• Login
• Admin

Abdul Shukor, Syaimak (2010) The development of a manufacturability analysis system for micro-milling. PhD thesis, University of Nottingham.

Afazov, Shukri (2009) Simulation of manufacturing processes and manufacturing chains using finite element techniques. PhD thesis, University of Nottingham.

Afshar, Saman (2016) Investigating product acquisition strategies in closed-loop supply chains. PhD thesis, University of Nottingham.

Agarwal, Deepa (2016) Impact of polymeric additives on the functionality of microfibrillar cellulose. PhD thesis, University of Nottingham.

Al-Rasby, Ahmed Nasser (1996) Strategic manufacturing effectiveness: an empirical analysis. PhD thesis, University of Nottingham.

Al-jumaili, Omar Saad salih (2018) Investigation of friction stir welding of aluminium alloy and aluminium matrix composites. PhD thesis, University of Nottingham.

Allen, Sam D. (2011) Algorithms and data structures for three-dimensional packing. PhD thesis, University of Nottingham.

Alogla, Ageel (2021) The impact of adopting Additive Manufacturing on responsive supply chain performance. PhD thesis, University of Nottingham.

Alyami, Jaber (2015) Estimating efficiency and productivity growth of the Grain Silos and Flour Mills Organisation in Saudi Arabia. PhD thesis, University of Nottingham.

Annarasa, Vinotharan (2021) Modelling the mechanical response of elastomers: the roles of the network, the filler and the deformation history. PhD thesis, University of Nottingham.

Antzoulatos, Nikolas (2017) Towards self-adaptable intelligent assembly systems. PhD thesis, University of Nottingham.

Araujo, Luiz J.P. (2019) Enhancing decision support for solutions of packing problem in additive manufacturing: features, datasets and experimental studies. PhD thesis, University of Nottingham.

Askari, Meisam (2017) Metamaterial fabrication using combined multiphoton polymerization and optical trapping. PhD thesis, University of Nottingham.

Basak, Shreeja (2023) The impact of process planning on cost and production losses in additive manufacturing. PhD thesis, University of Nottingham.

Baykasoğlu, Adil (1999) Multiple objective decision support framework for configuring, loading and reconfiguring manufacturing cells. PhD thesis, University of Nottingham.

Beltagui, Ahmad (2011) The role of design in product-service organisations. PhD thesis, University of Nottingham.

Bhuwal, Akash Singh (2023) Failure analysis and mechanical behaviors of metamaterials. PhD thesis, University of Nottingham.

Bin Azahari, Ahmad Azli (2020) Characterisation of weldability and metallurgical stability of dissimilar metal welds. PhD thesis, University of Nottingham.

Bisterov, Ivan (2023) Advancing electrochemical jet machining through process monitoring and control. PhD thesis, University of Nottingham.

Blake, Charlotte (2021) Additive manufacturing of mitral annuloplasty devices. PhD thesis, University of Nottingham.

Bointon, Patrick (2020) Mechanical design and dynamic performance characterisation for non-contact form measurement systems. PhD thesis, University of Nottingham.

Calla, Eklavya (2005) Cold gas spraying of copper and tin onto metallic and non metallic substrates. PhD thesis, University of Nottingham.

Camacho Arreguin, Josue Israel (2022) Design and modelling of a reconfigurable parallel kinematic machine with customisable leg layout for enhanced performance. PhD thesis, University of Nottingham.

Campbell, Robert Ian (1998) Using feature-based product modelling to integrate design and rapid prototyping. PhD thesis, University of Nottingham.

Campbell, T.D. (1975) Strains, deformations and buckling in very thin torispherical pressure vessel ends. PhD thesis, University of Nottingham.

Catalucci, Sofia (2021) Automated assessment of measurement performance in optical coordinate metrology. PhD thesis, University of Nottingham.

Chadha, Sunil (2021) Numerical modelling of suspension high velocity oxy fuel (S-HVOF) thermal spray. PhD thesis, University of Nottingham.

