Browse by Faculties and Schools

Up a level
Export as [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Date | No Grouping
Jump to: A | B | C | D | E | F | G | H | J | K | L | M | N | O | P | Q | R | S | T | W | X | Y | Z
Number of items at this level: 335.

A

Abdul Shukor, Syaimak (2010) The development of a manufacturability analysis system for micro-milling. PhD thesis, University of Nottingham.

Abioye, Taiwo E. (2014) Laser deposition of Inconel 625/tungsten carbide composite coatings by powder and wire feedstock. PhD thesis, University of Nottingham.

Abuazoum, Latifa Abdalla (2011) Advanced model updating methods for generally damped second order systems. PhD thesis, University of Nottingham.

Adams, Marcus J. (2021) Design and operation of a metal hydride reactor within a thermochemical energy store for use in concentrated solar power. PhD thesis, University of Nottingham.

Addison, James Edward (2015) The benefits of thermal management to reduce friction losses in engines. PhD thesis, University of Nottingham.

Afazov, Shukri (2009) Simulation of manufacturing processes and manufacturing chains using finite element techniques. PhD thesis, University of Nottingham.

Agyakwa, Pearl (2004) Creep and microstructural development in P91 weldments at elevated temperature. PhD thesis, University of Nottingham.

Al Owaisi, S.S. (2016) Development of an improved structural integrity assessment methodology for pressurised pipes containing defects. PhD thesis, University of Nottingham.

Al-Abedy, Hiydar Kireem Musraa (2020) Dislocation Density-Based Finite Element Models for Viscoplasticity and Creep of High-Temperature Materials. PhD thesis, University of Nottingham.

Al-Obaidani, Ammar (2009) Development of a photocuring system for cationic epoxy formulations using side emitting optical fibres. PhD thesis, University of Nottingham.

Al-Rasby, Ahmed Nasser (1996) Strategic manufacturing effectiveness: an empirical analysis. PhD thesis, University of Nottingham.

Al-Thamir, Mohaimen Habeeb Makki (2021) Additive manufacturing of WC-Co cermets using composite powders. PhD thesis, University of Nottingham.

Alatorre Troncoso, David (2020) Novel systems for position and force control of slender and compliant robots for in-situ machining. PhD thesis, University of Nottingham.

Alegre Martínez, César (2020) A study of the solid and fluid mechanics of atherosclerotic plaques using numerical simulations. PhD thesis, University of Nottingham.

Alghamdi, Abdulaziz (2014) Mechanical characterisation of novel polyethylene-based nanocomposites. PhD thesis, University of Nottingham.

Alhuthali, Abdullah (2021) Human factors investigation of the behavioural response to cues of a fire emergency. PhD thesis, University of Nottingham.

Ali, Balhassn S. M. (2014) Development of non-destructive small specimen creep testing techniques. PhD thesis, University of Nottingham.

Ali, Zeeshan (2011) Transitional controller design for adaptive cruise control systems. PhD thesis, University of Nottingham.

Almeida, Trevor P. (2010) Hydrothermal synthesis and characterisation of α-Fe2O3 nanorods. PhD thesis, University of Nottingham.

Alogla, Ageel (2021) The impact of adopting Additive Manufacturing on responsive supply chain performance. PhD thesis, University of Nottingham.

Alrayyes, Taleb (2011) The effect of ethanol-gasoline blends on SI engine energy balance and heat transfer characteristics. PhD thesis, University of Nottingham.

Alruqi, Mansoor (2021) Investigating innovative technique for managing Failure Modes and Effects Analysis. PhD thesis, University of Nottingham.

Ammari, H.D. (1989) The heat transfer coefficient on film cooled surfaces. PhD thesis, University of Nottingham.

Annarasa, Vinotharan (2021) Modelling the mechanical response of elastomers: the roles of the network, the filler and the deformation history. PhD thesis, University of Nottingham.

Arshad, Adeel (2021) Assessment of nanomaterials in enhancing the thermophysical properties of phase change materials for thermal management. PhD thesis, University of Nottingham.

Asbjornsson, Einar Jon (2001) Dispersion of grain refiner particles in molten aluminium. PhD thesis, University of Nottingham.

Austin, Jonathan (2024) Inkjet printing heterostructures for optoelectronic device applications. PhD thesis, University of Nottingham.

B

Bailey, D.A. (2005) The effect of damage on the energy absorption potential of composite structures. PhD thesis, University of Nottingham.

Bakker, Otto Jan (2010) Control methodology and modelling of active fixtures. PhD thesis, University of Nottingham.

Balfe, Nora (2010) Appropriate automation of rail signalling systems: a human factors study. PhD thesis, University of Nottingham.

Barman, Tamal (2020) Synthesis of polyfluoroacrylate emulsion and coatings for hydrophobic and icephobic applications. PhD thesis, University of Nottingham.

Basak, Shreeja (2023) The impact of process planning on cost and production losses in additive manufacturing. PhD thesis, University of Nottingham.

Baxter, Steven J. (2010) Numerical simulation of three-dimensional free surface film flow over or around obstacles on an inclined plane. PhD thesis, University of Nottingham.

Baykasoğlu, Adil (1999) Multiple objective decision support framework for configuring, loading and reconfiguring manufacturing cells. PhD thesis, University of Nottingham.

Bellamy, R.A. (1973) The development of model techniques for prediction of creep strains applied to steam turbine casings. PhD thesis, University of Nottingham.

Bhuwal, Akash Singh (2023) Failure analysis and mechanical behaviors of metamaterials. PhD thesis, University of Nottingham.

Biertümpfel, Felix (2021) Robustness analysis of linear time-varying systems with application to aerospace systems. PhD thesis, University of Nottingham.

Bin Azahari, Ahmad Azli (2020) Characterisation of weldability and metallurgical stability of dissimilar metal welds. PhD thesis, University of Nottingham.

Blagdon, Mark (1998) Characterisation of fabric deformation mechanisms during preform manufacture. PhD thesis, University of Nottingham.

