Browse by Faculties and Schools

Up a level
Export as [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Date | No Grouping
Number of items at this level: 194.

-, Salah-ud-din (2012) Behaviour of fibre reinforced cemented sand at high pressures. PhD thesis, University of Nottingham.

Abd Rahman, Norashidah (2012) Fatigue behaviour and reliability of Extended Hollobolt to concrete filled hollow section. PhD thesis, University of Nottingham.

Abdul Rahim, Khairi (2012) Heading drift mitigation for low-cost inertial pedestrian navigation. PhD thesis, University of Nottingham.

Abdulrahman, Farsat Heeto (2013) The use of targets to improve the precision of mobile laser scanning. PhD thesis, University of Nottingham.

Agrotis, Loukis George (1984) Determination of satellite orbits and the global positioning system. PhD thesis, University of Nottingham.

Ahmad, Naveed (2011) Asphalt mixture moisture sensitivity evaluation using surface energy parameters. PhD thesis, University of Nottingham.

Ahmad Al-Hadad, Botan (2011) An approach to the highway alignment development process using genetic algorithm based optimisation. PhD thesis, University of Nottingham.

Ahmed, Bashir (1996) Numerical modelling of connections in composite frames. PhD thesis, University of Nottingham.

Airey, Gordon (1997) Rheological characteristics of polymer modified and aged bitumens. PhD thesis, University of Nottingham.

Al-Ani, Wisam (2020) Numerical analysis of ground improvement using column-like elements. PhD thesis, University of Nottingham.

Alshehri, Saad Abdulrahman F. (2011) National spatial data infrastructure collaboration for the Kingdom of Saudi Arabia. PhD thesis, University of Nottingham.

Ansari, Kamran (2011) Boundary shear stress distribution and flow structures in trapezoidal channels. PhD thesis, University of Nottingham.

Apostolopoulou, Athanasia (2021) Parametric Study of different Levels of Detail in buildings for the estimation of Annual Heating Demand: A case study in London, UK. MRes thesis, University of Nottingham.

Aslam, Raveed (2008) Centrifuge modelling of piled embankments. PhD thesis, University of Nottingham.

Attili, Tommaso (2023) Numerical-laboratory modelling of waves interacting with dams and rigid-flexible plates. PhD thesis, University of Nottingham.

Aursudkij, Bhanitiz (2007) A laboratory study of railway ballast behaviour under traffic loading and tamping maintenance. PhD thesis, University of Nottingham.

Baker, David Frederick (2001) The performance of hybrid GPS and GLONASS. PhD thesis, University of Nottingham.

Beaman, Faye (2010) Large eddy simulation of open channel flows for conveyance estimation. PhD thesis, University of Nottingham.

Bell, C.A. (1978) The prediction of permanent deformation in flexible pavements. PhD thesis, University of Nottingham.

Blake, Stephen James (2008) Heave compensation using time-differenced carrier observations from low cost GPS receivers. PhD thesis, University of Nottingham.

Borghei, S.M. (1982) Oscillatory boundary layer over fixed rough beds. PhD thesis, University of Nottingham.

Bostock, Adam K. (1994) Prediction and reduction of traffic pollution in urban areas. PhD thesis, University of Nottingham.

Botterill, Neil (2010) Fluid structure interaction modelling of cables used in civil engineering structures. PhD thesis, University of Nottingham.

Boyce, John Rodney (1976) The behaviour of a granular material under repeated loading. PhD thesis, University of Nottingham.

Brito, Lelio (2011) Design methods for low volume roads. PhD thesis, University of Nottingham.

Brown, James Daniel (2012) Corporate responsibility in the UK construction industry: a study of activities and reporting. PhD thesis, University of Nottingham.

Brown, S.F. (1967) Stresses and deformations in flexible layered pavement systems subjected to dynamic loads. PhD thesis, University of Nottingham.

Buttress, Adam James (2013) Physicochemical behaviour of artificial lime stabilised sulfate bearing cohesive soils. PhD thesis, University of Nottingham.

Byfield, Michael Patrick (1996) Steel design and reliability using Eurocode 3. PhD thesis, University of Nottingham.

Cai, Wei (2015) Discrete element modelling of permanent pavement deformation in granular materials. PhD thesis, University of Nottingham.

Cai, Yanyan (2010) An experimental study of non-coaxial soil behaviour using hollow cylinder testing. PhD thesis, University of Nottingham.

Capra, Mauricio (2010) Collaborative mixed reality environments: an application for civil engineering. PhD thesis, University of Nottingham.

