• Login
• Admin

-

-, Salah-ud-din (2012) Behaviour of fibre reinforced cemented sand at high pressures. PhD thesis, University of Nottingham.

A

Abd Rahman, Norashidah (2012) Fatigue behaviour and reliability of Extended Hollobolt to concrete filled hollow section. PhD thesis, University of Nottingham.

AbdelRaouf, Ashraf M. (2012) Offline printed Arabic character recognition. PhD thesis, University of Nottingham.

Abed, Ahmed (2019) Mix design, mechanical analysis and performance modelling of warm mix asphalt. PhD thesis, University of Nottingham.

Abioye, Taiwo E. (2014) Laser deposition of Inconel 625/tungsten carbide composite coatings by powder and wire feedstock. PhD thesis, University of Nottingham.

Abuazoum, Latifa Abdalla (2011) Advanced model updating methods for generally damped second order systems. PhD thesis, University of Nottingham.

Acheampong, Edward (2020) Mathematical modelling of wastewater treatment processes for the removal of emerging pollutants. PhD thesis, University of Nottingham.

Acuña Ureta, David E. (2020) Theoretical foundations of uncertain event prognosis and predictive Bayesian Cramer-Rao bounds. PhD thesis, University of Nottingham.

Adam, Sarhat M. (2015) Digital images for road surface monitoring. PhD thesis, University of Nottingham.

Agyakwa, Pearl (2004) Creep and microstructural development in P91 weldments at elevated temperature. PhD thesis, University of Nottingham.

Aimakov, Nurkanat (2021) Elastic wave energy scattering and propagation in composite structures. PhD thesis, University of Nottingham.

Ajayi, Olorunfemi Michael (2019) Corrosion inhibition of mild steel in 15 wt% HCl solution by synthetic and green compounds. PhD thesis, University of Nottingham.

Al-Ani, Wisam (2020) Numerical analysis of ground improvement using column-like elements. PhD thesis, University of Nottingham.

Al-Thamir, Mohaimen Habeeb Makki (2021) Additive manufacturing of WC-Co cermets using composite powders. PhD thesis, University of Nottingham.

Alblalaihid, Khalid (2016) Active suspension structure for micro-scale probing systems. PhD thesis, University of Nottingham.

Alghamdi, Abdulaziz (2014) Mechanical characterisation of novel polyethylene-based nanocomposites. PhD thesis, University of Nottingham.

Algodi, Samer Jasim Mahmood (2018) Characterisation, modelling and tribological investigations of nano-structured TiC-based electrical discharge coatings. PhD thesis, University of Nottingham.

Alhuthali, Abdullah (2021) Human factors investigation of the behavioural response to cues of a fire emergency. PhD thesis, University of Nottingham.

Ali, Balhassn S. M. (2014) Development of non-destructive small specimen creep testing techniques. PhD thesis, University of Nottingham.

Alma'aitah, Mohammad (2024) Development of multi-scale, sustainable and cost-effective TRC composites for structural repair and applications. PhD thesis, University of Nottingham.

Almeida, Trevor P. (2010) Hydrothermal synthesis and characterisation of α-Fe2O3 nanorods. PhD thesis, University of Nottingham.

Alruqi, Mansoor (2021) Investigating innovative technique for managing Failure Modes and Effects Analysis. PhD thesis, University of Nottingham.

Alsadi, Majid Hamid Nassar (2012) Modelling of electromagnetic material properties at microwave frequencies. PhD thesis, University of Nottingham.

Ampatzidis, Theofanis (2019) Acoustics and optimisation of vibration attenuation of composite structures through banded behaviour. PhD thesis, University of Nottingham.

Amuzuvi, Christian Kwaku (2010) Characterisation, emulation and by-emitter degradation analysis of high power semiconductor laser diodes. PhD thesis, University of Nottingham.

Apalowo, Rilwan Kayode (2019) Wave propagation and interaction with damage in periodic composite structures. PhD thesis, University of Nottingham.

Arshad, Adeel (2021) Assessment of nanomaterials in enhancing the thermophysical properties of phase change materials for thermal management. PhD thesis, University of Nottingham.

Astachov, Vladimir (2018) Tailoring the structure of nanomaterials formed by light-induced synthesis. PhD thesis, University of Nottingham.

Azari, Majid (2024) Spatio-temporal modelling of land use/land cover and climate change effects on surface runoff and river discharge in the Klang River basin. PhD thesis, University of Nottingham.

B

Bafarawa, Buhari Attahiru (2015) Structural characterisation of porous materials in relation to entrapment of non-wetting fluids. PhD thesis, University of Nottingham.

Bailey, D.A. (2005) The effect of damage on the energy absorption potential of composite structures. PhD thesis, University of Nottingham.

Bannister, David A. (1990) A pulsed NMR relaxation and diffusion study of water in treated and untreated waterlogged wood. PhD thesis, University of Nottingham.

Behnam Manesh, Ali (2016) A study on the application of location-based management and automated progress monitoring for linear infrastructure projects. MPhil thesis, University of Nottingham.

Ben Hamdin, Hanya Abdusalam Mohamed (2012) Boundary element and transfer operator methods for multi-component wave systems. PhD thesis, University of Nottingham.

Bin Shamsudin, Mohd Fazaulnizam (2020) Group behaviour of Extended HolloBolts (EHBs) in tension. PhD thesis, University of Nottingham.

Blagdon, Mark (1998) Characterisation of fabric deformation mechanisms during preform manufacture. PhD thesis, University of Nottingham.

Blake, Stephen James (2008) Heave compensation using time-differenced carrier observations from low cost GPS receivers. PhD thesis, University of Nottingham.

Blankson, Marva Angela (2013) Corrosion inhibition in self-compacting concrete. PhD thesis, University of Nottingham.

Bond, Michael David (2013) Multi-scale modelling of discontinuous carbon fibre reinforced composites. PhD thesis, University of Nottingham.

Bottome, Kristofer John (2006) The energy absorption of damaged braided and non-crimp fibre composite material structures. PhD thesis, University of Nottingham.

Boyce, John Rodney (1976) The behaviour of a granular material under repeated loading. PhD thesis, University of Nottingham.

Bridle, Michael D.J. (1973) Vibrations of thick plates and shells. PhD thesis, University of Nottingham.

Broadbent, T.P. (1988) The stress analysis of thin-walled screwed tubular joints. PhD thesis, University of Nottingham.

Brown, Helen C. (2016) Extractables and leachables from poly-ε-caprolactone/phosphate based glass composites. MPhil thesis, University of Nottingham.

Brown, Kevin Anthony (2007) Finite element modelling of the static and dynamic impact behaviour of thermoplastic composite sandwich structures. PhD thesis, University of Nottingham.

Bulat, Adrian (2019) Deep learning for real world face alignment. PhD thesis, University of Nottingham.

Burling, Luke Donald (2006) Novel phosphate glasses for bone regeneration applications. PhD thesis, University of Nottingham.

Burn, David T. (2016) Long discontinuous carbon fibre/polypropylene composites for high volume automotive applications. PhD thesis, University of Nottingham.

C

Cabrera Duran, Manuela (2023) Analysis of the Extended Hollo-Bolt component in concrete-filled steel connections. PhD thesis, University of Nottingham.

