Group Conference, University of Oxford, 3-5 September 2003. Institute of Physics conference series (179). Institute of Physics Publishing, Bristol, pp. 87-90. ISBN 0750309679 Meng, Fanran and McKechnie, Jon and Pickering, Steve J. (2018) An assessment of financial viability of recycled carbon fibre in automotive applications. Composites Part A: Applied Science and Manufacturing, 109 . pp. 207-220. ISSN 1359-835X Meng, Fanran and McKechnie, Jon and Turner, Thomas and Wong, Kok H. and Pickering, Stephen J. (2017) Environmental aspects of use of recycled carbon fibre composites in automotive applications. Environmental Science & Technology, 51 (21). pp. 12727-12736. ISSN 0013-936X Meng, Fanran and Olivetti, Elsa A. and Zhao, Youyang and Chang, Jiyoun C. and Pickering, Stephen J. and McKechnie, Jon (2018) Comparing life cycle energy and global warming potential of carbon fibre composite recycling technologies and waste management options. ACS Sustainable Chemistry & Engineering . ISSN 2168-0485 Mieszala, M. and Lozano Torrubia, Pablo and Axinte, Dragos A. and Schwiedrzik, J.J. and Mischler, S. and Michler, J. (2017) Erosion mechanisms during abrasive waterjet machining: model microstructures and single particle experiments. Journal of Materials Processing Technology, 247 . pp. 92-102. ISSN 0924-0136 Milton, Gareth and Blore, Paul and Tufail, Khizer and Coates, Barnaby Paul and Newbigging, Ian and Cooper, Allan and Shayler, Paul J. (2017) CO2 reduction through low cost electrification of the diesel powertrain at 48V. SAE Technical Paper Series . ISSN 0148-7191 (Unpublished) Mitchell-Smith, Jonathon and Murray, J.W. and Kunieda, M. and Clare, A.T. (2014) Electrolyte jet machining for surface texturing of Inconel 718. In: 10th International Symposium on Electrochemical Machining Technology (INSECT 2014), 13-14 Nov 2014, Saarbrücken, Germany. Mitchell-Smith, Jonathon and Speidel, Alistair and Bisterov, Ivan and Clare, A.T. (2018) Electrolyte multiplexing in electrochemical jet processing. Procedia CIRP, 68 . pp. 483-487. ISSN 2212-8271 Mitchell-Smith, Jonathon and Speidel, Alistair and Gaskell, Jennifer and Clare, Adam T. (2017) Energy distribution modulation by mechanical design for electrochemical jet processing techniques. International Journal of Machine Tools and Manufacture, 122 . pp. 32-46. ISSN 0890-6955 Moldovan, Grigore and Harrison, Ian and Brown, Paul D. (2003) EBIC study of Au / n-type GaN Schottky contacts. In: Microscopy of semiconducting materials 2003 : proceedings of the Institute of Physics conference, Cambridge University, 31 March - 3 April 2003. Institute of Physics conference series (180). IOP Publishing Ltd, Bristol, pp. 577-580. ISBN 9780750309790 Morris, A. and Cacciapuoti, B. and Sun, Wei (2019) The role of hardness on condition monitoring and lifing for high temperature power plant structural risk management. Measurement, 131 . pp. 501-512. ISSN 0263-2241 Morris, A. and Cacciapuoti, B. and Sun, Wei (2017) The role of small specimen creep testing within a life assessment framework for high temperature power plant. International Materials Reviews, 63 (2). pp. 102-137. ISSN 1743-2804 Moschetti, Guiseppe and Forbes, Alistair and Leach, Richard K. and Jiang, Xiang and O'Connor, Daniel (2016) Phase and fringe order determination in wavelength scanning interferometry. Optics Express, 24 (8). pp. 8997-9012. ISSN 1094-4087 Murray, J.W. and Algodi, Samer J. and Fay, Mike W. and Brown, Paul D. and Clare, Adam T. (2016) Formation mechanism of electrical discharge TiC-Fe composite coatings. Journal of Materials Processing Technology, 243 . pp. 143-151. ISSN 0924-0136 Murray, J.W. and Zuccoli, M.V. and Hussain, Tanvir (2017) Heat treatment of cold-sprayed C355 Al for repair: microstructure and mechanical properties. Journal of Thermal Spray Technology . ISSN 1544-1016 Murray, James W. and Leva, Alessandro and Joshi, Shrikant and Hussain, Tanvir (2018) Microstructure and wear behaviour of powder and suspension hybrid Al2O3–YSZ coatings. Ceramics International . ISSN 1873-3956 Musso, Giuseppe and Senin, Nicola and Galetto, Maurizio and Leach, Richard K. (2016) Towards uncertainty in dimensional metrology of surface features for advanced manufacturing. In: euspen 16th International Conference & Exhibition, 30 May - 3 Jun 2016, Nottingham, UK. NNaghiyev, Arzoo and Sharples, Sarah and Ryan, Brendan and Coplestone, Anthony and Carey, Mike (2017) Expert knowledge elicitation to generate human factors guidance for future European rail traffic management system (ERTMS) train driving models. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit . ISSN 2041-3017 (In Press) Newton, Lewis and Senin, Nicola and Leach, Richard (2017) Focus variation measurement of electron beam melted surfaces. In: 16th Conference on Metrology and properties of Engineering Surfaces, 27-29 June 2017, Göteborg, Sweden. Niu, Jie and Choo, Hui Leng and Sun, Wei and Mok, Sui Him (2018) Analytical solution and experimental study of effective Young’s modulus of SLM-fabricated lattice structure with triangular unit cells. Journal of Manufacturing Science and Engineering, 140 (9). 