Chao, Chih Hung Jason (1996) Improved modelling of high precision wide area differential GPS. PhD thesis, University of Nottingham.

Chen, Cheng (2013) Discrete element modelling of geogrid-reinforced railway ballast and track transition zones. PhD thesis, University of Nottingham.

Chen, Fan (2021) Numerical and experimental investigation of tsunamis generated by iceberg calving. PhD thesis, University of Nottingham.

Cheung, Lam Wah (1994) Laboratory assessment of pavement foundation materials. PhD thesis, University of Nottingham.

Clarke, Steve (2021) Railway track asset management modelling. PhD thesis, University of Nottingham.

Clough, Peter W. L. (1977) The petrochemistry of metabasites from a precambrian amphibolite-granulite transition zone, South Norway. PhD thesis, University of Nottingham.

Cormier, Luis (2023) Analysis of the Earth-Moon Lagrange points for improving GNSS performance in lunar space. MRes thesis, University of Nottingham.

Cosser, Emily (2005) Bridge deformation monitoring with single frequency GPS augmented by pseudolites. PhD thesis, University of Nottingham.

Cox, Craig Mark (2014) Centrifuge modelling of the ground reaction curve in fibre-reinforced soil. PhD thesis, University of Nottingham.

Crockett, Peter (1994) Finite element analysis of welded tubular connections. PhD thesis, University of Nottingham.

Crossley, Amanda Jane (1999) Accurate and efficient numerical solutions for the Saint Venant equations of open channel flow. PhD thesis, University of Nottingham.

Cuciniello, Giacomo (2019) Study of the effect of laboratory-simulated ageing on the damage resistance of polymer-modified bitumens in intermediate climates. PhD thesis, University of Nottingham.

Cui, Ge (2020) Physical and numerical modelling of ground-borne vibrations in sand. PhD thesis, University of Nottingham.

Curl, S.J. (1977) The effects of refraction on engineering survey measurements. PhD thesis, University of Nottingham.

Dawson, Peter James (1997) A hierarchical approach to the management of construction project risk. PhD thesis, University of Nottingham.

Dunhill, Stuart Thomas (2002) Quasi-static characterisation of asphalt mixtures. PhD thesis, University of Nottingham.

Easom, Gary (2000) Improved turbulence models for computational wind engineering. PhD thesis, University of Nottingham.

Edwards, Earl Peter Fitz-Gerald (2005) Digital Surface Modelling in Developing Countries Using Spaceborne SAR Techniques. PhD thesis, University of Nottingham.

Elamin, Ahmed Mohamed Elamin Ahmed (2014) The face bending behaviour of blind-bolted connections to concrete-filled hollow sections. PhD thesis, University of Nottingham.

Erdem, Savas (2012) Impact load-induced microstructural damage of concrete made with unconventional aggregates. PhD thesis, University of Nottingham.

Fadoul, Abdelaziz (2020) A BIM-based model for constructability assessment of buildings design. PhD thesis, University of Nottingham.

Fahdah, Ibrahim (2008) Distributed IT for integration and communication of engineering information for collaborative building design. PhD thesis, University of Nottingham.

Falagush, Omar (2014) Discrete element modelling of cone penetration testing in granular materials. PhD thesis, University of Nottingham.

Falaye, Adewale (2023) Data mining and spatial analysis of Twitter as a resource for assessing UK water pollution. MRes thesis, University of Nottingham.

Farah, Ashraf Mohamed Ahmed (2004) GPS/Galileo simulation for reduced dynamic LEO satellite orbit determination. PhD thesis, University of Nottingham.

Fendi, Karwan Ghazi (2012) Genetic algorithms and GIS data for decision making in planning water distribution networks. PhD thesis, University of Nottingham.

Geng, Jianghui (2011) Rapid integer ambiguity resolution in GPS precise point positioning. PhD thesis, University of Nottingham.

Geng, Yan (2010) Discrete element modelling of cavity expansion in granular materials. PhD thesis, University of Nottingham.

Gillett, Simon D. (2002) Accuracy in mechanistic pavement design consequent upon unbound material testing. PhD thesis, University of Nottingham.

Görgün, Halil (1997) Semi-rigid behaviour of connections in precast concrete structures. PhD thesis, University of Nottingham.

Hampton, Christopher N. (1986) Strength and creep testing for artificial ground freezing. PhD thesis, University of Nottingham.

Hamruni, Ahmed Mohamed (2010) The use of oblique and vertical images for 3D urban modelling. PhD thesis, University of Nottingham.

