Browse by Subjects

Up a level
Export as [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Date | No Grouping
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | R | S | T | U | V | W | X | Y | Z
Number of items at this level: 304.

A

Abdul Kahar, Ainaa (2021) Effect of drying on the kinetics, stability of active ingredients and non- destructive testing of Backhousia citriodora (lemon myrtle) dehydrated leaves. PhD thesis, University of Nottingham Malaysia.

Abdullah, Jwan (2016) Viability of autoclaved municipal solid waste as a source for biofuels and other products. PhD thesis, University of Nottingham.

Adam, Mohamed A.B. (2017) Understanding microwave pyrolysis of biomass materials. PhD thesis, University of Nottingham.

Ahmed, Mohamed (2023) Techno-economic and environmental assessment of CO2 utilisation processes for the production of dimethyl ether and olefins. PhD thesis, University of Nottingham.

Al Hanashi, Khalil (2019) Removal of carbon dioxide from high pressure natural gas by adsorption on activated carbons. PhD thesis, University of Nottingham.

Al-Atta, Ammar Jaber (2018) Supercritical water oxidation of hazardous waste: process enhancement and reactor design. PhD thesis, University of Nottingham.

Al-Juboori, Ossama Hussein Ali (2019) Conversion of carbon dioxide gas to hydrocarbon fuels by electrolysis in molten salts. PhD thesis, University of Nottingham.

Al-Obaidani, Ammar (2009) Development of a photocuring system for cationic epoxy formulations using side emitting optical fibres. PhD thesis, University of Nottingham.

Al-Shara, Nawar Kader Augla (2018) Splitting steam via eutectic molten hydroxide assisted electrolysis for hydrogen gas production. PhD thesis, University of Nottingham.

Al-Shihabi Al-Ani, Athil Khairi J. (2021) Novel TiO2 nanotube arrays for photoelectrocatalysis application. PhD thesis, University of Nottingham.

Al-hamdani, Kamaal (2019) Deposition of satellited Al-TiC powders for coating applications. PhD thesis, University of Nottingham.

Alali, I.K (2023) Synthesis and characterisation of porous carbons with optimised properties for targeted sustainable energy applications. PhD thesis, University of Nottingham.

Albazzaz, Shaima (2020) Understanding and minimising water vapour co-adsorption for activated carbons in post-combustion CO2 capture. PhD thesis, University of Nottingham.

Alghaffari, Nabeel Kadhim Abbood (2015) Development of a micro crystallisation system for the production of sub-micron particulates with narrow-size-distribution. PhD thesis, University of Nottingham.

Ali, Sheikh Mohammod (2013) Ultrasonic and thermo-kinetic characterization of curing epoxy resin. PhD thesis, University of Nottingham.

Almuhana, Asia (2019) The synthesis and analysis of nanodiamond-perylene nanocomposites. MSc(Res) thesis, University of Nottingham.

Alrayyes, Taleb (2011) The effect of ethanol-gasoline blends on SI engine energy balance and heat transfer characteristics. PhD thesis, University of Nottingham.

Anthony, Paul (1999) Respiratory gas carriers in plant culture systems. PhD thesis, University of Nottingham.

Argyriou, Dimitrios (2018) Effect of cysteine on different durum wheat flour fractions. Relationships between descriptive rheology and baking properties. MRes thesis, University of Nottingham.

Arshad, Adeel (2021) Assessment of nanomaterials in enhancing the thermophysical properties of phase change materials for thermal management. PhD thesis, University of Nottingham.

Ashry Abdelaal, Ahmed (2017) Adsorption and time dependent fixation of uranium (VI) in synthetic and natural matrices. PhD thesis, University of Nottingham.

Ayixiamuguli, Nueraimaiti (2016) Lignin degradation using lignolytic enzymes. PhD thesis, University of Nottingham.

B

Baheti, Payal Arvindkumar (2019) Clean synthesis of novel green surfactants. PhD thesis, University of Nottingham.

Baichoo, Nameeta (2007) The effect of rapid cooling on the fat phase of chocolate. PhD thesis, University of Nottingham.

Bajko, Paulina (2019) Escherichia coli acyl-CoA dehydrogenase inhibitors and genetic engineering for short chain alkane production. PhD thesis, University of Nottingham.

Barman, Tamal (2020) Synthesis of polyfluoroacrylate emulsion and coatings for hydrophobic and icephobic applications. PhD thesis, University of Nottingham.

Barranco Melendez, Richelieu (2001) THE CHARACTERISATION AND COMBUSTION OF SOUTH AMERICAN COALS. PhD thesis, University of Nottingham.

Bartlett, Connor (2023) The Growth of Pathogens and Beer Spoilage Organisms in No and Low Alcohol Beers and Strategies to Prevent Their Growth. MRes thesis, University of Nottingham.

Basle, Mattias Pascal Fabien (2020) Development of an artificial metalloenzyme from a nicotinamide-dependent enzymatic scaffold. PhD thesis, University of Nottingham.

Bassett, Simon (2015) Polymerisations in supercritical carbon dioxide. PhD thesis, University of Nottingham.

Beyts, Camilla (2016) Measuring emotional response towards aroma attributes in beer; a comparison of self-report, physiological and facial expression measures. MPhil thesis, University of Nottingham.

Blackman, James Michael (2005) High Pressure Hydrogen Storage on Carbon Materials for Mobile Applications. PhD thesis, University of Nottingham.

Boyd, Matthew (2006) The phase behaviour of xanthan based biopolymer mixtures. PhD thesis, University of Nottingham.

Braz de Sousa, Ana Letícia (2020) Preparation and characterisation of polymer microparticles with varying morphologies with application in drug delivery. PhD thesis, University of Nottingham.

Brian, Kathryn Rose (2019) Quantifying phosphorus-biochar interactions to determine effectiveness of biochar as a sustainable soil improver. PhD thesis, University of Nottingham.