Cacciapuoti, Bianca (2018) The role of miniature specimen creep tests in power plant life management. PhD thesis, University of Nottingham.

Cadot, Guillaume Bastien Jérémy (2017) Experimental and numerical investigations of diamond and related materials controlled-depth machining using pulsed laser ablation. PhD thesis, University of Nottingham.

Calvo Carrascal, Miguel Angel (2018) Sustainable manufacturing of next generation building materials using microwave energy. PhD thesis, University of Nottingham.

Caramazana Gonzalez, Pablo (2017) The sustainable engineering of continuous hydrothermal synthesis. PhD thesis, University of Nottingham.

Carpenter, James (2014) Low bandwidth laser doppler blood flowmetry. PhD thesis, University of Nottingham.

Carrington, Matthew John (2021) Microstructure formation in the Fe-based hardfacing alloy 5183 and its sliding wear behaviour in high temperature water. PhD thesis, University of Nottingham.

Carvajal-Munoz, Juan Sebastian (2022) Multi-scale assessment of the performance-related effects of hydrated lime replacement on SMA mixtures. PhD thesis, University of Nottingham.

Catchpole-Smith, Sam (2020) Laser powder bed fusion of lattice structures for thermomechanical applications. PhD thesis, University of Nottingham.

Chacko Salem, Stanley (2016) Methodologies for evaluation of high strain rate properties of composite material constituents. PhD thesis, University of Nottingham.

Chai, Koh Siong (2016) 3-D finite element investigation of discrete deadman anchor for earth retaining wall. PhD thesis, University of Nottingham.

Chalk, Kieran (2013) Weld consumables and PWHT for P92 power plant steel. PhD thesis, University of Nottingham.

Chandenduang, Chatrchai (2000) Boundary element analysis of time-dependent material non-linearity. PhD thesis, University of Nottingham.

Chen, Han-Mei (2014) Physical model tests and numerical simulation for assessing the stability of tunnels. PhD thesis, University of Nottingham.

Chen, Rui (2013) Novel particle sizing techniques. PhD thesis, University of Nottingham.

Chen, Shuai (2016) Fabric forming simulation and process optimisation for composites. PhD thesis, University of Nottingham.

Chin, Mei Yun (2014) Shear resistance of oil palm shell concrete beams with and without shear reinforcement. PhD thesis, University of Nottingham.

Chokethawai, Komsanti (2010) Microstructural evolution in Fe-Cr-B based alloy powder and thermally sprayed coatings and their wear performance. PhD thesis, University of Nottingham.

Choong, Gabriel Y. H. (2014) A study of melt-compounded nanocomposites of polycarbonate and carbon nanotubes in the melt and solid states. PhD thesis, University of Nottingham.

Chouvion, Benjamin (2010) Vibration transmission and support loss in MEMS sensors. PhD thesis, University of Nottingham.

Clark, Ian (2018) Continuous synthesis and characterisation of layered double hydroxide nanomaterials for their application for dye wastewater remediation. PhD thesis, University of Nottingham.

Clarke, Eddie (1995) A novel approach to handwritten character recognition. PhD thesis, University of Nottingham.

Claverley, James David (2014) Development and validation of a 3D vibrating contact probe for micro-CMMs. PhD thesis, University of Nottingham.

Cormier, Luis (2023) Analysis of the Earth-Moon Lagrange points for improving GNSS performance in lunar space. MRes thesis, University of Nottingham.

Correia, Nuno André Curado Mateus (2004) Analysis of the vacuum infusion moulding process. PhD thesis, University of Nottingham.

Cortellino, Francesco (2015) Experimental and numerical investigation of small punch creep test. PhD thesis, University of Nottingham.

Coulson, Jethro (2016) Spatially resolved acoustic spectroscopy (SRAS) technology development. EngD thesis, University of Nottingham.

Crockett, Peter (1994) Finite element analysis of welded tubular connections. PhD thesis, University of Nottingham.

Crookston, Jonathan Josiah (2004) Prediction of elastic behaviour and initial failure of textile composites. PhD thesis, University of Nottingham.

Crosby, Jack (2023) A review of biopolymer-based wood consolidants for archaeological wood preservation. MRes thesis, University of Nottingham.

Curl, S.J. (1977) The effects of refraction on engineering survey measurements. PhD thesis, University of Nottingham.

Cyril, Perpetua Aaniya (2020) Development of smooth particle hydrodynamics for the modelling of stresses around jack-in pile. PhD thesis, University of Nottingham.

D

Daley, Patrick James (2019) An optimised advanced ash fusion test for power generators. EngD thesis, University of Nottingham.

Davies, Michael I. (2013) High temperature nanoindentation characterisation of P91 and P92 steel. PhD thesis, University of Nottingham.

Deng, Wenjuan (2014) A high-performance hardware architecture of an image matching system based on the optimised SIFT algorithm. PhD thesis, University of Nottingham.

Derelizade, Kerem (2023) Thermal spraying of novel composite coating compositions for wear resistance applications. PhD thesis, University of Nottingham.

Ding, Siwen (2017) Investigation on thermal barrier coating and thermal behaviour at high temperature. PhD thesis, University of Nottingham.

Dyson, Charles N.C. (2019) Interpretation of small specimen creep test and recommendations on standardisation of impression creep test method. EngD thesis, University of Nottingham.

de Bono, John Patrick (2013) Discrete element modeling of cemented sand and particle crushing at high pressures. PhD thesis, University of Nottingham.

E

Eastwood, Joe (2023) Machine learning for the automation and optimisation of optical coordinate measurement. PhD thesis, University of Nottingham.

Edwards, Gordon (1974) Cylindrical shell hybrid finite elements. PhD thesis, University of Nottingham.

Egede, Joy Onyekachukwu (2019) Automatic pain assessment from face video (continuous pain intensity estimation in adults and newborns). PhD thesis, University of Nottingham.

El-Sahli, Zouheir (2013) Estimating the effects of containerisation on world trade. PhD thesis, University of Nottingham.

Elamin, Ahmed Mohamed Elamin Ahmed (2014) The face bending behaviour of blind-bolted connections to concrete-filled hollow sections. PhD thesis, University of Nottingham.

Ellwood, Robert (2012) The effect of microstructure and fatigue on the acoustoelastic response of aerospace materials. PhD thesis, University of Nottingham.

Elmadih, Waiel (2020) Additively manufactured lattice structures for vibration attenuation. PhD thesis, University of Nottingham.

Elnasri, Mahmoud Masoud Hamza (2015) From binder to mixture: experimental programme on permanent deformation behaviour. PhD thesis, University of Nottingham.

Erdem, Savas (2012) Impact load-induced microstructural damage of concrete made with unconventional aggregates. PhD thesis, University of Nottingham.

Escobar-Galindo, C. Manuel (2023) Ergonomics in laparoscopic surgery: a work system analysis to reduce work-related musculoskeletal disorders across surgeons in Peruvian hospitals. PhD thesis, University of Nottingham.

Essawy, Shams Khaled Elhosseny Ghazy (2024) Achieving interoperability in mobility as a service: a data ecosystem leveraging Semantic Web Technologies. PhD thesis, University of Nottingham.

