Number of items at this level: 976.
A
AL-Sarri, Hussein A. H.
(2019)
A new unified constitutive model for natural clay and sand.
PhD thesis, University of Nottingham.
Abayzeed, Sidahmed
(2016)
Sensing voltage dynamics with differential intensity surface plasmon resonance system.
PhD thesis, University of Nottingham.
Abdelsalam, Ahmed Ehab
(2023)
Resilient design for London's elevated social spaces: exploring challenges, opportunities, and harnessing interactive virtual reality co-design approaches for community engagement.
PhD thesis, University of Nottingham.
Abdi, Meisam
(2015)
Evolutionary topology optimization of continuum structures using X-FEM and isovalues of structural performance.
PhD thesis, University of Nottingham.
Abdul Hamid, Nor Hazren
(2017)
Development of new mathematical modelling for remediation process: case studies on remediation of copper from water matrices using cellulose nanowhisker adsorbents.
PhD thesis, University of Nottingham.
Abdul Hassan, Norhidayah
(2013)
Microstructural characterisation of rubber modified asphalt mixtures.
PhD thesis, University of Nottingham.
Abdul Rahman, Norhafizah
(2014)
User-friendly street in Malaysia.
PhD thesis, University of Nottingham.
Abdulahi, Abolore
(2014)
Investigating the effect of liquid viscosity on two-phase gas-liquid flows.
PhD thesis, University of Nottingham.
Abebe, Robert
(2018)
End winding mount integrated motor drive.
PhD thesis, University of Nottingham.
Abed, Ahmed
(2019)
Mix design, mechanical analysis and performance modelling of warm mix asphalt.
PhD thesis, University of Nottingham.
Abeywardena, Chalani Lakshani
(2021)
Fibre optic pressure sensors in healthcare applications.
PhD thesis, University of Nottingham.
Abioye, Taiwo E.
(2014)
Laser deposition of Inconel 625/tungsten carbide composite coatings by powder and wire feedstock.
PhD thesis, University of Nottingham.
Abodhir, Nourdeen Abdulslam
(2017)
Resonant power converter control for industrial magnetron.
PhD thesis, University of Nottingham.
Aboshady, Fathy
(2019)
Advances in impedance based fault location in distribution systems.
PhD thesis, University of Nottingham.
Abou-Foul, Mustafa
(2019)
Moisture transport through pores in porous asphalt pavement materials.
PhD thesis, University of Nottingham.
Aboulatta, Waddaa
(2020)
Modeling 2D swash zone hydro/morphodynamics using discontinuous Galerkin finite element method.
PhD thesis, University of Nottingham.
Aboulkhair, Nesma T.
(2016)
Additive manufacture of an aluminium alloy: processing, microstructure, and mechanical properties.
PhD thesis, University of Nottingham.
Abu Hassan, Mohd Hafiz
(2017)
Pre-combustion CO2 capture by hydrate formation using silica as a promoter.
PhD thesis, University of Nottingham.
Abu-Jalala, Al-Hussein
(2021)
Performance improvement of synchronous generators through accurate modelling and integration of power electronics.
MPhil thesis, University of Nottingham.
Acheampong, Edward
(2020)
Mathematical modelling of wastewater treatment processes for the removal of emerging pollutants.
PhD thesis, University of Nottingham.
Acuña Ureta, David E.
(2020)
Theoretical foundations of uncertain event prognosis and predictive Bayesian Cramer-Rao bounds.
PhD thesis, University of Nottingham.
Adam, Mohamed A.B.
(2017)
Understanding microwave pyrolysis of biomass materials.
PhD thesis, University of Nottingham.
Adam, Sarhat M.
(2015)
Digital images for road surface monitoring.
PhD thesis, University of Nottingham.
Adeniyi, Akinola A.
(2015)
A coupled Lagrangian-Eulerian framework to model droplet to film interaction with heat transfer.
PhD thesis, University of Nottingham.
Agarwal, Vivek
(2022)
Study of groundwater properties and behaviour using geospatial techniques.
PhD thesis, University of Nottingham.
Agbo, Simon
(2024)
Sustainable aviation fuels (SAF) production. process and techno-economic assessment modelling of gas fermentation with SCWG heat integration.
PhD thesis, University of Nottingham.
Ageeva, Victoria
(2016)
Endoscopic cheap optical transducers (CHOTs) for on-wing ultrasonic inspection.
PhD thesis, University of Nottingham.
Aguilar-Santana, Jorge Luis
(2022)
Novel thin-film photovoltaic vacuum glazing.
PhD thesis, University of Nottingham.
Ahmad, Junaid
(2019)
Ultrasound mediation of bioluminescence generated inside optically scattering media.
PhD thesis, University of Nottingham.
Ahmed, Abdallah
(2023)
Experimental and numerical heat transfer investigation of reverse jet impingement.
PhD thesis, University of Nottingham.
Ahmed, Imtiaz
(2020)
Design of heavy-duty pavements incorporating a granular interlayer.
PhD thesis, University of Nottingham.
Ahmed, Mohamed
(2023)
Techno-economic and environmental assessment of CO2 utilisation processes for the production of dimethyl ether and olefins.
PhD thesis, University of Nottingham.
Ahmed, Nuhaize
(2023)
Formation mechanisms and performance of electrical discharge coatings.
PhD thesis, University of Nottingham.
Ahmed, Sanjana
(2019)
Assessing the benefits of storage applied to energy communities.
PhD thesis, University of Nottingham.
Ahumada Sanhueza, Constanza
(2018)
Reduction of torsional vibrations due to electromechanical interaction in aircraft systems.
PhD thesis, University of Nottingham.
Aimakov, Nurkanat
(2021)
Elastic wave energy scattering and propagation in composite structures.
PhD thesis, University of Nottingham.
Ajam, Harith K.K.
(2019)
Effect of heating energy, steel fibres, bitumen types and ageing on the self-healing phenomena in hot mix asphalt.
PhD thesis, University of Nottingham.
Ajayi, Olorunfemi Michael
(2019)
Corrosion inhibition of mild steel in 15 wt% HCl solution by synthetic and green compounds.
PhD thesis, University of Nottingham.
Akdogan, Volkan
(2016)
Thermoelectric power generator for automotive applications.
PhD thesis, University of Nottingham.
Al Hanashi, Khalil
(2019)
Removal of carbon dioxide from high pressure natural gas by adsorption on activated carbons.
PhD thesis, University of Nottingham.
Al-Abedy, Hiydar Kireem Musraa
(2020)
Dislocation Density-Based Finite Element Models for Viscoplasticity and Creep of High-Temperature Materials.
PhD thesis, University of Nottingham.
Al-Ani, Wisam
(2020)
Numerical analysis of ground improvement using column-like elements.
PhD thesis, University of Nottingham.
Al-Atta, Ammar Jaber
(2018)
Supercritical water oxidation of hazardous waste: process enhancement and reactor design.
PhD thesis, University of Nottingham.
Al-Aufi, Yousuf Abdullah
(2018)
Vertical annular flow characteristics for air/silicone oil system.
PhD thesis, University of Nottingham.
Al-Badri, Mohammed
(2021)
Development of a mixer free doppler ultrasound fetal monitor.
PhD thesis, University of Nottingham.
Al-Behadili, Mustapha Abbas Ethaib
(2017)
On bubble rise dynamics in a continuum and pairwise interaction: an experimental and numerical study.
PhD thesis, University of Nottingham.
Al-Fadhli, Mohammed
(2017)
Design and evaluation of a novel soft active-vest for human back assistance.
PhD thesis, University of Nottingham.
Al-Juboori, Ossama Hussein Ali
(2019)
Conversion of carbon dioxide gas to hydrocarbon fuels by electrolysis in molten salts.
PhD thesis, University of Nottingham.
Al-Mansoori, Tariq Hussein Abees
(2018)
Encapsulated healing agents for asphalt self-healing.
PhD thesis, University of Nottingham.
Al-Mosawe, Doha
(2019)
Reliability analysis of deteriorated post-tensioned concrete bridge decks.
PhD thesis, University of Nottingham.
Al-Mosawe, Hasan
(2016)
Prediction of permanent deformation in asphalt mixtures.
PhD thesis, University of Nottingham.
Al-Shara, Nawar Kader Augla
(2018)
Splitting steam via eutectic molten hydroxide assisted electrolysis for hydrogen gas production.
PhD thesis, University of Nottingham.
Al-Thamir, Mohaimen Habeeb Makki
(2021)
Additive manufacturing of WC-Co cermets using composite powders.
PhD thesis, University of Nottingham.
Al-Timimy, Ahmed Abdul Al-Kareem Hussen
(2019)
Advancing the design and modelling processes for high performance electrical machines.
PhD thesis, University of Nottingham.
Al-hamdani, Kamaal
(2019)
Deposition of satellited Al-TiC powders for coating applications.
PhD thesis, University of Nottingham.
Al-jumaili, Omar Saad salih
(2018)
Investigation of friction stir welding of aluminium alloy and aluminium matrix composites.
PhD thesis, University of Nottingham.
Alabdullatief, Aasem
(2020)
An approach for low energy mosque building design in hot arid climate: a case for Saudi Arabia.
PhD thesis, University of Nottingham.
Alacash, Hamid Ahmed Awad
(2018)
Establish skid resistance thresholds for local authority roads in the UK using statistical models.
PhD thesis, University of Nottingham.
Albatati, Faisal Ali S.
(2015)
Investigation of environmentally friendly power generation systems for low-grade waste heat recovery.
PhD thesis, University of Nottingham.
Albazzaz, Shaima
(2020)
Understanding and minimising water vapour co-adsorption for activated carbons in post-combustion CO2 capture.
PhD thesis, University of Nottingham.
Alblalaihid, Khalid
(2016)
Active suspension structure for micro-scale probing systems.
PhD thesis, University of Nottingham.
Alegre Martínez, César
(2020)
A study of the solid and fluid mechanics of atherosclerotic plaques using numerical simulations.
PhD thesis, University of Nottingham.
Alenezi, Thamer
(2019)
Cold mix asphalt made with bitumen emulsion capsules.
PhD thesis, University of Nottingham.
Alfaqawi, Rami Mohammed S.
(2018)
Investigation into ageing and the effect of hydrated lime on mastics and mixture ageing.
PhD thesis, University of Nottingham.
Alghamdi, Abdulaziz
(2014)
Mechanical characterisation of novel polyethylene-based nanocomposites.
PhD thesis, University of Nottingham.
Algodi, Samer Jasim Mahmood
(2018)
Characterisation, modelling and tribological investigations of nano-structured TiC-based electrical discharge coatings.
PhD thesis, University of Nottingham.
Alharbi, Abdulrahman
(2014)
Investigation of sub-wet bulb temperature evaporative cooling system for cooling in buildings.
PhD thesis, University of Nottingham.
Ali, Jasim Mohammed
(2017)
Modelling the spatiotemporal change of urban heat islands and influencing parameters.
PhD thesis, University of Nottingham.
Ali, Sheikh Mohammod
(2013)
Ultrasonic and thermo-kinetic characterization of curing epoxy resin.
PhD thesis, University of Nottingham.
Aliyu, Attahir Murtala
(2017)
On-board health monitoring of power modules in inverters driving induction motors.
PhD thesis, University of Nottingham.
Aljubory, Ahmed Ibrahim Ahmed
(2019)
Assessment of environmental factor effects on fatigue and healing performance of asphalt mixtures.
PhD thesis, University of Nottingham.
Almuslmani, Bandar Saleh
(2010)
Estimation of Arabian rigid plate motion and strain rate accumulation within the Arabian plate using GPS measurements.
PhD thesis, University of Nottingham.
Alosaimi, Azzam
(2023)
Optimising the energy performance of the residential stock of the Kingdom of Saudi Arabia by retrofit measures.
PhD thesis, University of Nottingham.
Alsahlawi, Saad
(2018)
Development of a floating wave energy converting breakwater for gulf type marine environment.
PhD thesis, University of Nottingham.
Alshahrani, Abdullah
(2022)
Flexibility measures and energy management strategies for large-scale PV integration into grid system: a case study for Saudi Arabia.
PhD thesis, University of Nottingham.
Alshammari, Lubna
(2019)
Long-term peatland condition assessment via surface motion monitoring using the ISBAS DInSAR technique.
PhD thesis, University of Nottingham.
Alshkane, Younis Mustafa Ali
(2015)
Numerical modelling investigation of rock mass behaviour under gravity dams.
PhD thesis, University of Nottingham.
Altarawneh, Sanad
(2023)
Unravelling the underpinning mechanisms associated with the microwave treatment of electric arc furnace dust with polyvinyl chloride: an electromagnetic and kinetic investigation.
PhD thesis, University of Nottingham.
Altinozen, Ekrem
(2023)
Spatial warping techniques for unstructured transmission line modelling method.
PhD thesis, University of Nottingham.
Amankwah, Emmanuel K.
(2013)
A parallel hybrid modular multilevel converter for high voltage DC applications.
PhD thesis, University of Nottingham.
Ambalakatte, Ajith
(2023)
Investigating the feasibility of ammonia as a decarbonised energy vector for marine applications.
PhD thesis, University of Nottingham.
Ambrose, Stephen
(2015)
The rise of Taylor bubbles in vertical pipes.
PhD thesis, University of Nottingham.
Ammar, Muhammad
(2019)
Estimation and analysis of multi GNSS differential code biases using a hardware signal simulator.
PhD thesis, University of Nottingham.
Ampatzidis, Theofanis
(2019)
Acoustics and optimisation of vibration attenuation of composite structures through banded behaviour.
PhD thesis, University of Nottingham.
Anbari, Hossein
(2023)
Microwave-assisted in-situ catalytic upgrading of heavy oil.
PhD thesis, University of Nottingham.
Angel-Smith, Sarah Jane
(2018)
Characterisation of diesel injector deposits using advanced analytical techniques.
EngD thesis, University of Nottingham.
Ankrah, Archibald F.
(2020)
Heavy metal removal from water/wastewater using fly-ash derived zeolites.
PhD thesis, University of Nottingham.
Antrobus, Vicki Roselyn
(2019)
Natural language interfaces for vehicle navigation systems.
PhD thesis, University of Nottingham.
Antzoulatos, Nikolas
(2017)
Towards self-adaptable intelligent assembly systems.
PhD thesis, University of Nottingham.
Anwar, Saqib
(2013)
Modelling of abrasive waterjet milled footprints.
PhD thesis, University of Nottingham.
Anyanwu, Valentine E.
(2019)
Design and exploitation of cadaverine metabolic pathway for simple N-heterocyclic chemical production.
PhD thesis, University of Nottingham.
Apalowo, Rilwan Kayode
(2019)
Wave propagation and interaction with damage in periodic composite structures.
PhD thesis, University of Nottingham.
Arafat, Abul
(2022)
Development of yttrium phosphate based porous microspheres for radioembolisation therapy.
PhD thesis, University of Nottingham.
Arif, Bilal
(2016)
Real-time grid parameter estimation methods using model based predictive control for grid-connected converters.
PhD thesis, University of Nottingham.
Arifin, Davin
(2023)
Using electrostatic nonlinearities to enhance the performance of ring-based Coriolis vibratory gyroscopes.
PhD thesis, University of Nottingham.
Arjmand, Elaheh
(2016)
On-line quality monitoring and lifetime prediction of thick Al wire bonds using signals obtained from ultrasonic generator.
PhD thesis, University of Nottingham.
Arshad, Adeel
(2021)
Assessment of nanomaterials in enhancing the thermophysical properties of phase change materials for thermal management.
PhD thesis, University of Nottingham.
Arshad, Adeel
(2021)
Assessment of nanomaterials in enhancing the thermophysical properties of phase change materials for thermal management.
PhD thesis, University of Nottingham.
Arumugam, Puvaneswaran
(2013)
Design and modelling of permanent magnet machine's windings for fault-tolerant applications.
PhD thesis, University of Nottingham.
Askari, Meisam
(2017)
Metamaterial fabrication using combined multiphoton polymerization and optical trapping.
PhD thesis, University of Nottingham.
Astachov, Vladimir
(2018)
Tailoring the structure of nanomaterials formed by light-induced synthesis.
PhD thesis, University of Nottingham.
Atagher, Peter Tyev
(2019)
We can't stop cooking. Investigating the enablers for the uptake of improved cookstoves in Benue State, Nigeria.
PhD thesis, University of Nottingham.
Athab, Ahmed Dhahir
(2020)
Validating the SubSAR technique for buried feature detection using satelllite SAR data.
PhD thesis, University of Nottingham.
Atiyah, Hasanain Kareem
(2019)
Using black PMMA to investigate losses in fibre laser cutting.
PhD thesis, University of Nottingham.
Ayixiamuguli, Nueraimaiti
(2016)
Lignin degradation using lignolytic enzymes.
PhD thesis, University of Nottingham.
B
Ba, Weiming
(2022)
Modelling, analysis and control of tendon-driven continuum robots.
PhD thesis, University of Nottingham.
Badiee, Amir
(2016)
An examination of the response of ethylene-vinyl acetate film to changes in environmental conditions.
PhD thesis, University of Nottingham.
Bafarawa, Buhari Attahiru
(2015)
Structural characterisation of porous materials in relation to entrapment of non-wetting fluids.
PhD thesis, University of Nottingham.
Bagasi, Abdullah Abdulhameed
(2022)
Investigation of the ventilation and thermal performance of mashrabiya for residential buildings in the hot-humid climate of Saudi Arabia.
PhD thesis, University of Nottingham.
Bagheri, Meghdad
(2018)
Experimental investigation of the time- and rate-dependent behaviour of unsaturated clays.
PhD thesis, University of Nottingham.
Baharuddin, Mohd Hafiz
(2020)
Measurement and characterisation of stochastic fields.
PhD thesis, University of Nottingham.
Bai, Xiaoyi
(2018)
Mathematical modelling and stability analysis for grid-connected cascaded H-bridge converter.
PhD thesis, University of Nottingham.
Bailey, Sam Dennis
(2016)
A study of polyisobutylene and its derivatives at high temperatures.
EngD thesis, University of Nottingham.
Balaghi Enalou, Hossein
(2020)
Electric power transfer concept for improved performance of multi-spool turbofan jet engine.
PhD thesis, University of Nottingham.
Ballaji, Hattan Khaled Y.
(2021)
Smart textile based optical sensing for health care.
PhD thesis, University of Nottingham.
Bandele, Jeremiah Oluwatosin
(2016)
Extended free-space optical communications.
PhD thesis, University of Nottingham.
Bano, Saira
(2021)
Suspension high velocity oxy fuel thermal spraying for biomedical coatings.
PhD thesis, University of Nottingham.
Bao, Jianguang
(2021)
Use of X-ray microtomography and full-field image correlation tools for the thermomechanical analysis of high temperature material behaviours.
