Items where Division is "University of Nottingham, UK > Faculty of Engineering"

Schools and Departments (2856)
- University of Nottingham, UK (2856)
  - Faculty of Engineering (2856)
    - Department of Architecture and Built Environment (225)
    - Department of Chemical and Environmental Engineering (169)
    - Department of Civil Engineering (263)
    - Department of Electrical and Electronic Engineering (699)
    - Department of Mechanical, Materials and Manufacturing Engineering (430)

Group by: Creators | Item Type | Date | No Grouping

Number of items at this level: 1117.

Abayzeed, Sidahmed, Smith, Richard J., See, Chung W. and Somekh, Michael G. (2018) Analysis of noise in differential and ratiometric biosensing systems. Sensors and Actuators B: Chemical, 260 . pp. 1059-1067. ISSN 0925-4005

Abayzeed, Sidahmed A., Smith, Richard J., Webb, Kevin F., Somekh, Michael G. and See, Chung W. (2017) Sensitive detection of voltage transients using differential intensity surface plasmon resonance system. Optics Express, 25 (25). pp. 31552-31567. ISSN 1094-4087

Abayzeed, Sidahmed A., Smith, Richard J., Webb, Kevin F., Somekh, Michael G. and See, Chung W. (2016) Responsivity of the differential-intensity surface plasmon resonance instrument. Sensors and Actuators B: Chemical, 235 . pp. 627-635. ISSN 1054-6693

Abdelatif, Amged O. (2012) www.sudacon.net for construction news in Sudan. sudacon.

Abdelatif, Amged O., Owen, John S. and Hussein, Mohammed F.M. (2015) Modelling the prestress transfer in pre-tensioned concrete elements. Finite Elements in Analysis and Design, 94 . pp. 47-63. ISSN 0168-874X

Abdelatif, Amged O., Owen, John S. and Hussein, Mohammed F.M. (2012) Modeling the re-anchoring of a ruptured tendon in bonded post-tensioned concrete. In: Bond in Concrete 2012 – General Aspects of Bond, 2012, Italy.

Abdi, Meisam, Ashcroft, Ian and Wildman, Ricky (2018) Topology optimization of geometrically nonlinear structures using an evolutionary optimization method. Engineering Optimization . ISSN 1029-0273

Abdi, Meisam, Ashcroft, Ian and Wildman, Ricky D. (2018) Design optimization for an additively manufactured automotive component. International Journal of Powertrains, 7 (1-3). pp. 142-161. ISSN 1742-4275

Abdi, Meisam, Wildman, Ricky and Ashcroft, Ian (2014) Evolutionary topology optimization using the extended finite element method and isolines. Engineering Optimization, 46 (5). pp. 628-647. ISSN 1029-0273

Abdulkadir, M., Hernandez-Perez, V., Lowndes, I.S., Azzopardi, B.J. and Sam-Mbomah, E. (2016) Experimental study of the hydrodynamic behaviour of slug flow in a horizontal pipe. Chemical Engineering Science, 156 . pp. 147-161. ISSN 0009-2509

Abdulrahim, Khairi, Hide, Chris, Moore, Terry and Hill, Chris (2014) Rotating a mens inertial measurement unit for a foot-mounted pedestrian navigation. Journal of Computer Science, 10 (12). pp. 2619-2627. ISSN 1549-3636

Abdulrahim, Khairi, Hide, Christopher, Moore, Terry and Hill, Chris (2014) Increased error observability of an inertial pedestrian navigation system by rotating IMU. Journal of Engineering and Technological Sciences, 46 (2). pp. 211-225. ISSN 2337-5779

Abdulrahim, Khairi, Moore, Terry, Hide, Christopher and Hill, Chris (2014) Understanding the performance of zero velocity updates in MEMS-based pedestrian navigation. International Journal of Advancements in Technology, 5 (2). pp. 53-60. ISSN 0976-4860

Abdulrahim, Khairi, Seman, K., Othman, M, Md Shuib, F. M., Moore, Terry, Hide, Christopher and Hill, Chris (2014) On magnetometer heading updates for inertial pedestrian navigation system. Gyroscopy and Navigation, 5 (3). pp. 145-152. ISSN 2075-1087

Abed, Ahmed, Thom, Nicholas and Lo Presti, Davide (2018) Design considerations of high RAP-content asphalt produced at reduced temperatures. Materials and Structures, 51 (4). 91/1-91/16. ISSN 1871-6873

Aboufoul, M. and Garcia, Alvaro (2017) Factors affecting hydraulic conductivity of asphalt mixture. Materials and Structures, 50 (116). pp. 1-16. ISSN 1871-6873

Aboulkhair, Nesma T., Everitt, Nicola M., Ashcroft, Ian and Tuck, Christopher (2014) Reducing porosity in AlSi10Mg parts processed by selective laser melting. Additive Manufacturing, 1-4 . pp. 77-86. ISSN 2214-8604

Aboulkhair, Nesma T., Everitt, Nicola M., Maskery, Ian, Ashcroft, Ian and Tuck, Chris (2017) Selective laser melting of aluminium alloys. MRS Bulletin, 42 (4). pp. 311-319. ISSN 1938-1425

Aboulkhair, Nesma T., Maskery, Ian, Tuck, Christopher, Ashcroft, Ian and Everitt, Nicola M. (2016) Improving the fatigue behaviour of a selectively laser melted aluminium alloy: influence of heat treatment and surface quality. Materials & Design, 104 . pp. 174-182. ISSN 0264-1275

Aboulkhair, Nesma T., Maskery, Ian, Tuck, Christopher, Ashcroft, Ian and Everitt, Nicola M. (2016) The microstructure and mechanical properties of selectively laser melted AlSi10Mg: The effect of a conventional T6-like heat treatment. Materials Science and Engineering: A, 667 . pp. 139-146. ISSN 0921-5093

Aboulkhair, Nesma T., Maskery, Ian, Tuck, Christopher, Ashcroft, Ian and Everitt, Nicola M. (2016) On the formation of AlSi10Mg single tracks and layers in selective laser melting: microstructure and nano-mechanical properties. Journal of Materials Processing Technology, 230 . pp. 88-98. ISSN 0924-0136

Aboulkhair, Nesma T., Tuck, Christopher, Ashcroft, Ian, Maskery, Ian and Everitt, Nicola M. (2015) On the precipitation hardening of selective laser melted AlSi10Mg. Metallurgical and Materials Transactions A, 46 (8). pp. 3337-3341. ISSN 1073-5623

Aboulkhair, Nesma T., Tuck, Christopher, Maskery, Ian, Ashcroft, Ian and Everitt, Nicola (2015) Nano-hardness and microstructure of selective laser melted AlSi10Mg scan tracks. In: Industrial Laser Applications Symposium (ILAS 2015), 17-18 March 2015, Kenilworth, UK.

Adam, Mohamed, Beneroso, Daniel, Katrib, Juliano, Kingman, Sam and Robinson, John P. (2017) Microwave fluidized bed for biomass pyrolysis. Part II: Effect of process parameters. Biofuels, Bioproducts and Biorefining . ISSN 1932-1031

Adam, Mohamed, Beneroso, Daniel, Katrib, Juliano, Kingman, Sam and Robinson, John P. (2017) Microwave fluidized bed for biomass pyrolysis. Part I: Process design. Biofuels, Bioproducts and Biorefining . ISSN 1932-1031

Adam, Mohamed, Hart, Abarasi, Stevens, Lee A., Wood, Joseph, Robinson, John P. and Rigby, Sean P. (2018) Microwave synthesis of carbon onions in fractal aggregates using heavy oil as a precursor. Carbon, 138 . pp. 427-435. ISSN 0008-6223

Adbulkadir, M., Azzi, A., Zhao, D. and Azzopardi, Barry J. (2014) Liquid film thickness behaviour within a large diameter vertical 180° return bend. Chemical Engineering Science, 107 . pp. 137-148. ISSN 1873-4405

Agunlejika, Ezekiel O., Langston, Paul A., Azzopardi, Barry J. and Hewakandamby, Buddhika N. (2016) Subatmospheric boiling study of the operation of a horizontal thermosyphon reboiler loop: Instability. Applied Thermal Engineering, 109 (A). pp. 739-745. ISSN 1873-5606

Ahmad, Junaid, Jayet, Baptiste, Hill, Philip J., Mather, Melissa L., Dehghani, Hamid and Morgan, Stephen P. (2018) Ultrasound-mediation of self-illuminating reporters improves imaging resolution in optically scattering media. Biomedical Optics Express, 9 (4). pp. 1664-1679. ISSN 2156-7085

Ahmadpoor, Negar and Heath, Tim (2015) The image of the city in the information era. In: 3rd International Biennial Conference, 17-19 September 2015, Athens, Greece.

Ahmed, N., Bakare, M.S., McCartney, D.G. and Voisey, K.T. (2010) The effects of microstructural features on the performance gap in corrosion resistance between bulk and HVOF sprayed Inconel 625. Surface and Coatings Technology, 204 (14). pp. 2294-2301. ISSN 0257-8972

Ahmed, N., Voisey, K.T. and McCartney, D.G. (2010) Investigation into the effect of beam shape on melt pool characteristics using analytical modelling. Optics and Lasers in Engineering, 48 . pp. 548-554. ISSN 0143-8166

Airey, G. D., Grenfell, J. R. A., Apeagyei, A., Subhy, A. and Lo Presti, D. (2016) Time dependent viscoelastic rheological response of pure, modified and synthetic bituminous binders. Mechanics of Time-Dependent Materials, 20 (3). pp. 455-480. ISSN 1385-2000

Airey, G.D. and Collop, A.C. (2014) Mechanical and structural assessment of laboratory- and field-compacted asphalt mixtures. International Journal of Pavement Engineering, 17 (1). pp. 50-63. ISSN 1477-268X

Ajayi, O.M, Everitt, N.M. and Voisey, K.T. (2016) Evaluation of inulin and aloe vera as green corrosion inhibitors for mild steel in 15% HCl. In: European Federation of Corrosion Congress (Eurocorr 2016), 11-15 September 2016, Montpellier, France.

Ajayi, Olorunfemi, Everitt, Nicola and Voisey, K.T. (2017) Corrosion inhibition of mild steel in 15 wt.% HCl by durum wheat. In: European Corrosion Congress 2017 (Eurocorr 2017), 3-7 September 2017, Prague, Czech Republic. (Submitted)

Al-Fadhli, Mohammed, McNally, Donal and Branson, David T. (2016) Achieving powered assisted motion of the trunk without an articulated exoskeleton. In: 22nd Congress of the European Society of Biomechanics (ESB 2016), 10-13 July 2016, Lyon, France. (Unpublished)

Al-Harahsheh, Mohammad, Al-Otoom, Awni, Al-Jarrah, Muhannad, Altarawneh, Mohammednoor and Kingman, Sam (2017) Thermal analysis on the pyrolysis of tetrabromobisphenol A (TBBPA) and Electric Arc Furnace Dust mixtures. Metallurgical and Materials Transactions B, 49 (1). pp. 45-60. ISSN 1073-5615

Al-Harahsheh, Mohammad, Kingman, S.W. and Hamilton, Ian S. (2017) Microwave treatment of electric arc furnace dust with Tetrabromobisphenol A: Dielectric characterization and pyrolysis-leaching. Journal of Analytical and Applied Pyrolysis, 128 . pp. 168-175. ISSN 0165-2370

Al-Mashikhi, S.O., Powell, J., Kaplan, A.F.H. and Voisey, K.T. (2011) Heat affected zones and oxidation marks in fiber laser-oxygen cutting of mild steel. Journal of Laser Applications, 23 (4). 042003-1-042003-7. ISSN 1042-346X

Al-Owaisi, Sultan, Becker, Adib A., Sun, Wei, Al-Shabibi, Abdullah, Al-Moharbi, Majid, Pervez, Tasneem and Al-Salmi, Hussain (2018) An experimental investigation of the effect of defect shape and orientation on the burst pressure of pressurised pipes. Engineering Failure Analysis . ISSN 1350-6307 (In Press)

Alburayt, Anas, Syam, Wahyudin P. and Leach, Richard (2018) Lateral scale calibration for focus variation microscopy. Measurement Science and Technology, 29 (6). 065012. ISSN 1361-6501

Algodi, Samer J., Murray, James W., Fay, Michael W., Clare, Adam T. and Brown, Paul D. (2016) Electrical discharge coating of nanostructured TiC-Fe cermets on 304 stainless steel. Surface and Coatings Technology, 307 (Part A). pp. 639-649. ISSN 1879-3347

Ali, Jasim M., Marsh, Stuart and Smith, Martin J. (2017) A comparison between London and Baghdad surface urban heat islands and possible engineering mitigation solutions. Sustainable Cities and Society, 29 . pp. 159-168. ISSN 2210-6707

Aliyu, Attahir Murtala and Castellazzi, Alberto (2017) Measuring structure functions of power devices in inverters. Microelectronics Reliability . ISSN 0026-2714

Almeida, Trevor P., Kasama, Takeshi, Muxworthy, Adrian R., Williams, Wyn, Nagy, Lesleis, Hansen, Thomas W. and Dunin-Borkowski, Rafal E. (2014) Visualized effect of oxidation on magnetic recording fidelity in pseudo-single-domain magnetite particles. Nature Communications, 5 (5154). pp. 1-6. ISSN 2041-1723

Almeida, Trevor P., Muxworthy, Adrian R., Kovacs, Andras, Williams, Wyn, Brown, Paul D. and Dunin-Borkowski, Rafal E. (2016) Direct visualization of the thermomagnetic behavior of pseudo-single-domain magnetite particles. Science Advances, 2 (4). e1501801. ISSN 2375-2548

Alotaibi, M., Atiyah, H., MacKenzie, R.C.I. and Voisey, K.T. (2017) Application of ray-tracing to interpreting beam prints from fibre laser cutting. Lasers in Engineering, 39 (1-2). pp. 3-16. ISSN 1029-029X

Alsaady, Mustafa, Fu, Rong, Liu, Zeyu, Yan, Yuying, Wu, Shenyi and Boukhanouf, Rabah (2018) An experimental investigation on the effect of ferrofluids on the efficiency of novel parabolic trough solar collector under laminar flow conditions. Heat Transfer Engineering . ISSN 0145-7632 (In Press)

Alshammari, Lubna, Large, David, Boyd, Doreen S., Sowter, Andrew, Anderson, Russell, Andersen, Roxane and Marsh, Stuart (2018) Long-term peatland condition assessment via surface motion monitoring using the ISBAS DInSAR technique over the Flow Country, Scotland. Remote Sensing, 10 (7). 1103/1-1103/24. ISSN 2072-4292

Alsuraykh, Norah H., Maior, Horia A., Wilson, Max L., Tennent, Paul and Sharples, Sarah (2018) How stress affects functional near-infrared spectroscopy (fNIRS) measurements of mental workload. In: CHI 2018: ACM SIGCHI Conference on Human Factors in Computing Systems (Extended Abstracts), 21-26 April 2018, Montreal, Canada. (In Press)

Altomonte, Sergio, Logan, Brian, Feisst, Markus, Rutherford, Peter and Wilson, Robin (2016) Interactive and situated learning in education for sustainability. International Journal of Sustainability in Higher Education, 17 (3). pp. 417-443. ISSN 1467-6370

Altomonte, Sergio, Rutherford, Peter and Wilson, Robin (2014) Mapping the way forward: education for sustainability in architecture and urban design. Corporate Social Responsibility and Environmental Management, 21 (3). pp. 143-154. ISSN 1535-3966

Altomonte, Sergio, Saadouni, Sara and Schiavon, Stefano (2016) Occupant satisfaction in LEED and BREEAM-certified office buildings. In: 36th International Conference on Passive and Low Energy Architecture. Cities, Buildings, People: Towards Regenerative Environments (PLEA 2016), 11-13 July 2016, Los Angeles, USA.

Amami, M.M., Smith, M.J. and Kokkas, N. (2014) Low cost vision based personal mobile mapping system. ISPRS - International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, XL-3/W1 . pp. 1-6. ISSN 2194-9034

Amankwah, Emmanuel K., Watson, A.J., Wheeler, Patrick and Clare, Jon C. (2015) Control of a hybrid modular multilevel converter during grid voltage unbalance. In: 11th International Conference on AC and DC Power Transmission, 10-12 Feb 2015, Birmingham, UK.

Ambrose, S., Hargreaves, David and Lowndes, Ian (2016) Numerical modeling of oscillating Taylor bubbles. Engineering Applications of Computational Fluid Mechanics, 10 (1). pp. 580-600. ISSN 1997-003X

Ambrose, Stephen, Lowndes, Ian S., Hargreaves, David and Azzopardi, Barry (2017) Numerical modelling of the rise of Taylor bubbles through a change in pipe diameter. Computers and Fluids, 148 . pp. 10-25. ISSN 1879-0747

Amirian, Pouria, Basiri, Anahid and Morley, Jeremy (2016) Predictive analytics for enhancing travel time estimation in navigation apps of Apple, Google, and Microsoft. In: 9th ACM SIGSPATIAL International Workshop on Computational Transportation Science, 31 October - 3 November 2016, Burlingame, California, USA.

Amirian, Pouria, Basiri, Anahid, Van Loggerenberg, Francois, Moore, Terry, Lang, Trudie and Varga, Margaret (2015) Intersection of geospatial big data, geocomputation and cloud computing. In: ICA European Symposium on Cartography (EuroCarto2015), 10-12 November 2015, Vienna, Austria.

Ammar, Muhammad, Aquino, Marcio, Vadakke Veettil, Sreeja and Andreotti, Marcus (2018) Estimation and analysis of multi-GNSS differential code biases using a hardware signal simulator. GPS Solutions, 22 . 32/1-32/12. ISSN 1521-1886

Amos, Mary and Lawson, Glyn (2017) User-centred design of a portable fire extinguisher. Ergonomics in Design, 25 (3). pp. 20-27. ISSN 1064-8046

Ampatzidis, Theofanis and Chronopoulos, Dimitrios (2017) Examination of acoustic insulation of composite metamaterials with negative stiffness elements inclusions. In: 24th International Conference on Sound and Vibration, 23-27 July 2017, London, UK.

Ampatzidis, Theofanis and Chronopoulos, Dimitrios (2017) Parametric study of control of frequency banded behaviour of periodic pressurised composite structures. In: 24th International Congress on Sound and Vibration, 23-27 July 2017, London, UK.

Ampatzidis, Theofanis and Chronopoulos, Dimitrios (2016) Wave propagation in pressurised composite structures with frequency band gap behaviour. In: 2016 Leuven Conference on Noise and Vibration Engineering, 19-21 September 2016, Leuven, Belgium.

Ampatzidis, Theofanis and Chronopoulos, Dimitrios (2016) Acoustic transmission properties of pressurised and pre-stressed composite structures. Composite Structures . pp. 1-49. ISSN 1879-1085

Ampatzidis, Theofanis, Leach, Richard K., Tuck, Christopher and Chronopoulos, Dimitrios (2018) Band gap behavior of optimal one-dimensional composite structures with an additive manufactured stiffener. Composites Part B: Engineering, 153 . pp. 26-35. ISSN 1359-8368

Andrews, John, Bohm, Thomas, Dersin, Pierre, Groos, Jorn C. and Schenkendorf, Rene (2018) Editorial special issue: PHM for railway systems and mass transportation. International Journal of Prognostics and Health Management, 8 (Sp7). 061/1-061/4. ISSN 2153-2648

Andrews, John and Fecarotti, Claudia (2017) System design and maintenance modelling for safety in extended life operation. Reliability Engineering & System Safety, 163 . pp. 95-108. ISSN 0951-8320

Andrews, John, Prescott, Darren and De Rozières, Florian (2014) A stochastic model for railway track asset management. Reliability Engineering and System Safety, 130 . pp. 76-84. ISSN 0951-8320

Antoniadis, I., Chatzi, E., Chronopoulos, Dimitrios, Paradeisiotis, A., Sapountzakis, I. and Konstantopoulos, S. (2017) Low-frequency wide band-gap elastic/acoustic metamaterials using the K-damping concept. Arxiv . (Unpublished)

Antzoulatos, Nikolas, Castro, Elkin, de Silva, Lavindra, Rocha, André Dionisio, Ratchev, Svetan and Barata, José (2016) A multi-agent framework for capability-based reconfiguration of industrial assembly systems. International Journal of Production Research . ISSN 0020-7543

Aremu, Adedeji, Brennan-Craddock, J.P.J., Panesar, Ajit, Ashcroft, Ian, Hague, Richard J.M., Wildman, Ricky D. and Tuck, Christopher (2016) A voxel-based method of constructing and skinning conformal and functionally graded lattice structures suitable for additive manufacturing. Additive Manufacturing, 13 . pp. 1-13. ISSN 2214-8604

Argyle, Elizabeth M., Gourley, Jonathan J., Flamig, Zachary L., Hansen, Tracy and Manross, Kevin (2017) Toward a user-centered design of a weather forecasting decision-support tool. Bulletin of the American Meteorological Society, 98 (2). pp. 373-382. ISSN 0003-0007

Argyle, Elizabeth M., Gourley, Jonathan J., Ling, Chen, Shehab, Randa L. and Kang, Ziho (2017) Effects of display design on signal detection in flash flood forecasting. International Journal of Human-Computer Studies, 99 . pp. 48-56. ISSN 1071-5819

Athanasiou, Giorgos S., Ernst, Johanna, Furniss, David, Benson, Trevor M., Chauhan, Jasbinder, Middleton, John, Parmenter, Christopher D.J., Fay, Mike W., Neate, Nigel C., Shiryaev, Vladimir, Churbanov, Mikhail F. and Seddon, Angela B. (2016) Toward mid-infrared, subdiffraction, spectral-mapping of human cells and tissue: SNIM (scanning near-field infrared microscopy) tip fabrication. Journal of Lightwave Technology, 34 (4). 1212 -1219. ISSN 1558-2213

Atiyah, H., Powell, J., Petring, D., Stoyanov, S. and Voisey, K.T. (2018) Fibre laser cutting: the use of carbon-filled acrylic as a qualitative and quantitative analysis tool. Journal of Laser Applications, 30 (3). 032009/1-032009/8. ISSN 1938-1387

Aydin, Devrim, Casey, Sean P., Chen, Xiangjie and Riffat, Saffa (2018) Numerical and experimental analysis of a novel heat pump driven sorption storage heater. Applied Energy, 211 . pp. 954-974. ISSN 0306-2619

Ayegba, P.O., Abdulkadir, M., Hernandez-Perez, V., Lowndes, Ian and Azzopardi, Barry J. (2017) Applications of Artificial Neural Network (ANN) method for performance prediction of the effect of a vertical 90° bend on an air-silicone oil flow. Journal of the Taiwan Institute of Chemical Engineers, 74 . pp. 59-64. ISSN 1876-1070

Azzopardi, Barry J., Agunlejika, Ezekiel O., Zhao, Donglin, Kaji, Ryuhei and Hewakandamby, Buddhika N. (2017) Characterisation of an analogue liquid for hydrodynamic studies of gas-ionic liquid flows. Chemical Engineering Journal, 330 . pp. 223-235. ISSN 1385-8947

Azzopardi, Barry J., Do, H.K., Azzi, A. and Hernandez Perez, V. (2015) Characteristics of air/water slug flow in an intermediate diameter pipe. Experimental Thermal and Fluid Science, 60 . pp. 1-8. ISSN 0894-1777

Azzopardi, Barry J., Ijioma, Amadi, Yang, Shounan, Abdulkareem, Lokman A., Azzi, Abdelwahid and Abdulkadir, Mukhtar (2014) Persistence of frequency in gas–liquid flows across a change in pipe diameter or orientation. International Journal of Multiphase Flow, 67 . pp. 22-31. ISSN 0301-9322

Azzopardi, Barry J., Pioli, L. and Abdulkareem, L.A. (2014) The properties of large bubbles rising in very viscous liquids in vertical columns. International Journal of Multiphase Flow, 67 . pp. 160-173. ISSN 0301-9322

Badiee, A., Ashcroft, Ian and Wildman, Ricky D. (2016) The thermo-mechanical degradation of ethylene vinyl acetate used as a solar panel adhesive and encapsulant. International Journal of Adhesion and Advesives, 68 . pp. 212-218. ISSN 0143-7496

Baharuddin, Mohd Hafiz, Smartt, Chris, Maricar, Mohamed Ismaeel, Thomas, David W.P., Gradoni, Gabriele, Creagh, Stephen C. and Tanner, Gregor (2018) Analysis of nonstationary emissions for efficient characterization of stochastic EM fields. In: International Symposium and Exhibition on Electromagnetic Compatibility (EMC EUROPE 2018), 27-30 Aug 2018, Amsterdam, Netherlands.

Bai, M., Khammas, R., Guan, L., Murray, J.W. and Hussain, T. (2017) Suspension high velocity oxy-fuel spraying of a rutile TiO 2 feedstock: microstructure, phase evolution and photocatalytic behaviour. Ceramics International, 43 (17). pp. 15288-15295. ISSN 1873-3956

Bai, M., Maher, H., Pala, Z. and Hussain, Tanvir (2017) Microstructure and phase stability of suspension high velocity oxy-fuel sprayed yttria stabilised zirconia coatings from aqueous and ethanol based suspensions. Journal of the European Ceramic Society, 38 (4). pp. 1878-1887. ISSN 1873-619X

Bai, Mingwen, Reddy, Liam and Hussain, Tanvir (2018) Experimental and thermodynamic investigations on the chlorine-induced corrosion of HVOF thermal sprayed NiAl coatings and 304 stainless steels at 700 °C. Corrosion Science, 135 . pp. 147-157. ISSN 1879-0496

Bai, Xiaojing, Lu, Gang, Bennet, Tom D., Sarroza, Archi C., Eastwick, Carol, Liu, Hao and Yan, Yong (2017) Combustion behavior profiling of single pulverized coal particles in a drop tube furnace through high-speed imaging and image analysis. Experimental Thermal and Fluid Science, 85 . pp. 322-330. ISSN 0894-1777

Bailey, N.Y., Hibberd, S., Power, H. and Tretyakov, M.V. (2018) Evaluation of the minimum face clearance of a high speed gas lubricated bearing with Navier slip boundary conditions under random excitations. Journal of Engineering Mathematics . ISSN 1573-2703

Bailey, N.Y., Hibberd, Stephen and Power, H. (2017) Effect of possible rotor deformation on the probability of face contact for a liquid film bearing. Tribology International, 109 . pp. 297-310. ISSN 1879-2464

Bakare, M.S., Voisey, K.T., Chokethawai, K. and McCartney, D.G. (2012) Corrosion behaviour of crystalline and amorphous forms of the glass forming alloy Fe43Cr16Mo16C15B10. Journal of Alloys and Compounds, 527 . pp. 210-218. ISSN 1873-4669

Bakare, M.S., Voisey, K.T., Roe, M.J. and McCartney, D.G. (2010) X-ray photoelectron spectroscopy study of the passive films formed on thermally sprayed and wrought Inconel 625. Applied Surface Science, 257 (3). pp. 786-794. ISSN 0169-4332

Balasubramani, Nimal Kumar, Sitnikova, Elena and Li, Shuguang (2016) On understanding the applicability of Mohr-Coulomb failure hypothesis for composite materials using UnitCells©. In: 5th Aircraft Structural Design Conference, 4-6 October 2016, Manchester, UK.

Balfe, Nora, Sharples, Sarah and Wilson, John R. (2018) Understanding is key: an analysis of factors pertaining to trust in a real-world automation system. Human Factors . ISSN 1547-8181

Balfe, Nora, Sharples, Sarah and Wilson, John R. (2014) Impact of automation: measurement of performance, workload and behaviour in a complex control environment. Applied Ergonomics, 47 . pp. 52-64. ISSN 0003-6870

Bandele, Oluwatosin Jeremiah, Desai, Priyanka, Woolfson, Malcolm S. and Phillips, Andrew Julian (2016) Saturation in cascaded optical amplifier free-space optical communication systems. IET Optoelectronics, 10 (3). pp. 71-79. ISSN 1751-8776

Barbosa, Andre R., Ribeiro, Filipe L. A. and Neves, Luís A. C. (2016) Influence of earthquake ground-motion duration on damage estimation - application to steel moment resisting frames. Earthquake Engineering and Structural Dynamics . ISSN 1096-9845

Barco Carrión, Ana Jiménez del, Lo Presti, Davide, Pouget, Simon, Airey, Gordon and Chailleux, Emmanuel (2017) Linear viscoelastic properties of high reclaimed asphalt content mixes with biobinders. Road Materials and Pavement Design . pp. 1-11. ISSN 1468-0629

Barker, Alexander, Syam, Wahyudin P. and Leach, Richard K. (2016) Measurement noise of a coherence scanning interferometer in an industrial environment. In: 31st ASPE Annual Meeting, 23-28 October 2016, Portland, Oregon, USA.

Barman, K., Shipway, P.H., Voisey, K.T. and Pattinson, G. (2018) The role of a thermally sprayed CuNiIn underlayer in the durability of a dry-film lubricant system in fretting: a phenomenological model. Tribology International, 123 . pp. 307-315. ISSN 1879-2464

Barman, K., Shipway, P.H., Voisey, K.T. and Pattinson, G. (2017) Evolution of damage in MoS2-based dry film lubricants (DFLs) in fretting wear – the effect of DFL thickness and contact geometry. Progress in Organic Coatings, 105 . pp. 67-80. ISSN 0300-9440

Barney, Emma R., Hannon, Alex C., Holland, Diane, Umesaki, Norimasa and Tatsumisago, Masahiro (2015) Alkali environments in tellurite glasses. Journal of Non-Crystalline Solids, 414 . pp. 33-41. ISSN 1873-4812

Basile, Francesco, Moore, Terry and Hill, Chris (2018) Analysis on the potential performance of GPS and Galileo Precise Point Positioning using simulated Real-Time Products. Journal of Navigation . pp. 1-15. ISSN 1469-7785

Basile, Francesco, Moore, Terry and Hill, Chris (2017) Analysis on the potential performance of GPS and Galileo Precise Point Positioning using simulated Real-Time products. In: International Navigation Conference of the Royal Institute of Navigation (INC 17), 27-30 Nov 2017, Brighton, UK.

Basiri, Anahid, Amirian, Pouria and Mooney, Peter (2016) Using crowdsourced trajectories for automated OSM data entry approach. Sensors, 16 (9). 1510/1-1510/19. ISSN 1424-8220

Basiri, Anahid, Amirian, Pouria and Winstanley, Adam (2016) The usability analysis for the use of augmented reality and visual instructions in navigation services. In: 13th Conference on Location-Based Services (LBS 2016), 14-16 November 2016, Vienna, Austria.

Basiri, Anahid, Amirian, Pouria, Winstanley, Adam, Marsh, Stuart, Moore, Terry and Gales, Guillaume (2016) Seamless pedestrian positioning and navigation using landmarks. Journal of Navigation, 69 (01). pp. 24-40. ISSN 0373-4633

Basiri, Anahid, Amirian, Pouria, Winstanley, Adam, Moore, Terry and Hill, Chris (2014) Spatial uncertainty management in pedestrian navigation. In: Principle and application progress in location-based services. Lecture notes in geoinformation and cartography . Springer International Publishing, Cham, Swtizerland, pp. 343-355. ISBN 978-3-319-04028-8

Basiri, Anahid, Jackson, Mike, Amirian, Pouria, Pourabdollah, Amir, Sester, Monika, Winstanley, Adam, Moore, Terry and Zhang, Lijuan (2016) Quality assessment of OpenStreetMap data using trajectory mining. Geo-spatial Information Science, 19 (1). pp. 56-68. ISSN 1009-5020

Basiri, Anahid, Lohan, Elena Simona, Figueiredo e Silva, Pedro, Peltola, Pekka, Hill, Chris and Moore, Terry (2014) Overview of positioning technologies from fitness-to-purpose point of view. In: International Conference on Localization and GNSS 2014 (ICL-GNSS 2014), 24-26 June 2014, Helsinki.

Basiri, Anahid, Lohan, Elena Simona and Moore, Terry (2017) The impact of Galileo Open Service on the Location Based Services markets: a review on the cost structure and the potential revenue streams. In: Multi Technology Postitioning. Springer. ISBN 9783319504261 (In Press)

Basiri, Anahid, Lohan, Elena Simona, Moore, Terry, Winstanley, Adam, Peltola, Pekka, Hill, Chris, Amirian, Pouria and Figueiredo e Silva, Pedro (2017) Indoor location based services challenges, requirements and usability of current solutions. Computer Science Review, 24 . pp. 1-12. ISSN 1574-0137

Basiri, Anahid, Marsh, Stuart, Moore, Terry and Amiran, Pouria (2015) Automatic detection of points of interest using spatio-temporal data mining. Journal of Mobile Multimedia, 11 (3&4). pp. 193-204. ISSN 1550-4646

Basiri, Anahid, Moore, Terry and Hill, Chris (2016) The privacy concerns in location based services: protection approaches and remaining challenges. In: 9th International Symposium on Mobile Mapping Technology (MMT2015), 9-11 Dec 2015, Sydney, Australia.

Basiri, Anahid, Moore, Terry, Hill, Chris and Bhatia, Paul (2016) The non-technical challenges of Location Based Services markets: are the users' concerns being ignored? In: 2016 International Conference on Localization and GNSS, ICL-GNSS 2016, 28-30 June 2016, Barcelona, Spain.

Basiri, Anahid, Moore, Terry, Hill, Chris and Bhatia, Paul (2015) Indoor location based services market drivers and challenges. In: International Conference on Location Based Services (LBS 2015), 16-18 September 2015, Augsburg, Germany.

Basiri, Anahid, Moore, Terry, Hill, Chris and Bhatia, Paul (2015) Challenges of Location-Based Services market analysis: current market description. In: Progress in Location-Based Services 2014. Lecture Notes in Geoinformation and Cartography . Springer International Publishing, Switzerland, pp. 273-282. ISBN 978-3-319-11879-6

Basiri, Anahid, Peltola, Pekka, Figueiredo e Silva, Pedro, Lohan, Elena Simona, Moore, Terry and Hill, Chris (2015) Indoor positioning technology assessment using analytic hierarchy process for pedestrian navigation services. In: 2015 International Conference on Location and GNSS (ICL-GNSS), 22nd June 2015 - 24th June 2015, Gothenburg.

Batchelor, A.R., Jones, D.A., Plint, S. and Kingman, S.W. (2015) Deriving the ideal ore texture for microwave treatment of metalliferous ores. Minerals Engineering, 84 . pp. 116-129. ISSN 0892-6875

Battistini, Simone, Cappelletti, Chantal and Graziani, Filippo (2016) Results of the attitude reconstruction for the UniSat-6 microsatellite using in-orbit data. Acta Astronautica, 127 . pp. 87-94. ISSN 0094-5765

Baumers, Martin, Beltrametti, Luca, Gasparre, Angelo and Hague, Richard (2017) Informing additive manufacturing technology adoption: total cost and the impact of capacity utilisation. International Journal of Production Research, 55 (23). pp. 6957-6970. ISSN 1366-588X

Baydu, C. Al, Simmons, Kathy and Morvan, Herve (2014) Computational investigation of flows and pressure fields associated with spur gear meshing. In: ASME Turbo Expo 2014, 16-20 June 2014, Düsseldorf, Germany.

Beccarelli, Paolo and Maffei, Roberto (2018) Pneumatic membranes for biogas plants. Proceedings of the IASS Annual Symposia . ISSN 2518-6582

Begines, Belen, Hook, Andrew L., Alexander, Morgan R., Tuck, Christopher J. and Wildman, Ricky D. (2016) Development, printability and post-curing studies of formulations of materials resistant to microbial attachment for use in inkjet based 3D printing. Rapid Prototyping Journal, 22 (5). pp. 835-841. ISSN 1355-2546

Beneroso, Daniel, Monti, T., Kostas, E.T. and Robinson, J. (2017) Microwave pyrolysis of biomass for bio-oil production: Scalable processing concepts. Chemical Engineering Journal, 316 . pp. 481-498. ISSN 1385-8947

Bergamini, Elena, de la Rubia, Ernesto, Diaz-Estrella, Antonio, Reyes-Lecuona, Arcadio, Langley, Alyson, Brown, Michael and Sharples, Sarah (2018) Natural locomotion based on a reduced set of inertial sensors: decoupling body and head directions indoors. PLoS ONE, 13 (4). e0195191/1-e0195191/22. ISSN 1932-6203

Bertola, Luca, Cox, Tom, Wheeler, Patrick, Garvey, Seamus D. and Morvan, Herve (2015) Electromagnetic launch systems for civil aircraft assisted take-off. Archives of Electrical Engineering, 64 (4). pp. 535-546. ISSN 2300-2506

Binner, Eleanor, Lester, Edward, Kingman, S.W., Dodds, Chris, Wu, Tao, Robinson, John P., Wardle, Peter and Mathews, Jonathan P. (2014) A review of microwave coal processing. Journal of Microwave Power and Electromagnetic Energy, 48 (1). pp. 35-60. ISSN 0832-7823

Binner, Eleanor, Medeira-Munoyerro, Maria, Huddle, Thomas, Kingman, S.W., Dodds, Chris, Dimitrakis, G., Robinson, John P. and Lester, Edward (2014) Factors affecting the microwave coking of coals and the implications on microwave cavity design. Fuel Processing Technology, 125 . pp. 8-17. ISSN 0378-3820

Binner, Eleanor, Robinson, John P., Kingman, S.W., Lester, Edward, Azzopardi, Barry J., Dimitrakis, Georgios and Briggs, John (2013) Separation of oil/water emulsions in continuous flow using microwave heating. Energy and Fuels, 27 (6). pp. 3173-3178. ISSN 1520-5029

Binner, Eleanor, Robinson, John P., Silvester, S.A., Kingman, S.W. and Lester, Edward (2014) Investigation into the mechanisms by which microwave heating enhances separation of water-in-oil emulsions. Fuel, 116 . pp. 516-521. ISSN 1873-7153

Blaxter, L.L., Morris, David E., Crowe, John A., Henry, C., Hill, Stephen J., Sharkey, Don, Vyas, H. and Hayes-Gill, Barrie R. (2015) An automated quasi-continuous capillary refill timing device. Physiological Measurement, 37 (1). ISSN 1361-6579

Blaxter, Laurence, Yeo, Mildred, McNally, Donal, Crowe, John A., Henry, Caroline, Hill, Sarah, Mansfield, Neil, Leslie, Andrew and Sharkey, Don (2017) Neonatal head and torso vibration exposure during inter-hospital transfer. Proceedings of the Institution of Mechanical Engineeers, Part H: Journal of Engineering in Medicine . pp. 1-15. ISSN 2041-3033

Bointon, Patrick, Todhunter, Luke, Stavroulakis, Petros, Clare, Adam and Leach, Richard (2018) The effects of vibration on fringe projection systems. In: euspen’s 18th International Conference & Exhibition, 4-8 June 2018, Venice, Italy.

Bonenberg, Lukasz K., Hancock, Craig M. and Roberts, Gethin W. (2010) Indoor multipath effect study on the Locata system. Journal of Applied Geodesy, 4 (3). pp. 137-143. ISSN 1862-9016

Booth, Andrew J., Marshall, Alec M. and Stace, Rod (2016) Probabilistic analysis of a coal mine roadway including correlation control between model input parameters. Computers and Geotechnics, 74 . pp. 151-162. ISSN 0266-352X

Borsci, Simone, Lawson, Glyn, Salanitri, Davide and Jha, Bhavna (2016) When simulated environments make the difference: the effectiveness of different types of training of car service procedures. Virtual Reality, 20 (2). pp. 83-99. ISSN 1434-9957

Bournas, Dionysios A., Negro, Paolo and Taucer, Fabio F. (2013) Performance of industrial buildings during the Emilia earthquakes in Northern Italy and recommendations for their strengthening. Bulletin of Earthquake Engineering, 12 (5). pp. 2383-2404. ISSN 1573-1456

Bristot, Andrea, Morvan, Herve and Simmons, Kathy (2016) Evaluation of a volume of fluid CFD methodology for the oil film thickness estimation in an aero-engine bearing chamber. In: ASME 2016 Turbo Expo, 13-17 Jun 2016, Seoul, South Korea.