Chen, Changrong (2016) Fatigue life assessment of thermal cracked dies and moulds for remanufacturing. PhD thesis, University of Nottingham.

Chen, Siwen (2022) High speed in-process defect detection in metal additive manufacturing. MPhil thesis, University of Nottingham.

Clark, John William Gordon (2015) Investigating chemical and microstructural evolution at dissimilar metal welds. EngD thesis, University of Nottingham.

Daure, Jaimie (2016) An investigation into the tribology and corrosion barrier performance of thin multilayer PVD films. PhD thesis, University of Nottingham.

Del Guercio, Giuseppe (2023) Hot cracking elimination strategies in aluminium alloys fabricated by PBF-LB/M. PhD thesis, University of Nottingham.

Ding, Liang (2021) Surface texturing on dry-lubricated transmissions and power systems to deliver better performance and simplified systems in aerospace engineering. PhD thesis, University of Nottingham.

Ding, Yi (2009) Effects of elevated temperature exposure on the microstructural evolution of Ni(Cr)-Cr3C2 coated 304 stainless steel. PhD thesis, University of Nottingham.

Driva, Helen (1997) The role of performance measurement during product design & development in a manufacturing environment. PhD thesis, University of Nottingham.

Dryburgh, Paul (2022) Inspection of additively manufactured components by spatially resolved acoustic spectroscopy. EngD thesis, University of Nottingham.

Duong, Thai Ha (2015) Heuristics approaches for three-dimensional strip packing and multiple carrier transportation plans. PhD thesis, University of Nottingham.

Echeta, Ifeanyichukwu (2023) Analysis of defects in additively manufactured lattice structures. PhD thesis, University of Nottingham.

El-Nounu, AbdulRahman (2018) Redesign methodology for cost effective assembly of aerospace structures. EngD thesis, University of Nottingham.

Elmadih, Waiel (2020) Additively manufactured lattice structures for vibration attenuation. PhD thesis, University of Nottingham.

Er, Mahendrawathi (2004) Managing product variety in international supply chains. PhD thesis, University of Nottingham.

Eshtaya, Majd (2016) Towards sustainable production of renewable chemicals from lignin. PhD thesis, University of Nottingham.

Evangelista Barreiros, Maria Inês (2023) Formulation strategies for the 3D extrusion printing of tablets containing a poorly soluble drug. PhD thesis, University of Nottingham.

Everton, Sarah (2018) Ensuring the quality of components produced by metal additive manufacturing using laser generated ultrasound. EngD thesis, University of Nottingham.

Fan, Yu (2010) Mechanical properties of laser beam welded Ti6Al4V. PhD thesis, University of Nottingham.

Fanicchia, Francesco (2018) Investigation of combustion flame spray as in-situ repair technology for thermal barrier coatings. PhD thesis, University of Nottingham.

Farooq, Sami (2007) Manufacturing technology selection: a supply chain perspective. PhD thesis, University of Nottingham.

Ferguson, Karen Elizabeth (1999) The electrodeposition of zinc-manganese. PhD thesis, University of Nottingham.

Ferreira, Pedro (2011) An agent-based self-configuration methodology for modular assembly systems. PhD thesis, University of Nottingham.

Fisher, Oliver J. (2020) Intelligent resource use in process manufacturing. PhD thesis, University of Nottingham.

Garcia Hernandez, Alfonso C. (2019) Self–sealing hot isostatic pressing–diffusion bonding of titanium for near net shape manufacture. MPhil thesis, University of Nottingham.

Gasper, Alexander (2019) Spatter and powder evolution in laser powder bed fusion of Nickel-based superalloys. PhD thesis, University of Nottingham.

Gibbs, Albert Oswald (2023) Orientation control during 2D-3D composite preforming. PhD thesis, University of Nottingham.

Gilani, Negar (2023) Drop-on-demand metal additive manufacturing from droplet formation to 3D structures. PhD thesis, University of Nottingham.