Bolingbroke, Richard Kendall (1988) The growth of short fatigue cracks in titanium and aluminium alloys. PhD thesis, University of Nottingham.

Borradaile, Huw (2021) Numerical simulation of DBD plasma actuators for flow control. PhD thesis, University of Nottingham.

Bottome, Kristofer John (2006) The energy absorption of damaged braided and non-crimp fibre composite material structures. PhD thesis, University of Nottingham.

Bowering, Neil (2004) Transition metal modified titanium dioxide photocatalysts for the removal of nitric oxide. PhD thesis, University of Nottingham.

Bowling, William (2024) Experimental studies of ammonia co-fuelled combustion for future internal combustion engines. PhD thesis, University of Nottingham.

Braz de Sousa, Ana Letícia (2020) Preparation and characterisation of polymer microparticles with varying morphologies with application in drug delivery. PhD thesis, University of Nottingham.

Bridle, Michael D.J. (1973) Vibrations of thick plates and shells. PhD thesis, University of Nottingham.

Broadbent, T.P. (1988) The stress analysis of thin-walled screwed tubular joints. PhD thesis, University of Nottingham.

Brown, Kevin Anthony (2007) Finite element modelling of the static and dynamic impact behaviour of thermoplastic composite sandwich structures. PhD thesis, University of Nottingham.

Brown, Nicholas M (2009) Characterisation of emissions and combustion stability of a port fuelled spark ignition engine. PhD thesis, University of Nottingham.

Brown, Robert Alexander (2000) The combustion of titanium powder in air and iron oxide. PhD thesis, University of Nottingham.

Burling, Luke Donald (2006) Novel phosphate glasses for bone regeneration applications. PhD thesis, University of Nottingham.

Burnham-Slipper, Hugh (2009) Breeding a better stove: the use of computational fluid dynamics and genetic algorithms to optimise a wood burning stove for Eritrea. PhD thesis, University of Nottingham.

Burrows, John Antony (1998) An investigation into the cold start performance of automotive diesel engines. PhD thesis, University of Nottingham.

C

Calla, Eklavya (2005) Cold gas spraying of copper and tin onto metallic and non metallic substrates. PhD thesis, University of Nottingham.

Campbell, Katherine Gillian (2011) An investigation into strain within the patellar tendon. PhD thesis, University of Nottingham.

Campbell, Robert Ian (1998) Using feature-based product modelling to integrate design and rapid prototyping. PhD thesis, University of Nottingham.

Campbell, T.D. (1975) Strains, deformations and buckling in very thin torispherical pressure vessel ends. PhD thesis, University of Nottingham.

Cann, Robert James (1977) A fracture mechanics approach to static and fatigue failure in glass reinforced plastics. PhD thesis, University of Nottingham.

Cantero Chinchilla, Sergio (2020) Optimal methodologies for ultrasonic guided-wave based structural health monitoring. PhD thesis, University of Nottingham.

Carrington, Matthew John (2021) Microstructure formation in the Fe-based hardfacing alloy 5183 and its sliding wear behaviour in high temperature water. PhD thesis, University of Nottingham.

Case, Keith (1975) An anthropometric and biomechanical computer model of man. PhD thesis, University of Nottingham.

Cebola, Nuno M.F. (2014) Investigating on-call work in rail infrastructure maintenance. PhD thesis, University of Nottingham.

Chandenduang, Chatrchai (2000) Boundary element analysis of time-dependent material non-linearity. PhD thesis, University of Nottingham.

Chaney, Joel O. (2010) Combustion characteristics of biomass briquettes. PhD thesis, University of Nottingham.

Chokethawai, Komsanti (2010) Microstructural evolution in Fe-Cr-B based alloy powder and thermally sprayed coatings and their wear performance. PhD thesis, University of Nottingham.

Chouvion, Benjamin (2010) Vibration transmission and support loss in MEMS sensors. PhD thesis, University of Nottingham.

Claverley, James David (2014) Development and validation of a 3D vibrating contact probe for micro-CMMs. PhD thesis, University of Nottingham.

Coe, Samuel C. (2008) The deposition, characterisation and biocompatibility of hydroxyapatite and silicon doped hydroxyapatite thin film coatings for orthopaedic applications. PhD thesis, University of Nottingham.

Cooper, Timothy Paul (2023) Investigating challenges in producing adherent Boron Nitride PVD coatings for tooling and additive manufacturing applications. PhD thesis, University of Nottingham.

Correia, Nuno André Curado Mateus (2004) Analysis of the vacuum infusion moulding process. PhD thesis, University of Nottingham.

Cortellino, Francesco (2015) Experimental and numerical investigation of small punch creep test. PhD thesis, University of Nottingham.

Crookston, Jonathan Josiah (2004) Prediction of elastic behaviour and initial failure of textile composites. PhD thesis, University of Nottingham.

Crossley, Richard James (2011) Characterisation of tack for automated tape laying. PhD thesis, University of Nottingham.

Croston, Deborah Louise (2007) The effect of metal oxide additives on the hydrogen sorption behaviour of magnesium hydride. PhD thesis, University of Nottingham.

D

D'Cruz, Mirabelle (1999) Structured evaluation of training in virtual environments. PhD thesis, University of Nottingham.

Dadashi, Nastaran (2012) Human factors of future rail intelligent infrastructure. PhD thesis, University of Nottingham.

Dadashi, Yasamin (2009) Fundamental understanding and future guidance for handheld computers in the rail industry. PhD thesis, University of Nottingham.

Darnton, Nicholas Julian (1997) Fuel consumption and pollutant emissions of spark ignition engines during cold-started drive cycles. PhD thesis, University of Nottingham.

Deshpande, Aditya A. (2009) High temperature aniso-thermal-mechanical analysis of superplastic forming tools. PhD thesis, University of Nottingham.

Di Napoli, Violetta (2021) Dynamics of ring-based CVGs including non-linear geometrical effects. PhD thesis, University of Nottingham.

Dickins, Andrew (2023) Design of a multi-sensor in-situ inspection system for additive manufacturing. PhD thesis, University of Nottingham.