Hardcastle, Alex (2021) Fully coupled elasto-plastic computational framework for fluid pressurised crack evolution in porous media. PhD thesis, University of Nottingham.

Hargreaves, David Michael (1997) Analytical and experimental studies of vehicle pollution dispersion. PhD thesis, University of Nottingham.

Hasan, Sarakot (2011) Behaviour of discontinuous precast concrete beam-column connections. PhD thesis, University of Nottingham.

Hau, Kah Wai (2003) Application of a three-surface kinematic hardening model to the repeated loading of thinly surfaced pavements. PhD thesis, University of Nottingham.

Heyken Soares, Philipp (2020) Three steps towards practical application of public transport route optimisation in urban areas. PhD thesis, University of Nottingham.

Hide, Christopher (2003) Integration of GPS and low cost INS measurements. PhD thesis, University of Nottingham.

Hopton, Stephen (2010) Modelling open channel flow. PhD thesis, University of Nottingham.

Humphreys, Nicholas David. (1995) High cross wind gust loads on ground vehicles from moving model experiments. PhD thesis, University of Nottingham.

Hyde, A.F.L. (1974) Repeated load triaxial testing of soils. PhD thesis, University of Nottingham.

Iwama, Masahiko (2009) Influence of specimen size and orientation on the mechanical properties of laboratory compacted asphalt specimens. MPhil thesis, University of Nottingham.

Jackson, Andrew (2014) Scaling for lobe and cleft patterns in particle-laden gravity currents. PhD thesis, University of Nottingham.

Jalali, Venon (2016) Performance of warm mix asphalt compacted at reduced temperature. PhD thesis, University of Nottingham.

Jia, Yudan (2011) Numerical modelling of shaft lining stability. PhD thesis, University of Nottingham.

Jones, Jonathan (2010) An assessment of the quality of GPS water vapour estimates and their use in operational meteorology and climate monitoring. PhD thesis, University of Nottingham.

Joy, Christopher Iain Harold (1998) GPS assisted helicopter photogrammetry for highway profiling. PhD thesis, University of Nottingham.

Juspi, Sumyaty (2007) Experimental validation of the shakedown concept for pavement analysis and design. PhD thesis, University of Nottingham.

Kakimpa, Bruce (2012) The numerical simulation of plate-type windborne debris flight. PhD thesis, University of Nottingham.

Keikhaei Dehdezi, Pejman (2012) Enhancing pavements for thermal applications. PhD thesis, University of Nottingham.

Kelly, David M. (2009) Bore-driven swash on a mobile beach. PhD thesis, University of Nottingham.

Kelly, Robert (1998) The influence of member orientation on hollow section joint strength. PhD thesis, University of Nottingham.

Khan, Rawid (2010) Quantification of microstructural damage in asphalt. PhD thesis, University of Nottingham.

Khong, Cuong Doan (2004) Development and numerical evaluation of unified critical state models. PhD thesis, University of Nottingham.

King, Daniel Martin. (1994) Wind/wave interactions in the surf zone. PhD thesis, University of Nottingham.

Klimkowska, Anna Maria (2020) Instance segmentation of front doors in mobile mapping system images. MRes thesis, University of Nottingham.

Knapp, Graham Anthony (2007) Improved methods for structural wind engineering. PhD thesis, University of Nottingham.

Kokkas, Nikolaos (2009) An investigation into semi-automated 3D city modelling. PhD thesis, University of Nottingham.

Lam, Dennis (1998) Composite steel beams using precast concrete hollow core floor slabs. PhD thesis, University of Nottingham.

Le, Bryant Linh Hai (2014) Modelling railway bridge asset management. PhD thesis, University of Nottingham.

Lee, Sang-Heon (2010) Numerical modelling of rapidly varied river flow. PhD thesis, University of Nottingham.

Lee, York Wei (2006) Discrete element modelling of idealised asphalt mixture. PhD thesis, University of Nottingham.

Leighton, Jonathan M (2010) GPS and PSI integration for monitoring urban land motion. PhD thesis, University of Nottingham.

Liaw, Kai (2005) Simulation of flow around bluff bodies and bridge deck sections using CFD. PhD thesis, University of Nottingham.

Lim, Wee Loon (2004) Mechanics of railway ballast behaviour. PhD thesis, University of Nottingham.

Little, Peter H. (1993) The design of unsurfaced roads using geosynthetics. PhD thesis, University of Nottingham.