091008. ISSN 1528-8935 Niu, Jie and Choo, Hui Leng and Sun, Wei and Mok, Sui Him (2017) Numerical study on load-bearing capabilities of beam-like lattice structures with three different unit cells. International Journal of Mechanics & Materials in Design . ISSN 1573-8841 OOrhan, O. and Haffner-Staton, Ephraim and La Rocca, Antonino and Fay, Mike W. (2016) Characterisation of flame-generated soot and soot-in-oil using electron tomography volume reconstructions and comparison with traditional 2D-TEM measurements. Tribology International, 104 . pp. 272-284. ISSN 1879-2464 Oun, Hatem and Kennedy, Andrew R. (2015) Tailoring the pressure-drop in multi-layered open-cell porous inconel structures. Journal of Porous Materials, 22 (6). pp. 1627-1633. ISSN 1573-4854 Oun, Hatem and Kennedy, Andrew R. (2014) Experimental investigation of pressure-drop characteristics across multi-layer porous metal structures. Journal of Porous Materials, 21 (6). pp. 1133-1141. ISSN 1573-4854 Owoseni, T.A. and Murray, J.W. and Pala, Z. and Lester, Edward and Grant, David and Hussain, Tanvir (2018) Suspension high velocity oxy-fuel (SHVOF) spray of delta-theta alumina suspension: phase transformation and tribology. Surface and Coatings Technology . ISSN 0257-8972 Oyelola, Olusola and Crawforth, Pete and M'Saoubi, Rachid and Clare, Adam T. (2016) Machining of additively manufactured parts: implications for surface integrity. Procedia CIRP, 45 . pp. 119-122. ISSN 2212-8271 Oyelola, Olusola and Crawforth, Pete and M’Saoubi, Rachid and Clare, Adam T. (2018) On the machinability of directed energy deposited Ti6Al4V. Additive Manufacturing, 19 . pp. 39-50. ISSN 2214-8604 PPanesar, Ajit and Abdi, Meisam and Hickman, Duncan and Ashcroft, Ian (2018) Strategies for functionally graded lattice structures derived using topology optimisation for additive manufacturing. Additive Manufacturing, 19 . pp. 81-94. ISSN 2214-8604 Patel, Harshada and D'Cruz, Mirabelle (2018) Passenger-centric factors influencing the experience of aircraft comfort. Transport Reviews, 38 (2). pp. 252-269. ISSN 1464-5327 Patel, R. and McWilliam, S. and Popov, A.A. (2014) Optimization of piezoelectric cantilever energy harvesters including non-linear effects. Smart Materials and Structures, 23 (8). 085002/1-085002/17. ISSN 1361-665X Patel, R. and McWilliam, S. and Popov, A.A. (2011) A geometric parameter study of piezoelectric coverage on a rectangular cantilever energy harvester. Smart Materials and Structures, 20 (8). 085004/1-085004/12. ISSN 0964-1726 Patel, Uresha and Moss, R.M. and Hossain, Kazi M. Zakir and Kennedy, Andrew R. and Barney, Emma R. and Ahmed, Ifty and Hannon, Alex C. (2017) Structural and physico-chemical analysis of calcium/strontium substituted, near-invert phosphate based glasses for biomedical applications. Acta Biomaterialia, 60 . pp. 109-127. ISSN 1878-7568 Patiño, Iván David and Power, H. and Londoño, Cćsar Nieto and Flόrez, Whady Felipe (2017) Stokes–Brinkman formulation for prediction of void formation in dual-scale fibrous reinforcements: a BEM/DR-BEM simulation. Computational Mechanics . ISSN 0178-7675 Patiño Arcila, Iván David and Power, Henry and Nieto Londoño, César and Flórez Escobar, Whady Felipe (2016) Boundary element simulation of void formation in fibrous reinforcements based on the Stokes–Darcy formulation. Computer Methods in Applied Mechanics and Engineering, 304 . pp. 265-293. ISSN 1879-2138 Pegg, Elise C. and Matboli, Faisal and Marriott, Tim and Khan, Imran and Scotchford, Colin (2014) Topographical and chemical effects of electrochemically assisted deposited hydroxyapatite coatings on osteoblast-like cells. Journal of Biomaterials Applications, 28 (6). pp. 946-953. ISSN 1530-8022 Petkov, Markian P. and Hyde, Christopher J. and Hyde, Thomas H. (2016) Practical considerations of the use of cross-weld and compact tension specimens creep data. Journal of Strain Analysis for Engineering Design, 51 (3). pp. 179-206. ISSN 0309-3247 Pfau, Sebastian A. and La Rocca, Antonino and Haffner-Staton, Ephraim and Rance, Graham A. and Fay, Mike W. and Brough, Robert J. and Malizia, Simone (2018) Comparative nanostructure analysis of gasoline turbocharged direct injection and diesel soot-in-oil with carbon black. Carbon, 139 . pp. 342-352. ISSN 0008-6223 Porcheron, Martin and Fischer, Joel E. and Sharples, Sarah (2016) “Do animals have accents?”: talking with agents in multi-party conversation. In: 20th ACM Conference on Computer-Supported Cooperative Work and Social Computing (CSCW 2017), 25 Feb-01 Mar 2017, Portland, Oregon, USA. (In Press) Porcheron, Martin and Fischer, Joel E. and Sharples, Sarah (2016) Using mobile phones in pub talk. In: 19th ACM Conference on Computer Supported Cooperative Work & Social Computing (CSCW ’16), 27 Feb – 2 Mar 