• Login
• Admin

2024

Banda, Tiyamike (2024) Condition monitoring of tool performance using a machine learning-based on-machine vision system during face milling of Inconel 718. PhD thesis, University of Nottingham.

Bowling, William (2024) Experimental studies of ammonia co-fuelled combustion for future internal combustion engines. PhD thesis, University of Nottingham.

Metwalli, Khaled Mohamed (2024) Fabrication and characterizations of additively manufactured PVDF-HFP composites for potential force sensing applications. MPhil thesis, University of Nottingham.

Shah, Shoaib (2024) Developing a suite of online analysis tools for monitoring combustion efficiency in stoker boilers. EngD thesis, University of Nottingham.

Sriratanasak, Natthapol (2024) A multimodal miniaturised soft robot for accessing remote areas by passive-flight and wall-climbing. PhD thesis, University of Nottingham.

Wang, Xi (2024) Multi-modal thin soft robots for narrow space locomotion. PhD thesis, University of Nottingham.

Zandie, Mohammad (2024) Investigating the thermophysical properties and ignition behaviour in CI engines of cost-effective gasoline-palm biodiesel-diesel blends. PhD thesis, University of Nottingham.

2023

Ahmed, Nuhaize (2023) Formation mechanisms and performance of electrical discharge coatings. PhD thesis, University of Nottingham.

Arifin, Davin (2023) Using electrostatic nonlinearities to enhance the performance of ring-based Coriolis vibratory gyroscopes. PhD thesis, University of Nottingham.

Bisterov, Ivan (2023) Advancing electrochemical jet machining through process monitoring and control. PhD thesis, University of Nottingham.

Choo, Edwin Jia Chiet (2023) Development of a new n-dodecane-n-butanol-PAH reduced mechanism and the applications under diesel spray combustion. PhD thesis, University of Nottingham.

Crowson, Zakhary (2023) Multiscale Methods for the Flow During Grinding. PhD thesis, University of Nottingham.

Hussaini, Habibu (2023) Control of electrical systems using artificial intelligence for more electric aircraft applications. PhD thesis, University of Nottingham.

Kow, Yu Yang (2023) Development and characterisation of thermal responsive shape memory natural rubber. PhD thesis, University of Nottingham.

Laolu-Balogun, Emmanuel (2023) The effect of fretting conditions on the lifetime of aero-engine dry film lubricants systems. PhD thesis, University of Nottingham.

Ramli, Roslim (2023) Specialty natural rubber latex and latex foam products made therefrom. PhD thesis, University of Nottingham.

Thompson, Matthew (2023) Geometrical modelling of braided textiles. PhD thesis, University of Nottingham.

Yong, Hsin Nam Ernest (2023) Development of collagen functionalized thermally responsive poly(N-isopropylacrylamide) electrospun nanofibers scaffold potentially as a 3D cell culture platform for rat amniotic fluid stem cells. PhD thesis, University of Nottingham.

Zhang, Shuai (2023) Thermal transport in porous composite phase change materials. PhD thesis, University of Nottingham.

Zhao, Xuelei (2023) Investigations into Two New Variants of the Hybrid Incremental Sheet Forming Processes. PhD thesis, University of Nottingham.

Zuo, Jiawei (2023) Numerical investigation of heat transfer of a multi-layered microchannel heat sink with tapered channel. PhD thesis, University of Nottingham.

Zwalnan, Selfa Johnson (2023) An open-loop photovoltaic-solar-thermal evacuated tube energy system for health clinics in Nigeria. PhD thesis, University of Nottingham.

2022

Bugaje, Bilal (2022) Development of a system-dynamics-based methodology for comprehensive community energy planning. PhD thesis, University of Nottingham.

Chin, Kar Mun (2022) Controller design of a robotic orthosis using sinusoidal-input describing function model. PhD thesis, University of Nottingham.

SÉLO, Richard Roger Joachim (2022) Thermal properties of lattice structures by laser powder bed fusion for aerospace systems. PhD thesis, University of Nottingham.

Wang, Kunpeng (2022) A modular co-simulation approach for urban energy systems. PhD thesis, University of Nottingham.

2021

Adams, Marcus J. (2021) Design and operation of a metal hydride reactor within a thermochemical energy store for use in concentrated solar power. PhD thesis, University of Nottingham.

Apostolopoulou, Athanasia (2021) Parametric Study of different Levels of Detail in buildings for the estimation of Annual Heating Demand: A case study in London, UK. MRes thesis, University of Nottingham.

Arshad, Adeel (2021) Assessment of nanomaterials in enhancing the thermophysical properties of phase change materials for thermal management. PhD thesis, University of Nottingham.