Liu, Weiwei (2010) Axisymmetric centrifuge modelling of deep penetration in sand. PhD thesis, University of Nottingham.

Liu, Zhe (2012) On the investigation of bridge buffeting simulation techniques. PhD thesis, University of Nottingham.

Lloyd, Michael D. (2014) A phased mission approach to fault propagation. PhD thesis, University of Nottingham.

Loach, Simon C. (1987) Repeated loading of fine grained soils for pavement design. PhD thesis, University of Nottingham.

Long, Gavin (2010) A detailed investigation of the applicability and utility of simulation and gaming in the teaching of civil engineering students. PhD thesis, University of Nottingham.

Lu, Mingfei (2008) Discrete element modelling of railway ballast. PhD thesis, University of Nottingham.

Maggiore, Cinzia (2014) A comparison of different test and analysis methods for asphalt fatigue. PhD thesis, University of Nottingham.

Mandal, Satya Narayan (1978) The collapse behaviour of tapered steel beams. PhD thesis, University of Nottingham.

Manosalvas-Paredes, Mario (2021) Full–scale validation and implementation guidelines of combined piezoelectric sensing and big data analytics for long-term pavement performance monitoring. PhD thesis, University of Nottingham.

Marmash, Basem Ezzat (2011) The properties of recycled precast concrete hollow core slabs for use as replacement aggregate in concrete. PhD thesis, University of Nottingham.

Marri, Amanullah (2010) The mechanical behaviour of cemented granular materials at high pressures. PhD thesis, University of Nottingham.

McLintock, David Neil (1980) Very long baseline interferometry and geodetic applications. PhD thesis, University of Nottingham.

Md. Yusoff, Nur Izzi (2012) Modelling the linear viscoelastic rheological properties of bituminous binders. PhD thesis, University of Nottingham.

Meng, Xiaolin (2002) Real-time deformation monitoring of bridges using GPS/Accelerometers. PhD thesis, University of Nottingham.

Mo, Pin-Qiang (2014) Centrifuge modelling and analytical solutions for the cone penetration test in layered soils. PhD thesis, University of Nottingham.

Mohammed, Mahmoud khashaa (2015) Multi-scale response of sustainable self-compacting concrete (SCC) to carbonation and chloride penetration. PhD thesis, University of Nottingham.

Mohd Suldi, Azman Bin (2006) Investigations into un-mitigated troposphere and multipath effects on kinematic GPS for 3-dimensional monitoring of high rise buiding movements. PhD thesis, University of Nottingham.

Mohd. Jakarni, Fauzan (2012) Adhesion of asphalt mixtures. PhD thesis, University of Nottingham.

Monico, João Francisco Galera (1995) High precision inter-continental GPS network. PhD thesis, University of Nottingham.

Moore, Terry (1986) Satellite laser ranging and the determination of earth rotation parameters. PhD thesis, University of Nottingham.

Morgan, David Charles (1986) Site layout and construction planning. PhD thesis, University of Nottingham.

Mubaraki, Muhammad (2010) Predicting deterioration for the Saudi Arabia Urban Road Network. PhD thesis, University of Nottingham.

Muslich, Sutanto (2010) Assessment of bond between asphalt layers. PhD thesis, University of Nottingham.

Needham, D. (1996) Developments in bitumen emulsion mixtures for roads. PhD thesis, University of Nottingham.

Nguyen, Dinh Hung (2021) Modelling the time dependent behaviour of anisotropic soft clay using non-stationary flow surface theory. PhD thesis, University of Nottingham.

Nguyen, Viet Hung (2009) Effects of laboratory mixing methods and RAP materials on performance of hot recycled asphalt mixtures. PhD thesis, University of Nottingham.

Nixon, James Anthony Kidby (2008) Supporting navigation using different types of spatial information : an experimental human factors study. PhD thesis, University of Nottingham.

Notman, C.F. (2011) Durability testing of fine grained stabilised soils. MPhil thesis, University of Nottingham.

Nunes, Manuel Clemente Mendonça (1997) Enabling the use of alternative materials in road construction. PhD thesis, University of Nottingham.

Ogundipe, Olumide Moses (2012) Mechanical behaviour of stress absorbing membrane interlayers. PhD thesis, University of Nottingham.

Oke, Oluwaseyi Olanrewaju (2011) A study on the development of guidelines for the production of bitumen emulsion stabilised RAPs for roads in the tropics. PhD thesis, University of Nottingham.

Orliac, Etienne J. (2009) Development of azimuth dependent tropospheric mapping functions, based on a high resolution mesoscale numerical weather model, for GNSS data processing. PhD thesis, University of Nottingham.