Evans, Anthony David (2018) Hybrid carbon fibre architectures for high performance, high volume applications. PhD thesis, University of Nottingham.

F

Falaye, Adewale (2023) Data mining and spatial analysis of Twitter as a resource for assessing UK water pollution. MRes thesis, University of Nottingham.

Fenwick, Neal (1996) Recycling of composite materials using fluidised bed processes. PhD thesis, University of Nottingham.

Fernandes Arruebarrena, Vanessa Auxiliadora (2016) Manifestations of the Mullins effect in filled elastomers. PhD thesis, University of Nottingham.

Fu, Hao (2012) Semantic image understanding: from pixel to word. PhD thesis, University of Nottingham.

Fuentes Dominguez, Rafael (2018) Metal nanoparticles as nano-sized opto-acoustic transducers. PhD thesis, University of Nottingham.

G

Gao, Shan (2016) Gas adsorption and selectivity studies for porous metal-organic frameworks. PhD thesis, University of Nottingham.

Garcia-Gil, Rafael (2003) Forming and consolidation of textile composites. PhD thesis, University of Nottingham.

Gaskell, J (2016) High-frequency oscillations in graphene resonant tunnelling heterostructures. PhD thesis, University of Nottingham.

Gaskin, Joshua (2013) On bitumen microstructure and the effects of crack healing. PhD thesis, University of Nottingham.

Gatea, Shakir Madhloom (2017) Experimental and numerical investigation of formability and ductile fracture in incremental sheet forming. PhD thesis, University of Nottingham.

Gavalda Diaz, Oriol (2018) On understanding the material removal mechanism when cutting Ceramic Matrix Composites (CMCs). PhD thesis, University of Nottingham.

Gayton, George (2023) Determining uncertainty in the functional quantities of fringe projection. PhD thesis, University of Nottingham.

Geng, Jianghui (2011) Rapid integer ambiguity resolution in GPS precise point positioning. PhD thesis, University of Nottingham.

Geng, Yan (2010) Discrete element modelling of cavity expansion in granular materials. PhD thesis, University of Nottingham.

Gherman, A.L. (2018) Investigation into the effect of materials microstructure and properties on micro-cutting precision. PhD thesis, University of Nottingham.

Giannoukos, Konstantinos (2016) Micro-structural analysis of time-variant evolution in pore geometry of cement materials during carbonation. PhD thesis, University of Nottingham.

Gilani, Negar (2023) Drop-on-demand metal additive manufacturing from droplet formation to 3D structures. PhD thesis, University of Nottingham.

Gilbert, David Jonathan (2017) Laser process optimisation for in-situ repair of aero-engine components. EngD thesis, University of Nottingham.

Gommer, Frank (2013) Stochastic modelling of textile structures for resin flow analysis. PhD thesis, University of Nottingham.

Gong, Wei (2019) Multiphase and multicomponent flows simulation using mesoscale method. PhD thesis, University of Nottingham.

Goodwin, Sophie, R (2021) Synthesis and application of novel hyperbranched polymers. EngD thesis, University of Nottingham.

Gun, Halit (1997) Boundary element formulations for elastoplastic stress analysis problems. PhD thesis, University of Nottingham.

Guo, Yanqing (2021) Multiphase flow dynamics and mass transfer in different multiphase reactor for shear controllable synthesis process. PhD thesis, University of Nottingham.

Gupta, Alok (2023) Exploring property-structure-performance relationship for additive manufactured Ti-6Al-4V alloy through experimental studies. PhD thesis, University of Nottingham.

H

Haji, Twana Kamal (2017) Evaluating the effects of tunnel construction on buildings. PhD thesis, University of Nottingham.

Hama, Mohammed Fadhil (2024) Assessing the viability of Tenera oil palm shells as fine and coarse aggregates in structural lightweight concrete: microstructure and mechanical properties. PhD thesis, University of Nottingham.

Hamruni, Ahmed Mohamed (2010) The use of oblique and vertical images for 3D urban modelling. PhD thesis, University of Nottingham.

Hao, Siqi (2021) Recycling of carbon fibre via pyrolysis technologies. PhD thesis, University of Nottingham.

Hardcastle, Alex (2021) Fully coupled elasto-plastic computational framework for fluid pressurised crack evolution in porous media. PhD thesis, University of Nottingham.

Hardy, S.J. (1983) Finite element analysis of components subjected to ratchetting and creep. PhD thesis, University of Nottingham.

Harper, Lee Thomas (2006) Discontinuous carbon fibre composites for automotive applications. PhD thesis, University of Nottingham.

Hartono, Dennis (2018) Development of time-frequency analysis for extraction of dynamic characteristics for rotating machinery and bridge structures. PhD thesis, University of Nottingham.

Hasan, Muhammad Sami (2012) Phosphate glass fibre reinforced composite for bone repair applications: investigation of interfacial integrity improvements via chemical treatments. PhD thesis, University of Nottingham.

Hasan, Sarakot (2011) Behaviour of discontinuous precast concrete beam-column connections. PhD thesis, University of Nottingham.

Hasell, Tom (2008) Synthesis of metal-polymer nanocomposites. PhD thesis, University of Nottingham.

Hashmi, Anas (2017) Differential ultrasonic calorimeter for accurate measurement of thermal losses in machinery. PhD thesis, University of Nottingham.

Heil, Joseph Paul (2016) Analysis of composites recycling and thermal oxidative treatments on carbon fibre. PhD thesis, University of Nottingham.

Helmi, Masdar (2016) Thermo-physical properties and high-temperature durability of reactive powder concrete (RPC). PhD thesis, University of Nottingham.

Hermosilla, Unai (2008) Mechanical modeling of thermal barrier coatings at high temperatures. PhD thesis, University of Nottingham.

Hernandez, J. A. (2007) Statistics of aberrations in polycrystalline materials. PhD thesis, University of Nottingham.

Heyken Soares, Philipp (2020) Three steps towards practical application of public transport route optimisation in urban areas. PhD thesis, University of Nottingham.

Hignett, Sue (2001) Using qualitative methodology in ergonomics: theoretical background and practical examples. PhD thesis, University of Nottingham.

Hilal, Ameer Abdulrahman (2015) Properties and microstructure of pre-formed foamed concretes. PhD thesis, University of Nottingham.

Hill-Casey, Fraser (2018) Hyperpolarised noble gas nuclear magnetic resonance and magnetic resonance imaging studies of complex porous media. PhD thesis, University of Nottingham.

Himsworth, John M. (2011) Linear array CMOS detectors for laser doppler blood flow imaging. PhD thesis, University of Nottingham.

Hoey, Thomas Michael (2017) Evaluation of high temperature performance of the Co-Cr-C coated P92 steel. EngD thesis, University of Nottingham.

Holmes, Paul (2018) Towards a person-centric interface for information re-finding and sharing tasks. PhD thesis, University of Nottingham.

Hosking, Niamh C. (2008) Next generation corrosion protection for the automotive industry. PhD thesis, University of Nottingham.

Hossain, Kazi Md Zakir (2014) Extension of the use of cellulose nanowhiskers in composite materials. PhD thesis, University of Nottingham.

