• Login
• Admin

Article

Sanjuan-Alberte, Paola, Alexander, Morgan R., Hague, Richard J.M. and Rawson, Frankie J. (2018) Electrochemically stimulating developments in bioelectronic medicine. Bioelectronic Medicine, 4 (1). ISSN 2332-8886

Vaithilingam, Jayasheelan, Saleh, Ehab, Wildman, Ricky D., Hague, Richard J.M. and Tuck, Christopher (2018) Optimisation of substrate angles for multi-material and multi-functional inkjet printing. Scientific Reports, 8 . 9030/1-9030/8. ISSN 2045-2322

Simonelli, Marco, Aboulkhair, Nesma T., Cohen, Philip, Murray, James W., Clare, Adam T., Tuck, Chris and Hague, Richard J.M. (2018) A comparison of Ti-6Al-4V in-situ alloying in Selective Laser Melting using simply-mixed and satellited powder blend feedstocks. Materials Characterization . ISSN 1044-5803

Vaithilingam, Jayasheelan, Saleh, Ehab, Körner, Lars, Wildman, Ricky D., Hague, Richard J.M., Leach, Richard K. and Tuck, Christopher J. (2018) 3-dimensional inkjet printing of macro structures from silver nanoparticles. Materials & Design, 139 . pp. 81-88. ISSN 0264-1275

Louzao, Iria, Koch, Britta, Taresco, Vincenzo, Ruiz Cantu, Laura, Irvine, Derek J., Roberts, Clive J., Tuck, Christopher J., Alexander, Cameron, Hague, Richard J.M., Wildman, Ricky D. and Alexander, Morgan R. (2018) Identification of novel ‘inks’ for 3D printing using high throughput screening: bioresorbable photocurable polymers for controlled drug delivery. ACS Applied Materials & Interfaces, 10 (8). pp. 6841-6848. ISSN 1944-8244

Maskery, Ian, Sturm, L., Aremu, Adedeji, Panesar, Ajit, Williams, C.B., Tuck, Christopher, Wildman, Ricky D., Ashcroft, Ian and Hague, Richard J.M. (2017) Insights into the mechanical properties of several triply periodic minimal surface lattice structures made by polymer additive manufacturing. Polymer . ISSN 0032-3861

Hu, Qin, Sun, Xue-Zhong, Parmenter, Christopher D.J., Fay, Michael W., Smith, Emily F., Rance, Graham A., He, Yinfeng, Zhang, Fan, Liu, Yaan, Irvine, Derek, Tuck, Christopher, Hague, Richard J.M. and Wildman, Ricky D. (2017) Additive manufacture of complex 3D Au-containing nanocomposites by simultaneous two-photon polymerisation and photoreduction. Scientific Reports, 7 . 17150/1-17150/9. ISSN 2045-2322

Saleh, Ehab, Zhang, Fan, He, Yinfeng, Vaithilingam, Jayasheelan, Fernandez, Javier Ledesma, Wildman, Ricky D., Ashcroft, Ian, Hague, Richard J.M., Dickens, Phill and Tuck, Christopher (2017) 3D inkjet printing of electronics using UV conversion. Advanced Materials Technologies, 2 (10). 1700134/1-1700134/8. ISSN 2365-709X

He, Yinfeng, Zhang, Fan, Saleh, Ehab, Vaithilingam, Jayasheelan, Aboulkhair, Nesma T., Begines, Belen, Tuck, Chris J., Hague, Richard J.M., Ashcroft, Ian A. and Wildman, Ricky D. (2017) A tripropylene glycol diacrylate-based polymeric support ink for material jetting. Additive Manufacturing, 16 . pp. 153-161. ISSN 2214-8604

Zhang, Fan, Hu, Q., Castanon, A., He, Y., Liu, Y., Paul, B.T., Tuck, C.J., Hague, Richard J.M. and Wildman, Ricky D. (2017) Multi-branched benzylidene ketone based photoinitiators for multiphoton fabrication. Additive Manufacturing, 16 . pp. 206-212. ISSN 2214-8604

He, Yinfeng, Tuck, Christopher, Prina, Elisabetta, Kilsby, Sam, Christie, Steven D.R., Edmondson, Steve, Hague, Richard J.M., Rose, Felicity R.A.J. and Wildman, Ricky D. (2017) A new photocrosslinkable polycaprolactone based ink for three dimensional inkjet printing. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 105 (6). pp. 1645-1657. ISSN 1552-4981

Clark, Elizabeth A., Alexander, Morgan R., Irvine, Derek J., Roberts, Clive J., Wallace, Martin J., Sharpe, Sonja, Yoo, Jae, Hague, Richard J.M., Tuck, Chris J. and Wildman, Ricky D. (2017) 3D printing of tablets using inkjet with UV photoinitiation. International Journal of Pharmaceutics . ISSN 0378-5173

Chen, Xuesheng, Ashcroft, Ian, Tuck, Christopher, He, Y.F., Hague, Richard J.M. and Wildman, Ricky D. (2017) An investigation into the depth and time dependent behavior of UV cured 3D ink jet printed objects. Journal of Materials Research, 32 (8). pp. 1407-1420. ISSN 2044-5326

Saleh, Ehab, Woolliams, Peter, Clarke, Bob, Gregory, Andrew, Greedy, Steve, Smartt, Chris, Wildman, Ricky D., Ashcroft, Ian, Hague, Richard J.M., Dickens, Phill and Tuck, Christopher (2017) 3D inkjet-printed UV-curable inks for multi-functional electromagnetic applications. Additive Manufacturing, 13 . pp. 143-148. ISSN 2214-8604