PhD thesis, University of Nottingham.
Barman, Kanika
(2016)
Development of dry film lubricants for highly loaded contacts.
PhD thesis, University of Nottingham.
Barrera Betanzos, Fernando
(2018)
Development of innovative techniques for the manufacture of bioresorbable composites intended as fracture fixation devices.
PhD thesis, University of Nottingham.
Basak, Shreeja
(2023)
The impact of process planning on cost and production losses in additive manufacturing.
PhD thesis, University of Nottingham.
Basile, Francesco
(2019)
Multi-frequency GPS/Galileo combinations for quick Precise Point Positioning in urban environments.
PhD thesis, University of Nottingham.
Basle, Mattias Pascal Fabien
(2020)
Development of an artificial metalloenzyme from a nicotinamide-dependent enzymatic scaffold.
PhD thesis, University of Nottingham.
Bassey, Uwem
(2023)
Remediation of typical Nigerian crude oil contaminated soils using microwave heating.
EngD thesis, University of Nottingham.
Basso, Alessio
(2018)
Explorative methods for turbulent flow control.
MPhil thesis, University of Nottingham.
Beard, Maria
(2018)
An exploration of the factors associated with paediatric burn injuries in rural and peri-urban Malawi.
PhD thesis, University of Nottingham.
Bech, Alexander
(2018)
Thermal analysis and fuel economy benefits of cylinder deactivation on a 1.0l spark ignition engine.
PhD thesis, University of Nottingham.
Bersch, Kevin
(2019)
Thermal optimisation of the stator vent design for a synchronous generator.
PhD thesis, University of Nottingham.
Bertola, Luca
(2017)
Aiding take-off and reducing civil aircraft weight using the electromagnetic catapult.
PhD thesis, University of Nottingham.
Bertolotti, Luc
(2022)
Machine learning-augmented turbulence models for the simulation of two-phase shear flows.
PhD thesis, University of Nottingham.
Bhuwal, Akash Singh
(2023)
Failure analysis and mechanical behaviors of metamaterials.
PhD thesis, University of Nottingham.
Bin Che Amat, Muhammad Asyran
(2017)
Assessment of long-term deformation in Johor, Malaysia using Global Positioning System (GPS) and Interferometric Synthetic Aperture Radar (InSAR).
PhD thesis, University of Nottingham.
Bin Shamsudin, Mohd Fazaulnizam
(2020)
Group behaviour of Extended HolloBolts (EHBs) in tension.
PhD thesis, University of Nottingham.
Bingley, R.M.
(1990)
Electronic theodolite intersection systems.
PhD thesis, University of Nottingham.
Birchall, Liesbeth
(2022)
Reactive inkjet of quantum dot-silicone composites.
PhD thesis, University of Nottingham.
Bisterov, Ivan
(2023)
Advancing electrochemical jet machining through process monitoring and control.
PhD thesis, University of Nottingham.
Blake, Charlotte
(2021)
Additive manufacturing of mitral annuloplasty devices.
PhD thesis, University of Nottingham.
Blankson, Marva Angela
(2013)
Corrosion inhibition in self-compacting concrete.
PhD thesis, University of Nottingham.
Blaxter, Laurence
(2015)
Non-invasive monitoring of peripheral perfusion: an exploration of non-invasive peripheral perfusion monitoring for applications in research & healthcare.
PhD thesis, University of Nottingham.
Blissett, Jonathan
(2019)
A wholistic motor design philosophy for electric motorcycles in motorsport.
PhD thesis, University of Nottingham.
Bointon, Patrick
(2020)
Mechanical design and dynamic performance characterisation for non-contact form measurement systems.
PhD thesis, University of Nottingham.
Bond, Michael David
(2013)
Multi-scale modelling of discontinuous carbon fibre reinforced composites.
PhD thesis, University of Nottingham.
Bonenberg, Lukasz Kosma
(2014)
Closely-coupled integration of Locata and GPS for engineering applications.
PhD thesis, University of Nottingham.
Bottomley, Jack S.
(2014)
Self-sensing permanent magnet servo motors.
PhD thesis, University of Nottingham.
Bowler, Alexander
(2023)
Ultrasonic measurements and machine learning methods to monitor industrial processes.
PhD thesis, University of Nottingham.
Bradbury, James A.
(2023)
Photonic textile sensing for sports and healthcare.
PhD thesis, University of Nottingham.
Braz de Sousa, Ana Letícia
(2020)
Preparation and characterisation of polymer microparticles with varying morphologies with application in drug delivery.
PhD thesis, University of Nottingham.
Bridge, Christopher P.
(2018)
Biomass co-firing to improve the burn-out of unreactive coals in pulverised fuel combustion.
EngD thesis, University of Nottingham.
Bristot, Andrea
(2018)
Application of the volume of fluid method with heat transfer to a two-shaft aero-engine bearing chamber.
PhD thesis, University of Nottingham.
Brown, Helen C.
(2016)
Extractables and leachables from poly-ε-caprolactone/phosphate based glass composites.
MPhil thesis, University of Nottingham.
Buckley, Gary
(2017)
Fault detection and tolerance of electrical machines in automotive applications.
PhD thesis, University of Nottingham.
Bugaje, Bilal
(2022)
Development of a system-dynamics-based methodology for comprehensive community energy planning.
PhD thesis, University of Nottingham.
Bunce, Michael P.
(2022)
The impact of in-cylinder charge motion on lean limit extension and in-pre-chamber mixture preparation in a homogeneous ultra-lean engine.
PhD thesis, University of Nottingham.
Burgos Mellado, Claudio Danilo
(2019)
Control strategies for improving power quality and PLL stability evaluation in microgrids.
PhD thesis, University of Nottingham.
Burn, David T.
(2016)
Long discontinuous carbon fibre/polypropylene composites for high volume automotive applications.
PhD thesis, University of Nottingham.
Butler, Matthew J.
(2018)
Motion artefact reduction for reflection-mode photoplethysmography.
PhD thesis, University of Nottingham.
Butterworth, Jessica Helen
(2017)
Mid-infrared transmitting Ge-Sb-Se chalcogenide glass fibres: for potential use in medical diagnostics.
PhD thesis, University of Nottingham.
Buttress, Adam James
(2013)
Physicochemical behaviour of artificial lime stabilised sulfate bearing cohesive soils.
PhD thesis, University of Nottingham.
C
Cabrera Duran, Manuela
(2023)
Analysis of the Extended Hollo-Bolt component in concrete-filled steel connections.
PhD thesis, University of Nottingham.
Cacciapuoti, Bianca
(2018)
The role of miniature specimen creep tests in power plant life management.
PhD thesis, University of Nottingham.
Cader, Hatim K.
(2019)
Inkjet printing of solid oral dosage forms.
PhD thesis, University of Nottingham.
Cadot, Guillaume Bastien Jérémy
(2017)
Experimental and numerical investigations of diamond and
related materials controlled-depth machining using pulsed laser ablation.
PhD thesis, University of Nottingham.
Cai, Wei
(2013)
Discrete element modelling of constant strain rate and creep tests on a graded asphalt mixture.
PhD thesis, University of Nottingham.
Calvert, Gareth Samuel
(2021)
A multiple defect approach to bridge life cycle modelling.
PhD thesis, University of Nottingham.
Calvo Carrascal, Miguel Angel
(2018)
Sustainable manufacturing of next generation building materials using microwave energy.
PhD thesis, University of Nottingham.
Camacho Arreguin, Josue Israel
(2022)
Design and modelling of a reconfigurable parallel kinematic machine with customisable leg layout for enhanced performance.
PhD thesis, University of Nottingham.
Camboim Salatino Tubelo, Renata
(2016)
The application of the 'fabric first' approach to improve thermal comfort and energy efficiency in affordable housing in Southern Brazil.
PhD thesis, University of Nottingham.
Campanelli, Carlo
(2019)
Processing of high-performance fluoropolymers by additive manufacturing.
PhD thesis, University of Nottingham.
Cantero Chinchilla, Sergio
(2020)
Optimal methodologies for ultrasonic guided-wave based structural health monitoring.
PhD thesis, University of Nottingham.
Caramazana Gonzalez, Pablo
(2017)
The sustainable engineering of continuous hydrothermal synthesis.
PhD thesis, University of Nottingham.
Carrasco-Hernández, Francisco
(2017)
Numerical simulation of blunt thoracic trauma followed by aortic rupture.
PhD thesis, University of Nottingham.
Carroll, Seàn P.
(2013)
Crowd-induced lateral bridge vibration.
PhD thesis, University of Nottingham.
Carvajal-Munoz, Juan Sebastian
(2022)
Multi-scale assessment of the performance-related effects of hydrated lime replacement on SMA mixtures.
PhD thesis, University of Nottingham.
Cassioli, Maria Letizia
(2023)
Encapsulation of metal complex into apoferritin for drug delivery and prodrug activation.
PhD thesis, University of Nottingham.
Catalucci, Sofia
(2021)
Automated assessment of measurement performance in optical coordinate metrology.
PhD thesis, University of Nottingham.
Catchpole-Smith, Sam
(2020)
Laser powder bed fusion of lattice structures for thermomechanical applications.
PhD thesis, University of Nottingham.
Catucci, Daniele
(2023)
Analytical derivation and numerical test of novel scaling laws for air-water flows.
PhD thesis, University of Nottingham.
Chacko Salem, Stanley
(2016)
Methodologies for evaluation of high strain rate properties of composite material constituents.
PhD thesis, University of Nottingham.
Chadha, Sunil
(2021)
Numerical modelling of suspension high velocity oxy fuel (S-HVOF) thermal spray.
PhD thesis, University of Nottingham.
Chae, Jung Hoon
(2014)
Supercapacitors with neutral aqueous electrolytes.
PhD thesis, University of Nottingham.
Chalk, Kieran
(2013)
Weld consumables and PWHT for P92 power plant steel.
PhD thesis, University of Nottingham.
Charles, Rebecca
(2014)
Using cognitive artefacts to aid decision-making in railway signalling operations.
PhD thesis, University of Nottingham.
Chen, An-Qi
(2022)
Micro mechanism of fatigue cracking in asphalt concrete.
PhD thesis, University of Nottingham.
Chen, Han-Mei
(2014)
Physical model tests and numerical simulation for assessing the stability of tunnels.
PhD thesis, University of Nottingham.
Chen, Linglin
(2020)
Control of dual active bridge for DC distribution systems on more electric aircrafts.
PhD thesis, University of Nottingham.
Chen, Rui
(2013)
Novel particle sizing techniques.
PhD thesis, University of Nottingham.
Chen, Shuai
(2016)
Fabric forming simulation and process optimisation for composites.
PhD thesis, University of Nottingham.
Chen, Siwen
(2022)
High speed in-process defect detection in metal additive manufacturing.
MPhil thesis, University of Nottingham.
Chen, Ye
(2017)
Computational investigation of microstrip antennas and couplers.
MRes thesis, University of Nottingham.
Chen, Yipei
(2018)
Synthesis of MOFs for carbon capture application.
PhD thesis, University of Nottingham.
Chen, Yuzheng
(2023)
High speed green-taxiing motor-generator drive system for mild hybridization of turboprop aircraft.
PhD thesis, University of Nottingham.
Chen, Ziwei
(2018)
A micro trigeneration system with scroll-based organic Rankine cycle and membrane-based liquid desiccant cooling.
PhD thesis, University of Nottingham.
Chiarelli, Andrea
(2016)
Energy harvesting pavements using air convection.
PhD thesis, University of Nottingham.
Choong, Gabriel Y. H.
(2014)
A study of melt-compounded nanocomposites of polycarbonate and carbon nanotubes in the melt and solid states.
PhD thesis, University of Nottingham.
Chowdhury, MD Shajjad
(2017)
A multilevel converter with a floating bridge for open-ended winding motor drive application.
PhD thesis, University of Nottingham.
Christelow, Samuel J.J.
(2021)
A comparison of GNSS reflectometry soil moisture detection techniques.
MRes thesis, University of Nottingham.
Chu, Xuanxuan
(2023)
Road and Railway Foundation Response to Moisture Content and Drainage.
PhD thesis, University of Nottingham.
Chua, Chung Han
(2022)
Investigation of upper limb prosthesis functionality using quantitative design tools.
PhD thesis, University of Nottingham.
Ciampani, Victoria
(2019)
Development and characterisation of optogenetic tools for non-invasive control of cellular functions in epithelia.
PhD thesis, University of Nottingham.
Clark, Ian
(2018)
Continuous synthesis and characterisation of layered double hydroxide nanomaterials for their application for dye wastewater remediation.
PhD thesis, University of Nottingham.
Clark, John William Gordon
(2015)
Investigating chemical and microstructural evolution at dissimilar metal welds.
EngD thesis, University of Nottingham.
Colechin, Michael John Farrelly
(1996)
Heat transfer and fuel transport in the intake port of a spark ignition engine.
PhD thesis, University of Nottingham.
Corbridge, David Michael
(2018)
Compression moulding of hybrid carbon fibre composites for structural applications.
PhD thesis, University of Nottingham.
Cormier, Luis
(2023)
Analysis of the Earth-Moon Lagrange points for improving GNSS performance in lunar space.
MRes thesis, University of Nottingham.
Cortellino, Francesco
(2015)
Experimental and numerical investigation of small punch creep test.
PhD thesis, University of Nottingham.
Cossutta, Matteo
(2016)
Life cycle analysis of graphene in a supercapacitor application.
PhD thesis, University of Nottingham.
Coulson, Jethro
(2016)
Spatially resolved acoustic spectroscopy (SRAS) technology development.
EngD thesis, University of Nottingham.
Craig, Oliver
(2019)
Conformable fixture systems with flexure pins for improved workpiece holding.
PhD thesis, University of Nottingham.
Crossland, Ayse Leyla
(2019)
The investigation of interaction mechanisms with in-vehicle infotainment systems (IVIS).
PhD thesis, University of Nottingham.
Crowley, Jane
(2023)
Spatial frequency domain imaging towards improved detection of gastrointestinal cancers.
PhD thesis, University of Nottingham.
Crowther, Shamal Mena
(2018)
The development of a fast response measurement system for use in turbomachinery applications.
EngD thesis, University of Nottingham.
Crudge, Sally Jane
(2020)
Towards an automated approach for monitoring vegetation green-up dynamics using vehicle dashcams in urban environments.
MRes thesis, University of Nottingham.
Cuciniello, Giacomo
(2019)
Study of the effect of laboratory-simulated ageing on the damage resistance of polymer-modified bitumens in intermediate climates.
PhD thesis, University of Nottingham.
Cuzzucoli Crucitti, Valentina
(2021)
Design, synthesis and application of a library of novel bioactive surfactants as a tool for the production of functionalised microparticles.
PhD thesis, University of Nottingham.
D
D'Angelo, Giacomo
(2018)
Bitumen stabilised ballast: a novel track-bed solution towards a more sustainable railway.
PhD thesis, University of Nottingham.
Dafyak, Longtong
(2023)
Hydrodynamics of viscous slug flow in inclined pipes.
PhD thesis, University of Nottingham.
Dai, Jingru
(2019)
Process and reliability of die attachment by time-reduced sintering of nanosilver film.
PhD thesis, University of Nottingham.
Daley, Patrick James
(2019)
An optimised advanced ash fusion test for power generators.
EngD thesis, University of Nottingham.
Dalla Valle, Paola
(2015)
Reliability in pavement design.
PhD thesis, University of Nottingham.
Daure, Jaimie
(2016)
An investigation into the tribology and corrosion barrier performance of thin multilayer PVD films.
PhD thesis, University of Nottingham.
Davies, Michael I.
(2013)
High temperature nanoindentation characterisation of P91 and P92 steel.
PhD thesis, University of Nottingham.
Daxini, Rajiv
(2024)
Empirical modelling of the solar spectral influence on photovoltaic devices for improved performance forecasting.
PhD thesis, University of Nottingham.
De Gaetano, Daniele
(2022)
On multi-phase machines and current harmonic injection for torque capability improvement.
PhD thesis, University of Nottingham.
De Silva, Wasana
(2014)
Performing place: natural landscape, cultural place, performances of Sri Lankan traditional settlements: Kandy and Lankathilaka.
PhD thesis, University of Nottingham.
Deavin, Oliver
(2018)
Thermodynamic tuning of lithium borohydride using various metallic sources.
PhD thesis, University of Nottingham.
Dedenbach, Johannes
(2016)
Low cost, high integrity plasmatron joining for automotive body in white manufacture.
PhD thesis, University of Nottingham.
Deep, Pawan
(2021)
Continuous structural evaluation of rigid pavements(JCP).
PhD thesis, University of Nottingham.
Del Guercio, Giuseppe
(2023)
Hot cracking elimination strategies in aluminium alloys fabricated by PBF-LB/M.
PhD thesis, University of Nottingham.
Deng, Ei Leen
(2016)
Controlled ring-opening polymerisation using microwave heating.
PhD thesis, University of Nottingham.
Derelizade, Kerem
(2023)
Thermal spraying of novel composite coating compositions for wear resistance applications.
PhD thesis, University of Nottingham.
Dewi, Shinta Rosalia
(2023)
Extraction of bioactive compounds from cacao pod husks (CPH).
PhD thesis, University of Nottingham.
Di Liberto, Gianluca
(2017)
Mechanisms of soot transfer to oil of an HPCR diesel engine.
PhD thesis, University of Nottingham.
Di Nardo, Mauro
(2017)
Design of high speed synchronous reluctance machine.
PhD thesis, University of Nottingham.
Diaz, Matias
(2017)
Control of the modular multilevel matrix converter for wind energy conversion systems.
PhD thesis, University of Nottingham.
Dibia, B.I.
(2019)
Implementation and application of solar energy in Nigeria.
PhD thesis, University of Nottingham.
Ding, Siwen
(2017)
Investigation on thermal barrier coating and thermal behaviour at high temperature.
PhD thesis, University of Nottingham.
Ding, Yate
(2014)
Investigation of high capacity heat energy storage for building applications.
PhD thesis, University of Nottingham.
Disley, Zoe B.C.
(2018)
Towards the bioproduction of methyl methacrylate: solving the problem of product toxicity.
PhD thesis, University of Nottingham.
Djabatey, Charles
(2023)
Experimenting and modelling the role of road surface detritus in the formation of potholes.
PhD thesis, University of Nottingham.
Donani, Yao-Martin
(2014)
Developing a framework for sustainable manufacturing of technologies in Africa focusing on Ghana.
PhD thesis, University of Nottingham.
Dong, Xin
(2016)
Design of a continuum robot for in-situ repair of aero engine.
PhD thesis, University of Nottingham.