Ding, Liang (2021) Surface texturing on dry-lubricated transmissions and power systems to deliver better performance and simplified systems in aerospace engineering. PhD thesis, University of Nottingham.

Ding, Yi (2009) Effects of elevated temperature exposure on the microstructural evolution of Ni(Cr)-Cr3C2 coated 304 stainless steel. PhD thesis, University of Nottingham.

Dong, Lei (2022) Development and control of vortices over a very low aspect-ratio wing. PhD thesis, University of Nottingham.

Driva, Helen (1997) The role of performance measurement during product design & development in a manufacturing environment. PhD thesis, University of Nottingham.

Du, Xi (2024) Performance of Ti-6Al-4V by laser powder bed fusion: powder feedstock and heat treatment considerations. PhD thesis, University of Nottingham.

Duckworth, Greg (2020) Dynamics and performance of surface finish measurement styli. EngD thesis, University of Nottingham.

E

Eastgate, Richard Mark (2001) The structured development of virtual environments: enhancing functionality and interactivity. PhD thesis, University of Nottingham.

Edwards, Gordon (1974) Cylindrical shell hybrid finite elements. PhD thesis, University of Nottingham.

Ehtiwesh, Amin (2023) A Simulink/Simscape dynamic modelling study on shifting the power output profile of a direct steam generation solar power system with steam/water storage. PhD thesis, University of Nottingham.

Eklund, Jörgen (1986) Industrial seating and spinal loading. PhD thesis, University of Nottingham.

El Mellas, Ismail (2024) Computational investigation of boiling flows within micro-pin fin evaporators for thermal management of high-power density micro-electronics. PhD thesis, University of Nottingham.

Elliott, Kim S. (1987) Stresses at weld toes in tubular joints in offshore structures. PhD thesis, University of Nottingham.

Elshafei, Basem (2023) Data-driven and physics-informed wind prediction in offshore wind farms. PhD thesis, University of Nottingham.

Er, Mahendrawathi (2004) Managing product variety in international supply chains. PhD thesis, University of Nottingham.

Evans, Liam (2013) Experience-based decision support methodology for manufacturing technology selection: a fuzzy-decision-tree mining approach. PhD thesis, University of Nottingham.

F

Fair, G.H. (1988) The effect of shot peening on fatigue and fretting-fatigue of aluminium alloys. PhD thesis, University of Nottingham.

Fan, Yu (2010) Mechanical properties of laser beam welded Ti6Al4V. PhD thesis, University of Nottingham.

Farayibi, Peter Kayode (2014) Laser cladding of Ti-6Al-4V with carbide and boride reinforcements using wire and powder feedstock. PhD thesis, University of Nottingham.

Farbrother, Katrina (2023) Application of a convolutional neural network (CNN) for droplet detection in an aeroengine bearing chamber. PhD thesis, University of Nottingham.

Fenwick, Neal (1996) Recycling of composite materials using fluidised bed processes. PhD thesis, University of Nottingham.

Ferguson, Karen Elizabeth (1999) The electrodeposition of zinc-manganese. PhD thesis, University of Nottingham.

Ferreira, Pedro (2011) An agent-based self-configuration methodology for modular assembly systems. PhD thesis, University of Nottingham.

Ferreira, Pedro N.P. (2011) Resilience in the planning of rail engineering work. PhD thesis, University of Nottingham.

Ferro Barbosa, Cristina (2024) Design, modelling and biofabrication of scaffolds for osteochondral repair. PhD thesis, University of Nottingham.

Foster, N.W. (1976) Film cooling of gas turbine blades. PhD thesis, University of Nottingham.

Fowler, Abigail (2023) Human performance in rail: determining the potential of physiological data from wearable technologies. PhD thesis, University of Nottingham.

Fowler, Gary (2003) Abrasive water-jet: controlled depth milling of titanium alloys. PhD thesis, University of Nottingham.

Fry, Christopher (2013) Development of magnesium-based multilayer PVD coatings for hydrogen storage applications. PhD thesis, University of Nottingham.

G

Gambrill, Richard (2004) The sensitivity of diesel engine performance to fuel injection parameters at various operating points. PhD thesis, University of Nottingham.

Garcia-Gil, Rafael (2003) Forming and consolidation of textile composites. PhD thesis, University of Nottingham.

Gargalis, Leonidas (2021) Optimisation of silicon content in Fe-Si alloys processed via Laser Powder Bed Fusion for an additively manufactured soft magnetic core. PhD thesis, University of Nottingham.

Giddings, Donald (2000) Investigation into the operation of a cement works precalciner vessel. PhD thesis, University of Nottingham.

Gilson, Gareth M. (2012) Cooling of advanced aircraft actuation systems. PhD thesis, University of Nottingham.

Gomez Valdez, Carlos Rafael (2010) The impact of manufacturing flexibility on system performance: a simulation based approach. PhD thesis, University of Nottingham.

Gommer, Frank (2013) Stochastic modelling of textile structures for resin flow analysis. PhD thesis, University of Nottingham.

Gonçalves Lobato de Almeida, Maria Teresa (2021) Design and fabrication of a device for three-dimensional neuronal development. PhD thesis, University of Nottingham.

Gray Cobb, Susan Valerie (1991) Perception and orientation issues in human control of robot motion. PhD thesis, University of Nottingham.

Grieve, David G. (1991) Computer simulation of rotary forging. PhD thesis, University of Nottingham.

Griffin, James (2008) Pattern recognition of micro and macro grinding phenomenon with a generic strategy to machine process monitoring. PhD thesis, University of Nottingham.

Griffin, Joseph W. (2015) Influences of drive torque distribution on road vehicle handling and efficiency. PhD thesis, University of Nottingham.

Griffiths, John R. (1974) Fatigue of glass reinforced plastics under complex stresses. PhD thesis, University of Nottingham.

Groth, Jan-Hendrik (2023) The application of stochastic design strategies to primitive and complex shapes. PhD thesis, University of Nottingham.