Brown, Brian, Rutherford, Peter and Crawford, Paul (2015) The role of noise in clinical environments with particular reference to mental health care: a narrative review. International Journal of Nursing Studies, 52 . pp. 1514-1524. ISSN 1873-491X

Brown, Louise P., Endruweit, Andreas, Long, Andrew C. and Jones, I. Arthur (2018) Characterisation and modeling of complex geometries using TexGen. In: 13th International Conference on Textile Composites (TexComp-13), 17-19 Sept 2018, Milan, Italy.

Brown, Louise P., Gommer, Frank, Zeng, Xuesen and Long, Andrew C. (2016) Modelling framework for optimum multiaxial 3D woven textile composites. In: 7th World Conference in 3D Fabrics and Their Applications, 8-9 Sept 2016, Roubaix, France.

Buticchi, Giampaolo, Bozhko, Serhiy, Liserre, Marco, Wheeler, Patrick and Al-Haddad, Kamal (2018) On-board microgrids for the More Electric Aircraft: technology review. IEEE Transactions on Industrial Electronics . p. 1. ISSN 1557-9948

Buttress, A.J., Jones, D.A., Dodds, Chris, Dimitrakis, Georgios, Dawson, Andrew and Kingman, S.W. (2015) Understanding the scabbling of concrete using microwave energy. Cement and Concrete Research, 75 . pp. 75-90. ISSN 0008-8846

Buttress, A.J., Jones, D.A. and Kingman, S.W. (2015) Microwave processing of cement and concrete materials - towards an industrial reality? Cement and Concrete Research, 68 . pp. 112-123. ISSN 0008-8846

Cai, Rong-Rong, Zhang, Li-Zhi and Yan, Yuying (2017) Performance prediction of PM 2.5 removal of real fibrous filters with a novel model considering rebound effect. Applied Thermal Engineering, 111 . pp. 1536-1547. ISSN 1873-5606

Cai, W., McDowell, Glenn R. and Airey, G.D. (2013) Discrete element modelling of uniaxial constant strain rate tests on asphalt mixtures. Granular Matter, 15 (2). pp. 163-174. ISSN 1434-5021

Can, Işın and Heath, Tim (2015) In-between spaces and social interaction: a morphological analysis of Izmir using space syntax. Journal of Housing and the Built Environment, 31 (1). pp. 31-49. ISSN 1566-4910

Caner, Murat, Gerada, Chris and Asher, Greg (2015) Permanent magnet machine design trade-offs to achieve sensorless control at high load. COMPEL - The international journal for computation and mathematics in electrical and electronic engineering, 34 (1). pp. 324-343. ISSN 0332-1649

Caner, Murat, Gerada, Christopher, Asher, Greg and Özer, Tolga (2016) Design optimization of Halbach array permanent magnet motor to achieve sensorless performance using genetic algorithm. COMPEL - The international journal for computation and mathematics in electrical and electronic engineering, 35 (5). pp. 1741-1759. ISSN 0332-1649

Capel, Andrew J., Wright, Andrew, Harding, Matthew J., Weaver, George W., Li, Yuqi, Harris, Russell A., Edmondson, Steve, Goodridge, Ruth D. and Christie, Steven D.R. (2017) 3D printed fluidics with embedded analytic functionality for automated reaction optimisation. Beilstein Journal of Organic Chemistry, 13 . pp. 111-119. ISSN 1860-5397

Caporaso, Nicola, Whitworth, Martin B., Grebby, Stephen and Fisk, Ian D. (2018) Rapid prediction of single green coffee bean moisture and lipid content by hyperspectral imaging. Journal of Food Engineering, 228 . pp. 18-29. ISSN 0260-8774

Caporaso, Nicola, Whitworth, Martin B., Grebby, Stephen and Fisk, Ian D. (2018) Non-destructive analysis of sucrose, caffeine and trigonelline on single green coffee beans by hyperspectral imaging. Food Research International, 106 . pp. 193-203. ISSN 1873-7145

Caramazana-Gonzalez, P., Dunne, Peter W., Gimeno-Fabra, Miquel, Zilka, Miroslav, Ticha, M., Stieberova, B., Freiberg, F., McKechnie, Jon and Lester, Edward (2017) Assessing the life cycle environmental impacts of titania nanoparticle production by continuous flow solvo/hydrothermal synthesis. Green Chemistry, 19 . pp. 1536-1547. ISSN 1463-9262

Carroll, S.P., Owen, J.S. and Hussein, M.F.M. (2014) Experimental identification of the lateral human–structure interaction mechanism and assessment of the inverted-pendulum biomechanical model. Journal of Sound and Vibration, 333 (22). pp. 5865-5884. ISSN 0022-460X

Casey, Sean P., Aydin, Devrim, Elvins, Jon and Riffat, Saffa (2017) Salt impregnated desiccant matrices for ‘open’ thermochemical energy conversion and storage: improving energy density utilisation through hygrodynamic & thermodynamic reactor design. Energy Conversion and Management, 142 . pp. 426-440. ISSN 0196-8904

Castellazzi, Alberto, Fayyaz, Asad, Romano, G., Yang, Li, Riccio, M. and Irace, A. (2016) SiC power MOSFETs performance, robustness and technology maturity. Microelectronics Reliability, 58 . pp. 164-176. ISSN 0026-2714

Catchpole-Smith, S., Aboulkhair, N., Parry, L., Tuck, C., Ashcroft, Ian and Clare, A. (2017) Fractal scan strategies for selective laser melting of ‘unweldable’ nickel superalloys. Additive Manufacturing . ISSN 2214-8604

Cavaco, Eduardo S., Grilo, Inês, Gouveia, João Paulo, Júlio, E. and Neves, Luís C. (2018) Mechanical performance of eco-efficient hollow clay bricks incorporating industrial nano-crystalline aluminium sludge. European Journal of Environmental and Civil Engineering . ISSN 1964-8189 (In Press)

Cesaroni, Claudio, Spogli, Luca, Alfonsi, Lucilla, De Franceschi, Giorgiana, Ciraolo, Luigi, Galera Monico, Joao Francisco, Scotto, Carlo, Romano, Vincenzo, Aquino, Marcio and Bougard, Bruno (2015) L-band scintillations and calibrated total electron content gradients over Brazil during the last solar maximum. Journal of Space Weather and Space Climate, 5 . A36/1-A36/11. ISSN 2115-7251

Chakladar, N. D, Harper, Lee Thomas and Parsons, A. J. (2016) Optimisation of composite bone plates for ulnar transverse fractures. Journal of the Mechanical Behavior of Biomedical Materials, 57 . pp. 334-346. ISSN 1751-6161

Challis, Richard, Ivchenko, Vladimir and Al-Lashi, Raied (2013) Ultrasonic attenuation measurements at very high SNR: Correlation, information theory and performance. Journal of Physics: Conference Series, 457 (012004). pp. 1-12. ISSN 1742-6588

Chandra, Budi and Simmons, Kathy (2016) Innovative shallow sump customizations for aero-engine bearing chambers. In: ASME 2016 Turbo Expo, 13-17 Jun 2016, Seoul, South Korea.

Chandra, Budi, Simmons, Kathy and Murphy, Andrew (2017) Mechanisms for residence volume reduction in shallow sump. Journal of Engineering for Gas Turbines and Power . ISSN 1528-8919 (In Press)

Chao, Xujiang, Qi, Lehua, Tian, Wenlong, Hou, Xianghui, Ma, WenJing and Li, Hejun (2018) Numerical evaluation of the influence of porosity on bending properties of 2D carbon/carbon composites. Composites Part B: Engineering, 136 . pp. 72-80. ISSN 1359-8368

Chen, Cheng, McDowell, Glenn R. and Thom, N.H. (2013) A study of geogrid-reinforced ballast using laboratory pull-out tests and discrete element modelling. Geomechanics and Geoengineering, 8 (4). pp. 244-253. ISSN 1748-6025

Chen, H, McCartney, D.G. and Voisey, K.T. (2015) Effect of surface conditions on internal oxidation and nitridation of HVOF MCrAlY coatings. Materials at High Temperatures, 32 (1-2). pp. 215-220. ISSN 1878-6413

Chen, H., Hyde, T.H., Voisey, K.T. and McCartney, D.G. (2013) Application of small punch creep testing to a thermally sprayed CoNiCrAlY bond coat. Materials Science and Engineering: A, 585 . pp. 205-213. ISSN 0921-5093

Chen, H., Jackson, G.A., Voisey, K.T. and McCartney, D.G. (2016) Modelling and experimental study on β-phase depletion behaviour of HVOF sprayed free-standing CoNiCrA1Y coatings during oxidation. Surface and Coatings Technology, 291 . pp. 34-42. ISSN 1879-3347

Chen, H. and McCartney, D.G. (2017) Some aspects on modelling of the β-phase depletion behaviour under different oxide growth kinetics in HVOF CoNiCrAlY coatings. Surface and Coatings Technology, 313 . pp. 107-114. ISSN 1879-3347

Chen, H., Pala, Z., Hussain, T. and McCartney, D.G. (2017) Fabrication and microstrain evolution of Al-TiB2 composite coating by cold spray deposition. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications . pp. 1-9. ISSN 2041-3076

Chen, H., Si, Y.Q. and McCartney, D.G. (2017) An analytical approach to the β-phase coarsening behaviour in a thermally sprayed CoNiCrAlY bond coat alloy. Journal of Alloys and Compounds . ISSN 1873-4669

Chen, Han-Mei, Yu, Hai-Sui and Smith, Martin J. (2016) Physical model tests and numerical simulation for assessing the stability of brick-lined tunnels. Tunnelling and Underground Space Technology, 53 . pp. 109-119. ISSN 0886-7798

Chen, Menghao, Lu, Jiawa, Felfel, Reda M., Parsons, Andrew J., Irvine, Derek J., Rudd, Christopher D. and Ahmed, Ifty (2017) Wet and dry flexural high cycle fatigue behaviour of fully bioresorbable glass fibre composites: in-situ polymerisation versus laminate stacking. Composites Science and Technology, 150 . pp. 1-15. ISSN 0266-3538

Chen, Qusen, Jiang, Weiping, Meng, Xiaolin, Jiang, Peng, Wang, Kaihua, Xie, Yilin and Ye, Jun (2018) Vertical deformation monitoring of the suspension bridge tower using GNSS: a case study of the Forth Road Bridge in the UK. Remote Sensing, 10 (3). 364/1-364/19. ISSN 2072-4292

Chen, S., McGregor, O.P.L., Endruweit, A., Elsmore, M.T., De Focatiis, D.S.A., Harper, L.T. and Warrior, N.A. (2017) Double diaphragm forming simulation for complex composite structures. Composites Part A: Applied Science and Manufacturing, 95 . pp. 346-358. ISSN 1359-835X

Chen, S., McGregor, O.P.L., Harper, L.T., Endruweit, A. and Warrior, N.A. (2018) Optimisation of local in-plane constraining forces in double diaphragm forming. Composite Structures . ISSN 0263-8223

Chen, S., McGregor, O.P.L., Harper, L.T., Endruweit, A. and Warrior, N.A. (2016) Defect formation during preforming of a bi-axial non-crimp fabric with a pillar stitch pattern. Composites Part A: Applied Science and Manufacturing, 91 . pp. 156-167. ISSN 1359-835X

Chen, S., Yan, Y.Y. and Gong, W. (2017) A simple lattice Boltzmann model for conjugate heat transfer research. International Journal of Heat and Mass Transfer, 107 . pp. 862-870. ISSN 0017-9310

Chen, Sheng (2018) Simulation of conjugate heat transfer between fluid-saturated porous media and solid wall. International Journal of Thermal Sciences, 124 . pp. 477-483. ISSN 1290-0729

Chen, Sheng, Liu, Hao and Zheng, Chuguang (2017) Methane combustion in MILD oxyfuel regime: influences of dilution atmosphere in co-flow configuration. Energy, 121 . pp. 159-175. ISSN 1873-6785

Chen, Sheng, Yang, Bo, Luo, Kai H., Xiong, Xiaopeng and Zheng, Chuguang (2016) Double diffusion natural convection in a square cavity filled with nanofluid. International Journal of Heat and Mass Transfer, 95 . pp. 1070-1083. ISSN 0017-9310

Chen, Sheng, Yang, Bo and Zheng, Chuguang (2017) Simulation of double diffusive convection in fluid-saturated porous media by lattice Boltzmann method. International Journal of Heat and Mass Transfer, 108 (Part B). pp. 1501-1510. ISSN 0017-9310

Chen, Sheng, Yang, Bo and Zheng, Chuguang (2016) A lattice Boltzmann model for heat transfer in heterogeneous media. International Journal of Heat and Mass Transfer, 102 . pp. 637-644. ISSN 0017-9310

Chen, W.L., Dodd, N., Tiessen, M.C.H. and Calvete, D. (2017) An idealised study for the long term evolution of crescentic bars. Continental Shelf Research . ISSN 0278-4343

Chen, X., Ashcroft, Ian, Wildman, Ricky D. and Tuck, Christopher (2017) A combined inverse finite element – elastoplastic modelling method to simulate the size-effect in nanoindentation and characterise materials from the nano to micro-scale. International Journal of Solids and Structures, 104-105 . pp. 25-34. ISSN 0020-7683

Chen, Xuesheng, Ashcroft, Ian, Tuck, Christopher, He, Y.F., Hague, Richard J.M. and Wildman, Ricky D. (2017) An investigation into the depth and time dependent behavior of UV cured 3D ink jet printed objects. Journal of Materials Research, 32 (8). pp. 1407-1420. ISSN 2044-5326

Chen, Ziwei, Zhu, Jie, Bai, Hongyu, Yan, Yuying and Zhang, Lizhi (2017) Experimental study of a membrane-based dehumidification cooling system. Applied Thermal Engineering, 115 . pp. 1315-1321. ISSN 1873-5606

Cherdantsev, Andrey V., Hann, David B. and Azzopardi, Barry J. (2014) Study of gas-sheared liquid film in horizontal rectangular duct using high-speed LIF technique: three-dimensional wavy structure and its relation to liquid entrainment. International Journal of Multiphase Flow, 67 . pp. 52-64. ISSN 0301-9322

Cherdantsev, Andrey V., Hann, David B., Hewakandamby, Buddhika N. and Azzopardi, Barry J. (2016) Study of the impacts of droplets deposited from the gas core onto a gas-sheared liquid film. International Journal of Multiphase Flow, 88 . pp. 69-86. ISSN 0301-9322

Chernysheva, Maria, Al Alraimi, Mohammed, Rance, Graham A., Weston, Nicola J., Shi, Baogui, Saied, Sayah, Sullivan, John L., Marsh, Nicholas and Rozhin, Aleksey (2018) Revealing the nature of morphological changes in carbon nanotube-polymer saturable absorber under high-power laser irradiation. Scientific Reports, 8 . p. 7491. ISSN 2045-2322

Chesna, Jacob W., Wiedmaier, Bob F., Wang, Jinlin, Samara, Ayman, Leach, Richard K., Her, Tsing-Hua and Smith, Stuart T. (2016) Aerial wetting contact angle measurement using confocal microscopy. Measurement Science and Technology, 27 (12). ISSN 1361-6501

Cheval, Nicolas, Gindy, Nabil, Flowkes, Clifford and Fahmi, Amir (2012) Polyamide 66 microspheres metallised with in situ synthesised gold nanoparticles for a catalytic application. Nanoscale Research Letters, 7 (1). ISSN 1556-276X

Chiachío, Juan, Chiachío, Manuel, Prescott, Darren and Andrews, John (2017) A reliability-based prognostics framework for railway track management. In: Annual Conference of the Prognostics and Health Management Society, 2017, 2-5 October 2017, St. Petersburg, Florida, USA.

Chiachío, Juan, Chiachío, Manuel, Sankararaman, Shankar and Prescott, Darren (2018) A Bayesian assessment of an approximate model for unconfined water flow in sloping layered porous media. Transport in Porous Media . ISSN 1573-1634

Chiachío, Manuel, Chiachío, Juan, Prescott, Darren and Andrews, John (2018) A new paradigm for uncertain knowledge representation by Plausible Petri nets. Information Sciences, 453 . pp. 323-345. ISSN 1872-6291

Chiachío, Manuel, Chiachío, Juan, Prescott, Darren and Andrews, John (2016) An information theoretic approach for knowledge representation using Petri nets. In: Future Technologies Conference 2016, 6-7 Dec 2016, San Francisco, USA.

Chiachío, Manuel, Chiachío, Juan, Sankararaman, Shankar and Andrews, John (2017) Integration of prognostics at a system level: a Petri net approach. In: 2017 Annual Conference of the Prognostics and Health Management Society, 2-5 Oct 2017, St. Petersburg, Florida, USA.

Chiachío, Manuel, Chiachío, Juan, Sankararaman, Shankar, Goebel, Kai and Andrews, John (2017) A new algorithm for prognostics using subset simulation. Reliability Engineering & System Safety, 168 . pp. 189-199. ISSN 0951-8320

Chiarelli, A., Dawson, Andrew and Garcia, Alvaro (2017) Field evaluation of the effects of air convection in energy harvesting asphalt pavements. Sustainable Energy Technologies and Assessments, 21 . pp. 50-58. ISSN 2213-1388

Chiarelli, Andrea, Dawson, Andrew and Garcia, Alvaro (2017) Pavement temperature mitigation by the means of geothermally and solar heated air. Geothermics, 68 . pp. 9-19. ISSN 0375-6505

Chiarelli, Andrea, Dawson, Andrew and Garcia, Alvaro (2015) Stochastic generation of virtual air pores in granular materials. Granular Matter, 17 (5). pp. 617-627. ISSN 1434-5021

Chiarelli, Andrea, Dawson, Andrew and Garcia, Alvaro (2015) Parametric analysis of energy harvesting pavements operated by air convection. Applied Energy, 154 . pp. 951-958. ISSN 0306-2619

Chiarelli, Andrea, Dawson, Andrew and Garcia, Alvaro (2015) Generation of virtual asphalt mixture porosity for computational modelling. Powder Technology, 275 . pp. 351-360. ISSN 0032-5910

Chiarelli, Andrea, Dawson, Andrew and Garcia, Alvaro (2015) Analysis of the performance of an air-powered energy-harvesting pavement. Transportation Research Record, 2523 . pp. 156-163. ISSN 2169-4052

Chong, Baohe, Zhu, Wen and Hou, Xianghui (2017) Epitaxial hetero-structure of CdSe/TiO2 nanotube arrays with PEDOT as hole transfer layer for photoelectrochemical hydrogen evolution. Journal of Materials Chemistry A . ISSN 2050-7496

Choong, Gabriel Y. H. and De Focatiis, Davide S.A. (2016) A method for the determination and correction of the effect of thermal degradation on the viscoelastic properties of degradable polymers. Polymer Degradation and Stability, 130 . pp. 182-188. ISSN 1873-2321

Chouvion, B., McWilliam, S. and Popov, A.A. (2018) Effect of nonlinear electrostatic forces on the dynamic behaviour of a capacitive ring-based Coriolis Vibrating Gyroscope under severe shock. Mechanical Systems and Signal Processing, 106 . pp. 395-412. ISSN 0888-3270

Chronopoulos, D. (2018) Calculation of guided wave interaction with nonlinearities and generation of harmonics in composite structures through a wave finite element method. Composite Structures, 186 . pp. 375-384. ISSN 0263-8223

Chronopoulos, Dimitrios (2017) Wave steering effects in anisotropic composite structures: direct calculation of the energy skew angle through a finite element scheme. Ultrasonics, 73 . pp. 43-48. ISSN 0041-624X

Chronopoulos, Dimitrios (2015) Design optimization of composite structures operating in acoustic environments. Journal of Sound and Vibration, 355 . pp. 322-344. ISSN 0022-460X

Chronopoulos, Dimitrios, Antoniadis, I. and Ampatzidis, Theofanis (2017) Enhanced acoustic insulation properties of composite metamaterials having embedded negative stiffness inclusions. Extreme Mechanics Letters, 12 . pp. 48-54. ISSN 2352-4316

Chronopoulos, Dimitrios, Collet, Manuel and Ichchou, Mohamed (2017) Wave sensitivity analysis for periodic and arbitrarily complex composite structures. Engineering Computations . ISSN 0264-4401

Chronopoulos, Dimitrios, Droz, C., Apalowo, R., Ichchou, M. and Yan, W.J. (2017) Accurate structural identification for layered composite structures, through a wave and finite element scheme. Composite Structures, 182 . pp. 566-578. ISSN 1879-1085

Chronopoulos, Dimitrios, Ichchou, M., Troclet, B. and Bareille, O. (2014) Computing the broadband vibroacoustic response of arbitrarily thick layered panels by a wave finite element approach. Applied Acoustics, 77 . pp. 89-98. ISSN 0003-682X

Chronopoulos, Dimitrios, Ichchou, Mohamed, Troclet, Bernard and Bareille, Olivier (2014) Predicting the broadband response of a layered cone-cylinder-cone shell. Composite Structures, 107 . pp. 149-159. ISSN 02638223

Clare, Adam T., Speidel, Alistair, Mitchell-Smith, Jonathon and Patwardhan, Siddharth (2017) Electrolyte design for suspended particulates in electrolyte jet processing. CIRP Annals - Manufacturing Technology . ISSN 0007-8506 (In Press)

Clark, Elizabeth A., Alexander, Morgan R., Irvine, Derek J., Roberts, Clive J., Wallace, Martin J., Sharpe, Sonja, Yoo, Jae, Hague, Richard J.M., Tuck, Chris J. and Wildman, Ricky D. (2017) 3D printing of tablets using inkjet with UV photoinitiation. International Journal of Pharmaceutics . ISSN 0378-5173

Clarke, S. and Prescott, Darren (2017) Identifying the factors influencing track degradation on the UK rail network. In: Stephenson Conference : Research for Railways, 25th-27th April 2017, London, United Kingdom. (Unpublished)

Colombi, Andrea, Ageeva, Victoria, Smith, Richard J., Clare, Adam T., Patel, Rikesh, Clark, Matt, Colquitt, Daniel, Roux, Philippe, Guenneau, Sebastien and Craster, Richard V. (2017) Enhanced sensing and conversion of ultrasonic Rayleigh waves by elastic metasurfaces. Scientific Reports, 7 . 6750/1-6750/9. ISSN 2045-2322

Connor, P.H., La Rocca1, A., Xu, Z., Eastwick, C.N., Pickering, S.J. and Gerada, C. (2018) Numerical investigations of convective phenomena of oil impingement on end-windings. In: 9th International Conference on Power Electronics, Machines and Drives (PEMD 2018), 17-19 April 2018, Liverpool, UK. (In Press)

Connor, Peter H., Eastwick, Carol, Pickering, S.J., Gerada, C. and Rolston, R. (2016) Stator and rotor vent modelling in a MVA rated synchronous machine. In: International Conference on Electrical Machines (ICEM 2016), 4-7 Sept. 2016, Lausanne, Switzerland.

Connor, Peter H., Pickering, S.J., Gerada, C., Eastwick, Carol, Micallef, Christopher and Tighe, Chris (2013) Computational fluid dynamics modelling of an entire synchronous generator for improved thermal management. IET Electric Power Applications, 7 (3). pp. 231-236. ISSN 1751-8679

Corbridge, D.M., Harper, Lee Thomas, De Focatiis, Davide S.A. and Warrior, N.A. (2017) Compression moulding of composites with hybrid fibre architectures. Composites Part A: Applied Science and Manufacturing, 95 . pp. 87-99. ISSN 1359-835X

Cordes, A. Laura, Pychynski, B. Tim, Schwitzke, C. Corina, Bauer, D. Hans-Jörg, de Carvalho, A. Thiago P. and Morvan, B. Hervé P. (2017) Experimental study of the pressure loss in aero-engine air-oil separators. Aeronautical Journal . ISSN 0001-9240

Cova, P., Aliyu, Attahir Murtala, Castellazzi, Alberto, Chiozzi, D., Delmonte, N., Lasserre, P. and Pignoloni, N. (2017) Thermal design and characterization of a modular integrated liquid cooled 1200 V-35 A SiC MOSFET bi-directional switch. Microelectronics Reliability, 76-77 . pp. 277-281. ISSN 0026-2714

Craven, Michael P. (2006) Routes and requirements for realizing pervasive medical devices. In: Pervasive computing in healthcare. CRC Press (Taylor & Francis Group), Boca Raton, Fla; London. ISBN 084933621X.

Craven, Michael P. (2004) The MATCH project: collaboration between academia and industry. Focus Magazine . pp. 15-16.

Craven, Michael P. (1997) A faster learning neural network classifier using selective backpropagation. In: Fourth IEEE International Conference on Electronics, Circuits and Systems, 15-18 December 1997, Cairo, Egypt.

Craven, Michael P. and Curtis, K. Mervyn (2004) GesRec3D: a real-time coded gesture-to-speech system with automatic segmentation and recognition thresholding using dissimilarity measures. In: Gesture-based communication in human-computer interaction: 5th International Gesture Workshop, GW 2003: Genova, Italy, April 2003: selected revised papers. Lecture notes in computer science (2915). Springer, Berlin, pp. 231-238. ISBN 9783540210726

Craven, Michael P., Davey, Shirley M. and Martin, Jennifer L. (2005) Factors influencing wider acceptance of Computer Assisted Orthopaedic Surgery (CAOS) technologies for Total Joint Arthroplasty. Working Paper: MATCH_CAOS_Review_December2005_Craven_MP. Multidisciplinary Assessment of Technology Centre for Healthcare (MATCH). (Unpublished)

Craven, Michael P. and Fabricatore, Carlo (2016) Game features of cognitive training. In: International Conference on Interactive Technologies and Games (ITAG) 2016, 26-27 Oct 2016, Nottingham, UK.

Craven, Michael P. and Martin, Jennifer L. (2004) How does the healthcare industry involve users in medical device development? Pointers for UbiHealth. In: UbiHealth 2004: 3rd International Workshop on Ubiquitous Computing for Pervasive Healthcare Applications, 7-10 September 2004, Nottingham, UK.

Craven, Michael P., Pecchia, Leandro and Martin, Jennifer L. (2013) User requirements for image-guided navigation in spinal surgery. In: World Congress on Medical Physics and Biomedical Engineering, May 26-31 2012, Beijing, China. IFMBE proceedings (39). Springer, Berlin. ISBN 978-3-642-29304-7

Crossley, Richard J., Schubel, Peter J. and De Focatiis, Davide S.A. (2013) Time–temperature equivalence in the tack and dynamic stiffness of polymer prepreg and its application to automated composites manufacturing. Composites Part A: Applied Science and Manufacturing, 52 . pp. 126-133. ISSN 1359-835X

Cuadri, A.A., Partal, P., Ahmad, N., Grenfell, J. and Airey, G. (2015) Chemically modified bitumens with enhanced rheology and adhesion properties to siliceous aggregates. Construction and Building Materials, 93 . pp. 766-774. ISSN 0950-0618

Cunningham, Dickson, Gosar, Andrej, Kastelic, Vanja, Grebby, Stephen and Tansey, Kevin (2007) Multi-disciplinary investigations of active faults in the Julian Alps, Slovenia. Acta Geodynamica et Geomaterialia, 4 (1). pp. 77-85. ISSN 1214-9705

Cunningham, Dickson, Grebby, Stephen, Tansey, Kevin, Gosar, Andrej and Kastelic, Vanja (2006) Application of airborne LiDAR to mapping seismogenic faults in forested mountainous terrain, southeastern Alps, Slovenia. Geophysical Research Letters, 30 (20). L20308. ISSN 0094-8276

Dadashi, Nastaran, Golightly, David and Sharples, Sarah (2017) Seeing the woods for the trees: the problem of information inefficiency and information overload on operator performance. Cognition, Technology and Work, 19 (4). pp. 561-570. ISSN 1435-5566

Dadashi, Nastaran, Golightly, David and Sharples, Sarah (2016) Seeing the woods for the trees: the problem of information inefficiency and information overload on operator performance. In: 13th IFAC/IFIP/IFORS/IEA Symposium on Analysis, Design, and Evaluation of Human-Machine Systems, 30 Aug-2 Sept 2016, Kyoto, Japan. (In Press)

Dadashi, Nastaran, Wilson, John R., Golightly, David and Sharples, Sarah (2016) Alarm handling for health monitoring: operator strategies used in an electrical control room of a rail network. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 230 (5). pp. 1415-1428. ISSN 2041-3017

Dadashi, Nastaran, Wilson, John R., Golightly, David and Sharples, Sarah (2014) A framework to support human factors of automation in railway intelligent infrastructure. Ergonomics, 57 (3). pp. 387-402. ISSN 1366-5847

Daniels, L.M., Ling, S., Savvin, S.N., Pitcher, M.J., Dyer, M.S., Claridge, J.B., Slater, B., Corà, F., Alaria, J. and Rosseinsky, M.J. (2018) A and B site doping of a phonon-glass perovskite oxide thermoelectric. Journal of Materials Chemistry A, 6 (32). pp. 15640-15652. ISSN 2050-7488

Darkwa, J., Li, Y. and Chow, D.H.C. (2014) Heat transfer and air movement behaviour in a double-skin façade. Sustainable Cities and Society, 10 . pp. 130-139. ISSN 2210-6707

Darkwa, Jo (2012) Editorial. International Journal of Low-Carbon Technologies, 7 (3). p. 167. ISSN 1748-1317

Darkwa, Jo and Fraser, S. (2012) Performance of an integrated solar absorption cooling system in a sub-tropical region. International Journal of Low-Carbon Technologies, 7 (3). pp. 199-207. ISSN 1748-1317

Daure, J.L., Carrington, M.J., Shipway, P.H., McCartney, D.G. and Stewart, D.A. (2018) A comparison of the galling wear behaviour of PVD Cr and electroplated hard Cr thin films. Surface and Coatings Technology . ISSN 0257-8972

Daure, J.L., Voisey, K.T., Shipway, P.H. and Stewart, D.A. (2017) The effect of coating architecture and defects on the corrosion behaviour of a PVD multilayer Inconel 625/Cr coating. Surface and Coatings Technology, 324 . pp. 403-412. ISSN 1879-3347

Davenne, T.R., Garvey, S.D., Cardenas, B. and Simpson, M.C. (2017) The cold store for a pumped thermal energy storage system. Journal of Energy Storage, 14 (2). pp. 295-310. ISSN 2352-152X

Davies, Eleanor Bethan, Craven, Michael P., Martin, Jennifer L. and Simons, Lucy (2017) Proportionate methods for evaluating a simple digital mental health tool. Evidence Based Mental Health, 20 (4). pp. 112-117. ISSN 1468-960X

Dawson, Andrew (2015) Materials used in road pavements. In: Highways. ICE Publishing, pp. 165-218.

Dawson, Andrew (2014) Anticipating and responding to pavement performance as climate changes. In: Climate Change, Energy, Sustainability and Pavements. Green energy and technology . Springer, Heidelberg, pp. 127-157. ISBN 978-3-662-44718-5

Dawson, Andrew, Mallick, Rajib, Hernandez, Alvaro García and Dehdezi, Pejman Keikhaei (2014) Energy harvesting from pavements. In: Climate change, energy, sustainability and pavements. Green energy and technology . Springer, Heidelberg, pp. 481-517. ISBN 978-3-662-44718-5

Dawson, Andrew R., Dehdezi, Pejman Keikhaei, Hall, Matthew R., Wang, Junzhe and Isola, Riccardo (2012) Enhancing thermal properties of asphalt materials for heat storage and transfer applications. Road Materials and Pavement Design, 13 (4). pp. 784-803. ISSN 1468-0629

De Filippis, Maria Laura, Craven, Michael P. and Dening, Tom (2017) Preferences of informal carers on technology packages to support meal production by people living with dementia, elicited from personalised AT and ICT product brochures. Informatics, 4 (1). pp. 1-12. ISSN 2227-9709

Degano, Michele, Carraro, M. and Bianchi, Nicola (2015) Selection criteria and robust optimization of a traction PM-Assisted Synchronous Reluctance motor. IEEE Transactions on Industry Applications, 51 (6). pp. 4383-4391. ISSN 1939-9367

Dehdezi, Pejman Keikhaei, Dawson, Andrew R., Hall, Matthew R., Casey, Sean and Miao, Fei (2012) Investigating the feasibility of using asphalt pavements as a source of heating. In: 2nd International Symposium on Asphalt Pavements & Environment, 1-3 October 2012, Fortaleza, Brazil.

Dehdezi, Pejman Keikhaei, Hall, Matthew R. and Dawson, Andrew (2011) Enhancement of soil thermo-physical properties using microencapsulated phase change materials for ground source heat pump applications. Applied Mechanics and Materials, 110-116 . pp. 1191-1198. ISSN 1662-7482

Dehdezi, Pejman Keikhaei, Hall, Matthew R. and Dawson, Andrew (2011) Thermophysical optimization of specialized concrete pavement materials for collection of surface heat energy and applications for shallow heat storage. Transportation Research Record, 2240 . pp. 96-106. ISSN 2169-4052

Dehdezi, Pejman Keikhaei, Hall, Matthew R., Dawson, Andrew R. and Casey, Sean P. (2012) Thermal, mechanical and microstructural analysis of concrete containing microencapsulated phase change materials. International Journal of Pavement Engineering, 14 (5). pp. 449-462. ISSN 1477-268X

Delamere, Lise, Lumby, Andy, Treble, Peter and Golightly, David (2016) D-MOD Dynamic Modelling of Operator Demand: a new simulator module for the evaluation of signaler’s demand. In: 2016 IEEE International Conference on Intelligent Rail Transportation, 23-25 Aug 2016, Birmingham, UK.

Despeisse, M., Baumers, Martin, Brown, P., Charnley, F., Ford, S.J., Garmulewicz, A., Knowles, S., Minshall, T.H.W., Mortara, L., Reed-Tsochas, F.P. and Rowley, J. (2017) Unlocking value for a circular economy through 3D printing: a research agenda. Technological Forecasting and Social Change, 115 . pp. 75-84. ISSN 0040-1625

Dhowre, Hala S., Rajput, Sunil, Russell, Noah A. and Zelzer, Mischa (2015) Responsive cell–material interfaces. Nanomedicine, 10 (5). pp. 849-871. ISSN 1743-5889

Di Mino, Gaetano, Airey, Gordon, Di Paola, Mario, Pinnola, Francesco Paolo, D’Angelo, Giacomo and Presti, Davide Lo (2016) Linear and nonlinear fractional hereditary constitutive laws of asphalt mixtures. Journal of Civil Engineering and Management, 22 (7). pp. 882-889. ISSN 1822-3605

DiSciacca, Jack, Gomez, Carlos, Thompson, Adam, Lawes, Simon, Leach, Richard, Colonna de Lega, Xavier and de Groot, Peter (2017) True-color 3D surface metrology for additive manufacturing using interference microscopy. In: Joint Special Interest Group meeting between euspen and ASPE Dimensional Accuracy and Surface Finish in Additive Manufacturing, 10-12 October 2017, Leuven, Belgium.

Diaz, O. Gavalda, Axinte, D.A. and Novovic, D. (2018) Probabilistic modelling of tool unbalance during cutting of hard-heterogeneous materials: a case study in Ceramic Matrix Composites (CMCs). Composites Part B: Engineering, 148 . pp. 217-226. ISSN 1359-8368

Dowthwaite, Liz, Houghton, Robert J. and Mortier, Richard (2016) How relevant is copyright to online artists? A qualitative study of understandings, coping strategies and possible solutions. First Monday, 21 (5). ISSN 1396-0466

Doycheva, Kristina, Horn, Gordon, Koch, Christian, Schumann, Andreas and König, Markus (2017) Assessment and weighting of meteorological ensemble forecast members based on supervised machine learning with application to runoff simulations and flood warning. Advanced Engineering Informatics, 33 . pp. 427-439. ISSN 1474-0346

Doycheva, Kristina, Koch, Christian and König, Markus (2016) GPU-enabled pavement distress image classification in real time. Journal of Computing in Civil Engineering . ISSN 1943-5487 (In Press)

Dragone, Vincenza, Sans, Victor, Henson, Alon B., Granda, Jaroslaw M. and Cronin, Leroy (2017) An autonomous organic reaction search engine for chemical reactivity. Nature Communications, 8 . p. 15733. ISSN 2041-1723

Drouot, Adrien, Zhao, Ran, Irving, Lucas, Sanderson, David and Ratchev, Svetan (2018) Measurement assisted assembly for high accuracy aerospace manufacturing. In: 16th IFAC Symposium on Information Control Problems in Manufacturing (INCOM 2018), 11-13 June 2018, Bergamo, Italy.

Du, Heshan, Alechina, Natasha, Jackson, Mike and Hart, Glen (2016) A method for matching crowd-sourced and authoritative geospatial data. Transactions in GIS . ISSN 1361-1682

Du, Heshan, Nguyen, Hai Hoang, Alechina, Natasha, Logan, Brian, Jackson, Mike and Goodwin, John (2015) Using qualitative spatial logic for validating crowd-sourced geospatial data. In: Innovative Applications of Artificial Intelligence (IAAI-15), 25-29 Jan 2015, Austin, Texas, USA.

Dudziak, T., Hussain, Tanvir and Simms, N.J. (2016) High-temperature performance of ferritic steels in fireside corrosion regimes: temperature and deposits. Journal of Materials Engineering and Performance . ISSN 1544-1024

Duran Jimenez, G., Monti, Tamara, Titman, Jeremy J., Hernandez-Montoya, V., Kingman, S.W. and Binner, Eleanor (2017) New insights into microwave pyrolysis of biomass: preparation of carbon-based products from pecan nutshells and their application in wastewater treatment. Journal of Analytical and Applied Pyrolysis, 124 . pp. 113-121. ISSN 0165-2370

D’Angelo, G., Spogli, L., Cesaroni, C., Sgrigna, V., Alfonsi, L. and Aquino, M.H.O. (2015) GNSS data filtering optimization for ionospheric observation. Advances in Space Research, 56 (11). pp. 2552-2562. ISSN 1879-1948

D’Angelo, Giacomo, Elhussieny, Amal, Faisal, Marwa, Fahim, I.S. and Everitt, Nicola M. (2018) Mechanical behavior optimization of chitosan extracted from shrimp shells as a sustainable material for shopping bags. Journal of Functional Biomaterials, 9 (2). 37/1-37/10. ISSN 2079-4983

Eastwick, Carol, Simmons, K. and Al-Shibl, K. (2007) Modelling windage power loss from an enclosed spur gear. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 221 (3). pp. 331-341. ISSN 2041-2967

Egger, Adrian W., Chatzi, Eleni N. and Triantafyllou, Savvas P. (2017) An enhanced scaled boundary finite element method for linear elastic fracture. Archive of Applied Mechanics, 87 (10). pp. 1667-1706. ISSN 1432-0681

Egger, Adrian W., Triantafyllou, Savvas P. and Chatzi, Eleni N. (2016) The scaled boundary finite element method for the efficient modeling of linear elastic fracture. In: 9th International Conference on Fracture Mechanics of Concrete and Concrete Structures (FraMCoS-9), 28 May - 1 June 2016, Berkely, California, USA.

