Items where Division is "Department of Mechanical, Materials and Manufacturing Engineering"

Group by: Creators | Item Type | Date | No Grouping
Jump to: 2021 | 2020 | 2019 | 2018 | 2017 | 2016 | 2015 | 2014 | 2013 | 2011 | 2010
Number of items at this level: 118.

2021

Chung, Chee Yap, Yang, Jie, He, Jun, Yang, Xiaogang, Hubbard, Richard and Ji, Dongsheng (2021) An investigation into the impact of variations of ambient air pollution and meteorological factors on lung cancer mortality in Yangtze River Delta. Science of The Total Environment, 779 . p. 146427. ISSN 00489697

Cong, Xiaoye, Khalili, Pooria, Zhu, Chenkai, Li, Saihua, Li, Jingjing, Rudd, Chris and Liu, Xiaoling (2021) Investigation of fire protection performance and mechanical properties of thin-ply bio-epoxy composites. Polymers, 13 (5). p. 731. ISSN 2073-4360

Hao, Siqi, He, Lizhe, Liu, Jiaqi, Liu, Yuhao, Rudd, Chris and Liu, Xiaoling (2021) Recovery of carbon fibre from waste prepreg via microwave pyrolysis. Polymers, 13 (8). p. 1231. ISSN 2073-4360

He, Lizhe, Liu, Xiaoling and Rudd, Chris (2021) Additive-manufactured gyroid scaffolds of magnesium oxide, phosphate glass fiber and polylactic acid composite for bone tissue engineering. Polymers, 13 (2). p. 270. ISSN 2073-4360

Jiang, Mengqi, Nanjappan, Vijayakumar, ten Bhömer, Martijn and Liang, Hai-Ning (2021) On the use of movement-based interaction with smart textiles for emotion regulation. Sensors, 21 (3). p. 990. ISSN 1424-8220

Liu, Lu, Yang, Xiaogang, Yang, Jie, Li, Guang and Guo, Yanqing (2021) Effect of hydrodynamic heterogeneity on micromixing intensification in a Taylor–Couette flow reactor with variable configurations of inner cylinder. AIChE Journal . ISSN 0001-1541

Robles-Linares, Jose A., Axinte, Dragos, Liao, Zhirong and Gameros, Andres (2021) Machining-induced thermal damage in cortical bone: necrosis and micro-mechanical integrity. Materials & Design, 197 . p. 109215. ISSN 0264-1275

Tang, Pinyan, Lawson, Glyn, Sun, Xu and Sharples, Sarah (2021) Probing cultural differences in product design and consumer evaluation using repertory grid analysis. International Journal of Technology and Design Education . ISSN 0957-7572

Tao, Shiying (2021) 1-Phenyl-1H-tetrazol as corrosion inhibitor for pipeline steel in sulfuric acid solution. International Journal of Electrochemical Science . p. 210335. ISSN 14523981

Zhang, Xiangzhi, Wang, Jing, Wang, Chengbo, Lian, Zheng, Shi, Yong, Ren, Yong and Yan, Yuying (2021) Thermophoretic collection of virus-laden (SARS-CoV-2) aerosols. Biomicrofluidics, 15 (2). 024101. ISSN 1932-1058

Zhang, Xiangzhi, Xu, Xiawei, Wang, Jing, Wang, Chengbo, Yan, Yuying, Wu, Aiguo and Ren, Yong (2021) Public-health-driven microfluidic technologies: from separation to detection. Micromachines, 12 (4). p. 391. ISSN 2072-666X

la Monaca, Andrea, Murray, James W., Liao, Zhirong, Speidel, Alistair, Robles-Linares, Jose A., Axinte, Dragos A., Hardy, Mark C. and Clare, Adam T. (2021) Surface integrity in metal machining - Part II: Functional performance. International Journal of Machine Tools and Manufacture, 164 . p. 103718. ISSN 08906955

2020

Cao, Shi, Tang, Pinyan and Sun, Xu (2020) Driver take-over reaction in autonomous vehicles with rotatable seats. Safety, 6 (3). p. 34. ISSN 2313-576X

Chen, Aihua, Zhang, Chen, Zhu, Guang and Wang, Zhong Lin (2020) Polymer materials for high‐performance triboelectric nanogenerators. Advanced Science . p. 2000186. ISSN 2198-3844