Bridge, Christopher P. (2018) Biomass co-firing to improve the burn-out of unreactive coals in pulverised fuel combustion. EngD thesis, University of Nottingham.

Butterworth, Jessica Helen (2017) Mid-infrared transmitting Ge-Sb-Se chalcogenide glass fibres: for potential use in medical diagnostics. PhD thesis, University of Nottingham.

C

Cann, Robert James (1977) A fracture mechanics approach to static and fatigue failure in glass reinforced plastics. PhD thesis, University of Nottingham.

Canning, Anne (2018) Enzyme responsive surfaces: towards a smart cell-material interface. PhD thesis, University of Nottingham.

Cao, Pengfei (2017) The development of Ni based catalysts for carbon dioxide reforming of methane. PhD thesis, University of Nottingham.

Castle, Jack (2019) Polyoxometalates as redox mediators for Li-air batteries. MSc(Res) thesis, University of Nottingham.

Cavanagh, Robert (2018) An investigation into mechanisms of non-ionic surfactant effect on epithelial cells. PhD thesis, University of Nottingham.

Chai, Wai Siong (2017) Characterization & analysis on electrolytic decomposition of hydroxylammonium nitrate (HAN) ternary mixtures in microreactors. PhD thesis, University of Nottingham.

Chaney, Joel O. (2010) Combustion characteristics of biomass briquettes. PhD thesis, University of Nottingham.

Chen, Luming (2017) Experimental and numerical investigation in CO2 sequestrations in chemical looping combustion. PhD thesis, University of Nottingham.

Chen, Wanru (2019) Thermal processing of microalgae into biofuels and advanced energy materials. PhD thesis, University of Nottingham.

Chen, Yinghui (2007) Ultrasonic wave propagation in concentrated emulsions and encapsulated emulsions. PhD thesis, University of Nottingham.

Cheng, Xinwei (2016) Development of reduced reaction kinetics and fuel physical properties models for in-cylinder simulation of biodiesel combustion. PhD thesis, University of Nottingham.

Cheng, Zhixing (2021) Controllable synthesis of transition metal nitride materials and performance tuning in photocatalysis and piezoelectric catalysis. PhD thesis, University of Nottingham.

Chew, Kit Wayne (2019) Cultivation of microalgae using organic compost as nutrient source for biomolecules extraction via multiphase partitioning techniques. PhD thesis, University of Nottingham.

Chia, Shir Reen (2021) Development of novel sonoprocessing based bi- and triphasic systems for the extraction of biomolecules from microalgae. PhD thesis, University of Nottingham.

Chia, Wen Yi (2024) Understanding the status and prospects of biomass industry: processing biowaste into bioenergy pellets. PhD thesis, University of Nottingham.

Chong, Jia Wen (2023) Computational and experimental studies on the reaction mechanism of bio-oil components with additives for increased stability and fuel quality. PhD thesis, University of Nottingham.

Chong, Yen Yee (2020) Upgrading of bio-oil from palm empty fruit bunch fibre with non-acidic oxides via catalytic intermediate pyrolysis. PhD thesis, University of Nottingham.

Chou, Pui May (2016) The study and fabrication of a novel thermally responsive microcarrier for cell culture application. PhD thesis, University of Nottingham.

Chow, Wei Ling (2019) Anaerobic co-digestion (ACD) of glycerin pitch (GP) with oleochemical effluent (OCE). PhD thesis, University of Nottingham.

Chu, Jin Kiat (2023) Modelling of ultrasonic wave propagation for industrial sonoreactor design and optimisation. PhD thesis, University of Nottingham.

Clark, Wayne William Philip (2001) The interfacial characteristics of falling film reactors. PhD thesis, University of Nottingham.

Croston, Deborah Louise (2007) The effect of metal oxide additives on the hydrogen sorption behaviour of magnesium hydride. PhD thesis, University of Nottingham.

Curia, Silvio (2016) Supercritical carbon dioxide for green polymer chemistry. PhD thesis, University of Nottingham.

D

De Chirico, Simone (2019) Optimising the recovery and stabilisation of intact oil bodies from oilseed rape. PhD thesis, University of Nottingham.

DeLaney, Erica Noel (2018) Photochemistry and electrochemistry in continuous flow toward integrated processes. PhD thesis, University of Nottingham.

Deavin, Oliver (2018) Thermodynamic tuning of lithium borohydride using various metallic sources. PhD thesis, University of Nottingham.

Dehili, Chafika (2008) Using plasma polymerised allylamine to culture hepatocytes in in-vitro fluidic bioreactor. PhD thesis, University of Nottingham.

Dewi, Shinta Rosalia (2023) Extraction of bioactive compounds from cacao pod husks (CPH). PhD thesis, University of Nottingham.

Dias Ferreira, Lais (2021) Fundamental studies of ionic liquid electrolytes aiming at application in Na metal-based batteries. PhD thesis, University of Nottingham.

Dolganov, Aleksei (2020) Cost-effective and eco-friendly manufacture of titanium components via the near-net-shape electrochemical metallisation process. PhD thesis, University of Nottingham.

Dong, Jie (2017) Modelling of multiphase flow containing ionic liquids in a stirred tank reactor. PhD thesis, University of Nottingham.

E

Eaton, Curtis (2015) Developing an effective approach to measure emotional response to the sensory properties of beer. PhD thesis, University of Nottingham.

Edney, Max (2022) Uncovering the molecular compositions, origins and formation pathways of engine deposits using OrbiSIMS. EngD thesis, University of Nottingham.

Ee, Cheak Theng (2021) Drying kinetics and quality of dried kedondong fruits undergoing hybrid drying processes. PhD thesis, University of Nottingham.

Elfaki, Hind Omer Elsheikh (2016) Hydrogen production through sorption-enhanced steam reforming of ethanol using CaO-based sorbent mixed with iron oxide catalyst. PhD thesis, University of Nottingham.

Eshtaya, Majd (2016) Towards sustainable production of renewable chemicals from lignin. PhD thesis, University of Nottingham.