Donoso Merlet, Felipe Octavio
(2022)
Hybrid modular multilevel converter (MMC) applications under over-modulation.
PhD thesis, University of Nottingham.
Douglas, Timothy
(2019)
Applications of catalytic C-N bond formation from diazo compounds.
PhD thesis, University of Nottingham.
Dowthwaite, Liz
(2018)
Crowdfunding webcomics: the role of incentives and reciprocity in monetising free content.
PhD thesis, University of Nottingham.
Dsouza, Serena Karen
(2018)
Asset management of offshore oil and gas installations.
PhD thesis, University of Nottingham.
Dunford, Alan
(2013)
Friction and the texture of aggregate particles used in the road surface course.
PhD thesis, University of Nottingham.
Dusek, Jiri
(2017)
Machines with non-conventional topologies for more electric applications.
PhD thesis, University of Nottingham.
Duwahir, Zahras Mohamed
(2016)
Capturing CO2 from an integrated steel mill: a techno-economic analysis through process modelling.
EngD thesis, University of Nottingham.
Dyson, Charles N.C.
(2019)
Interpretation of small specimen creep test and recommendations on standardisation of impression creep test method.
EngD thesis, University of Nottingham.
Dély, Alexandre
(2019)
Computational strategies for impedance boundary condition integral equations in frequency and time domains.
PhD thesis, University of Nottingham.
de Araújo Vieira, Andre
(2020)
Strengthening of existing reinforced concrete structures against progressive collapse.
PhD thesis, University of Nottingham.
de Bono, John Patrick
(2013)
Discrete element modeling of cemented sand and particle crushing at high pressures.
PhD thesis, University of Nottingham.
de Souza Lamas, Jose Raphael
(2018)
An investigation into a driver-to-driver communication device to manage and improve the interaction between drivers.
PhD thesis, University of Nottingham.
E
Eastwood, Joe
(2023)
Machine learning for the automation and optimisation of optical coordinate measurement.
PhD thesis, University of Nottingham.
Echeta, Ifeanyichukwu
(2023)
Analysis of defects in additively manufactured lattice structures.
PhD thesis, University of Nottingham.
Edwards, Tamsyn
(2013)
Human performance in air traffic control.
PhD thesis, University of Nottingham.
Eftekhar Khansari, Tiva
(2019)
Research into the optimisation of spectral quality to improve plant growth and development towards LED lighting and closed loop control for horticulture.
PhD thesis, University of Nottingham.
Ehtiwesh, Amin
(2023)
A Simulink/Simscape dynamic modelling study on shifting the
power output profile of a direct steam generation solar power
system with steam/water storage.
PhD thesis, University of Nottingham.
Eihab Abdelghaffar Elsharkawy, Heba
(2013)
Home energy use, lifestyle, and behaviour: a community energy saving programme (CESP) survey in Aspley, Nottingham.
PhD thesis, University of Nottingham.
Ekpe, Ngozi Chinwe
(2017)
Novel co-precipitated oxygen carriers for chemical looping combustion of gaseous fuel.
PhD thesis, University of Nottingham.
El-Nounu, AbdulRahman
(2018)
Redesign methodology for cost effective assembly of aerospace structures.
EngD thesis, University of Nottingham.
Elaiab, Fatima M.
(2014)
Thermal comfort investigation of multi-storey residential buildings in Mediterranean climate with reference to Darnah, Libya.
PhD thesis, University of Nottingham.
Elayeb, Salahedin
(2019)
Improved operation and design of modular multi-level converters through harmonic injection.
PhD thesis, University of Nottingham.
Elbasuney, Sherif
(2013)
Enhanced flame retardant polymer nanocomposites.
PhD thesis, University of Nottingham.
Elfaki, Hind Omer Elsheikh
(2016)
Hydrogen production through sorption-enhanced steam reforming of ethanol using CaO-based sorbent mixed with iron oxide catalyst.
PhD thesis, University of Nottingham.
Elkalsh, Ahmed
(2017)
Coupled electro-thermal transmission line modelling (TLM) method.
PhD thesis, University of Nottingham.
Elmadih, Waiel
(2020)
Additively manufactured lattice structures for vibration attenuation.
PhD thesis, University of Nottingham.
Elmaghrbi, Mohamed S.
(2019)
Modelling the effects of rotation and tides on dense ocean currents.
PhD thesis, University of Nottingham.
Elmas, Zeynep Günsu
(2013)
Exploiting new GNSS signals to monitor, model and mitigate the ionospheric effects in GNSS.
PhD thesis, University of Nottingham.
Elmer, Theo
(2015)
A novel SOFC tri-generation system for building applications.
PhD thesis, University of Nottingham.
Elmrabet, Nabila Mustafa
(2017)
Corrosion control of magnesium for stent applications.
PhD thesis, University of Nottingham.
Elnasri, Mahmoud Masoud Hamza
(2015)
From binder to mixture: experimental programme on permanent deformation behaviour.
PhD thesis, University of Nottingham.
Eltaweel, Ahmad
(2020)
Innovation of louvre daylighting system via using parametric design approach to enhance the daylight uniformity and stability in the deep-plan buildings.
PhD thesis, University of Nottingham.
Elvis, John
(2019)
Centrifuge and analytical modelling of offshore wind turbine monopile foundations.
PhD thesis, University of Nottingham.
Encerrado Flores, Ana L.
(2022)
Development of biomaterial applications for the investigation of the influence of dynamic mechanical cues and matrix apparent stiffness on the behaviour of contractile cells.
PhD thesis, University of Nottingham.
Erdody, Sandor
(2022)
Development of optical fibre sensors for real time measurements of nutrients in water.
PhD thesis, University of Nottingham.
Escobar-Galindo, C. Manuel
(2023)
Ergonomics in laparoscopic surgery: a work system analysis to reduce work-related musculoskeletal disorders across surgeons in Peruvian hospitals.
PhD thesis, University of Nottingham.
Escrig, Josep
(2017)
Influence of geometrical parameters on gas-liquid intermittent flows.
PhD thesis, University of Nottingham.
Eshtaya, Majd
(2016)
Towards sustainable production of renewable chemicals from lignin.
PhD thesis, University of Nottingham.
Evangelista Barreiros, Maria Inês
(2023)
Formulation strategies for the 3D extrusion printing of tablets containing a poorly soluble drug.
PhD thesis, University of Nottingham.
Evans, Anthony David
(2018)
Hybrid carbon fibre architectures for high performance, high volume applications.
PhD thesis, University of Nottingham.
Evans, Hywel F.J.
(2016)
Construction material classification using multi-spectral terrestrial laser scanning.
PhD thesis, University of Nottingham.
Evans, John Lee
(2018)
Corona discharge and arcing around wires under the influence of high electric fields.
PhD thesis, University of Nottingham.
Evans, Liam
(2013)
Experience-based decision support methodology for manufacturing technology selection: a fuzzy-decision-tree mining approach.
PhD thesis, University of Nottingham.
Everton, Sarah
(2018)
Ensuring the quality of components produced by metal additive manufacturing using laser generated ultrasound.
EngD thesis, University of Nottingham.
F
Falaye, Adewale
(2023)
Data mining and spatial analysis of Twitter as a resource for assessing UK water pollution.
MRes thesis, University of Nottingham.
Fallows, Daniel James Alfred
(2022)
Exciterless solutions for medium-power wound-field synchronous generators.
PhD thesis, University of Nottingham.
Fang, Yuanrong
(2019)
Assessing the optical properties of chalcogenide glasses and fibres: towards the development of new light sources.
PhD thesis, University of Nottingham.
Fanicchia, Francesco
(2018)
Investigation of combustion flame spray as in-situ repair technology for thermal barrier coatings.
PhD thesis, University of Nottingham.
Farayibi, Peter Kayode
(2014)
Laser cladding of Ti-6Al-4V with carbide and boride reinforcements using wire and powder feedstock.
PhD thesis, University of Nottingham.
Fares, Ahmed Mohamed
(2019)
Novel approaches to modular multiport DC power systems.
PhD thesis, University of Nottingham.
Farhan, Ahmed Hilal
(2016)
Characterization of rubberized cement-stabilized roadbase mixtures.
PhD thesis, University of Nottingham.
Farooqi, Aaisha Tasneem
(2016)
Methods for the investigation of work and human errors in rail engineering contexts.
PhD thesis, University of Nottingham.
Farthing, Sarah
(2021)
Hydrothermal carbonisation of digestate: an investigation into the technical design, economic feasibility and future potential of the process.
PhD thesis, University of Nottingham.
Fayyaz, Ahad
(2023)
Predictive models for gas-liquid two phase flows: investigating dependence on liquid phase viscosity.
PhD thesis, University of Nottingham.
Fayyaz, Asad
(2018)
Performance and robustness characterisation of SiC power MOSFETs.
PhD thesis, University of Nottingham.
Fecarotti, Claudia
(2018)
Modelling resilient railway systems.
PhD thesis, University of Nottingham.
Felfel, Reda
(2013)
Manufacture and characterisation of bioresorbable fibre reinforced composite rods and screws for bone fracture fixation applications.
PhD thesis, University of Nottingham.
Feng, Yixue
(2016)
DC fault ride through operation of a full-bridge MMC converter.
PhD thesis, University of Nottingham.
Fernandes Arruebarrena, Vanessa Auxiliadora
(2016)
Manifestations of the Mullins effect in filled elastomers.
PhD thesis, University of Nottingham.
Fernholz, Olga
(2018)
Innovating for today while innovating for tomorrow: a test of innovation ambidexterity theory in a leading technology company.
PhD thesis, University of Nottingham.
Fisher, Oliver J.
(2020)
Intelligent resource use in process manufacturing.
PhD thesis, University of Nottingham.
Flanagan, Louis
(2022)
High-powered electric motorcycle integrated performance studies.
PhD thesis, University of Nottingham.
Ford, Candice
(2023)
Enzymatic alternatives to permanent hair straightening methods.
PhD thesis, University of Nottingham.
Frank, Owajionyi L.
(2014)
Exploring a best practice approach to operability and maintainability of low carbon buildings in the UK.
PhD thesis, University of Nottingham.
Franza, Andrea
(2017)
Tunnelling and its effects on piles and piled structures.
PhD thesis, University of Nottingham.
Froggatt, Thomas
(2017)
Recycled railway corridors: an urban design perspective.
PhD thesis, University of Nottingham.
Fry, Christopher
(2013)
Development of magnesium-based multilayer PVD coatings for hydrogen storage applications.
PhD thesis, University of Nottingham.
Fu, Rong
(2017)
An investigation of magnetic nanofluids for various thermal applications.
PhD thesis, University of Nottingham.
Fu, Yu
(2014)
Investigation of solar assisted heat pump system integrated with high-rise residential buildings.
PhD thesis, University of Nottingham.
Fuentes Dominguez, Rafael
(2018)
Metal nanoparticles as nano-sized opto-acoustic transducers.
PhD thesis, University of Nottingham.
G
Gabrecht, Katharina M.
(2016)
Human factors of semi-autonomous robots for urban search and rescue.
PhD thesis, University of Nottingham.
Gadsby, Brett
(2023)
Endotracheal tube placement with fibre optic sensing.
PhD thesis, University of Nottingham.
Galassini, Alessandro
(2018)
Distributed speed control for multi-three-phase motors with enhanced power sharing capabilities.
PhD thesis, University of Nottingham.
Galea, Michael
(2013)
High performance, direct drive machines for aerospace applications.
PhD thesis, University of Nottingham.
Ganesan, Sathiyapriya
(2021)
Optical characterisation of Steatoda paykulliana spider dragline silk.
MSc(Res) thesis, University of Nottingham.
Ganjavi, Amin
(2019)
Hybrid substations for low voltage distribution networks.
PhD thesis, University of Nottingham.
Gao, Fei
(2016)
Decentralised control and stability analysis of a multi-generator based electrical power system for more electric aircraft.
PhD thesis, University of Nottingham.
Gao, Xinning
(2022)
Model order reduction for electromagnetic design in power electronics.
PhD thesis, University of Nottingham.
Gao, Yang
(2017)
Robust cooperative positioning using DGPS and UWB for V2X applications.
PhD thesis, Nottingham Geospatial Institute, University of Nottingham.
Gao, Yuan
(2022)
Application of search algorithms and machine learning on aircraft electrical drive systems: design, optimization and control.
PhD thesis, University of Nottingham.
Garcia Hernandez, Alfonso C.
(2019)
Self–sealing hot isostatic pressing–diffusion bonding of titanium for near net shape manufacture.
MPhil thesis, University of Nottingham.
García, Susana
(2010)
Experimental and simulation studies of iron oxides for geochemical fixation of CO2-SO2 gas mixtures.
PhD thesis, University of Nottingham.
García Fernández, Luis Eduardo
(2019)
Co-combustion of coal and biomass in a fluidised bed reactor.
PhD thesis, University of Nottingham.
Garduno Jimenez, Andrea Lorena
(2021)
Analysis and behaviour of bioactive pollutants in wastewater and reuse for irrigation: addressing country specific issues in Mexico and the UK.
PhD thesis, University of Nottingham.
Garibaldi, Michele
(2018)
Laser additive manufacturing of soft magnetic cores for rotating electrical machinery: materials development and part design.
PhD thesis, University of Nottingham.
Gaskin, Joshua
(2013)
On bitumen microstructure and the effects of crack healing.
PhD thesis, University of Nottingham.
Gasper, Alexander
(2019)
Spatter and powder evolution in laser powder bed fusion of Nickel-based superalloys.
PhD thesis, University of Nottingham.
Gatea, Shakir Madhloom
(2017)
Experimental and numerical investigation of formability and ductile fracture in incremental sheet forming.
PhD thesis, University of Nottingham.
Gavalda Diaz, Oriol
(2018)
On understanding the material removal mechanism when cutting Ceramic Matrix Composites (CMCs).
PhD thesis, University of Nottingham.
Gaviria Arcila, Dafne
(2020)
Modelling droplet heat and mass transfer in aero-engine bearing chambers.
PhD thesis, University of Nottingham.
Gayton, George
(2023)
Determining uncertainty in the functional quantities of fringe projection.
PhD thesis, University of Nottingham.
Gee, David C.
(2021)
The utilization of Sentinel-1 and intermittent SBAS DInSAR for enhanced deformation monitoring of geohazards.
PhD thesis, University of Nottingham.
Gennari, Gabriele
(2023)
A CFD methodology for mass transfer of soluble species in incompressible two-phase flows: modelling and applications.
PhD thesis, University of Nottingham.
Gherman, A.L.
(2018)
Investigation into the effect of materials microstructure and properties on micro-cutting precision.
PhD thesis, University of Nottingham.
Ghozzi, Salem Saleh
(2017)
Experimental investigation of a Diaphragm FPSE design using a novel edge welded bellows-displacer assembly.
PhD thesis, University of Nottingham.
Giancontieri, Gaspare
(2020)
Improving the rheometry of heterogeneous bituminous binders through experimental and numerical procedures.
PhD thesis, University of Nottingham.
Gianluca, De Bonis
(2019)
Development of a smart thyristor valve for HVDC transmission.
PhD thesis, University of Nottingham.
Giannoukos, Konstantinos
(2016)
Micro-structural analysis of time-variant evolution in pore geometry of cement materials during carbonation.
PhD thesis, University of Nottingham.
Gibbs, Albert Oswald
(2023)
Orientation control during 2D-3D composite preforming.
PhD thesis, University of Nottingham.
Gilani, Negar
(2023)
Drop-on-demand metal additive manufacturing from droplet formation to 3D structures.
PhD thesis, University of Nottingham.
Gilbert, David Jonathan
(2017)
Laser process optimisation for in-situ repair of aero-engine components.
EngD thesis, University of Nottingham.
Gill, Andrew
(2017)
The development of activated carbon from biomass precursors.
EngD thesis, University of Nottingham.
Giyani, Baker
(2023)
Microwave processing of ores.
PhD thesis, University of Nottingham.
Goh, Chin Kung
(2018)
Thermal management of an advanced aircraft actuation system.
MPhil thesis, University of Nottingham.
Gomez, David
(2019)
Fibre optic humidity and pH sensing for healthcare and sports applications.
PhD thesis, University of Nottingham.
Gomez Moreno, Carlos Alberto
(2022)
Applications of coherence scanning interferometry in additive manufacturing.
PhD thesis, University of Nottingham.
Gommer, Frank
(2013)
Stochastic modelling of textile structures for resin flow analysis.
PhD thesis, University of Nottingham.
Gonçalves Lobato de Almeida, Maria Teresa
(2021)
Design and fabrication of a device for three-dimensional neuronal development.
PhD thesis, University of Nottingham.
Graham, Shalini L.
(2015)
Degradation of biomass fuels during long term storage in indoor and outdoor environments.
EngD thesis, University of Nottingham.
Grazziotin, Pablo Colossi
(2016)
CityZoom UP (Urban Pollution): a computational tool for the fast generation and setup of urban scenarios for CFD and dispersion modelling simulation.
PhD thesis, University of Nottingham.
Grey, James F.E.
(2019)
Building an ex vivo model of breast cancer lung metastasis.
PhD thesis, University of Nottingham.
Griffin, Joseph W.
(2015)
Influences of drive torque distribution on road vehicle handling and efficiency.
PhD thesis, University of Nottingham.
Grossegger, Daniel
(2019)
The self-healing mechanism of macro cracks in asphalt mortar and its influencing factors.
PhD thesis, University of Nottingham.
Groth, Jan-Hendrik
(2023)
The application of stochastic design strategies to primitive and complex shapes.
PhD thesis, University of Nottingham.
Gullane, Alex
(2023)
Process design for high throughput Laser Powder Bed Fusion.
PhD thesis, University of Nottingham.
Gungordu, Baris
(2022)
Structural and fluidic investigation of piezoelectric synthetic jet actuators for performance enhancements.
PhD thesis, University of Nottingham.
Guo, Kai
(2021)
Ionospheric scintillation sensitive GNSS tracking error models and mitigation approaches.
PhD thesis, University of Nottingham.
Gupta, Alok
(2023)
Exploring property-structure-performance relationship for additive manufactured Ti-6Al-4V alloy through experimental studies.
PhD thesis, University of Nottingham.
Gurpinar, Emre
(2017)
Wide-bandgap semiconductor based power converters for renewable energy systems.
PhD thesis, University of Nottingham.
Gómez de León, Ana Berenice
(2022)
Innovative methodology for the assessment of thermal comfort and climate resilience in social housing in Coahuila, Mexico.
PhD thesis, University of Nottingham.
Güleç, Fatih
(2020)
Demonstrating the applicability of chemical looping combustion for fluid catalytic cracking unit as a novel CO2 capture technology.
PhD thesis, University of Nottingham.