Dong, Zhuang (2021) Design, analysis and performance evaluation of inerter-based linear and nonlinear vibration suppression systems. PhD thesis, University of Nottingham.

Godson, Ikhazuangbe Ivbuobe (2021) Multibody dynamic analysis of lightning protection systems for modern wind turbines. PhD thesis, University of Nottingham.

Hao, Siqi (2021) Recycling of carbon fibre via pyrolysis technologies. PhD thesis, University of Nottingham.

He, Lizhe (2021) Additive manufacturing of phosphate glass / polylactic acid composites for biomedical application. PhD thesis, University of Nottingham.

Kang, Hang (2021) Study on transport characteristics of nanofluid as a cooling medium for vehicle engine. PhD thesis, University of Nottingham.

Lim, Han Leong (2021) Gait trajectory prediction via extreme learning machine. MPhil thesis, University of Nottingham.

Liu, Lu (2021) Fundamental study of shear controllable synthesis of fine particles using taylor-couette flow reactor. PhD thesis, University of Nottingham.

Liu, Ze-Yu (2021) Investigation of thermal properties of citric acid modified magnetic nanofluids and distributions of drops deposition patterns affected by thermal strategies. PhD thesis, University of Nottingham.

Raimondi, Luca (2021) Towards the understanding of the transient behaviour and sources of variability on the process outcomes in inertia friction welding. PhD thesis, University of Nottingham.

Smith, Thomas Anthony (2021) Optimised task allocation using dynamic production data in human-robot teams. PhD thesis, University of Nottingham.

Werner, Thomas C. (2021) Investigation of novel analytical tools and experimental methods for the development of intermediate temperature heat pipes. EngD thesis, University of Nottingham.

Xue, Chenyang (2021) Fluid dynamics of controllable synthesis of micro-fine powder particles using Taylor-Couette flow reactors. PhD thesis, University of Nottingham.

2020

Al-Abedy, Hiydar Kireem Musraa (2020) Dislocation Density-Based Finite Element Models for Viscoplasticity and Creep of High-Temperature Materials. PhD thesis, University of Nottingham.

Chen, Yiyi (2020) Novel application of phase change in thermal management of power electronics. PhD thesis, University of Nottingham.

DAI, WEI (2020) Vibration transmission and power flow in nonlinear smooth and non-smooth dynamical systems. PhD thesis, University of Nottingham.

Hassan, Ali Jameel (2020) Laminated composites of continuous steered fibres along curved paths: characterisation and optimisation. PhD thesis, University of Nottingham.

Hee, Jee Loong (2020) Experimental and computational investigation into oil shedding from an aeroengine ball bearing. PhD thesis, University of Nottingham.

Kaluarachchi, Malaka Miyuranga (2020) Development of underactuated tendon driven manipulator incorporated with energy saving bistable electromagnetic coupling mechanism. PhD thesis, University of Nottingham.

Karim, Shah (2020) Real-time target alignment system for high-power laser operations using a hybrid mechanism. PhD thesis, University of Nottingham.

Lian, Zheng (2020) Synthesis of microparticles by microfluidic emulsification for water treatment. PhD thesis, University of Nottingham.

Madonna, Vincenzo (2020) Physics of failure as a technology enabler for electrical machines in transportation: reliability-oriented design of low voltage insulation systems. PhD thesis, University of Nottingham.

Manoharan, Manoorathy (2020) Optimisation studies for wind power generation in Malaysia. PhD thesis, University of Nottingham.

Monsalvete Alvarez de Uribarri, Pilar (2020) A multiscale framework for predicting distributed renewable thermal energy integration. PhD thesis, University of Nottingham.

Roy, Charlotte (2020) The synthesis of orthoesters and their role as delivery systems for lubricant additives. PhD thesis, University of Nottingham.

Tan, Jing Yang (2020) Development of a conceptual model for the ultra-fine particulate matter processes in gasoline direct injection engines using integrated CFD-chemical kinetic modelling. PhD thesis, University of Nottingham.

2019

Alnuaimi, Ahmed (2019) A novel heat driven trigeneration system. PhD thesis, University of Nottingham.

Atiyah, Hasanain Kareem (2019) Using black PMMA to investigate losses in fibre laser cutting. PhD thesis, University of Nottingham.

Chang, Tai Kiang (2019) Fusion of low-cost and light-weight sensor system for mobile flexible manipulator. PhD thesis, University of Nottingham.

Craig, Oliver (2019) Conformable fixture systems with flexure pins for improved workpiece holding. PhD thesis, University of Nottingham.