Dave, Nisarg, Vakil, Gaurang, Xu, Zeyuan, Gerada, Chris, Zhang, He and Gerada, David (2020) Comparison of slotted and slotless PM machines for high kW/kg aerospace applications. In: 2020 23rd International Conference on Electrical Machines and Systems (ICEMS). IEEE, pp. 609-613. ISBN 9784886864192

GAO, Cong, HALIM, Dunant and Yi, Xiaosu (2020) Study of bandgap property of a bilayer membrane-type metamaterial applied on a thin plate. International Journal of Mechanical Science . (In Press)

Gavin Lai, Nai Yeen, Jayasekara, Deepesh, Wong, Kok Hoong, Yu, Lih Jiun, Kang, Hooi Siang, Pawar, Kulwant and Zhu, Yingdan (2020) Advanced automation and robotics for high volume labour-intensive manufacturing. In: 2020 International Congress on Human-Computer Interaction, Optimization and Robotic Applications (HORA). IEEE, [New York], pp. 1-9. ISBN 9781728193526

Hu, Dongyuan, Zhang, Xvfeng, Liu, Xiaoling, Qin, Zhen, Hu, Li, Rudd, Chris and Yi, XiaoSu (2020) Study on toughness improvement of a rosin-sourced epoxy matrix composite for green aerospace application. Journal of Composites Science, 4 (4). p. 168. ISSN 2504-477X

Jiang, Mengqi, Bhömer, Martijn ten and Liang, Hai-Ning (2020) Exploring the design of interactive smart textiles for emotion regulation. In: HCI International 2020 – Late Breaking Papers: Digital Human Modeling and Ergonomics, Mobility and Intelligent Environments. Lecture Notes in Computer Science, 12429 (12429). Springer, Cham, pp. 298-315. ISBN 9783030599874

Kleinsmann, Maaike and ten Bhömer, Martijn (2020) The (New) roles of prototypes during the co-development of digital product service systems. International Journal of Design, 14 (1). pp. 65-79. ISSN 1991-3761

Li, Jimeng, Jing, Jing, He, Jian, Chen, Hao and Guo, Hongbo (2020) Microstructure evolution and elemental diffusion behavior near the interface of Cr2AlC and single crystal superalloy DD5 at elevated temperatures. Materials & Design, 193 . p. 108776. ISSN 02641275

Li, Xuan, Halim, Dunant and Liu, Xiaoling (2020) Forced vibration analysis of a fibre-reinforced polymer laminated beam using the green function method. In: 49th International Congress and Exposition on Noise Control Engineering, INTER-NOISE 2020, 23 - 26 August 2020, Seoul, South Korea.

Li, Xuan, Halim, Dunant and Liu, Xiaoling (2020) Vibration sensor placement for delamination detection in a beam structure based on the vibration-based chaotic oscillator method. In: 49th International Congress and Exposition on Noise Control Engineering, INTER-NOISE 2020, 23 - 26 August 202, Seoul, South Korea.

Li, Yunfa, Tu, Yifei, Lu, Jiawa and Wang, Yunchao (2020) A security transmission and storage solution about sensing image for blockchain in the internet of things. Sensors, 20 (3). p. 916. ISSN 1424-8220

Liao, Zhirong, la Monaca, Andrea, Murray, James, Speidel, Alistair, Ushmaev, Dmitrii, Clare, Adam, Axinte, Dragos and M'Saoubi, Rachid (2020) Surface integrity in metal machining - Part I: Fundamentals of surface characteristics and formation mechanisms. International Journal of Machine Tools and Manufacture, 162 . p. 103687. ISSN 08906955

Liu, Ziqian, Ramakrishna, Seeram and Liu, Xiaoling (2020) Electrospinning and emerging healthcare and medicine possibilities. APL Bioengineering, 4 (3). 030901. ISSN 2473-2877

Long, Shanshan, Yang, Jie, Huang, Xiaobing, Li, Guang, Shi, Weibin, Sommerfeld, Martin and Yang, Xiaogang (2020) Large-eddy simulation of gas–liquid two-phase flow in a bubble column reactor using a modified sub-grid scale model with the consideration of bubble-eddy interaction. International Journal of Heat and Mass Transfer, 161 . p. 120240. ISSN 00179310

Peng, Xiangjun, Huang, Zhentao and Sun, Xu (2020) Building BROOK: A multi-modal and facial video database for Human-Vehicle Interaction research. In: ACM CHI Conference on Human Factors in Computing Systems, 25-30 April 2020, Honolulu, HI, USA. (Unpublished)

