Browse by Authors and Editors

Up a level
Export as [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | Date | No Grouping
Number of items: 46.

Zhang, Fan, Saleh, Ehab, Vaithilingam, Jayasheelan, Li, You, Tuck, Christopher, Hague, Richard, Wildman, Ricky and He, Yinfeng (2019) Reactive material jetting of polyimide insulators for complex circuit board design. Additive Manufacturing, 25 . pp. 477-484.

Ampatzidis, Theofanis, Leach, Richard K., Tuck, Christopher and Chronopoulos, Dimitrios (2018) Band gap behavior of optimal one-dimensional composite structures with an additive manufactured stiffener. Composites Part B: Engineering, 153 . pp. 26-35. ISSN 1359-8368

Holland, Sonia, Tuck, Christopher and Foster, Tim (2018) Selective recrystallization of cellulose composite powders and microstructure creation through 3D binder jetting. Carbohydrate Polymers . ISSN 1879-1344 (In Press)

Holland, Sonia, Tuck, Christopher and Foster, Tim (2018) Fluid gels: a new feedstock for high viscosity jetting. Food Biophysics, 13 (2). pp. 175-185. ISSN 1557-1866

Knott, Andrew N., Makarovsky, Oleg, O’Shea, Paul, Tuck, Christopher and Wu, Yupeng (2018) Scanning photocurrent microscopy of 3D printed light trapping structures in dye-sensitized solar cells. Solar Energy Materials and Solar Cells, 180 . pp. 103-109. ISSN 1879-3398

Vaithilingam, Jayasheelan, Saleh, Ehab, Wildman, Ricky D., Hague, Richard J.M. and Tuck, Christopher (2018) Optimisation of substrate angles for multi-material and multi-functional inkjet printing. Scientific Reports, 8 . 9030/1-9030/8. ISSN 2045-2322

Saint, Reece, Evans, William, Zhou, Yijia, Barrett, Thomas J., Fromhold, T.M., Saleh, Ehab, Maskery, Ian, Tuck, Christopher, Wildman, Ricky D., Orucevic, Fedja and Krüger, Peter (2018) 3D-printed components for quantum devices. Scientific Reports, 8 . p. 8368. ISSN 2045-2322

Maskery, Ian, Aboulkhair, Nesma T., Aremu, A.O., Tuck, Christopher and Ashcroft, Ian (2018) Compressive failure modes and energy absorption in additively manufactured double gyroid lattices. Additive Manufacturing, 16 . pp. 24-29. ISSN 2214-8604

Maskery, Ian, Sturm, L., Aremu, Adedeji, Panesar, Ajit, Williams, C.B., Tuck, Christopher, Wildman, Ricky D., Ashcroft, Ian and Hague, Richard J.M. (2017) Insights into the mechanical properties of several triply periodic minimal surface lattice structures made by polymer additive manufacturing. Polymer . ISSN 0032-3861

Hu, Qin, Sun, Xue-Zhong, Parmenter, Christopher D.J., Fay, Michael W., Smith, Emily F., Rance, Graham A., He, Yinfeng, Zhang, Fan, Liu, Yaan, Irvine, Derek, Tuck, Christopher, Hague, Richard J.M. and Wildman, Ricky D. (2017) Additive manufacture of complex 3D Au-containing nanocomposites by simultaneous two-photon polymerisation and photoreduction. Scientific Reports, 7 . 17150/1-17150/9. ISSN 2045-2322

Everton, Sarah K., Dickens, Phill, Tuck, Christopher and Dutton, Ben (2017) Using laser ultrasound to detect sub-surface defects in metal laser powder bed fusion components. JOM: the Journal of The Minerals, Metals & Materials Society . ISSN 1543-1851

Xu, Zhengkai, Hyde, Christopher J., Thompson, Adam, Leach, Richard K., Maskery, Ian, Tuck, Christopher and Clare, Adam T. (2017) Staged thermomechanical testing of nickel superalloys produced by selective laser melting. Materials & Design, 133 . pp. 520-527. ISSN 0264-1275

Xu, Zhengkai, Hyde, Christopher J., Thompson, Adam, Leach, Richard K., Maskery, Ian, Tuck, Christopher and Clare, Adam T. (2017) Defect evolution in laser powder bed fusion additive manufactured components during thermo-mechanical testing. In: Joint Special Interest Group meeting between euspen and ASPE Dimensional Accuracy and Surface Finish in Additive Manufacturing, 10-12 Oct2017, Leuven, Belgium.

