• Login
• Admin

Sanders, Paul John (2001) Reinforced asphalt overlays for pavements. PhD thesis, University of Nottingham.

Preview

PDF - Requires a PDF viewer such as GSview, Xpdf or Adobe Acrobat Reader Download (26MB) | Preview

Abstract

The maintenance of road pavements in England has become a costly necessity, due largely to the large volume of commercial vehicles using the roads which cause pavements to deteriorate quickly, and makes their repair more difficult to carry out. These roadworks incur not only direct works costs, but also indirect costs from factors such as congestion, motor accidents and pollution. There is obviously a need for cost-effective maintenance that minimises the occurrence and duration of these disruptions.

To strengthen pavements bituminous overlays are often used, but may crack prematurely when placed over a layer with discontinuities such as cracks or joints, or deform excessively under wheel loading. The problem of 'reflective cracking' is widespread and reduces the life of maintenance treatments considerably. To increase the time before cracking appears on the surface of a pavement, a (more expensive) thicker overlay may be used, but this can lead to problems with property thresholds and bridge clearance. One possible option of reducing the thickness of overlays by making them more resistant against cracking and deformation, is to place a layer-of reinforcement within or at the bottom of the overlay. Although this approach has been used occasionally to reinforce overlays, over 40 years or so, it is not favoured with many road authorities, as the results of these treatments are difficult to anticipate, and may not be cost effective.

This thesis describes an investigation into the effect of reinforcing thin bituminous overlays to identify key factors that significantly influence their performance. By identifying these factors, optimum use of reinforced asphalt should be possible, and thus maintenance of the road network made more cost effective.

The investigation was principally carried out in the laboratory using beam tests, shear box tests, tensile tests on reinforcement and large-scale wheel tracking tests. 2-D Finite Element Analysis was used in the analysis of test results.

Results show that properly constructed reinforced overlays can be between two or three times more resistant to cracking, and have less than half the permanent deformation of unreinforced materials.

Item Type:	Thesis (University of Nottingham only) (PhD)
Supervisors:	Brown, S.F. Thom, N.H.
Keywords:	Roads, maintenance and repair, pavements, asphalt, cracking, overlays
Subjects:	T Technology > TE Highway engineering. Roads and pavements
Faculties/Schools:	UK Campuses > Faculty of Engineering > Department of Civil Engineering
Item ID:	12221
Depositing User:	EP, Services
Date Deposited:	13 Oct 2011 11:03
Last Modified:	20 Dec 2017 17:48
URI:	https://eprints.nottingham.ac.uk/id/eprint/12221

Actions (Archive Staff Only)

Edit View