Ewurum, Chioma Eberechukwu (2019) Techno-economic analysis of micro-algae bio-jet fuel production processes. PhD thesis, University of Nottingham.

Ezeh, Collins Izuchukwu (2018) Novel materials for CO2 adsorption and reduction to methanol via hydrogenation. PhD thesis, University of Nottingham.

F

Farid, Osama (2011) Investigating membrane selectivity based on polymer swelling. PhD thesis, University of Nottingham.

Farrow, Timipere Salome (2013) A fundamental study of biomass oxy-fuel combustion and co-combustion. PhD thesis, University of Nottingham.

Farthing, Sarah (2021) Hydrothermal carbonisation of digestate: an investigation into the technical design, economic feasibility and future potential of the process. PhD thesis, University of Nottingham.

Felton, James (2023) The Fundamental Interactions Between Hydrogen and group III-VI and IV-VI van der Waals Crystals. PhD thesis, University of Nottingham.

Findlay, Elliot (2022) Metal Doped Porous Carbons for Use in Energy Applications: A Review. MRes thesis, University of Nottingham.

Flinn, Amy (2021) Towards Continuous Organic Photochemistry. PhD thesis, University of Nottingham.

Foong, Steve Zhi Yi (2020) Multilevel optimisation for sustainable oil palm value chain development. PhD thesis, University of Nottingham.

Ford, Candice (2023) Enzymatic alternatives to permanent hair straightening methods. PhD thesis, University of Nottingham.

Fry, Christopher (2013) Development of magnesium-based multilayer PVD coatings for hydrogen storage applications. PhD thesis, University of Nottingham.

Fuentes Sainz, Marina (2016) Terpenes in radical polymerisation: polymer synthesis and applications. PhD thesis, University of Nottingham.

G

Gan, Shu Hui (2017) Improving drying characteristics and quality attributes of edible bird’s nest (EBN) processed under intermittent IR-UVC assisted drying. PhD thesis, University of Nottingham.

Geetha Bai, Renu (2017) Strategies in the fabrication of modified graphene nanomaterials: prospects in the electrochemical sensing of biomolecules and anticancer effects. PhD thesis, University of Nottingham.

Gill, Andrew (2017) The development of activated carbon from biomass precursors. EngD thesis, University of Nottingham.

Gillis, James D. (2022) Investigating the Biophysical Properties of Directional Freezing and its Application to Nondomestic Species. PhD thesis, University of Nottingham.

Giyani, Baker (2023) Microwave processing of ores. PhD thesis, University of Nottingham.

Goh, Wui Seng (2018) Synthesis and optimisation of a lignocellulosic biomass pre-processing system for thermochemical biorefineries. MPhil thesis, University of Nottingham.

Gonçalves Lobato de Almeida, Maria Teresa (2021) Design and fabrication of a device for three-dimensional neuronal development. PhD thesis, University of Nottingham.

Graham, Shalini L. (2015) Degradation of biomass fuels during long term storage in indoor and outdoor environments. EngD thesis, University of Nottingham.

Griffiths, John R. (1974) Fatigue of glass reinforced plastics under complex stresses. PhD thesis, University of Nottingham.

Gude, Christian (2021) Metabolic engineering of Cupriavidus necator H16 for the production of C5 platform chemicals. PhD thesis, University of Nottingham.

Guo, Xiaotong (2020) Oxide nanoparticle-doped molten carbonate salts for thermal energy storage. PhD thesis, University of Nottingham.

Güleç, Fatih (2020) Demonstrating the applicability of chemical looping combustion for fluid catalytic cracking unit as a novel CO2 capture technology. PhD thesis, University of Nottingham.

H

Habgood, Robert (2018) Investigating the potential of producing alkanes and other fatty acid-derived biofuels using the thermophilic chassis Geobacillus thermoglucosidasius. PhD thesis, University of Nottingham.

Habib, Muddasar (2011) Designing and assessing a novel vertical vibrated particle separator. PhD thesis, University of Nottingham.

Hamidi, Nor Hanimah (2013) Enzymatic depolymerization of lignin by laccases. PhD thesis, University of Nottingham.

Hamilton, Joel A.W. (2017) Investigation into discontinuous low temperature waste heat utilisation from a renewable power plant in rural India for absorption refrigeration. PhD thesis, University of Nottingham.

Hanby, Benjamin, V. T. (2019) Magnetron sputtered thin films and composites for automotive and aerospace electrical insulation. PhD thesis, University of Nottingham.

Hargreaves, George William (2017) Efficient polyester resin synthesis using microwave heating with scale-up from 50 mL to 5 L. PhD thesis, University of Nottingham.

Hegab, Abdelrahman H.I. (2018) Combustion characteristics of methane-diesel dual-fuel engines at light load conditions with different injection strategies. PhD thesis, University of Nottingham.

Herold, Ryan A. (2020) Harnessing metabolic engineering for the production of terpenoids in cyanobacteria. MRes thesis, University of Nottingham.

Hewson, Emma Louise (2008) Multimodal interactions in a carbonated beverage system. PhD thesis, University of Nottingham.

Hiew, Billie Yan Zhang (2020) Adsorption of pharmaceutical and heavy metal contaminants onto three-dimensional graphene based structures. PhD thesis, University of Nottingham.

Ho, Dac Hai Nam (2013) The impact of yeast temperature pre-treatment on bioethanol from corn mash fermentation. MRes thesis, University of Nottingham.

Ho, Mui Yen (2017) Transition metal oxide and phosphate-based/carbon composites as supercapacitor electrodes. PhD thesis, University of Nottingham.

Hodgins, Genevieve R. (2020) Broadline 1H NMR investigations of the mobility of polymers supported on carbonaceous particles and silica substrates. EngD thesis, University of Nottingham.

Hong, Boon Hooi (2020) Novel approach for integrated biomass supply chain synthesis and optimisation. PhD thesis, University of Nottingham.