Saleh, Ehab, Zhang, Fan, He, Yinfeng, Vaithilingam, Jayasheelan, Fernandez, Javier Ledesma, Wildman, Ricky D., Ashcroft, Ian, Hague, Richard J.M., Dickens, Phill and Tuck, Christopher (2017) 3D inkjet printing of electronics using UV conversion. Advanced Materials Technologies, 2 (10). 1700134/1-1700134/8. ISSN 2365-709X

Sturgess, Craig, Tuck, Christopher, Ashcroft, Ian and Wildman, Ricky D. (2017) 3D reactive inkjet printing of polydimethylsiloxane. Journal of Materials Chemistry C, 5 . pp. 9733-9743. ISSN 2050-7496

He, Yinfeng, Tuck, Christopher, Prina, Elisabetta, Kilsby, Sam, Christie, Steven D.R., Edmondson, Steve, Hague, Richard J.M., Rose, Felicity R.A.J. and Wildman, Ricky D. (2017) A new photocrosslinkable polycaprolactone based ink for three dimensional inkjet printing. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 105 (6). pp. 1645-1657. ISSN 1552-4981

Holland, Sonia, Foster, Tim, MacNaughtan, William and Tuck, Christopher (2017) Design and characterisation of food grade powders and inks for microstructure control using 3D printing. Journal of Food Engineering, 220 . pp. 12-19. ISSN 0260-8774

Chen, Xuesheng, Ashcroft, Ian, Tuck, Christopher, He, Y.F., Hague, Richard J.M. and Wildman, Ricky D. (2017) An investigation into the depth and time dependent behavior of UV cured 3D ink jet printed objects. Journal of Materials Research, 32 (8). pp. 1407-1420. ISSN 2044-5326

Chen, X., Ashcroft, Ian, Wildman, Ricky D. and Tuck, Christopher (2017) A combined inverse finite element – elastoplastic modelling method to simulate the size-effect in nanoindentation and characterise materials from the nano to micro-scale. International Journal of Solids and Structures, 104-105 . pp. 25-34. ISSN 0020-7683

Saleh, Ehab, Woolliams, Peter, Clarke, Bob, Gregory, Andrew, Greedy, Steve, Smartt, Chris, Wildman, Ricky D., Ashcroft, Ian, Hague, Richard J.M., Dickens, Phill and Tuck, Christopher (2017) 3D inkjet-printed UV-curable inks for multi-functional electromagnetic applications. Additive Manufacturing, 13 . pp. 143-148. ISSN 2214-8604

Farhan Khan, Muhammad, Brackett, David, Ashcroft, Ian, Tuck, Christopher and Wildman, Ricky D. (2016) A novel approach to design lesion-specific stents for minimum recoil. Journal of Medical Devices, 11 (1). 011001/1-011001/10. ISSN 1932-619X

Aremu, Adedeji, Brennan-Craddock, J.P.J., Panesar, Ajit, Ashcroft, Ian, Hague, Richard J.M., Wildman, Ricky D. and Tuck, Christopher (2016) A voxel-based method of constructing and skinning conformal and functionally graded lattice structures suitable for additive manufacturing. Additive Manufacturing, 13 . pp. 1-13. ISSN 2214-8604

Liu, Yaan, Hu, Qin, Zhang, Fan, Tuck, Christopher, Irvine, Derek, Hague, Richard J.M., Yinfeng, He, Simonelli, Marco, Rance, Graham, Smith, Emily and Wildman, Ricky D. (2016) Additive manufacture of three dimensional nanocomposite based objects through multiphoton fabrication. Polymers, 8 (9). p. 325. ISSN 2073-4360

