Number of items at this level: **158**.

## 2021

Basford, M.J.
(2021)
*Robust, high-speed intra-vehicular communication networks for the vehicles of tomorrow.*
PhD thesis, University of Nottingham.

Dewar, David N
(2021)
*The optimal control of power electronic embedded networks in More Electric Aircraft.*
PhD thesis, University of Nottingham.

James, Jenna
(2021)
*Structure-function correlation and biophysical analysis of a novel 3D in vitro leukaemia model.*
PhD thesis, University of Nottingham.

## 2020

Gottardo, Davide
(2020)
*Single phase grid connected power converter topologies with power pulsation compensation.*
PhD thesis, University of Nottingham.

Quadri, Syed Quadir Hussain
(2020)
*On the analysis and modelling of the effects of high frequency harmonics on classical synchronous generators.*
PhD thesis, University of Nottingham.

Velmurugan, Ganeish
(2020)
*More electric aircraft starter-generator system based on switched reluctance machine: a feasibility study.*
PhD thesis, University of Nottingham.

## 2019

Hussein, Abdallah Suliman
(2019)
*SiC-based power electronics for wind energy applications.*
PhD thesis, University of Nottingham.

## 2018

Morley, Andrew
(2018)
*Advances in numerical modelling of waveguide discontinuities in a microwave receiver protector.*
MRes thesis, University of Nottingham.

Valente, Giorgio
(2018)
*Radial force control of bearingless multi-sector permanent magnet machines.*
PhD thesis, University of Nottingham.

## 2017

Najeeb, Najla
(2017)
*Design, fabrication and evaluation of a label-free silicon-on-insulator “Lab on a Chip” optical biosensor.*
PhD thesis, University of Nottingham.

## 2016

Eleffendi, Mohd Amir
(2016)
*In-service estimation of state of health of power modules.*
PhD thesis, University of Nottingham.

Nguyen, Son Thanh
(2016)
*The effects of skin moisturizers using electrical impedance spectroscopy.*
PhD thesis, University of Nottingham.

## 2015

Choi, Rebecca
(2015)
*Design and characterisation of a label free evanescent waveguide microscope.*
MPhil thesis, University of Nottingham.

Hind, David Martin
(2015)
*Current derivative estimation for sensorless motor drives.*
PhD thesis, University of Nottingham.

Khashan, Lamia M.A.
(2015)
*Dispersion analysis of two-dimensional unstructured transmission line modelling (UTLM).*
PhD thesis, University of Nottingham.

Shao, Shuai
(2015)
*The application of sliding mode observers to fault detection and isolation for multilevel converters.*
PhD thesis, University of Nottingham.

## 2014

Bottomley, Jack S.
(2014)
*Self-sensing permanent magnet servo motors.*
PhD thesis, University of Nottingham.

Carpenter, James
(2014)
*Low bandwidth laser doppler blood flowmetry.*
PhD thesis, University of Nottingham.

Deng, Wenjuan
(2014)
*A high-performance hardware architecture of an image matching system based on the optimised SIFT algorithm.*
PhD thesis, University of Nottingham.

Effah, Francis Boafo
(2014)
*Three-level Z-source hybrid direct AC-AC power converter topology.*
PhD thesis, University of Nottingham.

Kumar, Varindra
(2014)
*I/O port macromodelling.*
PhD thesis, University of Nottingham.

Meng, Xuesong
(2014)
*Modelling multi-scale problems in the transmission line modelling method.*
PhD thesis, University of Nottingham.

Patel, Rikesh Ramesh
(2014)
*Ultrastable heterodyne interferometry using a modulated light camera.*
PhD thesis, University of Nottingham.

Riley, Paul Howard
(2014)
*Designing a low-cost electricity-generating cooking stove for high-volume implementation.*
PhD thesis, University of Nottingham.

Shattock, Nicholas
(2014)
*High frequency-link cycloconverters for medium voltage grid connection.*
PhD thesis, University of Nottingham.

Tarisciotti, Luca
(2014)
*Model predictive control for advanced multilevel power converters in smart-grid applications.*
PhD thesis, University of Nottingham.

