• Login
• Admin

2018

Jackson, George Anthony (2018) Influence of microstructure on the mechanical properties of thermally sprayed NiCoCrAlY coatings determined by small punch testing. PhD thesis, University of Nottingham.

Lunn, Geoffrey David (2018) Wire flame sprayed aluminium coatings onto polymer and CFRP substrates. PhD thesis, University of Nottingham.

2017

Hoey, Thomas Michael (2017) Evaluation of high temperature performance of the Co-Cr-C coated P92 steel. EngD thesis, University of Nottingham.

2015

Clark, John William Gordon (2015) Investigating chemical and microstructural evolution at dissimilar metal welds. EngD thesis, University of Nottingham.

2014

Abioye, Taiwo E. (2014) Laser deposition of Inconel 625/tungsten carbide composite coatings by powder and wire feedstock. PhD thesis, University of Nottingham.

Farayibi, Peter Kayode (2014) Laser cladding of Ti-6Al-4V with carbide and boride reinforcements using wire and powder feedstock. PhD thesis, University of Nottingham.

Li, Chunling (2014) Al-Co-Ce glass forming alloys and their corrosion behaviour. PhD thesis, University of Nottingham.

2013

Kyaw, Si Thu (2013) Finite element modelling of stresses and failure within plasma spray thermal barrier coating systems. PhD thesis, University of Nottingham.

2011

Hussain, Tanvir (2011) A study of bonding mechanisms and corrosion behaviour of cold sprayed coatings. PhD thesis, University of Nottingham.

Saeidi, Saman (2011) Microstructure, oxidation & mechanical properties of as-sprayed and annealed HVOF & VPS CoNiCrAIY coatings. PhD thesis, University of Nottingham.

Saghafifar, Hassan (2011) Microstructural stability of a nickel-based alloy overlay on a 2.25Cr1Mo steel substrate. PhD thesis, University of Nottingham.

2010

Chokethawai, Komsanti (2010) Microstructural evolution in Fe-Cr-B based alloy powder and thermally sprayed coatings and their wear performance. PhD thesis, University of Nottingham.

2009

Ding, Yi (2009) Effects of elevated temperature exposure on the microstructural evolution of Ni(Cr)-Cr3C2 coated 304 stainless steel. PhD thesis, University of Nottingham.

2005

Calla, Eklavya (2005) Cold gas spraying of copper and tin onto metallic and non metallic substrates. PhD thesis, University of Nottingham.

2004

Kong, Chang Jing (2004) Microstructural evolution in AISn-based gas atomised powder and thermally sprayed coatings. PhD thesis, University of Nottingham.

2001

Asbjornsson, Einar Jon (2001) Dispersion of grain refiner particles in molten aluminium. PhD thesis, University of Nottingham.