• Login
• Admin

Abdul Jabbar, Mohamed Haroon (2019) Design and development of dialysate temperature control module prototype for hemodialysis. PhD thesis, University of Nottingham.

Abdullah, Mohd Khairi John (2024) Improving machine vision crack die detection with multi-kernel learning SVM. PhD thesis, University of Nottingham.

Abebe, Robert (2018) End winding mount integrated motor drive. PhD thesis, University of Nottingham.

Abu-Jalala, Al-Hussein (2021) Performance improvement of synchronous generators through accurate modelling and integration of power electronics. MPhil thesis, University of Nottingham.

Acuña Ureta, David E. (2020) Theoretical foundations of uncertain event prognosis and predictive Bayesian Cramer-Rao bounds. PhD thesis, University of Nottingham.

Adamu, Murtala Zungeru (2013) Energy-efficient routing algorithms based on swarm intelligence for wireless sensor networks. PhD thesis, University of Nottingham.

Agbedahunsi, Alex Taiwo (2013) Frequency control for microgrids using enhanced STATCOM and supercapacitor energy storage. PhD thesis, University of Nottingham.

Ahmed, Mohamed Huzam (2019) Modelling a grid connected distributed generating photovoltaic system for the capital city of Maldives : an engineering and economic assessment. MPhil thesis, University of Nottingham.

Ahmed, Sanjana (2019) Assessing the benefits of storage applied to energy communities. PhD thesis, University of Nottingham.

Akdogan, Volkan (2016) Thermoelectric power generator for automotive applications. PhD thesis, University of Nottingham.

Akpolat, Zuhtu Hakan (1999) Application of fuzzy-sliding mode control and electronic load emulation to the robust control of motor drives. PhD thesis, University of Nottingham.

Al-Timimy, Ahmed Abdul Al-Kareem Hussen (2019) Advancing the design and modelling processes for high performance electrical machines. PhD thesis, University of Nottingham.

Albatati, Faisal Ali S. (2015) Investigation of environmentally friendly power generation systems for low-grade waste heat recovery. PhD thesis, University of Nottingham.

Aliyu, Attahir Murtala (2017) On-board health monitoring of power modules in inverters driving induction motors. PhD thesis, University of Nottingham.

Alotaibi, Saleh (2023) Unlocking the potential of electric vehicles to enhance large-scale photovoltaic solar energy integration into grid systems - a case for Saudi Arabia. PhD thesis, University of Nottingham.

Alshebly, Yousif Saad (2024) Development of 4D-printed shape memory polymer actuators for induced-strain shape change. PhD thesis, University of Nottingham.

Altarawneh, Sanad (2023) Unravelling the underpinning mechanisms associated with the microwave treatment of electric arc furnace dust with polyvinyl chloride: an electromagnetic and kinetic investigation. PhD thesis, University of Nottingham.

Aman, Asma Mohammad Nusrat (2023) The development and performance evaluation of Particle Filter–H∞ Filter for attitude estimation of a small satellite in low earth orbit. PhD thesis, University of Nottingham.

Arumugam, Puvaneswaran (2013) Design and modelling of permanent magnet machine's windings for fault-tolerant applications. PhD thesis, University of Nottingham.

Athab, Ahmed Dhahir (2020) Validating the SubSAR technique for buried feature detection using satelllite SAR data. PhD thesis, University of Nottingham.

Bao, Yuli (2020) Analysis, design and optimization of synchronous reluctance machines (SynRels) for improved performance considering different rib configurations. PhD thesis, University of Nottingham.

Bardalai, Anuvav (2019) Winding AC loss reduction techniques in the slot of high – frequency electrical machines. PhD thesis, University of Nottingham.

Basarudin, Hanim (2020) Optimal sizing of standalone hybrid energy system using a novel multi-objective evolutionary algorithm. PhD thesis, University of Nottingham.

Bersch, Kevin (2019) Thermal optimisation of the stator vent design for a synchronous generator. PhD thesis, University of Nottingham.

Bishop, Matthew T. (2019) Single-source precursor deposition of low-toxicity sulphides for thin film photovoltaic devices. PhD thesis, University of Nottingham.