Eichhorn, Markus P., Ryding, Joseph, Smith, Martin J., Gil, Robin M.A., Siriwardena, Gavin M. and Fuller, Robert J. (2017) Effects of deer on woodland structure revealed through terrestrial laser scanning. Journal of Applied Ecology, 54 (6). pp. 1615-1626. ISSN 1365-2664

Ekberg, Peter, Su, Rong and Leach, Richard K. (2017) High-precision lateral distortion measurement and correction in coherence scanning interferometry using an arbitrary surface. Optics Express, 25 (16). pp. 18703-18712. ISSN 1094-4087

El-Nounu, AbdulRahman, Popov, Atanas and Ratchev, Svetan (2017) Redesign methodology for mechanical assembly. Research in Engineering Design . ISSN 0934-9839

Elmadih, Waiel A., Syam, Wahyudin P., Maskery, Ian and Leach, Richard (2017) Additively manufactured lattice structures for precision engineering applications. In: 32nd Annual Meeting of the American Society for Precision Engineering, October 29 – November 3, 2017, Charlotte, North Carolina, USA.

Elmer, Theo, Worall, Mark, Wu, Shenyi and Riffat, Saffa (2016) An experimental study of a novel integrated desiccant air conditioning system for building applications. Energy and Buildings, 111 . pp. 434-445. ISSN 1872-6178

Elmer, Theo, Worall, Mark, Wu, Shenyi and Riffat, Saffa (2015) Emission and economic performance assessment of a solid oxide fuel cell micro-combined heat and power system in a domestic building. Applied Thermal Engineering, 90 . pp. 1082-1089. ISSN 1873-5606

Elmer, Theo, Worall, Mark, Wu, Shenyi and Riffat, Saffa (2015) Fuel cell technology for domestic built environment applications: state of-the-art review. Renewable and Sustainable Energy Reviews, 42 . pp. 913-931. ISSN 1364-0321

Elphick, D., Ajayi, O., Everitt, N.M. and Voisey, K.T. (2015) Green corrosion inhibitors: amino acids and plant extracts. In: European Federation of Corrosion Congress (Eurocorr 2015), 6-10 September 2015, Graz, Austria.

Evans, A.D., Qian, C.C., Turner, T.A., Harper, L.T. and Warrior, N.A. (2016) Flow characteristics of carbon fibre moulding compounds. Composites Part A: Applied Science and Manufacturing, 90 . pp. 1-12. ISSN 1359-835X

Evans, Paul L., Castellazzi, Alberto and Johnson, C. Mark (2016) Design tools for rapid multidomain prototyping of power electronic systems. IEEE Transactions on Power Electronics, 31 (3). pp. 2443-2455. ISSN 0885-8993

Ezeh, Collins I., Tomatis, Marco, Yang, Xiaogang, He, Jun and Sun, Chenggong (2018) Ultrasonic and hydrothermal mediated synthesis routes for functionalized Mg-Al LDH: Comparison study on surface morphology, basic site strength, cyclic sorption efficiency and effectiveness. Ultrasonics Sonochemistry, 40 (A). pp. 341-352. ISSN 1873-2828

Fadoul, Abdelaziz H. and Tizani, Walid (2017) Evaluation of current practice and associated challenges towards integrated design. Advances in Computational Design, 2 (2). pp. 89-105. ISSN 2466-0523

Fallows, Daniel, Nuzzo, Stefano, Costabeber, Alessando and Galea, Michael (2018) Harmonic reduction methods for electrical generation: a review. IET Generation, Transmission & Distribution . ISSN 1751-8695

Faludi, Jeremy, Baumers, Martin, Maskery, Ian and Hague, Richard (2016) Environmental impacts of selective laser melting: do printer, powder, or power dominate? Journal of Industrial Ecology . ISSN 1530-9290

Fang, Y., Jayasuriya, D., Furniss, D., Tang, Z.Q., Sojka, Ł., Markos, C., Sujecki, S., Seddon, A.B. and Benson, T.M. (2017) Determining the refractive index dispersion and thickness of hot-pressed chalcogenide thin films from an improved Swanepoel method. Optical and Quantum Electronics . ISSN 1572-817X (In Press)

Fang, Y., Sójka, L., Jayasuriya, D., Furniss, David, Tang, Z.Q., Markos, C., Sujecki, S., Seddon, Angela B. and Benson, Trevor M. (2016) Characterising refractive index dispersion in chalcogenide glasses. In: 18th International Conference on Transparent Optical Networks, 10-14 July 2016, Trento, Italy.

Fanicchia, F. and Axinte, D.A. (2018) Transient three-dimensional geometrical/thermal modelling of thermal spray: normal-impinging jet and single straight deposits. International Journal of Heat and Mass Transfer, 122 . pp. 1327-1342. ISSN 0017-9310

Fanicchia, F., Maeder, X., Ast, J., Taylor, A.A., Guo, Y., Polyakov, M.N., Michler, J. and Axinte, D.A. (2018) Residual stress and adhesion of thermal spray coatings: microscopic view by solidification and crystallisation analysis in the epitaxial CoNiCrAlY single splat. Materials & Design, 153 . pp. 36-46. ISSN 0264-1275

Farrant, Andrew R., Noble, Stephen R., Barron, A.J. Mark, Self, Charles A. and Grebby, Stephen (2014) Speleothem U-series constraints on scarp retreat rates and landscape evolution: an example from the Severn valley and Cotswold Hills gull-caves, UK. Journal of the Geological Society, 172 . pp. 63-76. ISSN 0016-7649

Faug, T., Turnbull, Barbara and Gauer, P. (2018) Looking beyond the powder/dense flow avalanche dichotomy. Journal of Geophysical Research: Earth Surface, 123 (6). pp. 1183-1186. ISSN 2169-9011

Fay, Mike W., Han, Y., Novikov, Sergei V., Edmonds, K.W., Gallagher, B.L., Campion, R.P., Staddon, C.R., Foxon, C.T. and Brown, Paul D. (2008) Nanoscale characterisation of MBE-grown GaMnN / (001) GaAs. In: Microscopy of semiconducting materials 2007: proceedings of the 15th conference, 2-5 April 2007, Cambridge, UK. Springer proceedings in physics (120). Springer-Verlag, Dordrecht, pp. 103-106. ISBN 9781402086144

Fecarotti, C. and Andrews, J. (2017) Optimising strategy selection for the management of railway assets. In: Stephenson Conference : Research for Railways, 25th-27th April 2017, London, United Kingdom.

Fecarotti, Claudia and Andrews, John (2018) A mathematical programming approach to railway network asset management. In: ESREL 2018, 17-21 Jun 2018, Trondheim, Norway.

Fecarotti, Claudia and Andrews, John (2016) Performance modelling of fuel cell systems through Petri nets. In: IEEE Proceedings of the 2016 Annual Reliability and Maintainability Symposium (RAMS), 25-28 Jan 2016, Tucson, USA.

Felfel, R.M., Poocza, Leander, Gimeno-Fabra, Miquel, Milde, Tobias, Hildebrand, Gerhard, Ahmed, Ifty, Scotchford, Colin, Sottile, Virginie, Grant, David M. and Liefeith, Klaus (2016) In vitro degradation and mechanical properties of PLA-PCL copolymer unit cell scaffolds generated by two-photon polymerization. Biomedical Materials, 11 (1). 015011. ISSN 1748-605X

Felli, Paolo, Logan, Brian and Sardina, Sebastian (2016) Parallel behavior composition for manufacturing. In: 25th International Joint Conference on Artificial Intelligence, 9-13 July 2016, New York, NY.

Fendi, Karwan Ghazi, Adam, Sarhat Mustafa, Kokkas, Nikolaos and Smith, Martin John (2014) An approach to produce a GIS database for road surface monitoring. In: 2nd International Conference on Civil Engineering (ICCEN 2013), 13-14 Dec 2013, Stockholm, Sweden.

Feng, Xiaobing, Su, Rong, Happonen, Tuomas, Liu, Jian and Leach, Richard (2018) Fast and cost-effective in-process defect inspection for printed electronics based on coherent optical processing. Optics Express, 26 (11). pp. 13927-13937. ISSN 1094-4087

Feng, Xiaobing, Su, Rong, Liu, Mingyu and Leach, Richard K. (2017) Optical difference engine for defect inspection in highly-parallel manufacturing processes. In: 12th International Conference and Exhibition on Laser Metrology, Coordinate Measuring Machine and Machine Tool Performance, (LAMDAMAP 2017), 15-16 March, 2017, Renishaw Innovation Centre, Wotton-under-Edge , United Kingdom.

Ferrari-John, R.S., Katrib, Juliano, Palade, Paula, Batchelor, A.R., Dodds, Chris and Kingman, S.W. (2016) A tool for predicting heating uniformity in industrial radio frequency processing. Food and Bioprocess Technology . ISSN 1935-5130

Ferrari-John, R.S., Katrib, Juliano, Zerva, Evgenia, Davies, Nigel, Cook, David J., Dodds, Chris and Kingman, S.W. (2016) Electromagnetic heating for industrial kilning of malt: a feasibility study. Food and Bioprocess Technology . ISSN 1935-5130

Figueiredo e Silva, Pedro, Basiri, Anahid, Lohan, Elena Simona, Pinchin, James, Hill, Chris and Moore, Terry (2015) On the impact of intra-system interference for ranging and positioning with Bluetooth low energy. In: 5th International Workshop on Mobile Entity Localization and Tracking in GPS-Less Environments (MELT 2015), 3-6 Nov 2015, Seattle, Washington, USA.

Fisher, Oliver, Watson, Nicholas, Porcu, Laura, Bacon, Darren, Rigley, Martin and Gomes, R.L. (2018) Cloud manufacturing as a sustainable process manufacturing route. Journal of Manufacturing Systems, 47 . pp. 53-68. ISSN 0278-6125

Fitzgerald, Elizabeth, Taylor, Claire and Craven, Michael P. (2013) To the Castle! A comparison of two audio guides to enable public discovery of historical events. Personal and Ubiquitous Computing, 17 (4). pp. 749-760. ISSN 1617-4909

Foster, M.R. and Munro, Richard J. (2012) The linear spin-up of a stratified, rotating fluid in a square cylinder. Journal of Fluid Mechanics, 712 . pp. 7-40. ISSN 1469-7645

Franza, A., Marshall, Alec M. and Zhou, B. (2018) Greenfield tunnelling in sands: the effects of soil density and relative depth. Geotechnique . pp. 1-11. ISSN 1751-7656

Fry, Christopher M.P., Grant, David M. and Walker, Gavin S. (2014) Catalysis and evolution on cycling of nano-structured magnesium multilayer thin films. International Journal of Hydrogen Energy, 39 (2). pp. 1173-1184. ISSN 0360-3199

Fu, Rong, Yan, Yuying, Roberts, Clive, Liu, Zeyu and Chen, Yiyi (2018) The role of dipole interactions in hyperthermia heating colloidal clusters of densely-packed superparamagnetic nanoparticles. Scientific Reports, 8 (1). p. 4704. ISSN 2045-2322

Fuentes-Domínguez, Rafael, Smith, Richard J., Pérez-Cota, Fernando, Marques, Leonel, Peña-Rodríguez, Ovidio and Clark, Matt (2017) Size characterisation method and detection enhancement of plasmonic nanoparticles in a pump–probe system. Applied Sciences, 7 (8). 819/1-819/12. ISSN 2076-3417

Fujimoto, Satomi, Cameron, Jamie M., Wei, Rong Jia, Kastner, Katharina, Robinson, David, Sans, Victor, Newton, Graham N. and Oshio, Hiroki (2017) A simple approach to the Visible-light photoactivation of molecular metal oxides. Inorganic Chemistry . ISSN 1520-510X

Galan, Ana-Maria, Calinescu, Ioan, Trifan, Adrian, Winkworth-Smith, Charles, Calvo-Carrascal, Miguel, Dodds, Chris and Binner, Eleanor (2017) New insights into the role of selective and volumetric heating during microwave extraction: investigation of the extraction of polyphenolic compounds from sea buckthorn leaves using microwave-assisted extraction and conventional solvent extraction. Chemical Engineering & Processing: Process Intensification, 116 . pp. 29-39. ISSN 0255-2701

Gallagher, Michael, Beard, Maria, Clifford, M.J. and Watson, M.C. (2016) An evaluation of a biomass stove safety protocol used for testing household cookstoves, in low-middle income countries. Energy for Sustainable Development, 33 . pp. 14-25. ISSN 0973-0826

Gan, Guohui (2016) Dynamic thermal simulation of ground heat exchangers for renewable heating of buildings. In: International Symposium of Heat Transfer and Heat Powered Cycle 2016, 26-29 June 2016, Nottingham, UK.

Gan, Guohui (2014) Dynamic interactions between the ground heat exchanger and environments in earth–air tunnel ventilation of buildings. Energy and Buildings, 85 . pp. 12-22. ISSN 0378-7788

Gan, Guohui (2013) Dynamic thermal modelling of horizontal ground-source heat pumps. International Journal of Low-Carbon Technologies, 8 (2). pp. 95-105. ISSN 1748-1317

Gan, Yunhua, Zhang, Xia, Li, Haige, Tong, Yang, Shi, Yanling and Yan, Yuying (2017) The atomization current and droplet size of ethanol in two different small-scale electro-spraying systems. Journal of Electrostatics, 87 . pp. 228-235. ISSN 0304-3886

Gao, Xi, Chen, Menghao, Yang, Xiaogang, Harper, Lee, Ahmed, Ifty and Lu, Jiawa (2018) Simulating damage onset and evolution in fully bio-resorbable composite under three-point bending. Journal of the Mechanical Behavior of Biomedical Materials, 81 . pp. 72-82. ISSN 1751-6161

Garcia, Alvaro, Hassn, Abdushaffi, Chiarelli, Andrea and Dawson, Andrew (2015) Multivariable analysis of potential evaporation from moist asphalt mixture. Construction and Building Materials, 98 . pp. 80-88. ISSN 1879-0526)

Garibaldi, Michele, Ashcroft, Ian, Simonelli, Marco and Hague, Richard (2016) Metallurgy of high-silicon steel parts produced using selective laser melting. Acta Materialia, 110 . pp. 207-216. ISSN 1359-6454

Gasper, A.N.D., Catchpole-Smith, S. and Clare, Adam T. (2017) In-situ synthesis of titanium aluminides by direct metal deposition. Journal of Materials Processing Technology, 239 . pp. 230-239. ISSN 0924-0136

Gavaldà Díaz, O. and Axinte, Dragos A. (2017) Towards understanding the cutting and fracture mechanism in ceramic matrix composites. International Journal of Machine Tools and Manufacture . ISSN 0890-6955 (In Press)

Gazzana, Daniel S., Tronchoni, Alex B., Leborgne, Roberto C., Bretas, Arturo S., Thomas, Dave W. P. and Christopoulos, Christos (2018) An improved soil ionization representation to numerical simulation of impulsive grounding systems. IEEE Transactions on Magnetics, 54 (3). p. 7200204. ISSN 0018-9464

Gee, David, Bateson, Luke, Sowter, Andrew, Grebby, Stephen, Novellino, Alessandro, Cigna, Francesca, Marsh, Stuart, Banton, Carl and Wyatt, Lee (2017) Ground motion in areas of abandoned mining: application of the intermittent SBAS (ISBAS) to the Northumberland and Durham coalfield, UK. Geosciences, 7 (3). p. 85. ISSN 2076-3263

Gee, David, Sowter, Andrew, Novellino, Alessandro, Marsh, Stuart and Gluyas, Jon (2016) Monitoring land motion due to natural gas extraction: validation of the intermittent SBAS (ISBAS) DInSAR algorithm over gas fields of North Holland, the Netherlands. Marine and Petroleum Geology . ISSN 1873-4073 (In Press)

Giuliani, F., Dipankar, D., Delmonte, N., Castellazzi, Alberto and Cova, P. (2014) Robust snubberless soft-switching power converter using SiC power MOSFETs and bespoke thermal design. Microelectronics Reliability, 54 (9-10). pp. 1916-1920. ISSN 0026-2714

Gkanas, Evangelos I., Grant, David M., Stuart, Alastair D., Eastwick, Carol, Book, D., Nayebossadri, S., Pickering, L. and Walker, Gavin S. (2015) Numerical study on a two-stage metal hydride hydrogen compression system. Journal of Alloys and Compounds, 645 (Supp1). S18-S22. ISSN 1873-4669

Glassock, Richard, Galea, Michael, Williams, Warren and Glesk, Tibor (2017) Hybrid electric aircraft propulsion case study for skydiving mission. Aerospace, 4 (3). p. 45. ISSN 2226-4310

Glassock, Richard, Galea, Michael, Williams, Warren and Glesk, Tibor (2017) Hybrid electric propulsion systems for skydiving aircraft. In: MEA 2017 More Electric Aircraft, 1-2 February 2017, Bordeaux, France. (Unpublished)

Gleadall, Andrew, Ashcroft, Ian and Segal, Joel (2018) VOLCO: a predictive model for 3D printed microarchitecture. Additive Manufacturing, 21 . pp. 605-618. ISSN 2214-8604

Goel, A., Uth, T., Liu, Tao, Wadley, H.N.G. and Deshpande, V.S. (2018) Coupled discrete/continuum simulations of the impact of granular slugs with clamped beams: stand-off effects. Mechanics of Materials, 116 . pp. 90-103. ISSN 1872-7743

Goel, Himanshu, Ling, Sanliang, Ellis, Breanna Nicole, Taconi, Anna, Slater, Ben and Rai, Neeraj (2018) Predicting vapor liquid equilibria using density functional theory: a case study of argon. Journal of Chemical Physics, 148 (22). 224501/1-224501/10. ISSN 1089-7690

Golightly, David and Dadashi, Nastaran (2016) How do principles for human-centred automation apply to Disruption Management Decision Support? In: 2016 IEEE International Conference on Intelligent Rail Transportation, 23-25 Aug 2016, Birmingham, UK. (In Press)

Golightly, David, Kefalidou, Genovefa and Sharples, Sarah (2017) A cross-sector analysis of human and organisational factors in the deployment of data-driven predictive maintenance. Information Systems and e-Business Management . ISSN 1617-9854

Golightly, David, Sanderson, David, Holmes, Paul, Ratchev, Svetan and Sharples, Sarah (2016) Design requirements for effective hybrid decision making with Evolvable Assembly Systems. In: European Conference on Cognitive Ergonomics, 6-8 Sep 2016, Nottingham, UK.

Golightly, David, Sharples, Sarah, Patel, Harshada and Ratchev, Svetan (2016) Manufacturing in the cloud: a human factors perspective. International Journal of Industrial Ergonomics, 55 . pp. 12-21. ISSN 0169-8141

Gomes, S., Dias-da-Costa, D., Neves, L.A.C., Hadigheh, S.A., Fernandes, P. and Júlio, E. (2018) Probabilistic-based characterisation of the mechanical properties of CFRP laminates. Construction and Building Materials, 169 . pp. 132-141. ISSN 1879-0526

Gomez, Carlos, Su, Rong, Thompson, Adam, DiSciacca, Jack, Lawes, Simon and Leach, Richard K. (2017) Optimisation of surface measurement for metal additive manufacturing using coherence scanning interferometry. Optical Engineering, 56 (11). 111714/1-111714/8. ISSN 1560-2303

Gommer, F., Endruweit, A. and Long, A.C. (2016) Quantification of micro-scale variability in fibre bundles. Composites Part A: Applied Science and Manufacturing, 87 . pp. 131-137. ISSN 1359-835X

Gong, W., Yan, Y.Y., Chen, S. and Wright, E. (2018) A modified phase change pseudopotential lattice Boltzmann model. International Journal of Heat and Mass Transfer, 125 . pp. 323-329. ISSN 0017-9310 (In Press)

Gong, Wei, Chen, Sheng and Yan, Yuying (2017) A thermal immiscible multiphase flow simulation by lattice Boltzmann method. International Communications in Heat and Mass Transfer, 88 . pp. 136-138. ISSN 0735-1933

Gong, Wei, Yan, Yuying and Chen, Sheng (2018) A study on the unphysical mass transfer of SCMP pseudopotential LBM. International Journal of Heat and Mass Transfer, 123 . pp. 815-820. ISSN 0017-9310

Gong, Wei, Yan, Yuying, Chen, Sheng and Giddings, Donald (2017) Numerical study of wetting transitions on biomimetic surfaces using a lattice Boltzmann approach with large density ratio. Journal of Bionic Engineering, 14 (3). pp. 486-496. ISSN 1672-6529

Gong, Wei, Zu, Yingqing, Chen, Sheng and Yan, Yuying (2017) Wetting transition energy curves for a droplet on a square-post patterned surface. Science Bulletin, 62 (2). pp. 136-142. ISSN 2095-9273

Gourley, Jonathan J., Flamig, Zachary L., Vergara, Humberto, Kirstetter, Pierre-Emmanuel, Clark, Robert A., Argyle, Elizabeth, Arthur, Ami, Martinaitis, Steven, Terti, Galateia, Erlingis, Jessica M., Hong, Yang and Howard, Kenneth W. (2017) The FLASH project: improving the tools for flash flood monitoring and prediction across the United States. Bulletin of the American Meteorological Society, 98 (2). pp. 361-372. ISSN 0003-0007

Gradoni, Gabriele, Arnault, Luk R., Creagh, Stephen C., Tanner, Gregor, Baharuddin, Mohd Hafiz, Smartt, Christopher and Thomas, David W.P. (2017) Wigner function based propagation of stochastic field emissions from planar electromagnetic sources. IEEE Transactions on Electromagnetic Compatibility . ISSN 0018-9375 (In Press)

Graham, Shalini, Eastwick, Carol, Snape, Colin and Quick, Will (2017) Mechanical degradation of biomass wood pellets during long term stockpile storage. Fuel Processing Technology, 160 . pp. 143-151. ISSN 0378-3820

Graham, Shalini L., Ogunfayo, Ibrahim, Hall, Matthew R., Snape, Colin, Quick, Will, Weatherstone, Susan and Eastwick, Carol (2016) Changes in the mechanical properties of biomass wood pellets during artificial degradation in a laboratory environment. Fuel Processing Technology . ISSN 0378-3820

Grebby, Stephen, Cunningham, Dickson, Naden, Jonathan and Tansey, Kevin (2012) Application of airborne LiDAR data and airborne multispectral imagery to structural mapping of the upper section of the Troodos ophiolite, Cyprus. International Journal of Earth Sciences, 101 (6). pp. 1645-1660. ISSN 1437-3262

Grebby, Stephen, Cunningham, Dickson, Naden, Jonathan and Tansey, Kevin (2010) Lithological mapping of the Troodos ophiolite, Cyprus, using airborne LiDAR topographic data. Remote Sensing of Environment, 114 (4). pp. 713-724. ISSN 1879-0704

Grebby, Stephen, Cunningham, Dickson, Tansey, Kevin and Naden, Jonathan (2014) The impact of vegetation on lithological mapping using airborne multispectral data: a case study for the North Troodos Region, Cyprus. Remote Sensing, 6 (11). pp. 10860-10887. ISSN 2072-4292

Grebby, Stephen, Field, Elena and Tansey, Kevin (2016) Evaluating the use of an object-based approach to lithological mapping in vegetated terrain. Remote Sensing, 8 (10). 843/1-843/20. ISSN 2072-4292

Grebby, Stephen, Naden, Jonathan, Cunningham, Dickson and Tansey, Kevin (2011) Integrating airborne multispectral imagery and airborne LiDAR data for enhanced lithological mapping in vegetated terrain. Remote Sensing of Environment, 115 (1). pp. 214-226. ISSN 0034-4257

Grejner-Brzezinska, Dorota A., Toth, Charles K., Moore, Terry, Raquet, John F., Miller, Mikel M. and Kealy, Allison (2016) Multisensor navigation systems: a remedy for GNSS vulnerabilities? Proceedings of the IEEE, 104 (6). pp. 1339-1353. ISSN 0018-9219

Griffin, J.W. and Popov, A.A. (2017) Multibody dynamics simulation of an all-wheel-drive motorcycle for handling and energy efficiency investigations. Vehicle System Dynamics . ISSN 0042-3114

Grubb, Mark, Carpenter, James, Crowe, John A., Teoh, Jeremy, Marlow, Neil, Ward, Carole, Mann, Chantelle, Sharkey, Don and Hayes-Gill, Barrie R. (2014) Forehead reflectance photoplethysmography to monitor heart rate: preliminary results from neonatal patients. Physiological Measurement, 35 (5). pp. 881-893. ISSN 0967-3334

Guan, Guangying, Hirsch, Matthias, Syam, Wahyudin P., Leach, Richard K., Huang, Zhihong and Clare, Adam T. (2016) Loose powder detection and surface characterization in selective laser sintering via optical coherence tomography. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 472 (2191). 20160201/1-20160201/14. ISSN 1471-2946

Gunasekera, Deshani H.A.T., Kuek, SzeLee, Hasanaj, Denis, He, Yinfeng, Tuck, Christopher, Croft, Anna K. and Wildman, Ricky D. (2016) Three dimensional ink-jet printing of biomaterials using ionic liquids and co-solvents. Faraday Discussions, 190 . pp. 509-523. ISSN 1364-5498

Guo, Liang, Yan, Yuying, Sun, Wanchen and Zhu, Jie (2017) Numerical investigation of flow unsteadiness and heat transfer on suction surface of rotating airfoils within a gas turbine cascade. Propulsion and Power Research . ISSN 2212-540X

Gómez, Carlos A., Su, Rong, Thompson, Adam, DiSciacca, Jack, Lawes, Simon and Leach, Richard K. (2017) Optimisation of surface topography characterisation for metal additive manufacturing using coherence scanning interferometry. In: Joint Special Interest Group meeting between euspen and ASPE Dimensional Accuracy and Surface Finish in Additive Manufacturing, 10-12 October 2017, Leuven, Belgium.

Gómez, Xiomar, Meredith, William, Fernández, Camino, Sánchez-García, Mario, Díez-Antolínez, Rebeca, Garzón-Santos, Jorge and Snape, Collin E. (2018) Evaluating the effect of biochar addition on the anaerobic digestion of swine manure: application of Py-GC/MS. Environmental Science and Pollution Research . ISSN 0944-1344

Habibi, Hossein, Land, Patrick, Ball, Michael J., Troncoso, David Alatorre and Branson, David T. (2018) Optimal integration of pneumatic artificial muscles with vacuum-jammed surfaces to characterise a novel reconfigurable moulding system. Journal of Manufacturing Processes, 32 . pp. 241-253. ISSN 1878-6642

Haji, Twana, Marshall, Alec M. and Tizani, Walid (2018) A cantilever approach to estimate bending stiffness of buildings affected by tunnelling. Tunnelling and Underground Space Technology, 71 . pp. 47-61. ISSN 0886-7798

Hale, Jonathan (2017) Merleau-Ponty for architects. Thinkers for architects . Routledge, London. ISBN 9780415480710 (Submitted)

Hale, Jonathan (2015) Found spaces and material memory: remarks on the thickness of time in architecture. In: The material imagination: reveries on architecture and matter. Ashgate, Farnham, Surrey, pp. 169-180. ISBN 978-1-4724-2458-7

Hall, Matthew R., Dehdezi, Pejman Keikhaei, Dawson, Andrew R., Grenfell, James and Isola, Riccardo (2012) Influence of the thermophysical properties of pavement materials on the evolution of temperature depth profiles in different climatic regions. Journal of Materials in Civil Engineering, 24 (1). pp. 32-47. ISSN 1943-5533

Hamad, W.I., Owen, J.S. and Hussein, M.F.M. (2015) Modelling the degradation of vibration characteristics of reinforced concrete beams due to flexural damage. Structural Control and Health Monitoring, 22 (6). pp. 939-967. ISSN 1545-2255

Hamid, Hazren A., Jenidi, Youla, Thielemans, Wim, Somerfield, Christopher and Gomes, Rachel L. (2016) Predicting the capability of carboxylated cellulose nanowhiskers for the remediation of copper from water using response surface methodology (RSM) and artificial neural network (ANN) models. Industrial Crops and Products, 93 . pp. 108-120. ISSN 0926-6690

Hargreaves, David, Kakimpa, Bruce and Owen, John S. (2014) The computational fluid dynamics modelling of the autorotation of square, flat plates. Journal of Fluids and Structures, 46 . pp. 111-133. ISSN 1095-8622

Harper, L.T., Qian, C.C., Luchoo, R. and Warrior, N.A. (2016) 3D geometric modelling of discontinuous fibre composites using a force-directed algorithm. Journal of Composite Materials . ISSN 1530-793X

Hasan, Ahmed, Bennett, Chris, Shipway, P.H., Cater, S. and Martin, J. (2017) A numerical methodology for predicting tool wear in Friction Stir Welding. Journal of Materials Processing Technology, 241 . pp. 129-140. ISSN 0924-0136

Hashemzadeh, M., Powell, J. and Voisey, K.T. (2014) Fibre laser piercing of mild steel: the effects of power intensity, gas type and pressure. Optics and Lasers in Engineering, 55 . pp. 143-149. ISSN 0143-8166

Hashemzadeh, M., Suder, W, Williams, S., Powell, J., Kaplan, A.F.H. and Voisey, K.T. (2014) The application of specific point energy analysis to laser cutting with 1 μm laser radiation. Physics Procedia, 56 . pp. 909-918. ISSN 1875-3892

Hassn, Abdushaffi, Chiarelli, Andrea, Dawson, Andrew and Garcia, Alvaro (2016) Thermal properties of asphalt pavements under dry and wet conditions. Materials & Design, 91 . pp. 432-439. ISSN 0264-1275

Hassn, Abdushafi, Aboufoul, M., Wu, Y., Dawson, Andrew and Garcia, Alvaro (2016) Effect of air voids content on thermal properties of asphalt mixtures. Construction and Building Materials, 115 . pp. 327-335. ISSN 1879-0526

Hayes, E.K. and Shipway, P.H. (2017) Effect of test conditions on the temperature at which a protective debris bed is formed in fretting of a high strength steel. Wear, 376-377 (B). pp. 1460-1466. ISSN 0043-1648

Hazzard, Adrian, Benford, Steve and Burnett, Gary (2014) You’ll never walk alone: designing a location-based soundtrack. In: 14th International Conference on New Interfaces for Musical Expression, 30 June - 4 July 2014, London, UK.

Heath, Lindy, Zhu, Lifan and Thielemans, Wim (2013) Chitin nanowhisker aerogels. ChemSusChem, 6 (3). pp. 537-544. ISSN 1864-5631

Helal, M.A., Bull, S., Kaunga-Nyirenda, S.N., Lim, J.J. and Larkins, E.C. (2015) Self-consistent simulation of high-brightness diode lasers with external optical feedback. In: 2015 IEEE High Power Diode Lasers and Systems Conference (HPD), 14-15 October 2015, Coventry, United Kingdom.

Heller, Valentin (2017) Scale effects in shallow-water vortices. In: 4th International Symposium on Shallow Flows (4th ISSF), 26-28 June 2017, Eindhoven, Netherlands.

Heller, Valentin (2015) Composite modelling of the effect of the water body geometry on landslide-tsunamis. In: 36th IAHR World Congress, 28 Jun - 03 Jul 2015, Delft, the Netherlands.

Heller, Valentin and Spinneken, Johannes (2015) On the effect of the water body geometry on landslide–tsunamis: physical insight from laboratory tests and 2D to 3D wave parameter transformation. Coastal Engineering, 104 . pp. 113-134. ISSN 0378-3839

Hermawati, Setia and Lawson, Glyn (2016) Establishing usability heuristics for heuristics evaluation in a specific domain: is there a consensus? Applied Ergonomics, 56 . pp. 34-51. ISSN 1872-9126

Hermawati, Setia and Lawson, Glyn (2014) Managing obesity through mobile phone applications: a state-of-the-art review from a user-centred design perspective. Personal and Ubiquitous Computing, 18 (8). pp. 2003-2023. ISSN 1617-4917

Hermawati, Setia, Lawson, Glyn, D'Cruz, Mirabelle, Arlt, Frank, Apold, Judith, Andersson, Lina, Lövgren, Maria Gink and Malmsköld, Lennart (2015) Understanding the complex needs of automotive training at final assembly lines. Applied Ergonomics, 46,Pt.A . pp. 144-157. ISSN 0003-6870

Hermawati, Setia, Lawson, Glyn and Sutarto, Auditya Purwandini (2014) Mapping ergonomics application to improve SMEs working condition in industrially developing countries: a critical review. Ergonomics, 57 (12). pp. 1771-1794. ISSN 0014-0139

Heron, Charles, Haigh, S.K. and Madabhushi, S.P.G. (2015) A new macro-element model encapsulating the dynamic moment-rotation behaviour of raft foundations. Geotechnique, 65 (5). pp. 442-451. ISSN 1751-7656

Hewitt, Joseph, Ray, Charlotte, Jewitt, Sarah and Clifford, Mike (2018) Finance and the improved cookstove sector in East Africa: barriers and opportunities for value-chain actors. Energy Policy, 117 . pp. 127-135. ISSN 0301-4215

Hirsch, Matthias, Catchpole-Smith, S., Patel, R., Marrow, P., Li, Wenqi, Tuck, C., Sharples, Steve D. and Clare, Adam T. (2017) Meso-scale defect evaluation of selective laser melting using spatially resolved acoustic spectroscopy. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 473 (2205). pp. 1-11. ISSN 1471-2946

Hirsch, Matthias, Dryburgh, Paul, Catchpole-Smith, Sam, Patel, Rikesh, Parry, Luke Alexander, Sharples, Steve D., Ashcroft, Ian A. and Clare, Adam T. (2018) Targeted rework strategies for powder bed additive manufacture. Additive Manufacturing, 19 . pp. 127-133. ISSN 2214-8604

Hirsch, Matthias, Patel, Rikesh, Li, Wenqi, Guan, Guangying, Leach, Richard K., Sharples, Steve D. and Clare, Adam T. (2016) Assessing the capability of in-situ nondestructive analysis during layer based additive manufacture. Additive Manufacturing . ISSN 2214-8604 (In Press)

Holland, Sonia, Tuck, Christopher and Foster, Tim (2018) Selective recrystallization of cellulose composite powders and microstructure creation through 3D binder jetting. Carbohydrate Polymers . ISSN 1879-1344 (In Press)

Holland, Sonia, Tuck, Christopher and Foster, Tim (2018) Fluid gels: a new feedstock for high viscosity jetting. Food Biophysics, 13 (2). pp. 175-185. ISSN 1557-1866

Hong, Jiaju, Liu, Sheng, Glover, Paul, Wu, Shenyi and Yan, Yuying (2017) Mathematical and experimental investigation of water migration in plant xylem. Journal of Bionic Engineering, 14 (4). pp. 622-630. ISSN 1672-6529

Hong, Jiaju, Liu, Sheng, Yan, Yuying and Glover, Paul (2017) Experimental measurement of dynamic concentration of nanofluid in laminar flow. Experimental Thermal and Fluid Science, 88 . pp. 483-489. ISSN 0894-1777

Hossain, Kazi M. Zakir, Patel, Uresha and Ahmed, Ifty (2015) Development of microspheres for biomedical applications: a review. Progress in Biomaterials, 4 (1). pp. 1-19. ISSN 2194-0517

Hossain, Syed T., McWilliam, Stewart and Popov, Atanas A. (2016) An investigation on thermoelastic damping of high-Q ring resonators. International Journal of Mechanical Sciences, 106 . pp. 209-219. ISSN 0020-7403

Houlston, Paul Robert (2006) Extracting Second Order System Matrices from State Space System. pp. 1147-1149.

Howard, Sam, Lang, Alexandra, Patel, Mitesh Dilipkumar Kantilal, Sharples, Sarah and Shaw, Dominick E. (2014) Electronic monitoring of adherence to inhaled medication in asthma. Current Respiratory Medicine Reviews, 10 (1). pp. 50-63. ISSN 1875-6387

Howard, Sam, Lang, Alexandra. R., Sharples, Sarah and Shaw, Dominick E. (2016) See I told you I was taking it! - attitudes of adolescents with asthma towards a device monitoring their inhaler use: Implications for future design. Applied Ergonomics . ISSN 0003-6870 (In Press)

Hromadka, Jiri, Korposh, Sergiy, Partridge, Matthew, James, Stephen, Davis, Frank, Charlton, Alex, Crump, Derrick and Tatam, Ralph (2017) Volatile organic compounds sensing with use of fibre optic sensor with long period grating and mesoporous nano-scale coating. Sensors, 17 (2). 205/1-2015/16. ISSN 1424-8220

Hu, Di, Xiao, Wei and Chen, George Zheng (2013) Near-net-shape production of hollow titanium alloy components via electrochemical reduction of metal oxide precursors in molten salts. Metallurgical and Materials Transactions B, 44 (2). pp. 272-282. ISSN 1073-5615

Hu, Yukun, Wang, Jihong, Tan, C.K., Sun, Chenggong and Liu, Hao (2017) Further improvement of fluidized bed models by incorporating zone method with Aspen Plus interface. Energy Procedia, 105 . pp. 1895-1901. ISSN 1876-6102

Huang, Kuo, Li, Bo, Yan, Yuying, Li, Yong, Twaha, Ssennoga and Zhu, Jie (2017) A comprehensive study on a novel concentric cylindrical thermoelectric power generation system. Applied Thermal Engineering, 117 . pp. 501-510. ISSN 1873-5606

Huang, Kuo, Yan, Yuying, Li, Bo, Li, Yong, Li, Kai and Li, Jun (2018) A novel design of thermoelectric generator for automotive waste heat recovery. Automotive Innovation, 1 (1). pp. 54-61. ISSN 2096-4250

Huddle, Thomas, Langston, Paul and Lester, Edward (2018) Bayesian deconvolution of vessel residence time distribution. International Journal of Chemical Reactor Engineering, 16 (4). pp. 1-16. ISSN 1542-6580

Hui, D., Goodridge, R.D., Scotchford, C.A. and Grant, D.M. (2018) Laser sintering of nano-hydroxyapatite coated polyamide 12 powders. Additive Manufacturing, 22 . pp. 560-570. ISSN 2214-8604

Hüsler, Amanda, Haas, Simon, Parry, Luke, Romero, Manuel, Nisisako, Takasi, Williams, Paul, Wildman, Ricky D. and Alexander, Morgan R. (2018) Effect of surfactant on Pseudomonas aeruginosa colonization of polymer microparticles and flat films. RSC Advances, 8 (28). pp. 15352-15357. ISSN 2046-2069

Idinyang, Solomon, Franza, Andrea, Heron, Charles M. and Marshall, Alec M. (2018) Real-time data coupling for hybrid testing in a geotechnical centrifuge. International Journal of Physical Modelling in Geotechnics . ISSN 2042-6550

Incelli, Giorgio, Briganti, Riccardo and Dodd, Nicholas (2015) Absorbing–generating seaward boundary conditions for fully-coupled hydro-morphodynamical solvers. Coastal Engineering, 99 . pp. 96-108. ISSN 0378-3839

Isa, Khairuddin Md, Snape, Colin E., Uguna, Clement N., Meredith, Will and Deng, Hui (2016) Pyrolysis oil upgrading in high conversions using sub- and supercritical water above 400°C. Journal of Analytical and Applied Pyrolysis, 119 . pp. 180-188. ISSN 0165-2370

Isaia, Cristina, McNally, Donal S., McMaster, Simon A. and Branson, David T. (2018) Effect of mechanical preconditioning on the electrical properties of knitted conductive textiles during cyclic loading. Textile Research Journal . ISSN 0040-5175

Jackson, Andrew M. and Turnbull, Barbara (2017) Identification of particle-laden flow features from wavelet decomposition. Physica D: Nonlinear Phenomena, 361 . pp. 12-27. ISSN 0167-2789

Jackson, S.J., Power, H. and Giddings, Donald (2017) Immiscible thermo-viscous fingering in Hele-Shaw cells. Computers and Fluids, 156 . pp. 621-641. ISSN 1879-0747

Jackson, S.J., Power, H., Giddings, Donald and Stevens, D. (2017) The stability of immiscible viscous fingering in Hele-Shaw cells with spatially varying permeability. Computer Methods in Applied Mechanics and Engineering, 320 . pp. 606-632. ISSN 1879-2138

Janjua, Zaid A., Turnbull, Barbara, Choy, Kwang-Leong, Pandis, Christos, Liu, Junpeng, Hou, Xianghui and Choi, Kwing-So (2017) Performance and durability tests of smart icephobic coatings to reduce ice adhesion. Applied Surface Science, 407 . pp. 555-564. ISSN 0169-4332

Janjua, Zaid A., Turnbull, Barbara, Hibberd, Stephen and Choi, Kwing-So (2018) Mixed ice accretion on aircraft wings. Physics of Fluids, 30 (2). 027101. ISSN 1070-6631

Jarimi, Hasila, Devrim, Aydin, Zhang, Yanan, Ding, Yate, Ramadan, Omar, Chen, Xiangjie, Dodo, Auwal, Utlu, Zafer and Riffat, Saffa (2018) Materials characterization of innovative composite materials for solar-driven thermochemical heat storage (THS) suitable for building application. International Journal of Low-Carbon Technologies, 13 (1). pp. 30-42. ISSN 1748-1325

Jasim M, Ali, Marsh, Stuart and Smith, Martin J. (2016) Modelling the spatiotemporal change of canopy urban heat islands. Building and Environment, 107 . pp. 64-78. ISSN 1873-684X

Jayet, Baptiste, Morgan, Stephen P. and Dehgani, Hamid (2018) Incorporation of an ultrasound and model guided permissible region improves quantitative source recovery in bioluminescence tomography. Biomedical Optics Express, 9 (3). pp. 1360-1374. ISSN 2156-7085

Jefferson-Loveday, Richard J. (2018) Hybrid RANS-LES for turbomachinery. In: ASME 2018 Turbo Expo, 11-15 Jun 2018, Oslo, Norway.

