• Login
• Admin

2020

Gargalis, Leonidas, Madonna, Vincenzo, Giangrande, Paolo, Rocca, Roberto, Hardy, Mark, Ashcroft, Ian, Galea, Michael and Hague, Richard (2020) Additive manufacturing and testing of a soft magnetic rotor for a switched reluctance motor. IEEE Access, 8 . pp. 206982-206991. ISSN 2169-3536

2018

Silbernagel, Cassidy, Ashcroft, Ian, Dickens, Phill and Galea, Michael (2018) Electrical resistivity of additively manufactured AlSi10Mg for use in electric motors. Additive Manufacturing, 21 . pp. 395-403. ISSN 2214-8604

Maskery, Ian, Aboulkhair, Nesma T., Aremu, A.O., Tuck, Christopher and Ashcroft, Ian (2018) Compressive failure modes and energy absorption in additively manufactured double gyroid lattices. Additive Manufacturing, 16 . pp. 24-29. ISSN 2214-8604

Gleadall, Andrew, Ashcroft, Ian and Segal, Joel (2018) VOLCO: a predictive model for 3D printed microarchitecture. Additive Manufacturing, 21 . pp. 605-618. ISSN 2214-8604

Zhang, Yuwu, Liu, Tao, Ren, Huan, Maskery, Ian and Ashcroft, Ian (2018) Dynamic compressive response of additively manufactured AlSi10Mg alloy hierarchical honeycomb structures. Composite Structures . ISSN 1879-1085 (In Press)

Panesar, Ajit, Abdi, Meisam, Hickman, Duncan and Ashcroft, Ian (2018) Strategies for functionally graded lattice structures derived using topology optimisation for additive manufacturing. Additive Manufacturing, 19 . pp. 81-94. ISSN 2214-8604

Abdi, Meisam, Ashcroft, Ian and Wildman, Ricky (2018) Topology optimization of geometrically nonlinear structures using an evolutionary optimization method. Engineering Optimization . ISSN 1029-0273

Abdi, Meisam, Ashcroft, Ian and Wildman, Ricky D. (2018) Design optimization for an additively manufactured automotive component. International Journal of Powertrains, 7 (1-3). pp. 142-161. ISSN 1742-4275

2017

Maskery, Ian, Sturm, L., Aremu, Adedeji, Panesar, Ajit, Williams, C.B., Tuck, Christopher, Wildman, Ricky D., Ashcroft, Ian and Hague, Richard J.M. (2017) Insights into the mechanical properties of several triply periodic minimal surface lattice structures made by polymer additive manufacturing. Polymer . ISSN 0032-3861

Saleh, Ehab, Zhang, Fan, He, Yinfeng, Vaithilingam, Jayasheelan, Fernandez, Javier Ledesma, Wildman, Ricky D., Ashcroft, Ian, Hague, Richard J.M., Dickens, Phill and Tuck, Christopher (2017) 3D inkjet printing of electronics using UV conversion. Advanced Materials Technologies, 2 (10). 1700134/1-1700134/8. ISSN 2365-709X

Sturgess, Craig, Tuck, Christopher, Ashcroft, Ian and Wildman, Ricky D. (2017) 3D reactive inkjet printing of polydimethylsiloxane. Journal of Materials Chemistry C, 5 . pp. 9733-9743. ISSN 2050-7496

Panesar, Ajit, Ashcroft, Ian, Brackett, David, Wildman, Ricky D. and Hague, Richard (2017) Design framework for multifunctional additive manufacturing: coupled optimization strategy for structures with embedded functional systems. Additive Manufacturing, 16 . pp. 98-106. ISSN 2214-8604

Kyobula, Mary, Adedeji, Aremu, Alexander, Morgan R., Saleh, Ehab, Wildman, Ricky D., Ashcroft, Ian, Gellert, Paul R. and Roberts, Clive J. (2017) 3D inkjet printing of tablets exploiting bespoke complex geometries for controlled and tuneable drug release. Journal of Controlled Release, 261 . pp. 207-215. ISSN 1873-4995

Aboulkhair, Nesma T., Everitt, Nicola M., Maskery, Ian, Ashcroft, Ian and Tuck, Chris (2017) Selective laser melting of aluminium alloys. MRS Bulletin, 42 (4). pp. 311-319. ISSN 1938-1425