Blasco Giménez, Ramón (1995) High performance sensorless vector control of induction motor drives. PhD thesis, University of Nottingham.

Blissett, Jonathan (2019) A wholistic motor design philosophy for electric motorcycles in motorsport. PhD thesis, University of Nottingham.

Bottomley, Jack S. (2014) Self-sensing permanent magnet servo motors. PhD thesis, University of Nottingham.

Bouzoukas, Asterios (2008) New approaches for cooling photovoltaic/thermal (PV/T) systems. PhD thesis, University of Nottingham.

Buckley, Gary (2017) Fault detection and tolerance of electrical machines in automotive applications. PhD thesis, University of Nottingham.

Castle, Jack (2019) Polyoxometalates as redox mediators for Li-air batteries. MSc(Res) thesis, University of Nottingham.

Chae, Jung Hoon (2014) Supercapacitors with neutral aqueous electrolytes. PhD thesis, University of Nottingham.

Chee, Hock Leong (2023) Non-volatile FPGA architecture based on Resistive Random-Access Memory. PhD thesis, University of Nottingham.

Chen, Jingsi (2010) Towards single photon detection with a practical EMCCD. MSc(Res) thesis, University of Nottingham.

Chen, Yuzheng (2023) High speed green-taxiing motor-generator drive system for mild hybridization of turboprop aircraft. PhD thesis, University of Nottingham.

Chong, Lee Wai (2020) Intelligent renewable energy storage and management system for rural household. PhD thesis, University of Nottingham.

Daley, Patrick James (2019) An optimised advanced ash fusion test for power generators. EngD thesis, University of Nottingham.

De Gaetano, Daniele (2022) On multi-phase machines and current harmonic injection for torque capability improvement. PhD thesis, University of Nottingham.

De Lillo, Liliana (2006) A matrix converter drive system for an aircraft rudder electro-mechanical actuator. PhD thesis, University of Nottingham.

Dedenbach, Johannes (2016) Low cost, high integrity plasmatron joining for automotive body in white manufacture. PhD thesis, University of Nottingham.

Di Nardo, Mauro (2017) Design of high speed synchronous reluctance machine. PhD thesis, University of Nottingham.

Dias Ferreira, Lais (2021) Fundamental studies of ionic liquid electrolytes aiming at application in Na metal-based batteries. PhD thesis, University of Nottingham.

Diaz, Matias (2017) Control of the modular multilevel matrix converter for wind energy conversion systems. PhD thesis, University of Nottingham.

Dimogiannis, Konstantinos (2023) Investigating solid electrolyte interphases on negative electrodes for beyond lithium-ion batteries. PhD thesis, University of Nottingham.

Duan, Yu (2012) A comparison of saliency based sensorless control techniques for a PM machine. PhD thesis, University of Nottingham.

Dube, Swaraj Sunilkumar (2023) Edge computing techniques for classification based multi-task incremental learning. PhD thesis, University of Nottingham.

Dusek, Jiri (2017) Machines with non-conventional topologies for more electric applications. PhD thesis, University of Nottingham.

Ebrahim, Mohammed Taha (1995) A very high speed switched reluctance generator. PhD thesis, University of Nottingham.

ElHassan, Nemat Hassan Ahmed (2017) Development of phase change memory cell electrical circuit model for non-volatile multistate memory device. PhD thesis, University of Nottingham.

Elmer, Theo (2015) A novel SOFC tri-generation system for building applications. PhD thesis, University of Nottingham.

Fallows, Daniel James Alfred (2022) Exciterless solutions for medium-power wound-field synchronous generators. PhD thesis, University of Nottingham.

Fatehi, Kavan (2024) Self-supervised learning for automatic speech recognition In low-resource environments. PhD thesis, University of Nottingham.

Felton, James (2023) The Fundamental Interactions Between Hydrogen and group III-VI and IV-VI van der Waals Crystals. PhD thesis, University of Nottingham.

Galassini, Alessandro (2018) Distributed speed control for multi-three-phase motors with enhanced power sharing capabilities. PhD thesis, University of Nottingham.