Peng, Xiangjun, Huang, Zhentao, Yang, Cheng, Song, Zilin and Sun, Xu (2020) Early findings from a large-scale user study of CHESTNUT: Validations and implications. In: 22th Springer International Conference on Human-Computer Interaction, 19-24 July 2020, Copenhagen, Denmark. (Unpublished)

Pierce, Robert S and Liu, Xiaoling (2020) Exploiting the optical reflectance behaviour of carbon fibre composites for low-cost inspection and orientations analysis. Journal of Reinforced Plastics and Composites, 39 (23-24). pp. 869-879. ISSN 0731-6844

Ren, Xipei, An, Pengcheng, Bekker, Tilde, Chen, Yu, Khot, Rohit Ashok, ten Bhömer, Martijn, Wang, Yunlong and Spina, Gabriele (2020) Weaving healthy behaviors into new technology routines: Designing in (and for) the COVID-19 work-from-home period. In: 2020 ACM Designing Interactive Systems Conference, July 6–10, Eindhoven, Netherlands.

Sun, Xu, Li, Jingpeng, Tang, Pinyan, Zhou, Siyuan, Peng, Xiangjun, Li, Hao Nan and Wang, Qingfeng (2020) Exploring personalised autonomous vehicles to influence user trust. Cognitive Computation . ISSN 1866-9956

Toeters, Marina, Toussaint, Lianne, Russell, Kevin and ten Bhömer, Martijn (2020) Designing towards inward-oriented fashion technology: Demo projects. In: 2020 ACM Designing Interactive Systems Conference, July 6–10, Eindhoven, Netherlands.

Wang, Jing, Ren, Yong and Zhang, Bei (2020) Application of microfluidics in biosensors. In: Advances in Microfluidic Technologies for Energy and Environmental Applications. IntechOpen, London, United Kingdom, pp. 59-75. ISBN 9781789844191

Wang, Xuehui, Yan, Yuying, Li, Bo, Hao, Xinyue, Gao, Neng and Chen, Guangming (2020) Prospect of solar-driven ejector-compression hybrid refrigeration system with low GWP refrigerants in summer of Guangzhou and Beijing. International Journal of Refrigeration, 117 . pp. 230-236. ISSN 01407007

Yan, Yuxin, Shin, Woo In, Chen, Hao, Lee, Shar-Mun, Manickam, Sivakumar, Hanson, Svenja, Zhao, Haitao, Lester, Edward, Wu, Tao and Pang, Cheng Heng (2020) A recent trend: application of graphene in catalysis. Carbon Letters . ISSN 1976-4251

Yusuf, Abubakar, Sun, Yong, Ren, Yong, Snape, Colin, Wang, Chengjun, Jia, Hongpeng and He, Jun (2020) Opposite effects of Co and Cu dopants on the catalytic activities of birnessite MnO2 catalyst for low-temperature formaldehyde oxidation. The Journal of Physical Chemistry C, 124 (48). pp. 26320-26331. ISSN 1932-7447

Zhou, Siyuan, Sun, Xu, Shi, Zhiyu and Lu, Yanyi (2020) The use of augmented reality for solving arithmetic problems for preschool children. Lecture Notes in Computer Science, 12206 . pp. 574-584. ISSN 0302-9743

Zhou, Yong, Liu, Anna, Xu, Yongzheng, Guo, Yunli, Yi, XiaoSu and Jia, Yuxi (2020) Frequency-dependent orthotropic damping properties of Nomex honeycomb composites. Thin-Walled Structures, 160 . p. 107372. ISSN 02638231

2019

Yi, Xiaosu and Tserpes, Konstantinos, eds. (2019) ECO-COMPASS: Ecological and multifunctional composites for application in aircraft interior and secondary structures. MDPI, Basel, Switzerland. ISBN 978-3-03897-691-2

Chan, Yue, Lee, Shern-Long, Chen, Wenjian, Zheng, Lian, Shi, Yong and Ren, Yong (2019) Newtonian flow inside carbon nanotube with permeable boundary taking into account van der Waals forces. Scientific Reports, 9 (1). ISSN 2045-2322

Chen, Yanghui, Wei, Xiaoyan, Li, Huayang, Fan, Youjun, Hu, Weiguo and Zhu, Guang (2019) Stretchable hybrid bilayered luminescent composite based on the combination of strain-induced and triboelectrification-induced electroluminescence. ACS Omega, 4 (24). pp. 20470-20475. ISSN 2470-1343