Gun, Halit (1997) Boundary element formulations for elastoplastic stress analysis problems. PhD thesis, University of Nottingham.

H

Haffner-Staton, Ephraim (2020) Development of high-throughput electron tomography for 3D morphological characterisation of soot nanoparticles. PhD thesis, University of Nottingham.

Han, Yisong (2006) Microstructural characterisation of GaMnN ferromagnetic semiconductors grown on (001) oriented GaAs substrates by plasma assisted molecular beam epitaxy. PhD thesis, University of Nottingham.

Haq, Shaiq A. (1994) Filament winding machine control using B-spline interpolation. PhD thesis, University of Nottingham.

Harding, Stephen John (2002) A networking model supporting small and medium enterprises to develop new processes and products. PhD thesis, University of Nottingham.

Hardy, S.J. (1983) Finite element analysis of components subjected to ratchetting and creep. PhD thesis, University of Nottingham.

Harper, Lee Thomas (2006) Discontinuous carbon fibre composites for automotive applications. PhD thesis, University of Nottingham.

Hasan, Muhammad Sami (2012) Phosphate glass fibre reinforced composite for bone repair applications: investigation of interfacial integrity improvements via chemical treatments. PhD thesis, University of Nottingham.

Hasell, Tom (2008) Synthesis of metal-polymer nanocomposites. PhD thesis, University of Nottingham.

Hassan, Ali Jameel (2020) Laminated composites of continuous steered fibres along curved paths: characterisation and optimisation. PhD thesis, University of Nottingham.

Hastings, Philip John (1989) The behaviour of short fatigue cracks in a beta-processed titanium alloy. PhD thesis, University of Nottingham.

Hermosilla, Unai (2008) Mechanical modeling of thermal barrier coatings at high temperatures. PhD thesis, University of Nottingham.

Hignett, Sue (2001) Using qualitative methodology in ergonomics: theoretical background and practical examples. PhD thesis, University of Nottingham.

Hilton, Andrew (2010) Proposal for a cost-effective centrifugal rotary blood pump: design of a hybrid magnetic/hydrodynamic bearing. PhD thesis, University of Nottingham.

Hirani, Hitendra J. (2005) Knowledge based requirements specification for reconfigurable assembly systems. PhD thesis, University of Nottingham.

Hollowood, Jacqueline (2011) Perception and performance: an evaluation of multimodal feedback for the assessment of curve shape differences. PhD thesis, University of Nottingham.

Hosking, Niamh C. (2008) Next generation corrosion protection for the automotive industry. PhD thesis, University of Nottingham.

Hossain, Kazi Md Zakir (2014) Extension of the use of cellulose nanowhiskers in composite materials. PhD thesis, University of Nottingham.

Houghton, Dean (2009) Representative fretting fatigue testing and prediction for splined couplings. PhD thesis, University of Nottingham.

Houlston, Paul Robert (2007) Active vibration control of rotating machines. PhD thesis, University of Nottingham.

Hussain, Tanvir (2011) A study of bonding mechanisms and corrosion behaviour of cold sprayed coatings. PhD thesis, University of Nottingham.

Hussain, Tanweer (2012) Modelling and controlling variation propagation in mechanical assembly of high speed rotating machines. PhD thesis, University of Nottingham.

Hyde, T.H. (1976) Experimental reference stress techniques for the prediction of creep deformation using lead alloy models. PhD thesis, University of Nottingham.

J

Johnson, Michael S. (1995) The application of microwave preheating in resin transfer moulding. PhD thesis, University of Nottingham.

Jones, Ivor Arthur (1993) Finite element modelling and testing of filament-wound orthotropic components. PhD thesis, University of Nottingham.

Jones, Mark (2002) Properties of HVOF sprayed TiC and TiB2-based cermet coatings. PhD thesis, University of Nottingham.

Jukes, Timothy N. (2007) Turbulent drag reduction using surface plasma. PhD thesis, University of Nottingham.

Julien, Denyse (1998) An investigation into the effectiveness of statistical process control techniques, with management data from a product development environment. PhD thesis, University of Nottingham.

K

Kabli, Mohammad Reda (2009) A multi-attribute decision making methodology for selecting new R&D projects portfolio with a case study of Saudi oil refining industry. PhD thesis, University of Nottingham.

Kalita, Karuna (2007) Integrating rotordynamic and electromagnetic dynamic models for flexible-rotor electrical machines. PhD thesis, University of Nottingham.

Kang, JiJun (2013) Determination of elastic-plastic and visco-plastic material properties from instrumented indentation curves. PhD thesis, University of Nottingham.

Kaprielian, P.V. (1985) The effect of holes and free edges on the stress in laminated plates. PhD thesis, University of Nottingham.

Karim, Shah (2020) Real-time target alignment system for high-power laser operations using a hybrid mechanism. PhD thesis, University of Nottingham.

Katsikis, Spyros (2001) Effect of copper and magnesium on the precipitation characteristics of Al-Li-Mg, Al-Li-Cu and Al-Li-Cu-Mg alloys. PhD thesis, University of Nottingham.

Keeler, Benjamin (2009) Constraints on the operation of a DI diesel engine in partially-premixed combustion mode. PhD thesis, University of Nottingham.

Kennerley, Jonathan (1998) Recycling fibres recovered from composite materials using a fluidised bed process. PhD thesis, University of Nottingham.

Kerr, Steven John (2005) Developing scaffolded virtual learning environments for people with autism. PhD thesis, University of Nottingham.

Khan, James (2022) Human factors considerations for ultrasound induced mid-air haptic feedback. PhD thesis, University of Nottingham.

Kipping, Michael (2009) Wear and degradation of uhmwpe total hip replacement components. PhD thesis, University of Nottingham.

Kirupanantham, Giridharan (2013) Characterisation of discontinuous carbon fibre preforms for automotive applications. PhD thesis, University of Nottingham.

Kong, Chang Jing (2004) Microstructural evolution in AISn-based gas atomised powder and thermally sprayed coatings. PhD thesis, University of Nottingham.