Hong, Yu (2017) Microwave-enhanced thermal processing of algae. PhD thesis, University of Nottingham.

Hope, Ryan (2022) Metabolic engineering for butanol yield enhancement in Clostridium acetobutylicum. PhD thesis, University of Nottingham.

Hoteit, Camille (2018) The development of an apoferritin-based artificial metalloenzyme for catalysis of sulfide oxidation. MPhil thesis, University of Nottingham.

How, Bing Shen (2018) Novel sustainable evaluation approach for multi-biomass supply chain. PhD thesis, University of Nottingham.

Hromadka, Jiri (2017) Development of multi-parameter fibre optic chemical sensor system based on long period gratings modified with the functional thin films. PhD thesis, University of Nottingham.

Hu, Anran (2016) Mixed polymer hydrophilic matrices containing HPMC and PEO. PhD thesis, University of Nottingham.

Hu, Huaining (2009) Development of continuous microbial fuel cell for renewable energy production from wastewater. PhD thesis, University of Nottingham.

I

Isbell, Todd (2023) Assessment of stress tolerance and fermentation performance in traditional Norwegian Landrace (Kveik) yeast. MRes thesis, University of Nottingham.

Ismail, Muhammad Heikal (2019) Investigating the effect of pre-treatment on the drying kinetics and quality traits of rice noodles. PhD thesis, University of Nottingham.

Ivanova, Natalja (2023) Understanding consumer sensory perception of beer and wine body. PhD thesis, University of Nottingham.

J

Jenkinson, Philip (2016) A new classification system for biomass and waste materials for their use in combustion. EngD thesis, University of Nottingham.

Jevons, Alexander Lee (2022) The impact of composition, environment and hygiene on the microbiome and spoilability of draught beer. PhD thesis, University of Nottingham.

Ji, Qing (2021) High performances niobium oxides based negative electrode for lithium ion batteries. PhD thesis, University of Nottingham.

Jiang, Peng (2020) Gasification-based clean conversions and utilizations of coal, oil shale and biomass. PhD thesis, University of Nottingham.

Johnson, Michael S. (1995) The application of microwave preheating in resin transfer moulding. PhD thesis, University of Nottingham.

Jones, Guy Matthew John (2004) Rheological properties of gelatin, carrageenan and locust bean gum mixtures. PhD thesis, University of Nottingham.

Jourabchi, Seyed Amirmostafa (2015) Production and physicochemical characterisation of bio-oil from the pyrolysis of Jatropha curcus waste. PhD thesis, University of Nottingham.

K

Kalbassi, Mohammed Ali (1987) Distillation sieve tray efficiencies. PhD thesis, University of Nottingham.

Kartini, Alias (2023) Synthesis of Crosslinked Block Copolymer Microparticles in Supercritical CO2. PhD thesis, University of Nottingham.

Keng, Zi Xiang (2024) Sustainable biowaste treatment with open-air & in-vessel composting. PhD thesis, University of Nottingham.

Ketabchi, Mohammad-Reza (2018) Preparation, characterisation and optimisation of cellulose nanoparticles from kenaf fibre and its application in polylactic acid reinforcement. PhD thesis, University of Nottingham.

Khoo, Kuan Shiong (2021) Green approaches and separation techniques for the recovery of pigments from microalgae. PhD thesis, University of Nottingham.

Kim, Junghee (2010) Thermal extraction of bamboo with various solvents. MSc(Res) thesis, University of Nottingham.

Kipping, Michael (2009) Wear and degradation of uhmwpe total hip replacement components. PhD thesis, University of Nottingham.

Kitagawa, Akiharu (2018) Extraction of some heavy metals using ionic liquid systems. MSc(Res) thesis, University of Nottingham.

Knight, Siobhan Megan (2017) Production of enzymes from underutilised crops using biological pretreatment. MPhil thesis, University of Nottingham.

Kortsen, Kristoffer (2023) Dispersion Polymerisations in Supercritical Carbon Dioxide for the Production of Core-Shell Particles. PhD thesis, University of Nottingham.

Koyande, Apurav Krishna (2022) Biorefinery of Chlorella sp. using integrated multiphasic systems for biofuel, feed and wound healing application. PhD thesis, University of Nottingham.

Krishnaiah, Prakash (2017) Development of polylactide and polypropylene composites reinforced with sisal fibres and halloysite nanotubes for automotive and structural engineering applications. PhD thesis, University of Nottingham.

L

LONG, Liang-Ping (2021) Health risk study of trace elements in inhalable particles from Southern Yangtze River Delta Region, China. PhD thesis, University of Nottingham.

Lai, Kar Chiew (2021) Eco-friendly biopolymer integrated three-dimensional hierachichal graphene materials for adsorptive removal of dyes and heavy metals. PhD thesis, University of Nottingham.

Lamond, Alexander Robert (2018) Techno-economic and carbon emissions analysis of biogas utilisation systems in the UK. PhD thesis, University of Nottingham.

Langer, Philipp (2019) Pillar[5]arene/imidazolium based [n]rotaxanes. PhD thesis, University of Nottingham.

Lau, Chun H. (2020) RNA-guided integration of diverse DNA molecules by casposase-Cas9 fusions. PhD thesis, University of Nottingham.

Lawrence, Richard Charles (2013) Carbon from carbon dioxide via molten carbonate electrolysis: fundamental investigations. PhD thesis, University of Nottingham.

Lebeau, Juliana Laurence Dominique (2018) Improving the carbon efficiency in the bio-production of citramalic acid in Escherichia coli. PhD thesis, University of Nottingham.

Leire, Eva Emma Maria (2016) Multifunctional dendrimers for antibacterial applications. PhD thesis, University of Nottingham.

Leong, Wei Dong (2021) An adaptive analytical approach for lean and green framework. PhD thesis, University of Nottingham.

Leong, Yoong Kit (2018) Extraction and purification of green polymers using aqueous two-phase extraction (ATPE). PhD thesis, University of Nottingham.