Gao, Cong, Halim, Dunant and Rudd, Chris (2019) Vibration absorption performance of membrane-type metamaterial on a thin plate. In: INTER-NOISE and NOISE-CON Congress and Conference Proceedings. Institute of Noise Control Engineering. ISBN 9788487985317

Gao, Cong, Halim, Dunant and Rudd, Chris (2019) Prediction of bandgaps in membrane-type metamaterial attached to a thin plate. In: INTER-NOISE and NOISE-CON Congress and Conference Proceedings. Institute of Noise Control Engineering. ISBN 978-848798531-7

He, Lizhe, Zhong, Jiahui, Zhu, Chenkai and Liu, Xiaoling (2019) Mechanical properties and in vitro degradation behavior of additively manufactured phosphate glass particles/fibers reinforced polylactide. Journal of Applied Polymer Science . p. 48171. ISSN 0021-8995

Lei, Shurong, Shi, Yong, Yan, Yuying and Zhang, Xingxing (2019) Numerical study on inertial effects on liquid-vapor flow using lattice Boltzmann method. Energy Procedia, 160 . pp. 428-435. ISSN 1876-6102

Li, Huayang, Guo, Zihao, Kuang, Shuangyang, Wang, Hailu, Wang, Ying, Wu, Tao, Wang, Zhong Lin and Zhu, Guang (2019) Nanocomposite electret with surface potential self-recovery from water dipping for environmentally stable energy harvesting. Nano Energy, 64 . p. 103913. ISSN 22112855

Li, Yunfa, Tu, Yifei and Lu, Jiawa (2019) Multi-point collaborative authentication method based on user image intelligent collection in the internet of things. Electronics, 8 (9). p. 978. ISSN 2079-9292

Peng, Xiangjun, Wang, Qingfeng, Sun, Xu, Gong, Chunye and Wang, Yaohua (2019) Succinct Representations in Collaborative Filtering: A Case Study using Wavelet Tree on 1,000 Cores. In: 2019 20th International Conference on Parallel and Distributed Computing, Applications and Technologies (PDCAT), 5-7 Dec. 2019, Gold Coast, Australia, Australia.

Peng, Xiangjun, Zhang, Hongzhi, Zhou, Xiaosong, Wang, Shuolei, Sun, Xu and Wang, Qingfeng (2019) CHESTNUT: Improve serendipity in movie recommendation by an Information Theory-based collaborative filtering approach. Working Paper. Unpublished. (Unpublished)

Pierce, Robert S. and Falzon, Brian G. (2019) Modelling the size and strength benefits of optimised step/scarf joints and repairs in composite structures. Composites Part B: Engineering, 173 . p. 107020. ISSN 1359-8368

Song, Zili, Wang, Shuolei, Kong, Weikai, Peng, Xiangjun and Sun, Xu (2019) First attempt to build realistic driving scenes using video-to-video synthesis in OpenDS framework. In: Proceedings of the 11th International Conference on Automotive User Interfaces and Interactive Vehicular Applications: Adjunct Proceedings. Association for Computing Machinery, Utrecht, Netherlands, pp. 387-391. ISBN 9781450369206

Tang, Pinyan, Sun, Xu, Law, Effie Lai-Chong, Wang, Qingfeng, Cobb, Sue and Zhou, Xiaosong (2019) User-centered design approaches to integrating intellectual property information into early design processes with a design patent retrieval application. International Journal of Human–Computer Interaction . pp. 1-19. ISSN 1044-7318

Telford, R., O'Carroll, A., Pierce, R.S. and Young, T.M. (2019) A novel method to produce kiss-bonds in composites components for NDI and characterisation purposes. Composites Part B: Engineering, 173 . p. 106926. ISSN 1359-8368

Wang, Hai Lu, Kuang, Shuang Yang, Li, Hua Yang, Wang, Zhong Lin and Zhu, Guang (2019) Large‐area integrated triboelectric sensor array for wireless static and dynamic pressure detection and mapping. Small . p. 1906352. ISSN 1613-6810

Wang, Hui, Zheng, Lin, Yan, Mingbao, Wang, Jiafu, Qu, Shaobo and Luo, Ruitao (2019) Design and analysis of miniaturized low profile and second-order multi-band polarization selective surface for multipath communication application. IEEE Access, 7 . pp. 13455-13467. ISSN 2169-3536