## 2013

Agbedahunsi, Alex Taiwo
(2013)
*Frequency control for microgrids using enhanced STATCOM and supercapacitor energy storage.*
PhD thesis, University of Nottingham.

Aladeloba, Abisayo Olufemi
(2013)
*Optically amplified free-space optical communication systems.*
PhD thesis, University of Nottingham.

Amankwah, Emmanuel K.
(2013)
*A parallel hybrid modular multilevel converter for high voltage DC applications.*
PhD thesis, University of Nottingham.

Arumugam, Puvaneswaran
(2013)
*Design and modelling of permanent magnet machine's windings for fault-tolerant applications.*
PhD thesis, University of Nottingham.

Chen, Rui
(2013)
*Novel particle sizing techniques.*
PhD thesis, University of Nottingham.

Kulsangcharoen, Ponggorn
(2013)
*Characterization and emulation of a new supercapacitor-type energy storage device.*
PhD thesis, University of Nottingham.

Liu, Deyun
(2013)
*Advances in beam propagation method for facet reflectivity analysis.*
PhD thesis, University of Nottingham.

McCartney, Damon Andrew
(2013)
*Development of the AnimalSeek method to evaluate the localisation ability of children under five.*
PhD thesis, University of Nottingham.

Oke, Oluwabukola A.
(2013)
*Enhanced unscented transform method for probabilistic load flow studies.*
PhD thesis, University of Nottingham.

Othman, Mohd Azlishah
(2013)
*Sub-Terahertz: generation and detection.*
PhD thesis, University of Nottingham.

Photong, Chonlatee
(2013)
*A current source inverter with series AC capacitors for transformerless grid-tied photovoltaic applications.*
PhD thesis, University of Nottingham.

Rohouma, Wesam M.M.
(2013)
*Design control and implementation of a four-leg matrix converter for ground power supply application.*
PhD thesis, University of Nottingham.

Teo, Yu Xian
(2013)
*Modelling of interconnects including coaxial cables and multiconductor lines.*
PhD thesis, University of Nottingham.

Vongurai, Rawin
(2013)
*Development of digital filtering techniques in three-dimensional TLM models.*
PhD thesis, University of Nottingham.

Xiong, Hao
(2013)
*Antenna array geometries and algorithms for direction of arrival estimation.*
MRes thesis, University of Nottingham.

Yang, Li
(2013)
*A damage-based time-domain wear-out model for wire bond interconnects in power electronic modules.*
PhD thesis, University of Nottingham.

Yang, Tao
(2013)
*Development of dynamic phasors for the modelling of aircraft electrical power systems.*
PhD thesis, University of Nottingham.

Zhang, Bei
(2013)
*Confocal surface plasmon microscopic sensing.*
PhD thesis, University of Nottingham.

Zhu, Zhongdao
(2013)
*Modeling and optimization of microwave ring resonator filters using CST software.*
MSc(Res) thesis, University of Nottingham.

## 2012

Achamfuo-Yeboah, Samuel Osei
(2012)
*Design and implementation of a CMOS Modulated Light Camera.*
PhD thesis, University of Nottingham.

Alsadi, Majid Hamid Nassar
(2012)
*Modelling of electromagnetic material properties
at microwave frequencies.*
PhD thesis, University of Nottingham.

Dantanarayana, Harshana G.
(2012)
*Application of TLM for optical microresonators.*
PhD thesis, University of Nottingham.

Degano, Marco
(2012)
*EMI filter design for matrix converters in airspace applications.*
PhD thesis, University of Nottingham.

Duan, Yu
(2012)
*A comparison of saliency based sensorless control techniques for a PM machine.*
PhD thesis, University of Nottingham.

Ellwood, Robert
(2012)
*The effect of microstructure and fatigue on the acoustoelastic response of aerospace materials.*
PhD thesis, University of Nottingham.

Huong, Audrey Kah Ching
(2012)
*Spectroscopic analysis of scattering media via different quantification techniques.*
PhD thesis, University of Nottingham.

