• Login
• Admin

A

Abdul Hassan, Norhidayah (2013) Microstructural characterisation of rubber modified asphalt mixtures. PhD thesis, University of Nottingham.

Abedraba Abdalla, Mariam (2024) In situ application of porous particles in delaying asphalt ravelling. PhD thesis, University of Nottingham.

Abou-Foul, Mustafa (2019) Moisture transport through pores in porous asphalt pavement materials. PhD thesis, University of Nottingham.

Ahmad, Naveed (2011) Asphalt mixture moisture sensitivity evaluation using surface energy parameters. PhD thesis, University of Nottingham.

Ahmad Al-Hadad, Botan (2011) An approach to the highway alignment development process using genetic algorithm based optimisation. PhD thesis, University of Nottingham.

Ahmed, Imtiaz (2020) Design of heavy-duty pavements incorporating a granular interlayer. PhD thesis, University of Nottingham.

Airey, Gordon (1997) Rheological characteristics of polymer modified and aged bitumens. PhD thesis, University of Nottingham.

Ajam, Harith K.K. (2019) Effect of heating energy, steel fibres, bitumen types and ageing on the self-healing phenomena in hot mix asphalt. PhD thesis, University of Nottingham.

Al-Mansoori, Tariq Hussein Abees (2018) Encapsulated healing agents for asphalt self-healing. PhD thesis, University of Nottingham.

Al-Mosawe, Hasan (2016) Prediction of permanent deformation in asphalt mixtures. PhD thesis, University of Nottingham.

Alacash, Hamid Ahmed Awad (2018) Establish skid resistance thresholds for local authority roads in the UK using statistical models. PhD thesis, University of Nottingham.

Alenezi, Thamer (2019) Cold mix asphalt made with bitumen emulsion capsules. PhD thesis, University of Nottingham.

Alfaqawi, Rami Mohammed S. (2018) Investigation into ageing and the effect of hydrated lime on mastics and mixture ageing. PhD thesis, University of Nottingham.

Aljubory, Ahmed Ibrahim Ahmed (2019) Assessment of environmental factor effects on fatigue and healing performance of asphalt mixtures. PhD thesis, University of Nottingham.

B

Bell, C.A. (1978) The prediction of permanent deformation in flexible pavements. PhD thesis, University of Nottingham.

Brito, Lelio (2011) Design methods for low volume roads. PhD thesis, University of Nottingham.

Brown, S.F. (1967) Stresses and deformations in flexible layered pavement systems subjected to dynamic loads. PhD thesis, University of Nottingham.

C

Cai, Wei (2015) Discrete element modelling of permanent pavement deformation in granular materials. PhD thesis, University of Nottingham.

Cai, Wei (2013) Discrete element modelling of constant strain rate and creep tests on a graded asphalt mixture. PhD thesis, University of Nottingham.

Chen, An-Qi (2022) Micro mechanism of fatigue cracking in asphalt concrete. PhD thesis, University of Nottingham.

Chen, Jianjun (2016) An intelligent container transportation system using novel modelling, metaheuristics and automatic dispatching strategy. PhD thesis, University of Nottingham.

Cheung, Lam Wah (1994) Laboratory assessment of pavement foundation materials. PhD thesis, University of Nottingham.

Chu, Xuanxuan (2023) Road and Railway Foundation Response to Moisture Content and Drainage. PhD thesis, University of Nottingham.

Cuciniello, Giacomo (2019) Study of the effect of laboratory-simulated ageing on the damage resistance of polymer-modified bitumens in intermediate climates. PhD thesis, University of Nottingham.

D

Dalla Valle, Paola (2015) Reliability in pavement design. PhD thesis, University of Nottingham.

Deep, Pawan (2021) Continuous structural evaluation of rigid pavements(JCP). PhD thesis, University of Nottingham.

Djabatey, Charles (2023) Experimenting and modelling the role of road surface detritus in the formation of potholes. PhD thesis, University of Nottingham.

Dunford, Alan (2013) Friction and the texture of aggregate particles used in the road surface course. PhD thesis, University of Nottingham.