Yang, Jian, Jiang, Jason Zheng and Neild, Simon A. (2019) Dynamic analysis and performance evaluation of nonlinear inerter-based vibration isolators. Nonlinear Dynamics . ISSN 0924-090X

Yew, Maxine, Ren, Yong, Koh, Kai Seng, Sun, Chenggong, Snape, Colin and Yan, Yuying (2019) Synthesis of microcapsules for carbon capture via needle-based droplet microfluidics. Energy Procedia, 160 . pp. 443-450. ISSN 18766102

Zhang, XuFeng, Li, Dihui, Liu, Kejian, Tong, Jianfeng and Yi, XiaoSu (2019) Flexible graphene-coated carbon fiber veil/polydimethylsiloxane mats as electrothermal materials with rapid responsiveness. International Journal of Lightweight Materials and Manufacture . ISSN 2588-8404

Zhao, Haitao, Zheng, Chenghang, Džapo, Hrvoje, Liu, Shaojun, Guo, Yishan, Gao, Xiang and Wu, Tao (2019) A perspective on the applications of energy-cyber-physical systems (e-CPSs) in ultra-low emission coal-fired power plants. Energy Procedia, 158 . pp. 6139-6144. ISSN 1876-6102

Zhu, Chenkai, Li, Jingjing, Clement, Mandy, Yi, Xiaosu, Rudd, Chris and Liu, Xiaoling (2019) The effect of intumescent mat on post-fire performance of carbon fibre reinforced composites. Journal of Fire Sciences, 37 (3). pp. 257-272. ISSN 0734-9041

2018

Chen, H., Rushworth, Adam, Sun, Wei, He, J. and Guo, H. (2018) Some considerations in using the small punch testing for thermally sprayed CoNiCrAlY coatings. Surface and Coatings Technology, 357 . pp. 684-690. ISSN 1879-3347

Costa Junior, Jairo da, Diehl, Jan Carel and Secomandi, Fernando (2018) Educating for a systems design approach to complex societal problems. Journal of Engineering Design, 29 (3). pp. 65-86. ISSN 1466-1837

Ezeh, Collins I., Yang, Xiaogang, He, Jun, Snape, Colin and Cheng, Xiao Min (2018) Correlating ultrasonic impulse and addition of ZnO promoter with CO2 conversion and methanol selectivity of CuO/ZrO2 catalysts. Ultrasonics Sonochemistry, 42 . pp. 48-56. ISSN 1873-2828

Gao, Xi, Chen, Menghao, Yang, Xiaogang, Harper, Lee, Ahmed, Ifty and Lu, Jiawa (2018) Simulating damage onset and evolution in fully bio-resorbable composite under three-point bending. Journal of the Mechanical Behavior of Biomedical Materials, 81 . pp. 72-82. ISSN 1751-6161

Kone, Jean-Paul, Zhang, Xinyu, Yan, Yuying, Hu, Guilin and Ahmadi, Goodarz (2018) CFD modeling and simulation of PEM fuel cell using OpenFOAM. Energy Procedia, 145 . pp. 64-69. ISSN 1876-6102

Li, Hao Nan and Axinte, Dragos (2018) On the inverse design of discontinuous abrasive surface to lower friction-induced temperature in grinding: an example of engineered abrasive tools. International Journal of Machine Tools and Manufacture, 132 . pp. 50-63. ISSN 0890-6955

Ma, Nan, Yu, Jingjun, Dong, Xin and Axinte, Dragos (2018) Design and stiffness analysis of a class of 2-DoF tendon driven parallel kinematics mechanism. Mechanism and Machine Theory, 129 . pp. 202-217. ISSN 1873-3999

Niu, Jie, Choo, Hui Leng, Sun, Wei and Mok, Sui Him (2018) Analytical solution and experimental study of effective Young’s modulus of SLM-fabricated lattice structure with triangular unit cells. Journal of Manufacturing Science and Engineering, 140 (9). 091008. ISSN 1528-8935

Tan, Chao, Rudd, Chris, Parsons, Andrew, Sharmin, Nusrat, Zhang, Junxiao, Chen, Wanru and Ahmed, Ifty (2018) Chitosan as a coupling agent for phosphate glass fibre/polycaprolactone composites. Fibers, 6 (4). 97/1-97/25. ISSN 2079-6439

