Number of items at this level: 40.
2022
Bertolotti, Luc
(2022)
Machine learning-augmented turbulence models for the simulation of two-phase shear flows.
PhD thesis, University of Nottingham.
2021
Sun, Qiangqiang
(2021)
Micro- and nano-scale fluid flow and heat transfer with phase change in a channel.
PhD thesis, University of Nottingham.
2020
Gaviria Arcila, Dafne
(2020)
Modelling droplet heat and mass transfer in aero-engine bearing chambers.
PhD thesis, University of Nottingham.
Nicholson, Jonathon M. P.
(2020)
The fluid and thermal dynamics of rimming flows with boundary slip.
PhD thesis, University of Nottingham.
Nicoli, Andrew
(2020)
Development and application of a fully coupled eulerian thin film/discrete phase approach to a simplified aeroengine bearing chamber.
PhD thesis, University of Nottingham.
Smith, N. D.
(2020)
Boundary effects in a quasi-2d granular mono-layer.
PhD thesis, University of Nottingham.
2018
Al-Aufi, Yousuf Abdullah
(2018)
Vertical annular flow characteristics for air/silicone oil system.
PhD thesis, University of Nottingham.
Bennett, Joe
(2018)
Vibration of viscoelastic sessile droplets.
MRes thesis, University of Nottingham.
Komonibo, Ebiundu
(2018)
Liquid-liquid flow in baffled vessels and pipes.
PhD thesis, University of Nottingham.
Lok, Matthew Sze Tsun
(2018)
Development of optimisation techniques for ultrasonic equipment for the generation of stable oil-in-water emulsion.
MPhil thesis, University of Nottingham.
McCorquodale, Mark W.
(2018)
Interaction between oscillating-grid turbulence and a solid impermeable boundary.
PhD thesis, University of Nottingham.
Vasques, João
(2018)
Investigation of interfacial gas-liquid flows using the brightness based laser induced fluorescence technique.
PhD thesis, University of Nottingham.
Yates, Matthew
(2018)
The measurement of particle dispersions in turbulent, four-way coupled flows.
PhD thesis, University of Nottingham.
2017
Al-Behadili, Mustapha Abbas Ethaib
(2017)
On bubble rise dynamics in a continuum and pairwise interaction: an experimental and numerical study.
PhD thesis, University of Nottingham.
Escrig, Josep
(2017)
Influence of geometrical parameters on gas-liquid intermittent flows.
PhD thesis, University of Nottingham.
Jackson, Samuel J.
(2017)
A numerical study on the viscous fingering instability of immiscible displacement in Hele-Shaw cells.
PhD thesis, University of Nottingham.
Omar, Rajab Abulgasem
(2017)
Transitional two-phase flow around 90° bends of different orientations.
PhD thesis, University of Nottingham.
2016
Piazera de Carvalho, Thiago
(2016)
Two-phase flow in open-cell metal foams with application to aero-engine separators.
PhD thesis, University of Nottingham.
2015
Adeniyi, Akinola A.
(2015)
A coupled Lagrangian-Eulerian framework to model droplet to film interaction with heat transfer.
PhD thesis, University of Nottingham.
Ambrose, Stephen
(2015)
The rise of Taylor bubbles in vertical pipes.
PhD thesis, University of Nottingham.
2014
Abdulahi, Abolore
(2014)
Investigating the effect of liquid viscosity on two-phase gas-liquid flows.
PhD thesis, University of Nottingham.
2012
Yusoff, Nazrul Hizam
(2012)
Stratifying of liquid-liquid two phase flows through sudden expansion.
PhD thesis, University of Nottingham.
2011
Ansari, Kamran
(2011)
Boundary shear stress distribution and flow structures in trapezoidal channels.
PhD thesis, University of Nottingham.
Salim, Salim Mohamed
(2011)
Computational study of wind flow and pollutant dispersion near tree canopies.
PhD thesis, University of Nottingham.
2010
Alamu, Mhunir Bayonle
(2010)
Investigation of periodic structures in gas-liquid flow.
PhD thesis, University of Nottingham.
Baxter, Steven J.
(2010)
Numerical simulation of three-dimensional free surface film flow over or around obstacles on an inclined plane.
PhD thesis, University of Nottingham.
Botterill, Neil
(2010)
Fluid structure interaction modelling of cables used in civil engineering structures.
PhD thesis, University of Nottingham.
2009
Burnham-Slipper, Hugh
(2009)
Breeding a better stove: the use of computational fluid dynamics and genetic algorithms to optimise a wood burning stove for Eritrea.
PhD thesis, University of Nottingham.
Xu, Peng
(2009)
Turbulent flow control using spanwise travelling wave via Lorentz forcing.
PhD thesis, University of Nottingham.
2008
George, Dickson Dungau
(2008)
Effects of 4-lobe swirl-inducing pipe on pressure drop.
MSc(Res) thesis, University of Nottingham.
2007
Jukes, Timothy N.
(2007)
Turbulent drag reduction using surface plasma.
PhD thesis, University of Nottingham.
2006
Fokeer, Smeeta
(2006)
An investigation of geometrically induced swirl applied to lean phase pneumatic flows.
PhD thesis, University of Nottingham.
2003
Baker, Glen
(2003)
Separation and control of gas-liquid flows at horizontal T-junctions.
PhD thesis, University of Nottingham.
2001
Wren, Elisabeth Mary Katie
(2001)
Geometric effects on phase split at a large diameter T-junction.
PhD thesis, University of Nottingham.
2000
Conte, Giuseppe
(2000)
An experimental study for the characterisation of gas/liquid flow splitting at T-junctions.
PhD thesis, University of Nottingham.
Easom, Gary
(2000)
Improved turbulence models for computational wind engineering.
PhD thesis, University of Nottingham.
1999
Crossley, Amanda Jane
(1999)
Accurate and efficient numerical solutions for the Saint Venant equations of open channel flow.
PhD thesis, University of Nottingham.
1991
Momma, Takahiro
(1991)
Cavitation loading and erosion produced by a cavitating jet.
PhD thesis, University of Nottingham.
1982
Borghei, S.M.
(1982)
Oscillatory boundary layer over fixed rough beds.
PhD thesis, University of Nottingham.
1975
Warneford, Ian Paul
(1975)
Natural convection from an inclined flat plate.
PhD thesis, University of Nottingham.
This list was generated on Tue May 30 01:31:50 2023 UTC.