• Login
• Admin

A

Achamfuo-Yeboah, Samuel Osei (2012) Design and implementation of a CMOS Modulated Light Camera. PhD thesis, University of Nottingham.

Afroze, Nadia (2023) Optical fibre CO2 sensing for monitoring the effects of tissue loading. PhD thesis, University of Nottingham.

Agbedahunsi, Alex Taiwo (2013) Frequency control for microgrids using enhanced STATCOM and supercapacitor energy storage. PhD thesis, University of Nottingham.

Ajayi, Ajibola (2008) Direct computation of statistical variations in electromagnetic problems. PhD thesis, University of Nottingham.

Akhtarzad, Sina (1975) Analysis of lossy microwave structures and microstrip resonators by the TLM method. PhD thesis, University of Nottingham.

Akpolat, Zuhtu Hakan (1999) Application of fuzzy-sliding mode control and electronic load emulation to the robust control of motor drives. PhD thesis, University of Nottingham.

Al-Ahmadi, Noorah Ahmed (2011) Investigation of the electrical properties of III-V semiconductor doped with Mn. PhD thesis, University of Nottingham.

Aladeloba, Abisayo Olufemi (2013) Optically amplified free-space optical communication systems. PhD thesis, University of Nottingham.

Almaleki, Masoud (2011) Sliding mode observation of capacitor voltage in multilevel power converters. PhD thesis, University of Nottingham.

Alsadi, Majid Hamid Nassar (2012) Modelling of electromagnetic material properties at microwave frequencies. PhD thesis, University of Nottingham.

Alwadie, Hatim (2024) High-performance machine design for propulsion and on-board integrated battery charger for a heavy-duty commercial electric vehicle. PhD thesis, University of Nottingham.

Amankwah, Emmanuel K. (2013) A parallel hybrid modular multilevel converter for high voltage DC applications. PhD thesis, University of Nottingham.

Amara, Fatima (2024) Control limitations of a cascaded H-bridge converter in solid-state substation applications. PhD thesis, University of Nottingham.

Amuzuvi, Christian Kwaku (2010) Characterisation, emulation and by-emitter degradation analysis of high power semiconductor laser diodes. PhD thesis, University of Nottingham.

Arca, Ahmet (2010) The design and optimisation of nanophotonic devices using the Finite Element Method. PhD thesis, University of Nottingham.

Areerak, Kongpan (2009) Modelling and stability analysis of aircraft power systems. PhD thesis, University of Nottingham.

Arumugam, Puvaneswaran (2013) Design and modelling of permanent magnet machine's windings for fault-tolerant applications. PhD thesis, University of Nottingham.

B

Basford, M.J. (2021) Robust, high-speed intra-vehicular communication networks for the vehicles of tomorrow. PhD thesis, University of Nottingham.

Bateman-Price, Thomas (2023) Applied optically detected magnetic resonance microscopy of nitrogen-vacancy defects in diamond. PhD thesis, University of Nottingham.

Belghoraf, A. (1984) Analysis of the tapered waveguide. PhD thesis, University of Nottingham.

Bener, Omer Faruk (2010) Synchronisation of vascular ultrasonic scans with heart activity using ECG signals. MPhil thesis, University of Nottingham.

Biwojno, Konrad P. (2006) Embedding of fine features in multi-scale electromagnetic models. PhD thesis, University of Nottingham.

Blasco Giménez, Ramón (1995) High performance sensorless vector control of induction motor drives. PhD thesis, University of Nottingham.

Bottomley, Jack S. (2014) Self-sensing permanent magnet servo motors. PhD thesis, University of Nottingham.

Butt, David (1999) An investigation of harmonic correction techniques using active filtering. PhD thesis, University of Nottingham.

C

Carpenter, James (2014) Low bandwidth laser doppler blood flowmetry. PhD thesis, University of Nottingham.

Chen, Jingsi (2010) Towards single photon detection with a practical EMCCD. MSc(Res) thesis, University of Nottingham.

Chen, Rui (2013) Novel particle sizing techniques. PhD thesis, University of Nottingham.

Chen, Yinghui (2007) Ultrasonic wave propagation in concentrated emulsions and encapsulated emulsions. PhD thesis, University of Nottingham.

Choi, Rebecca (2015) Design and characterisation of a label free evanescent waveguide microscope. MPhil thesis, University of Nottingham.

Chuang, Chin-Jung (2011) Proximity projection grating structured illumination microscopy. PhD thesis, University of Nottingham.

