• Login
• Admin

2023

Bateman-Price, Thomas (2023) Applied optically detected magnetic resonance microscopy of nitrogen-vacancy defects in diamond. PhD thesis, University of Nottingham.

Gadsby, Brett (2023) Endotracheal tube placement with fibre optic sensing. PhD thesis, University of Nottingham.

Kusumam, Keerthy (2023) Multimodal analysis of depression in unconstrained environments. PhD thesis, University of Nottingham.

Majid, Shazmin (2023) Integrating the use of sensing technology to detect early warning signs of relapse for those with lived experience of bipolar disorder. PhD thesis, University of Nottingham.

Majrashi, Majed (2023) Three Dimensional Printed Immunomodulatory Scaffolds with Controlled Drug Release for Bone Regeneration. PhD thesis, University of Nottingham.

Owen, Matt J (2023) Mathematical models of thrombin generation. PhD thesis, University of Nottingham.

Smith, Conor (2023) Characterisation of CrN-NbN Superlattice Coatings, including their simulated wear debris, for total joint prosthesis bearing surface applications. PhD thesis, University of Nottingham.

2022

Adala, Inchirah (2022) Development of a coaxial electrospun scaffold for hepatic progenitor cells culture, differentiation and maturation. PhD thesis, University of Nottingham.

Arafat, Abul (2022) Development of yttrium phosphate based porous microspheres for radioembolisation therapy. PhD thesis, University of Nottingham.

Chua, Chung Han (2022) Investigation of upper limb prosthesis functionality using quantitative design tools. PhD thesis, University of Nottingham.

Encerrado Flores, Ana L. (2022) Development of biomaterial applications for the investigation of the influence of dynamic mechanical cues and matrix apparent stiffness on the behaviour of contractile cells. PhD thesis, University of Nottingham.

Pappalardo, Francesco (2022) Gelatin methacrylate hydrogel microparticle-based 3D platform for elasticity-driven multi-lineage differentation of human mesenchymal stem cells. PhD thesis, University of Nottingham.

Tarsitano, Elisa (2022) From semi-synthetic to natural biomaterials: a journey to the development of an optimized in-vitro model for liver tissue engineering. PhD thesis, University of Nottingham.

Taylor, Catherine (2022) Mapping fluid flow in porous biomaterials for tissue engineering. PhD thesis, University of Nottingham.

Yong, Ling Xin (2022) Development of Fungal Anti-Attachment Inks for 3D Printed Medical Devices. PhD thesis, University of Nottingham.

2021

Abeywardena, Chalani Lakshani (2021) Fibre optic pressure sensors in healthcare applications. PhD thesis, University of Nottingham.

Agbesanwa, Funmi (2021) Exploring the barriers and facilitators in the uptake of a novel eMDS (Biodose ConnectTM) used to support medicines adherence. PhD thesis, University of Nottingham.

Bano, Saira (2021) Suspension high velocity oxy fuel thermal spraying for biomedical coatings. PhD thesis, University of Nottingham.

Earlam, Rowan (2021) Recombinant spider silk protein hydrogels. PhD thesis, University of Nottingham.

Gonçalves Lobato de Almeida, Maria Teresa (2021) Design and fabrication of a device for three-dimensional neuronal development. PhD thesis, University of Nottingham.

He, Chenyang (2021) Optical fibre sensing for physical and biochemical health monitoring. PhD thesis, University of Nottingham.

Kret, Kayla Danielle (2021) Development and evaluation of sustainable hydrogel technologies for tissue engineering. PhD thesis, University of Nottingham.

Li, Huitong (2021) Non-covalent polymer and drug complexes as targeted delivery system for pulmonary delivery. PhD thesis, University of Nottingham.

McGirr, Joseph (2021) Self-driving cameras: automated camera capture for biological imaging. MRes thesis, University of Nottingham.

Pezeshki, Hamed (2021) Lab-on-a-chip technology platform for biophotonic applications. PhD thesis, University of Nottingham.

