• Login
• Admin

2024

Amara, Fatima (2024) Control limitations of a cascaded H-bridge converter in solid-state substation applications. PhD thesis, University of Nottingham.

Niewiadomski, Karol (2024) Statistical analysis in electromagnetic compatibility. PhD thesis, University of Nottingham.

Wei, Shansong (2024) Future power electronics architectures for magnetron-based RF systems. PhD thesis, University of Nottingham.

2023

Abbas, Hayat (2023) Design and Construction of An Optomechanical Coupler For Quantum Optical Experiments. PhD thesis, University of Nottingham.

Alotaibi, Saud (2023) Investigation of advanced semiconductor materials and devices for solar cell applications. PhD thesis, University of Nottingham.

Altinozen, Ekrem (2023) Spatial warping techniques for unstructured transmission line modelling method. PhD thesis, University of Nottingham.

Barton, Luke (2023) Sb Doped CuMnAs for Antiferromagnetic Spintronics. PhD thesis, University of Nottingham.

Dey, Anubhab (2023) Van der Waals heterostructures based on graphene and 2D ferroelectric CuInP2S6. PhD thesis, University of Nottingham.

Halstead, M. J. (2023) Computational Study on Polarisation Behaviour of Functionalised Endohedral Metallofullerenes. PhD thesis, University of Nottingham.

Jalal, Bawar (2023) Real-time electromagnetic visualisation using augmented reality and accelerated models. PhD thesis, University of Nottingham.

Loschi, Hermes (2023) Modulation algorithms of power electronic converters for shaping of conducted interference. PhD thesis, University of Zielona Gora.

Pena Quintal, Angel Eduardo (2023) On low frequency conducted EMI: interference mitigation with focus on the DC switching harmonic in the time and frequency domains. PhD thesis, University of Nottingham.

Poole, S F (2023) New Characterisation Techniques for Thin Film Antiferromagnetic Materials. PhD thesis, University of Nottingham.

Tompkins, Christopher G (2023) Optical Methods of Imaging In-plane and Normal Load Distributions Between Contacting Bodies. PhD thesis, University of Nottingham.

Wang, Xin (2023) Optimized operational control for an electric power system on more electric aircraft. PhD thesis, University of Nottingham.

Xie, Shihong (2023) Van der Waals Heterostructures based on Two-dimensional Ferroelectric and Ferromagnetic Layers. PhD thesis, University of Nottingham.

2022

AL HUWAYZ, MARYAM (2022) Investigation of the electrical and optical properties of advanced semiconductors materials and devices. PhD thesis, University of Nottingham.

Birchall, Liesbeth (2022) Reactive inkjet of quantum dot-silicone composites. PhD thesis, University of Nottingham.

Donoso Merlet, Felipe Octavio (2022) Hybrid modular multilevel converter (MMC) applications under over-modulation. PhD thesis, University of Nottingham.

Gao, Xinning (2022) Model order reduction for electromagnetic design in power electronics. PhD thesis, University of Nottingham.

Gungordu, Baris (2022) Structural and fluidic investigation of piezoelectric synthetic jet actuators for performance enhancements. PhD thesis, University of Nottingham.

Harikumaran, Jayakrishnan (2022) Design of high reliability power converters for aerospace applications. PhD thesis, University of Nottingham.

Laterza, Marta (2022) Applications of perturbation theory to power electronic converters. PhD thesis, University of Nottingham.

Reimers, Sonka (2022) Antiferromagnetic domain structure in tetragonal CuMnAs films: A picturebook of domains, domain walls and everything in between. PhD thesis, University of Nottingham.

Spagnolo, Cosimo (2022) Analytical approach to electrical distribution systems for aircraft. PhD thesis, University of Nottingham.

Stratta, Andrea (2022) Heterogeneous integration of WBG devices and magnetic components: manufacturing and design optimisation. PhD thesis, University of Nottingham.

Wen, Zhuang (2022) Advanced control strategies for partially levitating multi-sector permanent magnet synchronous machines. PhD thesis, University of Nottingham.

Wrigley, James (2022) Surface Morphology of Epitaxially Grown 2D Van der Waals Heterostructures. PhD thesis, University of Nottingham.