Oti, Akponanabofa Henry (2014) Building information modelling for sustainability appraisal of conceptual design of steel-framed buildings. PhD thesis, University of Nottingham.

Packer, Jeffrey A. (1978) A theoretical analysis of welded steel joints in rectangular hollow sections. PhD thesis, University of Nottingham.

Paine, Kevin Andrew (1998) Steel fibre reinforced concrete for prestressed hollow core slabs. PhD thesis, University of Nottingham.

Paleo Cageao, Paloma (2014) Fluid-particle interaction in geophysical flows: debris flow. PhD thesis, University of Nottingham.

Palmer, Duncan. (2011) Position estimation using the Digital Audio Broadcast (DAB) signal. PhD thesis, University of Nottingham.

Paton, Jonathan (2011) Computational fluid dynamics and fluid structure interaction of yacht sails. PhD thesis, University of Nottingham.

Pearson, Steven R. (2003) On using vibration data to detect damage in model-scale reinforced concrete bridges. PhD thesis, University of Nottingham.

Pedrozo-Acuña, Diego (2013) Numerical modelling of the sorting and transport of non-uniform sediments in the swash zone. PhD thesis, University of Nottingham.

Pettey, Angus (2023) A micromechanical investigation of soil-structure interface behaviour. PhD thesis, University of Nottingham.

Philiastides, Antony (1988) Fully overlapped rolled hollow section welded joints in trusses. PhD thesis, University of Nottingham.

Pitrakkos, Theodoros (2012) The tensile stiffness of a novel anchored blind-bolt component for moment-resisting connections to concrete-filled hollow sections. PhD thesis, University of Nottingham.

Price, W.F. (2002) Monitoring of glulam structures by theodolite intersection. PhD thesis, University of Nottingham.

Quinn, Andrew (1996) The ventilation of a chick transport vehicle. PhD thesis, University of Nottingham.

Rahim, Abdur (2017) Effect of fillers on the oxidative ageing of bitumen and cohesive bond strength of mastics. PhD thesis, University of Nottingham.

Read, John (1996) Fatigue cracking of bituminous paving mixtures. PhD thesis, University of Nottingham.

Revuz, Julia (2011) Numerical simulation of the wind flow around a tall building and its dynamic response to wind excitation. PhD thesis, University of Nottingham.

Reynolds, Shirley Anne (1996) Monitoring and prediction of air polution from traffic in the urban environment. PhD thesis, University of Nottingham.

Richards, Kathryn (2003) Computational modelling of pollution dispersion in the near wake of a vehicle. PhD thesis, University of Nottingham.

Roberts, Gethin Wyn (1997) Real time on-the-fly kinematic GPS. PhD thesis, University of Nottingham.

Roodbaraky, Hilary Jane (1994) Dynamics and aerodynamics of deciduous urban trees. PhD thesis, University of Nottingham.

Roshani, D.M.R. (2005) Integrated collaborative building design using Internet technology. PhD thesis, University of Nottingham.

Rowe, Geoffrey Michael (1996) Application of the dissipated energy concept to fatigue cracking in asphalt pavements. PhD thesis, University of Nottingham.

Ruffini, Gioele (2020) Numerical characterisation of landslide-tsunamis in idealised and real water bodies. PhD thesis, University of Nottingham.

Ruiz-Riancho, N (2022) Optimisation of encapsulated oil properties to maximise asphalt self-healing. PhD thesis, University of Nottingham.

Sanders, Paul John (2001) Reinforced asphalt overlays for pavements. PhD thesis, University of Nottingham.

Scholz, Todd V. (1995) Durability of bituminous paving mixtures. PhD thesis, University of Nottingham.

Sharp, Graham Richard (1977) Reinforced concrete deep beams with web openings. PhD thesis, University of Nottingham.

Shepherd, Adrian (1986) The geochemistry and evolution of the Lizard Complex, Cornwall. PhD thesis, University of Nottingham.

Soliman, Akram S M (2003) Numerical study of irregular wave overtopping and overflow. PhD thesis, University of Nottingham.

Sriariyawat, Anurak (2010) Formation and evolution of beach cusps. PhD thesis, University of Nottingham.

Stangroom, Paul (2004) CFD modelling of wind flow over terrain. PhD thesis, University of Nottingham.

Straw, Matthew Peter (2000) Computation and measurement of wind induced ventilation. PhD thesis, University of Nottingham.