Yang, Sichang, Zhang, Xinyu, Wang, Bo, Huang, Hanzhe, Zhao, Zirui, Wang, Xinyuan, Yu, Kaili and Ahmadi, Goodarz (2018) A practical low-cost approach to build membrane electrode assemblies using decal transfer technique. Energy Procedia, 145 . pp. 458-463. ISSN 1876-6102

Yang, Wenbo, Yuan, Ran and Wang, Juan (2018) Vibration induced by subway trains: open-trench mitigation analysis in the time and frequency domains. Shock and Vibration, 2018 . 1879392/1-1879392/16. ISSN 1070-9622

2017

Chen, H. and McCartney, D.G. (2017) Some aspects on modelling of the β-phase depletion behaviour under different oxide growth kinetics in HVOF CoNiCrAlY coatings. Surface and Coatings Technology, 313 . pp. 107-114. ISSN 1879-3347

Chen, H., Pala, Z., Hussain, T. and McCartney, D.G. (2017) Fabrication and microstrain evolution of Al-TiB2 composite coating by cold spray deposition. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications . pp. 1-9. ISSN 2041-3076

Chen, H., Si, Y.Q. and McCartney, D.G. (2017) An analytical approach to the β-phase coarsening behaviour in a thermally sprayed CoNiCrAlY bond coat alloy. Journal of Alloys and Compounds . ISSN 1873-4669

Chen, Hao, Jackson, G.A. and Sun, Wei (2017) An overview of using small punch testing for mechanical characterization of MCrAlY bond coats. Journal of Thermal Spray Technology, 26 (6). pp. 1222-1238. ISSN 1544-1016

He, Lizhe, Chenhai, Zhu, Cong, Xiaoye, Rudd, Chris D. and Liu, Xiaoling (2017) Hybrid composites of silica glass fibre/nano-hydroxyapatite/polylactic acid for medical application. In: 21st International Conference on Composite Materials (ICCM-21), 20-25 August 2017, Xi'an; China.

He, Yan, Huang, Tao, Wang, Yan, Nie, Yi, Li, YuFeng and Wang, Yulin (2017) A new lightweight design method integrating shape optimization with life cycle assessment for extrusion dies. Journal of Cleaner Production, 150 . pp. 47-57. ISSN 1879-1786

Hong, Jiaju, Liu, Sheng and Yan, Yuying (2017) Bionic inspired study of heat pipe from plant water migration. Energy Procedia, 110 . pp. 567-573. ISSN 1876-6102

Huang, Kuo, Li, Bo, Yan, Yuying, Li, Yong, Twaha, Ssennoga and Zhu, Jie (2017) A comprehensive study on a novel concentric cylindrical thermoelectric power generation system. Applied Thermal Engineering, 117 . pp. 501-510. ISSN 1873-5606

Kone, Jean-Paul, Zhang, Xinyu, Yan, Yuying, Hu, Guilin and Ahmadi, Goodarz (2017) Three-dimensional multiphase flow computational fluid dynamics models for proton exchange membrane fuel cell: a theoretical development. Journal of Computational Multiphase Flows, 9 (1). pp. 3-25. ISSN 1757-4838

Li, Hao Nan and Axinte, Dragos A. (2017) On a stochastically grain-discretised model for 2D/3D temperature mapping prediction in grinding. International Journal of Machine Tools and Manufacture, 116 . pp. 60-76. ISSN 0890-6955

Liao, Zhirong, Axinte, Dragos A. and Gao, Dong (2017) A novel cutting tool design to avoid surface damage in bone machining. International Journal of Machine Tools & Manufacture, 116 . pp. 52-59. ISSN 0890-6955

Lim, Chang Nong, Koh, Kai Seng, Ren, Yong, Chin, Jit Kai, Shi, Yong and Yan, Yuying (2017) Analysis of liquid–liquid droplets fission and encapsulation in single/two layer microfluidic devices fabricated by xurographic method. Micromachines, 8 (2). 49/1-49/17. ISSN 2072-666X

Liu, Minghua, Shi, Yong, Yan, Jiashu and Yan, Yuying (2017) Lattice Boltzmann simulation of flow and heat transfer in random porous media constructed by simulated annealing algorithm. Applied Thermal Engineering, 115 . pp. 1348-1356. ISSN 1873-5606

Mareta, Sannia, Halim, Dunant and Popov, Atanas A. (2017) Control of vibration using compliant actuators. Journal of Vibration and Acoustics, 139 (5). 051007/1-051007/13. ISSN 1048-9002