2021

Guo, Feng (2021) Performance improvement of three-level neutral-point-clamped electric-starter-generator system for more electric aircraft. PhD thesis, University of Nottingham.

Li, Kang (2021) Optimal H2 control design of active front-end integrating grid model identification. PhD thesis, University of Nottingham.

Roy, Syamashree (2021) The magnetic properties of epitaxial Fe100-xGax thin films: the role of Gallium composition and film thickness. PhD thesis, University of Nottingham.

Wang, Cheng (2021) Power quality improvement of electrical power systems within more electric aircraft. PhD thesis, University of Nottingham.

2020

Alkhamisi, Manal (2020) The morphology and optical properties of organic molecules and heterostructures. PhD thesis, University of Nottingham.

Baharuddin, Mohd Hafiz (2020) Measurement and characterisation of stochastic fields. PhD thesis, University of Nottingham.

Chen, Linglin (2020) Control of dual active bridge for DC distribution systems on more electric aircrafts. PhD thesis, University of Nottingham.

Madenoor Ramapriya, Deepthee (2020) Mathematical modelling of wireless chip to chip communication within enclosures. PhD thesis, University of Nottingham.

Moss, James L. (2020) Beam steering optical switches in AlGaAs via the Burstein-Moss effect. PhD thesis, University of Nottingham.

Olanrewaju, Olufisayo Abimbola (2020) Multidomain modelling of multichip SiC power modules. PhD thesis, University of Nottingham.

2019

Al Mashary, Faisal (2019) Investigation of the Electrical Properties of Transparent Conductive Oxides Thin Semiconductor Films Grown by Various Techniques. PhD thesis, University of Nottingham.

Albalawi, Hind Mohammed (2019) Investigation of the optical and electrical properties of dilute nitride compound semiconductors based on GaP. PhD thesis, University of Nottingham.

Bhuiyan, Mahabub Alam (2019) The Novel Two-Dimensional van der Waals Crystal InSe and its Magnetic Doping. PhD thesis, University of Nottingham.

Dély, Alexandre (2019) Computational strategies for impedance boundary condition integral equations in frequency and time domains. PhD thesis, University of Nottingham.

Eftekhar Khansari, Tiva (2019) Research into the optimisation of spectral quality to improve plant growth and development towards LED lighting and closed loop control for horticulture. PhD thesis, University of Nottingham.

Gianluca, De Bonis (2019) Development of a smart thyristor valve for HVDC transmission. PhD thesis, University of Nottingham.

Levadoux, Galatée P. (2019) In-situ monitoring of production of large composite structures using tool embedded capacitors. PhD thesis, University of Nottingham.

Lim, Li Li (2019) An optimised field programmable gate array (FPGA) Jacobian logarithm architecture for turbo codes and soft bit demodulation. PhD thesis, University of Nottingham.

Nasir, Usman (2019) A modular isolated AC/AC matrix converter. PhD thesis, University of Nottingham.

Zhang, Zhe (2019) Silent switching: EMI suppression without conventional EMI filters. EngD thesis, University of Nottingham.

Zhang, Zhewen (2019) Modelling wire problems using the unstructured transmission line modelling method. PhD thesis, University of Nottingham.

2018

Chong, Jen Haw (2018) Modelling of subcooled flow boiling in a rectangular micro-channel heat sink. PhD thesis, University of Nottingham.

Ezeigwe, Ejikeme Raphael (2018) Green synthesis of graphene-metal oxides composites as a promising electrode for energy storage. PhD thesis, University of Nottingham.

Fayyaz, Asad (2018) Performance and robustness characterisation of SiC power MOSFETs. PhD thesis, University of Nottingham.

Goh, Chin Kung (2018) Thermal management of an advanced aircraft actuation system. MPhil thesis, University of Nottingham.

Hernandez Ledezma, Francisco Ulises (2018) Optical fibre sensors for novel medical devices during anaesthesia. PhD thesis, University of Nottingham.

Ledesma Fernandez, Javier (2018) Jetting of multiple functional materials by additive manufacturing. PhD thesis, University of Nottingham.

Low, Sze Shin (2018) Graphene/zinc oxide nanocomposite : a versatile platform for electrochemical-based genosensor. PhD thesis, University of Nottingham.