2020

Detamornrat, Usanee (2020) Anti-inflammatory Drug-loaded Electrospun Scaffolds Aimed at Modulating Inflammation in Chronic Skin Wounds. PhD thesis, University of Nottingham.

Henning, Irene (2020) Two-photon polymerization of alginate hydrogels for applications in cell culture. PhD thesis, University of Nottingham.

Liu, Chong (2020) Non-invasive photoplethysmography and contact pressure optical fibre sensor. PhD thesis, University of Nottingham.

Prasittisart, Pundarik (2020) Correlating drug release with microstructure of hydrogel-based delivery systems. PhD thesis, University of Nottingham.

Ramis, Jopeth (2020) Developing platforms for tissue engineering of the airways. PhD thesis, University of Nottingham.

Rizg, Waleed (2020) 3D Printing of a Medical Device Designed for Sustained Drug Delivery to the Ear. PhD thesis, University of Nottingham.

Surikutchi, Bhanu Teja (2020) Nanocapsules loaded hydrogels for intra-articular and intra-peritoneal drug delivery. PhD thesis, University of Nottingham and Universidade de Santiago de Compostela.

Thomas, Kathryn G. (2020) Phosphate based glass thin films for biofilm prevention in orthopaedic implants. PhD thesis, University of Nottingham.

Wadge, Matthew D. (2020) Developing unique nanoporous titanate structures for biomedical applications: mechanisms, conversion and substitution. PhD thesis, University of Nottingham.

Wan Zaki, Wan Suhaimizan (2020) Monitoring the pulse arrival time using optical fibre sensors. PhD thesis, University of Nottingham.

2019

Al-Natour, Mohammad (2019) Polymer nanomedicine: understanding activity at the cellular and molecular level using metabolomics. PhD thesis, University of Nottingham.

Gao, Xi (2019) Numerical modelling of the mechanical behaviour of a fully bio-resorbable glass fibre reinforced composite. PhD thesis, University of Nottingham.

Graumuller, Friedrich (2019) Investigating stem cell interactions using Atomic force microscopy. PhD thesis, University of Nottingham.

Grey, James F.E. (2019) Building an ex vivo model of breast cancer lung metastasis. PhD thesis, University of Nottingham.

Hicks, Jacqueline (2019) Carbon Nanotubes for the Rapid Detection of Intracellular Hydrogen Peroxide and its Application in Bacterial Detection. PhD thesis, University of Nottingham.

Islam, Md Towhidul (2019) Manufacture and characterisation of porous phosphate, borate and silicate glass microspheres for biomedical applications. PhD thesis, University of Nottingham.

Liu, LiangLiang (2019) Development of fibre optic bio-/chemical sensors for healthcare applications. PhD thesis, University of Nottingham.

Patel, Magdalena Maria (2019) Melt-processing of novel bioresorbable polymer nanocomposites for healthcare. PhD thesis, University of Nottingham.

Paul, Benjamin T. (2019) Additive manufacture of an in vitro neuron biosensor. PhD thesis, University of Nottingham.

Sanjuan Alberte, Paola (2019) Additive manufacturing of electrochemical systems and their application in bioelectronic medicine. PhD thesis, University of Nottingham.

Uğur, Deniz (2019) Formulation and characterization of surface functionalized PLGA based microparticles for in vitro stem cell survival. PhD thesis, University of Nottingham.

Zabidi, Adi Zakwan (2019) Computational mechanical characterisation of Schwarz P unit cell-based tissue scaffolds fabricated via two-photon polymerisation. PhD thesis, University of Nottingham.

2018

Abu Awwad, Hosam Al-Deen (2018) Controlled release system for delivery of GET peptide and its application for transcription factor delivery for bone regeneration. PhD thesis, University of Nottingham.

Abukunna, Fatima (2018) Characterization of human stem cell-derived hepatocytes. PhD thesis, University of Nottingham.