Gomez Moreno, Carlos Alberto (2022) Applications of coherence scanning interferometry in additive manufacturing. PhD thesis, University of Nottingham.

Gomez Valdez, Carlos Rafael (2010) The impact of manufacturing flexibility on system performance: a simulation based approach. PhD thesis, University of Nottingham.

Grieve, David G. (1991) Computer simulation of rotary forging. PhD thesis, University of Nottingham.

Groenemeyer, Sven (2012) Novel approaches to cyclic job-shop problems with transportation. PhD thesis, University of Nottingham.

Groth, Jan-Hendrik (2023) The application of stochastic design strategies to primitive and complex shapes. PhD thesis, University of Nottingham.

Gullane, Alex (2023) Process design for high throughput Laser Powder Bed Fusion. PhD thesis, University of Nottingham.

Gupta, Alok (2023) Exploring property-structure-performance relationship for additive manufactured Ti-6Al-4V alloy through experimental studies. PhD thesis, University of Nottingham.

Hall, Neil Stewart (2017) An investigation into phosphoric iron production in Eastern England. PhD thesis, University of Nottingham.

Hasan, Ahmed Falh (2016) Modelling of tool wear and metal flow behaviour in friction stir welding (FSW). PhD thesis, University of Nottingham.

He, Yinfeng (2016) An investigation of inkjet printing of polycaprolactone based inks. PhD thesis, University of Nottingham.

Hirani, Hitendra J. (2005) Knowledge based requirements specification for reconfigurable assembly systems. PhD thesis, University of Nottingham.

Hollowood, Jacqueline (2011) Perception and performance: an evaluation of multimodal feedback for the assessment of curve shape differences. PhD thesis, University of Nottingham.

Hussain, Tanvir (2011) A study of bonding mechanisms and corrosion behaviour of cold sprayed coatings. PhD thesis, University of Nottingham.

Hussain, Tanweer (2012) Modelling and controlling variation propagation in mechanical assembly of high speed rotating machines. PhD thesis, University of Nottingham.

Iracheta-Cabrera, Omar Adrian (2017) A holistic inverse approach on depth-sensing indentation characterisation and its application for predicting residual stresses in multi-phase inertia friction welds. PhD thesis, University of Nottingham.

Jodeiri, Keyvan (2023) Development of 3D printed enzymatic biofuel cells for powering implantable biomedical devices. PhD thesis, University of Nottingham.

Julien, Denyse (1998) An investigation into the effectiveness of statistical process control techniques, with management data from a product development environment. PhD thesis, University of Nottingham.

Konta, Andrea Alice (2022) New multi-material formulations for vat-photopolymerisation and their application in manufacturing ocular implants. PhD thesis, University of Nottingham.

Leadbeater, G. (1983) The effect of shot peening on the initiation of fatigue cracks by fretting. PhD thesis, University of Nottingham.

Lehder, Eric Federico (2023) Experimentally supported computational method for the optimal design selection of 3D printed fracture healing implant geometries. PhD thesis, University of Nottingham.

Levadoux, Galatée P. (2019) In-situ monitoring of production of large composite structures using tool embedded capacitors. PhD thesis, University of Nottingham.

Li, Xiang (2017) Life cycle based decision support for sustainable automotive engineering and energy planning. PhD thesis, University of Nottingham.

Li, You (2021) Inkjet printing of thin film transistors. PhD thesis, University of Nottingham.

Liu, Yaan (2020) Additive manufacture of three dimensional metal-polymer nanocomposites through two-photon fabrication. PhD thesis, University of Nottingham.

Liu, Ying (2014) Multi-objective optimisation methods for minimising total weighted tardiness, electricity consumption and electricity cost in job shops through scheduling. PhD thesis, University of Nottingham.

Lohse, Niels. (2006) Towards an ontology framework for the integrated design of modular assembly systems. PhD thesis, University of Nottingham.