Galea, Michael (2013) High performance, direct drive machines for aerospace applications. PhD thesis, University of Nottingham.

Gao, Fei (2016) Decentralised control and stability analysis of a multi-generator based electrical power system for more electric aircraft. PhD thesis, University of Nottingham.

Gargalis, Leonidas (2021) Optimisation of silicon content in Fe-Si alloys processed via Laser Powder Bed Fusion for an additively manufactured soft magnetic core. PhD thesis, University of Nottingham.

Garibaldi, Michele (2018) Laser additive manufacturing of soft magnetic cores for rotating electrical machinery: materials development and part design. PhD thesis, University of Nottingham.

Gibson, Andrew (2017) Resonant core spectroscopies of model molecular solar cells. PhD thesis, University of Nottingham.

Giyani, Baker (2023) Microwave processing of ores. PhD thesis, University of Nottingham.

Goh, Shu Mei (2024) A prototype for a real-time power fluctuation events prediction and mitigation engine for photovoltaic (PV) grid-tied systems. PhD thesis, University of Nottingham Malaysia.

Goodman, Andrew Simon (2007) Direct energy converter controllers for switched reluctance motor operation. PhD thesis, University of Nottingham.

Grundy, Andrew (2012) Congestion control framework for delay-tolerant communications. PhD thesis, University of Nottingham.

Hadri, Omar (2022) Asset management of ageing nuclear power plant systems. PhD thesis, University of Nottingham.

Han, Ming-En (2021) The electrification of the built environment and transport through the utilisation of multi-vector community energy systems. PhD thesis, University of Nottingham.

Hard, Kevin (2005) PEM fuel cell multi-phase system. PhD thesis, University of Nottingham.

Hart, Jack (2023) Core-Level Spectroscopy of Photoactive Materials. PhD thesis, University of Nottingham.

Herring, Jonathan L. (1993) Developments in the transmission-line modelling method for electromagnetic compatibility studies. PhD thesis, University of Nottingham.

Holmes, Niall (2020) Active magnetic shielding systems for wearable magnetoencephalography. PhD thesis, University of Nottingham.

Hua, Yahan (2009) Sensorless control of surface mounted permanent magnet machine using fundamental PWM excitation. PhD thesis, University of Nottingham.

Huang, Junqi (2021) Energy efficient and runtime based approximate computing techniques for image processing applications: an integrated approach covering circuit to algorithmic level. PhD thesis, University of Nottingham.

Hussein, Abdallah Suliman (2019) SiC-based power electronics for wind energy applications. PhD thesis, University of Nottingham.

Jasim, Omar (2010) An extended induction motor model for investigation of faulted machines and fault tolerant variable speed drives. PhD thesis, University of Nottingham.

Jayamaha, Prasanthi Charmalee (2015) Energy storage for frequency support in weak electrical grids. PhD thesis, University of Nottingham.

Jiang, Hui (2012) Audible noise reduction in the high frequency injection based sensorless torque control for EPS applications. PhD thesis, University of Nottingham.

Kalita, Karuna (2007) Integrating rotordynamic and electromagnetic dynamic models for flexible-rotor electrical machines. PhD thesis, University of Nottingham.

Kampisios, Konstantinos T. (2010) Electrical machines parameter identification using genetic algorithms. PhD thesis, University of Nottingham.

Karimi, Gilbert (2019) Corrosion of hardfacings for nuclear (PWR) applications. PhD thesis, University of Nottingham.

Khan, Md. Shahrukh Adnan (2017) Low cost vertical axis wind energy harvesting system using supercapacitors for rural Malaysia. PhD thesis, University of Nottingham.

Khera, Fatma (2021) Analysis, design and evaluation of quasi Z-Source modular multilevel converter. PhD thesis, University of Nottingham.

Kho, Xiang Juan (2023) Test process optimisation through big data analysis. MPhil thesis, University of Nottingham.

Khowja, Muhammad Raza (2019) Integrated passive filter inductors for motor drive applications. PhD thesis, University of Nottingham.