Hou, Xianxu (2018) An investigation of deep learning for image processing applications. PhD thesis, University of Nottingham.

Hu, Chenxi (2021) Decoration of graphene-carbon nanotube nanostructures: synthesis and applications. PhD thesis, University of Nottingham.

Huang, Xiani (2019) Investigation on synthesis and process control of microporous particle material. PhD thesis, University of Nottingham.

Hui, Dominic (2019) An investigation into laser sintering of nano-hydroxyapatite coated powders for bone tissue applications. PhD thesis, University of Nottingham.

Hyde, T.H. (1976) Experimental reference stress techniques for the prediction of creep deformation using lead alloy models. PhD thesis, University of Nottingham.

I

Iwama, Masahiko (2009) Influence of specimen size and orientation on the mechanical properties of laboratory compacted asphalt specimens. MPhil thesis, University of Nottingham.

J

Jackson, George Anthony (2018) Influence of microstructure on the mechanical properties of thermally sprayed NiCoCrAlY coatings determined by small punch testing. PhD thesis, University of Nottingham.

Jin, Xiaozhe (2017) Investigation of the interrelated effects of temperature and frequency on fretting wear. PhD thesis, University of Nottingham.

Jones, Ivor Arthur (1993) Finite element modelling and testing of filament-wound orthotropic components. PhD thesis, University of Nottingham.

Jones, Mark (2002) Properties of HVOF sprayed TiC and TiB2-based cermet coatings. PhD thesis, University of Nottingham.

K

Kabir, Sumaya Farhana (2017) Preparation and characterisation of hyperbranched poly divinyl benzene and star branched poly lactic acid blends and their composites. PhD thesis, University of Nottingham.

Kadhim, Manahil (2019) Visualisation of nanoslurries and hybrid nanomaterials. PhD thesis, University of Nottingham.

Kakarla, Akesh Babu (2018) Preparation, characterisation and applications : Boron nitride nanotubes (BNNTs), BNNTs-graphene hybrid and their polymer nanocomposites. MPhil thesis, University of Nottingham.

Kakouris, Emmanouil G. (2019) Linear elastic fracture mechanics via the Material Point Method: a phase field approach. PhD thesis, University of Nottingham.

Kang, JiJun (2013) Determination of elastic-plastic and visco-plastic material properties from instrumented indentation curves. PhD thesis, University of Nottingham.

Kaprielian, P.V. (1985) The effect of holes and free edges on the stress in laminated plates. PhD thesis, University of Nottingham.

Kara kuni, Sharsad (2018) Mathematical modelling and experimental investigation of multi-stage valve-less impedance pumping system. PhD thesis, University of Nottingham.

Karanatsis, Dimitrios (2020) Development of novel fibre reinforcement architectures. EngD thesis, University of Nottingham.

Kendall, Peter (2018) Mechanical characterisation of adhesive bonds in MEMS inertial sensors. PhD thesis, University of Nottingham.

Kennerley, Jonathan (1998) Recycling fibres recovered from composite materials using a fluidised bed process. PhD thesis, University of Nottingham.

Khan, Muhammad Waleed (2017) Dynamic filtration at soil-geotextile interfaces. PhD thesis, University of Nottingham.

Khan, Rawid (2010) Quantification of microstructural damage in asphalt. PhD thesis, University of Nottingham.

Kilsby, Paul (2017) Modelling railway overhead line equipment asset management. PhD thesis, University of Nottingham.

Kirk, Adam (2021) The role of debris in fretting: investigation into the interrelated effects of displacement amplitude and frequency in fretting wear. PhD thesis, University of Nottingham.

Kolluru, Kiran V.S.S. (2015) On design and simulation of passive damping solutions for milling of thin-walled parts. PhD thesis, University of Nottingham.

Kong, Chang Jing (2004) Microstructural evolution in AISn-based gas atomised powder and thermally sprayed coatings. PhD thesis, University of Nottingham.

Kong, Weiyi (2016) Macro-scale modelling of the impact response of 3D woven composites for aerospace applications. PhD thesis, University of Nottingham.

Koutsonas, Spiridon (2015) Race-track modelling and variability in RTM for advanced composites structures. PhD thesis, University of Nottingham.

Kuna, Kranthi (2015) Mix design considerations and performance characteristics of foamed bitumen mixtures (FBMs). PhD thesis, University of Nottingham.

Kuno, Masato (1988) Fretting damage of high carbon chromium bearing steel. PhD thesis, University of Nottingham.

Kyaw, Si Thu (2013) Finite element modelling of stresses and failure within plasma spray thermal barrier coating systems. PhD thesis, University of Nottingham.

L

Lam, Dennis (1998) Composite steel beams using precast concrete hollow core floor slabs. PhD thesis, University of Nottingham.

Land, Patrick (2018) Defect profiling of hot roll formed carbon-epoxy composite laminates during production. EngD thesis, University of Nottingham.

Lee, Robert (2021) Modelling methodologies for railway asset management. PhD thesis, University of Nottingham.

Lee, Yaw Chuan (2009) Characterisation of the torsional behaviour of titanium metal matrix composite shafts. PhD thesis, University of Nottingham.

Lee, York Wei (2006) Discrete element modelling of idealised asphalt mixture. PhD thesis, University of Nottingham.

Li, Dafei (2021) Modelling damage due to low speed impact in laminated composites of toughened interfaces through 'ex-situ' technique. PhD thesis, University of Nottingham.

Li, Junfu (2018) Correlation of electron delocalisation with pseudocapacitance in nanostructured carbon. PhD thesis, University of Nottingham.

Li, Qingquan (2013) Microstructured optical fibres in chalcogenide glass. MPhil thesis, University of Nottingham.

Li, Wenqi (2012) Laser ultrasonic method for determination of crystallographic orientation of large grain metals by spatially resolved acoustic spectroscopy (SRAS). PhD thesis, University of Nottingham.

Li, Xuan (2021) Assessment of delamination in laminated composite structures based on the phase space topology of structural dynamic responses. PhD thesis, University of Nottingham.

Li, Yao (2016) Shear behaviour of sand in Bi-directional direct simple shear tests. PhD thesis, University of Nottingham.

Li, Yuexiang (2016) An investigation of automatic processing techniques for time-lapse microscope images. PhD thesis, University of Nottingham.

Lian, Zheng Gang (2011) Fabrication of rib waveguides and optical fibres in chalcogenide glasses. PhD thesis, University of Nottingham.

Lidgett, Mark Jonathan (2012) Multi-scale modelling of polymer composite materials at high rates of strain. PhD thesis, University of Nottingham.

Liew, Soon Yee (2012) Cellulose nanocrystal: electronically conducting polymer nanocomposites for supercapacitors. PhD thesis, University of Nottingham.

Lim, Wei Xiang (2024) Diabetic retinopathy image classification with quantitative saliency-oriented visual explanation and SLIC-G image preprocessing methods. PhD thesis, University of Nottingham Malaysia.

Lindop, Martyn (2015) A study of open-cell nickel-chrome metallic foam for an abradable compressor sealing. MPhil thesis, University of Nottingham.

