• Login
• Admin

Article

Reddy, Liam, Preston, Simon P., Shipway, P.H., Davis, C. and Hussain, Tanvir (2018) Process parameter optimisation of laser clad iron based alloy: predictive models of deposition efficiency, porosity and dilution. Surface and Coatings Technology, 349 . pp. 198-207. ISSN 1879-3347

Barman, K., Shipway, P.H., Voisey, K.T. and Pattinson, G. (2018) The role of a thermally sprayed CuNiIn underlayer in the durability of a dry-film lubricant system in fretting: a phenomenological model. Tribology International, 123 . pp. 307-315. ISSN 1879-2464

Daure, J.L., Carrington, M.J., Shipway, P.H., McCartney, D.G. and Stewart, D.A. (2018) A comparison of the galling wear behaviour of PVD Cr and electroplated hard Cr thin films. Surface and Coatings Technology . ISSN 0257-8972

Karimi, G.N., Shipway, P.H., Stewart, D.A. and Hussain, T. (2018) Corrosion of cast Stellite-3 analogue in simulated PWR conditions. Corrosion Science . ISSN 1879-0496

Qin, W., Jin, X., Kirk, A., Shipway, P.H. and Sun, Wei (2018) Effects of surface roughness on local friction and temperature distributions in a steel-on-steel fretting contact. Tribology International, 120 . pp. 350-357. ISSN 1879-2464

O’Halloran, S.M., Harte, A.M., Shipway, P.H. and Leen, S.B. (2018) An experimental study on the key fretting variables for flexible marine risers. Tribology International, 117 . pp. 141-151. ISSN 1879-2464

Daure, J.L., Voisey, K.T., Shipway, P.H. and Stewart, D.A. (2017) The effect of coating architecture and defects on the corrosion behaviour of a PVD multilayer Inconel 625/Cr coating. Surface and Coatings Technology, 324 . pp. 403-412. ISSN 1879-3347

Jin, X., Shipway, P.H. and Sun, Wei (2017) The role of temperature and frequency on fretting wear of a like-on-like stainless steel contact. Tribology Letters, 65 . 77/1-77/15. ISSN 1573-2711

Hayes, E.K. and Shipway, P.H. (2017) Effect of test conditions on the temperature at which a protective debris bed is formed in fretting of a high strength steel. Wear, 376-377 (B). pp. 1460-1466. ISSN 0043-1648

Reddy, Liam, Shipway, P.H., Davis, Colin and Hussain, Tanvir (2017) HVOF and laser cladded Fe-Cr-B coating in simulated biomass combustion: microstructure and fireside corrosion. Oxidation of Metals . ISSN 1573-4889

Barman, K., Shipway, P.H., Voisey, K.T. and Pattinson, G. (2017) Evolution of damage in MoS2-based dry film lubricants (DFLs) in fretting wear – the effect of DFL thickness and contact geometry. Progress in Organic Coatings, 105 . pp. 67-80. ISSN 0300-9440

O'Halloran, S.M., Shipway, P.H., Connaire, A.D., Leen, Sean B. and Harte, A.M. (2017) A combined wear-fatigue design methodology for fretting in the pressure armour layer of flexible marine risers. Tribology International, 108 . pp. 7-15. ISSN 1879-2464

Hasan, Ahmed, Bennett, Chris, Shipway, P.H., Cater, S. and Martin, J. (2017) A numerical methodology for predicting tool wear in Friction Stir Welding. Journal of Materials Processing Technology, 241 . pp. 129-140. ISSN 0924-0136

Mohd Tobi, A.L., Sun, Wei and Shipway, P.H. (2017) Evolution of plasticity-based wear damage in gross sliding fretting of a Ti-6Al-4V non-conforming contact. Tribology International, 113 . pp. 474-486. ISSN 1879-2464

Tobi, A.L. Mohd, Sun, Wei and Shipway, P.H. (2016) Investigation on the plasticity accumulation of Ti-6Al-4V fretting wear by decoupling the effects of wear and surface profile in finite element modelling. Tribology International . ISSN 1879-2464

Warmuth, A.R., Sun, W. and Shipway, P.H. (2016) The roles of contact conformity, temperature and displacement amplitude on the lubricated fretting wear of a steel-on-steel contact. Royal Society Open Science, 3 (10). 150637/1-150637/28. ISSN 2054-5703

Jin, X., Sun, Wei and Shipway, P.H. (2016) The role of geometry changes and debris formation associated with wear on the temperature field in fretting contacts. Tribology International, 102 . pp. 392-406. ISSN 1879-2464

Jin, X., Sun, W. and Shipway, P.H. (2016) Derivation of a wear scar geometry-independent coefficient of friction from fretting loops exhibiting non-Coulomb frictional behaviour. Tribology International, 102 . pp. 561-568. ISSN 1879-2464

Hasan, Ahmed, Bennett, Chris and Shipway, P.H. (2015) A numerical comparison of the flow behaviour in Friction Stir Welding (FSW) using unworn and worn tool geometries. Materials & Design, 87 . pp. 1037-1046. ISSN 0264-1275

Jin, X., Shipway, P.H. and Sun, W. (2015) The role of frictional power dissipation (as a function of frequency) and test temperature on contact temperature and the subsequent wear behaviour in a stainless steel contact in fretting. Wear, 330 . pp. 103-111. ISSN 1873-2577

Warmuth, A.R., Shipway, P.H. and Sun, W. (2015) Fretting wear mapping: the influence of contact geometry and frequency on debris formation and ejection for a steel-on-steel pair. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 471 (2178). pp. 1-22. ISSN 1471-2946

Pearson, S.R. and Shipway, P.H. (2014) Is the wear coefficient dependent upon slip amplitude in fretting?: Vingsbo and Söderberg revisited. Wear, 330 . pp. 93-102. ISSN 1873-2577

Lemm, J.D., Warmuth, A.R., Pearson, S.R. and Shipway, P.H. (2014) The influence of surface hardness on the fretting wear of steel pairs: its role in debris retention in the contact. Tribology International, 81 . pp. 258-266. ISSN 1879-2464

Pearson, S.R., Shipway, P.H., Abere, J.O. and Hewitt, R.A.A. (2013) The effect of temperature on wear and friction of a high strength steel in fretting. Wear, 303 (1-2). pp. 622-631. ISSN 0043-1648

Kamdi, Z., Shipway, P.H., Voisey, K.T. and Sturgeon, A.J. (2011) Abrasive wear behaviour of conventional and large-particle tungsten carbide-based cermet coatings as a function of abrasive size and type. Wear, 271 (9-10). pp. 1264-1272. ISSN 0043-1648

Zhang, Deen, Harris, S. J., McCartney, D.G., Pashby, I.R., Powell, J., Shipway, P.H. and Voisey, K.T. (2008) The effect of laser transformation notching on the controlled fracture of a high carbon (C70S6 ) steel. Materials Science and Engineering: A, 489 (1-2). pp. 273-284. ISSN 0921-5093