• Login
• Admin

Shalak, Mohamed (2022) Theoretical and experimental investigation of a Solar Free-Piston Stirling Engine (FPSE) using a flexible bellow for water pumping/power generation. PhD thesis, University of Nottingham.

Preview

PDF (Thesis - as examined) - Requires a PDF viewer such as GSview, Xpdf or Adobe Acrobat Reader Available under Licence Creative Commons Attribution. Download (5MB) | Preview

Abstract

Fossil fuels are the primary energy source globally and currently represent more than 80% of the overall energy consumption. Fossil fuels such as natural gas, oil and coal remain the principal fuels for supply and off-grid power generation in remote areas. Concerns over the negative environmental impact of greenhouse gases emission have shifted toward deploying and developing renewable and low carbon energy technologies. In the last decades, many sustainable and clean energy alternatives have been exploited to make energy and power generation clean and affordable to mitigate the negative impact of fossil fuels on the environment. The Stirling engine is considered one of the most promising solutions of sustainable power technologies to generate electricity from external heat sources.

This research develops the computer model of a free-piston Stirling engine (FPSE) prototype operated by a solar simulator for small-scale power generation. The mathematical model was based on solving the working fluid's mass, energy and momentum conservation equations in different engine components. The engine's performance was evaluated based on the other three models: Schmidt, Adiabatic and Simple analysis. It is found that Simple analysis gave the most accurate result because the model considers the heat losses of the Stirling cycle. This research also investigated a novel design of a solar Free-piston Stirling engine for power generation and water pumping, which can be used in remote world regions. The design incorporates flexible bellows or diaphragm working as a power piston and two pre-compressed springs to support the displacer. This mechanical arrangement of the moving components in the engine reduces mechanical friction and air leakage. The experimentally testable FPSE was carried out, including a linear electric generator to develop and validate the theoretical simulation model. It was demonstrated the engine could operate successfully at an input heat temperature of 300C°, at 1 bar pressure and a frequency of 10 Hz. Moreover, a novel design is added to the engine to convert the linear motion to rotary motion. Overall, the engine's measured power and efficiency are low, and more tests of increasing the pressure of the engine for more than 1 bar are required to obtain better performance.

Item Type:	Thesis (University of Nottingham only) (PhD)
Supervisors:	Boukhanouf, Rabah Calautit, John
Keywords:	Solar Free-Piston Stirling Engine, FPSE, Flexible bellow, Water pumping, Power generation
Subjects:	T Technology > TJ Mechanical engineering and machinery > TJ255 Heat engines. Turbines
Faculties/Schools:	UK Campuses > Faculty of Engineering > Built Environment
Item ID:	71589
Depositing User:	SHALAK, MOHAMED
Date Deposited:	13 Dec 2022 04:40
Last Modified:	13 Dec 2022 04:40
URI:	https://eprints.nottingham.ac.uk/id/eprint/71589

Actions (Archive Staff Only)

Edit View