Liu, Bo-zhi (2018) Understanding colour image: colour constancy. PhD thesis, University of Nottingham.

Liu, Hao (2014) Modified thermal reduction of graphene oxide. PhD thesis, University of Nottingham.

Liu, Shulong (2001) Stress analysis of composite laminates. PhD thesis, University of Nottingham.

Liu, Zhe (2017) Characterization of discontinuous carbon fibre mat produced by hydrodynamic processes. PhD thesis, University of Nottingham.

Lloyd, Michael D. (2014) A phased mission approach to fault propagation. PhD thesis, University of Nottingham.

Lourenço, Nuno F.S. (2002) Predictive Finite Element Method for axial crush of composite tubes. PhD thesis, University of Nottingham.

Lowe, Amy (2018) Early detection of stress in strawberry plants using hyperspectral image analysis. PhD thesis, University of Nottingham.

Lu, Nan (2019) Elastoplastic constitutive modelling of clay behaviour under principal stress rotation. PhD thesis, University of Nottingham.

Lu, Shimin (2024) Deposition behaviour of carbon fibres processed by automated dry fibre placement (ADFP). PhD thesis, University of Nottingham.

Luengo, Imanol (2018) Hierarchical super-regions and their applications to biological volume segmentation. PhD thesis, University of Nottingham.

M

Mackilligin, Harry (2017) The investigation, creation and formulation of novel thermochromic coatings. PhD thesis, University of Nottingham.

Madge, Jason John (2009) Numerical modelling of the effect of fretting wear on fretting fatigue. PhD thesis, University of Nottingham.

Mahmud, Maythem Naji (2011) Utilisation of high carbon pulverised fuel ash. PhD thesis, University of Nottingham.

Makashev, Kuanysh (2022) Textile reinforced mortar to masonry bond under static and fatigue loading. PhD thesis, University of Nottingham.

Maligno, Angelo Rosario (2008) Finite element investigations on the microstructure of composite materials. PhD thesis, University of Nottingham.

Mandal, Satya Narayan (1978) The collapse behaviour of tapered steel beams. PhD thesis, University of Nottingham.

Marmash, Basem Ezzat (2011) The properties of recycled precast concrete hollow core slabs for use as replacement aggregate in concrete. PhD thesis, University of Nottingham.

Marri, Amanullah (2010) The mechanical behaviour of cemented granular materials at high pressures. PhD thesis, University of Nottingham.

Marshall, Eleanor (2005) Experimental evaluation of interaction design in virtual reality. PhD thesis, University of Nottingham.

Martin-Clave, Carla (2021) Impact of second phase content over rheological behaviour of rock salt under cyclic loading conditions applied to Underground Gas Storage. EngD thesis, University of Nottingham.

Masika, Eric (2013) Fabrication of nanostructured inorganic and carbon porous materials for catalysis and gas storage applications. PhD thesis, University of Nottingham.

Matveev, Mikhail Y. (2015) Effect of variabilities on mechanical properties of textile composites. PhD thesis, University of Nottingham.

Md. Yusoff, Nur Izzi (2012) Modelling the linear viscoelastic rheological properties of bituminous binders. PhD thesis, University of Nottingham.

Medrano Téllez, Alexis G. (2010) Fibre laser metal deposition with wire: parameters study and temperature control. PhD thesis, University of Nottingham.

Meng, Fanran (2017) Environmental and cost analysis of carbon fibre composites recycling. PhD thesis, University of Nottingham.

Meng, Xuesong (2014) Modelling multi-scale problems in the transmission line modelling method. PhD thesis, University of Nottingham.

Michot Roberto, Sonia Elisa (2022) 3D-simulation of packing of aggregates with realistic morphology and size distribution, by using a real-time physics’ engine. PhD thesis, University of Nottingham.

Mienczakowski, Martin (2010) Advanced ultrasonic NDE of composite airframe components: physics, modelling and technology. PhD thesis, University of Nottingham.

Milborne, Ben (2023) Phosphate-based glass microspheres for bone repair and localised chemotherapy and radiotherapy treatment of bone cancers. PhD thesis, University of Nottingham.

Misman, Ahmad Fatzilah (2014) The automatic re-annotation of web images for improving access for blind users. PhD thesis, University of Nottingham.

Modi, Dhiren (2008) Modelling and active control of the Vacuum Infusion Process for composites manufacture. PhD thesis, University of Nottingham.

Mohamad Yusoff, Mohd Shahrul Azmi (2017) Finite element analysis of propagating waves in non-destructive testing for defects characterisation in pipes. MPhil thesis, University of Nottingham.

Mohammad, Laheji (2021) Microfluidic nanoparticle synthesis via continuous-wave laser heating. PhD thesis, University of Nottingham.

Mohammed, Mahmoud khashaa (2015) Multi-scale response of sustainable self-compacting concrete (SCC) to carbonation and chloride penetration. PhD thesis, University of Nottingham.

Molinar Diaz, Jesus (2023) Novel magnetic micro-structured porous materials for biomedical applications. PhD thesis, University of Nottingham.

Monico, João Francisco Galera (1995) High precision inter-continental GPS network. PhD thesis, University of Nottingham.

Montillet, Jean-Philippe (2008) Precise positioning in urban canyons : applied to the localisation of buried assets. PhD thesis, University of Nottingham.

Mukupa, Wallace (2017) Change detection and deformation monitoring of concrete structures using terrestrial laser scanning. PhD thesis, University of Nottingham.

Murray, Bryan Gerrard (1994) Low frequency impedance and structural properties of high temperature superconducting YBa2Cu3Ox thin films. PhD thesis, University of Nottingham.

Murray, James W.H. (2014) Damage, contamination and surface treatment of electrical discharge machined materials. PhD thesis, University of Nottingham.

Murtala Farouq, Mahmoud (2023) Development and Evaluation of Phase Change Material-Enhanced Earthbag Buildings for Thermally Comfortable and Sustainable Temporary Housing in Nigeria: Numerical and Experimental Approach. PhD thesis, University of Nottingham.

N

Nag, Ranajit Kumar (2015) Influence of fibre surface treatments and textile process on the properties of natural composites. PhD thesis, University of Nottingham.

Nahvi, Saied Mehran (2011) Abrasive wear behaviour of steels and advanced HVOF-sprayed WC-M coatings. PhD thesis, University of Nottingham.

Naybour, Matthew (2020) Applying reliability engineering techniques to the process of community pharmacy dispensing. PhD thesis, University of Nottingham.

Ng, Mei Xiang (2019) High-temperature intermittent drying: quality characterization of crumb rubber. PhD thesis, University of Nottingham.

Ng, Wei Jiang (2020) First principle modelling of the fundamental electronics properties of single layer and bilayer graphene nanoflakes materials. PhD thesis, University of Nottingham.

Nguyen, Hieu (2011) Linear subspace methods in face recognition. PhD thesis, University of Nottingham.

Nguyen, Tuan (2015) Adaptive visual tracking via multiple appearance models and multiple linear searches. PhD thesis, University of Nottingham.

Nguyen, Viet Hung (2009) Effects of laboratory mixing methods and RAP materials on performance of hot recycled asphalt mixtures. PhD thesis, University of Nottingham.