Ahmed, Shehnaz (2018) Self-reporting scaffolds for in situ monitoring for regenerative medicine and tissue engineering applications. PhD thesis, University of Nottingham.

Butler, Matthew J. (2018) Motion artefact reduction for reflection-mode photoplethysmography. PhD thesis, University of Nottingham.

Dundas, Adam Alastair (2018) Microwave synthesis of novel methacrylate monomers designed to reduce biofilm formation to surfaces. PhD thesis, University of Nottingham.

Essa, Abdulrahman (2018) A new biodegradable elastomeric polyester amide for soft tissue engineering applications. PhD thesis, University of Nottingham.

Giacaman Fonseca, Annesi (2018) Development of bioactive electrospun scaffolds to support granulation tissue formation in non-healing wounds. PhD thesis, University of Nottingham.

Hamid, Omar Abdulhakeem (2018) 3D printing of a gradient-patterned tubular scaffold for central nervous system regenerative applications. PhD thesis, University of Nottingham.

Howe, Carmel Leah (2018) Developing a novel sensor technology for detecting neural activity based on surface plasmon resonance. PhD thesis, University of Nottingham.

Low, Sze Shin (2018) Graphene/zinc oxide nanocomposite : a versatile platform for electrochemical-based genosensor. PhD thesis, University of Nottingham.

Mahmood, Tamara (2018) Micro and nano analysis of a novel polymeric bioresorbable scaffold and its drug release. PhD thesis, University of Nottingham.

Martins Figueiredo, Lara Isabel (2018) 3D Biomimetic matrices to design in vitro stem cell niches. PhD thesis, University of Nottingham.

Mistry, P. (2018) Development of a core–shell composite hydrogel for 3D bioprinting. PhD thesis, University of Nottingham.

Prina, Elisabetta (2018) Recreating 3D limbal architectures by two-photon polymerization for cornea regeneration. PhD thesis, University of Nottingham.

Ruiter, Floor A.A. (2018) Thermo-responsive electrospun scaffolds for enzymatic-free passage and mammalian cell phenotype support. PhD thesis, University of Nottingham.

Ruiz Cantu, Laura A. (2018) 3D bioprinting for potential use in nasal cartilage reconstruction. PhD thesis, University of Nottingham.

Viswanath, Aiswarya (2018) Dental stem cell delivery through new injectable matrices for spinal cord regeneration. PhD thesis, University of Nottingham and Université Catholique de Louvain.

Yang, Yang (2018) Porous scaffolds and soft hydrogel scaffolds for soft tissue engineering. PhD thesis, University of Nottingham.

2017

Chandaria, Rehma (2017) Scaffold development to engineer human intestinal epithelial tissue grafts. PhD thesis, University of Nottingham.

Chowdhury, Sanchita Sharmin (2017) The use of cross-flow membrane emulsification to fabricate large, porous polymeric microparticles for tissue engineering applications. PhD thesis, University of Nottingham.

Elmrabet, Nabila Mustafa (2017) Corrosion control of magnesium for stent applications. PhD thesis, University of Nottingham.

Howard, Sam (2017) Electronic monitoring devices: necessary steps for their successful integration with current asthma care. PhD thesis, University of Nottingham.

Hüsler, Amanda (2017) Polymer particle formation for bacterial cell attachment control. PhD thesis, University of Nottingham.

Taylor, Michael (2017) To F-SIMS/XPS chemical depth profiling of synthetic polymer hydrogels. PhD thesis, University of Nottingham.

Thomson, Ross John (2017) The psychosocial impact of home use medical devices. PhD thesis, University of Nottingham.

Ware, James (2017) Optically manipulated control over micron-scale signalling dynamics for directing cellular differentiation and migration. PhD thesis, University of Nottingham.

2016

Elsutohy, Mohamed (2016) Development of fluorescent nanosensors for real-time biological assays. PhD thesis, University of Nottingham.

Kakde, Deepak (2016) Synthesis, characterisation and applications of new polyesters for drug delivery. PhD thesis, University of Nottingham.