Koti, Daniel (2024) An investigation of the ABA laser cladding process: A new Laser – Direct Energy Deposition (DED) technique. PhD thesis, University of Nottingham.

Koutsonas, Spiridon (2015) Race-track modelling and variability in RTM for advanced composites structures. PhD thesis, University of Nottingham.

Krasachol, Ladawan (1999) The development of quality management in Thailand. PhD thesis, University of Nottingham.

Kubba, Basil (1981) Use of the finite element method for the vibration analysis of rotating machinery. PhD thesis, University of Nottingham.

Kuno, Masato (1988) Fretting damage of high carbon chromium bearing steel. PhD thesis, University of Nottingham.

Kurup, Shalaka (2020) Rail passenger knowledge and its impact on information requirements. PhD thesis, University of Nottingham.

L

La Porta, Corrado (2024) Investigating the impact of copper leaching on the combustion and emissions characteristics of a direct injection diesel engine. PhD thesis, University of Nottingham.

Lang, Alexandra R. (2012) Medical device design for adolescents. PhD thesis, University of Nottingham.

Langley, Alyson (2010) Evaluation of the median nerve within the wrist during functional hand activity using ultrasonography. PhD thesis, University of Nottingham.

Lawson, Glyn (2011) Predicting human behaviour in emergencies. PhD thesis, University of Nottingham.

Lawton, Alan (1988) The dynamic interaction between a magnetically levitated vehicle and a flexible track. PhD thesis, University of Nottingham.

Leadbeater, G. (1983) The effect of shot peening on the initiation of fatigue cracks by fretting. PhD thesis, University of Nottingham.

Li, Peifeng (2023) Processing, microstructure, and tribological properties of WS2 reinforced aluminium metal matrix composite: laser powder bed fusion vs. spark plasma sintering. PhD thesis, University of Nottingham.

Li, Qiang (2009) Virtual reality for fixture design and assembly. PhD thesis, University of Nottingham.

Li, Qingquan (2013) Microstructured optical fibres in chalcogenide glass. MPhil thesis, University of Nottingham.

Li, You (2021) Inkjet printing of thin film transistors. PhD thesis, University of Nottingham.

Lidgett, Mark Jonathan (2012) Multi-scale modelling of polymer composite materials at high rates of strain. PhD thesis, University of Nottingham.

Liu, Hao (2014) Modified thermal reduction of graphene oxide. PhD thesis, University of Nottingham.

Liu, Yaan (2020) Additive manufacture of three dimensional metal-polymer nanocomposites through two-photon fabrication. PhD thesis, University of Nottingham.

Liu, Ying (2014) Multi-objective optimisation methods for minimising total weighted tardiness, electricity consumption and electricity cost in job shops through scheduling. PhD thesis, University of Nottingham.

Lohse, Niels. (2006) Towards an ontology framework for the integrated design of modular assembly systems. PhD thesis, University of Nottingham.

Long, Tobias (2023) Development of the next generation of silent aerospace propulsion configurations. MPhil thesis, University of Nottingham.

Lourenço, Nuno F.S. (2002) Predictive Finite Element Method for axial crush of composite tubes. PhD thesis, University of Nottingham.

Lowe, Julian Robert (1993) Void formation in resin transfer moulding. PhD thesis, University of Nottingham.

Lu, Shimin (2024) Deposition behaviour of carbon fibres processed by automated dry fibre placement (ADFP). PhD thesis, University of Nottingham.

Luo, Renfan (2002) Fatigue of dented pipes. PhD thesis, University of Nottingham.

lyu, Xipeng (2022) An improved SPH method and its application in the turbulence multiphase flow in the bearing chamber of aeroengine. PhD thesis, University of Nottingham.

M

MacMillan, David James (2009) Influences on the cold start behaviour of a diesel engine at reduced compression ratio. PhD thesis, University of Nottingham.

Madge, Jason John (2009) Numerical modelling of the effect of fretting wear on fretting fatigue. PhD thesis, University of Nottingham.

Mak, Kuok Hang (2011) Vibration modelling and analysis of piezoelectric energy harvesters. PhD thesis, University of Nottingham.

Maligno, Angelo Rosario (2008) Finite element investigations on the microstructure of composite materials. PhD thesis, University of Nottingham.

Mansour, Saeed (1988) A computer package for simulation and analysis of rotary forging. PhD thesis, University of Nottingham.

Marecki, Malcolm (2024) Lithium-ion battery rightsizing technologies for future road transport applications. PhD thesis, University of Nottingham.

Margaritis, Dimitris-Peter (2003) Interfacial bonding in metal-matrix composites reinforced with metal-coated diamonds. PhD thesis, University of Nottingham.

Marrocco, Tiziana (2008) Development of improved cold spray and HVOF deposited coatings. PhD thesis, University of Nottingham.

Marshall, Eleanor (2005) Experimental evaluation of interaction design in virtual reality. PhD thesis, University of Nottingham.

Matelloni, Paolo (2012) Metal supported carbon nanostructures for hydrogen storage. PhD thesis, University of Nottingham.

McCaldin, Simon Roger (2007) Hydrogen storage in graphitic nanofibres. PhD thesis, University of Nottingham.

McGhee, Michael James (2013) Factors influencing cycle-by-cycle combustion characteristics of a diesel engine under cold idling conditions. PhD thesis, University of Nottingham.

Medrano Téllez, Alexis G. (2010) Fibre laser metal deposition with wire: parameters study and temperature control. PhD thesis, University of Nottingham.

Mejia Pantoja de Cavin, Shirley Gisela (2012) An integrated framework for implementing technology roadmapping in industry. PhD thesis, University of Nottingham.

Memon, Halar (2021) Research and development of polyurethane icephobic composite coatings. PhD thesis, University of Nottingham.

Micallef, Christopher (2006) End winding cooling in electric machines. PhD thesis, University of Nottingham.

Mo, Fan (2024) Asset selection and optimisation for robotic assembly cell reconfiguration. PhD thesis, University of Nottingham.