2016, San Francisco, USA. Power, H. and Caruso, N. and Portapila, M. (2017) A note on the use of the Companion Solution (Dirichlet Green's function) on meshless boundary element methods. Engineering Analysis with Boundary Elements, 75 . pp. 57-64. ISSN 0955-7997 QQian, C.C. and Harper, L.T. and Turner, T.A. and Warrior, N.A. (2015) Structural optimisation of random discontinuous fibre composites: Part 1 – Methodology. Composites Part A: Applied Science and Manufacturing, 68 . pp. 406-416. ISSN 1359-835X Qian, C.C. and Harper, L.T. and Turner, T.A. and Warrior, N.A. (2015) Structural optimisation of random discontinuous fibre composites: Part 2 - case study. Composites Part A: Applied Science and Manufacturing, 68 . pp. 417-424. ISSN 1359-835X Qian, Guian and Niffenegger, Markus and Sharabi, Medhat and Lafferty, Nathan (2018) Effect of non-uniform reactor cooling on fracture and constraint of a reactor pressure vessel. Fatigue & Fracture of Engineering Materials & Structures, 41 (7). pp. 1559-1575. ISSN 1460-2695 Qin, W. and Jin, X. and Kirk, A. and Shipway, P.H. and Sun, Wei (2018) Effects of surface roughness on local friction and temperature distributions in a steel-on-steel fretting contact. Tribology International, 120 . pp. 350-357. ISSN 1879-2464 Quah, Conal and Yeoman, Mark S. and Cizinauskas, Andrius and Cooper, Kevin and McNally, Donal and Boszczyk, Bronek (2014) Finite element investigation of the effect of spina bifida on loading of the vertebral isthmus. Spine Journal, 14 (4). pp. 675-682. ISSN 1529-9430 RRabani, Amir and Senin, Nicola and Helmli, Franz and Butler-Smith, Paul and Leach, Richard K. (2016) An integrated measurement method for complex micro-scale geometries. In: euspen 16th International Conference & Exhibition, 30 May - 3 Jun 2016, Nottingham, UK. Reddy, Liam and Preston, Simon P. and Shipway, P.H. and Davis, C. and Hussain, Tanvir (2018) Process parameter optimisation of laser clad iron based alloy: predictive models of deposition efficiency, porosity and dilution. Surface and Coatings Technology, 349 . pp. 198-207. ISSN 1879-3347 Richardson, Miles and Maspero, Marta and Golightly, David and Sheffield, David and Staples, Vicki and Lumber, Ryan (2016) Nature: a new paradigm for well-being and ergonomics. Ergonomics . ISSN 1366-5847 Rouse, J.P. and Zacharzewski, Piotr and Hyde, C.J. and Jefferson-Loveday, Richard J. and Morris, A. and Kyaw, S.T. (2018) A case study investigation into the effects of spatially dependent convection coefficients on the fatigue response of a power plant header component. International Journal of Fatigue, 113 . pp. 137-148. ISSN 0142-1123 Rouse, James and Hyde, Christopher J. (2016) A comparison of simple methods to incorporate material temperature dependency in the Green’s function method for estimating transient thermal stresses in thick-walled power plant components. Materials, 9 (1). p. 26. ISSN 1996-1944 Rouse, James Paul and Garvey, Seamus D. and Cardenas, B. and Davenne, T.R. (2018) A series hybrid “real inertia” energy storage system. Journal of Energy Storage, 20 . pp. 1-15. ISSN 2352-152X Rouse, James Paul and Hyde, Christopher J. and Sun, W. and Hyde, T.H. (2014) Effective determination of cyclic-visco-plasticity material properties using an optimisation procedure and experimental data exhibiting scatter. Materials at High Temperatures, 30 (2). pp. 117-128. ISSN 1878-6413 Rouse, James Paul and Hyde, Christopher J. and Sun, W. and Hyde, T.H. (2013) Pragmatic optimisation methods for determining material constants of viscoplasticity model from isothermal experimental data. Materials Science and Technology, 30 (1). pp. 54-62. ISSN 1743-2847 Rouse, James Paul and Hyde, Christopher J. and Sun, Wei and Hyde, T.H. (2013) Comparison of several optimisation strategies for the determination of material constants in the Chaboche visco-plasticity model. Journal of Strain Analysis for Engineering Design, 48 (6). pp. 347-363. ISSN 2041-3130 Ruiter, Floor Agnes Andrea and Alexander, Cameron and Rose, Felicity R.A.J. and Segal, Joel (2017) A design of experiments (DoE) approach to identify the influencing parameters that determine poly-D,L-lactic acid (PDLLA) electrospun scaffold morphologies. Biomedical Materials, 12 (5). 055009/1-055009/11. ISSN 1748-605X Rushworth, Adam and Axinte, Dragos and Raffles, Mark and Cobos-Guzman, Salvador (2016) A concept for actuating and controlling a leg of a novel walking parallel kinematic machine tool. Mechatronics, 40 . pp. 63-77. ISSN 0957-4158 Ryan, Brendan (2017) What do we know about rail suicide incidents?: analysis of 257 fatalities on the rail network in Great Britain. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 231 (10). pp. 1150-1173. ISSN 2041-3017 SSaad, A.A. and Hyde, Christopher J. and Sun, Wei and Hyde, T.H. (2011) Thermal-mechanical fatigue simulation of a P91 steel in a temperature range of 400–600°C. Materials at High Temperatures, 28 (3). pp. 212-218. ISSN 1878-6413 Saad, Abdullah Aziz and Hyde, T.H. and Sun, W. and Hyde, Christopher J. and Tanner, David W. J. (2013) Characterization of viscoplasticity behaviour of P91 and P92 power plant steels. International Journal of Pressure Vessels and Piping, 111-112 . pp. 246-252. ISSN 0308-0161 Saad, Abdullah Aziz and Sun, Wei and Tobi, A.L. Mohd (2016) Multiaxial viscoplasticity modelling of power plant steel. Key Engineering Materials, 701 . pp. 230-234. ISSN 1662-9795 Saber, Mohammed and Sun, Wei and Hyde, T.H. (2016) Numerical study of the effects of crack location on creep crack growth in weldment. Engineering Fracture Mechanics, 154 . pp. 72-82. ISSN 0013-7944 Sadeghimeresht, Esmaeil and Markocsan, Nicolaie and Hussain, Tanvir and Huhtakangas, Matti and Joshi, Shrikant (2018) Effect of SiO2 dispersion on chlorine-induced high temperature corrosion of HVAF-sprayed NiCrMo coating. Corrosion . ISSN 0010-9312 Sadeghimeresht, Esmaeil and Reddy, Liam and Hussain, Tanvir and Huhtakangas, Matti and Markocsan, Nicolaie and Joshi, Shrikant (2018) Influence of KCl and HCl on high temperature corrosion of HVAF-sprayed NiCrAlY and NiCrMo coatings. Materials & Design, 148 . pp. 17-29. ISSN 0264-1275 Sadeghimeresht, Esmaeil and Reddy, Liam and Hussain, Tanvir and Markocsan, Nicolaie and Joshi, Shrikant (2018) Chlorine-induced high temperature corrosion of HVAF-sprayed Ni-based alumina and chromia forming coatings. Corrosion Science, 132 . pp. 170-184. ISSN 1879-0496 Said, Rajab and Müller, Sebastian and de Luca, Patrick and Thompson, Adam and El Said, Bassam and Hallett, Stephen and Endruweit, Andreas and Brown, Louise and Long, Andrew and Koncherry, Vivek and Potluri, Prasad (2017) “BAM”: a collaborative R&D project for the development of a simulation based solution for the design and manufacture of 3D woven composites. In: NAFEMS World Congress 2017, 11-14 June 2017, Stockholm, Sweden. Salerno, Gervasio and Bennett, Chris and Sun, Wei and Becker, Adib A. (2016) FE modelling strategies of weld repair in pre-stressed thin components. Journal of Strain Analysis for Engineering Design, 51 (8). pp. 582-597. ISSN 2041-3130 Salerno, Gervasio and Bennett, Chris and Sun, Wei and Becker, Adib A. (2016) Finite element modelling strategies of weld repair in pre-stressed thin components. Journal of Strain Analysis for Engineering Design, 51 (8). pp. 582-597. ISSN 2041-3130 Salerno, Gervasio and Bennett, Chris and Sun, Wei and Becker, Adib A. (2016) Numerical simulation of residual stresses induced by weld repair in a stainless steel pipe considering the influence of an initial fabrication weld. In: 10th International Conference on Residual Stresses (ICRS-10), 3-7 July 2016, Sydney, Australia. (Submitted) Salih, Omar S. and Ou, Hengan and Sun, W. and McCartney, D.G. (2015) A review of friction stir welding of aluminium matrix composites. Materials & Design, 86 . pp. 61-71. ISSN 0264-1275 Sarce Thomann, Fernando and Hall, Matthew R. and Mokaya, Robert and Stevens, Lee A. (2015) Hygrothermal simulation-informed design of mesoporous desiccants for optimised energy efficiency of mixed mode air conditioning systems. Journal of Materials Chemistry A, 3 . pp. 17290-17303. ISSN 2050-7496 Schnädelbach, Holger and Sun, Xu and Kefalidou, Genovefa and Coughlan, Tim and Meese, Rupert and Norris, James and McAuley, Derek (2016) Creativity Greenhouse: at-a-distance collaboration and competition over research funding. International Journal of Human-Computer Studies, 87 . pp. 1-19. ISSN 1071-5819 Senin, Nicola and Moretti, M. and Leach, Richard K. (2017) Shape descriptors and statistical classification on areal topography data for tile inspection in tessellated surfaces. Measurement, 95 . pp. 82-92. ISSN 0263-2241 Senin, Nicola and Thompson, Adam and Leach, Richard K. (2017) Characterisation of the topography of metal additive surface features with different measurement technologies. Measurement Science and Technology, 28 (9). 095003/1-095003/12. ISSN 1361-6501 Shah, Darshil U. and Schubel, Peter J. (2010) Evaluation of cure shrinkage measurement techniques for thermosetting resins. Polymer Testing, 29 (6). pp. 629-639. ISSN 0142-9418 Sharples, Sarah and Shalloe, Sally and Burnett, Gary and Crundall, David (2016) Journey decision making: the influence on drivers of dynamic information presented on variable message signs. Cognition, Technology and Work, 18 (2). pp. 303-317. ISSN 1435-5566 Shayler, Paul J. and Cheng, Li and Li, Qile and Wahab, Emad (2016) A modified oil lubrication system with flow control to reduce crankshaft bearing friction in a litre 4 cylinder diesel engine. In: SAE 2016 World Congress & Exhibition, 12-14 Apr 2016, Detroit, Michigan, USA. Sheppard, D. A. and Paskevicius, M. and Humphries, T. D. and Felderhoff, M. and Capurso, G. and Bellosta von Colbe, J. and Dornheim, M. and Klassen, T. and Ward, P. A. and Teprovich, J. A. and Corgnale, C. and Zidan, R. and Grant, D. M. and Buckley, C. E. (2016) Metal hydrides for concentrating solar thermal power energy storage. Applied Physics A, 122 (4). 