Aboulkhair, Nesma T., Maskery, Ian, Tuck, Christopher, Ashcroft, Ian and Everitt, Nicola M. (2016) Improving the fatigue behaviour of a selectively laser melted aluminium alloy: influence of heat treatment and surface quality. Materials & Design, 104 . pp. 174-182. ISSN 0264-1275

Gunasekera, Deshani H.A.T., Kuek, SzeLee, Hasanaj, Denis, He, Yinfeng, Tuck, Christopher, Croft, Anna K. and Wildman, Ricky D. (2016) Three dimensional ink-jet printing of biomaterials using ionic liquids and co-solvents. Faraday Discussions, 190 . pp. 509-523. ISSN 1364-5498

Maskery, Ian, Aboulkhair, N.T., Aremu, Adedeji, Tuck, Christopher, Ashcroft, Ian, Wildman, Ricky D. and Hague, Richard J.M. (2016) A mechanical property evaluation of graded density Al-Si10-Mg lattice structures manufactured by selective laser melting. Materials Science and Engineering: A, 670 . pp. 264-274. ISSN 0921-5093

Aboulkhair, Nesma T., Maskery, Ian, Tuck, Christopher, Ashcroft, Ian and Everitt, Nicola M. (2016) The microstructure and mechanical properties of selectively laser melted AlSi10Mg: The effect of a conventional T6-like heat treatment. Materials Science and Engineering: A, 667 . pp. 139-146. ISSN 0921-5093

Vafaei, Saeid, Tuck, Christopher, Ashcroft, Ian and Wildman, Ricky D. (2016) Surface microstructuring to modify wettability for 3D printing of nano-filled inks. Chemical Engineering Research and Design, 109 . pp. 414-420. ISSN 0263-8762

Aboulkhair, Nesma T., Maskery, Ian, Tuck, Christopher, Ashcroft, Ian and Everitt, Nicola M. (2016) On the formation of AlSi10Mg single tracks and layers in selective laser melting: microstructure and nano-mechanical properties. Journal of Materials Processing Technology, 230 . pp. 88-98. ISSN 0924-0136

Maskery, Ian, Hussey, Alexandra, Panesar, Ajit, Aremu, Adedeji, Tuck, Christopher, Ashcroft, Ian and Hague, Richard J.M. (2016) An investigation into reinforced and functionally graded lattice structures. Journal of Cellular Plastics . ISSN 0021-955X

Baumers, Martin, Dickens, Phill, Tuck, Christopher and Hague, Richard (2016) The cost of additive manufacturing: machine productivity, economies of scale and technology-push. Technological Forecasting and Social Change, 102 . pp. 193-201. ISSN 0040-1625

Zhang, Fan, Tuck, Christopher, Hague, Richard J.M., He, Yinfeng, Saleh, Ehab, Li, You, Sturgess, Craig and Wildman, Ricky D. (2016) Inkjet printing of polyimide insulators for the 3D printing of dielectric materials for microelectronic applications. Journal of Applied Polymer Science (43361). ISSN 1097-4628

Baumers, Martin, Tuck, Christopher, Wildman, Ricky D., Ashcroft, Ian and Hague, Richard J.M. (2016) Shape complexity and process energy consumption in electron beam melting: a case of something for nothing in additive manufacturing? Journal of Industrial Ecology . ISSN 1530-9290

Everitt, Nicola M, Aboulkhair, Nesma T., Maskery, Ian, Tuck, Christopher and Ashcroft, Ian (2016) Nanoindentation shows uniform local mechanical properties across melt pools and layers produced by selective laser melting of AlSi10Mg alloy. Advanced Materials Letters, 7 (1). pp. 13-16. ISSN 0976-3961

