• Login
• Admin

A

Abdi, Meisam (2015) Evolutionary topology optimization of continuum structures using X-FEM and isovalues of structural performance. PhD thesis, University of Nottingham.

Ahmed, Bashir (1996) Numerical modelling of connections in composite frames. PhD thesis, University of Nottingham.

B

Barari Reshtehroudi, MohammadMahdi (2022) Structural behaviour of bending active structures. The impact of load distribution, geometry, temperature and wind loads on the structural performance. PhD thesis, University of Nottingham.

Bhuwal, Akash Singh (2023) Failure analysis and mechanical behaviors of metamaterials. PhD thesis, University of Nottingham.

Byfield, Michael Patrick (1996) Steel design and reliability using Eurocode 3. PhD thesis, University of Nottingham.

C

Cantero Chinchilla, Sergio (2020) Optimal methodologies for ultrasonic guided-wave based structural health monitoring. PhD thesis, University of Nottingham.

D

Di Napoli, Violetta (2021) Dynamics of ring-based CVGs including non-linear geometrical effects. PhD thesis, University of Nottingham.

de Araújo Vieira, Andre (2020) Strengthening of existing reinforced concrete structures against progressive collapse. PhD thesis, University of Nottingham.

F

Fong, Dickson Wen Jing (2018) Punching shear in waffle slabs in the presence of biaxial moment transfer. PhD thesis, University of Nottingham.

G

Görgün, Halil (1997) Semi-rigid behaviour of connections in precast concrete structures. PhD thesis, University of Nottingham.

H

Humphreys, Nicholas David. (1995) High cross wind gust loads on ground vehicles from moving model experiments. PhD thesis, University of Nottingham.

J

Jaafar, Hasan Abdulhussein (2017) Detection and localisation of structural deformations using terrestrial laser scanning and generalised procrustes analysis. PhD thesis, University of Nottingham.

Jayamanne, J.M.O. (2024) A feasibility analysis in incorporating low cost GNSS receivers for deformation monitoring in high rise buildings. MRes thesis, University of Nottingham.

Jong, Si-Chung (2015) Nonlinear dynamics of a vibro-impact system subjected to electromagnetic interactions. PhD thesis, University of Nottingham.

K

Kakimpa, Bruce (2012) The numerical simulation of plate-type windborne debris flight. PhD thesis, University of Nottingham.

Kariou, Florentia (2020) Textile reinforced mortars for masonry structures. PhD thesis, University of Nottingham.

Kelly, Robert (1998) The influence of member orientation on hollow section joint strength. PhD thesis, University of Nottingham.

Knapp, Graham Anthony (2007) Improved methods for structural wind engineering. PhD thesis, University of Nottingham.

L

Lu, Yang (2016) Seismic soil-structure interaction in performance-based design. PhD thesis, University of Nottingham.

M

Mohammed, Haneen Adil (2018) Design and evaluation of two-layer roller compacted concrete. PhD thesis, University of Nottingham.

P

Paine, Kevin Andrew (1998) Steel fibre reinforced concrete for prestressed hollow core slabs. PhD thesis, University of Nottingham.

Philiastides, Antony (1988) Fully overlapped rolled hollow section welded joints in trusses. PhD thesis, University of Nottingham.

Polenta, Valerio (2017) Exploiting internal pressurisation to enhance structural properties. PhD thesis, University of Nottingham.

R

Ragrag, Abdalla (2024) The performance of structural foamed concrete with textile reinforcement (TRFC). PhD thesis, University of Nottingham.

S

Sharp, Graham Richard (1977) Reinforced concrete deep beams with web openings. PhD thesis, University of Nottingham.

T

Tan, Chuan Ming (2003) Nonlinear vibrations of cracked reinforced concrete beams. PhD thesis, University of Nottingham.

Tang, Chuanjin (2024) Tunnelling effects on capped piles and masonry buildings with shallow strip foundations. PhD thesis, University of Nottingham.

V

Vagnoli, Matteo (2019) Railway bridge condition monitoring and fault diagnostics. PhD thesis, University of Nottingham.

W

Wu, Wen (2024) Physics-based guided wave structural health monitoring, and its integration in asset management modelling. PhD thesis, University of Nottingham.

Y

Yan, Jiayi (2019) Finite element implementation of Koiter's initial post-buckling analysis. PhD thesis, University of Nottingham.