395/1-395/15. ISSN 1432-0630 Shi, Shengyu and Lin, Jing and Xu, Xiaoqiang and Feng, Xiaobing and Piano, Samanta (2018) Manufacturing-error-based maintenance for high-precision machine tools. International Journal of Advanced Manufacturing Technology, 95 (1-4). pp. 205-217. ISSN 0268-3768 Siddiq, Abdur R. and Kennedy, Andrew R. (2015) Porous poly-ether ether ketone (PEEK) manufactured by a novel powder route using near-spherical salt bead porogens: characterisation and mechanical properties. Materials Science and Engineering: C, 47 . pp. 180-188. ISSN 0928-4931 Simonelli, Marco and Tse, Y.Y. and Tuck, Christopher (2014) Effect of the build orientation on the mechanical properties and fracture modes of SLM Ti–6Al–4V. Materials Science and Engineering: A, 616 . pp. 1-11. ISSN 0921-5093 Simonelli, Marco and Tuck, Christopher and Aboulkhair, Nesma T. and Maskery, Ian and Ashcroft, Ian and Wildman, Ricky D. and Hague, Richard J.M. (2015) A study on the laser spatter and the oxidation reactions during selective laser melting of 316L stainless steel, Al-Si10-Mg, and Ti-6Al-4V. Metallurgical and Materials Transactions A, 46 (9). pp. 3842-3851. ISSN 1543-1940 Sims-Waterhouse, Danny and Piano, Samanta and Leach, Richard K. (2017) Verification of micro-scale photogrammetry for smooth three-dimensional object measurement. Measurement Science and Technology, 28 (5). 055010. ISSN 1361-6501 Smerdova, Olga and Graham, Richard Stuart and Gasser, Urs and Hutchings, Lian R. and De Focatiis, Davide S.A. (2014) A novel nethod of extraction of blend component structure from SANS measurements of homopolymer bimodal blends. Macromolecular Chemistry and Physics, 215 (9). pp. 859-866. ISSN 1521-3935 Smith, Richard J. and Hirsch, Matthias and Patel, Rikesh and Li, Wenqi and Clare, Adam T. and Sharples, Steve D. (2016) Spatially resolved acoustic spectroscopy for selective laser melting. Journal of Materials Processing Technology, 236 . pp. 93-102. ISSN 0924-0136 Stavroulakis, P.I. and Leach, Richard K. (2016) Review of post-process optical form metrology for industrial-grade metal additive manufactured parts. Review of Scientific Instruments, 87 (4). 041101/1-041101/15. ISSN 1089-7623 Stedmon, Alex and Lawson, Glyn and Lewis, Laura and Richards, Dale and Grant, Rebecca (2015) Human behaviour in emergency situations: comparisons between aviation and rail domains. Security Journal . ISSN 0955-1662 Stieberova, Barbora and Zilka, Miroslav and Ticha, Marie and Freiberg, Frantisek and Caramazana-Gonzalez, Pablo and McKechnie, Jon and Lester, Edward (2017) Application of ZnO nanoparticles in a self-cleaning coating on a metal panel: an assessment of environmental benefits. ACS Sustainable Chemistry and Engineering . ISSN 2168-0485 Stoesslein, M. and Axinte, Dragos A. and Bilbao Guillerna, A. (2016) Pulsed laser ablation as a tool for in-situ balancing of rotating parts. Mechatronics, 38 . pp. 54-67. ISSN 1873-4006 Stoesslein, M. and Axinte, Dragos A. and Gilbert, D. (2016) On-the-fly laser machining: a case study for in situ balancing of rotative parts. Journal of Manufacturing Science and Engineering, 139 (3). 031002. ISSN 1528-8935 Stoppiello, Craig T. and Biskupek, Johannes and Li, Z.Y. and Rance, Graham A. and Botos, Akos and Fogarty, Richard M. and Bourne, Richard A. and Yuan, J. and Lovelock, Kevin and Thompson, P. and Fay, Mike W. and Kaiser, Ute and Chamberlain, Thomas W. and Khlobystov, Andrei N. (2017) A one-pot-one-reactant synthesis of platinum compounds at the nanoscale. Nanoscale, 9 (38). pp. 14385-14394. ISSN 2040-3372 Stuart, Bryan and Gimeno-Fabra, Miquel and Segal, Joel and Ahmed, Ifty and Grant, David M. (2015) Degradation and characterization of resorbable phosphate-based glass thin-film coatings applied by radio-frequency magnetron sputtering. ACS Applied Materials and Interfaces, 7 (49). pp. 27362-27372. ISSN 1944-8252 Sturgess, Craig and Tuck, Christopher and Ashcroft, Ian and Wildman, Ricky D. (2017) 3D reactive inkjet printing of polydimethylsiloxane. Journal of Materials Chemistry C, 5 . pp. 9733-9743. ISSN 2050-7496 Sun, Wei (2018) The role of hardness on condition monitoring and lifing for power plant structure risk management. Measurement, 131 . pp. 501-512. Sun, Wei (2015) Effects of compositions of filler, binder and porosity on elastic and fracture properties of nuclear graphite. Journal of Nuclear Materials, 457 . pp. 42-47. ISSN 0022-3115 Sun, Wei and Choo, Hui Leng (2017) Finite element analysis and experimental study of plastic lattice structures manufactured by selective laser sintering. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 231 (1-2). pp. 171-178. ISSN 2041-3076 Sun, Xu and Golightly, David and Cranwell, Jo and Bedwell, Benjamin D. and Sharples, Sarah (2013) Participant experiences of mobile device-based diary studies. International Journal of Mobile Human Computer Interaction, 5 (2). pp. 62-83. ISSN 1942-3918 TTammisola, Outi and Juniper, M.P. (2016) Coherent structures in a swirl injector at Re=4800 by nonlinear simulations and linear global modes. Journal of Fluid Mechanics, 792 . pp. 620-657. ISSN 1469-7645 Tammisola, Outi and Loiseau, Jean-Christophe and Brandt, Luca (2017) Effect of viscosity ratio on the self-sustained instabilities in planar immiscible jets. Physical Review Fluids, 2 (3). 033903/1-033903/36. ISSN 2469-990X Theis, Julian and Ossmann, Daniel and Thielecke, Frank and Pfifer, Harald (2018) Robust autopilot design for landing a large civil aircraft in crosswind. Control Engineering Practice, 76 . pp. 54-64. ISSN 0967-0661 Thompson, Adam and Körner, Lars and Senin, Nicola and Lawes, Simon and Leach, Richard and Maskery, Ian (2017) X-ray computed tomography of additively manufactured metal parts: the effect of magnification and reconstruction sampling on surface topography measurement. In: 16th Conference on Metrology and properties of Engineering Surfaces, 27-29 June 2017, Göteborg, Sweden. Thompson, Adam and Maskery, Ian and Leach, Richard K. (2016) X-ray computed tomography for additive manufacturing: a review. Measurement Science and Technology, 27 (7). 072001/1-072001/17. ISSN 1361-6501 Thompson, Adam and McNally, Donal and Maskery, Ian and Leach, Richard K. (2017) X-ray computed tomography and additive manufacturing in medicine: a review. International Journal of Metrology and Quality Engineering, 8 . 17/1-17/15. ISSN 2107-6847 Tobi, A.L. Mohd and Sun, Wei and Shipway, P.H. (2016) Investigation on the plasticity accumulation of Ti-6Al-4V fretting wear by decoupling the effects of wear and surface profile in finite element modelling. Tribology International . ISSN 1879-2464 Todhunter, Luke D. and Leach, Richard and Lawes, Simon D.A. (2017) An industrial survey on the use of surface texture parameters. In: 16th Conference on Metrology and properties of Engineering Surfaces, 27-29 June 2017, Göteborg, Sweden. Torrubia, P. Lozano and Billingham, John and Axinte, Dragos A. (2016) Stochastic simplified modelling of abrasive waterjet footprints. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 472 (2186). pp. 1-22. ISSN 1471-2946 Trinder, Martin and Jabbal, Mark (2013) Development of a smoke visualisation system for wind tunnel laboratory experiments. International Journal of Mechanial Engineering Education, 41 (1). pp. 27-43. ISSN 2050-4586 Tu, Shan-Tung and Zhuang, Fa-Kun and Zhou, Guo-Yan and Sun, Wei (2016) Effect of large deformation on creep property evaluation by small-specimen bending tests. International Journal of Pressure Vessels and Piping, 139-140 . pp. 194-203. ISSN 0308-0161 Turner, Paul and Liu, Tao and Zeng, Xuesen (2016) Collapse of 3D orthogonal woven carbon fibre composites under in-plane tension/compression and out-of-plane bending composite structures. Composite Structures . ISSN 1879-1085 VVafamehr, Hassan and Cairns, Alasdair and Sampson, Ojon and Mohammadmohsen Moslemin, Koupaie (2016) The competing chemical and physical effects of transient fuel enrichment on heavy knock in an optical spark ignition engine. Applied Energy, 179 . pp. 687-697. ISSN 0306-2619 Vaithilingam, Jayasheelan and Goodridge, Ruth D. and Hague, Richard J.M. and Christie, Steven D.R. and Edmondson, Steve (2016) The effect of laser remelting on the surface chemistry of Ti6al4V components fabricated by selective laser melting. Journal of Materials Processing Technology, 232 . pp. 1-8. ISSN 0924-0136 Vaithilingam, Jayasheelan and Kilsby, Samuel and Goodridge, Ruth D. and Christie, Steven D.R. and Edmondson, Steve and Hague, Richard J.M. (2015) Functionalisation of Ti6Al4V components fabricated using selective laser melting with a bioactive compound. Materials Science and Engineering: C, 46 . pp. 52-61. ISSN 0928-4931 Vaithilingam, Jayasheelan and Saleh, Ehab and Körner, Lars and Wildman, Ricky D. and Hague, Richard J.M. and Leach, Richard K. and Tuck, Christopher J. (2018) 3-dimensional inkjet printing of macro structures from silver nanoparticles. Materials & Design, 139 . pp. 81-88. ISSN 0264-1275 Vasques, Joao and Cherdantsev, Andrey V. and Cherdantsev, Mikhail and Isaenkov, Sergey and Hann, David B. (2018) Comparison of disturbance wave parameters with flow orientation in vertical annular gas-liquid flows in a small pipe. Experimental Thermal and Fluid Science, 97 . pp. 484-501. ISSN 0894-1777 Vinod Kumar, G.S. and García-Moreno, Francisco and Banhart, John and Kennedy, Andrew R. (2015) The stabilising effect of oxides in foamed aluminium alloy scrap. International Journal of Materials Research, 106 (9). pp. 978-987. ISSN 1862-5282 Vladov, Nikola and Ratchev, Svetan and Segal, Joel (2011) Focused ion beam milling of brass for microinjection mould fabrication. In: International Conference on Micromanufacturing (ICOMM 2011), 7-10 March 2011, Tokyo, Japan. Vladov, Nikola and Segal, Joel and Ratchev, Svetan (2015) Apparent beam size definition of focused ion beams based on scanning electron microscopy images of nanodots. Journal of Vacuum Science & Technology B, 33 . 