Chen, Xuesheng, Ashcroft, Ian, Tuck, Christopher, He, Y.F., Hague, Richard J.M. and Wildman, Ricky D. (2017) An investigation into the depth and time dependent behavior of UV cured 3D ink jet printed objects. Journal of Materials Research, 32 (8). pp. 1407-1420. ISSN 2044-5326

Catchpole-Smith, S., Aboulkhair, N., Parry, L., Tuck, C., Ashcroft, Ian and Clare, A. (2017) Fractal scan strategies for selective laser melting of ‘unweldable’ nickel superalloys. Additive Manufacturing . ISSN 2214-8604

Panesar, Ajit, Brackett, David, Ashcroft, Ian, Wildman, Ricky D. and Hague, Richard (2017) Hierarchical remeshing strategies with mesh mapping for topology optimisation. International Journal for Numerical Methods in Engineering . ISSN 1097-0207

Chen, X., Ashcroft, Ian, Wildman, Ricky D. and Tuck, Christopher (2017) A combined inverse finite element – elastoplastic modelling method to simulate the size-effect in nanoindentation and characterise materials from the nano to micro-scale. International Journal of Solids and Structures, 104-105 . pp. 25-34. ISSN 0020-7683

Saleh, Ehab, Woolliams, Peter, Clarke, Bob, Gregory, Andrew, Greedy, Steve, Smartt, Chris, Wildman, Ricky D., Ashcroft, Ian, Hague, Richard J.M., Dickens, Phill and Tuck, Christopher (2017) 3D inkjet-printed UV-curable inks for multi-functional electromagnetic applications. Additive Manufacturing, 13 . pp. 143-148. ISSN 2214-8604

2016

Farhan Khan, Muhammad, Brackett, David, Ashcroft, Ian, Tuck, Christopher and Wildman, Ricky D. (2016) A novel approach to design lesion-specific stents for minimum recoil. Journal of Medical Devices, 11 (1). 011001/1-011001/10. ISSN 1932-619X

Aremu, Adedeji, Brennan-Craddock, J.P.J., Panesar, Ajit, Ashcroft, Ian, Hague, Richard J.M., Wildman, Ricky D. and Tuck, Christopher (2016) A voxel-based method of constructing and skinning conformal and functionally graded lattice structures suitable for additive manufacturing. Additive Manufacturing, 13 . pp. 1-13. ISSN 2214-8604

Parry, L., Ashcroft, Ian and Wildman, Ricky D. (2016) Understanding the effect of laser scan strategy on residual stress in selective laser melting through thermo-mechanical simulation. Additive Manufacturing, 12 (A). pp. 1-15. ISSN 2214-8604

Aboulkhair, Nesma T., Maskery, Ian, Tuck, Christopher, Ashcroft, Ian and Everitt, Nicola M. (2016) Improving the fatigue behaviour of a selectively laser melted aluminium alloy: influence of heat treatment and surface quality. Materials & Design, 104 . pp. 174-182. ISSN 0264-1275

Maskery, Ian, Aboulkhair, N.T., Aremu, Adedeji, Tuck, Christopher, Ashcroft, Ian, Wildman, Ricky D. and Hague, Richard J.M. (2016) A mechanical property evaluation of graded density Al-Si10-Mg lattice structures manufactured by selective laser melting. Materials Science and Engineering: A, 670 . pp. 264-274. ISSN 0921-5093

Badiee, A., Ashcroft, Ian and Wildman, Ricky D. (2016) The thermo-mechanical degradation of ethylene vinyl acetate used as a solar panel adhesive and encapsulant. International Journal of Adhesion and Advesives, 68 . pp. 212-218. ISSN 0143-7496

Aboulkhair, Nesma T., Maskery, Ian, Tuck, Christopher, Ashcroft, Ian and Everitt, Nicola M. (2016) The microstructure and mechanical properties of selectively laser melted AlSi10Mg: The effect of a conventional T6-like heat treatment. Materials Science and Engineering: A, 667 . pp. 139-146. ISSN 0921-5093

Garibaldi, Michele, Ashcroft, Ian, Simonelli, Marco and Hague, Richard (2016) Metallurgy of high-silicon steel parts produced using selective laser melting. Acta Materialia, 110 . pp. 207-216. ISSN 1359-6454

Vafaei, Saeid, Tuck, Christopher, Ashcroft, Ian and Wildman, Ricky D. (2016) Surface microstructuring to modify wettability for 3D printing of nano-filled inks. Chemical Engineering Research and Design, 109 . pp. 414-420. ISSN 0263-8762