H
Habboub, Mohammed
(2019)
A multiple algorithm approach to the analysis of GNSS time series for detecting anomalous behaviours, geohazards and meteorological events.
PhD thesis, University of Nottingham.
Hadri, Omar
(2022)
Asset management of ageing nuclear power plant systems.
PhD thesis, University of Nottingham.
Haidar, Raf
(1995)
A computational evaluation of the passenger crash position in civil aircraft.
PhD thesis, University of Nottingham.
Haji, Twana Kamal
(2017)
Evaluating the effects of tunnel construction on buildings.
PhD thesis, University of Nottingham.
Haji Abdul Karim, Roslinah
(2015)
Foamed bitumen stabilised sandstone aggregates.
PhD thesis, University of Nottingham.
Haji Adenan, Rozia
(2018)
Fostering culture resilience in housing for low-income earners.
PhD thesis, University of Nottingham.
Hall, Callum
(2016)
The potential for short term deployment of carbon dioxide utiltisation technology in the European steel industry.
EngD thesis, University of Nottingham.
Hamid, Malathe
(2020)
Architecture, place and identity: An exploration through an interpretive pattern language tool. A case study of Khartoum’s City Centre (KCC) - Sudan.
PhD thesis, University of Nottingham.
Hamidi, Nor Hanimah
(2013)
Enzymatic depolymerization of lignin by laccases.
PhD thesis, University of Nottingham.
Hamilton, Joel A.W.
(2017)
Investigation into discontinuous low temperature waste heat utilisation from a renewable power plant in rural India for absorption refrigeration.
PhD thesis, University of Nottingham.
Hanby, Benjamin, V. T.
(2019)
Magnetron sputtered thin films and composites for automotive and aerospace electrical insulation.
PhD thesis, University of Nottingham.
Hare, Chrisminder
(2017)
Designing for naturalistic decision-making.
PhD thesis, University of Nottingham.
Hargreaves, George William
(2017)
Efficient polyester resin synthesis using microwave heating with scale-up from 50 mL to 5 L.
PhD thesis, University of Nottingham.
Harikumaran, Jayakrishnan
(2022)
Design of high reliability power converters for aerospace applications.
PhD thesis, University of Nottingham.
Harrington, Kyle
(2019)
Decision making within missing person incidents.
PhD thesis, University of Nottingham.
Harvey, John
(2016)
An economic anthropology of computer-mediated non-monetary exchange in England.
PhD thesis, University of Nottingham.
Hasan, Ahmed Falh
(2016)
Modelling of tool wear and metal flow behaviour in friction stir welding (FSW).
PhD thesis, University of Nottingham.
Hasan, Muayad Mohammed
(2018)
Enhanced recovery of heavy oil using a catalytic process.
PhD thesis, University of Nottingham.
Hashemzadeh, Majid
(2014)
Investigations into fibre laser cutting.
PhD thesis, University of Nottingham.
Hashmi, Anas
(2017)
Differential ultrasonic calorimeter for accurate measurement of thermal losses in machinery.
PhD thesis, University of Nottingham.
Hassan, Ali Jameel
(2020)
Laminated composites of continuous steered fibres along curved paths: characterisation and optimisation.
PhD thesis, University of Nottingham.
Hassan, Zain
(2021)
A new modular multilevel converter for HVDC applications.
PhD thesis, University of Nottingham.
Hassn, Abdushafi Alhashmi
(2017)
Effect of air voids on pavement thermal properties.
PhD thesis, University of Nottingham.
Hauck, Robert
(2017)
Virtual surgery and orthopaedic surgery: towards training using haptic technology.
PhD thesis, University of Nottingham.
He, Chenyang
(2021)
Optical fibre sensing for physical and biochemical health monitoring.
PhD thesis, University of Nottingham.
He, Qiyi
(2021)
A machine learning-based anomaly detection framework for connected and autonomous vehicles cyber security.
PhD thesis, University of Nottingham.
He, Yinfeng
(2016)
An investigation of inkjet printing of polycaprolactone based inks.
PhD thesis, University of Nottingham.
Hee, Jee Loong
(2020)
Experimental and computational investigation into oil shedding from an aeroengine ball bearing.
PhD thesis, University of Nottingham.
Hegab, Abdelrahman H.I.
(2018)
Combustion characteristics of methane-diesel dual-fuel engines at light load conditions with different injection strategies.
PhD thesis, University of Nottingham.
Heil, Joseph Paul
(2016)
Analysis of composites recycling and thermal oxidative treatments on carbon fibre.
PhD thesis, University of Nottingham.
Helal, Mohamad Anas
(2017)
Analysis of the impact of external optical feedback on the performance of high-power and high-brightness laser diodes.
PhD thesis, University of Nottingham.
Hellewell, Joseph S.
(2020)
Control strategies with human factors for active steering.
PhD thesis, University of Nottingham.
Helmi, Masdar
(2016)
Thermo-physical properties and high-temperature durability
of reactive powder concrete (RPC).
PhD thesis, University of Nottingham.
Heneash, Usama
(2013)
Effect of the repeated recycling on hot mix asphalt properties.
PhD thesis, University of Nottingham.
Hernandez Carrillo, Isaias
(2020)
The development of a micro-scale turbine-generator and its potential application to develop a micro-scale and cost-effective ORC power plant.
PhD thesis, University of Nottingham.
Hernandez Ledezma, Francisco Ulises
(2018)
Optical fibre sensors for novel medical devices during anaesthesia.
PhD thesis, University of Nottingham.
Herzog, Nitzan
(2017)
Rapid solution exchange to entire neuronal cultures grown on multi electrode arrays.
PhD thesis, University of Nottingham.
Hilal, Ameer Abdulrahman
(2015)
Properties and microstructure of pre-formed foamed concretes.
PhD thesis, University of Nottingham.
Hill-Casey, Fraser
(2018)
Hyperpolarised noble gas nuclear magnetic resonance and magnetic resonance imaging studies of complex porous media.
PhD thesis, University of Nottingham.
Hodgins, Genevieve R.
(2020)
Broadline 1H NMR investigations of the mobility of polymers supported on carbonaceous particles and silica substrates.
EngD thesis, University of Nottingham.
Hoey, Thomas Michael
(2017)
Evaluation of high temperature performance of the Co-Cr-C coated P92 steel.
EngD thesis, University of Nottingham.
Holmes, Paul
(2018)
Towards a person-centric interface for information re-finding and sharing tasks.
PhD thesis, University of Nottingham.
Home, Philip
(2022)
Quantifying urban forest structure in Greater Manchester with open-access remote sensing datasets.
MRes thesis, University of Nottingham.
Horne, Colin
(2016)
A phenomenological model of the neural response to pulsatile electrical stimulation: a novel approach and theoretical considerations.
PhD thesis, University of Nottingham.
Hossain, Kazi Md Zakir
(2014)
Extension of the use of cellulose nanowhiskers in composite materials.
PhD thesis, University of Nottingham.
Hossain, Md Mohataz
(2018)
Improving environmental condition of workspaces of multi-storey ready-made garment factories in Bangladesh.
PhD thesis, The University of Nottingham.
Hossain, Syed Tauseef
(2016)
Thermoelastic damping and support loss in MEMS ring resonators.
PhD thesis, University of Nottingham.
Hoteit, Camille
(2018)
The development of an apoferritin-based artificial metalloenzyme for catalysis of sulfide oxidation.
MPhil thesis, University of Nottingham.
Howard, Sam
(2017)
Electronic monitoring devices: necessary steps for their successful integration with current asthma care.
PhD thesis, University of Nottingham.
Howe, Carmel Leah
(2018)
Developing a novel sensor technology for detecting neural activity based on surface plasmon resonance.
PhD thesis, University of Nottingham.
Hromadka, Jiri
(2017)
Development of multi-parameter fibre optic chemical sensor system based on long period gratings modified with the functional thin films.
PhD thesis, University of Nottingham.
Hsu, Yun-Sheng
(2021)
The impact of wind on the building airtightness measurement using the Pulse Technique.
PhD thesis, University of Nottingham.
Hu, Chenxi
(2021)
Decoration of graphene-carbon nanotube nanostructures: synthesis and applications.
PhD thesis, University of Nottingham.
Huang, Shan
(2016)
Numerical and experimental study on pin-fin based cooling structure for gas turbine application.
PhD thesis, University of Nottingham.
Huang, Yan
(2017)
Implementation and performance evaluation of spectrum sensing using software defined radio.
MRes thesis, University of Nottingham.
Hui, Dominic
(2019)
An investigation into laser sintering of nano-hydroxyapatite coated powders for bone tissue applications.
PhD thesis, University of Nottingham.
Hunter, Nick
(2021)
Research on the uncontrolled zero-sequence current of an open-end winding PMSM with common DC link.
PhD thesis, University of Nottingham.
Hussaini, Habibu
(2023)
Control of electrical systems using artificial intelligence for more electric aircraft applications.
PhD thesis, University of Nottingham.
Huynh, Van Long
(2019)
1D morphodynamical modelling of macro-tidal sandy beaches under pure tidal currents.
PhD thesis, University of Nottingham.
I
Ibrahim, Abubakr
(2017)
Experimental investigation of gas lift technique in viscous fluids.
PhD thesis, University of Nottingham.
Idinyang, Solomon
(2017)
Automated liquid handling systems for microfluidic applications.
PhD thesis, University of Nottingham.
Iliffe, Mark Peter
(2017)
The praxis of community mapping in developing countries.
PhD thesis, University of Nottingham.
Incelli, Giorgio
(2016)
A fully-coupled coastal hydro-morphodynamical numerical solver.
PhD thesis, University of Nottingham.
Iracheta-Cabrera, Omar Adrian
(2017)
A holistic inverse approach on depth-sensing indentation characterisation and its application for predicting residual stresses in multi-phase inertia friction welds.
PhD thesis, University of Nottingham.
Isaia, Cristina
(2018)
Characterisation of knitted conductive textiles for wearable motion sensor applications.
PhD thesis, University of Nottingham.
Islam, Md Rezaul
(2016)
A floating liner facility and studies of friction at a reciprocating piston-cylinder wall interface.
PhD thesis, University of Nottingham.
Islam, Md Towhidul
(2019)
Manufacture and characterisation of porous phosphate, borate and silicate glass microspheres for biomedical applications.
PhD thesis, University of Nottingham.
Ivry, Preye Milton
(2016)
Predicting stochastic harmonics of multiple converters in a power system (microgrid).
PhD thesis, University of Nottingham.
J
Jaafar, Hasan Abdulhussein
(2017)
Detection and localisation of structural deformations using terrestrial laser scanning and generalised procrustes analysis.
PhD thesis, University of Nottingham.
Jackson, Cameron
(2021)
A self-optimising continuous-flow hydrothermal reactor for nanomaterial synthesis.
PhD thesis, University of Nottingham.
Jackson, George Anthony
(2018)
Influence of microstructure on the mechanical properties of thermally sprayed NiCoCrAlY coatings determined by small punch testing.
PhD thesis, University of Nottingham.
Jackson, Samuel J.
(2017)
A numerical study on the viscous fingering instability of immiscible displacement in Hele-Shaw cells.
PhD thesis, University of Nottingham.
Jahanger, Hayder Kadhim Jahanger
(2019)
A practical investigation of wideband impedance based fault location technologies.
PhD thesis, University of Nottingham.
Jalal, Bawar
(2023)
Real-time electromagnetic visualisation using augmented reality and accelerated models.
PhD thesis, University of Nottingham.
Jaly Zada, Aras Jalal
(2016)
Versioning of IFC-based information models for collaborative design.
PhD thesis, University of Nottingham.
Janjua, Zaid Ayaz
(2017)
Ice accretion on aerofoils.
PhD thesis, University of Nottingham.
Jankovic, Marija
(2017)
High power modular converters for grid interface applications.
PhD thesis, University of Nottingham.
Jayamaha, Prasanthi Charmalee
(2015)
Energy storage for frequency support in weak electrical grids.
PhD thesis, University of Nottingham.
Jayamanne, J.M.O.
(2024)
A feasibility analysis in incorporating low cost GNSS receivers for deformation monitoring in high rise buildings.
MRes thesis, University of Nottingham.
Jefferson, Thomas G.
(2017)
Reconfigurable assembly system design methodology for aerospace wing structures.
EngD thesis, University of Nottingham.
Jenidi, Youla
(2017)
Bioremediation of estrone from water matrices using the enzyme laccase combined with mathematical modelling.
PhD thesis, University of Nottingham.
Jenkinson, Philip
(2016)
A new classification system for biomass and waste materials for their use in combustion.
EngD thesis, University of Nottingham.
Jiménez del Barco Carrión, Ana
(2017)
Design and characterisation of reclaimed asphalt mixtures with biobinders.
PhD thesis, University of Nottingham.
Jin, Xiaozhe
(2017)
Investigation of the interrelated effects of temperature and frequency on fretting wear.
PhD thesis, University of Nottingham.
Jing, Hao
(2015)
Indoor collaborative positioning based on a multi-sensor and multi-user system.
PhD thesis, University of Nottingham.
Jodeiri, Keyvan
(2023)
Development of 3D printed enzymatic biofuel cells for powering implantable biomedical devices.
PhD thesis, University of Nottingham.
Johnstone, Alex
(2016)
Microfluidic systems for neuronal cell culture.
PhD thesis, University of Nottingham.
Jones, F.E
(2022)
The effect of heterogeneity in sedimentary properties on fluid flow behaviour at the pore-scale.
PhD thesis, University of Nottingham.
Joseph, Genora M.D.
(2016)
Improved dust dispersion modelling for surface quarries: an optimized RANS k − ε approach.
PhD thesis, University of Nottingham.
Jung, David S.
(2016)
Optical assessment of middle ear inflammation.
PhD thesis, University of Nottingham.
K
Kabir, Sumaya Farhana
(2017)
Preparation and characterisation of hyperbranched poly divinyl benzene and star branched poly lactic acid blends and their composites.
PhD thesis, University of Nottingham.
Kadhim, Manahil
(2019)
Visualisation of nanoslurries and hybrid nanomaterials.
PhD thesis, University of Nottingham.
Kakade, Rohan
(2016)
Improved resolution and signal-to-noise ratio performance of a confocal fluorescence microscope.
PhD thesis, University of Nottingham.
Kakouris, Emmanouil G.
(2019)
Linear elastic fracture mechanics via the Material Point Method: a phase field approach.
PhD thesis, University of Nottingham.
Kalamiotis, Alexis
(2020)
Direct online monitoring and control of chemical reactions using dielectric spectroscopy.
PhD thesis, University of Nottingham.
Kamla, Jwan Jameel Shekh Mohammed
(2016)
Analysing truck position data to study roundabout accident risk.
PhD thesis, University of Nottingham.
Kang, JiJun
(2013)
Determination of elastic-plastic and visco-plastic material properties from instrumented indentation curves.
PhD thesis, University of Nottingham.
Kantharaj, Bharath
(2019)
An investigation of compressed air energy storage methods.
PhD thesis, University of Nottingham.
Kanu, Aimé Uzochukwu
(2013)
Characterisation of Churn Flow Coalescers (CFC) in vertical pipes.
PhD thesis, University of Nottingham.
Kapsalis, Efthymios Timo
(2024)
Contemporary use of co-design and computational design methods for inclusive built environments: a case study of platform-train interfaces.
PhD thesis, University of Nottingham.
Karanatsis, Dimitrios
(2020)
Development of novel fibre reinforcement architectures.
EngD thesis, University of Nottingham.
Karim, Shah
(2020)
Real-time target alignment system for high-power laser operations using a hybrid mechanism.
PhD thesis, University of Nottingham.
Karimi, Gilbert
(2019)
Corrosion of hardfacings for nuclear (PWR) applications.
PhD thesis, University of Nottingham.
Kariou, Florentia
(2020)
Textile reinforced mortars for masonry structures.
PhD thesis, University of Nottingham.
Katili, Adrian Rosseno
(2019)
A theoretical and experimental investigation of a solid desiccant air dehumidification system using shell-tube heat and mass exchanger configuration.
PhD thesis, University of Nottingham.
Keane, David James
(2015)
User centred approach to the design, development and implementation of patient information.
PhD thesis, University of Nottingham.
Kendall, Peter
(2018)
Mechanical characterisation of adhesive bonds in MEMS inertial sensors.
PhD thesis, University of Nottingham.
Kesseler, Matthew
(2019)
Laboratory-numerical investigation of scale effects in granular slides.
PhD thesis, University of Nottingham.
Key, Ross A.
(2016)
Automated manufacturing processes for secondary structure aerospace composites.
PhD thesis, University of Nottingham.
Khan, Muhammad Farhan
(2018)
Design optimisation for stent manufacture.
PhD thesis, University of Nottingham.
Khan, Muhammad Waleed
(2017)
Dynamic filtration at soil-geotextile interfaces.
PhD thesis, University of Nottingham.
Khan, Neeshe
(2023)
A human centric approach to unintentional insider threat: development of a sociotechnical framework.
PhD thesis, University of Nottingham.
Khashan, Lamia M.A.
(2015)
Dispersion analysis of two-dimensional unstructured transmission line modelling (UTLM).
PhD thesis, University of Nottingham.
Khera, Fatma
(2021)
Analysis, design and evaluation of quasi Z-Source modular multilevel converter.
PhD thesis, University of Nottingham.
Khojinian, Arash
(2020)
Performance analysis of thin surface course systems used in England: a novel approach based on viscous to elastic transition (VET) parameters.
PhD thesis, University of Nottingham.
Khowja, Muhammad Raza
(2019)
Integrated passive filter inductors for motor drive applications.
PhD thesis, University of Nottingham.
Kiamba, Lorna Ndanu
(2016)
Optimising environmental design strategies to improve thermal performance in office buildings in Kenya.
PhD thesis, University of Nottingham.
Kilsby, Paul
(2017)
Modelling railway overhead line equipment asset management.
PhD thesis, University of Nottingham.
Kinley, Laura Rhiannon
(2016)
Exploring the use of crowd generated geospatial content in improving the quality of ecological feature mapping.
MPhil thesis, University of Nottingham.
Kirk, Adam
(2021)
The role of debris in fretting: investigation into the interrelated effects of displacement amplitude and frequency in fretting wear.
PhD thesis, University of Nottingham.
Kisha, Wigdan
(2020)
A regenerator-based thermoacoustic electricity generator with different configurations for rural communities of South Sudan country.
PhD thesis, University of Nottingham.
Knott, Andrew N.
(2018)
3D printing of light trapping structures for dye-sensitised solar cells.
PhD thesis, University of Nottingham.
Kolluru, Kiran V.S.S.
(2015)
On design and simulation of passive damping solutions for milling of thin-walled parts.
PhD thesis, University of Nottingham.