Lester, Edward (1994) The characterisation of coals for combustion. PhD thesis, University of Nottingham.

Leung, Dexter Hoi Long (2020) Potential of mixed consortium of Enterobacteriaceae and Serratia marcescens in synthetic wastewater treatment and power generation in microbial fuel cell. MPhil thesis, University of Nottingham.

Leung, Ka Kay (2015) Analysis of yeast resistance to lignocellulosic-derived inhibitors. PhD thesis, University of Nottingham.

Liggins, Amanda (2001) Cloning and characterisation of genes encoding molecular recognition proteins from insects. PhD thesis, University of Nottingham.

Lim, Chang Nong (2019) Novel design and development of PDMS-glass hybrid microfluidic devices for continuous double encapsulation of liquid-oil droplets. PhD thesis, University of Nottingham.

Lim, Chun Hsion (2016) Biomass supply chain optimization : consideration of underutilised biomass via element targeting approach. PhD thesis, University of Nottingham.

Lim, Mitchell Shyan Wei (2022) The development of nickel-based heterogeneous catalysts with ultrasonic irradiation for the hydrogenation of plant-based feedstock. PhD thesis, University of Nottingham.

Lim, Zi-Yian (2017) Preparation, modification, and characterisation of Yolk-shell structure based catalysts for synthetic gas production. PhD thesis, University of Nottingham.

Liu, Shuai (2020) Computational study of elemental mercury control using g-C3N4-based adsorbents and catalysts. PhD thesis, University of Nottingham.

Liu, Xin (2017) Facile synthesis of novel activated carbons for the post-combustion capture of CO2. PhD thesis, University of Nottingham.

Lodge, R. W. (2017) Structure and properties of metal nanoparticles on carbon nanostructures. PhD thesis, University of Nottingham.

Lowe, Julian Robert (1993) Void formation in resin transfer moulding. PhD thesis, University of Nottingham.

Luo, Tian (2016) PEGylation of paclitaxel for inhaled chemotherapy. PhD thesis, University of Nottingham.

Luo, Xiang (2016) Hydrogen production from catalytic steam reforming of bio-oil over nano NixMgyO solid solution. PhD thesis, University of Nottingham.

M

Ma, Mingchan (2021) The making of the Ti-6Al-4V alloy by electrolysis of compounded solid oxide precursors in molten calcium chloride. PhD thesis, University of Nottingham.

Madanayake, Buddhike Neminda (2017) Characterization and pre-treatment of Jatropha curcas seed cake for co-firing with coal. PhD thesis, University of Nottingham.

Maia, Carolina (2023) IMPROVING THE FRESHNESS OF PALE LAGER BEERS. PhD thesis, University of Nottingham.

Mallett, James Robert (2020) Assessing the factors affecting draught beer hygiene and validation of a novel dispense system. PhD thesis, University of Nottingham.

Mansfield, Robert Patrick William (2018) Developments in genetic engineering of novel acetogens. PhD thesis, University of Nottingham.

Mao, Yujie (2020) Understanding the extraction of pectin from food waste. PhD thesis, University of Nottingham.

Markandan, Kalaimani (2017) Processing and characterization of atz and ysz-graphene composites for fabrication of mems scale microthruster. PhD thesis, University of Nottingham.

Marrocco, Tiziana (2008) Development of improved cold spray and HVOF deposited coatings. PhD thesis, University of Nottingham.

Martin, Ffion A. (2018) High pressure liquid moulding of composites. EngD thesis, University of Nottingham.

Martin, Gregory Stephen Bernard (2014) Solid-state nuclear magnetic resonance studies of hydrogen storage materials. PhD thesis, University of Nottingham.

Martins, Laura (2020) Towards the bioproduction of methacrylate esters: understanding product toxicity in Escherichia coli. PhD thesis, University of Nottingham.

Mat Aron, Nurul Syahirah (2024) Sustainable extraction and purification of microalgae lipid using liquid biphasic flotation system for production of biofuel. PhD thesis, University of Nottingham.

McBrien, Andrew (1994) Artificial intelligence methods in process plant layout. PhD thesis, University of Nottingham.

McCaldin, Simon Roger (2007) Hydrogen storage in graphitic nanofibres. PhD thesis, University of Nottingham.

McNulty, Rory (2023) Understanding degradation in lithium-ion and lithium-air batteries. PhD thesis, University of Nottingham.

Menchavez, Russel (2020) Host cell engineering for the production of methacrylate esters. PhD thesis, University of Nottingham.

Meng, Yang (2020) Thermal conversion and green utilisation of Chinese oil shale. PhD thesis, University of Nottingham.

Menghao, Chen (2018) Developing a novel in-situ polymerisation process for fully bioresorbable fibre reinforced composites. PhD thesis, University of Nottingham.

Mohammed, Isah Yakub (2017) Pyrolysis of Napier grass to bio-oil and catalytic upgrading to high grade bio-fuel. PhD thesis, University of Nottingham.

Mokogwu, Ikechukwu (2011) Generation and migration of oil from perhydrous Longyear coal. MSc(Res) thesis, University of Nottingham.

Mordaka, Pawel Mateusz (2014) Reductions using Clostridium sporogenes. PhD thesis, University of Nottingham.

Moreno-Martínez, Elena (2019) Resistance of yeast to inhibitors of lignocellulosic bioethanol production. PhD thesis, University of Nottingham.

Muhammed, Tasneem (2021) Technical and economic assessment of process integration in gasoline production. PhD thesis, University of Nottingham.

Murugappan, Viknesh Andiappan (2016) Systematic approaches for synthesis, design and operation of biomass-based energy systems. PhD thesis, University of Nottingham.

Mushtaq, Qasim M. (2022) Investigation of synthesis methods of ZIF-8 membranes for CO2/CH4 separation. PhD thesis, University of Nottingham.