Aremu, Adedeji, Brennan-Craddock, J.P.J., Panesar, Ajit, Ashcroft, Ian, Hague, Richard J.M., Wildman, Ricky D. and Tuck, Christopher (2016) A voxel-based method of constructing and skinning conformal and functionally graded lattice structures suitable for additive manufacturing. Additive Manufacturing, 13 . pp. 1-13. ISSN 2214-8604

Vaithilingam, Jayasheelan, Prina, Elisabetta, Goodridge, Ruth D., Hague, Richard J.M., Edmondson, Steve, Rose, Felicity R.A.J. and Christie, Steven D.R. (2016) Surface chemistry of Ti6Al4V components fabricated using selective laser melting for biomedical applications. Materials Science and Engineering: C, 67 . pp. 294-303. ISSN 0928-4931

Liu, Yaan, Hu, Qin, Zhang, Fan, Tuck, Christopher, Irvine, Derek, Hague, Richard J.M., Yinfeng, He, Simonelli, Marco, Rance, Graham, Smith, Emily and Wildman, Ricky D. (2016) Additive manufacture of three dimensional nanocomposite based objects through multiphoton fabrication. Polymers, 8 (9). p. 325. ISSN 2073-4360

Maskery, Ian, Aboulkhair, N.T., Aremu, Adedeji, Tuck, Christopher, Ashcroft, Ian, Wildman, Ricky D. and Hague, Richard J.M. (2016) A mechanical property evaluation of graded density Al-Si10-Mg lattice structures manufactured by selective laser melting. Materials Science and Engineering: A, 670 . pp. 264-274. ISSN 0921-5093

Vaithilingam, Jayasheelan, Goodridge, Ruth D., Hague, Richard J.M., Christie, Steven D.R. and Edmondson, Steve (2016) The effect of laser remelting on the surface chemistry of Ti6al4V components fabricated by selective laser melting. Journal of Materials Processing Technology, 232 . pp. 1-8. ISSN 0924-0136

Maskery, Ian, Hussey, Alexandra, Panesar, Ajit, Aremu, Adedeji, Tuck, Christopher, Ashcroft, Ian and Hague, Richard J.M. (2016) An investigation into reinforced and functionally graded lattice structures. Journal of Cellular Plastics . ISSN 0021-955X

Zhang, Fan, Tuck, Christopher, Hague, Richard J.M., He, Yinfeng, Saleh, Ehab, Li, You, Sturgess, Craig and Wildman, Ricky D. (2016) Inkjet printing of polyimide insulators for the 3D printing of dielectric materials for microelectronic applications. Journal of Applied Polymer Science (43361). ISSN 1097-4628

Baumers, Martin, Tuck, Christopher, Wildman, Ricky D., Ashcroft, Ian and Hague, Richard J.M. (2016) Shape complexity and process energy consumption in electron beam melting: a case of something for nothing in additive manufacturing? Journal of Industrial Ecology . ISSN 1530-9290

Maskery, Ian, Aboulkhair, N.T., Corfield, M.R., Tuck, Christopher, Clare, A.T., Leach, Richard K., Wildman, Ricky D., Ashcroft, Ian and Hague, Richard J.M. (2016) Quantification and characterisation of porosity in selectively laser melted Al–Si10–Mg using x-ray computed tomography. Materials Characterization, 111 . pp. 193-204. ISSN 1873-4189

Panesar, Ajit, Brackett, D., Ashcroft, Ian, Wildman, Ricky D. and Hague, Richard J.M. (2015) Design framework for multifunctional additive manufacturing: placement and routing of three-dimensional printed circuit volumes. Journal of Mechanical Design, 137 (11). 111414/1-111414/10. ISSN 1528-9001

Simonelli, Marco, Tuck, Christopher, Aboulkhair, Nesma T., Maskery, Ian, Ashcroft, Ian, Wildman, Ricky D. and Hague, Richard J.M. (2015) A study on the laser spatter and the oxidation reactions during selective laser melting of 316L stainless steel, Al-Si10-Mg, and Ti-6Al-4V. Metallurgical and Materials Transactions A, 46 (9). pp. 3842-3851. ISSN 1543-1940

Maskery, Ian, Aremu, Adedeji, Simonelli, M., Tuck, Christopher, Wildman, Ricky D., Ashcroft, Ian and Hague, Richard J.M. (2015) Mechanical properties of Ti-6Al-4V selectively laser melted parts with body-centred-cubic lattices of varying cell size. Experimental Mechanics, 55 (7). pp. 1261-1272. ISSN 1741-2765

Ziegelmeier, Stefan, Christou, Panagiotis, Wöllecke, Frank, Tuck, Christopher, Goodridge, Ruth D., Hague, Richard J.M., Krampe, Erhard and Wintermantel, Erich (2015) An experimental study into the effects of bulk and flow behaviour of laser sintering polymer powders on resulting part properties. Journal of Materials Processing Technology, 215 . pp. 239-250. ISSN 0924-0136

Vaithilingam, Jayasheelan, Kilsby, Samuel, Goodridge, Ruth D., Christie, Steven D.R., Edmondson, Steve and Hague, Richard J.M. (2015) Functionalisation of Ti6Al4V components fabricated using selective laser melting with a bioactive compound. Materials Science and Engineering: C, 46 . pp. 52-61. ISSN 0928-4931

Brackett, D., Ashcroft, I., Wildman, R.D. and Hague, Richard J.M. (2014) An error diffusion based method to generate functionally graded cellular structures. Computers & Structures, 138 . pp. 102-111. ISSN 0045-7949

Conference or Workshop Item

Araujo, L.J.P., Özcan, Ender, Atkin, Jason, Baumers, Martin, Tuck, Christopher and Hague, Richard J.M. (2015) Toward better build volume packing in additive manufacturing: classification of existing problems and benchmarks. In: Annual International Solid Freeform Fabrication Symposium, 10-12 August 2015, Austin, Texas, USA.