Clark, Nicholas R (2011) The role of temporal and spectral cues in the temporal integration of pitch and in pitch-based segregation of sound sources. PhD thesis, University of Nottingham.

Coggins, David Paul (2010) Single-ended traveling wave fault location on radial distribution lines. PhD thesis, University of Nottingham.

Craven, Michael P. (1994) Inter-chip communications in an analogue neural network utilising frequency division multiplexing. PhD thesis, University of Nottingham.

Crittenden, Mark E. (1997) Real-time intrapartum fetal electrocardiogram analysis. PhD thesis, University of Nottingham.

Crowley, Jane (2023) Spatial frequency domain imaging towards improved detection of gastrointestinal cancers. PhD thesis, University of Nottingham.

D

Daemi, M.F. (1990) Information theory and pattern recognition. PhD thesis, University of Nottingham.

Damianou., Damianos. (1995) The wavelength dependence of the photoplethysmogram and its implication to pulse oximetry. PhD thesis, University of Nottingham.

Dantanarayana, Harshana G. (2012) Application of TLM for optical microresonators. PhD thesis, University of Nottingham.

De Lillo, Liliana (2006) A matrix converter drive system for an aircraft rudder electro-mechanical actuator. PhD thesis, University of Nottingham.

Degano, Marco (2012) EMI filter design for matrix converters in airspace applications. PhD thesis, University of Nottingham.

Deng, Wenjuan (2014) A high-performance hardware architecture of an image matching system based on the optimised SIFT algorithm. PhD thesis, University of Nottingham.

Dewar, David N (2021) The optimal control of power electronic embedded networks in More Electric Aircraft. PhD thesis, University of Nottingham.

Dong, Peiliang (2009) On-chip ultra-fast data acquisition system for optical scanning acoustic microscopy using 0.35um CMOS technology. PhD thesis, University of Nottingham.

Dryburgh, Paul (2022) Inspection of additively manufactured components by spatially resolved acoustic spectroscopy. EngD thesis, University of Nottingham.

Duan, Yu (2012) A comparison of saliency based sensorless control techniques for a PM machine. PhD thesis, University of Nottingham.

Duffy, Alistair Paul (1993) Coupling of electromagnetic waves into wires: experiments and simulations. PhD thesis, University of Nottingham.

E

Ebrahim, Mohammed Taha (1995) A very high speed switched reluctance generator. PhD thesis, University of Nottingham.

Effah, Francis Boafo (2014) Three-level Z-source hybrid direct AC-AC power converter topology. PhD thesis, University of Nottingham.

Eleffendi, Mohd Amir (2016) In-service estimation of state of health of power modules. PhD thesis, University of Nottingham.

Elkazaz, Mahmoud (2021) Hierarchical energy management system for controlling distributed energy resources in a community microgrid. PhD thesis, University of Nottingham.

Ellwood, Robert (2012) The effect of microstructure and fatigue on the acoustoelastic response of aerospace materials. PhD thesis, University of Nottingham.

F

Fallows, Daniel James Alfred (2022) Exciterless solutions for medium-power wound-field synchronous generators. PhD thesis, University of Nottingham.

Fan, Linhui (2021) Sensorless control of motoring/generating system for future more-electric turboprop aircraft. PhD thesis, University of Nottingham.

Fazeli, Meghdad (2011) Wind generator-energy storage control schemes for autonomous grid. PhD thesis, University of Nottingham.

G

Garnham, Nigel William (1995) Motion compensated video coding. PhD thesis, University of Nottingham.

Goodman, Andrew Simon (2007) Direct energy converter controllers for switched reluctance motor operation. PhD thesis, University of Nottingham.

Gottardo, Davide (2020) Single phase grid connected power converter topologies with power pulsation compensation. PhD thesis, University of Nottingham.

Greedy, Stephen (2002) Advances in the Spectral Index method for the analysis of photonic integrated circuits. PhD thesis, University of Nottingham.

Guo, Feng (2021) Performance improvement of three-level neutral-point-clamped electric-starter-generator system for more electric aircraft. PhD thesis, University of Nottingham.

H

Harrison, Andrew (1995) ASIC based recorders of electrophysiological signals. PhD thesis, University of Nottingham.

Hernandez, J. A. (2007) Statistics of aberrations in polycrystalline materials. PhD thesis, University of Nottingham.

Herring, Jonathan L. (1993) Developments in the transmission-line modelling method for electromagnetic compatibility studies. PhD thesis, University of Nottingham.