Knott, Andrew N. (2018) 3D printing of light trapping structures for dye-sensitised solar cells. PhD thesis, University of Nottingham.

Kone, Jean-Paul (2018) CFD modelling and simulation of multiphase flow in a PEM fuel cell using OpenFOAM. PhD thesis, University of Nottingham.

Kong, Jia Hao (2018) Low-complexity, low-area computer architectures for cryptographic application in resource constrained environments. PhD thesis, University of Nottingham.

Korman, Oguz (2024) Design and modelling techniques for performance improvement of synchronous reluctance machines. PhD thesis, University of Nottingham.

Kounnos, Petros (2018) Hierarchical control framework to exploit community energy storage for both local and system benefit. PhD thesis, University of Nottingham.

Kow, Ken Weng (2020) An intelligent power management system with active learning prediction engine for pv grid-tied systems. PhD thesis, University of Nottingham.

Kutlu, Cagri (2020) A novel a-Si PV/T solar cogeneration system using the coupled thermal storage/ORC as an alternative to battery. PhD thesis, University of Nottingham.

La Rocca, Antonino (2016) Thermal analysis of a high speed electrical machine. PhD thesis, University of Nottingham.

La Rocca, Salvatore (2019) Thermal modelling of a totally enclosed fan-cooled electrical machine. PhD thesis, University of Nottingham.

Law, Kah Haw (2015) Enhanced decoupling current scheme with selective harmonic elimination pulse width modulation for cascaded multilevel inverter based static synchronous compensator. PhD thesis, University of Nottingham.

Lawan, Abdurrahman Umar (2019) Enhanced decoupled current control with compensation algorithm for modular multilevel converter based static synchronous compensator. PhD thesis, University of Nottingham.

Le Quesne, John (1997) Organic materials for photovoltaic devices. PhD thesis, University of Nottingham.

Lee, Meng Yeong (2009) Three-level neutral-point-clamped matrix converter topology. PhD thesis, University of Nottingham.

Lei, Shurong (2019) Heat-pipe based thermal management designs for Lithium-ion batteries. PhD thesis, University of Nottingham.

Li, Jiaqi (2021) Vibration analysis and investigation of synchronous reluctance motor. PhD thesis, University of Nottingham.

Li, Yuexiang (2016) An investigation of automatic processing techniques for time-lapse microscope images. PhD thesis, University of Nottingham.

Li, Yuezhao (2020) Novel cascaded control systems for microfluidic devices. PhD thesis, University of Nottingham.

Liiro Peluso, Letizia (2023) Thin Films for Organic-based Optoelectronics: Chemical and Physical Characterization using Atomic Force Microscopy and Tools for Sub-molecular Level Structure Information. PhD thesis, University of Nottingham.

Lin, Lih Poh (2022) Greenly synthesised biocompatible graphene/zirconia nanocomposite: towards the development of a biosensor for the detection of lung cancer biomarkers. PhD thesis, University of Nottingham.

Liu, Chuan (2020) Experimental investigation of oil spray cooling in electrical machines with hairpin windings. PhD thesis, University of Nottingham.

Liu, Tian-Hui (2020) Developing cathode and electrolyte materials for intermediate temperature solid oxide fuel cells. PhD thesis, University of Nottingham.

Liu, Xiao (2021) Design, development and characterisation of a building integrated photovoltaic smart window system for electricity generation and adaptive daylighting control. PhD thesis, University of Nottingham.

Llamas-Orozco, Jorge Armando (2023) Dynamic life cycle assessment of lithium-ion batteries for electric vehicles. PhD thesis, University of Nottingham.

Low, Sze Shin (2018) Graphene/zinc oxide nanocomposite : a versatile platform for electrochemical-based genosensor. PhD thesis, University of Nottingham.

Low, Wei Hau (2021) Hybridisation of mixed transition metal oxide with graphene as advanced electrode material for symmetric supercapacitor application. PhD thesis, University of Nottingham.

M, Arya Lekshmi (2022) Modelling, fabrication, and characterization of memristor for mitigating the sneak path current in a nano-crossbar memory array. PhD thesis, University of Nottingham Malaysia.