Jefferson-Loveday, Richard J. (2017) Differential equation-based specification of turbulence integral length scales for cavity flows. Journal of Engineering for Gas Turbines and Power, 139 (6). 062508. ISSN 0742-4795

Jefferson-Loveday, Richard J. (2016) Differential equation-based specification of turbulence integral length scales for cavity flows. In: ASME 2016 Turbo Expo, 13-17 Jun 2016, Seoul, South Korea.

Jeyalingam, Jonne and Jabbal, Mark (2018) Experimental investigation of the aeroacoustics of synthetic jet actuators in quiescent conditions. Sensors and Actuators A: Physical, 280 . pp. 52-60. ISSN 0924-4247

Jia, Ke, Ren, Zhefeng, Li, Lun, Xuan, Zhenwen and Thomas, David (2017) High frequency impedance based fault location in distribution system with DGs. IET Generation, Transmission and Distribution . ISSN 1751-8695

Jia, Min and Heath, Timothy (2016) China’s diversifying demand for housing for the elderly. International Journal of Housing Markets and Analysis, 9 (2). pp. 256-271. ISSN 1753-8270

Jin, X., Shipway, P.H. and Sun, W. (2015) The role of frictional power dissipation (as a function of frequency) and test temperature on contact temperature and the subsequent wear behaviour in a stainless steel contact in fretting. Wear, 330 . pp. 103-111. ISSN 1873-2577

Jin, X., Sun, W. and Shipway, P.H. (2016) Derivation of a wear scar geometry-independent coefficient of friction from fretting loops exhibiting non-Coulomb frictional behaviour. Tribology International, 102 . pp. 561-568. ISSN 1879-2464

Jing, H., Slatcher, N., Meng, X. and Hunter, G. (2016) Monitoring capabilities of a mobile mapping system based on navigation qualities. In: XXIII ISPRS Congress, 12-19 July 2016, Prague, Czech Republic.

Jing, Hao, Bonenberg, Lukasz Kosma, Pinchin, James, Hill, Chris and Moore, Terry (2016) Detection of UWB ranging measurement quality for collaborative indoor positioning. Journal of Location Based Services, 9 (4). pp. 296-319. ISSN 1748-9725

Jing, Hao, Pinchin, James, Hill, Chris and Moore, Terry (2016) Wi-Fi fingerprinting based on collaborative confidence level training. Pervasive and Mobile Computing, 30 . pp. 32-44. ISSN 1574-1192

Jing, Hao, Pinchin, James, Hill, Chris and Moore, Terry (2016) An adaptive weighting based on modified DOP for collaborative indoor positioning. Journal of Navigation, 69 (02). pp. 225-245. ISSN 0373-4633

Jing, Hao, Pinchin, James, Hill, Chris and Moore, Terry (2014) Collaborative Wi-Fi fingerprint training for indoor positioning. In: 27th International Technical Meeting of The Satellite Division of the Institute of Navigation, 8-12 Sept 2014, Tampa, Florida.

Kakade, Rohan, Walker, John G. and Phillips, Andrew J. (2015) Optimising performance of a confocal fluorescence microscope with a differential pinhole. Measurement Science and Technology, 27 (1). ISSN 1361-6501

Kakimpa, Bruce, Morvan, Herve and Hibberd, Stephen (2016) The depth-averaged numerical simulation of laminar thin-film flows with capillary waves. Journal of Engineering for Gas Turbines and Power, 138 (11). 112501/1-112501/10. ISSN 0742-4795

Kakouris, E.G. and Triantafyllou, S.P. (2018) Material point method for crack propagation in anisotropic media: a phase field approach. Archive of Applied Mechanics, 88 (1-2). pp. 287-316. ISSN 0939-1533

Kakouris, Emmanouil and Triantafyllou, Savvas P. (2017) Phase-field material point method for brittle fracture. International Journal for Numerical Methods in Engineering, 112 (12). pp. 1750-1776. ISSN 1097-0207

Kamdi, Z., Shipway, P.H., Voisey, K.T. and Sturgeon, A.J. (2011) Abrasive wear behaviour of conventional and large-particle tungsten carbide-based cermet coatings as a function of abrasive size and type. Wear, 271 (9-10). pp. 1264-1272. ISSN 0043-1648

Kang, Ji Jun, Becker, Adib A., Wen, Wu and Sun, Wei (2018) Extracting elastic-plastic properties from experimental loading-unloading indentation curves using different optimization techniques. International Journal of Mechanical Sciences, 144 . pp. 102-109. ISSN 0020-7403

Kang, Rongjie, Guo, Yong, Chen, Lisha, Branson, David T. and Dai, Jian S. (2016) Design of a pneumatic muscle based continuum robot with embedded tendons. IEEE/ASME Transactions on Mechatronics (99). ISSN 1083-4435

Kantharaj, Bharath, Garvey, Seamus D. and Pimm, Andrew James (2015) Compressed air energy storage with liquid air capacity extension. Applied Energy, 157 . pp. 152-164. ISSN 0306-2619

Kantharaj, Bharath, Garvey, Seamus D. and Pimm, Andrew James (2015) Thermodynamic analysis of a hybrid energy storage system based on compressed air and liquid air. Sustainable Energy Technologies and Assessments, 11 . pp. 159-164. ISSN 2213-1388

Karim, Shah, Piano, Samanta, Leach, Richard K. and Tolley, Martin (2018) Error modelling and validation of a high-precision five degree of freedom hybrid mechanism for high-power high-repetition rate laser operations. Precision Engineering . ISSN 0141-6359

Karimi, G.N., Shipway, P.H., Stewart, D.A. and Hussain, T. (2018) Corrosion of cast Stellite-3 analogue in simulated PWR conditions. Corrosion Science . ISSN 1879-0496

Kariou, F.A., Triantafyllou, S.P., Bournas, D.A. and Koutas, L.N. (2018) Out-of-plane response of masonry walls strengthened using textile-mortar system. Construction and Building Materials, 165 . pp. 769-781. ISSN 1879-0526

Karjalainen, Erno, Wales, Dominic J., Gunasekera, Deshani H.A.T, Dupont, Jairton, Licence, Peter, Wildman, Ricky D. and Sans, Victor (2018) Tuneable ionic control of polymeric films for inkjet based 3D printing. ACS Sustainable Chemistry & Engineering . ISSN 2168-0485

Karvountzis-Kontakiotis, Apostolos, Vafamehr, Hassan, Cairns, Alasdair and Peckham, Mark (2018) Study on pollutants formation under knocking combustion conditions using an optical single cylinder SI research engine. Energy, 158 . pp. 899-910. ISSN 1873-6785

Katrib, Juliano, Folorunso, Olaosebikan, Dodds, Christopher, Dimitrakis, Georgios and Kingman, Sam W. (2015) Improving the design of industrial microwave processing systems through prediction of the dielectric properties of complex multi-layered materials. Journal of Materials Science, 50 (23). pp. 7591-7599. ISSN 1573-4803

Kattimeri, Athina and Scase, Matthew M. (2014) Turbulent ‘stopping plumes’ and plume pinch-off in uniform surroundings. Environmental Fluid Mechanics, 15 (5). pp. 923-937. ISSN 1567-7419

Kaunga-Nyirenda, S.N., Dias, H.K., Lim, J.J., Bull, S., Malaguti, S., Bellanca, G. and Larkins, E.C. (2014) Design and simulation of high-speed nanophotonic electro-optic modulators. In: Numerical Simulation of Optoelectronic Devices, 2014, 1-4 September 2014, Palma de Mallorca.

Kaunga-Nyirenda, Simeon Newton, Bull, Stephen, Lim, Jun Jun, Hasler, Karl-Heinz, Fricke, Jörg and Larkins, Eric C. (2014) Factors influencing brightness and beam quality of conventional and distributed Bragg reflector tapered laser diodes in absence of self-heating. IET Optoelectronics, 8 (2). pp. 99-107. ISSN 1751-8768

Kealy, Allison, Retscher, Guenther, Toth, Charles, Hasnur-Rabiain, Azmir, Gikas, Vassilis, Grejner-Brzezinska, Dorota, Danezis, Chris and Moore, Terry (2016) Collaborative navigation as a solution for PNT applications in GNSS challenged environments: report on field trials of a joint FIG / IAG working group. Journal of Applied Geodesy, 9 (4). pp. 244-263. ISSN 1862-9016

Kefalidou, Genovefa (2017) When immediate interactive feedback boosts optimization problem solving: a ‘human-in-the-loop’ approach for solving capacitated vehicle routing problems. Computers in Human Behavior, 73 . pp. 110-124. ISSN 0747-5632

Kefalidou, Genovefa, Golightly, David and Sharples, Sarah (2018) Identifying rail asset maintenance processes: a human-centric and sensemaking approach. Cognition, Technology and Work, 20 (1). pp. 73-92. ISSN 1435-5566

Kefalidou, Genovefa and Sharples, Sarah (2016) Encouraging serendipity in research: designing technologies to support connection-making. International Journal of Human-Computer Studies, 89 . pp. 1-23. ISSN 1071-5819

Keikha, P., Hall, M.R. and Dawson, Andrew (2010) Concrete pavements as a source of heating and cooling. In: 11th International Symposium on Concrete Roads, 13-15 October 2010, Seville, Spain.

Kennedy, Andrew R. (2016) Assessing the potential for multi-functional “hybrid” porous Al-phase change material structures. Materials Letters, 185 . pp. 339-341. ISSN 1873-4979

Kent, M.G., Altomonte, Sergio, Tregenza, P.R. and Wilson, R. (2015) Temporal variables and personal factors in glare sensation. Lighting Research and Technology, 48 (6). pp. 689-710. ISSN 1477-0938

Kesseler, Matthew, Heller, Valentin and Turnbull, Barbara (2018) A laboratory-numerical approach for modelling scale effects in dry granular slides. Landslides . ISSN 1612-510X

Key, Sarah, La Rocca, Antonino, Fay, Mike, Rance, Graham and Growney, David (2018) Morphological characterisation of diesel soot in oil and the associated extraction dependence. In: WCX18: SAE World Congress Experience, 10-12 April 2018, Detroit, Michigan, USA.

Khajavi, Siavash H., Baumers, Martin, Holmström, Jan, Özcan, Ender, Atkin, Jason, Jackson, Warren G. and Li, Wenwen (2018) To kit or not to kit: analysing the value of model-based kitting for additive manufacturing. Computers in Industry, 98 . pp. 100-117. ISSN 0166-3615

Khalaj, Omid, Tafreshi, Seyed Naser Moghaddas, Mask, Bohuslav and Dawson, Andrew (2015) Improvement of pavement foundation response with multi-layers of geocell reinforcement: cyclic plate load test. Geomechanics and Engineering, 9 (3). pp. 373-395. ISSN 2005-307X

Khaled, Shaban A., Alexander, Morgan R., Irvine, Derek J., Wildman, Ricky D., Wallace, Martin J., Sharpe, Sonja, Yoo, Jae and Roberts, Clive J. (2018) Extrusion 3D printing of paracetamol tablets from a single formulation with tunable release profiles through control of tablet geometry. AAPS PharmSciTech . ISSN 1530-9932 (In Press)

Kiamba, Lorna, Rodrigues, Lucélia Taranto and Marsh, Julian (2017) Community energy schemes: the role of public participation and engagement. In: Passive and Low Energy Architecture (PLEA) 2017, 3-5 July 2017, Edinburgh, UK.

Kiamba, Lorna, Rodrigues, Lucélia Taranto and Marsh, Julian (2017) Tapping the potential for energy storage in community energy initiatives. In: 16th International Conference on Sustainable Energy Technologies (SET2017), 17-20 July 2017, Bologna, Italy.

Kilsby, P., Remenyte-Prescott, Rasa and Andrews, John D. (2016) Modelling asset management of railway overhead line equipment. In: 9th IMA International Conference on Modelling in Industrial Maintenance and Reliability (MIMAR), 12-14 July 2016, London, UK.

Kilsby, Paul, Remenyte-Prescott, Rasa and Andrews, John (2018) A Petri Net-based life cycle cost analysis approach. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit . ISSN 2041-3017

Kilsby, Paul, Remenyte-Prescott, Rasa and Andrews, John (2017) A modelling approach for railway overhead line equipment asset management. Reliability Engineering & System Safety . ISSN 0951-8320

Kirkwood, Charlie, Cave, Mark, Beamish, David, Grebby, Stephen and Ferreira, Antonio (2016) A machine learning approach to geochemical mapping. Journal of Geochemical Exploration, 167 . pp. 49-61. ISSN 1879-1689

Knott, Andrew N., Makarovsky, Oleg, O’Shea, Paul, Tuck, Christopher and Wu, Yupeng (2018) Scanning photocurrent microscopy of 3D printed light trapping structures in dye-sensitized solar cells. Solar Energy Materials and Solar Cells, 180 . pp. 103-109. ISSN 1879-3398

Kone, Jean-Paul, Zhang, Xinyu, Yan, Yuying and Adegbite, Stephen (2018) An open-source toolbox for PEM fuel cell simulation. Computation, 6 (2). 38/1-38/17. ISSN 2079-3197

Konyukhov, Andrey I., Romanova, Elena A., Benson, Trevor M., Athanasiou, Giorgos S., Lousteau, Joris, Scarpignato, Gerardo, Pugliese, Diego and Milanese, Daniel (2016) Effect of submicron deformations on the transmission of all-solid photonic bandgap fibre. Optical and Quantum Electronics, 48 (544). pp. 1-15. ISSN 1572-817X

Koroma, S.G., Hussein, M.F.M. and Owen, J.S. (2014) Vibration of a beam on continuous elastic foundation with nonhomogeneous stiffness and damping under a harmonically excited mass. Journal of Sound and Vibration, 333 (9). pp. 2571-2587. ISSN 0022-460X

Kostas, Emily T., Beneroso, Daniel and Robinson, John P. (2017) The application of microwave heating in bioenergy: A review on the microwave pre-treatment and upgrading technologies for biomass. Renewable and Sustainable Energy Reviews, 77 . pp. 12-27. ISSN 1364-0321

Kruusimagi, Martin, Sharples, Sarah and Robinson, Darren (2017) Living with an autonomous spatiotemporal home heating system: exploration of the user experiences (UX) through a longitudinal technology intervention-based mixed-methods approach. Applied Ergonomics, 65 . pp. 286-308. ISSN 1872-9126

Kulik, Alexander, Kunert, André, Beck, Stephan, Matthes, Carl-Feofan, Schollmeyer, Andre, Kreskowski, Adrian, Fröhlich, Bernd, Cobb, Sue and D'Cruz, Mirabelle (2018) Virtual Valcamonica: collaborative exploration of prehistoric petroglyphs and their surrounding environment in multi-user virtual reality. Presence: Teleoperators and Virtual Environments, 26 (3). pp. 297-321. ISSN 1531-3263

Kumar, D.S., Creagh, Stephen C., Sujecki, S. and Benson, Trevor M. (2017) Modelling chaos in asymmetric optical fibres. In: 19th International Conference on Transparent Optical Networks (ICTON), 2-6 July 2017, Girona, Spain.

Kuna, Kranthi, Airey, Gordon and Thom, Nick (2016) Development of a tool to assess in-situ curing of Foamed Bitumen Mixtures. Construction and Building Materials, 124 . pp. 55-68. ISSN 0950-0618

Kuna, Kranthi, Airey, Gordon and Thom, Nick (2016) Mix design considerations of foamed bitumen mixtures with reclaimed asphalt pavement material. International Journal of Pavement Engineering . pp. 1-14. ISSN 1029-8436

Kuryzheva, Olga, Nerukh, Alexander and Benson, Trevor M. (2016) Resonances excited by an airy pulse in a dielectric layer. In: 24th International Workshop on Optical Wave & Waveguide Theory and Numerical Modelling (OWTNM 2016), 20-21 May 2016, Warsaw, Poland.

Kyaw, S.T., Jones, I.A. and Hyde, T.H. (2016) Simulation of failure of air plasma sprayed thermal barrier coating due to interfacial and bulk cracks using surface-based cohesive interaction and extended finite element method. Journal of Strain Analysis for Engineering Design, 51 (2). pp. 132-143. ISSN 2041-3130

Kyaw, Si Thu, Rouse, James Paul, Lu, Jiawa and Sun, Wei (2016) Determination of material parameters for a unified viscoplasticity-damage model for a P91 power plant steel. International Journal of Mechanical Sciences, 115-116 . pp. 168-179. ISSN 0020-7403

La Rocca, Antonino, Liberto, G. Di., Shayler, Paul J., Parmenter, C.D.J. and Fay, M.W. (2014) Application of nanoparticle tracking analysis platform for the measurement of soot-in-oil agglomerates from automotive engines. Tribology International, 70 . pp. 142-147. ISSN 0301-679X

Lacinska, Alicja M., Styles, Michael T., Bateman, Keith, Hall, Matthew and Brown, Paul D. (2017) An experimental study of the carbonation of serpentinite and partially serpentinised peridotites. Frontiers in Earth Science, 5 . ISSN 2296-6463

Lamperti, Riccardo, Grenfell, James, Sangiorgi, Cesare, Lantieri, Claudio and Airey, Gordon D. (2015) Influence of waxes on adhesion properties of bituminous binders. Construction and Building Materials, 76 . pp. 404-412. ISSN 0950-0618

Land, Patrick, Branson, David T., Crossley, Richard J. and Ratchev, Svetan (2016) Development of in-situ monitoring systems for the thermoforming of pre-preg composite laminates. In: MS&T16 Materials Science & Technology, 23-27 October 2016, Salt Lake City, USA.

Land, Patrick, Crossley, Richard, Branson, David T. and Ratchev, Svetan (2016) Technology review of thermal forming techniques for use in composite component manufacture. SAE International Journal of Aerospace, 9 (1). pp. 81-89. ISSN 1946-3901

Land, Patrick, De Sousa, Luis, Ratchev, Svetan, Branson, David T., Brookes, Harvey and Wright, Jon (2016) Evaluation of control methods for thermal roll forming of aerospace composite materials. SAE International Journal of Aerospace, 9 (2). pp. 223-230. ISSN 1946-3901

Lang, Alexandra. R., Martin, Jennifer L., Sharples, Sarah and Crowe, John A. (2014) Medical device design for adolescent adherence and developmental goals: a case study of a cystic fibrosis physiotherapy device. Patient Preference and Adherence, 2014 (8). pp. 301-309. ISSN 1177-889X

Langston, Paul, Ai, Jun and Yu, Hai-Sui (2013) Simple shear in 3D DEM polyhedral particles and in a simplified 2D continuum model. Granular Matter, 15 (5). pp. 595-606. ISSN 1434-5021

Large, David R., Burnett, Gary, Antrobus, Vicki and Skrypchuk, Lee (2018) Driven to discussion: engaging drivers in conversation with a digital assistant as a countermeasure to passive task-related fatigue. IET Intelligent Transport Systems, 12 (6). pp. 420-426. ISSN 1751-9578

Large, David R., Burnett, Gary, Benford, Steve and Oliver, Keith (2016) Crowdsourcing good landmarks for in-vehicle navigation systems. Behaviour & Information Technology, 35 (10). pp. 807-816. ISSN 1362-3001

Large, David R., Burnett, Gary and Bolton, Adam (2017) Augmenting landmarks during the head-up provision of in-vehicle navigation advice. International Journal of Mobile Human Computer Interaction . ISSN 1942-3918 (In Press)

Large, David R., Burnett, Gary, Crundall, Elizabeth, van Loon, Editha, Eren, Ayse L. and Skrypchuk, Lee (2017) Developing predictive equations to model the visual demand of in-vehicle touchscreen HMIs. International Journal of Human-Computer Interaction . ISSN 1532-7590 (In Press)

Large, David R., Burnett, Gary and Mohd-Hasni, Yasmin (2017) Capturing cultural differences between UK and Malaysian drivers to inform the design of in-vehicle navigation systems. International Journal of Automotive Engineering, 8 (3). pp. 112-119. ISSN 2185-0984

Large, David R., Clark, Leigh, Quandt, Annie, Burnett, Gary and Skrychuk, Lee (2017) Steering the conversation: a linguistic exploration of natural language interactions with a digital assistant during simulated driving. Applied Ergonomics, 63 . pp. 53-61. ISSN 1872-9126

Large, David R., Golightly, David and Taylor, Emma (2017) Train driving simulator studies: can novice drivers deliver the goods? Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit . ISSN 2041-3017 (In Press)

Larkins, E.C., Bull, S., Kaunga-Nyirenda, S., Helal, M.A., Vilokkinen, V., Uusimaa, P., Crump, P. and Erbert, G. (2014) Design optimisation of high-brightness laser diodes for external cavity operation in the BRIDLE project. In: 2014 International Semiconductor Laser Conference, 7-10 September 2014, Palma de Mallorca, Spain.

Lawson, Glyn, Brown, Michael, Coughlan, Tim, Floyde, Anne, Baurley, Sharon, Elliott, Meretta, Koppe, Therese and Tsai, Allen (2016) Enhancing the design process with drama-related methods. Design Journal, 19 (4). pp. 605-623. ISSN 1460-6925

Lawson, Glyn, Roper, Tessa and Abdullah, Che (2016) Multimodal “sensory illusions” for improving spatial awareness in virtual environments. In: European Conference on Cognitive Ergonomics 2016. (In Press)

Lawson, Glyn, Roper, Tessa, Herriotts, Paul, Malcolm, Louise and Salanitri, Davide (2017) Perceptions of an automotive load space in a virtual environment. International Journal of Vehicle Design, 74 (2). pp. 92-105. ISSN 1741-5314

Laybourn, Andrea, Dawson, Robert, Clowes, Rob, Hasell, Tom, Cooper, Andrew I., Khimyak, Yaroslav Z. and Adams, Dave J. (2014) Network formation mechanisms in conjugated microporous polymers. Polymer Chemistry, 5 (21). pp. 6325-6333. ISSN 1759-9962

Laybourn, Andrea, Katrib, Juliano, Ferrari-John, Rebecca S., Morris, Christopher G., Yang, Sihai, Udoudo, Ofonime, Easun, Timothy L., Dodds, Chris, Champness, Neil R., Kingman, Samuel W. and Schröder, Martin (2017) Metal–organic frameworks in seconds via selective microwave heating. Journal of Materials Chemistry A, 16 (5). pp. 7333-7338. ISSN 2050-7496

Laybourn, Andrea, Katrib, Juliano, Palade, Paula A., Easun, Timothy L., Champness, Neil R., Schröder, Martin and Kingman, Samuel W. (2016) Understanding the electromagnetic interaction of metal organic framework reactants in aqueous solution at microwave frequencies. Physical Chemistry Chemical Physics, 18 (7). pp. 5419-5431. ISSN 1463-9084

Le, Bryant and Andrews, John (2016) Modelling wind turbine degradation and maintenance. Wind Energy, 19 (4). pp. 571-591. ISSN 1099-1824

Le, Bryant and Andrews, John (2016) Modelling railway bridge degradation based on historical maintenance data. Safety and Reliability, 35 (2). pp. 32-55. ISSN 2469-4126

Le, Bryant and Andrews, John (2015) Petri net modelling of bridge asset management using maintenance-related state conditions. Structure and Infrastructure Engineering, 12 (6). pp. 730-751. ISSN 1744-8980

Le, Bryant, Andrews, John and Fecarotti, Claudia (2017) A Petri net model for railway bridge maintenance. Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability, 231 (3). pp. 306-323. ISSN 1748-0078

Le, Thi Ho Vi, Gillott, Mark C. and Rodrigues, Lucélia Taranto (2017) An analysis of thermal comfort in primary schools in Vietnam. In: 16th International Conference on Sustainable Energy Technologies (SET2017), 17-20 July, 2017, Bologna, Italy.

Le, Thi Ho Vi, Gillott, Mark C. and Rodrigues, Lucélia Taranto (2017) Children thermal comfort in primary schools in Ho Chi Minh City in Vietnam. In: Passive Low Energy Architecture Design to Thrive (PLEA 2017), 3-5 July 2017, Edinburgh, Scotland, UK.

Le Brech, Yann, Ghislain, Thierry, Leclerc, Sébastien, Bouroukba, Mohammed, Delmotte, Luc, Brosse, Nicolas, Snape, Colin, Chaimbault, Patrick and Dufour, Anthony (2016) Effect of potassium on the mechanisms of biomass pyrolysis studied using complementary analytical techniques. ChemSusChem, 9 (8). pp. 863-872. ISSN 1864-564X

Leach, Richard, Sims-Waterhouse, Danny, Medeossi, Fabrizio, Savio, Enrico, Carmignato, Simone and Su, Rong (2018) Fusion of photogrammetry and coherence scanning interferometry data for all-optical coordinate measurement. CIRP Annals - Manufacturing Technology . ISSN 0007-8506

Leach, Richard, Thompson, Adam and Senin, Nicola (2017) A metrology horror story: the additive surface. In: ASPEN/ASPE 2017 Spring Topical Meeting on Manufacture and Metrology of Structured and Freeform Surfaces for Functional Applications, 14-17 March 2017, Hong Kong, China.

Leach, Richard K. (2016) Metrology for additive manufacturing. Measurement and Control, 49 (4). pp. 132-135. ISSN 0020-2940

Lee, Chai Siah, Binner, Eleanor, Winkworth-Smith, Charles, John, Rebecca, Gomes, R.L. and Robinson, John (2016) Enhancing natural product extraction and mass transfer using selective microwave heating. Chemical Engineering Science, 149 . pp. 97-103. ISSN 0009-2509

Lee, Chai Siah, Chong, Mei Fong, Robinson, John P. and Binner, Eleanor (2014) A review on development and application of plant-based bioflocculants and grafted bioflocculants. Industrial and Engineering Chemisty Research, 53 (48). pp. 18357-18369. ISSN 0888-5885

Lee, Siah Lee, Chong, Mei Fong, Robinson, John P. and Binner, Eleanor (2015) Optimisation of extraction and sludge dewatering efficiencies of bio-flocculants extracted from Abelmoschus esculentus (okra). Journal of Environmental Management, 157 . pp. 320-325. ISSN 1095-8630

Lei, Shurong, Shi, Yong, Yan, Yuying and Zhang, Xingxing (2019) Numerical study on inertial effects on liquid-vapor flow using lattice Boltzmann method. Energy Procedia, 160 . pp. 428-435. ISSN 1876-6102

Lemke, J.N., Simonelli, M., Garibaldi, M., Ashcroft, I., Hague, R., Vedani, M., Wildman, Ricky D. and Tuck, C. (2017) Calorimetric study and microstructure analysis of the order-disorder phase transformation in silicon steel built by SLM. Journal of Alloys and Compounds, 722 . pp. 293-301. ISSN 1873-4669

Lemm, J.D., Warmuth, A.R., Pearson, S.R. and Shipway, P.H. (2014) The influence of surface hardness on the fretting wear of steel pairs: its role in debris retention in the contact. Tribology International, 81 . pp. 258-266. ISSN 1879-2464

Lester, Edward, Avila, Claudio, Pang, Cheng Heng, Williams, Orla, Perkins, Joseph, Gaddipatti⁠, Sanyasi, Tucker, Gregory A., Barraza, Juan Manuel, Trujillo-Uribe, María Patricia and Wu, Tao (2018) A proposed biomass char classification system. Fuel, 232 . pp. 845-854. ISSN 1873-7153

Li, Bo, Huang, Kuo, Yan, Yuying, Li, Yong, Twaha, Ssennoga and Zhu, Jie (2017) Heat transfer enhancement of a modularised thermoelectric power generator for passenger vehicles. Applied Energy, 205 . pp. 868-879. ISSN 0306-2619

Li, C.L., Murray, J.W., Voisey, K.T., Clare, A.T. and McCartney, D.G. (2014) Effect of prior laser microstructural refinement on the formation of amorphous layer in an Al86Co7.6Ce6.4 alloy. Applied Surface Science, 289 . pp. 230-236. ISSN 0169-4332

Li, C.L., Murray, J.W., Voisey, K.T., Clare, A.T. and McCartney, D.G. (2013) Amorphous layer formation in Al86.0Co7.6Ce6.4 glass-forming alloy by large-area electron beam irradiation. Applied Surface Science, 280 . pp. 431-438. ISSN 0169-4332

Li, Chen, Yang, Tao, Kulsangcharoen, Ponggorn, Lo Calzo, Giovanni, Bozhko, Serhiy, Gerada, Chris and Wheeler, Patrick (2018) A modified neutral-point balancing space vector modulation technique for three-level neutral point clamped converters in high speed drives. IEEE Transactions on Industrial Electronics . ISSN 0278-0046

Li, Cuiyan, Li, Guibiao, Ouyang, Haibo, Huang, Jianfeng and Hou, Xianghui (2018) Microstructure and properties of C/C–ZrC composites prepared by hydrothermal deposition combined with carbothermal reduction. Journal of Alloys and Compounds, 741 . pp. 323-330. ISSN 1873-4669

Li, Hao Nan and Axinte, Dragos A. (2017) On a stochastically grain-discretised model for 2D/3D temperature mapping prediction in grinding. International Journal of Machine Tools and Manufacture, 116 . pp. 60-76. ISSN 0890-6955

Li, Junfu, O'Shea, James N., Hou, Xianghui and Chen, George Z. (2017) Faradaic processes beyond Nernst’s law: density functional theory assisted modelling of partial electron delocalisation and pseudocapacitance in graphene oxides. Chemical Communications, 53 (75). pp. 10414-10417. ISSN 1364-548X

Li, Minhan, Kang, Rongjie, Branson, David T. and Dai, Jian S. (2018) Model-free control for continuum robots based on an adaptive Kalman filter. IEEE/ASME Transactions on Mechatronics, 23 (1). pp. 286-297. ISSN 1083-4435

Li, Qile, Shayler, Paul J., McGhee, Michael James and La Rocca, Antonino (2016) The initiation and development of combustion under cold idling conditions using a glow plug in diesel engines. International Journal of Engine Research . pp. 1-16. ISSN 2041-3149

Li, Shuguang and Sitnikova, Elena (2018) A critical review on the rationality of popular failure criteria for composites. Composites Communications . ISSN 2452-2139 (In Press)

Li, Shuguang and Sitnikova, Elena (2017) An excursion into representative volume elements and unit cells. In: Comprehensive Composite Materials II. Elsevier. (In Press)

Li, Shuguang, Sitnikova, Elena, Liang, Yuning and Kaddour, Abdul-Salam (2017) The Tsai-Wu failure criterion rationalised in the context of UD composites. Composites Part A: Applied Science and Manufacturing . ISSN 1359-835X

Li, Xia (2016) Internal structure quantification for granular constitutive modeling. Journal of Engineering Mechanics . C4016001/1-C4016001/16. ISSN 1943-7889

Li, Yao, Yang, Yunming, Yu, Hai-Sui and Roberts, Gethin Wyn (2016) Monotonic direct simple shear tests on sand under multidirectional loading. International Journal of Geomechanics . ISSN 1943-5622

Li, Yilin, Darkwa, Jo and Kokogiannakis, Georgios (2017) Heat transfer analysis of an integrated double skin façade and phase change material blind system. Building and Environment, 125 . pp. 111-121. ISSN 1873-684X

Li, Yong, Zhou, Wenjie, He, Jiabin, Yan, Yuying, Li, Bo and Zeng, Zhixin (2016) Thermal performance of ultra-thin flattened heat pipes with composite wick structure. Applied Thermal Engineering, 102 . pp. 487-499. ISSN 1873-5606

Li, Yue, Tennent, Paul and Cobb, Sue (2018) Appropriate control methods for mobile virtual exhibitions. In: VR Technologies in Cultural Heritage. Communications in Computer and Information Science, 904 (904). Springer, Cham, Switzerland, pp. 165-183. ISBN 978-3-030-05819-7

Liao, Zhirong, Axinte, Dragos, Mieszala, Maxime, M’Saoubi, Rachid, Abelhafeez, Ali, Michler, Johann and Hardy, Mark (2018) On the influence of gamma prime upon machining of advanced nickel based superalloy. CIRP Annals - Manufacturing Technology . ISSN 0007-8506

Liao, Zhirong, Axinte, Dragos A. and Gao, Dong (2017) A novel cutting tool design to avoid surface damage in bone machining. International Journal of Machine Tools & Manufacture, 116 . pp. 52-59. ISSN 0890-6955

Linden, Franciscus van der, Schlegel, Clemens, Christmann, Markus, Regula, Gergely, Hill, Christopher Ian, Giangrande, Paolo, Maré, Jean-Charles and Egaña, Imanol (2014) Implementation of a Modelica library for simulation of electromechanical actuators for aircraft and helicopters. In: 10th International Modelica Conference, 10-12 March 2014, Lund, Sweden.