Swann, John W. (1999) Advantages and problems of combining GPS with GLONASS. PhD thesis, University of Nottingham.

Swindale, Neil (1999) Numerical modelling of river rehabilitation schemes. PhD thesis, University of Nottingham.

Taha, Ahmad Adnan Mohammad (2008) Mapping the underworld: integrated GNSS based positioning and GIS based GNSS simulation. PhD thesis, University of Nottingham.

Tan, Chuan Ming (2003) Nonlinear vibrations of cracked reinforced concrete beams. PhD thesis, University of Nottingham.

Tatlock, Benjamin (2015) A hybrid finite-volume finite-difference rotational Boussinesq-type model of surf-zone hydrodynamics. PhD thesis, University of Nottingham.

Taylor, Geoffrey (1968) The performance of labyrinth weirs. PhD thesis, University of Nottingham.

Taylor, Jackie V. (2004) Migration of contaminants associated with pavement construction. PhD thesis, University of Nottingham.

Teferle, Felix Norman (2003) Strategies for long-term monitoring of tide gauges using GPS. PhD thesis, University of Nottingham.

Thom, Nicholas (1988) Design of road foundations. PhD thesis, University of Nottingham.

Tiessen, Meinard (2010) Predicting the development of crescentic bed patterns: a comparison of linear stability model results with field observations. PhD thesis, University of Nottingham.

Wan Mohtar, Wan Hanna Melini (2011) The interaction between oscillating-grid turbulence and a sediment layer. PhD thesis, University of Nottingham.

Wang, Juan (2011) Shakedown analysis and design of flexible road pavements under moving surface loads. PhD thesis, University of Nottingham.

Wang, Jun (2005) The stress-strain and strength characteristics of Portaway Sand. PhD thesis, University of Nottingham.

Wang, Zhiyu (2012) Hysteretic response of an innovative blind bolted endplate connection to concrete filled tubular columns. PhD thesis, University of Nottingham.

Warren, Mark (2007) The development of a 3-Pass Persistent Scatterer algorithm using the Integer Ambiguity Search method. PhD thesis, University of Nottingham.

Whalley, Stephen (1990) Precise orbit determination for GPS satellites. PhD thesis, University of Nottingham.

Whitmore, Guy Matthew (1994) Coordinate reference systems for high precision geodesy. PhD thesis, University of Nottingham.

Wright, Michael (2013) A study of the effects of adding ice retardant additives to pavement surface course materials. PhD thesis, University of Nottingham.

Xu, Guangquan (2007) Wellbore stability in geomechanics. PhD thesis, University of Nottingham.

Xu, Jingmin (2020) Tunnelling effects on framed buildings. PhD thesis, University of Nottingham.

Yang, Dunshun (2014) Microscopic study of granular material behaviours under general stress paths. PhD thesis, University of Nottingham.

Yang, Lintao (2013) Experimental study of soil anisotropy using hollow cylinder testing. PhD thesis, University of Nottingham.

Yang, Tong (2004) CFD and Field Testing of a Naturally Ventilated Full-scale Building. PhD thesis, University of Nottingham.

Yoon, Boung Shik (2008) Centrifuge modelling of discrete pile rows to stabilise slopes. PhD thesis, University of Nottingham.

Yuan, Ran (2015) A non-coaxial theory of plasticity for soils with an anisotropic yield criterion. PhD thesis, University of Nottingham.

Zahran, El-Said Mamdouh Mahmoud (2010) Modelling and visualisation to support decision-making in air quality-related transport planning. PhD thesis, University of Nottingham.

Zakaria, Nur Mustakiza (2020) Characterisation of bitumen and asphalt mixture with recycled waste plastic (RWP) modified binder. PhD thesis, University of Nottingham.

Zhang, Yu (2011) Single-walled carbon nanotube modelling based on one-and two-dimensional Cosserat continua. PhD thesis, University of Nottingham.

Zhu, Fangfang (2012) 1D morphodynamical modelling of swash zone beachface evolution. PhD thesis, University of Nottingham.

Zhuang, Yan (2009) Numerical modelling of arching in piled embankments including the effects of reinforcement and subsoil. PhD thesis, University of Nottingham.

de Bono, John Patrick (2013) Discrete element modeling of cemented sand and particle crushing at high pressures. PhD thesis, University of Nottingham.

Çelik, Cahit Tăgi (1998) Crustal deformation monitoring by the Kalman filter method. PhD thesis, University of Nottingham.

This list was generated on Fri Mar 29 10:26:02 2024 UTC.