Himsworth, John M. (2011) Linear array CMOS detectors for laser doppler blood flow imaging. PhD thesis, University of Nottingham.

Hind, David Martin (2015) Current derivative estimation for sensorless motor drives. PhD thesis, University of Nottingham.

Housley, James (2010) Determination of the optimum metrics for the characterisation of scattering media. PhD thesis, University of Nottingham.

Hua, Yahan (2009) Sensorless control of surface mounted permanent magnet machine using fundamental PWM excitation. PhD thesis, University of Nottingham.

Huang, Yu (2010) Morphology dependent voltage sensitivity of gold nanostructures. PhD thesis, University of Nottingham.

Huong, Audrey Kah Ching (2012) Spectroscopic analysis of scattering media via different quantification techniques. PhD thesis, University of Nottingham.

Hussaini, Habibu (2023) Control of electrical systems using artificial intelligence for more electric aircraft applications. PhD thesis, University of Nottingham.

Hussein, Abdallah Suliman (2019) SiC-based power electronics for wind energy applications. PhD thesis, University of Nottingham.

I

Inrawong, Prajuab (2012) Application of PCA and Hough Transform to classify features in optical images. PhD thesis, University of Nottingham.

J

Jackson, Stephen (2012) Proposed pixel for custom laser doppler vibrometry camera. PhD thesis, University of Nottingham.

James, Jenna (2021) Structure-function correlation and biophysical analysis of a novel 3D in vitro leukaemia model. PhD thesis, University of Nottingham.

Jasim, Omar (2010) An extended induction motor model for investigation of faulted machines and fault tolerant variable speed drives. PhD thesis, University of Nottingham.

Jia, Ke (2012) Impedance based fault location in power distribution systems. PhD thesis, University of Nottingham.

Jiang, Hui (2012) Audible noise reduction in the high frequency injection based sensorless torque control for EPS applications. PhD thesis, University of Nottingham.

Jiang, Shihong (2005) Non-scanning Fluorescence Confocal Microscopy using Laser Speckle Illumination. PhD thesis, University of Nottingham.

K

Kampisios, Konstantinos T. (2010) Electrical machines parameter identification using genetic algorithms. PhD thesis, University of Nottingham.

Khashan, Lamia M.A. (2015) Dispersion analysis of two-dimensional unstructured transmission line modelling (UTLM). PhD thesis, University of Nottingham.

Korman, Oguz (2024) Design and modelling techniques for performance improvement of synchronous reluctance machines. PhD thesis, University of Nottingham.

Krogemann, Markus (1997) The parallel resonant DC link inverter: a soft-switching inverter topology with PWM capability. PhD thesis, University of Nottingham.

Kulsangcharoen, Ponggorn (2013) Characterization and emulation of a new supercapacitor-type energy storage device. PhD thesis, University of Nottingham.

Kumar, Dinesh (2011) A new multi-motor drive system based on two-stage direct power converter. PhD thesis, University of Nottingham.

Kumar, Varindra (2014) I/O port macromodelling. PhD thesis, University of Nottingham.

L

Lang, Xiaoyu (2021) Advanced integrated power generation centre for future More-Electric Aircraft. PhD thesis, University of Nottingham.

Lavopa, Elisabetta (2011) A novel control technique for active shunt power filters for aircraft applications. PhD thesis, University of Nottingham.

Lee, Meng Yeong (2009) Three-level neutral-point-clamped matrix converter topology. PhD thesis, University of Nottingham.

Li, Haicang (2023) Optimisation of System and Sensor Selection for Safety and Reliability of Autonomous Vehicle. PhD thesis, University of Nottingham.

Li, Mengxiong (2007) 5 GHz Optical Front End in 0.35um CMOS. PhD thesis, University of Nottingham.

Li, Wenqi (2012) Laser ultrasonic method for determination of crystallographic orientation of large grain metals by spatially resolved acoustic spectroscopy (SRAS). PhD thesis, University of Nottingham.

Lian, Zheng Gang (2011) Fabrication of rib waveguides and optical fibres in chalcogenide glasses. PhD thesis, University of Nottingham.

Light, Roger (2008) Design and implementation of an integrating modulated light camera. PhD thesis, University of Nottingham.

Limweshasin, Nat (2024) Optical fibre sensors for respiration monitoring in sports and healthcare. PhD thesis, University of Nottingham.

Liu, Bohan (2012) Advanced ROCOF protection of distribution systems. PhD thesis, University of Nottingham.