Ma, Xiaoli (2004) Investigation of novel thermoelectric refrigeration systems. PhD thesis, University of Nottingham.

Mak, Kuok Hang (2011) Vibration modelling and analysis of piezoelectric energy harvesters. PhD thesis, University of Nottingham.

Mann, Sophie (2022) An investigation into the relationship between synthetic aperture radar (SAR) data and beach sediment grain size. MRes thesis, University of Nottingham.

Manon, Alexandre (2023) Electrical conductivity enhancement of alkaline earth titanates for high-temperature thermoelectric applications. PhD thesis, University of Nottingham.

Mason, Nicholas J. (2011) Space vector modulation of a 4-leg matrix converter. PhD thesis, University of Nottingham.

Mayor, Louise Charlotte (2009) The adsorption and charge-transfer dynamics of model dye-sensitised solar cell surfaces. PhD thesis, University of Nottingham.

McCartney, Damon Andrew (2013) Development of the AnimalSeek method to evaluate the localisation ability of children under five. PhD thesis, University of Nottingham.

McNulty, Rory (2023) Understanding degradation in lithium-ion and lithium-air batteries. PhD thesis, University of Nottingham.

Micallef, Christopher (2006) End winding cooling in electric machines. PhD thesis, University of Nottingham.

Mistry, Priyen C. (2016) Coated metal hydrides for stationary energy storage applications. PhD thesis, University of Nottingham.

Mohamed Elsherif, Mohamed Assad Hashem (2016) Mapping multiplexing technique (MMT): a novel intensity modulated transmission format for high-speed optical communication systems. PhD thesis, The University of Nottingham.

Mohammad Naim, Nur Nafisah (2015) Modelling the ageing behaviour of supercapacitors using electrochemical impedance spectroscopy for dynamic applications. PhD thesis, University of Nottingham.

Mohammed, Ahmed M. (2017) Considerations on the use of solid material for high performance, tubular linear motors. PhD thesis, University of Nottingham.

Morley, Andrew (2018) Advances in numerical modelling of waveguide discontinuities in a microwave receiver protector. MRes thesis, University of Nottingham.

Muller-Pollmann, Nicolas (2021) Energy storage for complementary services in grid-tied PV systems. PhD thesis, University of Nottingham.

Murataliyev, Mukhammed (2021) Novel sizing and modeling techniques for synchronous reluctance machines. PhD thesis, University of Nottingham.

Najeeb, Najla (2017) Design, fabrication and evaluation of a label-free silicon-on-insulator “Lab on a Chip” optical biosensor. PhD thesis, University of Nottingham.

Narayanan, Sridhar (2019) Engine-driven synchronous generators: design considerations for grid code compliance. PhD thesis, University of Nottingham.

Naylor, Phillip (1986) Coupling between electromagnetic waves and wires using transmission-line modelling. PhD thesis, University of Nottingham.

Newton, Christopher (1999) The control and operation of the five level diode clamped inverter. PhD thesis, University of Nottingham.

Ng, Rong Wang (2023) A novel dynamic maximum demand reduction controller of battery energy storage system for educational buildings in Malaysia. PhD thesis, University of Nottingham.

Ngo, Anh Cat Le (2015) Digital system for bio-inspired visual attention processing fast and efficient information theoretic modelling of saliency. PhD thesis, University of Nottingham.

Nuzzo, Stefano (2018) On the damper cage of salient-pole synchronous generators. PhD thesis, University of Nottingham.

Ogilvie, Duncan (2018) Integrated design for assembly methodology for electrical machines with distributed wound coils. EngD thesis, University of Nottingham.

Oke, Oluwabukola A. (2013) Enhanced unscented transform method for probabilistic load flow studies. PhD thesis, University of Nottingham.

Okunola, Abdullah Akolade (2024) Internal energy control of a cascaded H-Bridge Energy Router. PhD thesis, University of Nottingham.

Oluwajobi, Festus Idowu (2020) Novel binary/multilevel Manchester based modulation technique for high-speed communication systems. PhD thesis, University of Nottingham.