Goh, Jenn Hsen (2019) Performance mapping of a two-stage travelling wave thermoacoustic engine for heat recovery. PhD thesis, University of Nottingham.

Kantharaj, Bharath (2019) An investigation of compressed air energy storage methods. PhD thesis, University of Nottingham.

Mohammed, Hayder I. (2019) Numerical and experimental investigation of boiling nanofluids in vapour absorption refrigeration. PhD thesis, University of Nottingham.

Ochieng, F.X. (2019) 3-tiered structural health monitoring framework for wind turbine blades and masts based on portable ground-based real aperture radar damage condition metrics. PhD thesis, University of Nottingham.

Olule, Lillian Joyce Among (2019) Metamaterial rectenna based RF energy harvester. PhD thesis, University of Nottingham.

Taha, Samah Abdelseed (2019) Development of an improved Scott-Russell compliant spatial nano-positioning stage based on work-enrgy method. PhD thesis, University of Nottingham.

Walker, David (2019) Advanced steam measurement techniques: a study of how electrical capacitance measurements are affected by the spatial positioning of water within wet steam. EngD thesis, University of Nottingham.

Wei, Yixuan (2019) Data-driven approaches for analysis of building energy consumption and indoor occupancy behavior. PhD thesis, University of Nottingham.

Xu, Dong-dong (2019) Machinability and surface integrity investigation of Ni-based aerospace superalloys based on energy thresholds investigation and innovative pendulum-based machining. PhD thesis, University of Nottingham.

2018

Mansoor, Yousuf Ali (2018) The effect of oil feed pressure on friction and cavitation in plain bearings. PhD thesis, University of Nottingham.

Naylor, Sophie (2018) Managing the uncertainty of occupant behaviour for building energy evaluation and management. PhD thesis, University of Nottingham.

Nie, Yi (2018) Advanced analysis and lightweight design of annular extrusion dies. PhD thesis, University of Nottingham.

Ramadan Mohamed, Elamin Awad (2018) A novel high capacity space efficient heat storage system for domestic application. PhD thesis, University of Nottingham.

Spampinato, Alessio (2018) Dressing tools with controlled abrasive grain population for grinding aerospace materials. PhD thesis, University of Nottingham.

Speidel, Alistair (2018) Novel surface generation and characterisation by electrochemical jet processing. PhD thesis, University of Nottingham.

Sumner, Aaran (2018) New production methods for salient pole rotor manufacture. EngD thesis, University of Nottingham.

Zhang, Xiangzhi (2018) The application of entransy theory in heat transfer optimization of heat exchanger networks and multi-stage latent heat storage systems. MRes thesis, University of Nottingham.

Zhou, Yuchen (2018) On modelling and experimentation of planar grinding using abrasive pads with grits of defined geometries and distributions for enabling controlled surface texture. PhD thesis, University of Nottingham.

2017

De Simon, Lia (2017) New mathematical approaches to the quantification of uncertainty affecting the measurement of U-value. PhD thesis, University of Nottingham.

Fu, Rong (2017) An investigation of magnetic nanofluids for various thermal applications. PhD thesis, University of Nottingham.

Ghozzi, Salem Saleh (2017) Experimental investigation of a Diaphragm FPSE design using a novel edge welded bellows-displacer assembly. PhD thesis, University of Nottingham.

Idinyang, Solomon (2017) Automated liquid handling systems for microfluidic applications. PhD thesis, University of Nottingham.

Luo, Xi (2017) Motion estimation of a flexible robotic manipulator with vibration and vision sensing. PhD thesis, University of Nottingham.

Mohammed, Shara Kamal (2017) Gas-high viscosity oil flow in vertical large diameter pipes. PhD thesis, University of Nottingham.

Ong, Jiun Cai (2017) Development of Lagrangian soot tracking method for the study of soot morphology in diesel spray combustion. PhD thesis, University of Nottingham.

Onyemeh, Ngozi C. (2017) Impact of employee psychological empowerment, process and equipment on operational service quality in the oilfield service industry. PhD thesis, University of Nottingham.

Rasheed, Abdul Khaliq (2017) Heat transfer, tribology and performance of graphene nanolubricants in an IC engine. PhD thesis, University of Nottingham.

Sancho Tomás, Ana (2017) Integrated modelling of electrical energy systems for the study of residential demand response strategies. PhD thesis, University of Nottingham.

Sher, Farooq (2017) Design and operation of a 20 kWth fluidised bed combustor for biomass oxy-fuel combustion. PhD thesis, University of Nottingham.