Liu, Changqi, Huang, Yaji, Wang, Xinye, Zhang, Shuaiyi, Xia, Wenqing, Sun, Chenggong and Liu, Hao (2017) Dynamic experimental investigation on the volatilization behavior of lead and cadmium in the simulated Municipal Solid Waste (MSW) influenced by sulfur compounds during incineration. Energy & Fuels, 31 (1). pp. 847-853. ISSN 0887-0624

Liu, Donglie, Shao, Yunfeng, Liu, Zhenguo, Riedel, Björn, Sowter, Andrew, Niemeier, Wolfgang and Bian, Zhengfu (2014) Evaluation of InSAR and TomoSAR for monitoring deformations caused by mining in a mountainous area with high resolution satellite-based SAR. Remote Sensing, 6 (2). pp. 1476-1495. ISSN 2072-4292

Liu, Jingjing, Liu, Xin, Sun, Yuan, Sun, Chenggong, Liu, Hao, Stevens, Lee A., Li, Kaixi and Snape, Colin E. (2017) High density and super ultra-microporous-activated carbon macrospheres with high volumetric capacity for CO2 capture. Advanced Sustainable Systems, 2 (2). p. 1700115. ISSN 2366-7486

Liu, Junpeng, Janjua, Zaid A., Roe, Martin, Xu, Fang, Turnbull, Barbara, Choi, Kwing-So and Hou, Xianghui (2016) Super-hydrophobic/icephobic coatings based on silica nanoparticles modified by self-assembled monolayers. Nanomaterials, 6 (12). 232/1-232/10. ISSN 2079-4991

Liu, Junpeng, Wang, Jie, Mazzola, Luca, Memon, Halar, Barman, Tamal, Turnbull, Barbara, Mingione, Giuseppe, Choi, Kwing-So and Hou, Xianghui (2018) Development and evaluation of poly(dimethylsiloxane) based composite coatings for icephobic applications. Surface and Coatings Technology, 349 . pp. 980-985. ISSN 0257-8972

Liu, LiangLiang, Marques, Leonel, Correia, Ricardo, Morgan, Stephen P., Lee, Seung-Woo, Tighe, Patrick J., Fairclough, Lucy C. and Korposh, Sergiy (2018) Highly sensitive label-free antibody detection using a long period fibre grating sensor. Sensors and Actuators B: Chemical, 271 . pp. 24-32. ISSN 0925-4005

Liu, Minghua, Shi, Yong, Yan, Jiashu and Yan, Yuying (2017) Lattice Boltzmann simulation of flow and heat transfer in random porous media constructed by simulated annealing algorithm. Applied Thermal Engineering, 115 . pp. 1348-1356. ISSN 1873-5606

Liu, Mingyu, Cheung, C.F., Cheng, C.H., Su, Rong and Leach, Richard K. (2017) A Gaussian process and image registration based stitching method for high dynamic range measurement of precision surfaces. Precision Engineering, 50 . pp. 99-106. ISSN 0141-6359

Liu, Xiaoling, Hasan, Muhammad Sami, Grant, David M., Harper, Lee Thomas, Parsons, Andrew J., Palmer, Graham, Rudd, Chris D. and Ahmed, Ifty (2014) Mechanical, degradation and cytocompatibility properties of magnesium coated phosphate glass fibre reinforced polycaprolactone composites. Journal of Biomaterials Applications, 29 (5). pp. 675-687. ISSN 1530-8022

Liu, Yaan, Hu, Qin, Zhang, Fan, Tuck, Christopher, Irvine, Derek, Hague, Richard J.M., Yinfeng, He, Simonelli, Marco, Rance, Graham, Smith, Emily and Wildman, Ricky D. (2016) Additive manufacture of three dimensional nanocomposite based objects through multiphoton fabrication. Polymers, 8 (9). p. 325. ISSN 2073-4360

Liu, Yaming, Chen, Sheng, Liu, Shi, Feng, Yongxin, Xu, Kai and Zheng, Chuguang (2016) Methane combustion in various regimes: first and second thermodynamic-law comparison between air-firing and oxyfuel condition. Energy, 115 (1). pp. 26-37. ISSN 1873-6785

Liu, Yan, Li, Xinlin, Jin, Jingfu, Liu, Jiaan, Yan, Yuying, Han, Zhiwu and Ren, Luquan (2017) Anti-icing property of bio-inspired micro-structure superhydrophobic surfaces and heat transfer model. Applied Surface Science, 400 . pp. 498-505. ISSN 0169-4332

Liu, Yawen, Apeagyei, Alex K., Ahmad, Naveed, Grenfell, James and Airey, Gordon (2014) Examination of moisture sensitivity of aggregate–bitumen bonding strength using loose asphalt mixture and physico-chemical surface energy property tests. International Journal of Pavement Engineering, 15 (7). pp. 657-670. ISSN 1029-8436

Liu, Ying, Dong, Haibo, Lohse, Niels, Petrovic, Sanja and Gindy, Nabil (2014) An investigation into minimising total energy consumption and total weighted tardiness in job shops. Journal of Cleaner Production, 65 . pp. 87-96. ISSN 0959-6526

Lo Presti, D., Izquierdo, M.A. and Jiménez del Barco Carrión, A. (2018) Towards storage-stable high-content recycled tyre rubber modified bitumen. Construction and Building Materials, 172 . pp. 106-111. ISSN 0950-0618

Lo Presti, Davide (2013) Recycled tyre rubber modified bitumens for road asphalt mixtures: a literature review. Construction and Building Materials, 49 . pp. 863-881. ISSN 0950-0618

Lo Presti, Davide, Fecarotti, Claudia, Clare, Adam T. and Airey, Gordon (2014) Toward more realistic viscosity measurements of tyre rubber–bitumen blends. Construction and Building Materials . ISSN 0950-0618 (In Press)

Lo Presti, Davide, Giancontieri, G. and Hargreaves, David (2017) Improving the rheometry of rubberized bitumen: experimental and computation fluid dynamics studies. Construction and Building Materials, 136 . pp. 286-297. ISSN 1879-0526

Lo Presti, Davide, Jiménez del Barco Carrión, Ana, Airey, Gordon and Hajj, Elie (2016) Towards 100 % recycling of reclaimed asphalt in road surface courses: binder design methodology and case studies. Journal of Cleaner Production, 131 . pp. 43-51. ISSN 1879-1786

Lo Presti, Davide, Khan, Rawid, Hassan, Norhidayah Abdul, Airey, Gordon and Collop, Andrew (2014) Laboratory mix design of asphalt mixture containing reclaimed material. Advances in Materials Science and Engineering, 2014 (507082). ISSN 1687-8434

Lodro, Mir Muhammad, Greedy, Steeve, Mahoto, Naeem A. and Unar, Mukhtiar A. (2017) Throughput analysis of full-duplex communication cognitive radio network. Wireless Personal Communications, 97 (2). pp. 3081-3095. ISSN 1572-834X

Love, A.I.J., Giddings, D. and Power, H. (2014) Numerical analysis of particle flows within a double expansion. Powder Technology, 266 . pp. 22-37. ISSN 1873-328X

Lunn, G.D., Riley, M.A. and McCartney, D.G. (2017) A study of wire breakup and in-flight particle behaviour during wire flame spraying of aluminium. Journal of Thermal Spray Technology . ISSN 1544-1016

Luo, Ming, Luo, Huan, Axinte, Dragos, Liu, Dongsheng, Mei, Jiawei and Liao, Zhirong (2018) A wireless instrumented milling cutter system with embedded PVDF sensors. Mechanical Systems and Signal Processing, 110 . pp. 556-568. ISSN 0888-3270

Lázaro, J., Solórzano, E., Rodríguez-Pérez, M.A. and Kennedy, Andrew R. (2016) Effect of solidification rate on pore connectivity of aluminium foams and its consequences on mechanical properties. Materials Science and Engineering: A, 672 . pp. 236-246. ISSN 0921-5093

Ma, Qiang, Chen, Zhenqian and Liu, Hao (2017) Multiple-relaxation-time lattice Boltzmann simulation for flow, mass transfer, and adsorption in porous media. Physical Review E, 96 (1). 013313/1-013313/14. ISSN 2470-0045

Maclean, Jessica O., Hodson, Jonathan R. and Voisey, K.T. (2015) Laser drilling of via micro-holes in single-crystal semiconductor substrates using a 1070 nm fibre laser with millisecond pulse widths. Proceedings of SPIE. Industrial Laser Applications Symposium (ILAS 2015), 9657 (965701). ISSN 0277-786X

Macri-Pellizzeri, Laura, De Melo, Nigel, Ahmed, Ifty, Grant, David M., Scammell, Brigitte and Sottile, Virginie (2018) Live quantitative monitoring of mineral deposition in stem cells using tetracycline hydrochloride. Tissue Engineering Part C: Methods, 24 (3). pp. 171-178. ISSN 1937-3384

Madanayake, Buddhike Neminda, Gan, Suyin, Eastwick, Carol and Ng, Hoon Kiat (2016) Leaching as a pretreatment process to complement torrefaction in improving co-firing characteristics of Jatropha curcas seed cake. Waste and Biomass Valorization, 7 (3). pp. 559-569. ISSN 1877-2641

Madanayakea, Buddhike Neminda, Gan, Suyin, Eastwick, Carol and Ng, Hoon Kiat (2016) Thermochemical and structural changes in Jatropha curcas seed cake during torrefaction for its use as coal co-firing feedstock. Energy, 100 . pp. 262-272. ISSN 0360-5442

Magri, L., See, Y.-C., Tammisola, Outi, Ihme, M. and Juniper, M.P. (2016) Multiple-scale thermo-acoustic stability analysis of a coaxial jet combustor. Proceedings of the Combustion Institute . ISSN 1540-7489

Maior, Horia A., Wilson, Max L. and Sharples, Sarah (2018) Workload alerts - using physiological measures of mental workload to provide feedback during tasks. ACM Transactions on Computer-Human Interaction, 25 (2). 9:1-9:30. ISSN 1557-7325

Mao, Xuerui and Hussain, F. (2017) Optimal transient growth on a vortex ring and its transition via cascade of ringlets. Journal of Fluid Mechanics, 832 . pp. 269-286. ISSN 1469-7645

Mao, Xuerui and Sørensen, J.N. (2018) Far-wake meandering induced by atmospheric eddies in flow past a wind turbine. Journal of Fluid Mechanics, 846 . pp. 190-209. ISSN 1469-7645

Mao, Xuerui, Zaki, T.A., Sherwin, S.J. and Blackburn, H.M. (2017) Transition induced by linear and nonlinear perturbation growth in flow past a compressor blade. Journal of Fluid Mechanics, 820 . pp. 604-632. ISSN 1469-7645

Mareta, Sannia, Halim, Dunant and Popov, Atanas A. (2017) Control of vibration using compliant actuators. Journal of Vibration and Acoustics, 139 (5). 051007/1-051007/13. ISSN 1048-9002

Maricar, Mohamed Ismaeel, Khalid, Ata, Dunn, Geoff, Greedy, Steve, Thomas, David W.P., Cumming, D.R.S. and Oxley, C.H. (2018) An electrical equivalent circuit to simulate the output power of an AlGaAs/GaAs planar Gunn diode. Microwave and Optical Technology Letters . ISSN 1098-2760 (In Press)

Marinescu, Adrian, Sharples, Sarah, Campbell Ritchie, Alastair, Sanchez Lopez, Tomas, McDowell, Michael and Morvan, Herve (2017) Physiological parameter response to variation of mental workload. Human Factors . ISSN 1547-8181

Markcoons, D.J.W. and Voisey, K.T. (2018) An investigation into whether the laser drilling capabilities of a 2kW fibre laser can be enhanced using pulse train shaping. Lasers in Engineering, 39 (1-2). pp. 17-33. ISSN 1029-029X

Marques, Haroldo Antonio, Marques, Heloisa Alves Silva, Aquino, Marcio and Vadakke Veettil, Sreeja (2018) Accuracy assessment of Precise Point Positioning with multi-constellation GNSS data under ionospheric scintillation effects. Journal of Space Weather and Space Climate, 8 . A15. ISSN 2115-7251

Marques, L., Hernandez, F.U., James, S.W., Morgan, S.P., Clark, M., Tatam, R.P. and Korposh, S. (2016) Highly sensitive optical fibre long period grating biosensor anchored with silica core gold shell nanoparticles. Biosensors and Bioelectronics, 75 . pp. 222-231. ISSN 0956-5663

Martin, Benjamin A.J., Masih, Dawa, Lau, Benson, Beccarelli, Paolo and Chilton, John (2016) An evaluation of thermal and lighting performance within an ETFE structure. In: Sustainable ecological engineering design. Springer, pp. 47-58. ISBN 9783319326450

Martin, Ffion A., Warrior, N.A., Simacek, Pavel, Advani, Suresh, Hughes, Adrian, Darlington, Roger and Senan, Eissa (2018) Simulation and validation of injection-compression filling stage of liquid moulding with fast curing resins. Applied Composite Materials . ISSN 1573-4897

Martin, Jennifer L., Craven, Michael P. and Norris, Beverley J. (2005) MATCH: a new industry-focused approach to medical device development. In: Healthcare systems ergonomics and patient safety: human factor, a bridge between care and cure : proceedings of the International Conference HEPS 2005, Florence, Italy, 30th March-2nd April 2005. Taylor & Francis, Leiden, London, pp. 294-297. ISBN 0415375568

Maskery, I., Aremu, A.O., Parry, L., Wildman, R.D., Tuck, C.J. and Ashcroft, I.A. (2018) Effective design and simulation of surface-based lattice structures featuring volume fraction and cell type grading. Materials & Design, 155 . pp. 220-232. ISSN 0261-3069 (In Press)

Maskery, Ian, Aboulkhair, N.T., Aremu, Adedeji, Tuck, Christopher, Ashcroft, Ian, Wildman, Ricky D. and Hague, Richard J.M. (2016) A mechanical property evaluation of graded density Al-Si10-Mg lattice structures manufactured by selective laser melting. Materials Science and Engineering: A, 670 . pp. 264-274. ISSN 0921-5093

Maskery, Ian, Aboulkhair, N.T., Corfield, M.R., Tuck, Christopher, Clare, A.T., Leach, Richard K., Wildman, Ricky D., Ashcroft, Ian and Hague, Richard J.M. (2016) Quantification and characterisation of porosity in selectively laser melted Al–Si10–Mg using x-ray computed tomography. Materials Characterization, 111 . pp. 193-204. ISSN 1873-4189

Maskery, Ian, Aboulkhair, Nesma T., Aremu, A.O., Tuck, Christopher and Ashcroft, Ian (2018) Compressive failure modes and energy absorption in additively manufactured double gyroid lattices. Additive Manufacturing, 16 . pp. 24-29. ISSN 2214-8604

Maskery, Ian, Aremu, Adedeji, Simonelli, M., Tuck, Christopher, Wildman, Ricky D., Ashcroft, Ian and Hague, Richard J.M. (2015) Mechanical properties of Ti-6Al-4V selectively laser melted parts with body-centred-cubic lattices of varying cell size. Experimental Mechanics, 55 (7). pp. 1261-1272. ISSN 1741-2765

Maskery, Ian, Hussey, Alexandra, Panesar, Ajit, Aremu, Adedeji, Tuck, Christopher, Ashcroft, Ian and Hague, Richard J.M. (2016) An investigation into reinforced and functionally graded lattice structures. Journal of Cellular Plastics . ISSN 0021-955X

Maskery, Ian, Sturm, L., Aremu, Adedeji, Panesar, Ajit, Williams, C.B., Tuck, Christopher, Wildman, Ricky D., Ashcroft, Ian and Hague, Richard J.M. (2017) Insights into the mechanical properties of several triply periodic minimal surface lattice structures made by polymer additive manufacturing. Polymer . ISSN 0032-3861

Mastrotto, Francesca, Breen, A. F., Sicilia, G., Murdan, S., Johnstone, Alexander D., Marsh, Georgina E., Grainger-Boultby, Christine, Russell, Noah A., Alexander, Cameron and Mantovani, Giuseppe (2016) One-pot RAFT and fast polymersomes assembly: a ‘beeline’ from monomers to drug-loaded nanovectors. Polymer Chemistry . ISSN 1759-9962

Mastrotto, Francesca, Breen, Alastair, Sicilia, Giovanna, Johnstone, Alexander D., Marsh, Georgina E., Grainger-Boultby, Christine, Russell, Noah A., Alexander, Cameron and Mantovani, Giuseppe (2016) One-pot RAFT and fast polymersomes assembly: a ‘beeline’ from monomers to drug-loaded nanovectors. Polymer Chemistry . ISSN 1759-9962

Matos, José C., Cruz, Paulo J.S., Valente, Isabel B., Neves, Luís C. and Moreira, Vicente N. (2016) An innovative framework for probabilistic-based structural assessment with an application to existing reinforced concrete structures. Engineering Structures, 111 . pp. 552-564. ISSN 0141-0296

Matveev, Mikhail Y., Ball, Frank G., Jones, I. Arthur, Long, Andrew C., Schubel, Peter J. and Tretyakov, M.V. (2017) Uncertainty in geometry of fibre preforms manufactured with Automated Dry Fibre Placement (ADFP) and its effects on permeability. Journal of Composite Materials . ISSN 1530-793X

Matveev, Mikhail Y., Long, Andrew C., Brown, Louise P. and Jones, I. Arthur (2016) Effects of layer shift and yarn path variability on mechanical properties of a twill weave composite. Journal of Composite Materials . ISSN 0021-9983

Matveev, Mikhail Y., Schubel, Peter J., Long, Andrew C. and Jones, I.A. (2016) Understanding the buckling behaviour of steered tows in automated dry fibre placement (ADFP). Composites Part A: Applied Science and Manufacturing, 90 . pp. 451-456. ISSN 1359-835X

Mbah, Afamefuna Maduka, Walker, John G. and Phillips, Andrew J. (2016) Performance evaluation of turbulence-accentuated interchannel crosstalk for hybrid fibre and free-space optical wavelength-division-multiplexing systems using digital pulse-position modulation. IET Optoelectronics, 10 (1). pp. 11-20. ISSN 1751-8776

Mbah, Afamefuna Maduka, Walker, John G. and Phillips, Andrew J. (2014) Performance evaluation of digital pulse position modulation for wavelength division multiplexing FSO systems impaired by interchannel crosstalk. IET Optoelectronics, 8 (6). pp. 245-255. ISSN 1751-8776

McCorquodale, Mark W. and Munro, Richard J. (2017) Experimental study of oscillating-grid turbulence interacting with a solid boundary. Journal of Fluid Mechanics, 813 . pp. 768-798. ISSN 1469-7645

McDowell, Glenn R., Yue, Peng and de Bono, John P. (2015) Micro mechanics of critical states for isotropically overconsolidated sand. Powder Technology, 283 . pp. 440-446. ISSN 1873-328X

McKay, John, Pickup, Laura, Atkinson, Sarah, McNab, Duncan and Bowie, Paul (2016) Human factors in general practice: early thoughts on the educational focus for specialty training and beyond. Education for Primary Care, 27 (3). pp. 162-171. ISSN 1473-9879

McKechnie, Jon, Colombo, Steve and MacLean, Heather L. (2014) Forest carbon accounting methods and the consequences of forest bioenergy for national greenhouse gas emissions inventories. Environmental Science & Policy, 44 . pp. 164-173. ISSN 1873-6416

McKechnie, Jon, Pourbafrani, Mohammad, Saville, Bradley A. and MacLean, Heather L. (2015) Environmental and financial implications of ethanol as a bioethylene feedstock versus as a transportation fuel. Environmental Research Letters, 10 (12). p. 124018. ISSN 1748-9326

McKechnie, Jon, Pourbafrani, Mohammad, Saville, Bradley A. and MacLean, Heather L. (2015) Exploring impacts of process technology development and regional factors on life cycle greenhouse gas emissions of corn stover ethanol. Renewable Energy, 76 . pp. 726-734. ISSN 1879-0682

McKechnie, Jon, Saville, Brad and MacLean, Heather L. (2016) Steam-treated wood pellets: environmental and financial implications relative to fossil fuels and conventional pellets for electricity generation. Applied Energy, 180 . pp. 637-649. ISSN 0306-2619

McKee, Campbell, Culshaw, Brian and Leach, Richard K. (2016) Laser ultrasound measurement of diaphragm thickness, Young’s modulus and Poisson’s ratio in a MEMS device. IEEE Journal of Selected Topics in Quantum Electronics . ISSN 1558-4542

Meesit, R. and Andrews, J. (2018) Vulnerability assessment modelling for railway networks. In: 10th IMA International Conference on Modelling in Industrial Maintenance and Reliability (MIMAR 2018), 13-15 June 2018, Manchester, UK.

Melillo, Paolo, De Luca, Nicola, Bracale, Marcello and Pecchia, Leandro (2013) Classification tree for risk assessment in patients suffering from congestive heart failure via long-term heart rate variability. IEEE Journal of Biomedical and Health Informatics, 17 (3). pp. 727-733. ISSN 2168-2194

Melillo, Paolo, Fusco, Roberta, Sansone, Mario, Bracale, Marcello and Pecchia, Leandro (2011) Discrimination power of long-term heart rate variability measures for Chronic Heart Failure detection. Medical and Biological Engineering and Computing, 49 (1). pp. 67-74. ISSN 0140-0118

Meng, F., McKechnie, Jon, Turner, T.A. and Pickering, S.J. (2017) Energy and environmental assessment and reuse of fluidised bed recycled carbon fibres. Composites Part A: Applied Science and Manufacturing, 100 . pp. 206-204. ISSN 1359-835X

Meng, Xiaolin, Nguyen, Dinh, Xie, Yilin, Owen, John, Psimoulis, Panagiotis, Ince, Sean, Chen, Qusen, Ye, Jun and Bhatia, Paul (2018) Design and implementation of a new system for large bridge monitoring—GeoSHM. Sensors, 18 (3). p. 775. ISSN 1424-8220

Mezani, S., Hamiti, Tahar, Belguerras, L., Lubin, T., Rashed, Mohamed and Gerada, C. (2015) Magnetically geared induction machines. IEEE Transactions on Magnetics, 51 (11). p. 8111404. ISSN 0018-9464

Mezil, Sylvain, Fujita, Kentaro, Osuka, Paul H., Tomoda, Mononobu, Clark, Matt, Wright, Oliver B. and Matsuda, Osamu (2017) Active chiral control of GHz acoustic whispering-gallery modes. Applied Physics Letters . ISSN 1077-3118

Mhatre, S., Vivacqua, V., Ghadiri, M., Abdullah, A.M., Al-Marri, M.J., Hassanpour, A., Hewakandamby, Buddhika N., Azzopardi, Barry J. and Kermani, B. (2015) Electrostatic phase separation: a review. Chemical Engineering Research and Design, 96 . pp. 177-195. ISSN 0263-8762

Miles, Christopher, van der Zee, Kristoffer George, Hubbard, Matthew E. and Mackenzie, Roderick (2018) Thermo-mechanically-consistent phase-field modeling of thin film flows. Lecture Notes in Computational Science and Engineering . ISSN 1439-7358 (In Press)

Miller, James D. and Grebby, Stephen (2014) Mapping long-term temporal change in imperviousness using topographic maps. International Journal of Applied Earth Observation and Geoinformation, 30 . pp. 9-20. ISSN 0303-2434

Miller, James D., Kim, Hyeonjun, Kjeldsen, Thomas R., Packman, John, Grebby, Stephen and Dearden, Rachel (2014) Assessing the impact of urbanization on storm runoff in a peri-urban catchment using historical change in impervious cover. Journal of Hydrology, 515 . pp. 59-70. ISSN 1879-2707

Miller, Katrina, Brown, Louise P. and McNally, Donal (2018) Fabric sensors – modelling deformation in knitted fabrics. In: 8th World Conference on 3D Fabrics and Their Applications, 28-29 Mar 2018, Manchester, UK.

Mistry, Priyen C., Grant, David M., Stuart, Alastair D., Manickam, Kandavel and Walker, Gavin S. (2017) Evolution of catalyst coated atomised magnesium spheres: an alternative thermal storage medium for concentrated solar power applications. International Journal of Hydrogen Energy, 42 (47). pp. 28453-28463. ISSN 0360-3199

Misurati, Khaled Ahmed, Quan, Yongkai, Gong, Wei, Xu, Guoqiang and Yan, Yuying (2017) Contrastive study of flow and heat transfer characteristics in a helically coiled tube under uniform heating and one-side heating. Applied Thermal Engineering, 114 . pp. 77-84. ISSN 1873-5606

Mitchell, Antony J., Simmons, Kathy and Hann, David B. (2015) Experimental investigation into droplet impingement upon moving films using high speed video and thermal imaging. In: ASME 2015 International Mechanical Engineering Congress & Exposition (IMECE 2015), 13-19 Nov 2015, Houston, Texas, USA.

Mitchell-Smith, Jonathon, Speidel, Alistair and Clare, A.T. (2018) Advancing electrochemical jet methods through manipulation of the angle of address. Journal of Materials Processing Technology, 255 . pp. 364-372. ISSN 0924-0136

Mitchell-Smith, Jonathon, Speidel, Alistair and Clare, A.T. (2018) Transitory electrochemical masking for precision jet processing techniques. Journal of Manufacturing Processes, 31 . pp. 273-285. ISSN 1878-6642

Moghaddas Tafreshi, S.N., Joz Darabi, N. and Dawson, Andrew (2018) Cyclic loading response of footing on multi-layered rubber-soil mixtures. Geomechanics and Engineering, 14 (2). pp. 115-129. ISSN 2005-307X

Moghaddas Tafreshi, S.N., Shaghaghi, T., Tavakoli Mehrjardi, Gh., Dawson, Andrew and Ghadrdan, M. (2015) A simplified method for predicting the settlement of circular footings on multi-layered geocell-reinforced non-cohesive soils. Geotextiles and Geomembranes, 43 (4). pp. 332-344. ISSN 02661144

Moghaddas Tafreshi, S.N., Sharifi, P. and Dawson, Andrew (2016) Performance of circular footings on sand by use of multiple-geocell or -planar geotextile reinforcing layers. Soils and Foundations, 56 (6). ISSN 0038-0806 (In Press)

Mohalik, N.K., Lester, Edward and Lowndes, Ian (2016) Review of experimental methods to determine spontaneous combustion susceptibility of coal – Indian context. International Journal of Mining, Reclamation and Environment, 31 (5). pp. 301-332. ISSN 1748-0949

Mohalik, N.K., Lester, Edward, Lowndes, Ian and Singh, V.K. (2016) Estimation of greenhouse gas emissions from spontaneous combustion/fire of coal in opencast mines – Indian context. Carbon Management, 7 (5-6). pp. 317-332. ISSN 1758-3012

Mohammed, Hayder I., Giddings, Donald, Walker, Gavin S. and Power, Henry (2018) CFD assessment of the effect of nanoparticles on the heat transfer properties of acetone/ZnBr2 solution. Applied Thermal Engineering, 128 . pp. 264-273. ISSN 1873-5606

Mohammed, Jareer, Moore, Terry, Hill, Chris, Bingley, R.M. and Hansen, D.N. (2016) An assessment of static Precise Point Positioning using GPS only, GLONASS only, and GPS plus GLONASS. Measurement, 88 . pp. 121-130. ISSN 0263-2241

Mohammed, Shara K., Hasan, Abbas, Dimitrakis, Georgios and Azzopardi, Barry J. (2018) Churn flow in high viscosity oils and large diameter columns. International Journal of Multiphase Flow, 100 . pp. 16-29. ISSN 0301-9322

Mohd Tobi, A.L., Sun, Wei and Shipway, P.H. (2017) Evolution of plasticity-based wear damage in gross sliding fretting of a Ti-6Al-4V non-conforming contact. Tribology International, 113 . pp. 474-486. ISSN 1879-2464

Moles, Matthew D., Scotchford, Colin A. and Campbell Ritchie, Alastair (2014) Oxidation state of a polyurethane membrane after plasma etching. Conference Papers in Science, 2014 . 347979/1-347979/11. ISSN 2356-6108

Monemian, Emad, Cairns, Alasdair, Gilmore, Mark, Newman, David and Scott, Keith (2017) Evaluation of intake charge hydrogen enrichment in a heavy-duty diesel engine. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering . ISSN 2041-2991

Monemian, Emad, Cairns, Alasdair and Pedrozo, V. (2017) Hydrogen and oxygen fuel enrichment effects on a HD diesel engine. Journal of Engine Research, 47 (47). pp. 13-20.

Money, Arthur G., Barnett, Julie, Kuljis, Jasna, Craven, Michael P., Martin, Jennifer L. and Young, Terry (2011) The role of the user within the medical device design and development process: medical device manufacturers' perspectives. BMC Medical Informatics and Decision Making, 11 (15). ISSN 1472-6947

Monrós-Andreu, G., Martinez-Cuenca, R., Torró, S., Escrig, J., Hewakandamby, B. and Chiva, S. (2016) Multi-needle capacitance probe for non-conductive two-phase flows. Measurement Science and Technology, 27 (7). 074004/1-074004/12. ISSN 1361-6501

Monti, Tamara, Udoudo, O.B., Sperin, Kevin A., Dodds, Chris, Kingman, S.W. and Jackson, Timothy J. (2017) Statistical description of inhomogeneous samples by scanning microwave microscopy. IEEE Transactions on Microwave Theory and Techniques, 65 (6). pp. 2162-2170. ISSN 0018-9480

Moore, Terry (2017) Navigating without a navigator: a review of positioning and navigation technologies for UAVs. In: International Navigation Conference of the Royal Institute of Navigation (INC 17), 27-30 Nov 2017, Brighton, UK.

Moore, Terry (2017) Navigating without a navigator: a review of positioning and navigation technologies for UAVs. In: 30th International Technical Meeting of The Satellite Division of the Institute of Navigation (ION GNSS+ 2017), 25-29 September 2017, Portland, Oregon, USA.

Moore, Terry (2014) Ubiquitous positioning: a pipe dream or reality? In: ION International Technical Meeting 2014, 27-29 January 2014, San Diego, California, USA.

Moroni, Giovanni, Syam, Wahyudin P. and Petrò, Stefano (2018) A simulation method to estimate task-specific uncertainty in 3D microscopy. Measurement . ISSN 0263-2241

Moroni, Giovanni, Syam, Wahyudin P. and Petrò, Stefano (2016) Performance verification of a 4-axis focus variation coordinate measuring system. IEEE Transactions on Instrumentation and Measurement . pp. 1-9. ISSN 0018-9456

Moroni, Giovanni, Syam, Wahyudin P. and Petrò, Stefano (2016) Comparison of chaos optimization functions for performance improvement of fitting of non-linear geometries. Measurement, 86 . pp. 79-92. ISSN 0263-2241

Morris, David E., Oakley, Jeremy E. and Crowe, John A. (2014) A web-based tool for eliciting probability distributions from experts. Environmental Modelling and Software, 52 . pp. 1-4. ISSN 1873-6726

Morris, S.J., Dudman, J.P.R., Körner, L., Melo, P., Newton, L.H. and Clare, Adam T. (2016) Complex functional surface design for additive manufacturing. In: 2016 Annual International Solid Freeform Fabrication Symposium : An Additive Manufacturing Conference, 8-10 August 2016, Austin, Texas, USA.

Moschetti, Giuseppe, Forbes, Alistair, Leach, Richard K., Jiang, Xiang and O’Connor, Daniel (2016) Quadrature wavelength scanning interferometry. Applied Optics, 55 (20). pp. 5332-5340. ISSN 2155-3165

Moschetti, Guiseppe, Forbes, Alistair, Leach, Richard K., Jiang, Xiang and O'Connor, Daniel (2016) Phase and fringe order determination in wavelength scanning interferometry. Optics Express, 24 (8). pp. 8997-9012. ISSN 1094-4087

Mossayebi, M., Wright, Amanda J., Parini, A. and Somekh, Michael G. (2016) Investigating the use of a hybrid plasmonic–photonic nanoresonator for optical trapping using finite-difference time-domain method. Optical and Quantum Electronics, 48 (275). pp. 1-11. ISSN 1572-817X

Mouawad, Bassem, Abebe, Robert, Skuriat, Robert, Li, Jianfeng, De Lillo, Liliana, Empringham, Lee, Johnson, C. Mark, Roberts, Andy, Clarke, Robert and Haynes, Geoff (2018) Cost effective direct-substrate jet impingement cooling concept for power application. In: PCIM 2018 - International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, 5-7 June 2018, Nuremberg, Germany.

Munalli, Daniela, Chronopoulos, Dimitrios and Greedy, Steve (2018) Electromagnetic shielding effectiveness of fiber-reinforced composites: a preliminary study. In: 9th European Workshop on Structural Health Monitoring, 10-13 July 2018, Manchester, UK.

Munro, Richard J. (2012) The interaction of a vortex ring with a sloped sediment layer: critical criteria for incipient grain motion. Physics of Fluids, 24 (2). 026604. ISSN 1089-7666

Munro, Richard J., Bethke, N. and Dalziel, S. B. (2009) Sediment resuspension and erosion by vortex rings. Physics of Fluids, 21 (4). ISSN 1070-6631

Munro, Richard J. and Dalziel, Stuart B. (2005) Attenuation technique for measuring sediment displacement levels. Experiments in Fluids, 39 (3). pp. 602-613. ISSN 0723-4864

Munro, Richard J., Dalziel, Stuart B. and Jehan, H. (2004) A pattern matching technique for measuring sediment displacement levels. Experiments in Fluids, 37 (3). pp. 399-408. ISSN 0723-4864

Munro, Richard J. and Davies, P.A. (2006) The flow generated in a continuously stratified rotating fluid by the differential rotation of a plane horizontal disc. Fluid Dynamics Research, 38 (8). pp. 522-538. ISSN 1873-7005

Munro, Richard J. and Foster, M. R. (2014) Stratified spin-up in a sliced, square cylinder. Physics of Fluids, 26 (2). 026603. ISSN 1070-6631

Munro, Richard J., Foster, M. R. and Davies, P. A. (2010) Instabilities in the spin-up of a rotating, stratified fluid. Physics of Fluids, 22 (5). ISSN 1070-6631

Munro, Richard J., Hewitt, R.E and Foster, M.R. (2015) On the formation of axial corner vortices during spin-up in a cylinder of square cross-section. Journal of Fluid Mechanics, 772 . pp. 246-271. ISSN 1469-7645

Murray, J.W., Ang, A.S.M., Pala, Z., Shaw, E.C. and Hussain, T. (2016) Suspension High Velocity Oxy-Fuel (SHVOF)-sprayed alumina coatings: microstructure, nanoindentation and wear. Journal of Thermal Spray Technology . ISSN 1544-1016

Murray, J.W., Fay, M.W., Kunieda, M. and Clare, A.T. (2013) TEM study on the electrical discharge machined surface of single-crystal silicon. Journal of Materials Processing Technology, 213 (5). pp. 801-809. ISSN 0924-0136

Murray, J.W., Kinnell, P.K., Cannon, A.H, Bailey, B. and Clare, A.T. (2013) Surface finishing of intricate metal mould structures by large-area electron beam irradiation. Precision Engineering, 37 (2). pp. 443-450. ISSN 0141-6359

Murray, James W., Rance, Graham A., Xu, Fang and Hussain, Tanvir (2017) Alumina-graphene nanocomposite coatings fabricated by suspension high velocity oxy-fuel thermal spraying for ultra-low-wear. Journal of the European Ceramic Society . ISSN 1873-619X

Muñoz-Senovilla, Laura, Muñoz, Francisco, Tricot, Gregory, Ahmed, Ifty and Parsons, Andrew J. (2017) Structure–properties relationships in fibre drawing of bioactive phosphate glasses. Journal of Materials Science, 52 (15). pp. 9166-9178. ISSN 1573-4803

Naybour, M., Remenyte-Prescott, R. and Boyd, M. (2018) Evaluation of a community pharmacy dispensing process using a Coloured Petri Net. In: 28th International European Safety and Reliability Conference (ESREL 2018), 17-21 June 2018, Trondheim, Norway. (In Press)

Neges, Matthias and Koch, Christian (2016) Augmented reality supported work instructions for onsite facility maintenance. In: 23rd International Workshop of the European Group for Intelligent Computing in Engineering, 29 June - July 1st 2016, Kraków, Poland.

Nerukh, Alexander, Kuryzheva, Olga and Benson, Trevor M. (2017) Time-spatial structure of airy pulse in non-stationary environment. In: 25th International Workshop on Optical Wave & Waveguide Theory and Numerical Modelling, 5-6 April 2017, Eindhoven, The Netherlands.

Neuhausen, Marcel, Koch, Christian and König, Markus (2016) Image-based window detection: an overview. In: 23rd International Workshop of the European Group for Intelligent Computing in Engineering, 29 June - 1st July 2016, Krakow, Poland.

Newton, Lewis, Senin, Nicola and Leach, Richard (2018) Focus variation measurement of metal additively manufactured surfaces. In: 2018 ASPE and euspen Summer Topical Meeting Advancing Precision in Additive Manufacturing, 22-25 Jul 2018, Berkeley, California, USA. (Unpublished)

Newton, Lewis, Senin, Nicola, Smith, Bethan and Leach, Richard (2018) Feature-based characterisation of evolving surface topographies in finishing operations for additive manufacturing. In: 18th International Conference and Exhibition (euspan), 4-8 Jun 2018, Venice, Italy. (Unpublished)

Nguyen, Dinh Tung, Hargreaves, David and Owen, John (2016) Computational studies on pressure distribution around a bending 5:1 rectangular cylinder. In: 8th International Colloquium on Bluff Body Aerodynamics and Applications, 7-11 June 2016, Boston, Massachusetts, USA.

Nguyen, Dinh Tung, Hargreaves, David and Owen, John (2015) Computational studies of pressure distribution around a 5:1 rectangular section in turbulent flow. In: 14th International Conference on Wind Engineering, 21-26 June, 2015, Porto Alegre, Brazil.

Nguyen, Dinh Tung, Owen, John and Hargreaves, David (2016) Wind tunnel studies of pressure distribution around a 5:1 rectangular cylinder. In: 8th International Colloquium on Bluff Body Aerodynamics and Applications, 7-11 June 2016, Boston, Massachusetts, USA.

Niaz, Akbar, Boatwright, Adrian, Voisey, K.T. and Walsh, Darren A. (2011) Scanning electrochemical microscopy at thermal sprayed anti-corrosion coatings: effect of thermal spraying on heterogeneous electron transfer kinetics. Journal of Electroanalytical Chemistry, 657 (1-2). pp. 46-53. ISSN 1572-6657

Niedderer, Kristina, Tournier, Isabelle, Coleston-Shields, Donna Maria, Craven, Michael P., Gosling, Julia A., Garde, J, Salter, Ben, Bosse, Mochaelle and Griffoen, Ingeborg (2017) Designing with and for people with dementia: developing a mindful interdisciplinary co-design methodology. In: Seventh International Conference of the International Association of Societies of Design Research (IASDR), 1-3 November 2017, Cincinnati, USA.

Nieto, F., Hargreaves, David, Owen, John S. and Hernández, S. (2015) On the applicability of 2D URANS and SST k-ω turbulence model to the fluid-structure interaction of rectangular cylinders. Engineering Applications of Computational Fluid Mechanics, 9 (1). pp. 157-173. ISSN 1994-2060

Nieto, F., Owen, J.S., Hargreaves, David and Hernández, S. (2015) Bridge deck flutter derivatives: efficient numerical evaluation exploiting their interdependence. Journal of Wind Engineering and Industrial Aerodynamics, 136 . pp. 138-150. ISSN 0167-6105

Ninic, Jelena, Freitag, Steffen and Meschke, Günther (2017) A hybrid finite element and surrogate modelling approach for simulation and monitoring supported TBM steering. Tunnelling and Underground Space Technology, 63 . pp. 12-28. ISSN 0886-7798

Ninic, Jelena and Meschke, Günther (2017) Simulation based evaluation of time-variant loadings acting on tunnel linings during mechanized tunnel construction. Engineering Structures, 135 . pp. 21-40. ISSN 0141-0296

Novellino, Alessandro, Cigna, Francesca, Brahmi, Mouna, Sowter, Andrew, Bateson, Luke and Marsh, Stuart (2017) Assessing the feasibility of a national InSAR ground deformation map of Great Britain with Sentinel-1. Geosciences, 7 (2). 19/1-19/14. ISSN 2076-3263

Nuzzo, Stefano, Degano, Michele, Galea, Michael, Gerada, C., Gerada, David and Brown, N.L. (2016) Improved damper cage design for salient-pole synchronous generators. IEEE Transactions on Industrial Electronics . ISSN 1557-9948

Nuzzo, Stefano, Galea, Michael, Gerada, C. and Brown, N.L. (2016) An analytical and genetic-algorithm-based design tool for brushless excitation systems of low-medium rated synchronous generators. In: 19th International Conference on Electrical Machines and Systems, 13-16 Nov 2016, Chiba, Japan.

Nuzzo, Stefano, Galea, Michael, Gerada, C. and Brown, N.L. (2016) Prediction of the voltage drop due to the diode commutation process in the excitation system of salient-pole synchronous generators. In: 19th International Conference on Electrical Machines and Systems, 13-16 Nov 2016, Chiba, Japan.

Nuzzo, Stefano, Galea, Michael, Gerada, C., Gerada, David, Mebarki, Abdelslam and Brown, N.L. (2016) Damper cage loss reduction and no-load voltage THD improvements in salient-pole synchronous generators. In: 8th IET International Conference on Power Electronics, Machines and Drives (PEMD 2016), 19-21 April 2016, Glasgow, UK.

