• Login
• Admin

2018

Williams, Orla, Taylor, Simon, Lester, Edward, Kingman, Sam, Giddings, Donald and Eastwick, Carol (2018) Applicability of mechanical tests for biomass pellet characterisation for bioenergy applications. Materials, 11 (8). ISSN 1996-1944

Bozhko, Serhiy, Yang, Tao, Le Peuvedic, Jean-Marc, Arumugam, Puvaneswaran, Degano, Marco, La Rocca, Antonino, Xu, Zeyuan, Rashed, Mohamed, Fernando, Weerahannadige, Hill, Christopher Ian, Eastwick, Carol, Pickering, Stephen J., Gerada, C. and Wheeler, Patrick (2018) Development of aircraft electric starter-generator system based-on active rectification technology. IEEE Transactions on Transportation Electrification . ISSN 2372-2088

Shan, Liang, Kong, Ming, Bennet, Tom D., Sarroza, Archi C., Eastwick, Carol, Sun, Duo, Lu, Gang, Yan, Yong and Liu, Hao (2018) Studies on combustion behaviours of single biomass particles using a visualization method. Biomass and Bioenergy, 109 . pp. 54-60. ISSN 1873-2909

2017

Williams, Orla, Eastwick, Carol, Kingman, S.W., Giddings, Donald, Lormor, Stephen and Lester, Edward (2017) Overcoming the caking phenomenon in olive mill wastes. Industrial Crops and Products, 101 . pp. 92-102. ISSN 0926-6690

Williams, Orla, Lester, Edward, Kingman, Sam, Giddings, Donald, Lormor, Stephen and Eastwick, Carol (2017) Benefits of dry comminution of biomass pellets in a knife mill. Biosystems Engineering, 160 . pp. 42-54. ISSN 1537-5110

Graham, Shalini, Eastwick, Carol, Snape, Colin and Quick, Will (2017) Mechanical degradation of biomass wood pellets during long term stockpile storage. Fuel Processing Technology, 160 . pp. 143-151. ISSN 0378-3820

Bai, Xiaojing, Lu, Gang, Bennet, Tom D., Sarroza, Archi C., Eastwick, Carol, Liu, Hao and Yan, Yong (2017) Combustion behavior profiling of single pulverized coal particles in a drop tube furnace through high-speed imaging and image analysis. Experimental Thermal and Fluid Science, 85 . pp. 322-330. ISSN 0894-1777

2016

Sarroza, Archi C., Bennet, Tom D., Eastwick, Carol and Liu, Hao (2016) Characterising pulverised fuel ignition in a visual drop tube furnace by use of a high-speed imaging technique. Fuel Processing Technology, 157 . pp. 1-11. ISSN 0378-3820

Williams, Orla, Newbolt, Gary, Eastwick, Carol, Kingman, Sam W., Giddings, Donald, Lormor, Stephen and Lester, Edward (2016) Influence of mill type on densified biomass comminution. Applied Energy, 182 . pp. 219-231. ISSN 0306-2619

Connor, Peter H., Eastwick, Carol, Pickering, S.J., Gerada, C. and Rolston, R. (2016) Stator and rotor vent modelling in a MVA rated synchronous machine. In: International Conference on Electrical Machines (ICEM 2016), 4-7 Sept. 2016, Lausanne, Switzerland.

La Rocca, A., Xu, Z., Arumugam, P., Pickering, S.J., Eastwick, Carol, Gerada, C. and Bozhko, S. (2016) Thermal management of a high speed permanent magnet machine for an aeroengine. In: XXIIth International Conference on Electrical Machines (ICEM '2016), 4-7 September 2016, Lausanne, Switzerland.

Graham, Shalini L., Ogunfayo, Ibrahim, Hall, Matthew R., Snape, Colin, Quick, Will, Weatherstone, Susan and Eastwick, Carol (2016) Changes in the mechanical properties of biomass wood pellets during artificial degradation in a laboratory environment. Fuel Processing Technology . ISSN 0378-3820

Madanayake, Buddhike Neminda, Gan, Suyin, Eastwick, Carol and Ng, Hoon Kiat (2016) Leaching as a pretreatment process to complement torrefaction in improving co-firing characteristics of Jatropha curcas seed cake. Waste and Biomass Valorization, 7 (3). pp. 559-569. ISSN 1877-2641

Madanayakea, Buddhike Neminda, Gan, Suyin, Eastwick, Carol and Ng, Hoon Kiat (2016) Thermochemical and structural changes in Jatropha curcas seed cake during torrefaction for its use as coal co-firing feedstock. Energy, 100 . pp. 262-272. ISSN 0360-5442

2015

Williams, Orla, Eastwick, Carol, Lester, Edward, Giddings, Donald and Lormor, Stephen (2015) Impact of mill type on biomass mill behavior. In: 2015 ASABE Annual International Meeting, 26-29 July 2015, New Orleans, USA.

Williams, Orla, Eastwick, Carol, Kingman, S.W., Giddings, Donald, Lormor, Stephen and Lester, Edward (2015) Investigation into the applicability of Bond Work Index (BWI) and Hardgrove Grindability Index (HGI) tests for several biomasses compared to Colombian La Loma coal. Fuel, 158 . pp. 379-387. ISSN 1873-7153

Gkanas, Evangelos I., Grant, David M., Stuart, Alastair D., Eastwick, Carol, Book, D., Nayebossadri, S., Pickering, L. and Walker, Gavin S. (2015) Numerical study on a two-stage metal hydride hydrogen compression system. Journal of Alloys and Compounds, 645 (Supp1). S18-S22. ISSN 1873-4669

2014

Williams, Orla, Eastwick, Carol, Lester, Edward, Giddings, Donald and Byrne, Norman (2014) The impact of moisture on the milling behavior of different biomasses. In: 22nd European Biomass Conference and Exhibition, 23rd-26th June 2014, Hamburg, Germany.

2013

Williams, Orla, Eastwick, Carol, Lester, Edward, Giddings, Donald and Byrne, Norman (2013) Optimisation of biomass milling for conveyance and combustion. In: 21st European Biomass Conference and Exhibition, 3-7 June 2013, Copenhagen, Denmark.

Connor, Peter H., Pickering, S.J., Gerada, C., Eastwick, Carol, Micallef, Christopher and Tighe, Chris (2013) Computational fluid dynamics modelling of an entire synchronous generator for improved thermal management. IET Electric Power Applications, 7 (3). pp. 231-236. ISSN 1751-8679

Taylor, Jennifer, Eastwick, Carol, Lawrence, Claire and Wilson, Robin (2013) Noise levels and noise perception from small and micro wind turbines. Renewable Energy, 55 . pp. 120-127. ISSN 1879-0682

2007

Eastwick, Carol, Simmons, K. and Al-Shibl, K. (2007) Modelling windage power loss from an enclosed spur gear. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 221 (3). pp. 331-341. ISSN 2041-2967

2006

Wang, Y., Simmons, K., Eastwick, Carol and Hibberd, S. (2006) Study of aero-engine oil-air separators. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 220 (7). pp. 707-717. ISSN 0957-6509