Inrawong, Prajuab
(2012)
*Application of PCA and Hough Transform to classify features in optical images.*
PhD thesis, University of Nottingham.

Jackson, Stephen
(2012)
*Proposed pixel for custom laser doppler vibrometry camera.*
PhD thesis, University of Nottingham.

Jia, Ke
(2012)
*Impedance based fault location in power distribution systems.*
PhD thesis, University of Nottingham.

Jiang, Hui
(2012)
*Audible noise reduction in the high frequency injection based sensorless torque control for EPS applications.*
PhD thesis, University of Nottingham.

Li, Wenqi
(2012)
*Laser ultrasonic method for determination of crystallographic orientation of large grain metals by spatially resolved acoustic spectroscopy (SRAS).*
PhD thesis, University of Nottingham.

Liu, Bohan
(2012)
*Advanced ROCOF protection of distribution systems.*
PhD thesis, University of Nottingham.

Othman, Md Nazri Bin
(2012)
*Design and evaluation of high power density brushless DC permanent magnet machines.*
PhD thesis, University of Nottingham.

Pechprasarn, Suejit
(2012)
*Analysis of sensitivity and resolution in plasmonic microscopes.*
PhD thesis, University of Nottingham.

Skuriat, Robert
(2012)
*Direct jet impingement cooling of power electronics.*
PhD thesis, University of Nottingham.

Vodden, John Alan
(2012)
*Modulation techniques for the cascaded H-bridge multi-level converter.*
PhD thesis, University of Nottingham.

## 2011

Al-Ahmadi, Noorah Ahmed
(2011)
*Investigation of the electrical properties of III-V semiconductor doped with Mn.*
PhD thesis, University of Nottingham.

Almaleki, Masoud
(2011)
*Sliding mode observation of capacitor voltage in multilevel power converters.*
PhD thesis, University of Nottingham.

Chuang, Chin-Jung
(2011)
*Proximity projection grating structured illumination microscopy.*
PhD thesis, University of Nottingham.

Clark, Nicholas R
(2011)
*The role of temporal and spectral cues in the temporal integration of pitch and in pitch-based segregation of sound sources.*
PhD thesis, University of Nottingham.

Fazeli, Meghdad
(2011)
*Wind generator-energy storage control schemes for autonomous grid.*
PhD thesis, University of Nottingham.

Himsworth, John M.
(2011)
*Linear array CMOS detectors for laser doppler blood flow imaging.*
PhD thesis, University of Nottingham.

Kumar, Dinesh
(2011)
*A new multi-motor drive system based on two-stage direct power converter.*
PhD thesis, University of Nottingham.

Lavopa, Elisabetta
(2011)
*A novel control technique for active shunt power filters for aircraft applications.*
PhD thesis, University of Nottingham.

Lian, Zheng Gang
(2011)
*Fabrication of rib waveguides and optical fibres in chalcogenide glasses.*
PhD thesis, University of Nottingham.

Liu, Jun yi
(2011)
*High performance active filtering solutions for modern aircraft power network.*
PhD thesis, University of Nottingham.

Mason, Nicholas J.
(2011)
*Space vector modulation of a 4-leg matrix converter.*
PhD thesis, University of Nottingham.

Panitz, Mark
(2011)
*Wireless propagation studies in highly resonant and dynamic environments.*
PhD thesis, University of Nottingham.

Prociów, Paweł
(2011)
*Mobile psychiatry: Personalised Ambient Monitoring for the mentally ill.*
PhD thesis, University of Nottingham.

Ridgway, Leah M.
(2011)
*Magneto-dieletric properties of bismuth substituted barium hexaferrite.*
PhD thesis, University of Nottingham.

Wakatsuchi, Hiroki
(2011)
*Computational studies of the electromagnetic properties of metamaterials and applications.*
PhD thesis, University of Nottingham.

Xiao, Li
(2011)
*An investigation of dielectric tunable materials for microwave tunable devices.*
PhD thesis, University of Nottingham.