Muthoosamy, Kasturi (2016) Exceedingly biocompatible and thin-layered reduced graphene oxide nanosheets and its application in co-delivery of curcumin and paclitaxel shows highly potent synergistic anticancer effects in A549 and MDA-MB-231 cells. PhD thesis, University of Nottingham.

Muzammal, Shafaq (2021) Molecular interactions of protein-based materials with ionic liquids. PhD thesis, University of Nottingham.

N

Nasios, Konstantinos (2002) Improving Chemical Plant Safety Training Using Virtual Reality. PhD thesis, University of Nottingham.

Nethercott, Alanna Mary (2018) Engineering of a thermostable alcohol dehydrogenase towards imine reduction. PhD thesis, University of Nottingham.

Newbolt, Gary S. (2018) Modelling of biomass milling. EngD thesis, University of Nottingham.

Ng, Lik Yin (2015) Novel integrated design techniques for biorefineries. PhD thesis, University of Nottingham.

Ngan, Sue Lin (2020) Multiple criteria decision analytical tools in assessing risk for green growth: the case of oil palm biomass in Malaysia. PhD thesis, University of Nottingham.

Nichols, David (2020) Impact of aluminosilicate additives on potassium retention during biomass combustion. EngD thesis, University of Nottingham.

Nigar, Farah (2023) Development of calcium phosphates from waste resources and fabrication of calcium phosphate-chitosan composites. PhD thesis, University of Nottingham.

Nishaben Santibhai, Dholakiya (2009) Design and development of visual learning techniques to construct chemical engineering safety knowledge. MPhil thesis, University of Nottingham.

Norman, Rupert O.J. (2019) Genome-scale metabolic modelling of Clostridium autoethanogenum. PhD thesis, University of Nottingham.

Nsamba, Hussein Kisiki (2018) Performance evaluation and modelling of a small-scale biomass gasifier. PhD thesis, University of Nottingham.

O

Oates, Christopher G, (1988) Soya/alginate interactions in extrusion cooking. PhD thesis, University of Nottingham.

Oladejo, Jumoke Mojisola (2018) Thermal analysis of the synergistic influence of the organic and mineral constituents of biomass on coal and biomass fuel blends. PhD thesis, University of Nottingham.

Ooi, Jecksin (2019) The integration of environmental aspects in computer aided molecular design framework. PhD thesis, University of Nottingham.

P

PARVEZ, Ashak Mahmud (2017) A study of CO2 gasification of solid carbonaceous wastes for CO2 mitigation and chemical production. PhD thesis, University of Nottingham.

Pakalapati, Harshini (2019) Development of polycaprolactone based controlled release fertilizer for mung bean crop. PhD thesis, University of Nottingham.

Panteloglou, Apostolos (2013) Malt induced premature yeast flocculation: its origins, detection and impacts upon fermentation. PhD thesis, University of Nottingham.

Parr, Hebe (2022) Control of malt roasting operations for consistent delivery of desired product flavour. PhD thesis, University of Nottingham.

Partridge, Suzanne J. (2018) Elucidating the biosynthesis of the aphid sex pheromone. PhD thesis, University of Nottingham.

Patel, Arjun (2021) Pillar[5]arene based molecular machines. PhD thesis, University of Nottingham.

Pendlebury, Toby (2022) HETEROGENEITY IN BREWING YEAST POPULATIONS. PhD thesis, University of Nottingham.

Pensupa, Nattha (2015) The development of a biological pretreatment strategy for the conversion of wheat straw to biofuels or platform chemicals. PhD thesis, University of Nottingham.

Pepper, Katie Jayne (2019) High pressure rheology: a probe for formulation development. PhD thesis, University of Nottingham.

Perkins, Joseph A. (2020) Advanced image analysis to characterise coal and predict burnout potential. EngD thesis, University of Nottingham.

Peter, Angela Paul (2022) Sustainable cultivation of microalgae biomass for bioenergy production. PhD thesis, University of Nottingham.

Pitchaimuthu, Diban (2019) Process optimisation for oil and gas platform with process integration techniques. PhD thesis, University of Nottingham.

Price, Timothy Simon (2008) Cold gas dynamic spraying of titanium coatings. PhD thesis, University of Nottingham.

Price, Tobias E.C. (2010) Multi-component complex hydrides for hydrogen storage. PhD thesis, University of Nottingham.

R

Rahman, Asad (2017) Synthesis and performance analysis of ammonium dinitramide. PhD thesis, University of Nottingham.

Ramarad, Suganti (2016) Improving the properties of reclaimed waste tire rubber by blending with poly(ethylene-co-vinyl acetate) and electron beam irradiation. PhD thesis, University of Nottingham.

Ratcliffe, Jonathan Albert (2011) Three dimensional cell reconstructions for morphological analysis and modelling. PhD thesis, University of Nottingham.

Raviadaran, Revathi (2021) Process and optimization of palm-oil based water-in-oil-in-water (W/O/W) multiple nanoemulsion encapsulating tocotrienols and caffeic acid with cisplatin as a synergistic anticancer treatment. PhD thesis, University of Nottingham.

Razzaque, Md Abdur (2016) Development and assessment of a fast pyrolysis reactor for bio-oil, syngas and bio-char production from biomass residues. PhD thesis, University of Nottingham.

Rison, J.R.A. (2017) Meeting the needs of the people and the forest: woodfuel and woodland management across the United Kingdom’s Midlands. PhD thesis, University of Nottingham.

Roullier, Benjamin David (2017) Modelling the local environmental impact of underground coal gasification. EngD thesis, University of Nottingham.

Rowe, Peter (2018) Development of molecular tools for optimisation of C1 gas fermentation in acetogens. PhD thesis, University of Nottingham.

Russell, Scott H. (2018) Development of a carbon neutral process for producing renewable charcoal. EngD thesis, University of Nottingham.

Ryan, John (2022) Polymer from pyrolysis liquid: pyrolymer. PhD thesis, University of Nottingham.