Yeboah, Siegfried Kwame (2017) An integrated packed bed-oscillating heat pipe system for energy efficient isothermal adsorption processes. PhD thesis, University of Nottingham.

Zhang, Le-Le (2017) Increasing the road safety of e-bike: design of protective shells based on stability criteria. PhD thesis, University of Nottingham.

2016

Al Owaisi, S.S. (2016) Development of an improved structural integrity assessment methodology for pressurised pipes containing defects. PhD thesis, University of Nottingham.

Barman, Kanika (2016) Development of dry film lubricants for highly loaded contacts. PhD thesis, University of Nottingham.

Cheng, Xinwei (2016) Development of reduced reaction kinetics and fuel physical properties models for in-cylinder simulation of biodiesel combustion. PhD thesis, University of Nottingham.

Colley, James Alexander (2016) Making sense of the measurement, feedback and control of energy. PhD thesis, University of Nottingham.

Islam, Md Rezaul (2016) A floating liner facility and studies of friction at a reciprocating piston-cylinder wall interface. PhD thesis, University of Nottingham.

Johnstone, Alex (2016) Microfluidic systems for neuronal cell culture. PhD thesis, University of Nottingham.

Khoo, David Wee Yang (2016) Losses in the regenerator and the critical sections of a travelling wave thermoacoustic engine. PhD thesis, University of Nottingham.

Lozano Torrubia, Pablo (2016) Stochastic modelling of abrasive waterjet controlled-depth machining. PhD thesis, University of Nottingham.

Mat Wajid, Norhayati (2016) Investigation of a novel thermochemical heat storage systems for building applications. PhD thesis, University of Nottingham.

Palmer, David (2016) Control of navigation and feeding actions of a continuum arm for in-situ repair. PhD thesis, University of Nottingham.

Poon, Hiew Mun (2016) Development of integrated chemical kinetic mechanism reduction scheme for diesel and biodiesel fuel surrogates for multi-dimensional CFD applications. PhD thesis, University of Nottingham.

Shaw, Katherine (2016) Novel anion-bound borates as lubricant additives. PhD thesis, University of Nottingham.

Thoo, Wei Jet (2016) A study of the ignition delay characteristics of combustion in a compression ignition engine operating on blended mixtures of diesel and gasoline. PhD thesis, University of Nottingham.

2015

Buker, Mahmut Sami (2015) Building integrated solar thermal collectors for heating & cooling applications. PhD thesis, University of Nottingham.

Wee, David Shuon Tzern (2015) PIV investigation of acoustic transmission through curved duct bends for the optimisation of thermoacoustic systems. PhD thesis, University of Nottingham.

Woolhead, Simon (2015) Piston control for an Integral Compression Wind Turbine. PhD thesis, University of Nottingham.

2014

Hashemzadeh, Majid (2014) Investigations into fibre laser cutting. PhD thesis, University of Nottingham.

Naghiyev, Eldar (2014) Device-free localisation in the context of domestic energy saving control methods. PhD thesis, University of Nottingham.

Parra Mendoza, David (2014) Optimum community energy storage for end user applications. PhD thesis, University of Nottingham.

Romlie, Mohd Fakhizan (2014) Impact of energy storage on the stability and transmission efficiency of a remote grid. PhD thesis, University of Nottingham.

Rouse, James Paul (2014) Computational component analysis techniques for high temperature power plant applications. PhD thesis, University of Nottingham.

Song, Yang (2014) Intelligent PID controller based on fuzzy logic control and neural network technology for indoor environment quality improvement. PhD thesis, University of Nottingham.

Vernon, Kris (2014) A photographic probe for wet steam. EngD thesis, University of Nottingham.

2013

Anwar, Saqib (2013) Modelling of abrasive waterjet milled footprints. PhD thesis, University of Nottingham.

Kanu, Aimé Uzochukwu (2013) Characterisation of Churn Flow Coalescers (CFC) in vertical pipes. PhD thesis, University of Nottingham.

Li, Huiqi (2013) Discrete element method (DEM) modelling of rock flow and breakage within a cone crusher. PhD thesis, University of Nottingham.

2012

Garaev, Damir (2012) Multiphase flow in large diameter pipes. MSc(Res) thesis, University of Nottingham.

Mohammed, Arif (2012) Applying laser irradiation and intelligent concepts to identify grinding phenomena. PhD thesis, University of Nottingham.

Sharaf, Safa (2012) Testing and application of wire mesh sensors in vertical gas liquid two-phase flow. PhD thesis, University of Nottingham.

Van der Meulen, Gerrit Pieter (2012) Churn-annular gas-liquid flows in large diameter vertical pipes. PhD thesis, University of Nottingham.