Komonibo, Ebiundu
(2018)
Liquid-liquid flow in baffled vessels and pipes.
PhD thesis, University of Nottingham.
Kong, Weiyi
(2016)
Macro-scale modelling of the impact response of 3D woven composites for aerospace applications.
PhD thesis, University of Nottingham.
Konta, Andrea Alice
(2022)
New multi-material formulations for vat-photopolymerisation and their application in manufacturing ocular implants.
PhD thesis, University of Nottingham.
Kounnos, Petros
(2018)
Hierarchical control framework to exploit community energy storage for both local and system benefit.
PhD thesis, University of Nottingham.
Kret, Kayla Danielle
(2021)
Development and evaluation of sustainable hydrogel technologies for tissue engineering.
PhD thesis, University of Nottingham.
Kruusimagi, Martin
(2017)
Designing the user experience of a spatiotemporal automated home heating system: a holistic design and implementation process.
PhD thesis, University of Nottingham.
Kulsangcharoen, Ponggorn
(2013)
Characterization and emulation of a new supercapacitor-type energy storage device.
PhD thesis, University of Nottingham.
Kumar, Das Soumitra
(2019)
The finite operator model for step index fibres.
PhD thesis, University of Nottingham.
Kumar, Shubham
(2019)
An investigation into full-ring radial-gap air-riding seals for aeroengines.
PhD thesis, University of Nottingham.
Kumar, Varindra
(2014)
I/O port macromodelling.
PhD thesis, University of Nottingham.
Kuna, Kranthi
(2015)
Mix design considerations and performance characteristics of foamed bitumen mixtures (FBMs).
PhD thesis, University of Nottingham.
Kutlu, Cagri
(2020)
A novel a-Si PV/T solar cogeneration system using the coupled thermal storage/ORC as an alternative to battery.
PhD thesis, University of Nottingham.
Kyaw, Si Thu
(2013)
Finite element modelling of stresses and failure within plasma spray thermal barrier coating systems.
PhD thesis, University of Nottingham.
L
La Cavera III, Salvatore
(2021)
Optical fibre-based time resolved Brillouin scattering.
PhD thesis, University of Nottingham.
La Rocca, Antonino
(2016)
Thermal analysis of a high speed electrical machine.
PhD thesis, University of Nottingham.
La Rocca, Salvatore
(2019)
Thermal modelling of a totally enclosed fan-cooled electrical machine.
PhD thesis, University of Nottingham.
Lacalle Jiménez, Helena Isabel
(2017)
Airfield pavement design with cold recycled materials.
PhD thesis, University of Nottingham.
Lam Wing Cheong, Marc F.
(2018)
Experimental and numerical investigations into the behaviour of a 7175-T7351 aluminium alloy for aerospace gearbox housing applications at elevated temperatures.
PhD thesis, University of Nottingham.
Lamond, Alexander Robert
(2018)
Techno-economic and carbon emissions analysis of biogas utilisation systems in the UK.
PhD thesis, University of Nottingham.
Land, Patrick
(2018)
Defect profiling of hot roll formed carbon-epoxy composite laminates during production.
EngD thesis, University of Nottingham.
Laolu-Balogun, Emmanuel
(2023)
The effect of fretting conditions on the lifetime of aero-engine dry film lubricants systems.
PhD thesis, University of Nottingham.
Laryea, Sydney N.K.B.
(2018)
An investigation into the performance of railway sleeper types and geogrid-reinforced ballast.
PhD thesis, University of Nottingham.
Le, Thi Ho Vi
(2020)
Investigating the influence of design parameters on the indoor environmental quality and thermal comfort in primary schools in Ho Chi Minh City, Vietnam.
PhD thesis, University of Nottingham.
Lebeau, Juliana Laurence Dominique
(2018)
Improving the carbon efficiency in the bio-production of citramalic acid in Escherichia coli.
PhD thesis, University of Nottingham.
Ledesma Fernandez, Javier
(2018)
Jetting of multiple functional materials by additive manufacturing.
PhD thesis, University of Nottingham.
Lee, Robert
(2021)
Modelling methodologies for railway asset management.
PhD thesis, University of Nottingham.
Lee, Yaw Chuan
(2009)
Characterisation of the torsional behaviour of titanium metal matrix composite shafts.
PhD thesis, University of Nottingham.
Lee, Youngsil
(2019)
Design and implementation of a three-phase dual active bridge DC-DC converter for MVDC applications.
PhD thesis, University of Nottingham.
Lehder, Eric Federico
(2023)
Experimentally supported computational method for the optimal design selection of 3D printed fracture healing implant geometries.
PhD thesis, University of Nottingham.
Levadoux, Galatée P.
(2019)
In-situ monitoring of production of large composite structures using tool embedded capacitors.
PhD thesis, University of Nottingham.
Lewis, Laura
(2015)
Investigating the ways in which virtual environments could influence aircraft passengers' comfort and experiences.
PhD thesis, University of Nottingham.
Lewis, Rachel V.
(2017)
Characterisation of degraded solvents from the amine scrubbing process.
EngD thesis, University of Nottingham.
Leworthy, Samuel C.
(2022)
Fundamental analysis of self-healing phenomena in asphalt mixtures.
PhD thesis, University of Nottingham.
Li, Chunling
(2014)
Al-Co-Ce glass forming alloys and their corrosion behaviour.
PhD thesis, University of Nottingham.
Li, Dafei
(2021)
Modelling damage due to low speed impact in laminated composites of toughened interfaces through 'ex-situ' technique.
PhD thesis, University of Nottingham.
Li, Huiqi
(2013)
Discrete element method (DEM) modelling of rock flow and breakage within a cone crusher.
PhD thesis, University of Nottingham.
Li, Jiaqi
(2021)
Vibration analysis and investigation of synchronous reluctance motor.
PhD thesis, University of Nottingham.
Li, Junfu
(2018)
Correlation of electron delocalisation with pseudocapacitance in nanostructured carbon.
PhD thesis, University of Nottingham.
Li, Kang
(2021)
Optimal H2 control design of active front-end integrating grid model identification.
PhD thesis, University of Nottingham.
Li, Qile
(2016)
Combustion aided by a glow plug in diesel engines under cold idling conditions.
PhD thesis, University of Nottingham.
Li, Wang
(2023)
Investigation on thermal and kinetic dynamics of droplets.
PhD thesis, University of Nottingham.
Li, Wei
(2022)
Impact of moisture on estimating gas in place for shales: characterisation and simulation studies on kerogens.
PhD thesis, University of Nottingham.
Li, Yuezhao
(2020)
Novel cascaded control systems for microfluidic devices.
PhD thesis, University of Nottingham.
Lindop, Martyn
(2015)
A study of open-cell nickel-chrome metallic foam for an abradable compressor sealing.
MPhil thesis, University of Nottingham.
Liu, Chong
(2020)
Non-invasive photoplethysmography and contact pressure optical fibre sensor.
PhD thesis, University of Nottingham.
Liu, Jingjing
(2017)
Effective carbon adsorbents of solid looping technologies for post combustion carbon capture.
PhD thesis, University of Nottingham.
Liu, LiangLiang
(2019)
Development of fibre optic bio-/chemical sensors for healthcare applications.
PhD thesis, University of Nottingham.
Liu, Shu
(2016)
Application of shakedown theory in the structural design of bituminous pavements.
PhD thesis, University of Nottingham.
Liu, Tian-Hui
(2020)
Developing cathode and electrolyte materials for intermediate temperature solid oxide fuel cells.
PhD thesis, University of Nottingham.
Liu, Xin
(2017)
Facile synthesis of novel activated carbons for the post-combustion capture of CO2.
PhD thesis, University of Nottingham.
Liu, Yawen
(2017)
Prediction of pavement surface deterioration.
PhD thesis, University of Nottingham.
Liu, Zhe
(2017)
Characterization of discontinuous carbon fibre mat produced by hydrodynamic processes.
PhD thesis, University of Nottingham.
Llamas-Orozco, Jorge Armando
(2023)
Dynamic life cycle assessment of lithium-ion batteries for electric vehicles.
PhD thesis, University of Nottingham.
Lloyd, Michael D.
(2014)
A phased mission approach to fault propagation.
PhD thesis, University of Nottingham.
Lodro, Mir
(2021)
Near-field MIMO for wireless communication in complex propagation environments.
PhD thesis, University of Nottingham.
Lodro, Mir Muhammad
(2015)
On the technical challenges of cognitive radio in TV white spaces.
MRes thesis, University of Nottingham.
Lowth, Stewart
(2016)
Variation conscious assembly fixturing methodologies for the preliminary weld processes of segmented ring structures.
PhD thesis, University of Nottingham.
Lozano Torrubia, Pablo
(2016)
Stochastic modelling of abrasive waterjet controlled-depth machining.
PhD thesis, University of Nottingham.
Lu, Yang
(2016)
Seismic soil-structure interaction in performance-based design.
PhD thesis, University of Nottingham.
Lunn, Geoffrey David
(2018)
Wire flame sprayed aluminium coatings onto polymer and CFRP substrates.
PhD thesis, University of Nottingham.
M
MD Alwi, Najah
(2020)
Urban parks for people in a megacity: green spaces as social places in the twenty-first century Jakarta, Indonesia.
PhD thesis, University of Nottingham.
Maggiore, Cinzia
(2014)
A comparison of different test and analysis methods for asphalt fatigue.
PhD thesis, University of Nottingham.
Mahdiyasa, Adilan
(2024)
Modelling fully coupled mechanical, ecological, and hydrological feedback on peatland development.
PhD thesis, University of Nottingham.
Makashev, Kuanysh
(2022)
Textile reinforced mortar to masonry bond under static and fatigue loading.
PhD thesis, University of Nottingham.
Maliehe, K.A.
(2022)
A spatiotemporal analysis of methane emissions in South Africa using observations of Sentinel-5P’s TROPOspheric Monitoring Instrument.
MRes thesis, University of Nottingham.
Mancini, Giulia
(2021)
Numerical modelling of intra-wave sediment transport on sandy beaches using a wave-resolving, non-hydrostatic model.
PhD thesis, University of Nottingham.
Mani, Mohammad H.
(2016)
Ultrasonic instrument for accurate measurements of spatial parameters in blood vessels.
PhD thesis, University of Nottingham.
Mani, Mohammad Reza
(2016)
Investigating the effect of process parameters on dimensional accuracy and ultimate tensile strength of micro injection moulded micro parts.
PhD thesis, University of Nottingham.
Mann, Sophie
(2022)
An investigation into the relationship between synthetic aperture radar (SAR) data and beach sediment grain size.
MRes thesis, University of Nottingham.
Manon, Alexandre
(2023)
Electrical conductivity enhancement of alkaline earth titanates for high-temperature thermoelectric applications.
PhD thesis, University of Nottingham.
Mansoor, Yousuf Ali
(2018)
The effect of oil feed pressure on friction and cavitation
in plain bearings.
PhD thesis, University of Nottingham.
Marfoli, Alessandro
(2020)
Performance enhancement of squirrel cage induction motor through optimised electromagnetic design.
PhD thesis, University of Nottingham.
Marinescu, Adrian Cornelius
(2018)
Facial thermography for assessment of workload in safety critical environments.
PhD thesis, University of Nottingham.
Martin, Ffion A.
(2018)
High pressure liquid moulding of composites.
EngD thesis, University of Nottingham.
Martin-Clave, Carla
(2021)
Impact of second phase content over rheological behaviour of rock salt under cyclic loading conditions applied to Underground Gas Storage.
EngD thesis, University of Nottingham.
Martinez Diez, Carlos
(2019)
Operation and control of the series bridge modular multilevel converter (SBC) for HVDC applications.
PhD thesis, University of Nottingham.
Martins, Floriane
(2021)
Engineering of artificial metalloenzymes based on alcohol dehydrogenase scaffold.
PhD thesis, University of Nottingham.
Martins, Laura
(2020)
Towards the bioproduction of methacrylate esters: understanding product toxicity in Escherichia coli.
PhD thesis, University of Nottingham.
Matveev, Mikhail Y.
(2015)
Effect of variabilities on mechanical properties of textile composites.
PhD thesis, University of Nottingham.
Matziaris, Vasileios
(2019)
Centrifuge modelling of rainfall-induced landslides in unsaturated soil slopes.
PhD thesis, University of Nottingham.
Mbah, Afamefuna Maduka
(2016)
Hybrid fibre and free-space optical solutions in optical access networks.
PhD thesis, University of Nottingham.
McAlister, William
(2016)
Novel size separation techniques for aggregates of embryonic stem cells using the Stokes equation.
PhD thesis, University of Nottingham.
McCarthy, Benjamin P.
(2018)
Synthesis and characterisation of multi-substituted hydroxyapatites.
PhD thesis, University of Nottingham.
McCartney, Damon Andrew
(2013)
Development of the AnimalSeek method to evaluate the localisation ability of children under five.
PhD thesis, University of Nottingham.
McCorquodale, Mark W.
(2018)
Interaction between oscillating-grid turbulence and a solid impermeable boundary.
PhD thesis, University of Nottingham.
McGhee, Michael James
(2013)
Factors influencing cycle-by-cycle combustion characteristics of a diesel engine under cold idling conditions.
PhD thesis, University of Nottingham.
McMullin, Nicholas
(2015)
Numerical and experimental modelling of dam break interaction with a sediment bed.
PhD thesis, University of Nottingham.
Meesit, Ratthaphong
(2019)
Railway network resilience.
PhD thesis, University of Nottingham.
Meghani, Bishan
(2015)
Moving bed temperature swing adsorption processes for post-combustion CO2 capture.
EngD thesis, University of Nottingham.
Meletiou, Athina
(2018)
Large-scale grid computing approaches towards mapping the conformational space of mycolic acids from Mycobacterium tuberculosis.
PhD thesis, University of Nottingham.
Memon, Halar
(2021)
Research and development of polyurethane icephobic composite coatings.
PhD thesis, University of Nottingham.
Menchavez, Russel
(2020)
Host cell engineering for the production of methacrylate esters.
PhD thesis, University of Nottingham.
Mendez Villalon, Armando
(2020)
Modular wireless trackside signalling system: towards Rail Internet of Things (RIoT).
PhD thesis, University of Nottingham.
Meng, Fanran
(2017)
Environmental and cost analysis of carbon fibre composites recycling.
PhD thesis, University of Nottingham.
Menghao, Chen
(2018)
Developing a novel in-situ polymerisation process for fully bioresorbable fibre reinforced composites.
PhD thesis, University of Nottingham.
Mert Cuce, Ayse Pinar
(2016)
Innovative heating, cooling and ventilation technologies for low-carbon buildings.
PhD thesis, University of Nottingham.
Michot Roberto, Sonia Elisa
(2022)
3D-simulation of packing of aggregates with realistic morphology and size distribution, by using a real-time physics’ engine.
PhD thesis, University of Nottingham.
Milborne, Ben
(2023)
Phosphate-based glass microspheres for bone repair and localised chemotherapy and radiotherapy treatment of bone cancers.
PhD thesis, University of Nottingham.
Mistry, Priyen C.
(2016)
Coated metal hydrides for stationary energy storage applications.
PhD thesis, University of Nottingham.
Mitchelmore, Robert Eurig
(2016)
The usefulness of case in plastic user interfaces.
PhD thesis, University of Nottingham.
Mitrousi, Marina-Eirini
(2022)
Investigation of laser sintering of pharmaceutical excipients for oral solid dosage forms.
PhD thesis, University of Nottingham.
Mitzakoff, Anna Marie-Thérèse
(2024)
Development and characterization of a protein based
mineralizing bio-ink.
PhD thesis, University of Nottingham.
Mohamed, Mohamed
(2022)
Optimised DC microgrid for future aircraft platforms.
PhD thesis, University of Nottingham.
Mohamed, Sara A.M.
(2017)
Improving building fabric for energy efficiency in hot climates by applying passive cooling strategies: a case study for school buildings: towards environmental school buildings in hot, arid region.
MPhil thesis, University of Nottingham.
Mohammed, Ahmed M.
(2017)
Considerations on the use of solid material for high performance, tubular linear motors.
PhD thesis, University of Nottingham.
Mohammed, Haneen Adil
(2018)
Design and evaluation of two-layer roller compacted concrete.
PhD thesis, University of Nottingham.
Mohammed, Hayder I.
(2019)
Numerical and experimental investigation of boiling nanofluids in vapour absorption refrigeration.
PhD thesis, University of Nottingham.
Mohammed, Jareer Jaber
(2017)
Precise Point Positioning (PPP): GPS vs. GLONASS and GPS+GLONASS with an alternative strategy for tropospheric Zenith Total Delay (ZTD) estimation.
PhD thesis, University of Nottingham.
Mohammed, Monketh
(2019)
Permanent deformation resistance of fibre reinforced asphalt mixture.
PhD thesis, University of Nottingham.
Mohammed, Shara Kamal
(2017)
Gas-high viscosity oil flow in vertical large diameter pipes.
PhD thesis, University of Nottingham.
Molina, Constanza
(2020)
A data analysis of the Chilean housing stock and the estimation of uncertainty in indoor air quality in Chilean houses.
PhD thesis, University of Nottingham.
Molinar Diaz, Jesus
(2023)
Novel magnetic micro-structured porous materials for biomedical applications.
PhD thesis, University of Nottingham.
Monemian Esfahani, Emadoddin
(2019)
Experimental and numerical evaluation of diesel-hydrogen dual-fuel combustion in a HD single cylinder engine.
PhD thesis, University of Nottingham.
Monsalvete Alvarez de Uribarri, Pilar
(2020)
A multiscale framework for predicting distributed renewable thermal energy integration.
PhD thesis, University of Nottingham.
Montillet, Jean-Philippe
(2008)
Precise positioning in urban canyons : applied to the localisation of buried assets.
PhD thesis, University of Nottingham.
Mordaka, Pawel Mateusz
(2014)
Reductions using Clostridium sporogenes.
PhD thesis, University of Nottingham.
Morgan, Hayden
(2019)
Microbial response to low concentrations of oxygen in a carbon dioxide storage environment.
EngD thesis, University of Nottingham.
Mortimer, Zahara
(2024)
Nutritional profile optimisation of carbon dioxide fixing bacteria by molecular engineering.
EngD thesis, University of Nottingham.
Moslemin Koupaie, Mohammadmohsen
(2019)
A study of flame and flow development with hydrous and anhydrous fuels in an optical spark ignition engine.
PhD thesis, University of Nottingham.
Mossayebi, Mina
(2019)
Hybrid Photonic-Plasmonic Structures for Optical Trapping of Nanoparticles.
PhD thesis, University of Nottingham.
Msaewe, Hussein Alwan Mahdi
(2018)
Assessment of the accuracy and the contribution of multi-GNSS in structural monitoring.