Shi, Weibin, Yang, Ning and Yang, Xiaogang (2017) A kinetic inlet model for CFD simulation of large-scale bubble columns. Chemical Engineering Science, 158 . pp. 108-116. ISSN 1873-4405

Sun, Xu, May, Andrew and Wang, Qingfeng (2017) Investigation of the role of mobile personalisation at large sports events. International Journal of Mobile Human Computer Interaction, 9 (1). pp. 1-15. ISSN 1942-3918

Wang, Qingfeng and Sun, Xu (2017) Crude oil price: Demand, supply, economic activity, economic policy uncertainty and wars: from the perspective of structural equation modelling (SEM). Energy, 133 . pp. 483-490. ISSN 0360-5442

Yang, Jian, Jiang, Jason Z., Zhu, Xiang and Chen, Hao (2017) Performance of a dual-stage inerter-based vibration isolator. Energy Procedia, 199 . pp. 1822-1827. ISSN 1876-6102

Zhao, Haitao, Yang, Gang, Mu, Xueliang, Cao, Pengfei, Gao, Xiang and Wu, Tao (2017) Hg 0 capture over MoS2 nanosheets containing adsorbent: effects of temperature, space velocity, and other gas species. Energy Procedia, 105 . pp. 4408-4413. ISSN 1876-6102

Zhou, Xiaosong, Xu, Zhan, Sun, Xu and Wang, Qingfeng (2017) A new information theory-based serendipitous algorithm design. Lecture Notes in Artificial Intelligence, 10274 . pp. 314-327. ISSN 0302-9743

Zhu, Chenkai, Ahmed, Ifty, Parsons, Andy J., Wang, Yunqi, Tan, Chao, Liu, Jingsong, Rudd, Chris D. and Liu, Xiaoling (2017) Novel bioresorbable textile composites for medical applications. In: 21st International Conference on Composite Materials (ICCM-21), 20-25 August 2017, Xi'an, China.

2016

Hartono, Dennis, Halim, Dunant, Roberts, Gethin Wyn and Liu, Qianyu (2016) Vibration-based fault diagnostic of a spur gearbox. MATEC Web of Conferences, 70 . 02004/1-02004/5. ISSN 2261-236X

Hartono, Dennis, Halim, Dunant, Widodo, Achmad and Roberts, Gethin Wyn (2016) Time-frequency enhancement technique for bevel gear fault diagnosis. MATEC Web of Conferences, 70 . 02003/1-02003/5. ISSN 2261-236X

Hartono, Dennis, Halim, Dunant, Widodo, Achmad and Roberts, Gethin Wyn (2016) Comparative study of gearbox fault diagnosis by vibration measurements. MATEC Web of Conferences, 65 . 01003/1-01003/4. ISSN 2261-236X

Hartono, Dennis, Halim, Dunant, Widodo, Achmad and Roberts, GethinWyn (2016) Bevel gearbox fault diagnosis using vibration measurements. MATEC Web of Conferences, 59 . ISSN 2261-236X

Ip, Carman K.M., Li, Shan-Shan, Tang, Matthew Y.H., Sy, Samuel K.H., Ren, Yong, Shum, Ho Cheung and Wong, Alice S.T. (2016) Stemness and chemoresistance in epithelial ovarian carcinoma cells under shear stress. Scientific Reports, 6 . p. 26788. ISSN 2045-2322

Kyaw, Si Thu, Rouse, James Paul, Lu, J. and Sun, Wei (2016) Effects of surface roughness on thermo-mechanical fatigue life of a P91 power plant steel. Procedia Structural Integrity, 2 . pp. 664-672. ISSN 2452-3216

Ren, Yong, Koh, Kai Seng and Zhang, Yaping (2016) Synthesis of functional materials by non-Newtonian microfluidic multiphase system. In: Advances in microfluidics - new applications in biology, energy, and materials Sciences. INTECH, pp. 359-384.