Ong, Jia Jan (2016) Hardware realization of discrete wavelet transform cauchy Reed Solomon minimal instruction set computer architecture for wireless visual sensor networks. PhD thesis, University of Nottingham.

Orlowski, Rafal John (1976) Ultrasonic echo reinforcement for the blind. PhD thesis, University of Nottingham.

Othman, Md Nazri Bin (2012) Design and evaluation of high power density brushless DC permanent magnet machines. PhD thesis, University of Nottingham.

Palmer, Duncan. (2011) Position estimation using the Digital Audio Broadcast (DAB) signal. PhD thesis, University of Nottingham.

Panagiotou, Konstantina (2018) Design recommendations and sizing guidelines for small scale grid-connected decentralised energy systems. PhD thesis, University of Nottingham.

Papini, Luca (2018) Performance calculation of high speed solid rotor induction machine. PhD thesis, University of Nottingham.

Peake, Catherine (2022) Multi-Electron Charge Carriers for Next-Generation Flow Batteries. PhD thesis, University of Nottingham.

Pezeshki, Hamed (2021) Lab-on-a-chip technology platform for biophotonic applications. PhD thesis, University of Nottingham.

Photong, Chonlatee (2013) A current source inverter with series AC capacitors for transformerless grid-tied photovoltaic applications. PhD thesis, University of Nottingham.

Puah, Boon Keat (2024) Applications of Regression Enhanced Self-Organizing Incremental Neural Networks (RE-SOINN) in an embedded intelligent energy control system for off-grid systems. PhD thesis, University of Nottingham Malaysia.

Quadri, Syed Quadir Hussain (2020) On the analysis and modelling of the effects of high frequency harmonics on classical synchronous generators. PhD thesis, University of Nottingham.

Rajab, Maher I. (2003) Neural network edge detection and skin lesions image segmentation methods: analysis and evaluation. PhD thesis, University of Nottingham.

Ramalho, Mário António da Silva Neves (1996) Edge detection using neural network arbitration. PhD thesis, University of Nottingham.

Ramasamy, Arun Kumar (2022) Intelligent real-time prediction for energy and sensing applications. MPhil thesis, University of Nottingham.

Raqib, Abdurrahman (2022) Real time monitoring of capacitor degradation in industrial variable speed drives. PhD thesis, University of Nottingham.

Raute, Reiko (2009) Sensorless control of AC machines for low and zero speed operation without additional test signal injection. PhD thesis, University of Nottingham.

Rea, Molly (2023) Towards naturalistic scanning environments for wearable magnetoencephalography. PhD thesis, University of Nottingham.

Reyes-Moraga, Eduardo Felipe (2015) Predictive control of a direct series resonant converter with active output voltage compensation. PhD thesis, University of Nottingham.

Riccio, Jacopo (2023) Advance control of a synchronous reluctance motor drive. PhD thesis, University of Nottingham.

Rocca, Roberto (2020) Actual design space methodology for high-performance switched reluctance machines design. PhD thesis, University of Nottingham.

Roggia, Sara (2018) A two degrees of freedom permanent magnet conical motor. PhD thesis, University of Nottingham.

Rohouma, Wesam M.M. (2013) Design control and implementation of a four-leg matrix converter for ground power supply application. PhD thesis, University of Nottingham.

Romli, Muhammad Izuan Fahmi (2018) Solar energy management system with supercapacitors for rural application. PhD thesis, University of Nottingham.

Rose, Christopher James (2016) An adaptive D-STATCOM control scheme utilising impedance estimation. PhD thesis, University of Nottingham.

Rovere, Luca (2019) SVPWM zero-sequence voltage elimination for the dual fed common dc-link open-end winding PMSM high-speed starter-generator. PhD thesis, University of Nottingham.

Sabitu, Rabiu Imam (2020) Modelling of novel photonic devices based on micro-structure engineered for space division multiplexing optical communication system. PhD thesis, University of Nottingham.

Salis, Valerio (2019) Stability analysis of AC power system in the linear time periodic framework. PhD thesis, University of Nottingham.