Modi, Dhiren (2008) Modelling and active control of the Vacuum Infusion Process for composites manufacture. PhD thesis, University of Nottingham.

Mohammed, Arif (2012) Applying laser irradiation and intelligent concepts to identify grinding phenomena. PhD thesis, University of Nottingham.

Mohd Hasni, Yasmin (2012) An exploration of cultural needs for in-vehicle navigation systems (IVNS). PhD thesis, University of Nottingham.

Momma, Takahiro (1991) Cavitation loading and erosion produced by a cavitating jet. PhD thesis, University of Nottingham.

Morgan, Tessa Joanne (2003) The modelling of internal combustion engine thermal systems and behaviour. PhD thesis, University of Nottingham.

Munshi, Sweta (2024) Investigating the dehydrogenation pathway for lithium borohydride / hydroxide system. PhD thesis, University of Nottingham.

Murray, James W.H. (2014) Damage, contamination and surface treatment of electrical discharge machined materials. PhD thesis, University of Nottingham.

N

Nagswasdi, Montalee (1998) Development of a framework for the transfer of quality management to Thai industry. PhD thesis, University of Nottingham.

Nahvi, Saied Mehran (2011) Abrasive wear behaviour of steels and advanced HVOF-sprayed WC-M coatings. PhD thesis, University of Nottingham.

Napoli, Carmine (2021) Quantum-enhanced strategies for surface and phase discrimination. PhD thesis, University of Nottingham.

Neely, Andy (1993) Congruence and its role in manufacturing strategy: an audit of goals and systems. PhD thesis, University of Nottingham.

Niaz, Akbar (2013) Complementary use of electrochemical testing techniques to study corrosion processes of HVOF Inconel 625, CoNiCrAIY and WCCoCr coatings. PhD thesis, University of Nottingham.

Nicholls, Tristan Kit (2013) Adhesive bonding of discontinuous carbon fibre composites: an experimental investigation. PhD thesis, University of Nottingham.

Nicoli, Andrew (2020) Development and application of a fully coupled eulerian thin film/discrete phase approach to a simplified aeroengine bearing chamber. PhD thesis, University of Nottingham.

Norris, Beverley (1998) Expectations of safety: realising ergonomics and safety in product design. PhD thesis, University of Nottingham.

Nuttall, P.A. (1973) Precipitation hardening in magnesium alloys. PhD thesis, University of Nottingham.

O

O'Donnell, Matthew David (2004) Tellurite And Fluorotellurite Glasses For Active And Passive Fibreoptic Waveguides. PhD thesis, University of Nottingham.

Orsini, Paolo (2009) A hermite radial basis functions control volume numerical method to simulate transport problems. PhD thesis, University of Nottingham.

P

Pacino, Andrea (2024) Morphological and structural characterization of soot-in-oil samples and their impact on marginally lubricated engine components. PhD thesis, University of Nottingham.

Padrao, Daniel (2024) Thermofluid optimisation of additive manufacturing high heat flux components for fusion. PhD thesis, University of Nottingham.

Palmer, James Dirk (1994) Vibrational energy flow in structures. PhD thesis, University of Nottingham.

Papastathis, Thomas (2011) Modelling and design methodology for fully-active fixtures. PhD thesis, University of Nottingham.

Parkes, D.A.C. (1973) Finite element analysis of stresses and creep in turbine casings. PhD thesis, University of Nottingham.

Patel, Critesh (2013) Development of discontinuous fibre preforming processes. PhD thesis, University of Nottingham.

Patel, Rupesh (2013) Modelling analysis and optimisation of cantilever piezoelectric energy harvesters. PhD thesis, University of Nottingham.

Peduto, D. (2015) Oil droplet impact dynamics in aero-engine bearing chambers: correlations derived from direct numerical simulations. PhD thesis, Karlsruhe Institute of Technology and University of Nottingham.

Pickering, Simon Gilchrist (1994) The stability of articulated tipping trailer units. PhD thesis, University of Nottingham.

Pimm, Andrew James (2011) Analysis of flexible fabric structures. PhD thesis, University of Nottingham.

Piper, David (1987) A mathematical model of frost heave in granular materials. PhD thesis, University of Nottingham.

Plant, Robert J. (2024) Optimising laser stereolithography for constructing electronic packages onto novel substrates. PhD thesis, University of Nottingham.

Popplewell, Keith (1980) Multi-product, multi-level product control system analysis. PhD thesis, University of Nottingham.

Price, Timothy Simon (2008) Cold gas dynamic spraying of titanium coatings. PhD thesis, University of Nottingham.

Price, Tobias E.C. (2010) Multi-component complex hydrides for hydrogen storage. PhD thesis, University of Nottingham.

Prosser, J.L. (2024) High capacity metal and mixed metal borohydride ammoniates for hydrogen energy storage applications. PhD thesis, University of Nottingham.

Pulsford, Jamie C H (2020) An investigation of cermet and composite HVOF thermal spray coatings for internal surfaces. EngD thesis, University of Nottingham.

Q

Qian, Connie Cheng (2014) Structural optimisation of discontinuous carbon fibre composites. PhD thesis, University of Nottingham.

R

Raimondi, Luca (2021) Towards the understanding of the transient behaviour and sources of variability on the process outcomes in inertia friction welding. PhD thesis, University of Nottingham.

Rapley, Steve (2009) Computational investigation of torque on spiral bevel gears. PhD thesis, University of Nottingham.

Ratcliffe, Jonathan Albert (2011) Three dimensional cell reconstructions for morphological analysis and modelling. PhD thesis, University of Nottingham.

Rayner, Glen (2004) Creep of welded branched pipes. PhD thesis, University of Nottingham.

Reeves, Philip E. (1998) Reducing the surface deviation of stereolithography components. PhD thesis, University of Nottingham.

Reyes-Luna, Juan Francisco (2023) Inkjet printing digital image generation and compensation for surface chemistry effects. PhD thesis, University of Nottingham.

Ribeaux, Michael (2003) Energy absorbtion capability of damage affected composite structures. PhD thesis, University of Nottingham.