O'Halloran, S.M., Shipway, P.H., Connaire, A.D., Leen, Sean B. and Harte, A.M. (2017) A combined wear-fatigue design methodology for fretting in the pressure armour layer of flexible marine risers. Tribology International, 108 . pp. 7-15. ISSN 1879-2464

Odbert, Henry M. and Grebby, Stephen (2014) A note on geographical systems and maps of Montserrat. Memoirs, 39 . pp. 489-494. ISSN 2041-4722

Oeder, Thorsten, Castellazzi, Alberto and Pfost, Martin (2017) Electrical and thermal failure modes of 600 V p-gate GaN HEMTs. Microelectronics Reliability, 76-77 . pp. 321-326. ISSN 0026-2714

Ogunniran, Oluwatosin, Binner, Eleanor, Sklavounos, Angelique and Robinson, John P. (2017) Enhancing evaporative mass transfer and steam stripping using microwave heating. Chemical Engineering Science, 165 . pp. 147-153. ISSN 1873-4405

Okafor, Obinna, Weilhard, Andreas, Fernandes, Jesum A., Karjalainen, Erno, Goodridge, Ruth and Sans, Victor (2017) Advanced reactor engineering with 3D printing for the continuous-flow synthesis of silver nanoparticles. Reaction Chemistry and Engineering . ISSN 2058-9883

Oshone, Mirkat, Pires, Gustavo Menegusso, Jiménez del Barco Carrión, Ana, Rahbar-Rastegar, Reyhaneh, Airey, Gordon, Daniel, Jo Sias, Bailey, Helen and Smith, David (2018) Simulating plant produced material in the laboratory to replicate rheological and fatigue properties. Road Materials and Pavement Design . ISSN 1468-0629

Otaru, A.J. and Kennedy, Andrew R. (2016) The permeability of virtual macroporous structures generated by sphere packing models: comparison with analytical models. Scripta Materialia, 124 . pp. 30-33. ISSN 1359-6462

Otaru, A.J., Morvan, H.P. and Kennedy, A.R. (2018) Modelling and optimisation of sound absorption in replicated microcellular metals. Scripta Materialia, 150 . pp. 152-155. ISSN 1359-6462

Otaru, A.J., Morvan, Herve and Kennedy, Andrew R. (2018) Measurement and simulation of pressure drop across replicated porous aluminium in the Darcy-Forchheimer regime. Acta Materialia, 149 . pp. 265-273. ISSN 1359-6454

O’Halloran, S.M., Harte, A.M., Shipway, P.H. and Leen, S.B. (2018) An experimental study on the key fretting variables for flexible marine risers. Tribology International, 117 . pp. 141-151. ISSN 1879-2464

Pala, Z., Shaw, E., Murray, J.W., Senin, Nicola and Hussain, Tanvir (2017) Suspension high velocity oxy-fuel spraying of TiO2: a quantitative approach to phase composition. Journal of the European Ceramic Society, 37 (2). pp. 801-810. ISSN 1873-619X

Pala, Zdenek, Bai, Mingwen, Lukac, Frantisek and Hussain, Tanvir (2017) Laser clad and HVOF sprayed Stellite 6 coating in chlorine rich environment with KCI at 700 °C. Oxidation of Metals . ISSN 1573-4889

Paleo Cageao, Paloma, Simmons, Kathy, Prabhakar, Arun and Chandra, Budi (2017) Assessment of the oil scoop capture efficiency in high speed rotors. Journal of Engineering for Gas Turbines and Power . ISSN 1528-8919 (In Press)

Pampel, Sanna M., Jamson, Samantha L., Hibberd, Daryl and Barnard, Yvonne (2018) Old habits die hard? The fragility of eco-driving mental models and why green driving behaviour is difficult to sustain. Transportation Research Part F: Traffic Psychology and Behaviour, 57 . pp. 139-150. ISSN 1369-8478

Pampel, Sanna M., Jamson, Samantha L., Hibberd, Daryl and Barnard, Yvonne (2017) The activation of eco-driving mental models: can text messages prime drivers to use their existing knowledge and skills? Cognition, Technology & Work, 19 (4). pp. 743-758. ISSN 1435-5566

Pampel, Sanna M., Large, David R., Burnett, Gary, Matthias, Rebecca, Thompson, Simon and Skrypchuk, Lee (2018) Getting the driver back into the loop: the quality of manual vehicle control following long and short non-critical transfer-of-control requests: TI:NS. Theoretical Issues in Ergonomics Science . ISSN 1463-922X (In Press)

Panagos, P., Wang, Y., McCartney, D.G., Li, M., Ghaffari, B., Zindel, J.W., Miao, J., Makineni, S., Allison, J.E., Shebanova, O., Robson, J.D. and Lee, Peter D. (2017) Characterising precipitate evolution in multi-component cast aluminium alloys using small-angle X-ray scattering. Journal of Alloys and Compounds . ISSN 1873-4669

Panek, R., Wdowin, M., Franus, W., Czarna, D., Stevens, L.A., Deng, H., Liu, J., Sun, C., Liu, Hao and Snape, Colin E. (2017) Fly ash-derived MCM-41 as a low-cost silica support for polyethyleneimine in post-combustion CO2 capture. Journal of CO2 Utilization, 22 . pp. 81-90. ISSN 2212-9820

Panesar, Ajit, Ashcroft, Ian, Brackett, David, Wildman, Ricky D. and Hague, Richard (2017) Design framework for multifunctional additive manufacturing: coupled optimization strategy for structures with embedded functional systems. Additive Manufacturing, 16 . pp. 98-106. ISSN 2214-8604

Panesar, Ajit, Brackett, D., Ashcroft, Ian, Wildman, Ricky D. and Hague, Richard J.M. (2015) Design framework for multifunctional additive manufacturing: placement and routing of three-dimensional printed circuit volumes. Journal of Mechanical Design, 137 (11). 111414/1-111414/10. ISSN 1528-9001

Panesar, Ajit, Brackett, David, Ashcroft, Ian, Wildman, Ricky D. and Hague, Richard (2017) Hierarchical remeshing strategies with mesh mapping for topology optimisation. International Journal for Numerical Methods in Engineering . ISSN 1097-0207

Park, J., Sreeja, V., Aquino, M., Cesaroni, C., Spogli, L., Dodson, A. and De Franceschi, G. (2016) Performance of ionospheric maps in support of long baseline GNSS kinematic positioning at low latitudes. Radio Science, 51 (5). pp. 429-442. ISSN 1944-799X

Park, J., Vadakke Veettil, Sreeja, Aquino, Marcio, Yang, Lei and Cesaroni, Claudio (2017) Mitigation of ionospheric effects on GNSS positioning at low latitudes. Navigation, 64 (1). pp. 67-74. ISSN 2161-4296

Parra, David, Norman, Stuart A., Walker, Gavin S. and Gillott, Mark (2016) Optimum community energy storage system for demand load shifting. Applied Energy, 174 . pp. 130-143. ISSN 0306-2619

Parry, L., Ashcroft, Ian and Wildman, Ricky D. (2016) Understanding the effect of laser scan strategy on residual stress in selective laser melting through thermo-mechanical simulation. Additive Manufacturing, 12 (A). pp. 1-15. ISSN 2214-8604

Parsons, Andrew J., Walton, Kirsty, Hild, Frederic, Ilchev, Alex, Gimeno-Fabra, Miquel, Tomczynska, Magdelena M., Ward, Michael, Canciani, Alessia, Choong, Gabriel Y.H., De Focatiis, Davide S.A., Lester, Edward, Grant, David M. and Irvine, Derek J. (2016) Melt-processed PLA/HA platelet nanoparticle composites produced using tailored dispersants. In: The 5th International Conference of Bionic Engineering, 21 - 24 June 2016, Ningbo, China. (Unpublished)

Parsons, Sarah and Cobb, Sue (2014) Reflections on the role of the ‘users’: challenges in a multi-disciplinary context of learner-centred design for children on the autism spectrum. International Journal of Research & Method in Education, 37 (4). pp. 421-441. ISSN 1743-7288

Parthasarathy, Shridharan, Gomes, R.L. and Manickam, Sivakumar (2016) Process intensification of anaerobically digested palm oil mill effluent (AAD-POME) treatment using combined chitosan coagulation, hydrogen peroxide (H2O2) and Fenton’s oxidation. Clean Technologies and Environmental Policy, 18 (1). pp. 219-230. ISSN 1618-9558

Parthasarathy, Shridharan, Mohammed, Rafie Rushdy, Fong, Chong Mei, Gomes, R.L. and Manickam, Sivakumar (2016) A novel hybrid approach of activated carbon and ultrasound cavitation for the intensification of palm oil mill effluent (POME) polishing. Journal of Cleaner Production, 112 (1). pp. 1218-1226. ISSN 1879-1786

Patel, R., Tanaka, Y., McWilliam, Stewart, Mutsuda, H. and Popov, Atanas A. (2016) Model refinements and experimental testing of highly flexible piezoelectric energy harvesters. Journal of Sound and Vibration, 368 . pp. 87-102. ISSN 0022-460X

Patel, Rikesh, Achamfuo-Yeboah, Samuel, Light, Roger and Clark, Matt (2012) Ultrastable heterodyne interferometer system using a CMOS modulated light camera. Optics Express, 20 (16). pp. 17722-17733. ISSN 1094-4087

Patel, Rikesh, Achamfuo-Yeboah, Samuel, Light, Roger and Clark, Matt (2011) Widefield heterodyne interferometry using a custom CMOS modulated light camera. Optics Express, 19 (24). pp. 24546-24556. ISSN 1094-4087

Patel, Rikesh, Achamfuo-Yeboah, Samuel, Light, Roger A. and Clark, Matt (2014) Widefield two laser interferometry. Optics Express, 22 (22). pp. 27094-27101. ISSN 1094-4087

Patel, Rikesh, Clark, Matt and Achamfuo-Yeboah, Samuel (2011) Widefield ultrastable heterodyne interferometry using a custom CMOS modulated light camera. In: Applied Industrial Optics: Spectroscopy, Imaging and Metrology 2011, 10–14 July 2011, Toronto, Canada.

Patel, Rikesh, Hirsch, Matthias, Dryburgh, Paul, Pieris, Don, Achamfuo-Yeboah, Samuel, Smith, Richard J., Light, Roger A., Sharples, Steve D., Clare, Adam T. and Clark, Matt (2018) Imaging material texture of as-deposited selective laser melted parts using spatially resolved acoustic spectroscopy. Applied Sciences, 8 (10). 1991/1-1991/15. ISSN 2076-3417

Patel, Rikesh, Li, Wenqi, Smith, Richard J., Sharples, Steve D. and Clark, Matt (2017) Orientation imaging of macro-sized polysilicon grains on wafers using spatially resolved acoustic spectroscopy. Scripta Materialia, 140 . pp. 67-70. ISSN 1359-6462

Patel, Rupesh, Tanaka, Yoshikazu, McWilliam, Stewart, Mutsuda, Hidemi and Popov, Atanas A. (2017) Simply-supported multi-layered beams for energy harvesting. Journal of Intelligent Material Systems and Structures, 28 (6). pp. 740-759. ISSN 1045-389X

Patel, U., Moss, R.M., Hossain, Kazi Md Zakir, Kennedy, Andrew R., Ahmed, Ifty and Hannon, Alex C. (2017) Structural and physico-chemical analysis of calcium/ strontium substituted, near-invert phosphate based glasses for biomedical applications. Acta Biomaterialia, 60 . pp. 109-127. ISSN 1878-7568

Paternostro, S., Moore, Terry, Hill, C., Atkin, J., de Maere, Geert and Morvan, Herve (2017) Integration of an ARAIM algorithm in the development of an instrument approach procedure and for pre-flight operational briefing. In: International Navigation Conference of the Royal Institute of Navigation (INC 16), 8-10 November 2016, Glasgow, U.K..

Paternostro, S., Moore, Terry, Hill, Chris, Atkin, Jason and Morvan, Herve (2016) Evaluation of advanced receiver autonomous integrity monitoring performance on predicted aircraft trajectories. In: IEEE/ION PLANS 2016, 11-14 Apr 2016, Savannah, GA.

Paternostro, S., Moore, Terry, Hill, Chris, Atkin, Jason, de Maere, Geert and Morvan, Herve (2017) Examples of user algorithms implementing ARAIM techniques for integrity performance prediction, procedures development and pre-flight operations. In: 8th ESA workshop on Satellite Navigation Technologies and European Workshop on GNSS Signals and Signal Processing (NAVITEC), 14-16 Dec 2016, Amsterdam, The Netherlands.

Paterson, Oliver, Wang, Bofu and Mao, Xuerui (2018) Coherent structures in the breakdown bubble of a vortex flow. AIAA Journal, 56 (5). 1812 -1817. ISSN 1533-385X

Pearson, S.R. and Shipway, P.H. (2014) Is the wear coefficient dependent upon slip amplitude in fretting?: Vingsbo and Söderberg revisited. Wear, 330 . pp. 93-102. ISSN 1873-2577

Pearson, S.R., Shipway, P.H., Abere, J.O. and Hewitt, R.A.A. (2013) The effect of temperature on wear and friction of a high strength steel in fretting. Wear, 303 (1-2). pp. 622-631. ISSN 0043-1648

Pecchia, Leandro, Bath, Peter A., Pendleton, Neil and Bracale, Marcello (2011) Use of the Analytic Hierarchy Process (AHP) for examining healthcare professionals’ assessments of the relative importance of risk factors for falls in community-dwelling older people. Methods of Information in Medicine, 50 (5). pp. 435-444. ISSN 0026-1270

Pecchia, Leandro, Bath, Peter A., Pendleton, Neil and Bracale, Marcello (2010) Web-based system for assessing risk factors for falls in community-dwelling elderly people using the Analytic Hierarchy Process. Internationa Journal of the Analytic Hierarchy Process, 2 (2).

Pecchia, Leandro and Craven, Michael P. (2013) Early stage health technology assessment (HTA) of biomedical devices: the MATCH experience. In: World Congress on Medical Physics and Biomedical Engineering, May 26-31 2012, Beijing, China. IFMBE proceedings (39). Springer, Berlin. ISBN 978-3-642-29304-7

Pecchia, Leandro, Martin, Jennifer L., Ragozzino, Angela, Vanzanella, Carmela, Scognamiglio, Arturo, Mirarchi, Luciano and Morgan, Stephen P. (2013) User needs elicitation via analytic hierarchy process (AHP): a case study on a Computed Tomography (CT) scanner. BMC Medical Informatics and Decision Making, 13 (2). pp. 1-11. ISSN 1472-6947

Pecchia, Leandro, Melillo, Paolo and Bracale, Marcello (2011) Discrimination power of short-term heart rate variability measures for CHF assessment. IEEE Transactions on Information Technology in Biomedicine, 15 (1). pp. 40-46. ISSN 1089-7771

Pecchia, Leandro, Melillo, Paolo and Marcello, Bracale (2011) Remote Health Monitoring of heart failure with data mining via CART method on HRV features. IEEE Transactions on Biomedical Engineering, 58 (3). pp. 800-804. ISSN 0018-9294

Pecchia, Leandro, Schiraldi, Fernando, Verde, Sossio, Mirante, Enrico, Bath, Peter A. and Bracale, Marcello (2010) Evaluation of short-term effectiveness of the disease management program “Di.Pro.Di.” on continuity of care of patients with congestive heart failure. Journal of the American Geriatrics Society, 58 (8). pp. 1603-1604. ISSN 0002-8614

Peltola, Pekka, Hill, Chris and Moore, Terry (2018) Adaptive real-time dual-mode filter design for seamless pedestrian navigation. In: 2017 International Conference on Localization and GNSS (ICL-GNSS), 27-29 Jun 2017, Nottingham, UK.

Peltola, Pekka, Hill, Chris and Moore, Terry (2016) Particle filter for context sensitive indoor pedestrian navigation. In: 2016 International Conference on Localization and GNSS, ICL-GNSS 2016, 28-30 June 2016, Barcelona, Spain.

Peltola, Pekka and Moore, Terry (2017) Towards seamless navigation. In: Multi-technology positioning. Springer International Publishing, Cham, pp. 125-147. ISBN 9783319504261

Pepper, Katie, Masson, Timothé, De Focatiis, Davide S.A. and Howdle, Steven M. (2017) Can a combination of poly(ethylene glycol) and dense phase carbon dioxide improve processing of polylactide? A high pressure rheology investigation. Journal of Supercritical Fluids, 133 (1). pp. 343-348. ISSN 1872-8162

Peris, Edgar, Okafor, Obinna, Kulchinskaja, Evelina, Goodridge, Ruth D., Luis, Santiago V., Garcia-Verdugo, Eduardo, O'Reilly, Elaine and Sans, Victor (2017) Tuneable 3D printed bioreactors for transaminations under continuous-flow. Green Chemistry, 19 (22). pp. 5345-5349. ISSN 1463-9270

Perrat, Bertrand, Smith, Martin J., Mason, Barry S., Rhodes, James M. and Goosey-Tolfrey, Victoria L. (2015) Quality assessment of an Ultra-Wide Band positioning system for indoor wheelchair court sports. Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, 229 (2). pp. 81-91. ISSN 1754-338X

Phang, Sendy, Vukovic, Ana, Creagh, Stephen, Gradoni, Gabriele, Sewell, Phillip and Benson, Trevor M. (2016) Time-modulated gain and loss parity-time symmetric resonators. In: 24th International Workshop on Optical Wave & Waveguide Theory and Numerical Modelling (OWTNM 2016), 20-21 May 2016, Warsaw, Poland. (Unpublished)

Pickup, Laura, Atkinson, Sarah, Hollnagel, Erik, Bowie, Paul, Gray, Sandra, Rawlinson, Sam and Forrester, Kate (2017) Blood sampling: two sides to the story. Applied Ergonomics, 59A . pp. 234-242. ISSN 1872-9126

Pickup, Laura, Lang, Alexandra, Atkinson, Sarah and Sharples, Sarah (2017) The dichotomy of the application of a systems approach in UK healthcare: the challenges and priorities for implementation. Ergonomics, 61 (1). pp. 15-25. ISSN 1366-5847

Pierce-Brown, Jack, Neves, Luis C. and Brown, Donald L. (2018) Uncertainty quantification for random fields estimated from effective moduli of elasticity. In: 8th International Workshop on Reliable Computing "Computing with Confidence", 16-18 July 2018, University of Liverpool, Liverpool, UK.

Pimm, Andrew James, Garvey, Seamus D. and Kantharaj, Bharath (2015) Economic analysis of a hybrid energy storage system based on liquid air and compressed air. Journal of Energy Storage, 4 . pp. 24-35. ISSN 2352-1538

Pinchin, James, Smith, Gavin, Hill, Chris, Moore, Terry and Loram, Ian (2014) The potential of electromyography to aid personal navigation. In: 27th International Technical Meeting of The Satellite Division of the Institute of Navigation (ION GNSS+ 2014), 8-12 Sept 2014, Tampa, Florida.

Polenta, Valerio, Garvey, Seamus D., Chronopoulos, Dimitrios, Long, Andy C. and Morvan, Herve (2016) Novel stiffeners exploiting internal pressurisation to enhance buckling behaviour under bending loads. Thin-Walled Structures, 105 . pp. 81-89. ISSN 0263-8231

Porter, Nicole (2017) Australian Alps: Kosciuszko, Alpine and Namadgi National Parks. Reviewed: Australian Alps: Kosciuszko, Alpine and Namadgi National Parks (Second Edition) By Deidre Slattery. Clayton South, Australia: CSIRO Publishing, 2015. xvii + 302 pp. AU$ 45.00, US$ 35.95. ISBN 978-1-486-30171-3. Mountain Research and Development, 37 (1). pp. 163-164. ISSN 1994-7151

Pourbafrani, Mohammad, McKechnie, Jon, Shen, Timothy, Saville, Bradley A. and MacLean, Heather L. (2014) Impacts of pre-treatment technologies and co-products on greenhouse gas emissions and energy use of lignocellulosic ethanol production. Journal of Cleaner Production, 78 . pp. 104-111. ISSN 1879-1786

Powell, J., Al-Mashikhi, S.O., Kaplan, A.F.H. and Voisey, K.T. (2011) Fibre laser cutting of thin section mild steel: an explanation of the 'striation free' effect. Optics and Lasers in Engineering, 49 (8). pp. 1069-1075. ISSN 0143-8166

Prescott, Darren and Andrews, John D. (2014) Modelling the effects of asset management decisions on a railway track section. In: 2nd International Conference on Railway Technology: Research, Development and Maintenance, 8-11 April 2014, Ajaccio, Corsica, France.

Prikryl, P., Ghoddousi-Fard, R., Spogli, L., Mitchell, C.N., Li, G., Ning, B., Cilliers, P.J., Sreeja, V., Aquino, M., Terkildsen, M., Jayachandran, P.T., Jiao, Y., Morton, Y.T., Ruohoniemi, J.M., Thomas, E.G., Zhang, Y., Weatherwax, A.T., Alfonsi, L., De Franceschi, G. and Romano, V. (2015) GPS phase scintillation at high latitudes during geomagnetic storms of 7-17 March 2012, part 2: interhemispheric comparison. Annales Geophysicae, 33 . pp. 657-670. ISSN 0992-7689

Prince, Rawle, Byrne, Matthew and Parry, Tony (2016) Meta-analytic framework for efficiently identifying progression groups in highway condition analysis. Journal of Computing in Civil Engineering, 30 (3). 04015044. ISSN 1943-5487

Pulsford, J., Kamnis, S., Murray, J., Bai, M. and Hussain, Tanvir (2017) Effect of particle and carbide grain sizes on a HVOAF WC-Co-Cr coating for the future application on internal surfaces: microstructure and wear. Journal of Thermal Spray Technology . ISSN 1544-1016

Pérez, Pablo, Syam, Wahyudin P., Albajez, José Antonio, Santolaria, Jorge and Leach, Richard (2018) Lateral error compensation for focus variation microscopy. In: 18th EUSPEN International Conference & Exhibition, 4–8 June 2018, Venice, Italy.

Pérez López, Iker, Brown, Michael, Pinchin, James, Martindale, Sarah, Sharples, Sarah, Shaw, Dominick E. and Blakey, John (2016) Out of hours workload management: Bayesian inference for decision support in secondary care. Artificial Intelligence in Medicine . ISSN 1873-2860

Pérez López, Iker, Pinchin, James, Brown, Michael, Blum, Jesse and Sharples, Sarah (2016) Unsupervised labelling of sequential data for location identification in indoor environments. Expert Systems with Applications . ISSN 0957-4174

Qi, Cong, Wang, Guiqing, Yan, Yuying, Mei, Siyuan and Luo, Tao (2018) Effect of rotating twisted tape on thermo-hydraulic performances of nanofluids in heat-exchanger systems. Energy Conversion and Management, 166 . pp. 744-757. ISSN 0196-8904

Qian, Lingyi, Xu, Fang, Voisey, K.T., Nekouie, Vahid, Zhou, Zhaoxia, Silberschmidt, Vadim V. and Hou, Xianghui (2017) Incorporation and evolution of ZrO2 nano-particles in Pt-modified aluminide coating for high temperature applications. Surface and Coatings Technology, 311 . pp. 238-247. ISSN 1879-3347

Qiao, Yaning, Dawson, Andrew, Huvstig, Anders and Korkiala-Tanttu, Leena (2015) Calculating rutting of some thin flexible pavements from repeated load triaxial test data. International Journal of Pavement Engineering, 16 (6). pp. 467-476. ISSN 1029-8436

Rahimi, M., Moghaddas Tafreshi, S.N., Leshchinsky, B. and Dawson, A.R. (2018) Experimental and numerical investigation of the uplift capacity of plate anchors in geocell-reinforced sand. Geotextiles and Geomembranes, 46 (6). pp. 801-816. ISSN 0266-1144

Rama, Dovile and Andrews, John D. (2016) Railway infrastructure asset management: the whole-system life cost analysis. IET Intelligent Transport Systems, 10 (1). pp. 58-64. ISSN 1751-9578

Rama, Dovile and Andrews, John D. (2015) A holistic approach to railway infrastructure asset management. International Journal of Performability Engineering, 11 (2). pp. 107-120. ISSN 0973-1318

Rama, Dovile and Andrews, John D. (2014) System-wide assessment of intervention strategies for railway infrastructure. In: 8th International Conference on Modelling in Industrial Maintenance and Reliability (MIMAR), 10-12 July 2014, Oxford, UK.

Ramadan, Mohamed Elamin, Omer, Siddig and Riffat, Saffa (2016) A novel high capacity space efficient heat storage system for domestic applications. In: Solar TR2016: Solar Conference & Exhibition, 6-8 Dec 2016, Istanbul, Turkey.

Reddy, Liam, Shipway, P.H., Davis, Colin and Hussain, Tanvir (2017) HVOF and laser cladded Fe-Cr-B coating in simulated biomass combustion: microstructure and fireside corrosion. Oxidation of Metals . ISSN 1573-4889

Reed, Sean (2017) An efficient algorithm for exact computation of system and survival signatures using binary decision diagrams. Reliability Engineering & System Safety, 165 . pp. 257-267. ISSN 0951-8320

Reed, Sean, Karlberg, Magnus, Kyosti, Petter and Sas, Daria (2018) Quantified economic and environmental values through Functional Productization: a simulation approach. Environmental Impact Assessment Review, 70 . pp. 71-80. ISSN 0195-9255

Reed, Sean and Löfstrand, Magnus (2016) Estimating the availability of hydraulic drive systems operating under different functional profiles through simulation. Safety and Reliability, 35 (2). pp. 4-19. ISSN 2469-4126

Reed, Sean, Löfstrand, Magnus, Karlsson, Lennart and Andrews, John (2016) Analysis of the contributions to the performance of a functional product design using simulation. Safety and Reliability, 34 (2). pp. 41-61. ISSN 2469-4126

Reed, Sean, Remenyte-Prescott, Rasa and Rees, Ben (2017) Effect of venepuncture process design on efficiency and failure rates: a simulation model study for secondary care. International Journal of Nursing Studies, 68 . pp. 73-82. ISSN 0020-7489

Reed, Sean, Remenyte-Prescott, Rasa and Rees, Ben (2016) Reliability assessment techniques for medical procedures. In: 21st Advances in Risk and Reliability Technology Symposium 2015, 23-25 June 2015, Loughborough, UK.

Reeves, J., Remenyte-Prescott, R., Andrews, J. and Thorley, Paul (2018) A sensor selection method using a performance metric for phased missions of aircraft fuel systems. Reliability Engineering and System Safety, 180 . pp. 416-424. ISSN 0951-8320

Reeves, J., Remenyte-Prescott, Rasa and Andrews, John (2017) A sensor selection method for fault diagnostics. In: Safety and Reliability – Theory and Application: ESREL 2017. CRC Press. ISBN 9781138629370

Rengasamy, Divish, Morvan, Herve and Figueredo, Grazziela P. (2018) Deep learning approaches to aircraft maintenance, repair and overhaul: a review. In: 21st IEEE International Conference on Intelligent Transportation Systems, 4-7 November 2018, Maui, Hawaii, USA. (In Press)

Reyes, F., Lin, Q., Udoudo, O.B., Dodds, Chris, Lee, P.D. and Neethling, S.J. (2017) Calibrated X-ray micro-tomography for mineral ore quantification. Minerals Engineering, 110 . pp. 122-130. ISSN 0892-6875

Rhodes, James M., Mason, Barry S., Perrat, Bertrand, Smith, Martin and Goosey-Tolfrey, Victoria L. (2014) The validity and reliability of a novel indoor player tracking system for use within wheelchair court sports. Journal of Sports Sciences, 32 (17). pp. 1639-1647. ISSN 0264-0414

Rhodes, James M., Mason, Barry S., Perrat, Bertrand, Smith, Martin J., Malone, Laurie A. and Goosey-Tolfrey, Victoria L. (2015) Activity profiles of elite wheelchair rugby players during competition. International Journal of Sports Physiology and Performance, 10 (3). pp. 318-324. ISSN 1555-0273

Ribeiro, Filipe L.A., Barbosa, Andre R., Scott, Michael H. and Neves, Luis C. (2015) Deterioration modeling of steel moment resisting frames using finite-length plastic hinge force-based beam-column elements. Journal of Structural Engineering, 141 (2). 04014112/1-04014112/12. ISSN 1943-541X

Ribeiro, Filipe L.A., Barbosa, André R. and Neves, Luís C. (2014) Application of reliability-based robustness assessment of steel moment resisting frame structures under post-mainshock cascading events. Journal of Structural Engineering, 140 (8). A4014008/1-A4014008/12. ISSN 1943-541X

Ribeiro, Filipe L.A., Neves, Luis A.C. and Barbosa, Andre R. (2017) Implementation and calibration of finite-length plastic hinge elements for use in seismic structural collapse analysis. Journal of Earthquake Engineering . pp. 1-22. ISSN 1363-2469

Richardson, Terri, Hill, Chris, Moore, Terry and Toor, Pieter (2016) Analysis of multi-constellation GNSS signal quality. In: 2016 International Technical Meeting of The Institute of Navigation, 25-28 Jan 2016, Monterey, California.

Roberts, Gethin W., Brown, Christopher J., Meng, Xiaolin, Ogundipe, Oluropo, Atkins, Christopher and Colford, Barry (2012) Deflection and frequency monitoring of the Forth Road Bridge, Scotland, by GPS. Proceedings of the ICE - Bridge Engineering, 165 (2). pp. 105-123. ISSN 1478-4637

Roberts, Gethin Wyn, Brown, C.J. and Tang, X. (2017) Correlated GNSS and temperature measurements at 10-minute intervals on the Severn Suspension Bridge. Applied Geomatics, 9 (2). pp. 115-124. ISSN 1866-928X

Roberts, Gethin Wyn and Tang, X. (2016) Correlation of the movements of the Severn Suspension Bridge derived with GNSS with temperature variations. In: 3rd Joint International Symposium on Deformation Monitoring (JISDM), 30 March - 1 April 2016, Vienna, Austria.

Roberts, Simon, Bonenberg, Lukasz, Meng, Xiaolin, Moore, Terry and Hill, Chris (2017) Predictive intelligence for a rail traffic management system. In: 30th International Technical Meeting of The Satellite Division of the Institute of Navigation (ION GNSS+ 2017), 25-29 September 2017, Portland, Oregon, USA.

Roberts, Simon J., Bonenberg, Lukasz K., Jing, Hao, Sowter, Andrew, Meng, Xiaolin, Moore, Terry, Hill, Chris and Bhatia, Paul (2017) Monitoring rail infrastructure using multisensor navigation on a moving platform and autonomous robots. In: 30th International Technical Meeting of The Satellite Division of the Institute of Navigation (ION GNSS+ 2017), 25-29 September 2017, Portland, Oregon, USA.

Robinson, John, Dodds, Chris, Stavrinides, Alexander, Kingman, Sam, Katrib, Juliano, Wu, Zhiheng, Medrano, Jose and Overend, Ralph (2015) Microvawe pyrolysis of biomass: control of process parameters for high pyrolysis oil yields and enhanced oil quality. Energy and Fuels, 29 (3). pp. 1701-1709. ISSN 1520-5029

Robinson, John P., Binner, Eleanor, Saeid, Abdul, Al-Harahsheh, Mohammad and Kingman, S.W. (2014) Microwave processing of oil sands and contribution of clay minerals. Fuel, 135 . pp. 153-161. ISSN 1873-7153

Rodrigues, Leonardo G., Branco, Jorge M., Neves, Luís C. and Barbosa, André R. (2017) Seismic assessment of a heavy-timber frame structure with ring-doweled moment-resisting connections. Bulletin of Earthquake Engineering . pp. 1-31. ISSN 1573-1456

Rodrigues, Lucélia Taranto, Marsh, Julian, Kiamba, Lorna, Gillott, Mark C. and O'Doherty, Travis (2016) The case for localised energy management to support resilient cities. In: PLEA 2016, 11-13 July 2016, Los Angeles, USA.

Rollinson, Andrew (2016) Gasification reactor engineering approach to understanding the formation of biochar properties. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 472 (2192). ISSN 1471-2946

Romanova, Elena, Kuzyutkina, Yulia, Shiryaev, Vladimir, Abdel-Moneim, Nabil, Furniss, David, Benson, Trevor, Seddon, Angela and Guizard, Stephane (2018) Measurement of non-linear optical coefficients of chalcogenide glasses near the fundamental absorption band edge. Journal of Non-Crystalline Solids, 480 . pp. 13-17. ISSN 1873-4812

Roper, Tessa, Dutka, Laura Millen, Cobb, Sue and Patel, Harshada (2018) Collaborative virtual environment to facilitate game design evaluation with children with ASC. International Journal of Human-Computer Interaction . ISSN 1532-7590

Roper, Tessa, Lawson, Glyn and Abdullah, Che (2017) Development of a low-cost multimodal VR system for engineering design. In: Designing Interactive Systems 2017 (DIS 2017), 10-14 June 2017, Edinburgh, UK.

Rosser, Julian, Morley, Jeremy and Smith, Gavin (2015) Modelling of building interiors with mobile phone sensor data. ISPRS International Journal of Geo-Information, 4 (2). pp. 989-1012. ISSN 2220-9964

Rosser, Julian F., Leibovici, Didier and Jackson, M.J. (2017) Rapid flood inundation mapping using social media, remote sensing and topographic data. Natural Hazards . ISSN 1573-0840

Rosser, Julian F., Smith, Gavin and Morley, Jeremy (2017) Data driven estimation of building interior plans. International Journal of Geographical Information Science, 31 (8). pp. 1652-1674. ISSN 1365-8824

Rossoni, Luca, Carr, Reuben, Baxter, Scott, Cortis, Roxann, Thorpe, Thomas, Eastham, Graham and Stephens, Gill (2018) Engineering Escherichia coli to grow constitutively on D-xylose using the carbon-efficient Weimberg pathway. Microbiology, 164 (3). pp. 287-298. ISSN 1465-2080

Ruiz de la Oliva, Andreu, Sans, Victor, Miras, Haralampos N., Long, De-Liang and Cronin, Leroy (2017) Coding the assembly of polyoxotungstates with a programmable reaction system. Inorganic Chemistry, 56 . pp. 5089-5095. ISSN 1520-510X

Ruiz-Cantu, Laura, Gleadall, Andrew, Faris, Callum, Segal, Joel, Shakesheff, Kevin M. and Yang, Jing (2016) Characterisation of the surface geometry of 3D printed scaffolds for cell infiltration and surgical suturing. Biofabrication, 8 (1). 015016/1-015016/12. ISSN 1758-5090

Russell, J.M., Owen, J.S. and Hajirasouliha, I. (2015) Experimental investigation on the dynamic response of RC flat slabs after a sudden column loss. Engineering Structures, 99 . pp. 28-41. ISSN 0141-0296

Russell, Scott, Turrion-Gomez, Juan Luis, Meredith, Will, Langston, Paul A. and Snape, Colin E. (2017) Increased charcoal yield & production of lighter oils from the slow pyrolysis of biomass. Journal of Analytical and Applied Pyrolysis, 124 . pp. 536-541. ISSN 0165-2370

Ryan, Brendan (2017) Developing a framework of behaviours before suicides at railway locations. Ergonomics, 61 (5). pp. 605-626. ISSN 1366-5847

Ryan, Brendan, Kallberg, Veli-Pekka, Rådbo, Helena, Havârneanu, Grigore M., Silla, Anne, Lukaschek, Karoline, Burkhardt, Jean-Marie, Bruyelle, Jean-Luc, El-Koursih, El-Miloudi, Beurskens, Eric and Hedqvist, Maria (2018) Collecting evidence from distributed sources to evaluate railway suicide and trespass prevention measures. Ergonomics . ISSN 1366-5847

Ryan, Brendan, Wronska, Urszula and Stevens, Ian (2017) Evaluating rail suicide prevention measures. In: 6th International Human Factors Rail Conference, 6-9 Nov 2017, London, UK.

Sabard, Alexandre, Lovelock, H.L. de Villiers and Hussain, Tanvir (2017) Microstructural evolution in solution heat treatment of gas- atomised Al alloy (7075) powder for cold spray. Journal of Thermal Spray Technology . pp. 1-14. ISSN 1544-1016

Sabatini, Roberto, Moore, Terry and Hill, Chris (2016) Avionics-Based GNSS Integrity Augmentation for UAS mission planning and real-time trajectory optimisation. In: 29th International Technical Meeting of The Satellite Division of the Institute of Navigation (ION GNSS+ 2016), 12-16 Sep 2016, Portland, Oregon, USA.

Sabatini, Roberto, Moore, Terry and Hill, Chris (2015) Assessing GNSS integrity augmentation techniques in UAV sense-and-avoid architectures. In: AIAC16: 16th Australian International Aerospace Congress, 23-24 February 2015, Melbourne, Australia.

Sabatini, Roberto, Moore, Terry and Hill, Chris (2014) GNSS avionics-based integrity augmentation for RPAS detect-and-avoid applications. In: Fourth Australasian Unmanned Systems Conference, 2014 (ACUS 2014), 10-12 Dec 2014, Melbourne, Australia.

Sabatini, Roberto, Moore, Terry and Hill, Chris (2014) Avionics-based GNSS integrity augmentation for unmanned aerial systems sense-and-avoid. In: 27th International Technical Meeting of The Satellite Division of the Institute of Navigation (ION GNSS+ 2014), 8-12 Sept 2014, Tampa, Florida.

Sabatini, Roberto, Moore, Terry, Hill, Chris, Gardi, Alessandro, Ramasamy, Subramanian and Gilgien, Michael (2016) Trajectory optimisation for avionics-based GNSS integrity augmentation system. In: IEEE/AIAA 35th Digital Avionics Systems Conference (DASC), 25-29 Sep 2016, Sacramento, USA.

Sabatini, Roberto, Moore, Terry, Hill, Chris and Ramasamy, Subramanian (2015) Investigation of GNSS integrity augmentation synergies with unmanned aircraft sense-and-avoid systems. In: SAE 2015 AeroTech Congress and Exhibition, 22-24 Sept 2015, Seattle, Washington, USA.

Sabatini, Roberto, Moore, Terry, Hill, Chris and Ramasamy, Subramanian (2015) Evaluating GNSS integrity augmentation techniques for UAS sense-and-avoid. In: 2nd IEEE International Workshop on Metrology for Aerospace (MetroAeroSpace), 3-5 Jun 2015, Benevento, Italy.

Sabatini, Roberto, Moore, Terry, Hill, Chris and Ramasamy, Subramanian (2015) Assessing avionics-based GNSS integrity augmentation performance in UAS mission- and safety-critical tasks. In: 2015 International Conference on Unmanned Aircraft Systems (ICUAS), 9-12 June 2015, Denver, Colorado, USA.

Sabatini, Roberto, Moore, Terry, Hill, Chris and Subramanian, Ramasamy (2015) Avionics-based GNSS integrity augmentation performance in a jamming environment. In: AIAC16: 16th Australian International Aerospace Congress, 23-24 February 2015, Melbourne, Australia.

Saeidi, S, Voisey, K.T. and McCartney, D.G. (2011) Mechanical properties and microstructure of VPS and HVOF CoNiCrAlY coatings. Journal of Thermal Spray Technology, 20 (6). pp. 1231-1243. ISSN 1059-9630

Saidj, Faiza, Kibboua, Rachid, Azzi, Abdelwahid, Ababou, Noureddine and Azzopardi, Barry J. (2014) Experimental investigation of air–water two-phase flow through vertical 90° bend. Experimental Thermal and Fluid Science, 57 . pp. 226-234. ISSN 0894-1777

Saint, Reece, Evans, William, Zhou, Yijia, Barrett, Thomas J., Fromhold, T.M., Saleh, Ehab, Maskery, Ian, Tuck, Christopher, Wildman, Ricky D., Orucevic, Fedja and Krüger, Peter (2018) 3D-printed components for quantum devices. Scientific Reports, 8 . p. 8368. ISSN 2045-2322

Sakr, Hesham, Tang, Zhuoqi, Furniss, David, Sojka, Lukasz, Sujecki, S., Benson, Trevor M. and Seddon, Angela B. (2017) Promising emission behavior in Pr 3+ /In selenide-chalcogenide-glass small-core step index fiber (SIF). Optical Materials, 67 . pp. 98-107. ISSN 1873-1252

Saleh, Ehab, Woolliams, Peter, Clarke, Bob, Gregory, Andrew, Greedy, Steve, Smartt, Chris, Wildman, Ricky D., Ashcroft, Ian, Hague, Richard J.M., Dickens, Phill and Tuck, Christopher (2017) 3D inkjet-printed UV-curable inks for multi-functional electromagnetic applications. Additive Manufacturing, 13 . pp. 143-148. ISSN 2214-8604

Saleh, Ehab, Zhang, Fan, He, Yinfeng, Vaithilingam, Jayasheelan, Fernandez, Javier Ledesma, Wildman, Ricky D., Ashcroft, Ian, Hague, Richard J.M., Dickens, Phill and Tuck, Christopher (2017) 3D inkjet printing of electronics using UV conversion. Advanced Materials Technologies, 2 (10). 1700134/1-1700134/8. ISSN 2365-709X

Salerno, G., Bennett, C.J., Sun, W. and Becker, A.A. (2017) Residual stress analysis and finite element modelling of repair-welded titanium sheets. Welding in the World, 61 (6). pp. 1211-1223. ISSN 0043-2288

Salerno, Gervasio, Bennett, Chris, Sun, Wei, Becker, Adib, Palumbo, Nunzio, Kelleher, Joe and Zhang, Shu Yan (2018) On the interaction between welding residual stresses: a numerical and experimental investigation. International Journal of Mechanical Sciences . ISSN 0020-7403 (In Press)

Salerno, Gervasio, Bennett, Chris, Sun, Wei and Becker, Adib A. (2018) An experimental and numerical investigation on the process efficiency of the focused TIG welding of Inconel 718 thick plates. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture . ISSN 2041-2975 (In Press)

Sanderson, David, Chaplin, Jack and Ratchev, Svetan (2018) Common shared system model for evolvable assembly systems. In: Model-Based Enterprise Summit 2018, 2-5 April 2018, Gaithersburg, Md., USA.