S

Sabard, Alexandre (2020) Solution heat treatment of gas-atomised aluminium alloy powder for cold spray. PhD thesis, University of Nottingham.

Safo, Laudina (2018) Quantitative measurement of intracellular metabolic changes in Clostridium autoethanogenum using liquid chromatography isotope dilution mass spectrometry. PhD thesis, University of Nottingham.

Sankaran, Revathy (2018) Development of an efficient protein recovery system using liquid biphasic flotation. PhD thesis, University of Nottingham.

Sarce Thomann, Fernando (2016) Hygrothermal modelling as a top-down design tool for mesoporous desiccants. PhD thesis, University of Nottingham.

Scally, Kenneth (2013) Dating kerosene releases. PhD thesis, University of Nottingham.

Sheikh, Taimur Mazhar (2022) Effects of ultra-oxidized graphene oxide on the hydration of cement. PhD thesis, University of Nottingham.

Shepherd, Benjamin John (2020) Development of a liquid inerted microwave pyrolysis process. PhD thesis, University of Nottingham.

Shi, Kaiqi (2015) Microwave-enhanced pyrolysis of biomass coupled with catalytic reforming for hydrogen production. PhD thesis, University of Nottingham.

Shi, Weibin (2018) Dynamic modelling and simulation of turbulent bubbly flow in bubble column reactors. PhD thesis, University of Nottingham.

Shortall, Orla (2015) Rethinking bioenergy from an agricultural perspective: ethical issues raised by perennial energy crop and crop residue production for energy in the UK and Denmark. PhD thesis, University of Nottingham.

Silvester, Laurence Paul Joseph (2020) Mineral transformation, ash formation and characterisation during pulverised fuel combustion. EngD thesis, University of Nottingham.

Simmons, Mark John Harry (1998) Liquid-liquid flows and separation. PhD thesis, University of Nottingham.

Simpson, Brittany (2020) Total synthesis of plant-derived phenolic natural products. MRes thesis, University of Nottingham.

Smith, Jacob (2022) A multi-faceted approach to dye remediation with layered double hydroxides, synthesised by continuous hydrothermal method. PhD thesis, University of Nottingham.

Soh, Chiaw Min (2014) Fluidization bed coating of copper bars with epoxy powder. MPhil thesis, University of Nottingham.

Spadoni, Damiano (2022) Computational investigation on the mechanism of oxygen tolerance in the radical SAM enzyme lysine 2,3-aminomutase. PhD thesis, University of Nottingham.

Spagna, Francesca (2021) Designing Green Oxidation Reactions with Sulfoxides. PhD thesis, University of Nottingham.

Spencer, Jennifer (2018) Metabolic engineering of the thermophile Geobacillus to produce the advanced biofuel N-butanol. PhD thesis, University of Nottingham.

Stead, Christopher Edward (2019) Bio-conversion of methane to liquid transportation fuel using methanotrophic bacteria. PhD thesis, University of Nottingham.

Still, Kristoffer (2018) Enzyme focused process engineering: evaluating the influence of complex process environments on enzyme activity. PhD thesis, University of Nottingham.

Stimpson, Amy (2020) Synthesis of dispersants to generate fillers for composites designed to have an enhanced echogenic response. PhD thesis, University of Nottingham.

Stirling, Robert John (2019) An investigation into the impact of hydrothermal carbonisation on the suitability of biomass for fuel switching. EngD thesis, University of Nottingham.

Strecker, P.G. (2015) The sensitivity of brewing micro-organisms to silver. PhD thesis, University of Nottingham.

Sumair, Faisal Ahmed (2018) Preparation and characterisation of eutectic nanofluids for heat transfer enhancement in flat plate solar collectors. PhD thesis, University of Nottingham.

T

Tan, Chung Hong (2020) Exploration of microalgal culture using a semi-closed thin layer cascade photobioreactor for biodiesel synthesis and protein production. PhD thesis, University of Nottingham Malaysia.

Tang, Doris Ying Ying (2023) Evaluation of mixed microalgae species biorefinery of Desmodesmus sp. And Scenedesmus sp. For bioproducts synthesis. PhD thesis, University of Nottingham.

Tang, Jiang Ping (2018) Palm biomass supply management : a predictive analysis tool. PhD thesis, University of Nottingham.

Taqi, Ali A. M. A. (2022) Understanding the influence of microwave heating on biomass-solvent extraction. PhD thesis, University of Nottingham.

Telepeni, Irvin Petelo Lose (2009) Investigation of dihydrogen interactions with activated graphitic nanostructures and novel metal-organic frameworks. PhD thesis, University of Nottingham.

Ten, Joon Yoon (2018) The integration of safety and health aspects in chemical product design framework. PhD thesis, University of Nottingham.

Tham, Thing Chai (2018) Improving drying efficiency and energy saving for crumb natural rubber drying with combined drying technologies. PhD thesis, University of Nottingham.

Thomas, George (2022) Fluidity development of coking coal. EngD thesis, University of Nottingham.

Tilley, Clemency (2022) Understanding carbon flux of a heterologous metabolic pathway in Escherichia coli for sustainable methyl methacrylate biosynthesis. PhD thesis, University of Nottingham.

Tiong, Yong Wei (2019) Coupling of Incl3-bails for catalytic conversion of oil palm biomass to levulinic acid and upgrading to ethyl levulinate biofuel. PhD thesis, University of Nottingham.

Townsend, Toby J. (2014) Agronomic, economic and environmental analyses of dual-purpose wheat cultivars for bioenergy. PhD thesis, University of Nottingham.

Turner, Matthew Richard (1998) Tow placement studies for liquid composite moulding. PhD thesis, University of Nottingham.

U

Uguna, Jacob Onyebuolise (2016) Maturity, oil source rock and retorting potential of perhydrous coals in the Central Tertiary Basin, Spitsbergen. PhD thesis, University of Nottingham.

Ukeje-Eloagu, Chibuike Igbokwe (1998) Tray efficiency effects in batch distillation. PhD thesis, University of Nottingham.