PhD thesis, University of Nottingham.
Muheisen, Hana'a
(2019)
Exploring the toxicity of styrene bio-production & the tolerance of other related organic solvents in E. coli by expressing different efflux pump systems.
PhD thesis, University of Nottingham.
Muller-Pollmann, Nicolas
(2021)
Energy storage for complementary services in grid-tied PV systems.
PhD thesis, University of Nottingham.
Murray, Bryan Gerrard
(1994)
Low frequency impedance and structural properties of high temperature superconducting YBa2Cu3Ox thin films.
PhD thesis, University of Nottingham.
Mushtaq, Qasim M.
(2022)
Investigation of synthesis methods of ZIF-8 membranes for CO2/CH4 separation.
PhD thesis, University of Nottingham.
Muzammal, Shafaq
(2021)
Molecular interactions of protein-based materials with ionic liquids.
PhD thesis, University of Nottingham.
Mwenegoha, Hery Amani
(2022)
Advanced navigation architecture for low-cost unmanned aerial vehicles.
PhD thesis, University of Nottingham.
N
Nag, Ranajit Kumar
(2015)
Influence of fibre surface treatments and textile process on the properties of natural composites.
PhD thesis, University of Nottingham.
Naghiyev, Arzoo
(2017)
Human factors of train driving with incab control and automation technology.
PhD thesis, University of Nottingham.
Naghiyev, Eldar
(2014)
Device-free localisation in the context of domestic energy saving control methods.
PhD thesis, University of Nottingham.
Nasir, Usman
(2019)
A modular isolated AC/AC matrix converter.
PhD thesis, University of Nottingham.
Naskou Athanasios, Konstantinos
(2018)
Photogrammetric computer vision methods for the automatic 3D reconstruction of virtual sports environments.
PhD thesis, University of Nottingham.
Nassar, Ahmed Izat Mohammed
(2016)
Enhancing the performance of cold bitumen emulsion mixture using supplementary cementitious materials.
PhD thesis, University of Nottingham.
Nasser, Hayan
(2016)
3D to 2D surface mesh parameterisation for the purposes of unstructured transmission line modelling method simulations.
PhD thesis, University of Nottingham.
Naybour, Matthew
(2020)
Applying reliability engineering techniques to the process of community pharmacy dispensing.
PhD thesis, University of Nottingham.
Naybour, Susannah
(2021)
Modelling safety critical systems with ageing components, with application to underground railway risk and hazards.
PhD thesis, University of Nottingham.
Nethercott, Alanna Mary
(2018)
Engineering of a thermostable alcohol dehydrogenase towards imine reduction.
PhD thesis, University of Nottingham.
Newbolt, Gary S.
(2018)
Modelling of biomass milling.
EngD thesis, University of Nottingham.
Newton, Lewis
(2020)
Development of methods for measuring and characterising the surface topography of additively manufactured parts.
PhD thesis, University of Nottingham.
Nguyen, Dinh Tung
(2017)
Vortex-induced vibration of a 5:1 rectangular cylinder:
new computational and mathematical modelling approaches.
PhD thesis, University of Nottingham.
Niaz, Akbar
(2013)
Complementary use of electrochemical testing techniques to study corrosion processes of HVOF Inconel 625, CoNiCrAIY and WCCoCr coatings.
PhD thesis, University of Nottingham.
Nicholls, Tristan Kit
(2013)
Adhesive bonding of discontinuous carbon fibre composites: an experimental investigation.
PhD thesis, University of Nottingham.
Nichols, David
(2020)
Impact of aluminosilicate additives on potassium retention during biomass combustion.
EngD thesis, University of Nottingham.
Nicholson, Jonathon M. P.
(2020)
The fluid and thermal dynamics of rimming flows with boundary slip.
PhD thesis, University of Nottingham.
Nigar, Farah
(2023)
Development of calcium phosphates from waste resources and fabrication of calcium phosphate-chitosan composites.
PhD thesis, University of Nottingham.
Njoku, Romanus Egwuonwu
(2017)
Open-cell porous aluminium for heat transfer applications.
MPhil thesis, University of Nottingham.
Noori, Abdulrazzaq Fouad Noori
(2019)
Investigations into fault ride through and fault location for HVDC.
PhD thesis, University of Nottingham.
Nottingham, Megan U.
(2019)
The persistence of the block as an urban structure: a comparative study of the typology of the Berlin Block.
PhD thesis, University of Nottingham.
Nsaif, Maha
(2021)
An experimental investigation into the effect of freeze-thaw cycles on silty sands.
PhD thesis, University of Nottingham.
Nsamba, Hussein Kisiki
(2018)
Performance evaluation and modelling of a small-scale biomass gasifier.
PhD thesis, University of Nottingham.
Ntourmas, Georgios
(2023)
Detailed sizing optimisation of industrial-scale composite aeronautical structures.
PhD thesis, University of Nottingham.
Nuzzo, Stefano
(2018)
On the damper cage of salient-pole synchronous generators.
PhD thesis, University of Nottingham.
O
Obaidi, Hadel Ibraheem Ahmad
(2018)
Development of innovative pothole repair materials using induction heating technology.
PhD thesis, University of Nottingham.
Obiekezie, Chijioke S.
(2016)
Extended equivalent dipole model for radiated emissions.
PhD thesis, University of Nottingham.
Odeyemi, Jomiloju
(2022)
Stretched coordinate PML in TLM.
PhD thesis, University of Nottingham.
Ogbuka, Chidi Premie
(2013)
Development of solid adsorbent materials for CO₂capture.
PhD thesis, University of Nottingham.
Ogilvie, Duncan
(2018)
Integrated design for assembly methodology for electrical machines with distributed wound coils.
EngD thesis, University of Nottingham.
Ogunkeyede, Akinyemi Olufemi
(2016)
Conventional and microwave pyrolysis remediation of crude oil contaminated soil.
PhD thesis, University of Nottingham.
Ogunniran, Oluwatosin
(2017)
Microwave treatment of oil contaminated drill cuttings produced on offshore oil platforms.
EngD thesis, University of Nottingham.
Ojum, Chibuzor Kingsley
(2015)
The design and optimisation of cold asphalt emulsion mixtures.
PhD thesis, University of Nottingham.
Okafor, Obinna
(2020)
Mesoscale additively manufactured flow reactors for synthetic, crystallisation and biocatalytic applications.
PhD thesis, University of Nottingham.
Oladeji, Ayodele
(2015)
Numerical and experimental investigation of novel materials for laser and amplifier operations.
PhD thesis, University of Nottingham.
Olanrewaju, Olufisayo Abimbola
(2020)
Multidomain modelling of multichip SiC power modules.
PhD thesis, University of Nottingham.
Olarra, Aitor
(2019)
Calibration method and uncertainty propagation methodology for a portable parallel kinematic machine tool.
PhD thesis, University of Nottingham.
Omar, Rajab Abulgasem
(2017)
Transitional two-phase flow around 90° bends of different orientations.
PhD thesis, University of Nottingham.
Osorio-Sandoval, Carlos Arturo
(2021)
BIM-based construction simulation modelling.
PhD thesis, University of Nottingham.
Otaru, Abdulrazak Jinadu
(2018)
Fluid flow and acoustic absorption in porous metallic structures using numerical simulation and experimentation.
PhD thesis, University of Nottingham, United Kingdom.
Othman, Mohd Azlishah
(2013)
Sub-Terahertz: generation and detection.
PhD thesis, University of Nottingham.
Oti, Akponanabofa Henry
(2014)
Building information modelling for sustainability appraisal of conceptual design of steel-framed buildings.
PhD thesis, University of Nottingham.
Overton, James
(2017)
3-Dimensional alignment of micro components using liquid droplets.
PhD thesis, University of Nottingham.
Owoseni, Tunji Adetayo
(2021)
Development of nanostructured ceramic coatings from suspension and solution precursor thermal spraying process.
PhD thesis, University of Nottingham.
Oyelola, Olusola
(2020)
Machining of metal directed energy deposited components.
PhD thesis, University of Nottingham.
P
Pacella, Manuela
(2014)
Pulsed laser ablation of ultra-hard structures: generation of tolerant freeform surfaces for advanced machining applications.
PhD thesis, University of Nottingham.
Paleo Cageao, Paloma
(2014)
Fluid-particle interaction in geophysical flows: debris flow.
PhD thesis, University of Nottingham.
Palmer, David
(2016)
Control of navigation and feeding actions of a continuum arm for in-situ repair.
PhD thesis, University of Nottingham.
Pan, Qing
(2016)
Multi-scale modelling and material characterisation of textile composites for aerospace applications.
PhD thesis, University of Nottingham.
Panagiotou, Konstantina
(2018)
Design recommendations and sizing guidelines for small
scale grid-connected decentralised energy systems.
PhD thesis, University of Nottingham.
Pandey, Priyanka
(2017)
Quantification of nutrient uptake and allocation under phosphate stress in rice using ionomics techniques.
MRes thesis, University of Nottingham.
Papadopoulos, Savvas
(2017)
A hybrid power converter with enhanced switching ripple cancellation.
PhD thesis, University of Nottingham.
Papini, Luca
(2018)
Performance calculation of high speed solid rotor induction machine.
PhD thesis, University of Nottingham.
Parnell, Harriet
(2018)
Towards a Ge-Sb-Se/S hyperspectral imaging probe for early cancer diagnosis.
PhD thesis, University of Nottingham.
Parr, Jonathan
(2017)
A crowdsourcing approach to natural language automotive command interfaces.
PhD thesis, University of Nottingham.
Parry, Luke Alexander
(2018)
Investigation of residual stress in selective laser melting.
PhD thesis, University of Nottingham.
Partridge, Thomas J.
(2021)
Optimising route comfort indices for neonatal transfers by road.
PhD thesis, University of Nottingham.
Pasquale, Laura
(2017)
Robust feedback control of flow separation using plasma actuators.
PhD thesis, University of Nottingham.
Patel, Critesh
(2013)
Development of discontinuous fibre preforming processes.
PhD thesis, University of Nottingham.
Patel, Magdalena Maria
(2019)
Melt-processing of novel bioresorbable polymer nanocomposites for healthcare.
PhD thesis, University of Nottingham.
Patel, Rupesh
(2013)
Modelling analysis and optimisation of cantilever piezoelectric energy harvesters.
PhD thesis, University of Nottingham.
Patel, Uresha
(2017)
Manufacture and structural characterisation of novel resorbable phosphate-glass microspheres for bone repair applications.
PhD thesis, University of Nottingham.
Paternostro, Simone
(2018)
Integration of ARAIM technique for integrity performance prediction, procedures development and pre-flight operations.
PhD thesis, University of Nottingham.
Paul, Benjamin T.
(2019)
Additive manufacture of an in vitro neuron biosensor.
PhD thesis, University of Nottingham.
Pearson, Stephen R.
(2013)
The effect of nitriding on the fretting wear of a high strength steel at ambient and elevated temperatures.
PhD thesis, University of Nottingham.
Pedrozo-Acuña, Diego
(2013)
Numerical modelling of the sorting and transport of non-uniform sediments in the swash zone.
PhD thesis, University of Nottingham.
Peltola, Pekka
(2018)
Towards seamless pedestrian navigation.
PhD thesis, University of Nottingham.
Peng, Wenxuan
(2022)
Experimental and numerical investigations of deformation and fracture mechanisms in double-sided incremental forming.
PhD thesis, University of Nottingham.
Peppa, Ioulia Petroula
(2020)
Analysis of GNSS station dynamic motion using the multipath effect: analytical, experimental approach and application.
PhD thesis, University of Nottingham.
Pereira, Igor S. M.
(2013)
Microwave processing of oil contaminated drill cuttings.
PhD thesis, University of Nottingham.
Perera, Madhavie S.
(2015)
The use of sorbitol-initiated polylactic acid as a coupling agent in resorbable phosphate glass fibre reinforced polylactic acid composites.
PhD thesis, University of Nottingham.
Perez Cota, Fernando
(2016)
Opto-acoustic thin-film transducers for imaging of
Brillouin oscillations on living cells.
PhD thesis, University of Nottingham.
Perkins, Joseph A.
(2020)
Advanced image analysis to characterise coal and predict burnout potential.
EngD thesis, University of Nottingham.
Perrat, Bertrand
(2017)
Precise location measurement in indoor and outdoor performance sports.
PhD thesis, University of Nottingham.
Perrotta, Federico
(2019)
Exploring the impact of road surface conditions on truck fleet fuel consumption through Big Data.
PhD thesis, University of Nottingham.
Pettey, Angus
(2023)
A micromechanical investigation of soil-structure interface behaviour.
PhD thesis, University of Nottingham.
Pezeshki, Hamed
(2021)
Lab-on-a-chip technology platform for biophotonic applications.
PhD thesis, University of Nottingham.
Pfau, Sebastian A.
(2021)
Nanoscale characterisation of soot particulates from gasoline direct injection engines.
PhD thesis, University of Nottingham.
Phan, Thao Nhut Hong
(2019)
Designing social learning spaces: evaluating the relationship between perceptions of design quality and student experience in UK higher education.
PhD thesis, University of Nottingham.
Phang, Sendy
(2016)
Theory and numerical modelling of parity-time symmetric structures for photonics.
PhD thesis, University of Nottingham.
Photong, Chonlatee
(2013)
A current source inverter with series AC capacitors for transformerless grid-tied photovoltaic applications.
PhD thesis, University of Nottingham.
Piazera de Carvalho, Thiago
(2016)
Two-phase flow in open-cell metal foams with application to aero-engine separators.
PhD thesis, University of Nottingham.
Pierce-Brown, Jack
(2019)
Effective properties of randomly heterogeneous beams.
PhD thesis, University of Nottingham.
Pieris, Don
(2022)
Towards in-process inspection of additive manufacturing using laser ultrasonics.
EngD thesis, University of Nottingham.
Pillai, Udit
(2021)
Damage modelling in fibre-reinforced composite laminates using phase field approach.
PhD thesis, University of Nottingham.
Pires, Gustavo Menegusso
(2018)
A new methodology for the measurement of the reclaimed asphalt degree of binder activation.
PhD thesis, University of Nottingham.
Pitcher, Eleanor Grace
(2021)
Novel characterisation methods for pore systems of seal rocks in reservoirs used for downhole gas production and storage.
PhD thesis, University of Nottingham.
Polenta, Valerio
(2017)
Exploiting internal pressurisation to enhance structural properties.
PhD thesis, University of Nottingham.
Prasetyo, Ridwan Aji Budi
(2022)
Mental workload in aviation: an investigation of physiological and qualitative assessment methods.
PhD thesis, University of Nottingham.
Pu, Jing
(2021)
Parametric analysis of 3D printing of continuous carbon fibre with polyether ether ketone matrix using the fused filament fabrication process.
PhD thesis, University of Nottingham.
Q
Qian, Lingyi
(2017)
Fabrication, characterisation and oxidation behaviour of Pt-based bond coats for high temperature applications.
PhD thesis, University of Nottingham.
Qian, Qifeng
(2018)
Fundamental investigation for 3D reactive inkjet printing of bisphenol A-polycarbonate.
PhD thesis, University of Nottingham.
Qiao, Yaning
(2015)
Flexible pavements and climate change: impact of climate change on the performance, maintenance, and life-cycle costs of flexible pavements.
PhD thesis, University of Nottingham.
Qin, Zhengyuan
(2022)
Understanding the controls and mechanisms of coal mining-induced ground movement using numerical modelling and InSAR analysis.
PhD thesis, University of Nottingham.
Quinlivan, Aoife
(2023)
Driving towards a circular economy: evaluating the suitability of metal-organic frameworks for antibiotic removal and recovery from wastewater effluent.
PhD thesis, University of Nottingham.
R
Rabiu Ado, Muhammad
(2017)
Numerical simulation of heavy oil and bitumen recovery and upgrading techniques.
PhD thesis, University of Nottingham.
Rae, Yaroslav
(2020)
Characterisation and computational modelling of high temperature cyclic viscoplastic behaviour of turbine steel.
PhD thesis, University of Nottingham.
Ragab, Raheeg
(2024)
Computational modelling of creep and cyclic visco-plasticity damage of CSEF steels at elevated temperatures.
PhD thesis, University of Nottingham.
Rahman, Abdur
(2016)
The influence of social identity when digitally sharing location.
PhD thesis, University of Nottingham.
Rahman, Taqia
(2021)
Early-opening-to-traffic asphalt pavement for airfield rehabilitation.
PhD thesis, University of Nottingham.
Raimondi, Luca
(2021)
Towards the understanding of the transient behaviour and sources of variability on the process outcomes in inertia friction welding.
PhD thesis, University of Nottingham.
Raoof, Saad Mahmood
(2017)
Bond between textile reinforced mortar (TRM) and concrete substrate.
PhD thesis, University of Nottingham.
Raqib, Abdurrahman
(2022)
Real time monitoring of capacitor degradation in industrial variable speed drives.
PhD thesis, University of Nottingham.
Reeves, Jack David
(2018)
Sensor selection for fault diagnostics.
PhD thesis, University of Nottingham.
Rengaraj, Kishen
(2016)
Void growth mitigation in high heating rate Out-of-Autoclave processing of composites.
PhD thesis, University of Nottingham.
Renshaw, Ryan C.
(2017)
New insights into RF and microwave drying of foods.
PhD thesis, University of Nottingham.
Reyes Campaña, Héctor Rodrigo
(2019)
Generalised fleet maintenance modelling.
PhD thesis, University of Nottingham.
Reyes-Luna, Juan Francisco
(2023)
Inkjet printing digital image generation and compensation for surface chemistry effects.
PhD thesis, University of Nottingham.
Reyes-Moraga, Eduardo Felipe
(2015)
Predictive control of a direct series resonant converter with active output voltage compensation.
PhD thesis, University of Nottingham.
Reynolds, William J.
(2022)
Predicting melt pool behaviour in LPBF through high fidelity modelling.
PhD thesis, University of Nottingham.
Riccio, Jacopo
(2023)
Advance control of a synchronous reluctance motor drive.
PhD thesis, University of Nottingham.
Rix, Andrew Iain James
(2016)
Robust rotordynamics.
PhD thesis, University of Nottingham.
Rkiouak, Noura
(2020)
Investigation of large-scale structures in turbulent boundary layer and their detections by wall-based sensors array.
PhD thesis, University of Nottingham.
Roberts, Andrew P.
(2015)
The prevention of thermal losses from automotive lubricants to improve cold start efficiency.
PhD thesis, University of Nottingham.
Rocca, Roberto
(2020)
Actual design space methodology for high-performance switched reluctance machines design.
PhD thesis, University of Nottingham.
Rodriguez Oyarzun, Jose Miguel
(2019)
Scalable microwave applicators for high-temperature processing.