2011

Chmutina, Ksenia (2011) Theory-based evaluation of the implementation of energy efficiency policies for commercial buildings in China. PhD thesis, University of Nottingham.

Crossley, Richard James (2011) Characterisation of tack for automated tape laying. PhD thesis, University of Nottingham.

Papastathis, Thomas (2011) Modelling and design methodology for fully-active fixtures. PhD thesis, University of Nottingham.

Ryll, Marco (2011) Towards a software framework for reconfigurable and adaptive fixturing systems. PhD thesis, University of Nottingham.

Zangana, Mohammed Haseeb Sedeeq (2011) Film behaviour of vertical gas-liquid flow in a large diameter pipe. PhD thesis, University of Nottingham.

2010

Bakker, Otto Jan (2010) Control methodology and modelling of active fixtures. PhD thesis, University of Nottingham.

Engelhardt, Andreas (2010) Investigation of several critical issues in screen mesh heat pipe manufacturing and operation. PhD thesis, University of Nottingham.

Hilton, Andrew (2010) Proposal for a cost-effective centrifugal rotary blood pump: design of a hybrid magnetic/hydrodynamic bearing. PhD thesis, University of Nottingham.

Ward, Christopher M. S. (2010) Novel NDE techniques in the power generation industry. EngD thesis, University of Nottingham.

2009

Baxter, Joseph L. (2009) Collaborative decision making in uncertain environments. PhD thesis, University of Nottingham.

Deshpande, Aditya A. (2009) High temperature aniso-thermal-mechanical analysis of superplastic forming tools. PhD thesis, University of Nottingham.

Houghton, Dean (2009) Representative fretting fatigue testing and prediction for splined couplings. PhD thesis, University of Nottingham.

Li, Qiang (2009) Virtual reality for fixture design and assembly. PhD thesis, University of Nottingham.

2008

Griffin, James (2008) Pattern recognition of micro and macro grinding phenomenon with a generic strategy to machine process monitoring. PhD thesis, University of Nottingham.

Hernandez Perez, Valente (2008) Gas-liquid two-phase flow in inclined pipes. PhD thesis, University of Nottingham.

Okaeme, Nnamdi (2008) Automated robust control system design for variable speed drives. PhD thesis, University of Nottingham.

2007

Houlston, Paul Robert (2007) Active vibration control of rotating machines. PhD thesis, University of Nottingham.

Roberts, Jacob Thomas (2007) Splitting techniques in vertical pneumatic conveying. PhD thesis, University of Nottingham.

2006

Geraci, Giorgio (2006) Gas-liquid flows in inclined pipes and venturis. PhD thesis, University of Nottingham.

2005

Ariyaratne, Chanchala (2005) Design and optimisation of swirl pipes and transition geometries for slurry transport. PhD thesis, University of Nottingham.

Tonkin, Ruth Julie Jane (2005) Swirling pipeflow of non-Newtonian and particle-laden fluids. PhD thesis, University of Nottingham.

2004

Rayner, Glen (2004) Creep of welded branched pipes. PhD thesis, University of Nottingham.

2003

Fowler, Gary (2003) Abrasive water-jet: controlled depth milling of titanium alloys. PhD thesis, University of Nottingham.

Margaritis, Dimitris-Peter (2003) Interfacial bonding in metal-matrix composites reinforced with metal-coated diamonds. PhD thesis, University of Nottingham.

1998

Raylor, Benjamin (1998) Pipe design for improved particle distribution and improved wear. PhD thesis, University of Nottingham.

1997

Darnton, Nicholas Julian (1997) Fuel consumption and pollutant emissions of spark ignition engines during cold-started drive cycles. PhD thesis, University of Nottingham.

1996

Colechin, Michael John Farrelly (1996) Heat transfer and fuel transport in the intake port of a spark ignition engine. PhD thesis, University of Nottingham.

1994

Haq, Shaiq A. (1994) Filament winding machine control using B-spline interpolation. PhD thesis, University of Nottingham.

1991

Gray Cobb, Susan Valerie (1991) Perception and orientation issues in human control of robot motion. PhD thesis, University of Nottingham.

1981

Kubba, Basil (1981) Use of the finite element method for the vibration analysis of rotating machinery. PhD thesis, University of Nottingham.

1976

Foster, N.W. (1976) Film cooling of gas turbine blades. PhD thesis, University of Nottingham.

1973

Bellamy, R.A. (1973) The development of model techniques for prediction of creep strains applied to steam turbine casings. PhD thesis, University of Nottingham.