041803/1-041803/6. ISSN 1071-1023 WWadsworth, M. and Kyaw, Si Thu and Sun, Wei (2014) Finite element modelling of the effect of temperature and neutron dose on the fracture behaviour of nuclear reactor graphite bricks. Nuclear Engineering and Design, 280 . pp. 1-7. ISSN 0029-5493 Walker, David and Barham, Scott and Giddings, Donald and Dimitrakis, Georgios (2018) Wet steam measurement techniques. Reviews in Chemical Engineering . ISSN 0167-8299 Wang, Jing and Xu, Fang and Wheatley, R.J. and Neate, Nigel C. and Hou, Xianghui (2016) Yb3+ doping effects on thermal conductivity and thermal expansion of Yttrium aluminium garnet. Ceramics International, 42 (12). pp. 14228-14235. ISSN 1873-3956 (In Press) Wang, Jing and Xu, Fang and Wheatley, Richard J. and Choy, Kwang-Leong and Neate, Nigel C. and Hou, Xianghui (2015) Investigation of La3+ Doped Yb2Sn2O7 as new thermal barrier materials. Materials & Design, 85 . pp. 423-430. ISSN 0261-3069 Wang, Mingfeng and Palmer, David and Dong, Xin and Alatorre, David and Axinte, Dragos A. and Norton, Andy (2018) Design and development of a slender dual-structure continuum robot for in-situ aeroengine repair. Proceedings of the ... IEEE/RSJ International Conference on Intelligent Robots and Systems. IEEE/RSJ International Conference on Intelligent Robots and Systems . ISSN 2153-0858 (In Press) Wang, Mingqing and Hou, Xianghui and Liu, Junpeng and Choy, KwangLeong and Gibson, Paul and Salem, Elhamali and Koutsogeorgis, Demosthenes and Cranton, Wayne (2015) An alternative non-vacuum and low cost ESAVD method for the deposition of Cu(In,Ga)Se2 absorber layers. Physica Status Solidi A: Applied Research, 212 . pp. 72-75. ISSN 0031-8965 Wang, Y. and Wang, Z.-J. and Gindy, Nabil (2011) A method for representation of component geometry using discrete pin for reconfigurable moulds. Advances in Engineering Software, 42 (7). pp. 409-418. ISSN 1873-5339 Wang, Zi and Anobile, Alessandro and Popov, Atanas A. (2017) Time-domain aeroelastic model for compound helicopter propeller-wing configuration. In: Aerospace Europe CEAS 2017 Conference, 16-20 October 2017, Bucharest, Romania. Wang, Zi and Anobile, Alessandro and Popov, Atanas A. (2017) Efficient numerical methods for aeroelastic analysis of wing-propeller configuration compound helicopters. In: Italian Association of Aeronautics and Astronautics XXIV International Conference, 18-22 September 2017, Palermo & Enna Italy. (Submitted) Wang, Zi and Popov, Atanas A. (2018) Computationally-efficient aeroelastic analysis tool for short-wing/propeller configuration on compound helicopters. In: International Conference on Noise and Vibration Engineering (ISMA-USD 2018), 17-19 September 2018, Leuven, Belgium. Waterson, Patrick E. and Kendrick, Victoria L. and Ryan, Brendan and Jun, Thomas and Haslam, Roger A. (2016) Probing deeper into the risks of slips, trips and falls for an ageing rail passenger population: applying a systems approach. IET Intelligent Transport Systems, 10 (1). pp. 25-31. ISSN 1751-9578 Wattis, Jonathan A.D. and McCartney, D. Graham and Gudmundsson, Throstur (2004) Coagulation equations with mass loss. Journal of Engineering Mathematics, 49 . pp. 113-131. ISSN 0022-0833 Wei, X. and Qi, L. and Ju, L. and Tian, W. and Hou, X. and Li, H. (2016) Effect of holding pressure on densification and mechanical properties of Cf/Mg composites. Materials Science and Technology, 33 (5). pp. 629-634. ISSN 1743-2847 Wu, Jianwei and Bin, Deer and Feng, Xiaobing and Wen, Zhongpu and Zhang, Yin (2018) GA based adaptive singularity-robust path planning of space robot for on-orbit detection. Complexity, 2018 . p. 370291. ISSN 1076-2787 XXiao, Xueliang and Endruweit, Andreas and Zeng, Xuesen and Hu, Jinlian and Long, Andrew C. (2015) Through-thickness permeability study of orthogonal and angle-interlock woven fabrics. Journal of Materials Science, 50 (3). pp. 1257-1266. ISSN 1573-4803 Xu, Jie and Wu, Tao and Sun, Wei and Peng, Chuang (2017) Characterization on insulation performance, poststability, and foaming process of rigid polyurethane sandwich panel for cold storage warehouse. Journal of Materials in Civil Engineering, 29 (9). 