Lu, Yu (2021) Development of novel degradable pH-responsiveness polymers for potential applications in 3D printing. MRes thesis, University of Nottingham.

Lunn, Geoffrey David (2018) Wire flame sprayed aluminium coatings onto polymer and CFRP substrates. PhD thesis, University of Nottingham.

Luo, Renfan (2002) Fatigue of dented pipes. PhD thesis, University of Nottingham.

Mansour, Saeed (1988) A computer package for simulation and analysis of rotary forging. PhD thesis, University of Nottingham.

Marsh, Jonathan (2020) Numerical modelling of microwave plasma-assisted chemical vapour deposition reactors for diamond synthesis. PhD thesis, University of Nottingham.

Memon, Halar (2021) Research and development of polyurethane icephobic composite coatings. PhD thesis, University of Nottingham.

Mo, Fan (2024) Asset selection and optimisation for robotic assembly cell reconfiguration. PhD thesis, University of Nottingham.

Moran, Sean T. (2018) “An applied guide to process and plant design” and the epistemology of engineering. PhD thesis, University of Nottingham.

Neely, Andy (1993) Congruence and its role in manufacturing strategy: an audit of goals and systems. PhD thesis, University of Nottingham.

Newton, Lewis (2020) Development of methods for measuring and characterising the surface topography of additively manufactured parts. PhD thesis, University of Nottingham.

Ng, May Ling (2013) An emotional journey : from sensory attributes to packaging and back again! PhD thesis, University of Nottingham.

Njoku, Romanus Egwuonwu (2017) Open-cell porous aluminium for heat transfer applications. MPhil thesis, University of Nottingham.

Okafor, Obinna (2020) Mesoscale additively manufactured flow reactors for synthetic, crystallisation and biocatalytic applications. PhD thesis, University of Nottingham.

Overton, James (2017) 3-Dimensional alignment of micro components using liquid droplets. PhD thesis, University of Nottingham.

Oyelola, Olusola (2020) Machining of metal directed energy deposited components. PhD thesis, University of Nottingham.

Peng, Wenxuan (2022) Experimental and numerical investigations of deformation and fracture mechanisms in double-sided incremental forming. PhD thesis, University of Nottingham.

Pervan, David (2020) Additive manufacture with copper and silver nanoparticles. PhD thesis, University of Nottingham.

Pieris, Don (2022) Towards in-process inspection of additive manufacturing using laser ultrasonics. EngD thesis, University of Nottingham.

Popplewell, Keith (1980) Multi-product, multi-level product control system analysis. PhD thesis, University of Nottingham.

Pu, Jing (2021) Parametric analysis of 3D printing of continuous carbon fibre with polyether ether ketone matrix using the fused filament fabrication process. PhD thesis, University of Nottingham.

Pulsford, Jamie C H (2020) An investigation of cermet and composite HVOF thermal spray coatings for internal surfaces. EngD thesis, University of Nottingham.

Reeves, Philip E. (1998) Reducing the surface deviation of stereolithography components. PhD thesis, University of Nottingham.

Reyes-Luna, Juan Francisco (2023) Inkjet printing digital image generation and compensation for surface chemistry effects. PhD thesis, University of Nottingham.

Reynolds, William J. (2022) Predicting melt pool behaviour in LPBF through high fidelity modelling. PhD thesis, University of Nottingham.

Rowson, Matthew (2021) Understanding the evolution of superalloy microstructure during inertia friction welding using in-situ x-ray diffraction and cellular automata. PhD thesis, University of Nottingham.

Saeidi, Saman (2011) Microstructure, oxidation & mechanical properties of as-sprayed and annealed HVOF & VPS CoNiCrAIY coatings. PhD thesis, University of Nottingham.

Saldaeva, Elena (2010) Through thickness air permeability and thermal conductivity analysis for textile materials. PhD thesis, University of Nottingham.

Sanchez, Salomé (2022) Creep behaviour of Laser Powder Bed Fused alloy 718. PhD thesis, University of Nottingham.

