• Login
• Admin

DeLaney, Erica Noel (2018) Photochemistry and electrochemistry in continuous flow toward integrated processes. PhD thesis, University of Nottingham.

PDF (Thesis - as examined) - Repository staff only - Requires a PDF viewer such as GSview, Xpdf or Adobe Acrobat Reader Download (37MB) Request Thesis

Abstract

This thesis describes how continuous flow photochemical and electrochemical reactions can contribute to sustainable synthesis, particularly when coupled to on-line analysis techniques or used as part of a multi-step synthetic process. Chapter 1 introduces photochemistry as a sustainable technique, the problems that have previously been associated with performing photochemical reactions in batch, and presents the potential benefits of performing photochemistry in continuous flow. Chapter 2 describes the UV photochemical reactor that was built as part of this Thesis, which uses monochromatic excimer lamps (KrCl = 222 nm, XeBr = 282 nm, and XeCl = 308 nm) as the reaction light source. Results from two initial model reactions, the [2+2] cycloaddition of maleimide with 1-hexyne and the photo-isomerisation of β ionone are presented in addition to chemical actinometry measurements of the radiant exitance of each excimer lamp.

Chapters 3 and 4 report the outcomes of two of the chemical reactions that were studied in the excimer reactor. In Chapter 3 results obtained for the photodecarboxylative cycloaddition of 4-phthalimidobuytric acid are presented, including the effects of sensitising solvent and irradiation wavelength dependence. This chapter also describes the integration of the photochemical reactor with a second acid catalysis step by performing an acid catalysed dehydration of the photoproduct. Both the photo-reaction and the dehydration were performed in flow from a single reagent steam. Chapter 4 describes the photochemical isomerisation of 2-pyridone in the continuous excimer flow reactor. Our reactor allowed for a more efficient reaction than comparable batch reactions. The conversion of starting material in this reaction was successfully monitored by in-line flow UV-Vis spectroscopy using a miniature UV-Vis spectrometer.

Chapter 5 briefly introduces electrochemistry in continuous flow, which, like photochemistry, is an under utilised “reagent-less” technique that can benefit from being performed in continuous flow reactors. Specifically, the work described in Chapter 5 involved separating the hydrogen gas produced during electrochemical reactions performed in a commercially available electrochemical flow reactor, so that on-line analysis could more easily be integrated with the reactor. The methoxylation of N-formylpyrolidine was chosen as a model reaction in an attempt to incorporate in-line Raman spectroscopy with the electrochemical reactor. Secondly, the methoxylation of 4-tert-butyltoluene was used as the model reaction for assimilating the electrochemical reactor with on-line GC analysis. After separating the hydrogen gas from the reaction by a simple gravity separation, both techniques were capable of providing in/on-line analysis results. However, the GC experimental set-up proved to give better results as the reaction set-up had a smaller dead volume and therefore required less equilibration time.

All relevant experimental details and reactor standard operating procedures are given in Chapter 6 with supplementary information provided where necessary in the appendices. The overall conclusions for this Thesis and recommendations for future work are collected in Chapter 7.

Item Type:	Thesis (University of Nottingham only) (PhD)
Supervisors:	Poliakoff, Martyn George, M. W.
Subjects:	Q Science > QD Chemistry > QD450 Physical and theoretical chemistry T Technology > TP Chemical technology
Faculties/Schools:	UK Campuses > Faculty of Science > School of Chemistry
Item ID:	55467
Depositing User:	DeLaney, Erica
Date Deposited:	05 Apr 2019 10:04
Last Modified:	11 Dec 2020 04:30
URI:	https://eprints.nottingham.ac.uk/id/eprint/55467

Actions (Archive Staff Only)

Edit View