MOIR, LEE A (2016) The use of thermoresponsive nanoparticles for targeting cancer cells. PhD thesis, University of Nottingham.

McAlister, William (2016) Novel size separation techniques for aggregates of embryonic stem cells using the Stokes equation. PhD thesis, University of Nottingham.

Tan, Chye Cheah (2016) Medical image registration and soft tissue deformation for image guided surgery system. PhD thesis, University of Nottingham.

2015

Lee, Zhi Hou (2015) Improved multiple input multiple output blind equalization algorithms for medical implant communication. PhD thesis, University of Nottingham.

Vaithilingam, Jayasheelan (2015) Additive manufacturing and surface functionalisation of Ti6Al4V components using self-assembled monolayers for biomedical applications. PhD thesis, University of Nottingham.

2014

Desai, Arpan (2014) Development of optical pH nanosensors for biological insights into the intracellular trafficking of nanomedicines. PhD thesis, University of Nottingham.

Kirby, Giles T.S. (2014) Development of a growth factor delivery system. PhD thesis, University of Nottingham.

Lai, Daphne Teck Ching (2014) An exploration of improvements to semi-supervised fuzzy c-means clustering for real-world biomedical data. PhD thesis, University of Nottingham.

Reps, Jenna Marie (2014) Detecting adverse drug reactions in the general practice healthcare database. PhD thesis, University of Nottingham.

Tang, Selina Vi Yu (2014) Synthesis of nanomaterials for biomedical applications. PhD thesis, University of Nottingham.

2013

Felfel, Reda (2013) Manufacture and characterisation of bioresorbable fibre reinforced composite rods and screws for bone fracture fixation applications. PhD thesis, University of Nottingham.

Paik, Isha (2013) Development of an in vitro pump: mechanical characterization and surface engineering of elastomeric membranes. PhD thesis, University of Nottingham.

Sawkins, Michael John (2013) Development of three-dimensional patterning strategies for osteochondral tissue engineering. PhD thesis, University of Nottingham.

Sidney, Laura E. (2013) Tissue engineering in hostile environments: the effects and control of inflammation in bone tissue engineering. PhD thesis, University of Nottingham.

2012

Lang, Alexandra R. (2012) Medical device design for adolescents. PhD thesis, University of Nottingham.

2011

Cheikh Al Ghanami, Racha (2011) Novel thermoresponsive particle gels for tissue engineering applications. PhD thesis, University of Nottingham.

2009

Hamilton, Lloyd George (2009) New injectable scaffolds for cell and drug delivery. PhD thesis, University of Nottingham.

Majani, Ruby (2009) Gut construction: scaffolds for intestinal tissue engineering. PhD thesis, University of Nottingham.

Wang, Jau-Yi (2009) Development of multiple-breath-helium-washout system for lung function studies. PhD thesis, University of Nottingham.

2008

Dehili, Chafika (2008) Using plasma polymerised allylamine to culture hepatocytes in in-vitro fluidic bioreactor. PhD thesis, University of Nottingham.

Hidalgo-Bastida, Lilia Araida (2008) Development of a novel porous scaffold: assessment of its suitability for cardiac muscle engineering. PhD thesis, University of Nottingham.

2006

Ginty, Patric J. (2006) The supercritical processing of mammalian cells for applications in tissue engineering. PhD thesis, University of Nottingham.

2004

Unsworth, Jennifer (2004) Novel porous scaffolds for tissue engineering cartilage. PhD thesis, University of Nottingham.

2002

Salem, Aliasger K. (2002) An injectable degradable porous polymer scaffold for tissue engineering and drug delivery. PhD thesis, University of Nottingham.

1999

Black, Fiona E. (1999) The characterisation and interactions of biomedical polymers. PhD thesis, University of Nottingham.

1986

Gordon, Kerry (1986) Modelling and monitoring of medical time series. PhD thesis, University of Nottingham.