PhD thesis, University of Nottingham.
Roggia, Sara
(2018)
A two degrees of freedom permanent magnet conical motor.
PhD thesis, University of Nottingham.
Rojas Rivera, Concepcion del Carmen
(2020)
Place attachment in informal settlements: the influence of community leaders in Mexico.
PhD thesis, University of Nottingham.
Romano, Vincenzo
(2016)
Ionospheric scintillation effects on GNSS: monitoring and data treatment development.
PhD thesis, University of Nottingham.
Romlie, Mohd Fakhizan
(2014)
Impact of energy storage on the stability and transmission efficiency of a remote grid.
PhD thesis, University of Nottingham.
Rose, Christopher James
(2016)
An adaptive D-STATCOM control scheme utilising impedance estimation.
PhD thesis, University of Nottingham.
Rossoni, Luca
(2016)
Towards the bioproduction of methacrylic acid: a case study on the use of decarboxylases.
PhD thesis, University of Nottingham.
Roullier, Benjamin David
(2017)
Modelling the local environmental impact of underground coal gasification.
EngD thesis, University of Nottingham.
Rouse, James Paul
(2014)
Computational component analysis techniques for high temperature power plant applications.
PhD thesis, University of Nottingham.
Rovere, Luca
(2019)
SVPWM zero-sequence voltage elimination for the dual fed common dc-link open-end winding PMSM high-speed starter-generator.
PhD thesis, University of Nottingham.
Rowson, Matthew
(2021)
Understanding the evolution of superalloy microstructure during inertia friction welding using in-situ x-ray diffraction and cellular automata.
PhD thesis, University of Nottingham.
Russell, Justin
(2015)
Progressive collapse of reinforced concrete flat slab structures.
PhD thesis, University of Nottingham.
Russell, Scott H.
(2018)
Development of a carbon neutral process for producing renewable charcoal.
EngD thesis, University of Nottingham.
Ryan, John
(2022)
Polymer from pyrolysis liquid: pyrolymer.
PhD thesis, University of Nottingham.
Ryding, Joseph
(2016)
Assessing new methods for measuring forest understorey vegetation using terrestrial laser scanning.
PhD thesis, University of Nottingham.
S
Saadoon, Tahseen Diwan
(2019)
Understanding and improving cold bituminous emulsion mixtures.
PhD thesis, University of Nottingham.
Sabatini, Roberto
(2017)
A novel avionics based GNSS integrity augmentation system for manned and unmanned aircraft.
PhD thesis, University of Nottingham.
Saeed, Rasha
(2018)
Design and characterisation of a high energy-density inductor.
PhD thesis, University of Nottingham.
Safari, Saeed
(2015)
Impact of silicon carbide device technologies on matrix converter design and performance.
PhD thesis, University of Nottingham.
Safari Baghsorkhi, Mohammad
(2017)
Experimental investigation of the effect of the ballast/sleeper interventions on railway track performance.
PhD thesis, University of Nottingham.
Sakr, Hesham
(2016)
Towards mid-infrared fibre lasers: rare earth ion doped chalcogenide glasses and fibres.
PhD thesis, University of Nottingham, UK.
Salanitri, Davide
(2018)
Trust in virtual reality.
PhD thesis, University of Nottingham.
Salerno, Gervasio
(2018)
Process modelling of weld repair in aeroengine components.
PhD thesis, University of Nottingham.
Salgado, Vera Brito
(2023)
Study of knallgas C. metallidurans CH34 as microbial chassis for aerobic CO2 fixation.
PhD thesis, University of Nottingham.
Salih, Siham Idan
(2020)
Self-healing of cyclic loading damage in asphalt mixtures.
PhD thesis, University of Nottingham.
Salis, Valerio
(2019)
Stability analysis of AC power system in the linear time periodic framework.
PhD thesis, University of Nottingham.
Samad, Sabrin Abdus
(2022)
Developing porous microspheres for water treatment applications.
PhD thesis, University of Nottingham.
Sanchez, Salomé
(2022)
Creep behaviour of Laser Powder Bed Fused alloy 718.
PhD thesis, University of Nottingham.
Sanchez Melo, Diana B.
(2018)
Meso-scale rheological characteristics of foamed bitumen mixtures with high RAP content.
PhD thesis, University of Nottingham.
Sarce Thomann, Fernando
(2016)
Hygrothermal modelling as a top-down design tool for mesoporous desiccants.
PhD thesis, University of Nottingham.
Sattar, Rauf
(2016)
Exterior rotor permanent magnet generator in variable speed applications.
MPhil thesis, University of Nottingham.
Schindl, Alexandra
(2020)
Halophilic enzymes in alien environments.
PhD thesis, University of Nottingham.
Schneider, Nicolas
(2020)
Impact of a bearingless machine on a shaft's rotodynamics: control of a single winding bearingless machine.
PhD thesis, University of Nottingham.
Sciascera, Claudio
(2017)
Design of short time duty permanent magnet electrical machines.
PhD thesis, University of Nottingham.
Sen, Surojit
(2022)
A fast remotely operable digital twin of a generic electric powertrain for geographically distributed hardware-in-the-loop simulation testbed.
PhD thesis, University of Nottingham.
Senin, Nicola
(2018)
Feature-based characterisation of surface topography.
PhD thesis, University of Nottingham.
Serdaroglu, Gulcan
(2018)
Controlling the microstructure of the porous nickel electrodes in alkaline electrolysers.
PhD thesis, University of Nottingham.
Sewell, Anthony J.
(2017)
Crack propagation in high modulus asphalt mixtures.
PhD thesis, University of Nottingham.
Sferza, Massimo
(2023)
Global-local multidisciplinary optimisation of aircraft.
PhD thesis, University of Nottingham.
Sfoungaris, Konstantinos
(2022)
Wave-based numerical methods for damage identification in components and structures.
PhD thesis, University of Nottingham.
Shah, Darshil Upendra
(2013)
Characterisation and optimisation of the mechanical performance of plant fibre composites for structural applications.
PhD thesis, University of Nottingham.
Shaheen, Amrozia
(2021)
Development of a multi-view fringe projection system for coordinate metrology.
PhD thesis, University of Nottingham.
Shaikh, Shakil Ahmed
(2015)
Investigating the effects of physical and cognitive demands on quality of performance and subjective responses under pacing/ takt time.
PhD thesis, University of Nottingham.
Shaohong, Zhu
(2021)
Fractional slot concentrated winding PM synchronous motors for transport electrification applications.
PhD thesis, University of Nottingham.
Sharpe, Patrick
(2023)
Characterising natural ventilation through open windows in the presence of wind: a theoretical and experimental investigation into the interaction between window geometry and environmental forces, and its application to envelope flow models of natural ventilation.
PhD thesis, University of Nottingham.
Shen, Meili
(2019)
Pr3+-doped selenide-based chalcogenide glass mid-infrared fibre amplifier.
PhD thesis, University of Nottingham.
Shepherd, Benjamin John
(2020)
Development of a liquid inerted microwave pyrolysis process.
PhD thesis, University of Nottingham.
Sher, Farooq
(2017)
Design and operation of a 20 kWth fluidised bed combustor for biomass oxy-fuel combustion.
PhD thesis, University of Nottingham.
Shih Chieh, Lai
(2018)
A multiphase interleaved boost converter with coupled inductor for fuel cell APU applications.
PhD thesis, University of Nottingham.
Shukla, Yashvini
(2024)
Assessing mangrove canopy heights in Myanmar using GEDI & Sentinel-2 for effective monitoring.
MRes thesis, University of Nottingham.
Si, Yuqian
(2023)
On the use of swept frequency alternating current potential difference method and skin effect to detect feature geometry in flawed conductors.
PhD thesis, University of Nottingham.
Sidahmed, Shiemaa Sidhmed Awad
(2020)
Potential methods for heart rate monitoring during neonatal resuscitation in the delivery room.
PhD thesis, University of Nottingham.
Siddiq, Abdur Rahman
(2016)
A novel method for the fabrication of porous Poly-Ether-Ether-Ketone using sodium chloride as a porogen.
PhD thesis, University of Nottingham.
Silbernagel, Cassidy
(2019)
Investigation of the design, manufacture and testing of additively manufactured coils for electric motor applications.
PhD thesis, University of Nottingham.
Silvester, Laurence Paul Joseph
(2020)
Mineral transformation, ash formation and characterisation during pulverised fuel combustion.
EngD thesis, University of Nottingham.
Simm, Jonathan
(2015)
Direct action self-help groups in UK flood risk management.
PhD thesis, University of Nottingham.
Simmons, Daniel
(2016)
Hybrid methods for modelling advanced electromagnetic systems using unstructured meshes.
PhD thesis, University of Nottingham.
Sims-Waterhouse, Danny
(2020)
Camera-based close-range coordinate metrology.
PhD thesis, University of Nottingham.
Smid, Pieter Henry
(2019)
Aberration retrieval for laser scanning microscopy.
PhD thesis, University of Nottingham.
Smith, Bridget J.
(1995)
A complex ray approach to the acoustics of fluid-loaded structures.
PhD thesis, University of Nottingham.
Smith, Conor
(2023)
Characterisation of CrN-NbN Superlattice Coatings, including their simulated wear debris, for total joint prosthesis bearing surface applications.
PhD thesis, University of Nottingham.
Smith, Jacob
(2022)
A multi-faceted approach to dye remediation with layered double hydroxides, synthesised by continuous hydrothermal method.
PhD thesis, University of Nottingham.
Smith, Peter H.
(2022)
Magnetic assistance in laser powder directed energy deposition.
PhD thesis, University of Nottingham.
Smith, Thomas Anthony
(2021)
Optimised task allocation using dynamic production data in human-robot teams.
PhD thesis, University of Nottingham.
Soejadi, Prijoko Prajitnoadi
(2018)
Participatory ergonomics in Indonesian tin mining.
PhD thesis, University of Nottingham.
Sohouenou, Philippe
(2022)
Assessing the role of network topology, demand variations and recovery strategies in road network resilience.
PhD thesis, University of Nottingham.
Solomon, Adane Kassa
(2015)
Advanced packaging and integration solutions for enhanced performance power convertors.
PhD thesis, University of Nottingham.
Song, Bo
(2018)
Thermal spray and laser cladding of nickel-chromium coatings for high temperature applications.
PhD thesis, University of Nottingham.
Song, Geyang
(2019)
The use of protective structures to reduce tunnelling induced damage to buildings.
PhD thesis, University of Nottingham.
Song, Longfei
(2018)
Leading-edge flow separation control over a NACA 0012 aerofoil with DBD plasma actuators.
PhD thesis, University of Nottingham.
Song, Shuang and Oc, T.
(2013)
The effectiveness of regeneration policy in historic urban quarters in England (1997-2010).
PhD thesis, University of Nottingham.
Song, Wenping
(2018)
An investigation of MMC based DC/DC converter for HVDC grids.
PhD thesis, University of Nottingham.
Song, Yang
(2014)
Intelligent PID controller based on fuzzy logic control and neural network technology for indoor environment quality improvement.
PhD thesis, University of Nottingham.
Soorani, Mitra
(2018)
Needle-based ultrasonic diagnostic tool.
MPhil thesis, University of Nottingham.
Spadoni, Damiano
(2022)
Computational investigation on the mechanism of oxygen tolerance in the radical SAM enzyme lysine 2,3-aminomutase.
PhD thesis, University of Nottingham.
Spagnolo, Cosimo
(2022)
Analytical approach to electrical distribution systems for aircraft.
PhD thesis, University of Nottingham.
Spampinato, Alessio
(2018)
Dressing tools with controlled abrasive grain population for grinding aerospace materials.
PhD thesis, University of Nottingham.
Spanakos, Dimitrios
(2022)
Novel methods of enhanced hydrocarbon recovery.
PhD thesis, University of Nottingham.
Speidel, Alistair
(2018)
Novel surface generation and characterisation by electrochemical jet processing.
PhD thesis, University of Nottingham.
Spirrett, Fiona
(2021)
Investigations into glass additive manufacturing by selective laser melting and directed energy deposition.
PhD thesis, University of Nottingham.
Sprinks, James C.
(2017)
Designing task workflows to ensure the best scientific outcomes in citizen science.
PhD thesis, University of Nottingham.
Starkey, Christopher L.
(2016)
Continuous-flow hydrothermal and solvothermal synthesis of inorganic nanomaterials.
PhD thesis, University of Nottingham.
Starkie, Christopher
(2016)
The design, synthesis and characterisation of amine
functionalised silica adsorbents for post combustion
carbon capture.
EngD thesis, University of Nottingham.
Stephenson, Scott
(2016)
Automotive applications of high precision GNSS.
PhD thesis, University of Nottingham.
Stevenson, Alicia
(2018)
A cost model of part consolidation for additive manufacturing.
EngD thesis, University of Nottingham.
Stevenson, Anthony John
(2017)
Development of a novel electrochemical pyroprocessing methodology for spent nuclear fuels.
PhD thesis, University of Nottingham.
Stiles, Shelley
(2019)
Investigation of safety leadership within infrastructure engineering construction projects.
PhD thesis, University of Nottingham.
Still, Kristoffer
(2018)
Enzyme focused process engineering: evaluating the influence of complex process environments on enzyme activity.
PhD thesis, University of Nottingham.
Stirling, Robert John
(2019)
An investigation into the impact of hydrothermal
carbonisation on the suitability of biomass for fuel
switching.
EngD thesis, University of Nottingham.
Stoesslein, Moritz
(2016)
Method for in-situ balancing of rotatives by use of an on-the-fly pulsating material removal process.
PhD thesis, University of Nottingham.
Stowell, Paul A.
(2020)
Short term, low strain radial tensile stiffness of a triaxial geogrid with integral junctions.
MPhil thesis, University of Nottingham.
Stoyanov, Miroslav
(2013)
Investigation of small punch creep testing.
PhD thesis, University of Nottingham.
Stratta, Andrea
(2022)
Heterogeneous integration of WBG devices and magnetic components: manufacturing and design optimisation.
PhD thesis, University of Nottingham.
Strong, Christopher
(2023)
Design and development of a novel plant cuticle model using 3D printing.
PhD thesis, University of Nottingham.
Stuart, Bryan W.
(2017)
Deposition and characterisation of RF magnetron sputtered phosphate based glasses.
PhD thesis, University of Nottingham.
Sturgess, Craig
(2018)
Fully reactive 3D inkjet printing of polydimethylsiloxane and polyurethane.
PhD thesis, University of Nottingham.
Subhy, Ayad Tareq
(2017)
Characterisation and development of rubberised bitumen and asphalt mixture based on performance-related requirements.
PhD thesis, University of Nottingham.
Suchato, Nutthawut
(2019)
Ultrasonic instrumentation for accurate real time corrosion monitoring using permanently installed transducers.
PhD thesis, University of Nottingham.
Sumner, Aaran
(2018)
New production methods for salient pole rotor manufacture.
EngD thesis, University of Nottingham.
Sumsurooah, Sharmila
(2017)
Robust stability analysis of power electronic systems.
PhD thesis, University of Nottingham.
Sun, Yuan
(2018)
Development, characterisation and evaluation of novel approaches to improve the lifetime performance of amine-based materials for carbon capture in power plants.
PhD thesis, University of Nottingham.
Susi, Melania
(2017)
Improved receiver tracking models for scintillation monitoring.
PhD thesis, University of Nottingham.
Sutherland, Neil
(2021)
Multi-temporal, multi-sensor land use/land cover mapping: Google Earth Engine and Random Forest for the classification of the Scottish flow country.
MRes thesis, University of Nottingham.
Swaisi, Mahmoud
(2017)
DC distribution grid and the associated advanced DC/DC converter.
PhD thesis, University of Nottingham.
SÉLO, Richard Roger Joachim
(2022)
Thermal properties of lattice structures by laser powder bed fusion for aerospace systems.
PhD thesis, University of Nottingham.
Sánchez Valencia, Andrea
(2018)
Polystyrene blends: a rheological and solid-state study of the role of molecular weight distribution.
PhD thesis, University of Nottingham.
T
Tan, Bo
(2017)
Nondestructive evaluation of thermal barrier coatings.
PhD thesis, University of Nottingham.
Tang, Fangyan
(2016)
Cultural differences in product design between the UK and China.
PhD thesis, University of Nottingham.
Tang, Mi
(2017)
Torque ripple reduction in a.c. permanent magnet servo motor drives.
PhD thesis, University of Nottingham.
Tang, Selina Vi Yu
(2014)
Synthesis of nanomaterials for biomedical applications.
PhD thesis, University of Nottingham.
Tang, Yunpeng
(2017)
A novel N-phase multi-modular series HVDC tap.
PhD thesis, University of Nottingham.
Taqi, Ali A. M. A.
(2022)
Understanding the influence of microwave heating on biomass-solvent extraction.
PhD thesis, University of Nottingham.
Tejero Martin, Daniel
(2022)
Processing, microstructure, properties and performance of thermal sprayed ceramic coatings from powder, suspension and solution precursor.
PhD thesis, University of Nottingham.
Tekieli, Katarzyna
(2019)
A novel hollow cylinder apparatus to investigate shearing characteristic of asphalt.
PhD thesis, University of Nottingham.
Teo, Yu Xian
(2013)
Modelling of interconnects including coaxial cables and multiconductor lines.
PhD thesis, University of Nottingham.
Termtanun, Mutsee
(2013)
Photocatalytic degradation of pesticides using TiO2 nanoparticles.
PhD thesis, University of Nottingham.
Tetta, Zoi
(2017)
Shear strengthening of concrete members with Textile Reinforced Mortar (TRM).
PhD thesis, University of Nottingham.
Thew, Robert
(1982)
The geometrical non-linear response of some pre-tensioned cable structures.
PhD thesis, University of Nottingham.
Thomas, George
(2022)
Fluidity development of coking coal.
EngD thesis, University of Nottingham.
Thomas, Kathryn G.
(2020)
Phosphate based glass thin films for biofilm prevention in orthopaedic implants.
PhD thesis, University of Nottingham.
Thomas-Hillman, Ieuan
(2021)
Large scale microwave synthesis of Metal-Organic Frameworks.
PhD thesis, University of Nottingham.
Thompson, Adam
(2019)
Surface texture measurement of metal additively manufactured parts by X-ray computed tomography.
PhD thesis, University of Nottingham.
Thompson, Matthew
(2023)
Geometrical modelling of braided textiles.
PhD thesis, University of Nottingham.
Thomson, Ross John
(2017)
The psychosocial impact of home use medical devices.
PhD thesis, University of Nottingham.
Tilley, Clemency
(2022)
Understanding carbon flux of a heterologous metabolic pathway in Escherichia coli for sustainable methyl methacrylate biosynthesis.