Roberts, Jacob Thomas (2007) Splitting techniques in vertical pneumatic conveying. PhD thesis, University of Nottingham.

Robinson, Benjamin L (2021) Giving all energy stakeholders a voice: developing a theoretical framework for the uptake and sustained use of improved/clean biomass energy technologies. PhD thesis, University of Nottingham.

Robles Linares Alvelais, Jose Alberto (2022) Bone: A study of machining-induced damage and the role of interstitial fluid. PhD thesis, University of Nottingham.

Roshier, Amanda Louise (2005) Observation and quantification of pathological lesions in the musculoskeletal structures of the cervical spine. PhD thesis, University of Nottingham.

Rowell, Stuart (2007) Modelling the control strategies for riding a motorcycle. PhD thesis, University of Nottingham.

Ruijter, Wout (2009) Analysis of mechanical properties of woven textile composites as a function of textile geometry. PhD thesis, University of Nottingham.

Ryll, Marco (2011) Towards a software framework for reconfigurable and adaptive fixturing systems. PhD thesis, University of Nottingham.

S

Saad, Abdullah Aziz (2012) Cyclic plasticity and creep of power plant materials. PhD thesis, University of Nottingham.

Sabard, Alexandre (2020) Solution heat treatment of gas-atomised aluminium alloy powder for cold spray. PhD thesis, University of Nottingham.

Saber, Mohammed (2011) Experimental and finite element studies of creep and creep crack growth in P91 and P92 weldments. PhD thesis, University of Nottingham.

Saeidi, Saman (2011) Microstructure, oxidation & mechanical properties of as-sprayed and annealed HVOF & VPS CoNiCrAIY coatings. PhD thesis, University of Nottingham.

Saghafifar, Hassan (2011) Microstructural stability of a nickel-based alloy overlay on a 2.25Cr1Mo steel substrate. PhD thesis, University of Nottingham.

Sahari, Berkawi Bin (1984) Finite element investigation of the incremental deformation of components. PhD thesis, University of Nottingham.

Saikayasit, Rossukorn (2011) The influence of communication modality and shared visual information on collaboration in virtual teams. PhD thesis, University of Nottingham.

Saldaeva, Elena (2010) Through thickness air permeability and thermal conductivity analysis for textile materials. PhD thesis, University of Nottingham.

Schubel, Peter James (2004) Characterisation of 'class A' polymer composites for the automotive industry. PhD thesis, University of Nottingham.

Sefton, Joseph (2024) Synthesis of ω-vinyl methacrylic polymers via in situ catalytic chain transfer polymerisation for photopolymer additive manufacturing applications. PhD thesis, University of Nottingham.

Serratos Pérez, J. Nieves (1994) Postural fatigue of the shoulder: relationships between maximum endurance, subjective perception and electromyographic responses. PhD thesis, University of Nottingham.

Shafique, Usman (2022) A rapid flow assessment tool for automated dry fibre preforms – a numerical and experimental study. PhD thesis, University of Nottingham.

Shah, Darshil Upendra (2013) Characterisation and optimisation of the mechanical performance of plant fibre composites for structural applications. PhD thesis, University of Nottingham.

Shahaj, Annabel (2010) Mitigation of vibration in large electrical machines. PhD thesis, University of Nottingham.

Shaheen, Amrozia (2021) Development of a multi-view fringe projection system for coordinate metrology. PhD thesis, University of Nottingham.

Sherburn, Martin (2007) Geometric and Mechanical Modelling of Textiles. PhD thesis, University of Nottingham.

Si, Yuqian (2023) On the use of swept frequency alternating current potential difference method and skin effect to detect feature geometry in flawed conductors. PhD thesis, University of Nottingham.

Silalahi, Rizky Luthfian Ramadhan (2024) Perceptions of work safety and risk in Indonesian small food-producing businesses. PhD thesis, University of Nottingham.

Silbernagel, Cassidy (2019) Investigation of the design, manufacture and testing of additively manufactured coils for electric motor applications. PhD thesis, University of Nottingham.

Sime, Anthony P. (1998) Stress analysis of overlapped crankshafts. PhD thesis, University of Nottingham.

Smale, Daniel M. (2011) Towards an integrated framework for the configuration of modular micro assembly systems. PhD thesis, University of Nottingham.

Soh, Hian Ping (2006) Fretting wear studies of aeroengine materials. PhD thesis, University of Nottingham.

Southon, Nicholas Edward (2020) In-process monitoring of powder bed fusion with fringe projection. PhD thesis, University of Nottingham.

Spackman, George (2024) Optimisation of 3D profiled woven composite structures. PhD thesis, University of Nottingham.

Sreekumar, Abhilash (2022) Multiscale aeroelastic modelling in porous composite structures. PhD thesis, University of Nottingham.

Sriratanasak, Natthapol (2024) A multimodal miniaturised soft robot for accessing remote areas by passive-flight and wall-climbing. PhD thesis, University of Nottingham.

Srisook, Chirattikan (2024) Assessment of mitral valve geometry for personalised annuloplasty ring development. PhD thesis, University of Nottingham.

Staples, Bernard Christopher (2020) An investigation of squeeze film bearings. PhD thesis, University of Nottingham.

Strachan, Jamie Robert (2009) NOVA: Nottingham Off-road Vehicle Architecture. PhD thesis, University of Nottingham.

Sudaprasert, Tippaban (2002) An investigation of microstructure and sliding wear in thermally sprayed WC-Co coatings. PhD thesis, University of Nottingham.

Sun, Qiangqiang (2021) Micro- and nano-scale fluid flow and heat transfer with phase change in a channel. PhD thesis, University of Nottingham.

Sun, Wei (1996) Creep of service-aged welds. PhD thesis, University of Nottingham.

T

Talbot, Frances Mary (1982) Perturbation and asymptotic methods in mechanics and waves. PhD thesis, University of Nottingham.

Tanner, David W. J. (2009) Life assessment of welded INCONEL 718 at high temperature. PhD thesis, University of Nottingham.

