An investigation on using pre-treated tyre rubber as a replacement of synthetic polymers for bitumen modification

Subhy, Ayad, Lo Presti, Davide and Airey, Gordon (2015) An investigation on using pre-treated tyre rubber as a replacement of synthetic polymers for bitumen modification. Road Materials and Pavement Design, 16 . ISSN 1468-0629

Full text not available from this repository.

Abstract

Rubberized bitumen obtained through a swelling process, has widely proven to be a successful technology for asphalt pavement applications and a solution to reduce the dismantling of tyre rubber on landfills. However, this technology presents two main operative issues which needs the adoption of costly special equipment. Firstly, significant high value of High Temperature Viscosity (HTV) which imposes mixing and compaction difficulties and leads to increased energy consumption and emissions. Furthermore, during the hot storage period, phase separation between rubber particles and the base bitumen could occur. Developing Recycled Tyre Rubber Modified Bitumen (RTR-MBs) with improved storage stability and reduced values of HTV could allow using this technology in standard asphalt plants, resulting in an environmental-friendly and cost-effective option of standard Polymer Modified Bitumen (PMBs). In this study, two different pre-treated and one straight ambient recycled rubbers were used to produce RTR-MBs. The first RTR was pre-treated by special oil and Warm Mix Additives (WMA) and the second was partly devulcanised. Also, two base binders were selected with large differences in mechanical properties in order to identify the effect of base binder. The high temperature viscosity was successfully reduced by using pre-treated RTR. The use of RTR together with Fischer–Tropsch wax (Sasobit®) in bitumen technology offered superior high in-service temperature properties and reduced value of HTV, and thus can be preferred option over styrene–butadiene–styrene (SBS) modification.

Item Type: Article
RIS ID: https://nottingham-repository.worktribe.com/output/749619
Additional Information: This is an Accepted Manuscript of an article published by Taylor & Francis in Road Materials and Pavement Design on 16 April 2015, available online: http://www.tandfonline.com/10.1080/14680629.2015.1030826
Keywords: recycled tyre rubber, de-vulcanised rubber, FT-wax, rutting resistance, rheological properties, high-temperature viscosity, modified bitumen
Schools/Departments: University of Nottingham, UK > Faculty of Engineering > Department of Civil Engineering
Identification Number: https://doi.org/10.1080/14680629.2015.1030826
Depositing User: Subhy, Ayad
Date Deposited: 09 May 2017 15:08
Last Modified: 04 May 2020 17:06
URI: https://eprints.nottingham.ac.uk/id/eprint/42687

Actions (Archive Staff Only)

Edit View Edit View