Liu, Deyun (2013) Advances in beam propagation method for facet reflectivity analysis. PhD thesis, University of Nottingham.

Liu, Jun yi (2011) High performance active filtering solutions for modern aircraft power network. PhD thesis, University of Nottingham.

Lopez Arevalo, Saul (2008) Matrix converter for frequency changing power supply applications. PhD thesis, University of Nottingham.

Loschi, Hermes (2023) Modulation algorithms of power electronic converters for shaping of conducted interference. PhD thesis, University of Zielona Gora.

M

Madonna, Vincenzo (2020) Physics of failure as a technology enabler for electrical machines in transportation: reliability-oriented design of low voltage insulation systems. PhD thesis, University of Nottingham.

Martinez Gomez, Manuel (2024) Finite-time cooperative control strategies for the economic operation of hybrid AC/DC microgrids. PhD thesis, University of Nottingham.

Mason, Nicholas J. (2011) Space vector modulation of a 4-leg matrix converter. PhD thesis, University of Nottingham.

McCartney, Damon Andrew (2013) Development of the AnimalSeek method to evaluate the localisation ability of children under five. PhD thesis, University of Nottingham.

Meng, Xuesong (2014) Modelling multi-scale problems in the transmission line modelling method. PhD thesis, University of Nottingham.

Mienczakowski, Martin (2010) Advanced ultrasonic NDE of composite airframe components: physics, modelling and technology. PhD thesis, University of Nottingham.

Morley, Andrew (2018) Advances in numerical modelling of waveguide discontinuities in a microwave receiver protector. MRes thesis, University of Nottingham.

Munuswamy, Imayavaramban (2009) Avoiding regeneration with a matrix converter drive. PhD thesis, University of Nottingham.

N

Najeeb, Najla (2017) Design, fabrication and evaluation of a label-free silicon-on-insulator “Lab on a Chip” optical biosensor. PhD thesis, University of Nottingham.

Narayanan, Sridhar (2019) Engine-driven synchronous generators: design considerations for grid code compliance. PhD thesis, University of Nottingham.

Navas Fonseca, Alex Dario (2022) A distributed, predictive secondary control for voltage and frequency regulation, economic dispatch and imbalance sharing in isolated microgrids. PhD thesis, University of Nottingham.

Naylor, Phillip (1986) Coupling between electromagnetic waves and wires using transmission-line modelling. PhD thesis, University of Nottingham.

Naznin, Shakila (2023) Characterisation and phononic image reconstruction of gold nanorods. PhD thesis, University of Nottingham.

Newton, Christopher (1999) The control and operation of the five level diode clamped inverter. PhD thesis, University of Nottingham.

Ngu, Xavier (2009) An assessment of a GTEM cell as a test environment using measurements and simulations. PhD thesis, University of Nottingham.

Nguyen, Son Thanh (2016) The effects of skin moisturizers using electrical impedance spectroscopy. PhD thesis, University of Nottingham.

Niewiadomski, Karol (2024) Statistical analysis in electromagnetic compatibility. PhD thesis, University of Nottingham.

Nunes, Joel (2024) Towards mid-infrared fibre lasing. PhD thesis, University of Nottingham.

O

Okaeme, Nnamdi (2008) Automated robust control system design for variable speed drives. PhD thesis, University of Nottingham.

Oke, Oluwabukola A. (2013) Enhanced unscented transform method for probabilistic load flow studies. PhD thesis, University of Nottingham.

Okunola, Abdullah Akolade (2024) Internal energy control of a cascaded H-Bridge Energy Router. PhD thesis, University of Nottingham.

Orlowski, Rafal John (1976) Ultrasonic echo reinforcement for the blind. PhD thesis, University of Nottingham.

Othman, Md Nazri Bin (2012) Design and evaluation of high power density brushless DC permanent magnet machines. PhD thesis, University of Nottingham.

Othman, Mohd Azlishah (2013) Sub-Terahertz: generation and detection. PhD thesis, University of Nottingham.

P

Palethorpe, Ben (2002) A novel system impedance measurement for power system analysis and improvement in power quality. PhD thesis, University of Nottingham.

Panitz, Mark (2011) Wireless propagation studies in highly resonant and dynamic environments. PhD thesis, University of Nottingham.

Patel, Rikesh Ramesh (2014) Ultrastable heterodyne interferometry using a modulated light camera. PhD thesis, University of Nottingham.