Sangchoom, Wantana (2016) Fabrication of porous carbons and mesoporous silica materials for energy storage and environmental applications. PhD thesis, University of Nottingham.

Senin, Nicola (2018) Feature-based characterisation of surface topography. PhD thesis, University of Nottingham.

Sherburn, Martin (2007) Geometric and Mechanical Modelling of Textiles. PhD thesis, University of Nottingham.

Sime, Nathan (2016) Numerical modelling of chemical vapour deposition reactors. PhD thesis, University of Nottingham.

Smale, Daniel M. (2011) Towards an integrated framework for the configuration of modular micro assembly systems. PhD thesis, University of Nottingham.

Smith, Peter H. (2022) Magnetic assistance in laser powder directed energy deposition. PhD thesis, University of Nottingham.

Southon, Nicholas Edward (2020) In-process monitoring of powder bed fusion with fringe projection. PhD thesis, University of Nottingham.

Spirrett, Fiona (2021) Investigations into glass additive manufacturing by selective laser melting and directed energy deposition. PhD thesis, University of Nottingham.

Stevenson, Alicia (2018) A cost model of part consolidation for additive manufacturing. EngD thesis, University of Nottingham.

Strong, Christopher (2023) Design and development of a novel plant cuticle model using 3D printing. PhD thesis, University of Nottingham.

Sturgess, Craig (2018) Fully reactive 3D inkjet printing of polydimethylsiloxane and polyurethane. PhD thesis, University of Nottingham.

Subhy, Ayad Tareq (2017) Characterisation and development of rubberised bitumen and asphalt mixture based on performance-related requirements. PhD thesis, University of Nottingham.

Tang, Fangyan (2016) Cultural differences in product design between the UK and China. PhD thesis, University of Nottingham.

Tietje, Carsten (2009) Design for microassembly: a methodology for product design and process selection. PhD thesis, University of Nottingham.

Todhunter, Luke (2020) Surface topography analysis software validation. EngD thesis, University of Nottingham.

Tudor, James (2023) Automatic control of manufacturing variation propagation. PhD thesis, University of Nottingham.

Wang, Han (2024) Investigation of production planning for environmental sustainability improvement in polymer LPBF. PhD thesis, University of Nottingham.

Wang, Jie (2020) Nickel-based coatings and structures for hydrophobic/icephobic applications. PhD thesis, University of Nottingham.

Welsh, B.S. (1993) High speed deformation and break-up of shaped charge jets. PhD thesis, University of Nottingham.

Wong, Whee Yen (2015) Framework of Six Sigma implementation analysis on SMEs in Malaysia for information technology services, products and processes. PhD thesis, University of Nottingham.

Woods, Emma (2022) Investigating the use of two-photon polymerisation for the creation of gradient index optics. PhD thesis, University of Nottingham.

Xiao, Xueliang (2012) Modeling the structure-permeability relationship for woven fabrics. PhD thesis, University of Nottingham.

Yehia, Ziyad Khamis Mohammad (2020) The VI Nav cards: a holistic approach to supporting the design of navigation aids for the blind and visually impaired. PhD thesis, University of Nottingham.

Yu, Fei (2022) The prediction of wrinkle formation in non-crimp fabrics during double diaphragm forming. PhD thesis, University of Nottingham.

Zhao, Ge (2020) Processing of open-cell structures by additive manufacturing technique of metal and salt mixtures. MPhil thesis, University of Nottingham.

Zhu, Hui (2023) Analytical and experimental investigation of incremental sheet forming of thermoplastics. PhD thesis, University of Nottingham.

Zou, Zhiyi (2020) Refinement of the grain structure of selective laser melted Ti-6Al-4V via induction heat treatment. PhD thesis, University of Nottingham.

Özdemir, Seda (2017) An integrated model of supplier selection and inventory planning using fuzzy logic and multi-objective evolutionary algorithms. PhD thesis, University of Nottingham.