Niaz, Akbar (2013) Complementary use of electrochemical testing techniques to study corrosion processes of HVOF Inconel 625, CoNiCrAIY and WCCoCr coatings. PhD thesis, University of Nottingham.

Nicholls, Tristan Kit (2013) Adhesive bonding of discontinuous carbon fibre composites: an experimental investigation. PhD thesis, University of Nottingham.

Ntourmas, Georgios (2023) Detailed sizing optimisation of industrial-scale composite aeronautical structures. PhD thesis, University of Nottingham.

O

Otaru, Abdulrazak Jinadu (2018) Fluid flow and acoustic absorption in porous metallic structures using numerical simulation and experimentation. PhD thesis, University of Nottingham, United Kingdom.

Owoseni, Tunji Adetayo (2021) Development of nanostructured ceramic coatings from suspension and solution precursor thermal spraying process. PhD thesis, University of Nottingham.

P

Pacella, Manuela (2014) Pulsed laser ablation of ultra-hard structures: generation of tolerant freeform surfaces for advanced machining applications. PhD thesis, University of Nottingham.

Packer, Jeffrey A. (1978) A theoretical analysis of welded steel joints in rectangular hollow sections. PhD thesis, University of Nottingham.

Palmer, James Dirk (1994) Vibrational energy flow in structures. PhD thesis, University of Nottingham.

Pan, Qing (2016) Multi-scale modelling and material characterisation of textile composites for aerospace applications. PhD thesis, University of Nottingham.

Parry, Luke Alexander (2018) Investigation of residual stress in selective laser melting. PhD thesis, University of Nottingham.

Patel, Critesh (2013) Development of discontinuous fibre preforming processes. PhD thesis, University of Nottingham.

Pearson, Stephen R. (2013) The effect of nitriding on the fretting wear of a high strength steel at ambient and elevated temperatures. PhD thesis, University of Nottingham.

Perera, Madhavie S. (2015) The use of sorbitol-initiated polylactic acid as a coupling agent in resorbable phosphate glass fibre reinforced polylactic acid composites. PhD thesis, University of Nottingham.

Pierce-Brown, Jack (2019) Effective properties of randomly heterogeneous beams. PhD thesis, University of Nottingham.

Pillai, Udit (2021) Damage modelling in fibre-reinforced composite laminates using phase field approach. PhD thesis, University of Nottingham.

Pimm, Andrew James (2011) Analysis of flexible fabric structures. PhD thesis, University of Nottingham.

Piper, David (1987) A mathematical model of frost heave in granular materials. PhD thesis, University of Nottingham.

Pitrakkos, Theodoros (2012) The tensile stiffness of a novel anchored blind-bolt component for moment-resisting connections to concrete-filled hollow sections. PhD thesis, University of Nottingham.

Popovic, Olga (1996) Reciprocal frame structures. PhD thesis, University of Nottingham.

Prabhakar, Arun (2019) Numerical simulations to assess the performance of scoop based lubrication devices for use in aero-engines. PhD thesis, University of Nottingham.

Price, W.F. (2002) Monitoring of glulam structures by theodolite intersection. PhD thesis, University of Nottingham.

Priest, Scott (2024) Metal-organic frameworks for gas storage applications. EngD thesis, University of Nottingham.

Q

Qian, Connie Cheng (2014) Structural optimisation of discontinuous carbon fibre composites. PhD thesis, University of Nottingham.

Qian, Lingyi (2017) Fabrication, characterisation and oxidation behaviour of Pt-based bond coats for high temperature applications. PhD thesis, University of Nottingham.

R

R. Jagadish, Priyanka (2019) Development and characterisation of recycled carbon fibre based films/composites for thermoelectric applications. PhD thesis, University of Nottingham.

Rahman, Taqia (2021) Early-opening-to-traffic asphalt pavement for airfield rehabilitation. PhD thesis, University of Nottingham.

Ramamoorthy, Vivek T. (2023) Heuristics and metaheuristics in the design of sound-absorbing porous materials. PhD thesis, University of Nottingham.

Raoof, Saad Mahmood (2017) Bond between textile reinforced mortar (TRM) and concrete substrate. PhD thesis, University of Nottingham.

Razeghi, Orod (2015) An investigation of a human in the loop approach to object recognition. PhD thesis, University of Nottingham.

Reeves, Jack David (2018) Sensor selection for fault diagnostics. PhD thesis, University of Nottingham.

Rengaraj, Kishen (2016) Void growth mitigation in high heating rate Out-of-Autoclave processing of composites. PhD thesis, University of Nottingham.

Rengasamy, Divish (2022) Embedding and Extracting Domain Knowledge in Machine Learning for Condition-based Maintenance. PhD thesis, University of Nottingham.

Revuz, Julia (2011) Numerical simulation of the wind flow around a tall building and its dynamic response to wind excitation. PhD thesis, University of Nottingham.

Ribeaux, Michael (2003) Energy absorbtion capability of damage affected composite structures. PhD thesis, University of Nottingham.

Roshani, D.M.R. (2005) Integrated collaborative building design using Internet technology. PhD thesis, University of Nottingham.

Rowe, Geoffrey Michael (1996) Application of the dissipated energy concept to fatigue cracking in asphalt pavements. PhD thesis, University of Nottingham.

Rowson, Matthew (2021) Understanding the evolution of superalloy microstructure during inertia friction welding using in-situ x-ray diffraction and cellular automata. PhD thesis, University of Nottingham.

Roza, Vasileva (2022) Exploring the use of open data to support citizen-led initiatives for sustainable urban development in East Africa. PhD thesis, University of Nottingham.

Ruijter, Wout (2009) Analysis of mechanical properties of woven textile composites as a function of textile geometry. PhD thesis, University of Nottingham.

Russell, Justin (2015) Progressive collapse of reinforced concrete flat slab structures. PhD thesis, University of Nottingham.

S

SHEN, JINGCHUN (2017) Investigation of a compact unglazed solar thermal façade for building integration. PhD thesis, University of Nottingham.

Saad, Abdullah Aziz (2012) Cyclic plasticity and creep of power plant materials. PhD thesis, University of Nottingham.

Saber, Mohammed (2011) Experimental and finite element studies of creep and creep crack growth in P91 and P92 weldments. PhD thesis, University of Nottingham.

Saghafifar, Hassan (2011) Microstructural stability of a nickel-based alloy overlay on a 2.25Cr1Mo steel substrate. PhD thesis, University of Nottingham.

Sahari, Berkawi Bin (1984) Finite element investigation of the incremental deformation of components. PhD thesis, University of Nottingham.

Salerno, Gervasio (2018) Process modelling of weld repair in aeroengine components. PhD thesis, University of Nottingham.

Sanchez, Salomé (2022) Creep behaviour of Laser Powder Bed Fused alloy 718. PhD thesis, University of Nottingham.

Sanchez Melo, Diana B. (2018) Meso-scale rheological characteristics of foamed bitumen mixtures with high RAP content. PhD thesis, University of Nottingham.

Sangchoom, Wantana (2016) Fabrication of porous carbons and mesoporous silica materials for energy storage and environmental applications. PhD thesis, University of Nottingham.