PhD thesis, University of Nottingham.
Todhunter, Luke
(2020)
Surface topography analysis software validation.
EngD thesis, University of Nottingham.
Topliss, Bethan
(2023)
Look Here! Measuring the Attentional Demand of Near-Future Full Windshield Vehicle Displays.
PhD thesis, University of Nottingham.
Traiforos, Neoklis
(2023)
Process induced distortions of composite structures.
PhD thesis, University of Nottingham.
Transi, Tommaso
(2023)
Design and optimization of electrical machines with high anisotropy for transport applications.
PhD thesis, University of Nottingham.
Trupia, Laura
(2018)
System boundary expansion in road pavement life cycle assessment.
PhD thesis, University of Nottingham.
Tudor, James
(2023)
Automatic control of manufacturing variation propagation.
PhD thesis, University of Nottingham.
Turner, Adam James
(2015)
Application of CFD to model an aeroengine internal gearbox.
PhD thesis, University of Nottingham.
Turner, Paul
(2016)
Deformation and collapse of orthogonal 3D woven composites:
quasi-static and impact loading.
PhD thesis, University of Nottingham.
Tutton, Charlotte Eliza
(2024)
Investigating the use of torrefied biochar in agriculture for carbon sequestration.
EngD thesis, University of Nottingham.
Tweedy, Oliver
(2021)
Multi-physics modelling of a grid connected diesel engine driven synchronous generator set for the analysis of transient low voltage ride through performance.
PhD thesis, University of Nottingham.
U
Uguna, Jacob Onyebuolise
(2016)
Maturity, oil source rock and retorting potential of perhydrous coals in the Central Tertiary Basin, Spitsbergen.
PhD thesis, University of Nottingham.
Ure, Alexander David
(2017)
Understanding the influence of mineralogy and microwave energy input on the microwave treatment of copper ores.
PhD thesis, University of Nottingham.
Urrutia-Ortiz, Matias A.
(2022)
Control of the modular multilevel matrix converter based on
continuous control set model predictive control.
PhD thesis, University of Nottingham.
Uthayasuriyan, Arasan
(2022)
Advanced vibro-acoustic condensed models for multi-layer structures.
PhD thesis, University of Nottingham.
V
Vagnoli, Matteo
(2019)
Railway bridge condition monitoring and fault diagnostics.
PhD thesis, University of Nottingham.
Vaithilingam, Jayasheelan
(2015)
Additive manufacturing and surface functionalisation of Ti6Al4V components using self-assembled monolayers for biomedical applications.
PhD thesis, University of Nottingham.
Valman, Sam
(2021)
An assessment of the potential for cloud computing and satellite thermal infrared sensing to produce meaningful river temperature insights for hydropower operations.
MRes thesis, University of Nottingham.
Vasques, João
(2018)
Investigation of interfacial gas-liquid flows using the brightness based laser induced fluorescence technique.
PhD thesis, University of Nottingham.
Vazquez-Peraita, Lola
(2022)
Towards sustainable energy and fuels from waste pathways for the UK.
EngD thesis, University of Nottingham.
Velasco Carrasco, Mariana
(2022)
Innovative composite materials for heating, cooling and humidity control.
PhD thesis, University of Nottingham.
Velzen, Jeena
(2017)
Anaesthetic rooms: a systems approach to improving design and practice in the United Kingdom.
PhD thesis, University of Nottingham.
Vernon, Kris
(2014)
A photographic probe for wet steam.
EngD thesis, University of Nottingham.
Vidales Herrera, Jessica Vidales
(2023)
Microwave-assisted polymer synthesis of polycondensation materials for high performance coatings.
PhD thesis, University of Nottingham.
Vijayagopal, Manjusha
(2017)
Advanced control techniques for a direct matrix converter.
PhD thesis, University of Nottingham.
Vileiniskis, Marius
(2015)
Fault detection and diagnosis methods for engineering systems.
PhD thesis, University of Nottingham.
Vongurai, Rawin
(2013)
Development of digital filtering techniques in three-dimensional TLM models.
PhD thesis, University of Nottingham.
W
Wadge, Matthew D.
(2020)
Developing unique nanoporous titanate structures for biomedical applications: mechanisms, conversion and substitution.
PhD thesis, University of Nottingham.
Waheeb, Sahl Abdullah
(2006)
Impact of shading devices on indoor sunlight distribution and building energy performance, with reference to Saudi Arabia.
PhD thesis, University of Nottingham.
Wakerley, James Kenneth Malcolm
(2023)
Material discovery and modelling for solid-state hydrogen storage and fuel cell applications.
PhD thesis, University of Nottingham.
Waldron, Julie A.
(2018)
Human behaviour outdoors and the environmental factors.
PhD thesis, University of Nottingham.
Walker, Adam
(2017)
Design of a high performance machine with an innovative cooling method to achieve the FreedomCar 2020 traction machine targets.
PhD thesis, University of Nottingham.
Walker, David
(2019)
Advanced steam measurement techniques: a study of how electrical capacitance measurements are affected by the spatial positioning of water within wet steam.
EngD thesis, University of Nottingham.
Walker, Edward
(2014)
Continuous flow microwave catalytic chain transfer polymerisation of methyl methacrylate oligomers.
PhD thesis, University of Nottingham.
Walker, Rachel Z.
(2022)
A hyperspectral approach to understand the association between PSM (as measured by InSAR data) and vegetation assemblage for a Scottish peatland.
MRes thesis, University of Nottingham.
Wallgrén, Kirsi
(2005)
Novel amperometric gas sensors.
PhD thesis, University of Nottingham.
Walters, Joseph. G
(2023)
Rural implementation of connected, autonomous and electric vehicles.
PhD thesis, University of Nottingham.
Walton, Kirsty E.
(2018)
The continuous manufacture of dispersant coated bioresorbable nanoparticles.
PhD thesis, University of Nottingham.
Wan Zaki, Wan Suhaimizan
(2020)
Monitoring the pulse arrival time using optical fibre sensors.
PhD thesis, University of Nottingham.
Wang, Bo
(2023)
Design and study on fault tolerant permanent magnet starter-generator for more electric aircraft application.
PhD thesis, University of Nottingham.
Wang, Cheng
(2021)
Power quality improvement of electrical power systems within more electric aircraft.
PhD thesis, University of Nottingham.
Wang, Han
(2024)
Investigation of production planning for environmental sustainability improvement in polymer LPBF.
PhD thesis, University of Nottingham.
Wang, Jing
(2016)
Investigation of rare earth-doped ceramics as thermal barrier coating materials.
PhD thesis, University of Nottingham.
Wang, Kaiyang
(2018)
Ring opening polymerisation of ɛ-caprolactone using microwave electric and magnetic heating.
PhD thesis, University of Nottingham.
Wang, Kunpeng
(2022)
A modular co-simulation approach for urban energy systems.
PhD thesis, University of Nottingham.
Wang, Qian
(2015)
Analysing and evaluating a thermal management solution via heat pipes for lithium-ion batteries in electric vehicles.
PhD thesis, University of Nottingham.
Wang, Xin
(2023)
Optimized operational control for an electric power system on more electric aircraft.
PhD thesis, University of Nottingham.
Wang, Yun
(2016)
Characterization and reliability of Ag nanoparticle sintered joint for power electronics modules.
PhD thesis, University of Nottingham.
Wang, Yunlu
(2023)
Assessing sustainable urbanism in emerging Chinese Edge Cities: the case Of Beijing.
PhD thesis, University of Nottingham.
Wang, Zi
(2021)
Aeroelastic modelling and analyses of a short wing-propeller configuration.
PhD thesis, University of Nottingham.
Ward, Michael
(2018)
Mechanical and structural performance of melt-processable bioresorbable engineering nanocomposites.
PhD thesis, University of Nottingham.
Warfsmann, Jan
(2019)
Sustainable metal organic framework thin-films for medical sensing applications.
PhD thesis, University of Nottingham.
Watts, Julie A.
(2019)
Investigations of hollow carbon nanoshell structures.
PhD thesis, University of Nottingham.
Weilhard, Andreas Sebastian
(2019)
Novel catalytic systems for carbon dioxide activation.
PhD thesis, University of Nottingham.
Weir Vargas, Ana I.
(2022)
Production and characterisation of waste lignin and biodiesel-derived residues as potential bitumen modifiers.
EngD thesis, University of Nottingham.
Wells, Nicholas
(2019)
Linear analysis of incidence structure: applications in non-rigid object recognition.
PhD thesis, University of Nottingham.
Welsh, B.S.
(1993)
High speed deformation and break-up of shaped charge jets.
PhD thesis, University of Nottingham.
Wen, Wu
(2019)
Characterisation of high temperature coatings by miniature specimen testing and inverse approaches.
PhD thesis, University of Nottingham.
Werner, Thomas C.
(2021)
Investigation of novel analytical tools and experimental methods for the development of intermediate temperature heat pipes.
EngD thesis, University of Nottingham.
White, Jennifer A.
(2014)
An investigation into the parameters that contribute to the gap between the designed and as-built thermal performance
of British housing.
PhD thesis, University of Nottingham.
Williams, Hannah Elizabeth
(2015)
Uncertainty in the prediction of overtopping parameters in numerical and physical models due to offshore spectral boundary conditions.
PhD thesis, University of Nottingham.
Williams, James
(2016)
The mind, the brain, and systemic functional linguistics.
PhD thesis, University of Nottingham.
Williams, Orla
(2016)
On biomass milling for power generation.
EngD thesis, University of Nottingham.
Woods, Emma
(2022)
Investigating the use of two-photon polymerisation for the creation of gradient index optics.
PhD thesis, University of Nottingham.
Woods, Lois
(2018)
Children's perspectives of primary school environments.
PhD thesis, University of Nottingham.
Woodward, Alison Francesca
(2017)
Laccase-catalysed depolymerisation of lignin model oligomers.
PhD thesis, University of Nottingham.
Wu, Jindong
(2015)
Thermal comfort and occupant behaviour in office buildings in south-east China.
PhD thesis, University of Nottingham.
Wu, Mengjuan
(2023)
Study on multi-phase structured icephobic constructions.
PhD thesis, University of Nottingham.
X
Xiao, Qiong
(2017)
The loading path dependence of sand constitutive behaviour and its relationship with pressure dip in sand piles.
PhD thesis, University of Nottingham.
Xiao, Zhaofei
(2018)
Advancements in discontinuous carbon fibre composite technologies for high-volume manufacturing processes.
PhD thesis, University of Nottingham.
Xu, Dong-dong
(2019)
Machinability and surface integrity investigation of Ni-based aerospace superalloys based on energy thresholds investigation and innovative pendulum-based machining.
PhD thesis, University of Nottingham.
Xu, Fei
(2018)
The effect of viscoelasticity and damage in relation to the
acceleration of fatigue and creep testing of composites
using time-temperature superposition.
PhD thesis, University of Nottingham.
Xu, Haipeng
(2019)
The use of PCMs for free cooling in buildings.
PhD thesis, University of Nottingham.
Xu, Qi
(2021)
Novel window thermoelectric module integration systems for building applications.
PhD thesis, University of Nottingham.
Xue, Chenyu
(2022)
Assessment of the performance of low-cost GNSS receivers for deformation monitoring application.
PhD thesis, University of Nottingham.
Y
Yan, Jiayi
(2019)
Finite element implementation of Koiter's initial post-buckling analysis.
PhD thesis, University of Nottingham.
Yan, Shibo
(2017)
Design optimisation of 3D woven reinforcements with geometric features.
PhD thesis, University of Nottingham.
Yang, Chao
(2013)
Highway asset management.
PhD thesis, University of Nottingham.
Yang, Deyu
(2023)
Microstructure and surface design for highly efficient ice mitigation.
PhD thesis, University of Nottingham.
Yang, Lintao
(2013)
Experimental study of soil anisotropy using hollow cylinder testing.
PhD thesis, University of Nottingham.
Yang, Yang
(2018)
Porous scaffolds and soft hydrogel scaffolds for soft tissue engineering.
PhD thesis, University of Nottingham.
Yang, Yu
(2016)
A numerical study of damage mechanisms in the CAI of laminated composites for aerospace applications.
PhD thesis, University of Nottingham.
Yao, Jiawei
(2016)
The influence of tall buildings on the pedestrian level micro-climate in Lujiazui New District, Shanghai.
PhD thesis, University of Nottingham.
Yaqub, Imran
(2015)
Investigation into stable failure to short circuit in IGBT power modules.
PhD thesis, University of Nottingham.
Yates, Matthew
(2018)
The measurement of particle dispersions in turbulent, four-way coupled flows.
PhD thesis, University of Nottingham.
Yehia, Ziyad Khamis Mohammad
(2020)
The VI Nav cards: a holistic approach to supporting the design of navigation aids for the blind and visually impaired.
PhD thesis, University of Nottingham.
Yeoh, Seang Shen
(2016)
Control strategies for the More Electric Aircraft starter-generator electrical power system.
PhD thesis, University of Nottingham.
Yiakoumetti, Andrew
(2016)
The production of methacrylic acid in Escherichia coli.
PhD thesis, University of Nottingham.
Yianni, Panayioti C.
(2017)
A modelling approach to railway bridge asset management.
PhD thesis, University of Nottingham.
Younis, Alhammali A.A.
(2016)
Microstructure, mechanical properties and sliding wear behaviour of thermally sprayed cermet coatings.
PhD thesis, University of Nottingham.
Yu, Fei
(2022)
The prediction of wrinkle formation in non-crimp fabrics during double diaphragm forming.
PhD thesis, University of Nottingham.
Yu, Ji
(2016)
Railway trackbed deterioration.
PhD thesis, University of Nottingham.
Yu, Tianhong
(2016)
Continuum damage mechanics models and their applications to composite components of aero-engines.
PhD thesis, University of Nottingham.
Yue, Peng
(2016)
A micro mechanical study of critical state soil mechanics using DEM.
PhD thesis, University of Nottingham.
Z
Zabidi, Adi Zakwan
(2019)
Computational mechanical characterisation of Schwarz P unit cell-based tissue scaffolds fabricated via two-photon polymerisation.
PhD thesis, University of Nottingham.
Zacharzewski, Piotr
(2023)
Improving accuracy and efficiency of CFD simulations of
complex geometry and high-Re turbine blade cooling systems.
PhD thesis, University of Nottingham.
Zaidi, Syed Bilal Ahmed
(2018)
The influence of hydrated lime on moisture susceptibility of asphalt mixtures.
PhD thesis, University of Nottingham.
Zangrossi, Francesco
(2021)
R&D of carbon nanotubes based nanocomposites for self-heating and de-icing applications.
PhD thesis, University of Nottingham.
Zapata Hendriquez, Patricio Alfredo
(2019)
Bioproduction of styrene from renewable feedstocks using ionic liquids as solvents for in situ product removal.
PhD thesis, University of Nottingham.
Zeng, Guohan
(2018)
A micromechanical study of unsaturated granular material using DEM simulation and X-ray CT.
PhD thesis, University of Nottingham.
Zhang, Bei
(2013)
Confocal surface plasmon microscopic sensing.
PhD thesis, University of Nottingham.
Zhang, Fan
(2015)
Theoretical examinations of optical tomography through scattering medium.
PhD thesis, University of Nottingham.
Zhang, Jiawei
(2019)
Open circuit fault detection and diagnosis on matrix converter systems.
PhD thesis, University of Nottingham.
Zhang, Jizhe
(2016)
Moisture damage of aggregate-bitumen bonds.
PhD thesis, University of Nottingham.
Zhang, Qimei
(2016)
Ultrasound mediated luminescence tomography using contrast agents.
PhD thesis, University of Nottingham.
Zhang, Shihao
(2022)
The development of a low carbon prefabricated house.
PhD thesis, University of Nottingham.
Zhang, Yang
(2016)
Development of BDD models for decision support in phased mission systems.
PhD thesis, University of Nottingham.
Zhang, Yuwu
(2018)
Dynamic response of high-performance honeycomb cores and hybrid fibre composite laminates for lightweight sandwich structures.
PhD thesis, University of Nottingham.
Zhang, Zhe
(2019)
Silent switching: EMI suppression without conventional EMI filters.
EngD thesis, University of Nottingham.
Zhang, Zhewen
(2019)
Modelling wire problems using the unstructured transmission line modelling method.
PhD thesis, University of Nottingham.
Zhao, Ge
(2020)
Processing of open-cell structures by additive manufacturing technique of metal and salt mixtures.
MPhil thesis, University of Nottingham.
Zhao, Lei
(2023)
GPS/Galileo Precise Point Positioning and its integration with Inertial Navigation System.
PhD thesis, University of Nottingham.
Zhao, Xiantao
(2018)
Multi-scale study of RTM process modelling in the manufacturing of aerospace composites.
PhD thesis, University of Nottingham.
Zheng, Xiaofeng
(2013)
Exploration and development of domestic thermoelectric cogeneration system.
PhD thesis, University of Nottingham.
Zhou, Bo
(2015)
Tunnelling-induced ground displacements in sand.
PhD thesis, University of Nottingham.
Zhou, Hang
(2016)
Modelling and experimental study of PV cells in lens-walled CPC PV system.
PhD thesis, University of Nottingham.
Zhou, Jie
(2021)
Establishing the evaluation framework of Underground Public Space Quality Assessment (UPSQA).
PhD thesis, University of Nottingham.
Zhou, Yuchen
(2018)
On modelling and experimentation of planar grinding using abrasive pads with grits of defined geometries and distributions for enabling controlled surface texture.
PhD thesis, University of Nottingham.
Zhu, Chenkai
(2016)
Scale-up manufacture and characterisation of resorbable phosphate based glass fibre for textile production.
PhD thesis, University of Nottingham.
Zhu, Hui
(2023)
Analytical and experimental investigation of incremental sheet forming of thermoplastics.
PhD thesis, University of Nottingham.
Zhu, Tengtuo
(2022)
A model for the role of debris ejection in development of fretting wear.
PhD thesis, University of Nottingham.
Zhuang, Peizhi
(2017)
Cavity expansion analysis with applications
to cone penetration test and root-soil interaction.
PhD thesis, University of Nottingham.
Ziegelmeier, Stefan
(2016)
Process analysis and material behavior of thermoplastic elastomers throughout the laser sintering processing chain.
PhD thesis, University of Nottingham.
Zou, Zhiyi
(2020)
Refinement of the grain structure of selective laser melted Ti-6Al-4V via induction heat treatment.
PhD thesis, University of Nottingham.
Zurawski, Michal
(2022)
Quantification of bacterial growth within orthopaedic scaffolds and assessment of the efficacy of antibacterial surface treatments.
PhD thesis, University of Nottingham.
This list was generated on Sat Nov 23 16:21:33 2024 UTC.