Pechprasarn, Suejit (2012) Analysis of sensitivity and resolution in plasmonic microscopes. PhD thesis, University of Nottingham.

Pena Quintal, Angel Eduardo (2023) On low frequency conducted EMI: interference mitigation with focus on the DC switching harmonic in the time and frequency domains. PhD thesis, University of Nottingham.

Petheram, R.J. (1989) Automatic pattern recognition. PhD thesis, University of Nottingham.

Photong, Chonlatee (2013) A current source inverter with series AC capacitors for transformerless grid-tied photovoltaic applications. PhD thesis, University of Nottingham.

Prociów, Paweł (2011) Mobile psychiatry: Personalised Ambient Monitoring for the mentally ill. PhD thesis, University of Nottingham.

Pui, Boon Hean (2004) CMOS optical centroid processor for an integrated Shack-Hartmann wavefront sensor. PhD thesis, University of Nottingham.

Q

Quadri, Syed Quadir Hussain (2020) On the analysis and modelling of the effects of high frequency harmonics on classical synchronous generators. PhD thesis, University of Nottingham.

R

Rajab, Maher I. (2003) Neural network edge detection and skin lesions image segmentation methods: analysis and evaluation. PhD thesis, University of Nottingham.

Ramalho, Mário António da Silva Neves (1996) Edge detection using neural network arbitration. PhD thesis, University of Nottingham.

Raute, Reiko (2009) Sensorless control of AC machines for low and zero speed operation without additional test signal injection. PhD thesis, University of Nottingham.

Rengasamy, Divish (2022) Embedding and Extracting Domain Knowledge in Machine Learning for Condition-based Maintenance. PhD thesis, University of Nottingham.

Ridgway, Leah M. (2011) Magneto-dieletric properties of bismuth substituted barium hexaferrite. PhD thesis, University of Nottingham.

Riley, Paul Howard (2014) Designing a low-cost electricity-generating cooking stove for high-volume implementation. PhD thesis, University of Nottingham.

Rodmell, Paul Irvin (2006) A novel oximeter. PhD thesis, University of Nottingham.

Rohouma, Wesam M.M. (2013) Design control and implementation of a four-leg matrix converter for ground power supply application. PhD thesis, University of Nottingham.

S

Sanderson, J.V.H. (1973) The analysis and protection of systems containing series compensated power lines. PhD thesis, University of Nottingham.

Scott, Ian (2010) Developments in time-reversal of electromagnetic fields using the transmission-line modelling method. PhD thesis, University of Nottingham.

Shao, Shuai (2015) The application of sliding mode observers to fault detection and isolation for multilevel converters. PhD thesis, University of Nottingham.

Sharples, Steve David (2003) All-optical scanning acoustic microscope. PhD thesis, University of Nottingham.

Shattock, Nicholas (2014) High frequency-link cycloconverters for medium voltage grid connection. PhD thesis, University of Nottingham.

Silva, César Armando (2003) Sensorless vector control of surface mounted permanent magnet machines without restriction of zero frequency. PhD thesis, University of Nottingham.

Skoulaxinos, Stefanos (2024) Motor control in aerospace, optimizing availability and acoustics. PhD thesis, University of Nottingham.

Skuriat, Robert (2012) Direct jet impingement cooling of power electronics. PhD thesis, University of Nottingham.

Slater, Geoffrey Ferguson (1973) The use of finite transmission line elements in numerical analysis. PhD thesis, University of Nottingham.

Smith, Richard (2006) Optical measurement of ultra fine linewidths using artificial neural networks. PhD thesis, University of Nottingham.

Smith, Robert A. (2010) Use of 3D ultrasound data sets to map the localised properties of fibre-reinforced composites. PhD thesis, University of Nottingham.

Srithorn, Phinit (2009) Control of a statcom with supercapacitor energy storage. PhD thesis, University of Nottingham.

Stabler, Graham (2005) High resolution wide field surface plasmon microscopy. PhD thesis, University of Nottingham.

Stockford, Ian M (2004) Characterisation of layered scattering media using polarized light. PhD thesis, University of Nottingham.

Stockwell, Simon John (2024) Improvement of reflection-mode pulse oximetry for measurement of SpO2 in newborns. PhD thesis, University of Nottingham.

Sumner, M. (1990) Vector controlled induction motor drive using transputer parallel processors. PhD thesis, University of Nottingham.

Sünter, Sedat (1995) A vector controlled matrix converter induction motor drive. PhD thesis, University of Nottingham.