Scholz, Todd V. (1995) Durability of bituminous paving mixtures. PhD thesis, University of Nottingham.

Sfoungaris, Konstantinos (2022) Wave-based numerical methods for damage identification in components and structures. PhD thesis, University of Nottingham.

Shafique, Usman (2022) A rapid flow assessment tool for automated dry fibre preforms – a numerical and experimental study. PhD thesis, University of Nottingham.

Shah, Darshil Upendra (2013) Characterisation and optimisation of the mechanical performance of plant fibre composites for structural applications. PhD thesis, University of Nottingham.

Shaheen, Amrozia (2021) Development of a multi-view fringe projection system for coordinate metrology. PhD thesis, University of Nottingham.

Shaikh, Shakil Ahmed (2015) Investigating the effects of physical and cognitive demands on quality of performance and subjective responses under pacing/ takt time. PhD thesis, University of Nottingham.

Sharples, Steve David (2003) All-optical scanning acoustic microscope. PhD thesis, University of Nottingham.

Shen, Mengqi (2018) Measurement and modelling of layered plasmonic structures. PhD thesis, University of Nottingham.

Si, Yuqian (2023) On the use of swept frequency alternating current potential difference method and skin effect to detect feature geometry in flawed conductors. PhD thesis, University of Nottingham.

Siddiq, Abdur Rahman (2016) A novel method for the fabrication of porous Poly-Ether-Ether-Ketone using sodium chloride as a porogen. PhD thesis, University of Nottingham.

Sivapalan, Subarna. (2015) Engineering education for sustainable development (EESD) for undergraduate engineering programmes in Malaysia: a stakeholder defined framework. PhD thesis, University of Nottingham.

Skowron, Stephen T. (2016) Irradiation induced reactions in carbon nanomaterials in transmission electron microscopy. PhD thesis, University of Nottingham.

Smith, Robert A. (2010) Use of 3D ultrasound data sets to map the localised properties of fibre-reinforced composites. PhD thesis, University of Nottingham.

Soh, Hian Ping (2006) Fretting wear studies of aeroengine materials. PhD thesis, University of Nottingham.

Song, Bo (2018) Thermal spray and laser cladding of nickel-chromium coatings for high temperature applications. PhD thesis, University of Nottingham.

Song, Geyang (2019) The use of protective structures to reduce tunnelling induced damage to buildings. PhD thesis, University of Nottingham.

Soo Lon Wah, William Soo Pow Kune (2019) Damage detection of bridge structures under changing environmental and operational conditions. PhD thesis, University of Nottingham.

Spackman, George (2024) Optimisation of 3D profiled woven composite structures. PhD thesis, University of Nottingham.

Spirrett, Fiona (2021) Investigations into glass additive manufacturing by selective laser melting and directed energy deposition. PhD thesis, University of Nottingham.

Starkey, Christopher L. (2016) Continuous-flow hydrothermal and solvothermal synthesis of inorganic nanomaterials. PhD thesis, University of Nottingham.

Stiles, Shelley (2019) Investigation of safety leadership within infrastructure engineering construction projects. PhD thesis, University of Nottingham.

Stockford, Ian M (2004) Characterisation of layered scattering media using polarized light. PhD thesis, University of Nottingham.

Stoesslein, Moritz (2016) Method for in-situ balancing of rotatives by use of an on-the-fly pulsating material removal process. PhD thesis, University of Nottingham.

Stowell, Paul A. (2020) Short term, low strain radial tensile stiffness of a triaxial geogrid with integral junctions. MPhil thesis, University of Nottingham.

Stoyanov, Miroslav (2013) Investigation of small punch creep testing. PhD thesis, University of Nottingham.

Stuart, Bryan W. (2017) Deposition and characterisation of RF magnetron sputtered phosphate based glasses. PhD thesis, University of Nottingham.

Suchato, Nutthawut (2019) Ultrasonic instrumentation for accurate real time corrosion monitoring using permanently installed transducers. PhD thesis, University of Nottingham.

Sudaprasert, Tippaban (2002) An investigation of microstructure and sliding wear in thermally sprayed WC-Co coatings. PhD thesis, University of Nottingham.

Sun, Ke (2019) An investigation into visual content understanding based on deep learning and natural language processing. PhD thesis, University of Nottingham.

Sun, Wei (1996) Creep of service-aged welds. PhD thesis, University of Nottingham.

Suwarto, Fardzanela (2024) Performance modelling, life cycle assessment, and life cycle cost analysis of natural rubber latex modified asphalt pavement. PhD thesis, University of Nottingham.

Swarbrick, Janine Cathy (2006) Hydrogen Bonded Nanostructures on Surfaces: STM, XPS and Electrospray Deposition. PhD thesis, University of Nottingham.

T

Talbot, Frances Mary (1982) Perturbation and asymptotic methods in mechanics and waves. PhD thesis, University of Nottingham.

Tan, Bo (2017) Nondestructive evaluation of thermal barrier coatings. PhD thesis, University of Nottingham.

Tan, Chao (2018) Preparation and investigation of phosphate glass fibres and organic coupling agents for fully resorbable PGF/PCL composites. PhD thesis, University of Nottingham.

Tan, Kim Leong (2015) Development of simplified design techniques for estimating undrained bearing loads of piled-raft in soft clay. PhD thesis, University of Nottingham.

Tan, Thian Khoon (2019) Exploitation of ZnO/Fe3O4 and TiO2/Fe3O4 nanocomposites on the degradation of organic compounds. PhD thesis, University of Nottingham.

Tang, Xiaojun (2021) Shakedown analysis of pile foundations under cyclic lateral loadings. PhD thesis, University of Nottingham.

Tapia Brito, Emmanuel (2022) Application of phase change material heat storage device for control of Varroa mites in beehives. PhD thesis, University of Nottingham.

Tas, Mahmut (2022) Development of electrospun multifunctional fibrous structures for icephobic and superhydrophobic applications. PhD thesis, University of Nottingham.

Tejero Martin, Daniel (2022) Processing, microstructure, properties and performance of thermal sprayed ceramic coatings from powder, suspension and solution precursor. PhD thesis, University of Nottingham.

Tetta, Zoi (2017) Shear strengthening of concrete members with Textile Reinforced Mortar (TRM). PhD thesis, University of Nottingham.

Thew, Robert (1982) The geometrical non-linear response of some pre-tensioned cable structures. PhD thesis, University of Nottingham.

Thomas, Matthew (2022) Improving coherence scanning interferometry signal modelling and topography measurement for complex surfaces. PhD thesis, University of Nottingham.

Thompson, Adam (2019) Surface texture measurement of metal additively manufactured parts by X-ray computed tomography. PhD thesis, University of Nottingham.

Thornton, Matthew James (2005) Catalytic carbon deposition on 3-dimensional carbon fibre supports. PhD thesis, University of Nottingham.

Torres Torres, Mercedes (2015) Automatic image annotation applied to habitat classification. PhD thesis, University of Nottingham.

Turcsány, Diána (2016) Deep learning models of biological visual information processing. PhD thesis, University of Nottingham.

Turner, Paul (2016) Deformation and collapse of orthogonal 3D woven composites: quasi-static and impact loading. PhD thesis, University of Nottingham.