04017138. ISSN 1943-5533 Xu, Jie and Wu, Tao and Sun, Wei and Peng, Chuang (2017) Generalization and modelling of rigid polyisocyanurate foam reaction kinetics, structural units effect, and cell configuration mechanism. Cellular Polymers, 36 (6). pp. 285-312. ISSN 0262-4893 Xu, Jie and Wu, Tao and Zhang, Jianwei and Chen, Hao and Sun, Wei and Peng, Chuang (2017) Microstructure measurement and microgeometric packing characterization of rigid polyurethane foam defects. Cellular Polymers, 36 (4). pp. 183-204. ISSN 0262-4893 Xu, Lei and Zhang, Shu-Yan and Sun, Wei and McCartney, David G. and Hyde, Thomas H. and James, Jon and Drakopoulos, Michael (2015) Residual stress distribution in a Ti-6Al-4V T-joint weld measured using synchrotron X-ray diffraction. The Journal of Strain Analysis for Engineering Design, 50 (7). pp. 445-454. ISSN 0309-3247 Xu, Zhengkai and Hyde, C.J. and Tuck, C. and Clare, A.T. (2018) Creep behaviour of inconel 718 processed by laser powder bed fusion. Journal of Materials Processing Technology, 256 . pp. 13-24. ISSN 0924-0136 Xu, Zhengkai and Hyde, Christopher J. and Thompson, Adam and Leach, Richard K. and Maskery, Ian and Tuck, Christopher and Clare, Adam T. (2017) Staged thermomechanical testing of nickel superalloys produced by selective laser melting. Materials & Design, 133 . pp. 520-527. ISSN 0264-1275 YYang, Bo and Chen, Sheng (2018) Simulation of interaction between a freely moving solid particle and a freely moving liquid droplet by lattice Boltzmann method. International Journal of Heat and Mass Transfer, 127 . pp. 474-484. ISSN 0017-9310 Yang, Bo and Chen, Sheng and Xiong, Yan and Zhang, Rui and Zheng, Chuguang (2017) Size and thermal effects on sedimentation behaviors of two spheres. International Journal of Heat and Mass Transfer, 114 . pp. 198-206. ISSN 0017-9310 Yang, L.-T. and Li, X. and Yu, Hai-Sui and Wanatowski, D. (2016) A laboratory study of anisotropic geomaterials incorporating recent micromechanical understanding. Acta Geotechnica, 11 (5). pp. 1111-1129. ISSN 1861-1133 Yazdani, Bahareh and Xu, Fang and Ahmad, Iftikhar and Hou, Xianghui and Xia, Yongde and Zhu, Yanqiu (2015) Tribological performance of Graphene/Carbon nanotube hybrid reinforced Al2O3 composites. Scientific Reports, 5 (11579). ISSN 2045-2322 Yue, Thomas and Pearce, Frazer and Kruisbrink, Arno and Morvan, Herve (2015) Numerical simulation of two-dimensional Kelvin-Helmholtz instability using weakly compressible smoothed particle hydrodynamics. International Journal for Numerical Methods in Fluids, 78 (5). pp. 283-303. ISSN 1097-0363 ZZannotti, Marco and Wood, Christopher J. and Summers, Gareth H. and Stevens, Lee A. and Hall, Matthew R. and Snape, Colin E. and Giovannetti, Rita and Gibson, Elizabeth A. (2015) Ni Mg mixed metal oxides for p-type dye-sensitized solar cells. ACS Applied Materials and Interfaces, 7 (44). pp. 24556-24565. ISSN 1944-8252 Zeng, Xuesen and Brown, Louise P. and Endruweit, Andreas and Long, Andrew C. (2012) Advanced geometry modelling of 3D woven reinforcements in polymer composites: processing and performance analysis. In: Fourth World Conference on 3D Fabrics and their Applications, 10-11 Sep 2012, Aachen, Germany. Zeng, Xuesen and Long, Andew C.A. and Ashcroft, Ian and Potluri, Prasad (2015) Fibre architecture design of 3D woven composite with genetic algorithms: a unit cell based optimisation framework and performance assessment. In: 20th International Conference on Composite Materials, 19-24 July 2015, Copenhagen, Denmark. Zeng, Xuesen and Schubel, Peter J. and Lorrillard, Julien (2016) Modelling VARTM process induced variations on bending performance of composite Omega beams. Composites Part A: Applied Science and Manufacturing, 90 . pp. 371-379. ISSN 1359-835X Zhang, Deen and Harris, S. J. and McCartney, D.G. and Pashby, I.R. and Powell, J. and Shipway, P.H. and Voisey, K.T. (2008) The effect of laser transformation notching on the controlled fracture of a high carbon (C70S6 ) steel. Materials Science and Engineering: A, 489 (1-2). pp. 273-284. ISSN 0921-5093 Zhang, Fan and Saleh, Ehab and Vaithilingam, Jayasheelan and Li, You and Tuck, Christopher and Hague, Richard and Wildman, Ricky and He, Yinfeng (2019) Reactive material jetting of polyimide insulators for complex circuit board design. Additive Manufacturing, 25 . pp. 477-484. Zhang, Fan and Tuck, Christopher and Hague, Richard J.M. and He, Yinfeng and Saleh, Ehab and Li, You and Sturgess, Craig and Wildman, Ricky D. (2016) Inkjet printing of polyimide insulators for the 3D printing of dielectric materials for microelectronic applications. Journal of Applied Polymer Science (43361). ISSN 1097-4628 Zhang, M. H. and Lu, B. and Chen, J. and Long, H. and Ou, H. (2015) Selective element fission approach for fast FEM simulation of incremental sheet forming based on dual-mesh system. The International Journal of Advanced Manufacturing Technology, 78 (5-8). pp. 1147-1160. ISSN 0268-3768 Zhu, Chenkai and Ahmed, Ifty and Parsons, Andrew J. and Wang, Yunqi and Tan, Chao and Liu, Jingsong and Rudd, Chris D. and Liu, Xiaoling (2018) Novel bioresorbable phosphate glass fiber textile composites for medical applications. Polymer Composites, 39 (S1). E140-E151. ISSN 1548-0569 Ziegelmeier, Stefan and Christou, Panagiotis and Wöllecke, Frank and Tuck, Christopher and Goodridge, Ruth D. and Hague, Richard J.M. and Krampe, Erhard and Wintermantel, Erich (2015) An experimental study into the effects of bulk and flow behaviour of laser sintering polymer powders on resulting part properties. Journal of Materials Processing Technology, 215 . pp. 239-250. ISSN 0924-0136 |