Tuneable ionic control of polymeric films for inkjet based 3D printing

Tools

Karjalainen, Erno, Wales, Dominic J., Gunasekera, Deshani H.A.T, Dupont, Jairton, Licence, Peter, Wildman, Ricky D. and Sans, Victor (2018) Tuneable ionic control of polymeric films for inkjet based 3D printing. ACS Sustainable Chemistry & Engineering . ISSN 2168-0485

Full text not available from this repository.

Abstract

Inkjet printing is a powerful additive manufacturing (AM) technique to generate advanced and complex geometries. However, requirements of low viscosity and surface tension are limiting the range of functional inks available, thus hindering the development of novel applications and devices. Here, we report a method to synthesise materials derived from highly viscous or even solid monomers in a simple, flexible fashion and with the potential to be integrated in the printing process. Polymerisable ionic liquids (PILs) have been employed as a proof of principle due to the broad range of properties available upon fine tuning of the anion/cation pair and the high viscosity of the monomers. The method consists of the deposition and polymerization of a PIL precursor, followed sequentially by quaternisation and anion metathesis of the films. The fine control over the mechanical and superficial properties of inkjet printable polymeric films of neutral and cationic nature by post-polymerization reactions is demonstrated for the first time. A family of different polycationic materials has been generated by modification of cross-linked copolymers of butyl acrylate and vinyl imidazole with liquid solutions of functional reagents. The variation in the mechanical, thermal and surface properties of the films demonstrates the success of this approach. The same concept has been applied to a modified formulation, designed for optimal inkjet printing. This work will pave the way for a broad range of applications of inkjet printing, with a plethora of anion-cation combinations characteristic of PILs, thus enormously broadening the range of applications available in additive manufacturing.

Item Type: Article
RIS ID: https://nottingham-repository.worktribe.com/output/911055
Additional Information: This document is the unedited Author’s version of a Submitted Work that was subsequently accepted for publication in ACS Sustainable Chemistry & Engineering, copyright © 2018 American Chemical Society after peer review. To access the final edited and published work see https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.7b04279
Keywords: polymeric ionic liquids, inkjet, 3D printing, smart materials, additive manufacturing, mechanical properties
Schools/Departments: University of Nottingham, UK > Faculty of Engineering
Identification Number: https://doi.org/10.1021/acssuschemeng.7b04279
Depositing User: Eprints, Support
Date Deposited: 16 Feb 2018 13:04
Last Modified: 04 May 2020 19:31
URI: https://eprints.nottingham.ac.uk/id/eprint/49831

Actions (Archive Staff Only)

Edit View Edit View