Saeed, Rasha (2018) Design and characterisation of a high energy-density inductor. PhD thesis, University of Nottingham.

Shih Chieh, Lai (2018) A multiphase interleaved boost converter with coupled inductor for fuel cell APU applications. PhD thesis, University of Nottingham.

Song, Wenping (2018) An investigation of MMC based DC/DC converter for HVDC grids. PhD thesis, University of Nottingham.

2017

Abodhir, Nourdeen Abdulslam (2017) Resonant power converter control for industrial magnetron. PhD thesis, University of Nottingham.

Abubakar, Hadiza Ahmad (2017) Investigating ageing behaviours in supercapacitor (cells and modules) using EEC (electrical equivalent circuit) models. PhD thesis, University of Nottingham.

Chowdhury, MD Shajjad (2017) A multilevel converter with a floating bridge for open-ended winding motor drive application. PhD thesis, University of Nottingham.

Cousins, Richard (2017) Fabrication and measurement of nanomechanical resonators. PhD thesis, University of Nottingham.

Hatem, Firas Odai (2017) Bipolar resistive switching of bi-layered Pt/Ta2O5/TaOx/Pt RRAM : physics-based modelling, circuit design and testing. PhD thesis, University of Nottingham.

Ho, Patrick W. C. (2017) Non-volatile FPGA architecture using resistive switching devices. PhD thesis, University of Nottingham Malaysia Campus (UNMC).

Jankovic, Marija (2017) High power modular converters for grid interface applications. PhD thesis, University of Nottingham.

Papadopoulos, Savvas (2017) A hybrid power converter with enhanced switching ripple cancellation. PhD thesis, University of Nottingham.

2016

Ageeva, Victoria (2016) Endoscopic cheap optical transducers (CHOTs) for on-wing ultrasonic inspection. PhD thesis, University of Nottingham.

Arjmand, Elaheh (2016) On-line quality monitoring and lifetime prediction of thick Al wire bonds using signals obtained from ultrasonic generator. PhD thesis, University of Nottingham.

Cossutta, Matteo (2016) Life cycle analysis of graphene in a supercapacitor application. PhD thesis, University of Nottingham.

Eleffendi, Mohd Amir (2016) In-service estimation of state of health of power modules. PhD thesis, University of Nottingham.

Hossain, Syed Tauseef (2016) Thermoelastic damping and support loss in MEMS ring resonators. PhD thesis, University of Nottingham.

Ivry, Preye Milton (2016) Predicting stochastic harmonics of multiple converters in a power system (microgrid). PhD thesis, University of Nottingham.

Ngo Quang Bao, Loc (2016) Investigations of embroidery antennas on polymer substrate. MPhil thesis, University of Nottingham.

Nik Zulkepeli, Nik Ahmad Akram (2016) Real-time unsupervised incremental support vector machine for oil and gas pipeline NDT system. PhD thesis, University of Nottingham.

Obiekezie, Chijioke S. (2016) Extended equivalent dipole model for radiated emissions. PhD thesis, University of Nottingham.

Ryding, Joseph (2016) Assessing new methods for measuring forest understorey vegetation using terrestrial laser scanning. PhD thesis, University of Nottingham.

Wang, Yun (2016) Characterization and reliability of Ag nanoparticle sintered joint for power electronics modules. PhD thesis, University of Nottingham.

2015

Ajina, Ahmida (2015) Statistical optimization of supercapacitor pilot plant manufacturing and process scale-up. PhD thesis, University of Nottingham.

Choi, Rebecca (2015) Design and characterisation of a label free evanescent waveguide microscope. MPhil thesis, University of Nottingham.

Hind, David Martin (2015) Current derivative estimation for sensorless motor drives. PhD thesis, University of Nottingham.

Howells, Bryn (2015) Studies of spin-orbit coupling phenomena in magnetic semiconductors. PhD thesis, University of Nottingham.

Mohammad Naim, Nur Nafisah (2015) Modelling the ageing behaviour of supercapacitors using electrochemical impedance spectroscopy for dynamic applications. PhD thesis, University of Nottingham.