U

Uthayasuriyan, Arasan (2022) Advanced vibro-acoustic condensed models for multi-layer structures. PhD thesis, University of Nottingham.

W

Wadge, Matthew D. (2020) Developing unique nanoporous titanate structures for biomedical applications: mechanisms, conversion and substitution. PhD thesis, University of Nottingham.

Walton, Kirsty E. (2018) The continuous manufacture of dispersant coated bioresorbable nanoparticles. PhD thesis, University of Nottingham.

Wang, Jing (2016) Investigation of rare earth-doped ceramics as thermal barrier coating materials. PhD thesis, University of Nottingham.

Wang, Jinhuo (2008) Predictive modelling and experimental measurement of composite forming behaviour. PhD thesis, University of Nottingham.

Wang, Xiaomeng (2018) Part-based tracking with cascaded regression of neighbours. PhD thesis, University of Nottingham.

Wang, Yunqi (2018) Manufacture of yarns and textiles from novel resorbable phosphate-based glasses. PhD thesis, University of Nottingham.

Wang, Zhe (2016) Numerical simulations of geotechnical engineering problems considering the principal stress rotation. PhD thesis, University of Nottingham.

Wang, Zhiyu (2012) Hysteretic response of an innovative blind bolted endplate connection to concrete filled tubular columns. PhD thesis, University of Nottingham.

Ward, Michael (2018) Mechanical and structural performance of melt-processable bioresorbable engineering nanocomposites. PhD thesis, University of Nottingham.

Watts, Julie A. (2019) Investigations of hollow carbon nanoshell structures. PhD thesis, University of Nottingham.

Webb, Philip Francis (1994) An ultrasonics based system for the extraction of range and bearing data for multiple targets. PhD thesis, University of Nottingham.

Wen, Wu (2019) Characterisation of high temperature coatings by miniature specimen testing and inverse approaches. PhD thesis, University of Nottingham.

Wilson, Martin J. (2003) Finite element analysis of glass fibre reinforced thermoplastic composites fore structural automotive components. PhD thesis, University of Nottingham.

Wong, Soon Yee (2019) Analysis and design of axially loaded pile response to excavation-induced soil movement. PhD thesis, University of Nottingham.

Woodliffe, John Luke (2024) Magnetic framework composites for CO2 capture. PhD thesis, University of Nottingham.

Wu, Mengjuan (2023) Study on multi-phase structured icephobic constructions. PhD thesis, University of Nottingham.

X

Xiao, Qiong (2017) The loading path dependence of sand constitutive behaviour and its relationship with pressure dip in sand piles. PhD thesis, University of Nottingham.

Xiao, Zhaofei (2018) Advancements in discontinuous carbon fibre composite technologies for high-volume manufacturing processes. PhD thesis, University of Nottingham.

Xu, Bolei (2018) An investigation into automatic people counting and person re-identification. PhD thesis, University of Nottingham.

Xu, Fei (2018) The effect of viscoelasticity and damage in relation to the acceleration of fatigue and creep testing of composites using time-temperature superposition. PhD thesis, University of Nottingham.

Xue, Chenyu (2022) Assessment of the performance of low-cost GNSS receivers for deformation monitoring application. PhD thesis, University of Nottingham.

Y

Yaghi, Anas H. (1993) Static and dynamic brittle fracture. PhD thesis, University of Nottingham.

Yan, Kaiqi (2024) Coupled electrothermal modelling of plasma using unstructured Transmission-Line Modelling method. PhD thesis, University of Nottingham.

Yan, Shibo (2017) Design optimisation of 3D woven reinforcements with geometric features. PhD thesis, University of Nottingham.

Yang, Deyu (2023) Microstructure and surface design for highly efficient ice mitigation. PhD thesis, University of Nottingham.

Yang, Dunshun (2014) Microscopic study of granular material behaviours under general stress paths. PhD thesis, University of Nottingham.

Yang, Yu (2016) A numerical study of damage mechanisms in the CAI of laminated composites for aerospace applications. PhD thesis, University of Nottingham.

Yap, Kian Lim (2021) Replicating nature’s design in steel structures to enhance structural performance under transverse load. PhD thesis, University of Nottingham.

Younis, Alhammali A.A. (2016) Microstructure, mechanical properties and sliding wear behaviour of thermally sprayed cermet coatings. PhD thesis, University of Nottingham.

Yu, Tianhong (2016) Continuum damage mechanics models and their applications to composite components of aero-engines. PhD thesis, University of Nottingham.

Z

Zeng, Guohan (2018) A micromechanical study of unsaturated granular material using DEM simulation and X-ray CT. PhD thesis, University of Nottingham.

Zhang, Chao (2019) An investigation into image and video foreground segmentation and change detection. PhD thesis, University of Nottingham.

Zhang, Hanwen (2020) Monotonic, cyclic and post-cyclic shear behaviour of granular material under multi-directional simple shear. PhD thesis, University of Nottingham.

Zhang, Jiaxin (2024) Coupling granular size segregation and cyclic-loading-induced crushing effects in a continuum model. PhD thesis, University of Nottingham.

Zhang, Min (2020) DEM study of principal stress rotation in granular material. PhD thesis, University of Nottingham.

Zhang, Min (2016) An investigation of query-by-drawing image search on mobile devices. PhD thesis, University of Nottingham.

Zhang, Shengwen (2010) Carbon nanotube based composites for electricity storage in supercapacitors. PhD thesis, University of Nottingham.

Zhang, Yan (2009) Changes in microstructure and mechanical properties of P91 weld metal during creep. PhD thesis, University of Nottingham.

Zhang, Yang (2016) Development of BDD models for decision support in phased mission systems. PhD thesis, University of Nottingham.

Zhang, Yu (2011) Single-walled carbon nanotube modelling based on one-and two-dimensional Cosserat continua. PhD thesis, University of Nottingham.

Zhang, Yuwu (2018) Dynamic response of high-performance honeycomb cores and hybrid fibre composite laminates for lightweight sandwich structures. PhD thesis, University of Nottingham.

Zhao, Xiantao (2018) Multi-scale study of RTM process modelling in the manufacturing of aerospace composites. PhD thesis, University of Nottingham.

Zheng, Chi (2017) An investigation into advanced digital microscopic technologies. PhD thesis, University of Nottingham.

Zhou, Bo (2015) Tunnelling-induced ground displacements in sand. PhD thesis, University of Nottingham.

Zhu, Chendi (2021) Vibration power flow analysis of laminated composite structures. PhD thesis, University of Nottingham.

Zhu, Chenkai (2016) Scale-up manufacture and characterisation of resorbable phosphate based glass fibre for textile production. PhD thesis, University of Nottingham.

Zhu, Tengtuo (2022) A model for the role of debris ejection in development of fretting wear. PhD thesis, University of Nottingham.

Zhuang, Yan (2009) Numerical modelling of arching in piled embankments including the effects of reinforcement and subsoil. PhD thesis, University of Nottingham.

Zhuo, Peng (2020) 3D printing technology of continuous fibre reinforced polymeric composites for key load carrying structural parts and components. PhD thesis, University of Nottingham.