Ul Hai, Irfan (2017) Bubbling fluidized bed biomass gasification and product gas cleaning. PhD thesis, University of Nottingham.

V

Vallance, Simon (2009) Microwave synthesis and mechanistic examination of the transition metal carbides. PhD thesis, University of Nottingham.

Van Hagen, Alexander Marcus William (2020) Development of an enhanced enzyme engineering framework towards improved ethylene productivity. PhD thesis, University of Nottingham.

Vaud, Sophie (2019) Development of high-throughput genome editing tools towards ethylene production in Cupriavidus species. PhD thesis, University of Nottingham.

Vazquez-Peraita, Lola (2022) Towards sustainable energy and fuels from waste pathways for the UK. EngD thesis, University of Nottingham.

Vidales Herrera, Jessica Vidales (2023) Microwave-assisted polymer synthesis of polycondensation materials for high performance coatings. PhD thesis, University of Nottingham.

W

Wakerley, James Kenneth Malcolm (2023) Material discovery and modelling for solid-state hydrogen storage and fuel cell applications. PhD thesis, University of Nottingham.

Walker, Edward (2014) Continuous flow microwave catalytic chain transfer polymerisation of methyl methacrylate oligomers. PhD thesis, University of Nottingham.

Wallgrén, Kirsi (2005) Novel amperometric gas sensors. PhD thesis, University of Nottingham.

Wan, Yoke Kin (2016) Syhthesise [sic] a sustainable sago industry. PhD thesis, University of Nottingham.

Wang, Bin (2021) Investigation on the quantitative analysis and upgrading of recycled plastic composites and blends. PhD thesis, University of Nottingham.

Weilhard, Andreas Sebastian (2019) Novel catalytic systems for carbon dioxide activation. PhD thesis, University of Nottingham.

Wheildon, Andrew R. (1999) Novel nitrogen chemistry. PhD thesis, University of Nottingham.

Wichlacz, Alexander Tomas (2018) Development of probing strategies to investigate metabolic flux of biofuel production pathways in Clostridia. PhD thesis, University of Nottingham.

Wilkinson, Stuart (2016) Barley derived spent grains: conversion to bioethanol. PhD thesis, University of Nottingham.

Williams, Orla (2016) On biomass milling for power generation. EngD thesis, University of Nottingham.

Wong, Voon Loong (2015) Computational studies of shear-dependent non-newtonian droplet formation at microfluidics T-junction with experimental justification. PhD thesis, University of Nottingham.

Wong, Xin Yi (2021) Design, development and application of protein-templated gold nanoclusters in biosensing of glutathione, sodium and potassium ions. PhD thesis, University of Nottingham Malaysia.

Woodward, Alison Francesca (2017) Laccase-catalysed depolymerisation of lignin model oligomers. PhD thesis, University of Nottingham.

Wright, Jonathan P. (2007) Tea flavour : delivery and perception. PhD thesis, University of Nottingham.

Wu, Shenyi (1999) Investigation of ejector re-compression absorption refrigeration cycle. PhD thesis, University of Nottingham.

Wu, Yi-yi (2017) Dynamic simulation and modelling of chemical vapour deposition process. PhD thesis, University of Nottingham.

X

Xavier, Deeviya Francis (2017) Treatment of anaerobically digested palm oil mill effluent (POME) using JERING (Archidendron jiringa) seeds as a novel plant-based coagulant. MPhil thesis, University of Nottingham.

Xu, Jie (2017) Polymerization mechanism, micro-macro properties, and carbonization of polyurethane foams. PhD thesis, University of Nottingham.

Y

Yan, Jie-Feng (2015) Microwave-induced co-processing of coal and biomass. PhD thesis, University of Nottingham.

Yao, Linbin (2021) Mechanistic studies of first-row transition metal catalyzed homogeneous CO2 reduction via H2 using density functional theory. PhD thesis, University of Nottingham.

Yap, Jing Ying (2022) Effects of drying conditions on drying kinetics, product quality and retention of carpaine in papaya leaves (Carica papaya Linn.). PhD thesis, University of Nottingham.

Yee, Swee Li Maxine (2018) Silver-based nanocomposite materials for marine antifouling applications. PhD thesis, University of Nottingham.

Yew, Guo Yong (2021) Lipid extraction from thermal Fenton reaction in hybrid liquid biphasic system for biofuel and rubber bio-additive compounds. PhD thesis, University of Nottingham.

Yin, Kam Hoe (2015) Dynamic optimisation for energy efficiency of injection moulding process. PhD thesis, University of Nottingham.

Yorke, Joanna (2022) Sensory and analytical impacts of unmalted cereal adjunct usage in lager brewing. PhD thesis, University of Nottingham.

Yusuf, Abubakakar (2020) Cost-effective transition metal based catalysts for low-temperature formaldehyde oxidation. PhD thesis, University of Nottingham.

Z

Zangrossi, Francesco (2021) R&D of carbon nanotubes based nanocomposites for self-heating and de-icing applications. PhD thesis, University of Nottingham.

Zelzer, Mischa (2022) Modelling of N-carboxy anhydride copolymerisations for improved sequence control of poly(amino acid)s in bioengineering applications. MRes thesis, University of Nottingham.

Zhang, Hui (2020) Rice bran wax oleogel in an oil-in-water emulsion system. PhD thesis, University of Nottingham.

Zhang, Liwen, Song, Fengjuan and Zhao, Haitao (2021) The development of catalysts and adsorbents for enhanced elemental mercury removal at ESPs and FGDs at coal-fired power stations. MRes thesis, University of Nottingham.

Zheng, Yitao (2021) Investigation into the improvement of recycled polypropylene for use in automobile manufacturing. PhD thesis, University of Nottingham.

Zhu, Jing (2015) Polymer-mediated crystallisation of proteins. PhD thesis, University of Nottingham.

This list was generated on Tue Mar 19 07:34:41 2024 UTC.