Ren, Yong and Leung, Wallace (2016) Numerical investigation of cell encapsulation for multiplexing diagnostic assays using novel centrifugal microfluidic emulsification and separation platform. Micromachines, 7 (2). p. 17. ISSN 2072-666X

Rushworth, Adam, Axinte, Dragos, Raffles, Mark and Cobos-Guzman, Salvador (2016) A concept for actuating and controlling a leg of a novel walking parallel kinematic machine tool. Mechatronics, 40 . pp. 63-77. ISSN 0957-4158

Schnädelbach, Holger, Sun, Xu, Kefalidou, Genovefa, Coughlan, Tim, Meese, Rupert, Norris, James and McAuley, Derek (2016) Creativity Greenhouse: at-a-distance collaboration and competition over research funding. International Journal of Human-Computer Studies, 87 . pp. 1-19. ISSN 1071-5819

Wang, Juan, Liu, Shu and Yu, Hai-Sui (2016) A comparison between a shakedown design approach and the analytical design approach in the UK for flexible road pavements. Procedia Engineering, 143 . pp. 971-978. ISSN 18777058

Wei, Zhen, Xu, Z. and Halim, Dunant (2016) Study of HEV power management control strategy based on driving pattern recognition. Energy Procedia, 88 . pp. 847-853. ISSN 1876-6102

Wu, Jinshun, Zhang, Xingxing, Shen, Jingchun, Wu, Yupeng, Connelly, Karen, Yang, Tong, Tang, Llewellyn, Xiao, Manxuan, Wei, Yixuan, Jiang, Ke, Chen, Chao, Xu, Peng and Wang, Hong (2016) A review of thermal absorbers and their integration methods for the combined solar photovoltaic/thermal (PV/T) modules. Renewable and Sustainable Energy Reviews, 75 . pp. 839-854. ISSN 13640321

Yang, Jian (2016) Force transmissibility and vibration power flow behaviour of inerter-based vibration isolators. Journal of Physics: Conference Series, 744 (1). 012234. ISSN 1742-6588

2015

Hao, J., Lin, Y.J., Nie, Y., Wu, M. and Ludwig, A. (2015) Modelling of macrosegregation in direct chill casting considering columnar-to-equiaxed transition using 3-phase Eulerian approach. IOP Conference Series: Materials Science and Engineering, 84 . 012061/1-01206/8. ISSN 1757-899X

Shi, Yong, Yap, Ying Wan and Sader, John E. (2015) Linearized lattice Boltzmann method for micro- and nanoscale flow and heat transfer. Physical Review E, 92 (1). 013307/1-013307/13. ISSN 1550-2376

Shih, Yi Teng, Sher, William D. and Taylor, Mark (2015) Understanding creative design processes by integrating sketching and CAD modelling design environments: a preliminary protocol result from architectural designers. ArchNet-IJAR, 9 (3). pp. 76-92. ISSN 1938-7806

2014

Chen, Changrong, Wang, Yan, Ou, Hengan, He, Yan and Tang, Xianzhi (2014) A review on remanufacture of dies and moulds. Journal of Cleaner Production, 64 . pp. 13-23. ISSN 1879-1786

Liu, Ying, Dong, Haibo, Lohse, Niels, Petrovic, Sanja and Gindy, Nabil (2014) An investigation into minimising total energy consumption and total weighted tardiness in job shops. Journal of Cleaner Production, 65 . pp. 87-96. ISSN 0959-6526

Shi, Yong, Yap, Ying Wan and Sader, John E. (2014) Lattice Boltzmann method for linear oscillatory noncontinuum flows. Physical Review E, 89 (3). 033305/1-033305/11. ISSN 2470-0053

2013

Li, Yufeng, He, Yan, Wang, Yan, Yan, Ping and Liu, Xuehui (2013) A framework for characterising energy consumption of machining manufacturing systems. International Journal of Production Research, 52 (2). pp. 314-325. ISSN 1366-588X

Sun, Xu, Golightly, David, Cranwell, Jo, Bedwell, Benjamin D. and Sharples, Sarah (2013) Participant experiences of mobile device-based diary studies. International Journal of Mobile Human Computer Interaction, 5 (2). pp. 62-83. ISSN 1942-3918

Sun, Xu and May, Andrew (2013) A comparison of field-based and lab-based experiments to evaluate user experience of personalised mobile devices. Advances in Human-Computer Interaction, 2013 . 619767/1-619767/9. ISSN 1687-5893

2011

Wang, Y., Wang, Z.-J. and Gindy, Nabil (2011) A method for representation of component geometry using discrete pin for reconfigurable moulds. Advances in Engineering Software, 42 (7). pp. 409-418. ISSN 1873-5339

2010

Wang, Zhijiang, Wang, Yan and Gindy, Nabil (2010) Planning and control of a hybrid vacuum-forming system based on screw-pin tooling. WSEAS Transactions on Systems and Control, 5 (7). pp. 557-566. ISSN 1991-8763

This list was generated on Fri Dec 6 15:52:22 2024 UTC.