Sattar, Rauf (2016) Exterior rotor permanent magnet generator in variable speed applications. MPhil thesis, University of Nottingham.

Sciascera, Claudio (2017) Design of short time duty permanent magnet electrical machines. PhD thesis, University of Nottingham.

Shahaj, Annabel (2010) Mitigation of vibration in large electrical machines. PhD thesis, University of Nottingham.

Shao, Yingjuan (2011) Development and evaluation of a biomass-fired micro-scale CHP with organic rankine cycle. PhD thesis, University of Nottingham.

Shaohong, Zhu (2021) Fractional slot concentrated winding PM synchronous motors for transport electrification applications. PhD thesis, University of Nottingham.

Shi, Bowen (2018) High performance permanent magnet electrical machine for electrical vehicle applications. PhD thesis, University of Nottingham.

Siew, Qi Yan (2020) One-step green hydrothermal synthesis of biocompatible graphene/titanium dioxide nanocomposites: towards the development of highly sensitive and selective electrochemical immunosensor for dengue diagnosis. PhD thesis, University of Nottingham.

Silbernagel, Cassidy (2019) Investigation of the design, manufacture and testing of additively manufactured coils for electric motor applications. PhD thesis, University of Nottingham.

Silva, César Armando (2003) Sensorless vector control of surface mounted permanent magnet machines without restriction of zero frequency. PhD thesis, University of Nottingham.

Soo, Qi Ping (2022) Radio propagation modelling in caves environment. PhD thesis, University of Nottingham.

Soorani, Mitra (2018) Needle-based ultrasonic diagnostic tool. MPhil thesis, University of Nottingham.

Sooriamoorthy, Denesh (2022) Development of a medical system to indicate risk of cardiovascular disease. PhD thesis, University of Nottingham.

Srithorn, Phinit (2009) Control of a statcom with supercapacitor energy storage. PhD thesis, University of Nottingham.

Stevenson, Anthony John (2017) Development of a novel electrochemical pyroprocessing methodology for spent nuclear fuels. PhD thesis, University of Nottingham.

Sumner, M. (1990) Vector controlled induction motor drive using transputer parallel processors. PhD thesis, University of Nottingham.

Sumsurooah, Sharmila (2017) Robust stability analysis of power electronic systems. PhD thesis, University of Nottingham.

Sünter, Sedat (1995) A vector controlled matrix converter induction motor drive. PhD thesis, University of Nottingham.

Tami, Abdelkader (1995) Modelling of rotor defects in squirrel cage induction motors using the time stepping numerical field analysis. PhD thesis, University of Nottingham.

Tan, Chye Cheah (2016) Medical image registration and soft tissue deformation for image guided surgery system. PhD thesis, University of Nottingham.

Tan, Taik Guan (2022) Using machine learning technique to classify geographic areas with socioeconomic potential for broadband investment in Malaysia. MPhil thesis, University of Nottingham.

Taqi, Ali A. M. A. (2022) Understanding the influence of microwave heating on biomass-solvent extraction. PhD thesis, University of Nottingham.

Thambippillai, Manoharan Aaruththiran (2024) Electric vehicle battery pack energy management design for virtual platform based scenario testing. PhD thesis, University of Nottingham Malaysia.

Thomas, David William Phillip (1990) Protection of major transmission lines using travelling-waves. PhD thesis, University of Nottingham.

Thomas-Hillman, Ieuan (2021) Large scale microwave synthesis of Metal-Organic Frameworks. PhD thesis, University of Nottingham.

Transi, Tommaso (2023) Design and optimization of electrical machines with high anisotropy for transport applications. PhD thesis, University of Nottingham.

Turl, Gary (2002) A synchronised multi-motor control system using hybrid sensorless induction motor drives. PhD thesis, University of Nottingham.

Twaha, Ssennoga (2018) Regulation of power generated from thermoelectric generators. PhD thesis, University of Nottingham.

Tweedy, Oliver (2021) Multi-physics modelling of a grid connected diesel engine driven synchronous generator set for the analysis of transient low voltage ride through performance. PhD thesis, University of Nottingham.