## 2010

Amuzuvi, Christian Kwaku
(2010)
*Characterisation, emulation and by-emitter degradation analysis of high power semiconductor laser diodes.*
PhD thesis, University of Nottingham.

Arca, Ahmet
(2010)
*The design and optimisation of nanophotonic devices using the Finite Element Method.*
PhD thesis, University of Nottingham.

Bener, Omer Faruk
(2010)
*Synchronisation of vascular ultrasonic scans with heart activity using ECG signals.*
MPhil thesis, University of Nottingham.

Chen, Jingsi
(2010)
*Towards single photon detection with a practical EMCCD.*
MSc(Res) thesis, University of Nottingham.

Coggins, David Paul
(2010)
*Single-ended traveling wave fault location on radial distribution lines.*
PhD thesis, University of Nottingham.

Housley, James
(2010)
*Determination of the optimum metrics for the
characterisation of scattering media.*
PhD thesis, University of Nottingham.

Huang, Yu
(2010)
*Morphology dependent voltage sensitivity of gold nanostructures.*
PhD thesis, University of Nottingham.

Jasim, Omar
(2010)
*An extended induction motor model for investigation of faulted machines and fault tolerant variable speed drives.*
PhD thesis, University of Nottingham.

Kampisios, Konstantinos T.
(2010)
*Electrical machines parameter identification using genetic algorithms.*
PhD thesis, University of Nottingham.

Mienczakowski, Martin
(2010)
*Advanced ultrasonic NDE of composite airframe components: physics, modelling and technology.*
PhD thesis, University of Nottingham.

Scott, Ian
(2010)
*Developments in time-reversal of electromagnetic fields using the transmission-line modelling method.*
PhD thesis, University of Nottingham.

Smith, Robert A.
(2010)
*Use of 3D ultrasound data sets to map the localised properties of fibre-reinforced composites.*
PhD thesis, University of Nottingham.

Tong, Xin
(2010)
*Simplified equivalent modelling of electromagnetic emissions from printed circuit boards.*
PhD thesis, University of Nottingham.

Wang, Lin
(2010)
*High-resolution structured illumination solid immersion fluorescence microscopy.*
PhD thesis, University of Nottingham.

Ward, Christopher M. S.
(2010)
*Novel NDE techniques in the power generation industry.*
EngD thesis, University of Nottingham.

## 2009

Areerak, Kongpan
(2009)
*Modelling and stability analysis of aircraft power systems.*
PhD thesis, University of Nottingham.

Dong, Peiliang
(2009)
*On-chip ultra-fast data acquisition system for optical scanning acoustic microscopy using 0.35um CMOS technology.*
PhD thesis, University of Nottingham.

Hua, Yahan
(2009)
*Sensorless control of surface mounted permanent magnet machine using fundamental PWM excitation.*
PhD thesis, University of Nottingham.

Lee, Meng Yeong
(2009)
*Three-level neutral-point-clamped matrix converter topology.*
PhD thesis, University of Nottingham.

Munuswamy, Imayavaramban
(2009)
*Avoiding regeneration with a matrix converter drive.*
PhD thesis, University of Nottingham.

Ngu, Xavier
(2009)
*An assessment of a GTEM cell as a test environment using measurements and simulations.*
PhD thesis, University of Nottingham.

Raute, Reiko
(2009)
*Sensorless control of AC machines for low and zero speed operation without additional test signal injection.*
PhD thesis, University of Nottingham.

Srithorn, Phinit
(2009)
*Control of a statcom with supercapacitor energy storage.*
PhD thesis, University of Nottingham.

Watson, Alan James
(2009)
*Selective harmonic elimination methods for a cascaded H-bridge converter.*
PhD thesis, University of Nottingham.

Xu, Tianning
(2009)
*New hybrid cycloconverters: an evaluation of their performance.*
PhD thesis, University of Nottingham.

Zhu, Qun
(2009)
*Rotating orthogonal polarization imaging.*
PhD thesis, University of Nottingham.

## 2008

Ajayi, Ajibola
(2008)
*Direct computation of statistical variations in electromagnetic problems.*
PhD thesis, University of Nottingham.