Sanderson, David, Chaplin, Jack C. and Ratchev, Svetan (2018) Conceptual framework for ubiquitous cyber-physical assembly systems in airframe assembly. In: 16th IFAC Symposium on Information Control Problems in Manufacturing (INCOM 2018), 11-13 June 2018, Bergamo, Italy.

Sanderson, David, Chaplin, Jack C. and Ratchev, Svetan (2018) Functional modelling in evolvable assembly systems. In: 8th International Precision Assembly Seminar, 14-16 Jan 2018, Chamonix, France.

Sanjuan-Alberte, Paola, Alexander, Morgan R., Hague, Richard J.M. and Rawson, Frankie J. (2018) Electrochemically stimulating developments in bioelectronic medicine. Bioelectronic Medicine, 4 (1). ISSN 2332-8886

Sarce, Fernando, Hall, Matthew R., Sangchoom, Wantana and Mokaya, Robert (2015) A hygrothermal modelling approach to water vapour sorption isotherm design for mesoporous humidity buffers. Microporous and Mesoporous Materials, 211 . pp. 113-123. ISSN 1387-1811

Sarkar, Raju and Dawson, Andrew (2015) Economic assessment of use of pond ash in pavements. International Journal of Pavement Engineering . pp. 1-17. ISSN 1029-8436

Sarker, S., Chandra, D., Hirscher, M., Dolan, M., Isheim, D., Wermer, J., Viano, D., Baricco, M., Udovic, T.J., Grant, D., Palumbo, O., Paolone, A. and Cantelli, R. (2016) Developments in the Ni–Nb–Zr amorphous alloy membranes. Applied Physics A, 122 (3). 168/1-168/9. ISSN 1432-0630

Sarroza, Archi C., Bennet, Tom D., Eastwick, Carol and Liu, Hao (2016) Characterising pulverised fuel ignition in a visual drop tube furnace by use of a high-speed imaging technique. Fuel Processing Technology, 157 . pp. 1-11. ISSN 0378-3820

Scase, Matthew M., Baldwin, Kyle A. and Hill, Richard J.A. (2017) Rotating Rayleigh-Taylor instability. Physical Review Fluids, 2 (2). 024801. ISSN 2469-990X

Scase, Matthew M., Baldwin, Kyle A. and Hill, Richard J.A. (2016) Magnetically-induced rotating Rayleigh-Taylor instability. Journal of Visualized Experiments . ISSN 1940-087X (In Press)

Schiavon, Stefano and Altomonte, Sergio (2014) Influence of factors unrelated to environmental quality on occupant satisfaction in LEED and non-LEED certified buildings. Building and Environment, 77 . pp. 148-159. ISSN 1873-684X

Schindler, Steffen, Hegemann, Felix, Koch, Christian, König, Markus and Mark, Peter (2016) Radar interferometry based settlement monitoring in tunnelling: visualisation and accuracy analyses. Visualization in Engineering, 4 . 7/1-7/16. ISSN 2213-7459

Schmall, Paul and Dawson, Andrew (2017) Ground-freezing experience on the east side access Northern Boulevard crossing, New York. Proceedings of the Institution of Civil Engineers - Ground Improvement, 170 (GI3). pp. 159-172. ISSN 1755-0769

Seddon, Angela B., Furniss, David, Tang, Z.Q., Sójka, L., Benson, Trevor M., Caspary, R. and Sujecki, S. (2016) True mid-infrared Pr3+ absorption cross-section in a selenide-chalcogenide host-glass. In: 18th International Conference on Transparent Optical Networks, 10-14 July 2016, Trento, Italy. (In Press)

Senin, Nicola and Leach, Richard K. (2018) Information-rich surface metrology. Procedia CIRP, 75 . pp. 19-26. ISSN 2212-8271

Senin, Nicola, Thompson, Adam and Leach, Richard K. (2018) Feature-based characterisation of signature topography in laser powder bed fusion of metals. Measurement Science and Technology, 29 (4). 045009/1-045009/12. ISSN 1361-6501

Senin, Nicola, Thompson, Adam and Leach, Richard K. (2017) Feature-based characterisation of laser powder bed fusion surfaces. In: Joint Special Interest Group meeting between euspen and ASPE Dimensional Accuracy and Surface Finish in Additive Manufacturing, 10-12 October 2017, Leuven, Belgium.

Sesan, Temilade, Jewitt, Sarah, Clifford, Mike and Ray, Charlotte (2018) Toilet training: what can the cookstove sector learn from improved sanitation promotion? International Journal of Environmental Health Research . ISSN 1369-1619 (In Press)

Shah, Darshil U., Nag, Ranajit K. and Clifford, M.J. (2016) Why do we observe significant differences between measured and ‘back-calculated’ properties of natural fibres? Cellulose . pp. 1-10. ISSN 1572-882X

Shan, Liang, Kong, Ming, Bennet, Tom D., Sarroza, Archi C., Eastwick, Carol, Sun, Duo, Lu, Gang, Yan, Yong and Liu, Hao (2018) Studies on combustion behaviours of single biomass particles using a visualization method. Biomass and Bioenergy, 109 . pp. 54-60. ISSN 1873-2909

Shang, Hui, Berenguer, Christophe and Andrews, John (2017) Delayed maintenance modelling considering speed restriction for a railway section. Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability, 231 (4). pp. 411-428. ISSN 1748-0078

Shao, Yali, Zhang, Yong, Wang, Xiaojia, Wang, Xudong, Jin, Baosheng and Liu, Hao (2017) Three-dimensional full loop modeling and optimization of an in situ gasification chemical looping combustion system. Energy and Fuels . ISSN 1520-5029

Shao, Yiming, Heath, Tim and Zhu, Yan (2016) Developing an economic estimation system for vertical farms. International Journal of Agricultural and Environmental Information Systems, 7 (2). ISSN 1947-3206

Shao, Yiming, Heath, Timothy Peter and Zhu, Yan (2016) Developing an economic estimation system for vertical farms. International Journal of Agricultural and Environmental Information Systems . ISSN 1947-3206

Sharaf, Safa, Zednikova, Maria, Ruzicka, Marek C. and Azzopardi, Barry J. (2016) Global and local hydrodynamics of bubble columns: effect of gas distributor. Chemical Engineering Journal, 288 . pp. 489-504. ISSN 1385-8947

Sharaf, Safa, van der Meulen, G. Peter, Agunlejika, Ezekiel O. and Azzopardi, Barry J. (2016) Structures in gas–liquid churn flow in a large diameter vertical pipe. International Journal of Multiphase Flow, 78 . pp. 88-103. ISSN 0301-9322

Sharmin, Nusrat, Gu, Fu, Ahmed, Ifty and Parsons, Andrew J (2017) Compositional dependency on dissolution rate and cytocompatibility of phosphate-based glasses: effect of B2O3 and Fe2O3 addition. Journal of Tissue Engineering, 8 . pp. 1-10. ISSN 2041-7314

Sharples, Sarah, Martin, Jennifer L., Lang, Alexandra, Craven, Michael P., O'Neil, Sonja and Barnett, Julie (2012) Medical device design in context: a model of user–device interaction and consequences. Displays, 33 (4-5). pp. 221-232. ISSN 0141-9382

Shen, M., Furniss, David, Tang, Z., Barney, Emma R., Sójka, L., Sujecki, S., Benson, Trevor M. and Seddon, Angela B. (2018) Modeling of resonantly pumped mid-infrared Pr3+-doped chalcogenide fiber amplifier with different pumping schemes. Optics Express, 26 (18). ISSN 1094-4087

Sheng, Jingyu and Prescott, Darren (2015) Using coloured Petri nets to investigate fleet cannibalisation. International Journal of Comadem, 18 (2). ISSN 1363-7681

Shepherd, B.J., Ryan, J., Adam, M., Beneroso Vallejo, D., Castaño, P., Kostas, E.T. and Robinson, J.P. (2018) Microwave pyrolysis of biomass within a liquid medium. Journal of Analytical and Applied Pyrolysis, 134 . pp. 381-388. ISSN 0165-2370

Siddiq, Abdur R. and Kennedy, Andrew R. (2017) A novel method for the manufacture of porous structures with multi-component, coated pores. Materials Letters, 196 . pp. 324-327. ISSN 1873-4979

Siebert, Michael, Rodrigues, Lucélia Taranto, Gillott, Mark C., Hines, Emma and Richards, David (2017) Driving sustainability in the UK housebuilding industry around the barriers to change. In: 16th International Conference on Sustainable Energy Technologies (SET2017), 17-20 Jul 2017, Bologna, Italy.

Sierra-Pallares, José, Huddle, Thomas, García-Serna, Juan, Alonso, Esther, Mato, Fidel, Shvets, Igor, Luebben, Olaf, Cocero, María José and Lester, Edward (2016) Understanding bottom-up continuous hydrothermal synthesis of nanoparticles using empirical measurement and computational simulation. Nano Research, 9 (11). pp. 3377-3387. ISSN 1998-0000

Silbernagel, Cassidy, Ashcroft, Ian, Dickens, Phill and Galea, Michael (2018) Electrical resistivity of additively manufactured AlSi10Mg for use in electric motors. Additive Manufacturing, 21 . pp. 395-403. ISSN 2214-8604

Siller-Algara, Gerardo, Severin, Nikolai, Chong, Samantha Y., Björkman, Torbjörn, Palgrave, Robert G., Laybourn, Andrea, Antonietti, Markus, Khimyak, Yaroslav Z., Krasheninnikov, Arkady V., Rabe, Jürgen P., Kaiser, Ute, Cooper, Andrew I., Thomas, Arne and Bojdys, Michael J. (2014) Triazine-based graphitic carbon nitride: a two-dimensional semiconductor. Angewandte Chemie International Edition, 53 (29). pp. 7540-7455. ISSN 1521-3773

Silva, A., Neves, Luís C., Gaspar, Pedro L. and de Brito, J. (2016) Probabilistic transition of condition: render facades. Building Research & Information, 44 (3). pp. 301-318. ISSN 0961-3218

Silva, Ana, Gaspar, Pedro L., de Brito, Jorge and Neves, Luís C. (2016) Probabilistic analysis of degradation of façade claddings using Markov chain models. Materials and Structures, 49 (7). pp. 2871-2892. ISSN 1359-5997

Simmons, Daniel, Cools, Kristof and Sewell, Phillip (2016) A hybrid Boundary Element Unstructured Transmission-line (BEUT) method for accurate 2D electromagnetic simulation. Journal of Computational Physics, 324 . pp. 275-288. ISSN 0021-9991

Simmons, Kathy and Johnson, Graham (2015) Velocity measurements in the vicinity of the exit and inlet of a spiral bevel gear shroud. In: ASME Turbo Expo 2015: Turbine Technical Conference and Exposition, 15-19 June 2015, Montreal, Canada.

Simonelli, Marco, Aboulkhair, Nesma T., Cohen, Philip, Murray, James W., Clare, Adam T., Tuck, Chris and Hague, Richard J.M. (2018) A comparison of Ti-6Al-4V in-situ alloying in Selective Laser Melting using simply-mixed and satellited powder blend feedstocks. Materials Characterization . ISSN 1044-5803

Simonelli, Marco, Tse, Yau Yau and Tuck, Christopher (2014) On the texture formation of selective laser melted Ti-6Al-4V. Metallurgical and Materials Transactions A, 45 (6). pp. 2863-2872. ISSN 1543-1940

Sinha, Rishie, Correia, Ricardo, Gardner, David, Grau-Roma, Llorenc, de Brot, Simone, Hardman, Jonathan, Morgan, Steve and Norris, Andrew (2018) Mucosal injury following short term tracheal intubation: a novel animal model and composite injury score. Laryngoscope Investigative Otolaryngology . ISSN 2378-8038

Sitnikova, Elena, Li, Shuguang, Li, Dafei and Yi, Xiaosu (2017) Subtle features of delamination in cross-ply laminates due to low speed impact. Composites Science and Technology, 149 . pp. 149-158. ISSN 0266-3538

Sivapalan, Subarna, Clifford, Michael J. and Speight, Sarah (2017) Engineering education for sustainable development: using online learning to support the new paradigms. Australasian Journal of Engineering Education . pp. 1-13. ISSN 2205-4952

Sivapuratharasu, M., Hibberd, Stephen, Hubbard, Matthew E. and Power, H. (2016) Inertial effects on thin-film wave structures with imposed surface shear on an inclined plane. Physica D: Nonlinear Phenomena, 325 . pp. 86-97. ISSN 0167-2789

Soejadi, Prijoko P., Lawson, Glyn, Ryan, Brendan and Hermawati, Setia (2018) Participatory ergonomics in Indonesian tin mining. Zeszyty Naukowe Politechniki Poznańskiej. Organizacja i Zarządzanie (75). pp. 259-268. ISSN 0239-9415

Soldatos, Dimitris, Triantafyllou, S.F. and Panoskaltsis, V.P. (2017) Thermomechanical couplings in shape memory alloy materials. Continuum Mechanics and Thermodynamics, 29 (3). pp. 805-834. ISSN 1432-0959

Soldatos, Dimitris and Triantafyllou, Savvas P. (2017) On the quasi-yield surface concept in plasticity theory. ZAMM, 97 (8). pp. 961-972. ISSN 1521-4001

Soldatos, Dimitris, Triantafyllou, Savvas P. and Chatzi, Eleni N. (2015) On the constitutive modeling of dual-phase steels at finite strains: a generalized plasticity based approach. In: Forming Technology Forum 2015, 29-30 June 2015, Zurich, Switzerland.

Solomon, Adane Kassa, Skuriat, Robert, Castellazzi, Alberto and Wheeler, Patrick (2016) Modular integration of a matrix converter. IEEJ Transactions on Electrical and Electronic Engineering, 11 (1). pp. 103-111. ISSN 1931-4973

Song, B., Bai, M., Voisey, K.T. and Hussain, Tanvir (2017) Role of oxides and porosity on high temperature oxidation of liquid fuelled HVOF thermal sprayed Ni50Cr coatings. Journal of Thermal Spray Technology . ISSN 1544-1016

Song, B., Hussain, T. and Voisey, K.T. (2016) Laser cladding of Ni50Cr: a parametric and dilution study. Physics Procedia, 83 . pp. 706-715. ISSN 1875-3884

Song, B., Hussain, Tanvir and Voisey, K.T. (2016) Laser cladding of Ni50Cr: a parametric and dilution study. Physics Procedia, 83 . pp. 706-715. ISSN 1875-3884

Song, B., Pala, Z., Voisey, K.T. and Hussain, Tanvir (2016) Gas and liquid-fuelled HVOF spraying of Ni50Cr coating: microstructure and high temperature oxidation. Surface and Coatings Technology . ISSN 1879-3347

Sousa, Hélder S., Branco, Jorge M., Lourenço, Paulo B. and Neves, Luís C. (2015) Inference on stiffness and strength of existing chestnut timber elements using Hierarchical Bayesian Probability Networks. Materials and Structures . pp. 1-16. ISSN 1871-6873

Sousa, Hélder S. and Neves, Luís C. (2018) Reliability-based design of interventions in deteriorated timber structures. International Journal of Architectural Heritage, 12 (4). pp. 507-515. ISSN 1558-3058

Southon, Nicholas, Stavroulakis, Petros, Goodridge, Ruth and Leach, Richard (2018) In-process measurement and monitoring of a polymer laser sintering powder bed with fringe projection. Materials & Design . ISSN 0264-1275 (In Press)

Sowter, Andrew, Athab, Ahmed, Novellino, Alessandro, Grebby, Stephen and Gee, David (2017) Supporting energy regulation by monitoring land motion on a regional and national scale: a case study of Scotland. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy . ISSN 0957-6509

Spackman, G.H., Brown, L.P. and Jones, I.A. (2018) Development of methods for optimisation of complex 3D weave geometries. In: 13th International Conferense on Textile Composited TexComp 13, 17-19 September 2018, Milan, Italy. (In Press)

Speidel, Alistair, Lutey, Adrian Hugh Alexander, Mitchell-Smith, Jonathon, Rance, Graham A., Liverani, Erica, Ascari, Alessandro, Fortunato, Alessandro and Clare, Adam T. (2016) Surface modification of mild steel using a combination of laser and electrochemical processes. Surface and Coatings Technology, 307 (A). pp. 849-860. ISSN 1879-3347

Sprinks, James, Wardlaw, Jessica, Houghton, Robert J., Bamford, Steven and Morley, Jeremy (2017) Task workflow design and its impact on performance and volunteers’ subjective preference in virtual citizen science. International Journal of Human-Computer Studies . ISSN 1071-5819

Sreeja, V., Aquino, M., de Jong, Kees and Visser, Hans (2014) Effect of the 24 September 2011 solar radio burst on precise point positioning service. Space Weather, 12 (3). pp. 143-147. ISSN 1542-7390

Sreeja, V. and Aquino, Marcio (2014) Statistics of ionospheric scintillation occurrence over European high latitudes. Journal of Atmospheric and Solar-Terrestrial Physics, 120 . pp. 96-101. ISSN 1364-6826

Sreeja, V., Haralambous, H. and Aquino, M. (2017) Observations of quiet-time moderate midlatitude L-band scintillation in association with plasma bubbles. GPS Solutions . pp. 1-12. ISSN 1521-1886

Stavroulakis, Petros, Sims-Waterhouse, Danny, Piano, Samanta and Leach, Richard K. (2017) Flexible decoupled camera and projector fringe projection system using inertial sensors. Optical Engineering, 56 (10). 104106-1-104106-5. ISSN 1560-2303

Stephenson, Scott, Meng, Xiaolin, Moore, Terry, Baxendale, Anthony and Edwards, Tim (2014) A fairy tale approach to cooperative vehicle positioning. In: 2014 International Technical Meeting of The Institute of Navigation, 27-29 Jan 2014, San Diego, California.

Stiles, Shelley, Ryan, Brendan and Golightly, David (2018) Evaluating attitudes to safety leadership within rail construction projects. Safety Science . ISSN 0925-7535

Stirling, Robert J., Snape, Colin E. and Meredith, Will (2018) The impact of hydrothermal carbonisation on the char reactivity of biomass. Fuel Processing Technology, 177 . pp. 152-158. ISSN 0378-3820

Stuart, Bryan W., Gimeno-Fabra, Miquel, Segal, Joel, Ahmed, Ifty and Grant, David M. (2017) Mechanical, structural and dissolution properties of heat treated thin-film phosphate based glasses. Applied Surface Science, 416 . pp. 605-617. ISSN 0169-4332

Stuart, Bryan W., Grant, Colin A., Stan, George E., Popa, Adrian C., Titman, Jeremy J. and Grant, David M. (2018) Gallium incorporation into phosphate based glasses: bulk and thin film properties. Journal of the Mechanical Behavior of Biomedical Materials, 82 . pp. 371-382. ISSN 1751-6161

Su, Rong, Coupland, Jeremy and Leach, Richard K. (2017) Calibration of coherence scanning interferometry and the effects of defocus. In: Focus on Microscopy 2017, 9-12 April, 2017, Bordeaux, France.

Su, Rong, Ekberg, Peter and Leach, Richard K. (2017) High-precision lateral distortion correction in coherence scanning interferometry using an arbitrary surface. In: 2017 ASPE Topical Meeting: Precision Engineering and Optics: What are the limits of precision, and how to characterize them?, 24-25 April 2017, Tuscon, Arizona, USA.

Su, Rong, Thomas, Matthew, Leach, Richard and Coupland, Jeremy (2017) Effects of defocus on the transfer function of coherence scanning interferometry. Optics Letters, 43 (1). pp. 82-85. ISSN 1539-4794

Su, Rong, Wang, Yuhang, Coupland, Jeremy and Leach, Richard K. (2017) On tilt and curvature dependent errors and the calibration of coherence scanning interferometry. Optics Express, 25 (4). pp. 3297-3310. ISSN 1094-4087

Su, Weiguang, Darkwa, Jo and Kokogiannakis, Georgios (2017) Review of solid–liquid phase change materials and their encapsulation technologies. Renewable and Sustainable Energy Reviews, 48 . pp. 373-391. ISSN 1364-0321

Su, Weiguang, Darkwa, Jo and Kokogiannakis, Georgios (2017) Development of microencapsulated phase change material for solar thermal energy storage. Applied Thermal Engineering, 112 . pp. 1205-1212. ISSN 1873-5606

Subhy, Ayad (2017) Advanced analytical techniques in fatigue and rutting related characterisations of modified bitumen: literature review. Construction and Building Materials, 156 . pp. 28-45. ISSN 0950-0618

Subhy, Ayad and Lo Presti, Davide (2017) Fatigue and healing properties of low environmental impact rubberized bitumen for asphalt pavement. Coatings, 7 (5). p. 66. ISSN 2079-6412

Subhy, Ayad, Lo Presti, Davide and Airey, Gordon (2017) New simplified approach for obtaining a reliable plateau value in fatigue analysis of bituminous materials. Engineering Failure Analysis, 79 . pp. 263-273. ISSN 1350-6307

Subhy, Ayad, Lo Presti, Davide and Airey, Gordon (2017) Evaluation of the fracture performance of different rubberised bitumens based on the essential work of fracture. Engineering Fracture Mechanics, 179 . pp. 203-212. ISSN 0013-7944

Subhy, Ayad, Lo Presti, Davide and Airey, Gordon (2016) Rubberised bitumen manufacturing assisted by rheological measurements. Road Materials and Pavement Design, 17 (2). pp. 290-310. ISSN 1468-0629

Subhy, Ayad, Pires, Gustavo Menegusso, Lo Presti, Davide and Airey, Gordon (2018) The effects of laboratory ageing on rheological and fracture characteristics of different rubberised bitumens. Construction and Building Materials, 180 . pp. 188-198. ISSN 0950-0618

Sui, Sheng, Wang, Xiaoying, Zhou, Xintong, Su, Yuehong, Riffat, Saffa and Liu, Chang-jun (2017) A comprehensive review of Pt electrocatalysts for the oxygen reduction reaction: nanostructure, activity, mechanism and carbon support in PEM fuel cells. Journal of Materials Chemistry A, 5 (5). pp. 1808-1825. ISSN 2050-7496

Sujecki, S., Sójka, L., Bereś-Pawlik, E., Piramidowicz, R., Sakr, H., Tang, Zhuoqi, Barney, Emma R., Furniss, David, Benson, Trevor M. and Seddon, Angela B. (2017) Modelling of multimode selenide-chalcogenide glass fibre based MIR spontaneous emission sources. In: 19th International Conference on Transparent Optical Networks (ICTON), 2-6 July 2017, Girona, Spain.

Sujecki, S., Sójka, L., Bereś-Pawlik, E., Sakr, H., Tang, Z., Barney, Emma R., Furniss, David, Benson, Trevor M. and Seddon, Angela B. (2017) Numerical modelling of Tb3+ doped selenide-chalcogenide multimode fibre based spontaneous emission sources. Optical and Quantum Electronics, 49 (12). 416/1-416/7. ISSN 1572-817X

Sujecki, Slawomir, Sojka, Lukasz, Pawlik, Elzbieta, Anders, Krzysztof, Piramidowicz, Ryszard, Tang, Zhuoqi, Furniss, David, Barney, Emma, Benson, Trevor and Seddon, Angela (2018) Numerical analysis of spontaneous mid-infrared light emission from terbium ion doped multimode chalcogenide fibers. Journal of Luminescence, 199 . pp. 112-115. ISSN 0022-2313

Sumner, Aaran, Gerada, Chris, Brown, Neil and Clare, Adam (2017) Controlling DC permeability in cast steels. Journal of Magnetism and Magnetic Materials, 429 . pp. 79-85. ISSN 0304-8853

Sumner, M., Abusorrah, Abdullah, Thomas, David W.P. and Zanchetta, Pericle (2014) Real time parameter estimation for power quality control and intelligent protection of grid-connected power electronic converters. IEEE Transactions on Smart Grid, 5 (4). pp. 1602-1607. ISSN 1949-3061

Sun, Shen, Hayes-Gill, Barrie R., He, Diwei, Zhu, Yiqun, Huynh, Nam T. and Morgan, Stephen P. (2016) Comparison of laser Doppler and laser speckle contrast imaging using a concurrent processing system. Optics and Lasers in Engineering, 83 . pp. 1-9. ISSN 0143-8166

Susi, Melania, Andreotti, Marcus and Aquino, Marcio (2014) Kalman filter based PLL robust against ionospheric scintillation. In: Mitigation of ionospheric threats to GNSS: an appraisal of the scientific and technological outputs of the TRANSMIT Project. InTech, pp. 23-36. ISBN 978-953-51-1642-4

Susi, Melania, Andreotti, Marcus, Aquino, Marcio and Dodson, Alan (2016) Tuning a Kalman filter carrier tracking algorithm in the presence of ionospheric scintillation. GPS Solutions, 21 (3). pp. 1149-1160. ISSN 1521-1886

Swift, Benjamin, Bennett, Malcolm, Waller, Katie, Dodd, Christine E.R., Murray, Annie, Gomes, Rachel L., Humphreys, Bethan, Hobman, Jon L., Jones, Michael A., Whitlock, Sophie, Mitchell, Lucy J., Lennon, Rosie J. and Arnold, Kathryn E. (2019) Anthropogenic environmental drivers of antimicrobial resistance in wildlife. Science of the Total Environment, 649 . pp. 12-20. ISSN 1879-1026

Swift, Benjamin M.C., Bennett, Malcolm, Waller, Katie, Dodd, Christine, Murray, Annie, Gomes, Rachel L., Humphreys, Bethan, Hobman, Jon L., Jones, Michael A., Whitlock, Sophia E., Mitchell, Lucy J., Lennon, Rosie J. and Arnold, Kathryn E. (2019) Anthropogenic environmental drivers of antimicrobial resistance in wildlife. Science of the Total Environment, 649 . pp. 12-20. ISSN 1879-1026

Syam, Wahyudin P., Jianwei, Wu, Zhao, Bo, Maskery, Ian, Elmadih, Waiel and Leach, Richard (2017) Design and analysis of strut-based lattice structures for vibration isolation. Precision Engineering . ISSN 0141-6359 (In Press)

Syam, Wahyudin P., Jianwei, Wu, Zhao, Bo, Maskery, Ian and Leach, Richard K. (2017) Design of mechanically-optimised lattice structures for vibration isolation. In: euspen's 17th International Conference & Exhibition, 29 May - 2 June 2017, Hannover, Germany.

Syam, Wahyudin P., Leach, Richard K., Rybalcenko, Konstantin, Gaio, Andrȇ and Crabtree, Joseph (2018) In-process measurement of the surface quality for a novel finishing process for polymer additive manufacturing. Procedia CIRP, 75 . pp. 108-113. ISSN 2212-8271

Sánchez, Diana B., Grenfell, James, Airey, Gordon and Caro, Silvia (2017) Evaluation of the degradation of fine asphalt-aggregate mixtures containing high reclaimed asphalt pavement contents. Road Materials and Pavement Design, 18 (sup2). pp. 91-107. ISSN 1468-0629

Sánchez-Valencia, Andrea, Smerdova, Olga, Hutchings, Lian R. and De Focatiis, Davide S.A. (2017) The roles of blending and of molecular weight distribution on craze initiation. Macromolecules, 50 (23). pp. 9507-9514. ISSN 1520-5835

Sójka, L., Furniss, David, Tang, Zhuoqi, Sakr, H., Barney, Emma R., Benson, Trevor M., Seddon, Angela B., Sujecki, S., Scholle, K., Lamrini, S. and Fuhrberg, P. (2016) Numerical modeling of lathanide-ion doped fibre lasers operating within mid-infrared wavelength region. In: 18th International Conference on Transparent Optical Networks, 10-14 July 2016, Trento, Italy.

Sójka, L., Tang, Z., Furniss, David, Sakr, H., Bereś-Pawlik, E., Seddon, Angela B., Benson, Trevor M. and Sujecki, S. (2016) Numerical investigation of mid-infrared laser action in Pr3+ doped chalcogenide fibre laser. In: 24th International Workshop on Optical Wave & Waveguide Theory and Numerical Modelling (OWTNM 2016), 20-21 May 2016, Warsaw, Poland.

Sójka, Lukasz, Pajewski, Lukasz, Popenda, Maciej, Beres-Pawlik, Elzbieta, Lamrini, Samir, Markowski, Konrad, Osuch, Tomasz, Benson, Trevor M., Seddon, Angela B. and Sujecki, Slawomir (2018) Experimental investigation of mid-infrared laser action from DY3+ doped fluorozirconate fiber. IEEE Photonics Technology Letters . ISSN 1041-1135

Talha, Ahmad, Vakil, Gaurang, Cox, Tom and Gerada, C. (2018) Design of a 43kW switched reluctance machine for a high performance hybrid electric vehicle. In: PEMD 2018 - 9th International Conference on Power Electronics, Machines and Drives, 17-19 April 2018, Liverpool, UK.

Tan, Chao, Ahmed, Ifty, Parsons, Andrew J., Sharmin, Nusrat, Zhu, Chenkai, Liu, Jinsong, Rudd, Chris D. and Liu, Xiaoling (2017) Structural, thermal and dissolution properties of MgO- and CaO-containing borophosphate glasses: effect of Fe2O3 addition. Journal of Materials Science, 52 (12). pp. 7489-7502. ISSN 1573-4803

Tan, Chao, Ahmed, Ifty, Parsons, Andrew J., Zhu, Chenkai and Betanzos, Fernando B. (2018) Effects of Fe2O3 addition and annealing on the mechanical and dissolution properties of MgO- and CaO-containing phosphate glass fibres for bio-applications. Biomedical Glasses, 4 (1). pp. 57-71. ISSN 2299-3932

Tan, Chao, Rudd, Chris, Parsons, Andrew, Sharmin, Nusrat, Zhang, Junxiao, Chen, Wanru and Ahmed, Ifty (2018) Chitosan as a coupling agent for phosphate glass fibre/polycaprolactone composites. Fibers, 6 (4). 97/1-97/25. ISSN 2079-6439

Tang, M., Gaeta, Alberto, Formentini, Andrea, Ohyama, K., Zanchetta, Pericle and Asher, Greg (2016) Enhanced DBCC for high-speed permanent magnet synchronous motor drives. IET Power Electronics, 9 (15). pp. 2880-2890. ISSN 1755-4543

Tang, Zhuoqi, Furniss, David, Fay, Michael, Neate, Nigel C., Cheng, Yin, Barney, Emma, Sojka, Lukasz, Sujecki, S., Benson, Trevor M. and Seddon, Angela B. (2014) First identification of rare-earth oxide nucleation in chalcogenide glasses and implications for fabrication of mid-infrared active fibers. Journal of the American Ceramic Society, 97 (2). pp. 432-441. ISSN 0002-7820

Thierry, V., Brown, L. and Chronopoulos, D. (2018) Multi-scale wave propagation modelling for two-dimensional periodic textile composites. Composites Part B: Engineering, 150 . pp. 144-156. ISSN 1359-8368

Thomas, M., Leach, R.K., Nikolaev, N., Widjanarko, T., Senin, N., Aryan, H. and Coupland, J.M. (2018) Verification of a rigorous 2D model of rough surface scattering. In: European Optical Society Biennial Meeting (EOSAM) 2018, 8-12 October 2018, Delft, Netherlands.

Thomas-Hillman, Ieuan, Laybourn, Andrea, Dodds, Chris and Kingman, Samuel W. (2018) Realising the environmental benefits of metal–organic frameworks: recent advances in microwave synthesis. Journal of Materials Chemistry A . ISSN 2050-7496

Thompson, Adam, Körner, Lars, Senin, Nicola, Lawes, Simon, Maskery, Ian and Leach, Richard K. (2017) Measurement of internal surfaces of additively manufactured parts by X-ray computed tomography. In: 7th Conference on Industrial Computed Tomography (iCT 2017), 7-9 Feb 2017, Leuven, Belgium.

Thompson, Adam, Maskery, Ian and Leach, Richard (2018) Internal surface measurement by X-ray computed tomography: an additive manufacturing industrial case study. In: 3rd Dimensional X-ray Computed Tomography Conference (dXCT), 2-3 July 2018, Nottingham, UK.

Thompson, Adam, Maskery, Ian and Leach, Richard K. (2016) X-ray computed tomography for additive manufacturing: a review. Measurement Science and Technology, 27 (7). 072001/1-072001/17. ISSN 1361-6501

Thompson, Adam, Senin, Nicola, Giusca, Claudiu L. and Leach, Richard K. (2017) Topography of selectively laser melted surfaces: A comparison of different measurement methods. CIRP Annals - Manufacturing Technology, 66 (1). pp. 543-546. ISSN 0007-8506

Thompson, Adam, Senin, Nicola and Leach, Richard K. (2016) Towards an additive surface atlas. In: ASPE/euspen Conference: Dimensional Accuracy and Surface Finish in Additive Manufacturing, 27-30 Jun 2016, Raleigh, N.C., USA.

Thompson, Adam, Senin, Nicola, Maskery, Ian, Körner, Lars, Lawes, Simon and Leach, Richard (2018) Internal surface measurement of metal powder bed fusion parts. Additive Manufacturing, 20 . pp. 126-133. ISSN 2214-8604

Thompson, Adam, Senin, Nicola, Maskery, Ian and Leach, Richard (2018) Effects of magnification and sampling resolution in X-ray computed tomography for the measurement of additively manufactured metal surfaces. Precision Engineering, 53 . pp. 54-64. ISSN 0141-6359

Thompson, Adam, Tammas-Williams, Sam, Senin, Nicola, Todd, Iain and Leach, Richard (2018) Correlating volume and surface features in additively manufactured metal parts. In: 2018 ASPE and euspen Summer Topical Meeting Advancing Precision in Additive Manufacturing, 22-25 July 2018, Berkeley, California, USA.

Thomson, Ross, Martin, Jennifer L. and Sharples, Sarah (2013) The psychosocial impact of home use medical devices on the lives of older people: a qualitative study. BMC Health Services Research, 13 (467). 467/1-467/8. ISSN 1472-6963

Thummavichai, Kunyapat, Wang, Nannan, Xu, Fang, Rance, Graham, Xia, Yongde and Zhu, Yanqiu (2018) In situ investigations of the phase change behaviour of tungsten oxide nanostructures. Royal Society Open Science, 5 . p. 171932. ISSN 2054-5703

Tian, Meng, Yu, Xu, Su, Yuehong, Zheng, Hongfei and Riffat, Saffa (2018) A study on incorporation of transpired solar collector in a novel multifunctional PV/Thermal/Daylighting (PV/T/D) panel. Solar Energy, 165 . pp. 90-99. ISSN 0038-092X

Todhunter, Luke D., Leach, Richard and Lawes, Simon (2017) Results of an industrial survey on the use of surface texture parameters. In: Met & Props 2017: the 16th International Conference on Metrology and Properties of Engineering Surfaces, 26-29 June 2017, Gothenburg, Sweden.

Todhunter, Luke D., Leach, Richard, Lawes, Simon and Blateyron, François (2017) An analysis of Type F2 software measurement standards for profile surface texture parameters [Abstract]. In: Advanced Mathematical and Computational Tools in Metrology and Testing XI, 29-31 August 2017, Glasgow, UK.

Todhunter, Luke D., Leach, Richard, Lawes, Simon, Harris, Peter and Blateyron, François (2017) Development of mathematically-defined surfaces. In: Postgraduate Institute Conference 2017, 30-31 October 2017, Teddington, UK.

Todhunter, Luke D., Leach, Richard K., Lawes, Simon and Blateyron, François (2017) An analysis of type F2 software measurement standards for profile surface texture parameters. Measurement Science and Technology, 28 (6). 065017/1-065017/21. ISSN 1361-6501

Todhunter, Luke D., Senin, Nicola, Leach, Richard, Lawes, Simon, Blateyron, François and Harris, Peter (2018) A programmable software framework for the generation of simulated surface topography. In: euspen 18th International Conference & Exhibition, 4-8 June 2018, Venice, Italy.

Tomczynska, Magdalena M., Choong, Gabriel Y.H., De Focatiis, Davide S.A., Grant, David M. and Parsons, Andrew J. (2016) Compounding and rheometry of PLA nanocomposites with coated and uncoated hydroxyapatite nanoplatelets. In: The Polymer Processing Society Conference 2015, 21-25 September 2015, Graz, Austria.

Tosello, G., Haitjema, H., Leach, Richard K., Quagliotti, D., Gasparin, S. and Hansen, H.N. (2016) An international comparison of surface texture parameters quantification on polymer artefacts using optical instruments. CIRP Annals - Manufacturing Technology, 65 (1). pp. 529-532. ISSN 0007-8506

Towey, James J. and Barney, Emma R. (2016) Multicomposition EPSR: toward transferable potentials to model chalcogenide glass structures. Journal of Physical Chemistry B . ISSN 1520-5207

Townsend, Andrew, Racasan, Radu, Bills, Paul, Thompson, Adam, Senin, Nicola, Leach, Richard K. and Blunt, Liam (2017) Results from an interlaboratory comparison of areal surface texture parameter extraction from X-ray computed tomography of additively manufactured parts. In: euspen's 17th International Conference & Exhibition, 29 May - 2 June 2017, Hannover, Germany.

Tran, Trung Hieu, Mao, Yong, Nathanail, Paul, Siebers, Peer-Olaf and Robinson, Darren (2018) Integrating slacks-based measure of efficiency and super-efficiency in data envelopment analysis. Omega . ISSN 0305-0483

Trudel, Chantal, Cobb, Sue, Momtahan, Kathryn, Brintnell, Janet and Mitchell, Ann (2017) Human factors considerations in designing for infection prevention and control in neonatal care – findings from a pre-design inquiry. Ergonomics . pp. 1-16. ISSN 1366-5847

Trupia, Laura, Parry, Tony, Neves, Luís C. and Lo Presti, Davide (2017) Rolling resistance contribution to a road pavement life cycle carbon footprint analysis. International Journal of Life Cycle Assessment, 22 (6). pp. 972-985. ISSN 1614-7502

Tsinidis, Grigorios, Heron, Charles, Madabhushi, Gopol and Pitilakis, Kyriazis (2016) Calibration of strain gauged square tunnels for centrifuge testing. Geotechnical and Geological Engineering, 34 (3). pp. 911-921. ISSN 1573-1529

Tsinidis, Grigorios, Pitilakis, Kyriazis, Madabhushi, Gopol and Heron, Charles (2015) Dynamic response of flexible square tunnels: centrifuge testing and validation of existing design methodologies. Geotechnique, 65 (5). pp. 401-417. ISSN 1751-7656

Turnbull, Barbara, Swift, Michael and Hill, Richard (2016) Ice as a granular material. In: 24th International Congress of Theoretical and Applied Mechanics, 21-25 Aug 2016, Montreal, Canada.