Dunhill, Stuart Thomas (2002) Quasi-static characterisation of asphalt mixtures. PhD thesis, University of Nottingham.

F

Farhan, Ahmed Hilal (2016) Characterization of rubberized cement-stabilized roadbase mixtures. PhD thesis, University of Nottingham.

Feng, Mingwei (2020) Mechanical properties of stabilized soils for pavement applications. MRes thesis, University of Nottingham.

G

Gao, Yang (2017) Robust cooperative positioning using DGPS and UWB for V2X applications. PhD thesis, Nottingham Geospatial Institute, University of Nottingham.

Giancontieri, Gaspare (2020) Improving the rheometry of heterogeneous bituminous binders through experimental and numerical procedures. PhD thesis, University of Nottingham.

Gillett, Simon D. (2002) Accuracy in mechanistic pavement design consequent upon unbound material testing. PhD thesis, University of Nottingham.

Grossegger, Daniel (2019) The self-healing mechanism of macro cracks in asphalt mortar and its influencing factors. PhD thesis, University of Nottingham.

H

Haji Abdul Karim, Roslinah (2015) Foamed bitumen stabilised sandstone aggregates. PhD thesis, University of Nottingham.

Hassn, Abdushafi Alhashmi (2017) Effect of air voids on pavement thermal properties. PhD thesis, University of Nottingham.

Hau, Kah Wai (2003) Application of a three-surface kinematic hardening model to the repeated loading of thinly surfaced pavements. PhD thesis, University of Nottingham.

Heneash, Usama (2013) Effect of the repeated recycling on hot mix asphalt properties. PhD thesis, University of Nottingham.

J

Jalali, Venon (2016) Performance of warm mix asphalt compacted at reduced temperature. PhD thesis, University of Nottingham.

Jiménez del Barco Carrión, Ana (2017) Design and characterisation of reclaimed asphalt mixtures with biobinders. PhD thesis, University of Nottingham.

Juspi, Sumyaty (2007) Experimental validation of the shakedown concept for pavement analysis and design. PhD thesis, University of Nottingham.

K

Keikhaei Dehdezi, Pejman (2012) Enhancing pavements for thermal applications. PhD thesis, University of Nottingham.

Khojinian, Arash (2020) Performance analysis of thin surface course systems used in England: a novel approach based on viscous to elastic transition (VET) parameters. PhD thesis, University of Nottingham.

L

Lacalle Jiménez, Helena Isabel (2017) Airfield pavement design with cold recycled materials. PhD thesis, University of Nottingham.

Leworthy, Samuel C. (2022) Fundamental analysis of self-healing phenomena in asphalt mixtures. PhD thesis, University of Nottingham.

Lightburn, Angela D.C. (1984) The development of the Traffic Conflicts Technique: an approach to the study of road accidents. PhD thesis, University of Nottingham.

Little, Peter H. (1993) The design of unsurfaced roads using geosynthetics. PhD thesis, University of Nottingham.

Liu, Shu (2016) Application of shakedown theory in the structural design of bituminous pavements. PhD thesis, University of Nottingham.

Liu, Yawen (2017) Prediction of pavement surface deterioration. PhD thesis, University of Nottingham.

Loach, Simon C. (1987) Repeated loading of fine grained soils for pavement design. PhD thesis, University of Nottingham.

M

Maggiore, Cinzia (2014) A comparison of different test and analysis methods for asphalt fatigue. PhD thesis, University of Nottingham.

Manosalvas-Paredes, Mario (2021) Full–scale validation and implementation guidelines of combined piezoelectric sensing and big data analytics for long-term pavement performance monitoring. PhD thesis, University of Nottingham.

Mohammed, Monketh (2019) Permanent deformation resistance of fibre reinforced asphalt mixture. PhD thesis, University of Nottingham.

Mohd. Jakarni, Fauzan (2012) Adhesion of asphalt mixtures. PhD thesis, University of Nottingham.

Mubaraki, Muhammad (2010) Predicting deterioration for the Saudi Arabia Urban Road Network. PhD thesis, University of Nottingham.

Muslich, Sutanto (2010) Assessment of bond between asphalt layers. PhD thesis, University of Nottingham.