Sadaghiani, Mohammad Hossein/Mr. (2015) New method for mathematical modelling of human visual speech. PhD thesis, University of Nottingham.

Safari, Saeed (2015) Impact of silicon carbide device technologies on matrix converter design and performance. PhD thesis, University of Nottingham.

Shao, Shuai (2015) The application of sliding mode observers to fault detection and isolation for multilevel converters. PhD thesis, University of Nottingham.

Solomon, Adane Kassa (2015) Advanced packaging and integration solutions for enhanced performance power convertors. PhD thesis, University of Nottingham.

Spencer, G. S. (2015) EEG-fMRI: novel methods for gradient artefact correction. PhD thesis, University of Nottingham.

Yaqub, Imran (2015) Investigation into stable failure to short circuit in IGBT power modules. PhD thesis, University of Nottingham.

2014

Chia, Yen Yee (2014) Integrating supercapacitors into a hybrid energy system to reduce overall costs using the genetic algorithm (GA) and support vector machine (SVM). PhD thesis, University of Nottingham.

Effah, Francis Boafo (2014) Three-level Z-source hybrid direct AC-AC power converter topology. PhD thesis, University of Nottingham.

Kumar, Varindra (2014) I/O port macromodelling. PhD thesis, University of Nottingham.

Patel, Rikesh Ramesh (2014) Ultrastable heterodyne interferometry using a modulated light camera. PhD thesis, University of Nottingham.

Powell, Ross E L (2014) Optical studies of cubic III-nitride structures. PhD thesis, University of Nottingham.

Shattock, Nicholas (2014) High frequency-link cycloconverters for medium voltage grid connection. PhD thesis, University of Nottingham.

Tarisciotti, Luca (2014) Model predictive control for advanced multilevel power converters in smart-grid applications. PhD thesis, University of Nottingham.

2013

Ainslie-Malik, Gregory R. (2013) Mathematical analysis of PWM processes. PhD thesis, University of Nottingham.

Amankwah, Emmanuel K. (2013) A parallel hybrid modular multilevel converter for high voltage DC applications. PhD thesis, University of Nottingham.

Kulsangcharoen, Ponggorn (2013) Characterization and emulation of a new supercapacitor-type energy storage device. PhD thesis, University of Nottingham.

Othman, Mohd Azlishah (2013) Sub-Terahertz: generation and detection. PhD thesis, University of Nottingham.

Patel, Rupesh (2013) Modelling analysis and optimisation of cantilever piezoelectric energy harvesters. PhD thesis, University of Nottingham.

Teo, Yu Xian (2013) Modelling of interconnects including coaxial cables and multiconductor lines. PhD thesis, University of Nottingham.

Vongurai, Rawin (2013) Development of digital filtering techniques in three-dimensional TLM models. PhD thesis, University of Nottingham.

Yang, Li (2013) A damage-based time-domain wear-out model for wire bond interconnects in power electronic modules. PhD thesis, University of Nottingham.

Zhu, Zhongdao (2013) Modeling and optimization of microwave ring resonator filters using CST software. MSc(Res) thesis, University of Nottingham.

2012

Degano, Marco (2012) EMI filter design for matrix converters in airspace applications. PhD thesis, University of Nottingham.

Kirton, Peter (2012) Fluctuations and noise in nanoelectrical and nanomechanical systems. PhD thesis, University of Nottingham.

Skuriat, Robert (2012) Direct jet impingement cooling of power electronics. PhD thesis, University of Nottingham.

2011

Al-Ahmadi, Noorah Ahmed (2011) Investigation of the electrical properties of III-V semiconductor doped with Mn. PhD thesis, University of Nottingham.

Almaleki, Masoud (2011) Sliding mode observation of capacitor voltage in multilevel power converters. PhD thesis, University of Nottingham.

Kumar, Dinesh (2011) A new multi-motor drive system based on two-stage direct power converter. PhD thesis, University of Nottingham.

Lavopa, Elisabetta (2011) A novel control technique for active shunt power filters for aircraft applications. PhD thesis, University of Nottingham.

Liu, Jun yi (2011) High performance active filtering solutions for modern aircraft power network. PhD thesis, University of Nottingham.