Light, Roger
(2008)
*Design and implementation of an integrating modulated light camera.*
PhD thesis, University of Nottingham.

Lopez Arevalo, Saul
(2008)
*Matrix converter for frequency changing power supply applications.*
PhD thesis, University of Nottingham.

Okaeme, Nnamdi
(2008)
*Automated robust control system design for variable speed drives.*
PhD thesis, University of Nottingham.

Zdanowicz, Mariusz Rafal
(2008)
*Numerical analysis of photonic crystal fibres.*
MRes thesis, University of Nottingham.

## 2007

Chen, Yinghui
(2007)
*Ultrasonic wave propagation in concentrated emulsions and encapsulated emulsions.*
PhD thesis, University of Nottingham.

Goodman, Andrew Simon
(2007)
*Direct energy converter controllers for switched reluctance motor operation.*
PhD thesis, University of Nottingham.

Hernandez, J. A.
(2007)
*Statistics of aberrations in polycrystalline materials.*
PhD thesis, University of Nottingham.

Li, Mengxiong
(2007)
*5 GHz Optical Front End in 0.35um CMOS.*
PhD thesis, University of Nottingham.

## 2006

Biwojno, Konrad P.
(2006)
*Embedding of fine features in multi-scale electromagnetic models.*
PhD thesis, University of Nottingham.

De Lillo, Liliana
(2006)
*A matrix converter drive system for an aircraft rudder electro-mechanical actuator.*
PhD thesis, University of Nottingham.

Rodmell, Paul Irvin
(2006)
*A novel oximeter.*
PhD thesis, University of Nottingham.

Smith, Richard
(2006)
*Optical measurement of ultra fine linewidths using artificial neural networks.*
PhD thesis, University of Nottingham.

Ungku Amirulddin, Ungku Anisa
(2006)
*Analysis and simulation of vector controlled bearingless induction motors.*
PhD thesis, University of Nottingham.

Yao, Li
(2006)
*Magnetic field modelling of machine and multiple machine systems using dynamic reluctance mesh modelling.*
PhD thesis, University of Nottingham.

## 2005

Jiang, Shihong
(2005)
*Non-scanning Fluorescence Confocal Microscopy using Laser Speckle Illumination.*
PhD thesis, University of Nottingham.

Stabler, Graham
(2005)
*High resolution wide field surface plasmon microscopy.*
PhD thesis, University of Nottingham.

## 2004

Pui, Boon Hean
(2004)
*CMOS optical centroid processor for an integrated Shack-Hartmann wavefront sensor.*
PhD thesis, University of Nottingham.

Stockford, Ian M
(2004)
*Characterisation of layered scattering media using polarized light.*
PhD thesis, University of Nottingham.

## 2003

Rajab, Maher I.
(2003)
*Neural network edge detection and skin lesions image segmentation methods: analysis and evaluation.*
PhD thesis, University of Nottingham.

Sharples, Steve David
(2003)
*All-optical scanning acoustic microscope.*
PhD thesis, University of Nottingham.

Silva, César Armando
(2003)
*Sensorless vector control of surface mounted permanent magnet machines without restriction of zero frequency.*
PhD thesis, University of Nottingham.

## 2002

Greedy, Stephen
(2002)
*Advances in the Spectral Index method for the analysis of photonic integrated circuits.*
PhD thesis, University of Nottingham.

Palethorpe, Ben
(2002)
*A novel system impedance measurement for power system analysis and improvement in power quality.*
PhD thesis, University of Nottingham.

Turl, Gary
(2002)
*A synchronised multi-motor control system using hybrid sensorless induction motor drives.*
PhD thesis, University of Nottingham.

## 2001

Teske, Nikolas
(2001)
*Sensorless position control of induction machines using high frequency signal injection.*
PhD thesis, University of Nottingham.

## 1999

Akpolat, Zuhtu Hakan
(1999)
*Application of fuzzy-sliding mode control and electronic load emulation to the robust control of motor drives.*
PhD thesis, University of Nottingham.