Maskery, Ian, Aboulkhair, N.T., Corfield, M.R., Tuck, Christopher, Clare, A.T., Leach, Richard K., Wildman, Ricky D., Ashcroft, Ian and Hague, Richard J.M. (2016) Quantification and characterisation of porosity in selectively laser melted Al–Si10–Mg using x-ray computed tomography. Materials Characterization, 111 . pp. 193-204. ISSN 1873-4189

He, Yinfeng, Wildman, Ricky D., Tuck, Christopher, Christie, Steven D.R. and Edmonson, Steven (2016) An investigation of the behavior of solvent based polycaprolactone ink for material jetting. Scientific Reports . ISSN 2045-2322

Chen, X., Ashcroft, I., Wildman, Ricky D. and Tuck, Christopher (2015) An inverse method for determining the spatially resolved properties of viscoelastic–viscoplastic three-dimensional printed materials. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 471 (2183). 20150477/1-20150477/23. ISSN 1471-2946

Simonelli, Marco, Tuck, Christopher, Aboulkhair, Nesma T., Maskery, Ian, Ashcroft, Ian, Wildman, Ricky D. and Hague, Richard J.M. (2015) A study on the laser spatter and the oxidation reactions during selective laser melting of 316L stainless steel, Al-Si10-Mg, and Ti-6Al-4V. Metallurgical and Materials Transactions A, 46 (9). pp. 3842-3851. ISSN 1543-1940

Maskery, Ian, Aremu, Adedeji, Simonelli, M., Tuck, Christopher, Wildman, Ricky D., Ashcroft, Ian and Hague, Richard J.M. (2015) Mechanical properties of Ti-6Al-4V selectively laser melted parts with body-centred-cubic lattices of varying cell size. Experimental Mechanics, 55 (7). pp. 1261-1272. ISSN 1741-2765

Araujo, L.J.P., Özcan, Ender, Atkin, Jason, Baumers, Martin, Tuck, Christopher and Hague, Richard J.M. (2015) Toward better build volume packing in additive manufacturing: classification of existing problems and benchmarks. In: Annual International Solid Freeform Fabrication Symposium, 10-12 August 2015, Austin, Texas, USA.

Aboulkhair, Nesma T., Tuck, Christopher, Ashcroft, Ian, Maskery, Ian and Everitt, Nicola M. (2015) On the precipitation hardening of selective laser melted AlSi10Mg. Metallurgical and Materials Transactions A, 46 (8). pp. 3337-3341. ISSN 1073-5623

Aboulkhair, Nesma T., Tuck, Christopher, Maskery, Ian, Ashcroft, Ian and Everitt, Nicola (2015) Nano-hardness and microstructure of selective laser melted AlSi10Mg scan tracks. In: Industrial Laser Applications Symposium (ILAS 2015), 17-18 March 2015, Kenilworth, UK.

Ziegelmeier, Stefan, Christou, Panagiotis, Wöllecke, Frank, Tuck, Christopher, Goodridge, Ruth D., Hague, Richard J.M., Krampe, Erhard and Wintermantel, Erich (2015) An experimental study into the effects of bulk and flow behaviour of laser sintering polymer powders on resulting part properties. Journal of Materials Processing Technology, 215 . pp. 239-250. ISSN 0924-0136

Simonelli, Marco, Tse, Y.Y. and Tuck, Christopher (2014) Effect of the build orientation on the mechanical properties and fracture modes of SLM Ti–6Al–4V. Materials Science and Engineering: A, 616 . pp. 1-11. ISSN 0921-5093

Aboulkhair, Nesma T., Everitt, Nicola M., Ashcroft, Ian and Tuck, Christopher (2014) Reducing porosity in AlSi10Mg parts processed by selective laser melting. Additive Manufacturing, 1-4 . pp. 77-86. ISSN 2214-8604

Simonelli, Marco, Tse, Yau Yau and Tuck, Christopher (2014) On the texture formation of selective laser melted Ti-6Al-4V. Metallurgical and Materials Transactions A, 45 (6). pp. 2863-2872. ISSN 1543-1940

This list was generated on Thu Mar 28 16:31:54 2024 UTC.