Prociów, Paweł (2011) Mobile psychiatry: Personalised Ambient Monitoring for the mentally ill. PhD thesis, University of Nottingham.

Ridgway, Leah M. (2011) Magneto-dieletric properties of bismuth substituted barium hexaferrite. PhD thesis, University of Nottingham.

Russell, James Christopher (2011) Supramolecular network formation from solution-based deposition techniques. PhD thesis, University of Nottingham.

Tighe, Christopher James Frederick (2011) Thermal management of solid state power switches. PhD thesis, University of Nottingham.

Xiao, Li (2011) An investigation of dielectric tunable materials for microwave tunable devices. PhD thesis, University of Nottingham.

2010

Chang, Chiung-Wen (2010) Transnational production of Taiwanese integrated circuit industry in China. PhD thesis, University of Nottingham.

Scott, Ian (2010) Developments in time-reversal of electromagnetic fields using the transmission-line modelling method. PhD thesis, University of Nottingham.

Tong, Xin (2010) Simplified equivalent modelling of electromagnetic emissions from printed circuit boards. PhD thesis, University of Nottingham.

Zainal, Norzaini Binti (2010) Study of cubic III-V nitrides for device applications. PhD thesis, University of Nottingham.

2009

Freeman, Adam Alexander (2009) Magnetic X-ray spectroscopy studies of dilute magnetic semiconductors. PhD thesis, University of Nottingham.

Watson, Alan James (2009) Selective harmonic elimination methods for a cascaded H-bridge converter. PhD thesis, University of Nottingham.

Xu, Tianning (2009) New hybrid cycloconverters: an evaluation of their performance. PhD thesis, University of Nottingham.

2008

Lopez Arevalo, Saul (2008) Matrix converter for frequency changing power supply applications. PhD thesis, University of Nottingham.

2007

Li, Mengxiong (2007) 5 GHz Optical Front End in 0.35um CMOS. PhD thesis, University of Nottingham.

2006

Biwojno, Konrad P. (2006) Embedding of fine features in multi-scale electromagnetic models. PhD thesis, University of Nottingham.

Han, Yisong (2006) Microstructural characterisation of GaMnN ferromagnetic semiconductors grown on (001) oriented GaAs substrates by plasma assisted molecular beam epitaxy. PhD thesis, University of Nottingham.

2002

Palethorpe, Ben (2002) A novel system impedance measurement for power system analysis and improvement in power quality. PhD thesis, University of Nottingham.

2001

Teske, Nikolas (2001) Sensorless position control of induction machines using high frequency signal injection. PhD thesis, University of Nottingham.

1999

Butt, David (1999) An investigation of harmonic correction techniques using active filtering. PhD thesis, University of Nottingham.

1997

Krogemann, Markus (1997) The parallel resonant DC link inverter: a soft-switching inverter topology with PWM capability. PhD thesis, University of Nottingham.

1996

Evans, Hywel F.J. (1996) Neural network approach to the classification of urban images. PhD thesis, University of Nottingham.

1995

Harrison, Andrew (1995) ASIC based recorders of electrophysiological signals. PhD thesis, University of Nottingham.

1994

Craven, Michael P. (1994) Inter-chip communications in an analogue neural network utilising frequency division multiplexing. PhD thesis, University of Nottingham.

Murray, Bryan Gerrard (1994) Low frequency impedance and structural properties of high temperature superconducting YBa2Cu3Ox thin films. PhD thesis, University of Nottingham.

1993

Duffy, Alistair Paul (1993) Coupling of electromagnetic waves into wires: experiments and simulations. PhD thesis, University of Nottingham.

Steenson, David Paul (1993) The high-frequency application of double-barrier resonant tunnelling diodes. PhD thesis, University of Nottingham.

1990

Daemi, M.F. (1990) Information theory and pattern recognition. PhD thesis, University of Nottingham.

1989

Petheram, R.J. (1989) Automatic pattern recognition. PhD thesis, University of Nottingham.

1984

Belghoraf, A. (1984) Analysis of the tapered waveguide. PhD thesis, University of Nottingham.

1975

Akhtarzad, Sina (1975) Analysis of lossy microwave structures and microstrip resonators by the TLM method. PhD thesis, University of Nottingham.