Butt, David
(1999)
*An investigation of harmonic correction techniques using active filtering.*
PhD thesis, University of Nottingham.

Newton, Christopher
(1999)
*The control and operation of the five level diode clamped inverter.*
PhD thesis, University of Nottingham.

## 1997

Crittenden, Mark E.
(1997)
*Real-time intrapartum fetal electrocardiogram analysis.*
PhD thesis, University of Nottingham.

Krogemann, Markus
(1997)
*The parallel resonant DC link inverter: a soft-switching inverter topology with PWM capability.*
PhD thesis, University of Nottingham.

## 1996

Ramalho, Mário António da Silva Neves
(1996)
*Edge detection using neural network arbitration.*
PhD thesis, University of Nottingham.

## 1995

Blasco Giménez, Ramón
(1995)
*High performance sensorless vector control of induction motor drives.*
PhD thesis, University of Nottingham.

Damianou., Damianos.
(1995)
*The wavelength dependence of the photoplethysmogram and its implication to pulse oximetry.*
PhD thesis, University of Nottingham.

Ebrahim, Mohammed Taha
(1995)
*A very high speed switched reluctance generator.*
PhD thesis, University of Nottingham.

Garnham, Nigel William
(1995)
*Motion compensated video coding.*
PhD thesis, University of Nottingham.

Harrison, Andrew
(1995)
*ASIC based recorders of electrophysiological signals.*
PhD thesis, University of Nottingham.

Sünter, Sedat
(1995)
*A vector controlled matrix converter induction motor drive.*
PhD thesis, University of Nottingham.

Tami, Abdelkader
(1995)
*Modelling of rotor defects in squirrel cage induction motors using the time stepping numerical field analysis.*
PhD thesis, University of Nottingham.

Trenkic, Vladica
(1995)
*The development and characterisation of advanced nodes for the TLM method.*
PhD thesis, University of Nottingham.

## 1994

Craven, Michael P.
(1994)
*Inter-chip communications in an analogue neural network utilising frequency division multiplexing.*
PhD thesis, University of Nottingham.

## 1993

Duffy, Alistair Paul
(1993)
*Coupling of electromagnetic waves into wires: experiments and simulations.*
PhD thesis, University of Nottingham.

Herring, Jonathan L.
(1993)
*Developments in the transmission-line modelling method for electromagnetic compatibility studies.*
PhD thesis, University of Nottingham.

## 1992

White, Roger D.
(1992)
*Computer modelling techniques for industrial and marine cyclo-converter drives.*
PhD thesis, University of Nottingham.

## 1990

Daemi, M.F.
(1990)
*Information theory and pattern recognition.*
PhD thesis, University of Nottingham.

Sumner, M.
(1990)
*Vector controlled induction motor drive using transputer parallel processors.*
PhD thesis, University of Nottingham.

Thomas, David William Phillip
(1990)
*Protection of major transmission lines using travelling-waves.*
PhD thesis, University of Nottingham.

## 1989

Petheram, R.J.
(1989)
*Automatic pattern recognition.*
PhD thesis, University of Nottingham.

## 1986

Naylor, Phillip
(1986)
*Coupling between electromagnetic waves and wires using transmission-line modelling.*
PhD thesis, University of Nottingham.

## 1984

Belghoraf, A.
(1984)
*Analysis of the tapered waveguide.*
PhD thesis, University of Nottingham.

## 1976

Orlowski, Rafal John
(1976)
*Ultrasonic echo reinforcement for the blind.*
PhD thesis, University of Nottingham.

## 1975

Akhtarzad, Sina
(1975)
*Analysis of lossy microwave structures and microstrip resonators by the TLM method.*
PhD thesis, University of Nottingham.

## 1973

Sanderson, J.V.H.
(1973)
*The analysis and protection of systems containing series compensated power lines.*
PhD thesis, University of Nottingham.

Slater, Geoffrey Ferguson
(1973)
*The use of finite transmission line elements in numerical analysis.*
PhD thesis, University of Nottingham.

This list was generated on **Sun Dec 5 13:56:38 2021 UTC**.