T

Tami, Abdelkader (1995) Modelling of rotor defects in squirrel cage induction motors using the time stepping numerical field analysis. PhD thesis, University of Nottingham.

Tarisciotti, Luca (2014) Model predictive control for advanced multilevel power converters in smart-grid applications. PhD thesis, University of Nottingham.

Teo, Yu Xian (2013) Modelling of interconnects including coaxial cables and multiconductor lines. PhD thesis, University of Nottingham.

Teske, Nikolas (2001) Sensorless position control of induction machines using high frequency signal injection. PhD thesis, University of Nottingham.

Thomas, David William Phillip (1990) Protection of major transmission lines using travelling-waves. PhD thesis, University of Nottingham.

Tom, Liya (2024) Design, development and manufacturability study of aerospace actuator motor. PhD thesis, University of Nottingham.

Tong, Xin (2010) Simplified equivalent modelling of electromagnetic emissions from printed circuit boards. PhD thesis, University of Nottingham.

Trenkic, Vladica (1995) The development and characterisation of advanced nodes for the TLM method. PhD thesis, University of Nottingham.

Turl, Gary (2002) A synchronised multi-motor control system using hybrid sensorless induction motor drives. PhD thesis, University of Nottingham.

U

Ungku Amirulddin, Ungku Anisa (2006) Analysis and simulation of vector controlled bearingless induction motors. PhD thesis, University of Nottingham.

V

Valente, Giorgio (2018) Radial force control of bearingless multi-sector permanent magnet machines. PhD thesis, University of Nottingham.

Velmurugan, Ganeish (2020) More electric aircraft starter-generator system based on switched reluctance machine: a feasibility study. PhD thesis, University of Nottingham.

Vodden, John Alan (2012) Modulation techniques for the cascaded H-bridge multi-level converter. PhD thesis, University of Nottingham.

Vongurai, Rawin (2013) Development of digital filtering techniques in three-dimensional TLM models. PhD thesis, University of Nottingham.

W

Wakatsuchi, Hiroki (2011) Computational studies of the electromagnetic properties of metamaterials and applications. PhD thesis, University of Nottingham.

Wang, Bo (2023) Design and study on fault tolerant permanent magnet starter-generator for more electric aircraft application. PhD thesis, University of Nottingham.

Wang, Lin (2010) High-resolution structured illumination solid immersion fluorescence microscopy. PhD thesis, University of Nottingham.

Ward, Christopher M. S. (2010) Novel NDE techniques in the power generation industry. EngD thesis, University of Nottingham.

Watson, Alan James (2009) Selective harmonic elimination methods for a cascaded H-bridge converter. PhD thesis, University of Nottingham.

Wen, Zhuang (2022) Advanced control strategies for partially levitating multi-sector permanent magnet synchronous machines. PhD thesis, University of Nottingham.

White, Roger D. (1992) Computer modelling techniques for industrial and marine cyclo-converter drives. PhD thesis, University of Nottingham.

X

Xiao, Li (2011) An investigation of dielectric tunable materials for microwave tunable devices. PhD thesis, University of Nottingham.

Xiong, Hao (2013) Antenna array geometries and algorithms for direction of arrival estimation. MRes thesis, University of Nottingham.

Xu, Tianning (2009) New hybrid cycloconverters: an evaluation of their performance. PhD thesis, University of Nottingham.

Y

Yan, Kaiqi (2024) Coupled electrothermal modelling of plasma using unstructured Transmission-Line Modelling method. PhD thesis, University of Nottingham.

Yang, Li (2013) A damage-based time-domain wear-out model for wire bond interconnects in power electronic modules. PhD thesis, University of Nottingham.

Yang, Tao (2013) Development of dynamic phasors for the modelling of aircraft electrical power systems. PhD thesis, University of Nottingham.

Yao, Li (2006) Magnetic field modelling of machine and multiple machine systems using dynamic reluctance mesh modelling. PhD thesis, University of Nottingham.

Z

Zdanowicz, Mariusz Rafal (2008) Numerical analysis of photonic crystal fibres. MRes thesis, University of Nottingham.

Zhang, Bei (2013) Confocal surface plasmon microscopic sensing. PhD thesis, University of Nottingham.

Zhu, Qun (2009) Rotating orthogonal polarization imaging. PhD thesis, University of Nottingham.

Zhu, Zhongdao (2013) Modeling and optimization of microwave ring resonator filters using CST software. MSc(Res) thesis, University of Nottingham.