Aboulkhair, Nesma T., Maskery, Ian, Tuck, Christopher, Ashcroft, Ian and Everitt, Nicola M. (2016) On the formation of AlSi10Mg single tracks and layers in selective laser melting: microstructure and nano-mechanical properties. Journal of Materials Processing Technology, 230 . pp. 88-98. ISSN 0924-0136

Maskery, Ian, Hussey, Alexandra, Panesar, Ajit, Aremu, Adedeji, Tuck, Christopher, Ashcroft, Ian and Hague, Richard J.M. (2016) An investigation into reinforced and functionally graded lattice structures. Journal of Cellular Plastics . ISSN 0021-955X

Baumers, Martin, Tuck, Christopher, Wildman, Ricky D., Ashcroft, Ian and Hague, Richard J.M. (2016) Shape complexity and process energy consumption in electron beam melting: a case of something for nothing in additive manufacturing? Journal of Industrial Ecology . ISSN 1530-9290

Everitt, Nicola M, Aboulkhair, Nesma T., Maskery, Ian, Tuck, Christopher and Ashcroft, Ian (2016) Nanoindentation shows uniform local mechanical properties across melt pools and layers produced by selective laser melting of AlSi10Mg alloy. Advanced Materials Letters, 7 (1). pp. 13-16. ISSN 0976-3961

Maskery, Ian, Aboulkhair, N.T., Corfield, M.R., Tuck, Christopher, Clare, A.T., Leach, Richard K., Wildman, Ricky D., Ashcroft, Ian and Hague, Richard J.M. (2016) Quantification and characterisation of porosity in selectively laser melted Al–Si10–Mg using x-ray computed tomography. Materials Characterization, 111 . pp. 193-204. ISSN 1873-4189

2015

Panesar, Ajit, Brackett, D., Ashcroft, Ian, Wildman, Ricky D. and Hague, Richard J.M. (2015) Design framework for multifunctional additive manufacturing: placement and routing of three-dimensional printed circuit volumes. Journal of Mechanical Design, 137 (11). 111414/1-111414/10. ISSN 1528-9001

Simonelli, Marco, Tuck, Christopher, Aboulkhair, Nesma T., Maskery, Ian, Ashcroft, Ian, Wildman, Ricky D. and Hague, Richard J.M. (2015) A study on the laser spatter and the oxidation reactions during selective laser melting of 316L stainless steel, Al-Si10-Mg, and Ti-6Al-4V. Metallurgical and Materials Transactions A, 46 (9). pp. 3842-3851. ISSN 1543-1940

Maskery, Ian, Aremu, Adedeji, Simonelli, M., Tuck, Christopher, Wildman, Ricky D., Ashcroft, Ian and Hague, Richard J.M. (2015) Mechanical properties of Ti-6Al-4V selectively laser melted parts with body-centred-cubic lattices of varying cell size. Experimental Mechanics, 55 (7). pp. 1261-1272. ISSN 1741-2765

Aboulkhair, Nesma T., Tuck, Christopher, Ashcroft, Ian, Maskery, Ian and Everitt, Nicola M. (2015) On the precipitation hardening of selective laser melted AlSi10Mg. Metallurgical and Materials Transactions A, 46 (8). pp. 3337-3341. ISSN 1073-5623

Zeng, Xuesen, Long, Andew C.A., Ashcroft, Ian and Potluri, Prasad (2015) Fibre architecture design of 3D woven composite with genetic algorithms: a unit cell based optimisation framework and performance assessment. In: 20th International Conference on Composite Materials, 19-24 July 2015, Copenhagen, Denmark.

Aboulkhair, Nesma T., Tuck, Christopher, Maskery, Ian, Ashcroft, Ian and Everitt, Nicola (2015) Nano-hardness and microstructure of selective laser melted AlSi10Mg scan tracks. In: Industrial Laser Applications Symposium (ILAS 2015), 17-18 March 2015, Kenilworth, UK.

2014

Aboulkhair, Nesma T., Everitt, Nicola M., Ashcroft, Ian and Tuck, Christopher (2014) Reducing porosity in AlSi10Mg parts processed by selective laser melting. Additive Manufacturing, 1-4 . pp. 77-86. ISSN 2214-8604

Abdi, Meisam, Wildman, Ricky and Ashcroft, Ian (2014) Evolutionary topology optimization using the extended finite element method and isolines. Engineering Optimization, 46 (5). pp. 628-647. ISSN 1029-0273