Number of items at this level: **40**.

## A

Abdulahi, Abolore
(2014)
*Investigating the effect of liquid viscosity on two-phase gas-liquid flows.*
PhD thesis, University of Nottingham.

Adeniyi, Akinola A.
(2015)
*A coupled Lagrangian-Eulerian framework to model droplet to film interaction with heat transfer.*
PhD thesis, University of Nottingham.

Al-Aufi, Yousuf Abdullah
(2018)
*Vertical annular flow characteristics for air/silicone oil system.*
PhD thesis, University of Nottingham.

Al-Behadili, Mustapha Abbas Ethaib
(2017)
*On bubble rise dynamics in a continuum and pairwise interaction: an experimental and numerical study.*
PhD thesis, University of Nottingham.

Alamu, Mhunir Bayonle
(2010)
*Investigation of periodic structures in gas-liquid flow.*
PhD thesis, University of Nottingham.

Ambrose, Stephen
(2015)
*The rise of Taylor bubbles in vertical pipes.*
PhD thesis, University of Nottingham.

Ansari, Kamran
(2011)
*Boundary shear stress distribution and flow structures in trapezoidal channels.*
PhD thesis, University of Nottingham.

## B

Baker, Glen
(2003)
*Separation and control of gas-liquid flows at horizontal T-junctions.*
PhD thesis, University of Nottingham.

Baxter, Steven J.
(2010)
*Numerical simulation of three-dimensional free surface film flow over or around obstacles on an inclined plane.*
PhD thesis, University of Nottingham.

Bennett, Joe
(2018)
*Vibration of viscoelastic sessile droplets.*
MRes thesis, University of Nottingham.

Bertolotti, Luc
(2022)
*Machine learning-augmented turbulence models for the simulation of two-phase shear flows.*
PhD thesis, University of Nottingham.

Borghei, S.M.
(1982)
*Oscillatory boundary layer over fixed rough beds.*
PhD thesis, University of Nottingham.

Botterill, Neil
(2010)
*Fluid structure interaction modelling of cables used in civil engineering structures.*
PhD thesis, University of Nottingham.

Burnham-Slipper, Hugh
(2009)
*Breeding a better stove: the use of computational fluid dynamics and genetic algorithms to optimise a wood burning stove for Eritrea.*
PhD thesis, University of Nottingham.

## C

Conte, Giuseppe
(2000)
*An experimental study for the characterisation of gas/liquid flow splitting at T-junctions.*
PhD thesis, University of Nottingham.

Crossley, Amanda Jane
(1999)
*Accurate and efficient numerical solutions for the Saint Venant equations of open channel flow.*
PhD thesis, University of Nottingham.

## E

Easom, Gary
(2000)
*Improved turbulence models for computational wind engineering.*
PhD thesis, University of Nottingham.

Escrig, Josep
(2017)
*Influence of geometrical parameters on gas-liquid intermittent flows.*
PhD thesis, University of Nottingham.

## F

Fokeer, Smeeta
(2006)
*An investigation of geometrically induced swirl applied to lean phase pneumatic flows.*
PhD thesis, University of Nottingham.

## G

Gaviria Arcila, Dafne
(2020)
*Modelling droplet heat and mass transfer in aero-engine bearing chambers.*
PhD thesis, University of Nottingham.

George, Dickson Dungau
(2008)
*Effects of 4-lobe swirl-inducing pipe on pressure drop.*
MSc(Res) thesis, University of Nottingham.

## J

Jackson, Samuel J.
(2017)
*A numerical study on the viscous fingering instability of immiscible displacement in Hele-Shaw cells.*
PhD thesis, University of Nottingham.

Jukes, Timothy N.
(2007)
*Turbulent drag reduction using surface plasma.*
PhD thesis, University of Nottingham.

## K

Komonibo, Ebiundu
(2018)
*Liquid-liquid flow in baffled vessels and pipes.*
PhD thesis, University of Nottingham.

## L

Lok, Matthew Sze Tsun
(2018)
*Development of optimisation techniques for ultrasonic equipment for the generation of stable oil-in-water emulsion.*
MPhil thesis, University of Nottingham.

## M

McCorquodale, Mark W.
(2018)
*Interaction between oscillating-grid turbulence and a solid impermeable boundary.*
PhD thesis, University of Nottingham.

Momma, Takahiro
(1991)
*Cavitation loading and erosion produced by a cavitating jet.*
PhD thesis, University of Nottingham.

## N

Nicholson, Jonathon M. P.
(2020)
*The fluid and thermal dynamics of rimming flows with boundary slip.*
PhD thesis, University of Nottingham.

Nicoli, Andrew
(2020)
*Development and application of a fully coupled eulerian thin film/discrete phase approach to a simplified aeroengine bearing chamber.*
PhD thesis, University of Nottingham.

## O

Omar, Rajab Abulgasem
(2017)
*Transitional two-phase flow around 90° bends of different orientations.*
PhD thesis, University of Nottingham.

## P

Piazera de Carvalho, Thiago
(2016)
*Two-phase flow in open-cell metal foams with application to aero-engine separators.*
PhD thesis, University of Nottingham.

## S

Salim, Salim Mohamed
(2011)
*Computational study of wind flow and pollutant dispersion near tree canopies.*
PhD thesis, University of Nottingham.

Smith, N. D.
(2020)
*Boundary effects in a quasi-2d granular mono-layer.*
PhD thesis, University of Nottingham.

Sun, Qiangqiang
(2021)
*Micro- and nano-scale fluid flow and heat transfer with phase change in a channel.*
PhD thesis, University of Nottingham.

## V

Vasques, João
(2018)
*Investigation of interfacial gas-liquid flows using the brightness based laser induced fluorescence technique.*
PhD thesis, University of Nottingham.

## W

Warneford, Ian Paul
(1975)
*Natural convection from an inclined flat plate.*
PhD thesis, University of Nottingham.

Wren, Elisabeth Mary Katie
(2001)
*Geometric effects on phase split at a large diameter T-junction.*
PhD thesis, University of Nottingham.

## X

Xu, Peng
(2009)
*Turbulent flow control using spanwise travelling wave via Lorentz forcing.*
PhD thesis, University of Nottingham.

## Y

Yates, Matthew
(2018)
*The measurement of particle dispersions in turbulent, four-way coupled flows.*
PhD thesis, University of Nottingham.

Yusoff, Nazrul Hizam
(2012)
*Stratifying of liquid-liquid two phase flows through sudden expansion.*
PhD thesis, University of Nottingham.

This list was generated on **Sat Mar 25 19:38:07 2023 UTC**.