Ungku Amirulddin, Ungku Anisa (2006) Analysis and simulation of vector controlled bearingless induction motors. PhD thesis, University of Nottingham.

Ure, Alexander David (2017) Understanding the influence of mineralogy and microwave energy input on the microwave treatment of copper ores. PhD thesis, University of Nottingham.

Urrutia-Ortiz, Matias A. (2022) Control of the modular multilevel matrix converter based on continuous control set model predictive control. PhD thesis, University of Nottingham.

Valente, Giorgio (2018) Radial force control of bearingless multi-sector permanent magnet machines. PhD thesis, University of Nottingham.

Vodden, John Alan (2012) Modulation techniques for the cascaded H-bridge multi-level converter. PhD thesis, University of Nottingham.

Wakatsuchi, Hiroki (2011) Computational studies of the electromagnetic properties of metamaterials and applications. PhD thesis, University of Nottingham.

Wang, Bo (2023) Design and study on fault tolerant permanent magnet starter-generator for more electric aircraft application. PhD thesis, University of Nottingham.

Wang, Tianhao (2017) Self-sensing permanent magnet machine. PhD thesis, University of Nottingham.

Wang, Yinli (2021) Design of high speed wound field synchronous generators. PhD thesis, University of Nottingham.

Wang, Zhenyu (2019) Silicon carbide power devices in multi-port active bridge converter for shipboard micro-grid applications. PhD thesis, University of Nottingham.

Warren, Mark (2007) The development of a 3-Pass Persistent Scatterer algorithm using the Integer Ambiguity Search method. PhD thesis, University of Nottingham.

Webb, Philip Francis (1994) An ultrasonics based system for the extraction of range and bearing data for multiple targets. PhD thesis, University of Nottingham.

White, Roger D. (1992) Computer modelling techniques for industrial and marine cyclo-converter drives. PhD thesis, University of Nottingham.

Wong, Kin Nyap (2017) Synthesis of nano lead oxide for the application of lead-acid energy storage devices. MPhil thesis, University of Nottingham.

Wong, Voon-Kean (2018) Development of a dynamic model for piezoelectric raindrop energy harvesting. PhD thesis, University of Nottingham.

Wood, C. J. (2017) Improving the performance of photocathodes in tandem dye-sensitised solar cells. PhD thesis, University of Nottingham.

Xiong, Hao (2013) Antenna array geometries and algorithms for direction of arrival estimation. MRes thesis, University of Nottingham.

YAN, Zhuge (2020) Reduced complexity on video encoding for wireless multimedia sensor networks. PhD thesis, University of Nottingham.

YUAN, Qilong (2020) Fabrication and applications of graphene-diamond heterostructures. PhD thesis, University of Nottingham.

Yan, Jingjing (2020) Self-adaptive fire evacuation by using self-designed 3D indoor positioning system. PhD thesis, University of Nottingham.

Yang, Sen (2020) Cuff-less blood pressure estimation with photoplethysmogram and electrocardiogram signals. PhD thesis, University of Nottingham.

Yao, Li (2006) Magnetic field modelling of machine and multiple machine systems using dynamic reluctance mesh modelling. PhD thesis, University of Nottingham.

Zhang, Fengyu (2020) Experimental investigation and thermal modelling of slot cooling improvement for electrical machines. PhD thesis, University of Nottingham.

Zhang, Guangcheng (2018) Smart energy harvesting utilizing flow-induced techniques. PhD thesis, University of Nottingham.

Zhang, Lanyun (2018) Using mobile technology to facilitate the user experience of group holiday decision-making. PhD thesis, University of Nottingham.

Zhang, Yanan (2020) Investigation of open cycle thermochemical energy storage system in building application. PhD thesis, University of Nottingham.

Zheng, Sheng Qiang (2024) Solvothermal synthesis of nickel-based metal-organic framework (Ni-MOF) and its derivative for advanced symmetric supercapacitor applications. PhD thesis, University of Nottingham.

Zheng, Xiaofeng (2013) Exploration and development of domestic thermoelectric cogeneration system. PhD thesis, University of Nottingham.