N

Nassar, Ahmed Izat Mohammed (2016) Enhancing the performance of cold bitumen emulsion mixture using supplementary cementitious materials. PhD thesis, University of Nottingham.

Needham, D. (1996) Developments in bitumen emulsion mixtures for roads. PhD thesis, University of Nottingham.

Nunes, Manuel Clemente Mendonça (1997) Enabling the use of alternative materials in road construction. PhD thesis, University of Nottingham.

O

Obaidi, Hadel Ibraheem Ahmad (2018) Development of innovative pothole repair materials using induction heating technology. PhD thesis, University of Nottingham.

Ogundipe, Olumide Moses (2012) Mechanical behaviour of stress absorbing membrane interlayers. PhD thesis, University of Nottingham.

Ojum, Chibuzor Kingsley (2015) The design and optimisation of cold asphalt emulsion mixtures. PhD thesis, University of Nottingham.

Oke, Oluwaseyi Olanrewaju (2011) A study on the development of guidelines for the production of bitumen emulsion stabilised RAPs for roads in the tropics. PhD thesis, University of Nottingham.

P

Pasupunuri, Sampath Kumar (2024) Development of prediction models for various distresses in jointed plain concrete pavement using machine learning and finite element modelling. PhD thesis, University of Nottingham.

Pires, Gustavo Menegusso (2018) A new methodology for the measurement of the reclaimed asphalt degree of binder activation. PhD thesis, University of Nottingham.

Q

Qiao, Yaning (2015) Flexible pavements and climate change: impact of climate change on the performance, maintenance, and life-cycle costs of flexible pavements. PhD thesis, University of Nottingham.

R

Rahim, Abdur (2017) Effect of fillers on the oxidative ageing of bitumen and cohesive bond strength of mastics. PhD thesis, University of Nottingham.

Read, John (1996) Fatigue cracking of bituminous paving mixtures. PhD thesis, University of Nottingham.

Ruiz-Riancho, N (2022) Optimisation of encapsulated oil properties to maximise asphalt self-healing. PhD thesis, University of Nottingham.

S

Salih, Siham Idan (2020) Self-healing of cyclic loading damage in asphalt mixtures. PhD thesis, University of Nottingham.

Sanders, Paul John (2001) Reinforced asphalt overlays for pavements. PhD thesis, University of Nottingham.

Sewell, Anthony J. (2017) Crack propagation in high modulus asphalt mixtures. PhD thesis, University of Nottingham.

Sudibyo, Tri (2024) The behaviour of LDPE-modified asphalt mixture in pavement application. PhD thesis, University of Nottingham.

T

Taylor, Jackie V. (2004) Migration of contaminants associated with pavement construction. PhD thesis, University of Nottingham.

Thom, Nicholas (1988) Design of road foundations. PhD thesis, University of Nottingham.

Traseira Piñeiro, Laura (2024) Evaluation of encapsulated rejuvenators conventionally used for asphalt self-healing enhancement as architected cellular particles. PhD thesis, University of Nottingham.

W

Wan, Liyao (2023) Algorithms and performance-based method to create asphalt mixture. PhD thesis, University of Nottingham.

Wang, Juan (2011) Shakedown analysis and design of flexible road pavements under moving surface loads. PhD thesis, University of Nottingham.

Weir Vargas, Ana I. (2022) Production and characterisation of waste lignin and biodiesel-derived residues as potential bitumen modifiers. EngD thesis, University of Nottingham.

Wright, Michael (2013) A study of the effects of adding ice retardant additives to pavement surface course materials. PhD thesis, University of Nottingham.

Y

Yang, Chao (2013) Highway asset management. PhD thesis, University of Nottingham.

Z

Zaidi, Syed Bilal Ahmed (2018) The influence of hydrated lime on moisture susceptibility of asphalt mixtures. PhD thesis, University of Nottingham.

Zakaria, Nur Mustakiza (2020) Characterisation of bitumen and asphalt mixture with recycled waste plastic (RWP) modified binder. PhD thesis, University of Nottingham.

Zhang, Jizhe (2016) Moisture damage of aggregate-bitumen bonds. PhD thesis, University of Nottingham.