Number of items: 16.
2015
Koutsonas, Spiridon
(2015)
Race-track modelling and variability in RTM for advanced composites structures.
PhD thesis, University of Nottingham.
Matveev, Mikhail Y.
(2015)
Effect of variabilities on mechanical properties of textile composites.
PhD thesis, University of Nottingham.
Nag, Ranajit Kumar
(2015)
Influence of fibre surface treatments and textile process on the properties of natural composites.
PhD thesis, University of Nottingham.
2013
Gommer, Frank
(2013)
Stochastic modelling of textile structures for resin flow analysis.
PhD thesis, University of Nottingham.
2010
Saldaeva, Elena
(2010)
Through thickness air permeability and thermal conductivity analysis for textile materials.
PhD thesis, University of Nottingham.
2009
Ruijter, Wout
(2009)
Analysis of mechanical properties of woven textile composites as a function of textile geometry.
PhD thesis, University of Nottingham.
2008
Maligno, Angelo Rosario
(2008)
Finite element investigations on the microstructure of composite materials.
PhD thesis, University of Nottingham.
Modi, Dhiren
(2008)
Modelling and active control of the Vacuum Infusion Process for composites manufacture.
PhD thesis, University of Nottingham.
Wang, Jinhuo
(2008)
Predictive modelling and experimental measurement of composite forming behaviour.
PhD thesis, University of Nottingham.
2007
Sherburn, Martin
(2007)
Geometric and Mechanical Modelling of Textiles.
PhD thesis, University of Nottingham.
Wiggers, Joram
(2007)
Analysis of textile deformation during preforming for liquid composite moulding.
PhD thesis, University of Nottingham.
2006
Wong, Chee Chiew
(2006)
Modelling the effects of textile preform architecture on permeability.
PhD thesis, University of Nottingham.
2004
Crookston, Jonathan Josiah
(2004)
Prediction of elastic behaviour and initial failure of textile composites.
PhD thesis, University of Nottingham.
2003
Garcia-Gil, Rafael
(2003)
Forming and consolidation of textile composites.
PhD thesis, University of Nottingham.
1998
Blagdon, Mark
(1998)
Characterisation of fabric deformation mechanisms during preform manufacture.
PhD thesis, University of Nottingham.
Turner, Matthew Richard
(1998)
Tow placement studies for liquid composite moulding.
PhD thesis, University of Nottingham.
This list was generated on Wed May 8 21:30:32 2024 UTC.