Turner, Paul, Liu, Tao, Zeng, Xuesen and Brown, Kevin (2018) Three-dimensional woven carbon fibre polymer composite beams and plates under ballistic impact. Composite Structures, 185 . pp. 483-495. ISSN 1879-1085

Turner, Stuart M.R., Bridges, John C., Grebby, Stephen and Ehlmann, Bethany L. (2016) Hydrothermal activity recorded in post Noachian-aged impact craters on Mars. Journal of Geophysical Research: Planets, 121 (4). pp. 608-625. ISSN 2196-9100

Twaha, Ssennoga, Zhu, Jie, Maraaba, Luqman, Huang, Kuo, Li, Bo and Yan, Yuying (2017) Maximum power Point Tracking control of thermoelectric generation system using extremum seeking control method. Energies, 10 . pp. 1-18. ISSN 1996-1073

Uguna, Clement N., Carr, Andrew D., Snape, Colin E. and Meredith, Will (2016) Retardation of oil cracking to gas and pressure induced combination reactions to account for viscous oil in deep petroleum basins: evidence from oil and n-hexadecane pyrolysis at water pressures up to 900bar. Organic Geochemistry, 97 . pp. 61-73. ISSN 0146-6380

Uguna, Clement N., Carr, Andrew D., Snape, Colin E. and Meredith, Will (2015) High pressure water pyrolysis of coal to evaluate the role of pressure on hydrocarbon generation and source rock maturation at high maturities under geological conditions. Organic Geochemistry, 78 . pp. 44-51. ISSN 0146-6380

Uguna, Clement N., Carr, Andrew D., Snape, Colin E., Meredith, Will, Scotchman, Iain C., Murray, Andrew and Vane, Christopher H. (2016) Impact of high water pressure on oil generation and maturation in Kimmeridge Clay and Monterey source rocks: implications for petroleum retention and gas generation in shale gas systems. Marine and Petroleum Geology, 73 . pp. 72-85. ISSN 1873-4073

Urrutia, Aitor, Bojan, Kartheka, Marques, Leonel, Mullaney, Kevin, Goicoechea, Javier, James, Stephen, Clark, Matt, Korposh, Sergiy and Tatam, Ralph (2016) Novel highly sensitive protein sensors based on tapered optical fibres modified with Au-based nanocoatings. Journal of Sensors, 2016 . p. 8129387. ISSN 1687-7268

Vafaei, Saeid, Tuck, Christopher, Ashcroft, Ian and Wildman, Ricky D. (2016) Surface microstructuring to modify wettability for 3D printing of nano-filled inks. Chemical Engineering Research and Design, 109 . pp. 414-420. ISSN 0263-8762

Vafamehr, Hassan, Cairns, Alasdair and Ebne-Abbasi, Hazhir (2018) A study of transient over-fuelling during heavy knock in an optical spark ignition engine. International Journal of Powertrains, 7 (1/2/3). pp. 180-198. ISSN 1742-4275

Vagnoli, M., Remenyte-Prescott, R. and Andrews, J. (2017) Railway bridge fault detection using Bayesian belief network. In: Stephenson Conference: Research for Railways, 25th - 27th April 2017, London, United Kingdom.

Vagnoli, Matteo, Di Maio, Francesco and Zio, Enrico (2017) Ensembles of climate change models for risk assessment of nuclear power plants. Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability . ISSN 1748-006X

Vagnoli, Matteo, Remenyte-Prescott, Rasa and Andrews, John (2018) Railway bridge structural health monitoring and fault detection: state-of-the-art methods and future challenges. Structural Health Monitoring, 17 (4). pp. 971-1007. ISSN 1741-3168

Vagnoli, Matteo, Remenyte-Prescott, Rasa and Andrews, John (2017) Towards a real-time Structural Health Monitoring of railway bridges. In: 52nd ESReDA Seminar on Critical Infrastructures Enhancing Preparedness & Resilience for the security of citizens and services supply continuity., 30-31 May 2017, Kaunas, Lithuania.

Vagnoli, Matteo, Remenyte-Prescott, Rasa and Andrews, John (2017) A fuzzy-based Bayesian Belief Network approach for railway bridge condition monitoring and fault detection. In: Safety and Reliability – Theory and Application: ESREL 2017. CRC Press. ISBN 9781138629370

Vagnoli, Matteo, Remenyte-Prescott, Rasa, Thompson, Daniel, Andrews, John, Clarke, Paul and Atkinson, Neil (2017) A data mining tool for detecting and predicting abnormal behaviour of railway tunnels. In: 11th International Workshop on Structural Health Monitoring (IWSHM 2017), 12-14 Sept 2017, Stanford, California, USA.

Vaithilingam, Jayasheelan, Prina, Elisabetta, Goodridge, Ruth D., Hague, Richard J.M., Edmondson, Steve, Rose, Felicity R.A.J. and Christie, Steven D.R. (2016) Surface chemistry of Ti6Al4V components fabricated using selective laser melting for biomedical applications. Materials Science and Engineering: C, 67 . pp. 294-303. ISSN 0928-4931

Vaithilingam, Jayasheelan, Saleh, Ehab, Wildman, Ricky D., Hague, Richard J.M. and Tuck, Christopher (2018) Optimisation of substrate angles for multi-material and multi-functional inkjet printing. Scientific Reports, 8 . 9030/1-9030/8. ISSN 2045-2322

Vaithilingam, Jayasheelan, Simonelli, Marco, Saleh, Ehab, Senin, Nicola, Wildman, Ricky D., Hague, Richard J. M., Leach, Richard K. and Tuck, Christopher J. (2017) Combined inkjet printing and infrared sintering of silver nanoparticles using a swathe-by-swathe and layer-by-layer approach for 3-dimensional structures. ACS Applied Materials & Interfaces . ISSN 1944-8244

Vasilyev, A., Andrews, John D., Jackson, L.M. and Dunnett, S. (2017) Reliability modelling of PEM fuel cells with hybrid Petri nets. In: Safety and Reliability – Theory and Application: ESREL 2017. CRC Press. ISBN 9781138629370

Vaughan, Dan R.W., Bakker, Otto Jan, Branson, David T. and Ratchev, Svetan (2016) Variation aware assembly systems for aircraft wings. In: SAE 2016 Aerospace Manufacturing and Automated Fastening (AMAF) Conference & Exhibition, 4-6 Oct 2016, Bremen, Germany.

Vi Le, Thi Ho, Gillott, Mark C. and Rodrigues, Lucélia Taranto (2016) The case for hybrid ventilated primary schools in Ho Chi Minh City in Vietnam. In: 36th International Conference on Passive and Low Energy Architecture. Cities, Buildings, People: Towards Regenerative Environments (PLEA 2016), 11-13 July 2016, Los Angeles, USA.

Vileiniskis, Marius and Remenyte-Prescott, Rasa (2017) Quantitative risk prognostics framework based on Petri Net and Bow-Tie models. Reliability Engineering and System Safety, 165 . pp. 62-73. ISSN 0951-8320

Vileiniskis, Marius and Remenyte-Prescott, Rasa (2016) Extended Bow-Tie model for asset risk and reliability modeling: application to a passenger lift. In: ESREL 2016, 25-29 Sept 2016, Glasgow, UK.

Vileiniskis, Marius, Remenyte-Prescott, Rasa and Rama, Dovile (2016) A fault detection method for railway point systems. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 230 (3). pp. 852-865. ISSN 2041-3017

Vileiniskis, Marius, Remenyte-Prescott, Rasa, Rama, Dovile and Andrews, John (2016) Fault detection and diagnostics of a three-phase separator. Journal of Loss Prevention in the Process Industries, 41 . pp. 215-230. ISSN 0950-4230

Vileiniskis, Marius, Remenyte-Prescott, Rasa, Rama, Dovile and Andrews, John D. (2016) Bayesian belief networks for fault detection and diagnostics of a three-phase separator. In: ESREL 2016, 25-29 Sept 2016, Glasgow, UK. (In Press)

Vivacqua, V., Mhatre, S., Ghadiri, M., Abdullah, A.M., Hassanpour, A., Al-Marri, M.J., Azzopardi, Barry J., Hewakandamby, Buddhika N. and Kermani, B. (2015) Electrocoalescence of water drop trains in oil under constant and pulsatile electric fields. Chemical Engineering Research and Design, 104 . pp. 658-668. ISSN 0263-8762

Voisey, K.T., Folkes, J., Srithorn, J. and Hughes, D.J. (2014) Neutron strain scanning of fibre and diode laser welds in stainless steel and Ti6Al4V. Physics Procedia, 56 . pp. 1277-1285. ISSN 1875-3892

Voisey, K.T., Liu, Z. and Stott, F.H. (2006) Inhibition of metal dusting using thermal spray coatings and laser treatment. Surface and Coatings Technology, 201 (3-4). pp. 637-648. ISSN 0257-8972

Voisey, K.T., Liu, Z. and Stott, F.H. (2006) Inhibition of metal dusting of alloy 800H by laser surface melting. Applied Surface Science, 252 (10). pp. 3658-3666. ISSN 0169-4332

Voisey, K.T., Scotchford, C.A., Martin, L. and Gill, H.S. (2014) Effect of Q-switched laser surface texturing of titanium on osteoblast cell response. Physics Procedia, 56 . pp. 1126-1135. ISSN 1875-3892

Wadge, Matthew D., Stuart, Bryan W., Thomas, Kathryn G. and Grant, David M. (2018) Generation and characterisation of gallium titanate surfaces through hydrothermal ion-exchange processes. Materials & Design, 155 . pp. 264-277. ISSN 0264-1275

Waldron, Julie A., Lawson, Glyn, Robinson, Darren and Cobb, Sue (2017) Variability of human behaviour in outdoor public spaces, associated with the thermal environment. In: 33rd International Conference on Passive and Low Energy Architecture, 3 - 5 July 2017, Edinburgh, United Kingdom.

Wales, Dominic J., Cao, Qun, Kastner, Katharina, Karjalainen, Erno, Newton, Graham N. and Sans, Victor (2018) 3D printable photochromic molecular materials for reversible information storage. Advanced Materials, 30 (26). 1800159/1-1800159/7. ISSN 1521-4095

Walker, J.C., Kamps, T.J., Lam, J.W., Mitchell-Smith, Jonathon and Clare, Adam T. (2017) Tribological behaviour of an electrochemical jet machined textured Al-Si automotive cylinder liner material. Wear . ISSN 1873-2577 (In Press)

Walsh, D.A., Li, Lisa E., Bakare, M.S. and Voisey, K.T. (2009) Visualisation of the local electrochemical activity of thermally-sprayed anti-corrosion coatings using scanning electrochemical microscopy. Electrochimica Acta, 54 (20). pp. 4647-4654. ISSN 0013-4686

Wan Mohtar, Wan Hanna Melini and Munro, Richard J. (2013) Threshold criteria for incipient sediment motion on an inclined bedform in the presence of oscillating-grid turbulence. Physics of Fluids, 25 (1). ISSN 1070-6631

Wanatowski, D. and Chu, J. (2012) Factors affecting pre-failure instability of sand under plane-strain conditions. Géotechnique, 62 (2). pp. 121-135. ISSN 0016-8505

Wanatowski, D. and Chu, J. (2010) Unstable behaviour of model Jamuna micaceous sand. V.N. Georgiannou (2008). Géotechnique 58, no. 10, 825–829. Geotechnique, 60 (4). pp. 307-308. ISSN 1751-7656

Wanatowski, Dariusz and Chu, Jian (2008) Effect of specimen preparation method on the stress-strain behavior of sand in plane-strain compression tests. Geotechnical Testing Journal, 31 (4). pp. 308-320. ISSN 0149-6115

Wang, Jian, Pagani, Luca, Leach, Richard K., Zeng, Wenhan, Colosimo, Bianca M. and Zhou, Liping (2015) Study of weighted fusion methods for the measurement of surface geometry. Precision Engineering, 47 . pp. 111-121. ISSN 0141-6359

Wang, Jie, Liu, Junpeng, Neate, Nigel C., Bai, Mingwen, Xu, Fang, Hussain, Tanvir, Scotchford, Colin and Hou, Xianghui (2018) Investigation on time-dependent wetting behavior of Ni-Cu-P ternary coating. Journal of Alloys and Compounds, 765 . pp. 221-228. ISSN 1873-4669

Wang, Nannan, Yang, Zhuxian, Xu, Fang, Thummavichai, Kunyapat, Chen, Hongmei, Xia, Yongde and Zhu, Yanqiu (2017) A generic method to synthesise graphitic carbon coated nanoparticles in large scale and their derivative polymer nanocomposites. Scientific Reports, 7 (1). 11829/1-11829/9. ISSN 2045-2322

Wang, Peipei, Li, Hejun, Ren, Xuanru, Yuan, Ruimei, Hou, Xianghui and Zhang, Yulei (2017) HfB2-SiC-MoSi2 oxidation resistance coating fabricated through in-situ synthesis for SiC coated C/C composites. Journal of Alloys and Compounds, 722 . pp. 69-76. ISSN 1873-4669

Wang, Q., Jiang, B., Xue, Q.F., Sun, H.L., Li, B., Zou, H.M. and Yan, Y.Y. (2015) Experimental investigation on EV battery cooling and heating by heat pipes. Applied Thermal Engineering, 88 . pp. 54-60. ISSN 1873-5606

Wang, Qian, Jiang, Bin, Li, Bo and Yan, Yuying (2016) A critical review of thermal management models and solutions of lithium-ion batteries for the development of pure electric vehicles. Renewable and Sustainable Energy Reviews, 64 . pp. 106-128. ISSN 1364-0321

Wang, Qingfeng, Sun, Xu, Cobb, Sue, Lawson, Glyn and Sharples, Sarah (2016) 3D printing system: an innovation for small-scale manufacturing in home settings? – early adopters of 3D printing systems in China. International Journal of Production Research . pp. 1-16. ISSN 1366-588X

Wang, Xiaojia, Jin, Baosheng, Zhu, Xiaoming and Liu, Hao (2016) Experimental evaluation of a novel 20kWth in situ gasification chemical looping combustion unit with an iron ore as the oxygen carrier. Industrial and Engineering Chemisty Research, 55 (45). pp. 11775-11784. ISSN 0888-5885

Wang, Xiaojia, Liu, Hao, Jin, Baosheng, Zhao, Jie, Sun, Chenggong and Snape, Colin E. (2016) Experimental evaluation of a Chinese sulfur-containing lean iron ore as the oxygen carrier for chemical-looping combustion. Industrial & Engineering Chemistry Research, 55 (2). pp. 428-435. ISSN 0888-5885

Wang, Xiaolong and Maroto-Valer, Mercedes Dissolution kinetics of minerals for advanced mineral carbonation. In: 7th European Conference on Coal Research & its Application, 3-5 Sept 2008, Cardiff, UK. (Unpublished)

Wang, Xiaolong and Maroto-Valer, Mercedes Ex-situ mineral carbonation with regenerative ammonium salts. In: 8th Annual Conference on Carbon Capture and Sequestration, 4-7 May 2009, Pittsburgh, U.S,. (Unpublished)

Wang, Y., Simmons, K., Eastwick, Carol and Hibberd, S. (2006) Study of aero-engine oil-air separators. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 220 (7). pp. 707-717. ISSN 0957-6509

Wang, Yun, Li, Jianfeng, Agyakwa, Pearl, Johnson, Christopher Mark and Li, Shuguang (2014) Quantitative microstructure characterization of Ag nanoparticle sintered joints for power die attachment. Molecular Crystals and Liquid Crystals, 604 (1). pp. 11-26. ISSN 1542-1406

Wang, Zheng, Miles, Nicholas J., Wu, Tao, Gu, Fu and Hall, Philip (2016) Recycling oriented vertical vibratory separation of copper and polypropylene particles. Powder Technology, 301 . pp. 694-700. ISSN 0032-5910

Warburton, J.R., Lu, G., Buss, T.M., Docx, H., Matveev, Mikhail Y. and Jones, I.A. (2016) Digital image correlation vibrometry with low speed equipment. Experimental Mechanics, 56 (7). pp. 1219-1230. ISSN 1741-2765

Ward, Michael, Tomczynska, Magdelena M., Grant, David M., Parsons, Andrew J. and De Focatiis, Davide S.A. (2016) The influence of process conditions on the structure and properties of melt processed poly (lactic acid) nanohydroxyapatite composites. In: 3rd International Conference on Bio-based Polymers and Composites, 28th August - 1st September 2016, Szeged, Hungary. (Submitted)

Wardlaw, Jessica, Sprinks, James, Houghton, Robert, Muller, Jan-Peter, Sidiropoulos, Panagiotis, Bamford, Steven and Marsh, Stuart (2017) Comparing experts and novices in Martian surface feature change detection and identification. International Journal of Applied Earth Observation and Geoinformation . ISSN 0303-2434

Warmuth, A.R., Shipway, P.H. and Sun, W. (2015) Fretting wear mapping: the influence of contact geometry and frequency on debris formation and ejection for a steel-on-steel pair. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 471 (2178). pp. 1-22. ISSN 1471-2946

Warmuth, A.R., Sun, W. and Shipway, P.H. (2016) The roles of contact conformity, temperature and displacement amplitude on the lubricated fretting wear of a steel-on-steel contact. Royal Society Open Science, 3 (10). 150637/1-150637/28. ISSN 2054-5703

Watts, Fiona, Tan, Lay Ean, Wilson, Clive G., Girkin, John M., Tassieri, Manlio and Wright, Amanda J. (2013) Investigating the microrheology of the vitreous humor using an optically trapped local probe. Journal of Optics, 16 (1). ISSN 2040-8986

Webb, Joseph P., Arnold, S. Alison, Baxter, Scott, Hall, Stephen J., Eastham, Graham and Stephens, Gill (2018) Efficient bio-production of citramalate using an engineered Escherichia coli strain. Microbiology, 164 . pp. 133-141. ISSN 1465-2080

Williams, Orla, Eastwick, Carol, Kingman, S.W., Giddings, Donald, Lormor, Stephen and Lester, Edward (2017) Overcoming the caking phenomenon in olive mill wastes. Industrial Crops and Products, 101 . pp. 92-102. ISSN 0926-6690

Williams, Orla, Lester, Edward, Kingman, Sam, Giddings, Donald, Lormor, Stephen and Eastwick, Carol (2017) Benefits of dry comminution of biomass pellets in a knife mill. Biosystems Engineering, 160 . pp. 42-54. ISSN 1537-5110

Williams, Orla, Taylor, Simon, Lester, Edward, Kingman, Sam, Giddings, Donald and Eastwick, Carol (2018) Applicability of mechanical tests for biomass pellet characterisation for bioenergy applications. Materials, 11 (8). ISSN 1996-1944

Wilson, Max L., Sharon, Natalia, Maior, Horia A., Midha, Serena, Craven, Michael P. and Sharples, Sarah (2018) Mental workload as personal data: designing a cognitive activity tracker. In: 3rd Symposium on Computing and Mental Health, 22nd April 2018, Montreal, Canada. (In Press)

Worall, Mark (2010) Intelligent thermoregulation and homeostasis: lessons from nature. In: CIB World Congress 2010, 11-13 May 2010, Salford, UK.

Worall, Mark, Elmer, Theo, Riffat, Saffa, Wu, Shenyi and Du, Shangfeng (2017) An experimental investigation of a micro-tubular SOFC membrane-separated liquid desiccant dehumidification and cooling tri-generation system. Applied Thermal Engineering, 120 . pp. 64-73. ISSN 1873-5606

Wright, Andrew and Kennedy, Andrew R. (2016) The processing and properties of syntactic Al foams containing low cost expanded glass particles. Advanced Engineering Materials . ISSN 1527-2648

Wronska, Urszula and Ryan, Brendan (2017) Using contextual information in the evaluation of the effectiveness of barriers restricting access to the main line at stations. In: 6th International Human Factors Rail Conference, 6-9 Nov 2017, London, UK.

Wu, Liyan, Jiao, Zhibin, Song, Yuqiu, Liu, Cuihong, Wang, Huan and Yan, Yuying (2018) Experimental investigations on drag-reduction characteristics of bionic surface with water-trapping microstructures of fish scales. Scientific Reports, 8 . 12186/1-12186/8. ISSN 2045-2322

Xia, Lin, Yu, Linpo, Hu, Di and Chen, George Z. (2017) Review: electrolytes for electrochemical energy storage. Materials Chemistry frontiers . ISSN 2052-1537

Xiang, Yetao and Gan, Guohui (2015) Optimization of building-integrated photovoltaic thermal air system combined with thermal storage. International Journal of Low-Carbon Technologies, 10 (2). pp. 146-156. ISSN 1748-1325

Xiao, Z., Harper, L.T., Kennedy, Andrew R. and Warrior, N.A. (2017) A water-soluble core material for manufacturing hollow composite sections. Composite Structures, 182 . pp. 380-390. ISSN 1879-1085

Xie, Jing and Heath, Tim (2017) Conservation and revitalization of historic streets in China: Pingjiang Street, Suzhou. Journal of Urban Design, 22 (4). pp. 455-476. ISSN 1357-4809

Xie, Liujuan, Sun, Yongge, Uguna, Clement N., Li, Youchuan, Snape, Colin E. and Meredith, Will (2016) Thermal cracking of oil under water pressure up to 900 bar at high thermal maturities. 1. gas compositions and carbon isotopes. Energy & Fuels, 30 (4). pp. 2617-2627. ISSN 1520-5029

Xu, Fang, Kobayashi, Takamichi, Yang, Zhuxian, Sekine, Toshimori, Chang, Hong, Wang, Nannan, Xia, Yongde and Zhu, Yanqiu (2017) How the toughest inorganic fullerene cages absorb shockwave pressures in a protective nanocomposite: experimental evidence from two in situ investigations. ACS Nano, 11 (8). pp. 8114-8121. ISSN 1936-086X

Xu, Jing-Sha, Xu, Hong-Hui, Xiao, Hang, Tong, Lei, Snape, Colin E., Wang, Cheng-Jun and He, Jun (2016) Aerosol composition and sources during high and low pollution periods in Ningbo, China. Atmospheric Research, 178-179 . pp. 559-569. ISSN 01698095

Xu, Zhengkai, Dunleavey, J., Antar, M., Hood, R., Soo, S.L., Kucukturk, G., Hyde, C.J. and Clare, A.T. (2018) The influence of shot peening on the fatigue response of Ti-6Al-4V surfaces subject to different machining processes. International Journal of Fatigue, 111 . pp. 196-207. ISSN 0142-1123

Xu, Zhengkai, Hyde, Christopher J., Thompson, Adam, Leach, Richard K., Maskery, Ian, Tuck, Christopher and Clare, Adam T. (2017) Defect evolution in laser powder bed fusion additive manufactured components during thermo-mechanical testing. In: Joint Special Interest Group meeting between euspen and ASPE Dimensional Accuracy and Surface Finish in Additive Manufacturing, 10-12 Oct2017, Leuven, Belgium.

Yan, Shibo, Zeng, Xuesen, Brown, Louise and Long, Andrew (2017) Geometric modeling of 3D woven preforms in composite T-joints. Textile Research Journal . 004051751771209. ISSN 0040-5175

Yang, Bo, Chen, Sheng and Liu, Kai (2017) Direct numerical simulations of particle sedimentation with heat transfer using the Lattice Boltzmann method. International Journal of Heat and Mass Transfer, 104 . pp. 419-437. ISSN 0017-9310

Yang, C., Remenyte-Prescott, Rasa and Andrews, John (2014) Road network modelling for maintenance planning. In: 22nd European Safety and Reliability Conference (ESREL 2013), 29 September-2 October 2013, Amsterdam, Netherlands.

Yang, Chao, Remenyte-Prescott, Rasa and Andrews, John (2015) Road maintenance planning using network flow modelling. IMA Journal of Management Mathematics . ISSN 1471-6798

Yang, Chao, Remenyte-Prescott, Rasa and Andrews, John (2015) Application of network traffic flow model to road maintenance. Proceedings of the ICE - Transport, 168 (3). pp. 256-266. ISSN 1751-7710

Yang, Chao, Remenyte-Prescott, Rasa and Andrews, John D. (2015) Pavement maintenance scheduling using genetic algorithms. International Journal of Performability Engineering, 11 (2). pp. 135-152. ISSN 0973-1318

Yang, Guang, Song, Jialu and Hou, Xianghui (2018) Fabrication of highly hydrophobic two-component thermosetting polyurethane surfaces with silica nanoparticles. Applied Surface Science . ISSN 0169-4332

Yang, Guang, Wang, Chengbo, Liu, Chao, Yang, Zhiyong and Hou, Xianghui (2016) Synthesis and properties of a novel highly thermal stable N-propargyl monomer containing benzoxazole ring. High Performance Polymers . 095400831769043. ISSN 1361-6412

Yang, Li, Agyakwa, Pearl A. and Johnson, C. Mark (2013) Physics-of-failure lifetime prediction models for wire bond interconnects in power electronic modules. IEEE Transactions on Device and Materials Reliability, 13 (1). pp. 9-17. ISSN 1530-4388

Yang, Sen, Zaki, Wan S.W., Morgan, Stephen P., Chow, David H.C., Correia, Ricardo, Wen, Long and Zhang, Yaping (2018) Blood pressure estimation from photoplethysmogram and electrocardiogram signals using machine learning. In: IET Doctoral Forum on Biomedical Engineering, Healthcare, Robotics and Artificial Intelligence 2018 (BRAIN 2018), 4 November 2018, Ningbo, China.

Yang, Yan, Walther, Jens Honore, Yan, Yuying and Wen, Chuang (2017) CFD modeling of condensation process of water vapor in supersonic flows. Applied Thermal Engineering, 115 . pp. 1357-1362. ISSN 1873-5606

Yao, Yuan, Logan, Brian and Thangarajah, John (2016) Intention selection with deadlines. In: 22nd European Conference on Artificial Intelligence (ECAI 2016), 29 August - 2 September 2016, The Hague, Netherlands.

Yartys, Volodymyr A., Lototskyy, Mykhaylo, Linkov, Vladimir, Grant, David, Stuart, Alastair, Eriksen, Jon, Denys, Roman and Bowman, Robert C. (2016) Metal hydride hydrogen compression: recent advances and future prospects. Applied Physics A, 122 (4). 415/1-415/18. ISSN 1432-0630

Yew, Maxine, Ren, Yong, Koh, Kai Seng, Sun, Chenggong, Snape, Colin and Yan, Yuying (2019) Synthesis of microcapsules for carbon capture via needle-based droplet microfluidics. Energy Procedia, 160 . pp. 443-450. ISSN 18766102

Yi, Hao, Qi, Lehua, Luo, Jun, Zhang, Daicong, Li, Hejun and Hou, Xianghui (2018) Effect of the surface morphology of solidified droplet on remelting between neighboring aluminum droplets. International Journal of Machine Tools and Manufacture, 130-131 . pp. 1-11. ISSN 0890-6955

Yianni, P., Neves, Luís C., Rama, D., Andrews, J. and Dean, R. (2017) Bridge asset management using Petri-Nets. In: Stephenson Conference : Research for Railways, 25th-27th April 2017, London, United Kingdom.

Yianni, P.C., Neves, L.C., Rama, D., Andrews, J.D., Tedstone, N. and Dean, R. (2018) Quantifying the impact of variability in railway bridge asset management. In: The Sixth International Symposium on Life-Cycle Civil Engineering (IALCCE 2018), 28-31 October 2018, Ghent, Belgium.

Yianni, Panayioti C., Neves, Luis C., Rama, Dovile and Andrews, John D. (2018) Accelerating Petri-Net simulations using NVIDIA graphics processing units. European Journal of Operational Research, 265 (1). pp. 361-371. ISSN 0377-2217

Yianni, Panayioti C., Neves, Luís C., Rama, Dovile, Andrews, John and Dean, R. (2017) Using Petri-Net modelling for a data-driven approach to bridge management and safety. In: 9th International Conference on Bridge Maintenance, Safety and Management (IABMAS 2018), 9-13 July 2018, Melbourne, Australia. (In Press)

Yianni, Panayioti C., Neves, Luís C., Rama, Dovile, Andrews, John D. and Dean, Robert (2016) Incorporating local environmental factors into railway bridge asset management. Engineering Structures, 128 . pp. 362-373. ISSN 0141-0296

Yianni, Panayioti C., Rama, Dovile, Neves, Luis C., Andrews, John D. and Castlo, David (2016) A Petri-Net-based modelling approach to railway bridge asset management. Structure and Infrastructure Engineering, 13 (2). pp. 287-297. ISSN 1744-8980

Yianni, Panayioti C., Rama, Dovile, Neves, Luís C. and Andrews, John D. (2016) Railway bridge asset management using a Petri-Net modelling approach. In: Fifth International Association for Life-Cycle Civil Engineering, 16-19 Oct 2016, Delft, the Netherlands.

Yin, Shuo, Xie, Yingchun, Cizek, Jan, Ekoi, Emmanuel, Hussain, Tanvir, Dowling, Denis and Lupoi, Rocco (2017) Advanced diamond-reinforced metal matrix composites via cold spray: properties and deposition mechanism. Composites Part B: Engineering, 113 . pp. 44-54. ISSN 1359-8368

Yusuf, Abubakar, Snape, Colin, He, Jun, Xu, Honghui, Liu, Chaojie, Zhao, Ming, Chen, George Zheng, Tang, Bencan, Wang, Chengjun, Wang, Jiawei and Behera, Sailesh N. (2017) Advances on transition metal oxides catalysts for formaldehyde oxidation: a review. Catalysis Reviews: Science and Engineering . pp. 1-45. ISSN 1520-5703

Zacharzewski, Piotr, Jefferson-Loveday, Richard J. and Morvan, Herve (2017) SAS – SST simulations of the flow and heat transfer inside a square ribbed duct with artificial forcing. In: 23rd ISABE Conference, 3-8 Sep 2017, Manchester, UK.

Zacharzewski, Piotr, Simmons, Kathy, Jefferson-Loveday, Richard and Capone, Luigi (2016) Evaluation of the SST-SAS model for prediction of separated flow inside turbine internal cooling passages. In: ASME 2016 Turbo Expo, 13-17 Jun 2016, Seoul, South Korea.

Zeghloul, Ammar, Azzi, Abdelwahid, Saidj, Faiza, Azzopardi, Barry J. and Hewakandamby, Buddhika N. (2015) Interrogating the effect of an orifice on the upward two-phase gas–liquid flow behavior. International Journal of Multiphase Flow, 74 . pp. 96-105. ISSN 0301-9322

Zeng, Xuesen, Long, A.C., Clifford, M.J., Probst-Schendzielorz, S. and Schmitt, M.W. (2011) Automated finite element modelling of 3D woven textiles. In: Third World Conference on 3D Fabrics and their Applications., 20-21 April 2011, Wuhan, China..

Zhang, Bei, Pechprasarn, Suejit and Somekh, Michael G. (2012) Surface plasmon microscopic sensing with beam profile modulation. Optics Express, 20 (27). pp. 28039-28048. ISSN 1094-4087

Zhang, Bei, Pechprasarn, Suejit, Zhang, Jing and Somekh, Michael G. (2012) Confocal surface plasmon microscopy with pupil function engineering. Optics Express, 20 (7). pp. 7388-7397. ISSN 1094-4087

Zhang, Daicong, Qi, Lehua, Luo, Jun, Yi, Hao and Hou, Xianghui (2017) Direct fabrication of unsupported inclined aluminum pillars based on uniform micro droplets deposition. International Journal of Machine Tools & Manufacture, 116 . pp. 18-24. ISSN 0890-6955

Zhang, Daicong, Qi, Lehua, Luo, Jun, Yi, Hao, Hou, Xianghui and Li, Hejun (2017) Geometry control of closed contour forming in uniform micro metal droplet deposition manufacturing. Journal of Materials Processing Technology, 243 . pp. 474-480. ISSN 0924-0136

Zhang, Fan, Hu, Q., Castanon, A., He, Y., Liu, Y., Paul, B.T., Tuck, C.J., Hague, Richard J.M. and Wildman, Ricky D. (2017) Multi-branched benzylidene ketone based photoinitiators for multiphoton fabrication. Additive Manufacturing, 16 . pp. 206-212. ISSN 2214-8604

Zhang, Jizhe, Airey, Gordon D., Grenfell, James, Apeagyei, Alex K. and Barrett, Martyn (2016) Development of a composite substrate peel test to assess moisture sensitivity of aggregate–bitumen bonds. International Journal of Adhesion and Adhesives, 68 . pp. 133-141. ISSN 0143-7496

Zhang, Jizhe, Airey, Gordon D. and Grenfell, James R.A. (2016) Experimental evaluation of cohesive and adhesive bond strength and fracture energy of bitumen-aggregate systems. Materials and Structures, 49 (7). pp. 2653-2667. ISSN 1359-5997

Zhang, Wenbin, Liu, Hao, Sun, Chenggong, Drage, Trevor C. and Snape, Colin E. (2014) Capturing CO2 from ambient air using a polyethyleneimine–silica adsorbent in fluidized beds. Chemical Engineering Science, 116 . pp. 306-316. ISSN 1873-4405

Zhang, Wenbin, Liu, Hao, Sun, Chenggong, Drage, Trevor C. and Snape, Colin E. (2014) Performance of polyethyleneimine–silica adsorbent for post-combustion CO2 capture in a bubbling fluidized bed. Chemical Engineering Journal, 251 . pp. 293-303. ISSN 1385-8947

Zhang, Wenbin, Liu, Hao, Sun, Yuan, Cakstins, Janis, Sun, Chenggong and Snape, Colin E. (2016) Parametric study on the regeneration heat requirement of an amine-based solid adsorbent process for post-combustion carbon capture. Applied Energy, 168 . pp. 394-405. ISSN 0306-2619

Zhang, Wenbin, Sun, Chenggong, Snape, Colin E., Irons, Robin, Stebbing, Simon, Alderson, Tony, Fitzgerald, David and Liu, Hao (2017) Process simulations of post-combustion CO2 capture for coal and natural gas-fired power plants using a polyethyleneimine/silica adsorbent. International Journal of Greenhouse Gas Control, 58 . pp. 276-289. ISSN 1750-5836

Zhang, Yang, Adam, Mohamed, Hart, Abarasi, Wood, Joseph, Rigby, Sean P. and Robinson, John P. (2018) Impact of oil composition on microwave heating behavior of heavy oils. Energy & Fuels . ISSN 0887-0624

Zhang, Yang, Andrews, John, Reed, Sean and Karlberg, Magnus (2017) Maintenance processes modelling and optimisation. Reliability Engineering and System Safety . ISSN 0951-8320

Zhang, Yang and Prescott, Darren (2017) Using reliability analysis to support decision making in phased mission systems. Quality and Reliability Engineering International, 33 (8). pp. 2105-2119. ISSN 1099-1638

Zhang, Yong, Zhong, Wenqi, Rui, Xiao, Jin, Baosheng and Liu, Hao (2016) Evaluation of mixing and mixing rate in a multiple spouted bed by image processing technique. International Journal of Chemical Reactor Engineering, 15 (1). pp. 103-115. ISSN 1542-6580

Zhao, D., Omar, R., Abdulkadir, M., Abdulkareem, Lokman A., Azzi, Abdelwahid, Saidj, Faiza, Hernandez Perez, V., Hewakandamby, Buddhika N. and Azzopardi, Barry J. (2016) The control and maintenance of desired flow patterns in bends of different orientations. Flow Measurement and Instrumentation, 53 (B). pp. 230-242. ISSN 1873-6998

Zhao, Dongsheng, Roberts, Gethin Wyn, Lau, Lawrence, Hancock, Craig and Bai, Ruibin (2016) A theoretical and empirical integrated method to select the optimal combined signals for geometry-free and geometry-based three-carrier ambiguity resolution. Sensors, 16 (11). 1929/1-1929/19. ISSN 1424-8220

Zhi, Jing-Hui, Zhang, Li-Zhi, Yan, Yuying and Zhu, Jie (2017) Mechanical durability of superhydrophobic surfaces: the role of surface modification technologies. Applied Surface Science, 392 . pp. 286-296. ISSN 0169-4332

Zhou, Guanghui, Li, Haijun, Liu, Enhai, Li, Bo, Yan, Yuying, Chen, Tong and Chen, Xiaonan (2017) Experimental study on combined defrosting performance of heat pump air conditioning system for pure electric vehicle in low temperature. Applied Thermal Engineering, 116 . pp. 677-684. ISSN 1873-5606

Zhou, Tongyu, Darkwa, Jo and Kokogiannakis, Georgios (2015) Thermal evaluation of laminated composite phase change material gypsum board under dynamic conditions. Renewable Energy, 78 . pp. 448-456. ISSN 1879-0682

Zhou, Wenjie, Xie, Peida, Li, Yong, Yan, Yuying and Li, Bo (2017) Thermal performance of ultra-thin flattened heat pipes. Applied Thermal Engineering, 117 . pp. 773-781. ISSN 1873-5606 (In Press)

Zhou, Wenning, Yan, Yuying, Liu, Xunliang and Liu, Baiqian (2017) Lattice Boltzmann parallel simulation of microflow dynamics over structured surfaces. Advances in Engineering Software . ISSN 0965-9978

Zhou, Wenning, Yan, Yuying, Xie, Yulei and Liu, Baiqian (2017) Three dimensional lattice Boltzmann simulation for mixed convection of nanofluids in the presence of magnetic field. International Communications in Heat and Mass Transfer, 80 . pp. 1-9. ISSN 0735-1933

Zhou, Xiaosong, Sun, Xu, Wang, Qingfeng and Sharples, Sarah (2018) A context-based study of serendipity in information research among Chinese scholars. Journal of Documentation, 74 (3). pp. 526-551. ISSN 0022-0418

Zhu, Chenkai, Ahmed, Ifty, Parsons, Andy, Hossain, Kazi Md Zakir, Rudd, Chris D., Liu, Jingsong and Liu, Xiaoling (2017) Structural, thermal, in vitro degradation and cytocompatibility properties of P2O5-B2O3-CaO-MgO-Na2O-Fe2O3 glasses. Journal of Non-Crystalline Solids, 457 . pp. 77-85. ISSN 1873-4812

Zhu, Chenkai, Ahmed, Ifty, Parsons, Andy J., Wang, Yunqi, Tan, Chao, Liu, Jingsong, Rudd, Chris D. and Liu, Xiaoling (2017) Novel bioresorbable textile composites for medical applications. In: 21st International Conference on Composite Materials (ICCM-21), 20-25 August 2017, Xi'an, China.

Zhu, Fangfang and Dodd, Nicholas (2019) Quasi-exact solution of the Riemann problem for generalised dam-break over a mobile initially flat bed. Journal of Engineering Mathematics . ISSN 0022-0833

Zhu, Fangfang and Dodd, Nicholas (2018) Riemann solution for a class of morphodynamic shallow water dam-break problems. Journal of Fluid Mechanics, 835 . pp. 1022-1047. ISSN 1469-7645

Zou, Huiming, Wang, Wei, Zhang, Guiying, Qin, Fei, Tian, Changqing and Yan, Yuying (2016) Experimental investigation on an integrated thermal management system with heat pipe heat exchanger for electric vehicle. Energy Conversion and Management, 118 . pp. 88-95. ISSN 0196-8904

de Bono, John P. and McDowell, Glenn R. (2018) On the packing and crushing of granular materials. International Journal of Solids and Structures . ISSN 0020-7683

de Bono, John P. and McDowell, Glenn R. (2018) Micro mechanics of drained and undrained shearing of compacted and overconsolidated crushable sand. Geotechnique, 68 (7). pp. 575-589. ISSN 1751-7656

de Bono, John P. and McDowell, Glenn R. (2018) On the micro mechanics of yielding and hardening of crushable granular soils. Computers and Geotechnics, 97 . pp. 167-188. ISSN 1873-7633

de Bono, John P. and McDowell, Glenn R. (2017) Validation of the log e–log σ normal compression law using particle strength data. Geotechnique . ISSN 1751-7656

de Bono, John P. and McDowell, Glenn R. (2016) The fractal micro mechanics of normal compression. Computers and Geotechnics, 78 . pp. 11-24. ISSN 0266-352X

de Bono, John P. and McDowell, Glenn R. (2016) Investigating the effects of particle shape on normal compression and overconsolidation using DEM. Granular Matter, 18 (3). ISSN 1434-7636

This list was generated on Thu Nov 21 02:09:37 2024 UTC.

LoginAdmin

Items where Division is "University of Nottingham, UK > Faculty of Engineering"

Login
Admin