Tas, Mahmut (2022) Development of electrospun multifunctional fibrous structures for icephobic and superhydrophobic applications. PhD thesis, University of Nottingham.

Taylor, Jennifer (2012) The characteristics and perception of small wind system noise. PhD thesis, University of Nottingham.

Telepeni, Irvin Petelo Lose (2009) Investigation of dihydrogen interactions with activated graphitic nanostructures and novel metal-organic frameworks. PhD thesis, University of Nottingham.

Thawesaengskulthai, Natcha (2007) Selecting quality management and improvement initiatives: case studies of industries in Thailand. PhD thesis, University of Nottingham.

Thierry, Victor (2020) Numerical simulation of elastic wave propagation in textile composite structures. PhD thesis, University of Nottingham.

Thomas, Matthew (2022) Improving coherence scanning interferometry signal modelling and topography measurement for complex surfaces. PhD thesis, University of Nottingham.

Thompson, Matthew (2023) Geometrical modelling of braided textiles. PhD thesis, University of Nottingham.

Thornton, Angela Claire (2024) Our futures in mind uploading: public perceptions and narratives. PhD thesis, University of Nottingham.

Thornton, Matthew James (2005) Catalytic carbon deposition on 3-dimensional carbon fibre supports. PhD thesis, University of Nottingham.

Tietje, Carsten (2009) Design for microassembly: a methodology for product design and process selection. PhD thesis, University of Nottingham.

Tighe, Christopher James Frederick (2011) Thermal management of solid state power switches. PhD thesis, University of Nottingham.

Torayev, Agajan (2024) A holistic methodology for manufacturing systems configuration. PhD thesis, University of Nottingham.

Towle, Josie A. (1986) Increasing the precision of measurement of postures in free space. PhD thesis, University of Nottingham.

Turner, Matthew Richard (1998) Tow placement studies for liquid composite moulding. PhD thesis, University of Nottingham.

Turner, Thomas A. (2004) The effects of processing variables on the energy absorption of composite crash structures. PhD thesis, University of Nottingham.

W

Walter, Daniel Mark (2007) Investigation into the use of carbon nanofilaments in bone repair applications. PhD thesis, University of Nottingham.

Wan Mahmood, Wan Mohd Faizal (2011) Computational studies of soot paths to cylinder wall layers of a direct injection diesel engine. PhD thesis, University of Nottingham.

Wang, Jie (2020) Nickel-based coatings and structures for hydrophobic/icephobic applications. PhD thesis, University of Nottingham.

Wang, Jinhuo (2008) Predictive modelling and experimental measurement of composite forming behaviour. PhD thesis, University of Nottingham.

Wang, Xi (2024) Multi-modal thin soft robots for narrow space locomotion. PhD thesis, University of Nottingham.

Wang, Zhijian (2010) Rapid manufacturing of vacuum forming components utilising reconfigurable screw pin tooling. PhD thesis, University of Nottingham.

Warneford, Ian Paul (1975) Natural convection from an inclined flat plate. PhD thesis, University of Nottingham.

Webb, Philip Francis (1994) An ultrasonics based system for the extraction of range and bearing data for multiple targets. PhD thesis, University of Nottingham.

Webb, Thomas Andrew. (2010) Power losses in spiral bevel gears. PhD thesis, University of Nottingham.

Whalley, Richard David (2011) Turbulent boundary-layer control with DBD plasma actuators using spanwise travelling-wave technique. PhD thesis, University of Nottingham.

Whitaker, Iain Robert (1994) The structure and properties of autogenous laser beam welds in aluminium alloys. PhD thesis, University of Nottingham.

Wiggers, Joram (2007) Analysis of textile deformation during preforming for liquid composite moulding. PhD thesis, University of Nottingham.

Wilson, Daniel John (2024) Understanding the causes and effects of defects in advanced sheet moulding compounds. PhD thesis, University of Nottingham.

Wilson, Martin J. (2003) Finite element analysis of glass fibre reinforced thermoplastic composites fore structural automotive components. PhD thesis, University of Nottingham.

Wiseman, Marc William (1990) Spark ignition engine combustion process analysis. PhD thesis, University of Nottingham.

Wolfson, David R. (2007) Biomechanics of shaken baby syndrome. PhD thesis, University of Nottingham.

Wong, Chee Chiew (2006) Modelling the effects of textile preform architecture on permeability. PhD thesis, University of Nottingham.

Woolhead, Simon (2015) Piston control for an Integral Compression Wind Turbine. PhD thesis, University of Nottingham.

Wu, Wen (2024) Physics-based guided wave structural health monitoring, and its integration in asset management modelling. PhD thesis, University of Nottingham.

X

Xiao, Xueliang (2012) Modeling the structure-permeability relationship for woven fabrics. PhD thesis, University of Nottingham.

Xu, Peng (2009) Turbulent flow control using spanwise travelling wave via Lorentz forcing. PhD thesis, University of Nottingham.

Y

Yaghi, Anas H. (1993) Static and dynamic brittle fracture. PhD thesis, University of Nottingham.

Z

Zacharzewski, Piotr (2023) Improving accuracy and efficiency of CFD simulations of complex geometry and high-Re turbine blade cooling systems. PhD thesis, University of Nottingham.

Zammit, Jean-Paul (2013) Managing engine thermal state to reduce friction losses during warm-up. PhD thesis, University of Nottingham.

Zangrossi, Francesco (2021) R&D of carbon nanotubes based nanocomposites for self-heating and de-icing applications. PhD thesis, University of Nottingham.

Zhang, Yan (2009) Changes in microstructure and mechanical properties of P91 weld metal during creep. PhD thesis, University of Nottingham.

Zhao, Xuelei (2023) Investigations into Two New Variants of the Hybrid Incremental Sheet Forming Processes. PhD thesis, University of Nottingham.

Zhuo, Peng (2020) 3D printing technology of continuous fibre reinforced polymeric composites for key load carrying structural parts and components. PhD thesis, University of Nottingham.

This list was generated on Sun Oct 13 05:09:37 2024 UTC.