• Login
• Admin

Aboulkhair, Nesma T. (2016) Additive manufacture of an aluminium alloy: processing, microstructure, and mechanical properties. PhD thesis, University of Nottingham.

Afilaka, Daniel T. (2016) Avoiding the sintering of coal fired shallow fluidized beds. EngD thesis, University of Nottingham.

Al-Harahsheh, Mohammad (2005) A fundamental investigation into the microwave assisted leaching of sulphide minerals. PhD thesis, University of Nottingham.

Anbari, Hossein (2023) Microwave-assisted in-situ catalytic upgrading of heavy oil. PhD thesis, University of Nottingham.

Asbjornsson, Einar Jon (2001) Dispersion of grain refiner particles in molten aluminium. PhD thesis, University of Nottingham.

Ashton, Andrew R. (1989) Computer aided analysis and design of mine transportation systems. PhD thesis, University of Nottingham.

Aston, Timothy Robert Colin (1982) Hydrogeological aspects of rock mechanics and mining subsidence around longwall extractions. PhD thesis, University of Nottingham.

Avila, Claudio (2012) Predicting self-oxidation of coals and coal/biomass blends using thermal and optical methods. PhD thesis, University of Nottingham.

Azri, Mohammad Hazwan (2013) Accessing the extent of kerogen/bitumen interactions on source rock maturation and hydrocarbon generation. PhD thesis, University of Nottingham.

Bao, Jianguang (2021) Use of X-ray microtomography and full-field image correlation tools for the thermomechanical analysis of high temperature material behaviours. PhD thesis, University of Nottingham.

Bell, Katherine Jane (2008) Receptors for the extraction of the hexachloroplatinate anion. PhD thesis, University of Nottingham.

Bingley, R.M. (1990) Electronic theodolite intersection systems. PhD thesis, University of Nottingham.

Bolingbroke, Richard Kendall (1988) The growth of short fatigue cracks in titanium and aluminium alloys. PhD thesis, University of Nottingham.

Brown, Robert Alexander (2000) The combustion of titanium powder in air and iron oxide. PhD thesis, University of Nottingham.

Cassapi, V.B. (1987) Application of rock hardness and abrasive indexing to rock excavating equipment selection. PhD thesis, University of Nottingham.

Chan, Park Hinn (2017) Design study of composite repair system for offshore riser applications. PhD thesis, University of Nottingham.

Chen, Hui (1992) A study of tunnel stability with special reference to the effect of the stress field environment. PhD thesis, University of Nottingham.

Croston, Deborah Louise (2007) The effect of metal oxide additives on the hydrogen sorption behaviour of magnesium hydride. PhD thesis, University of Nottingham.

Dai, Jingru (2019) Process and reliability of die attachment by time-reduced sintering of nanosilver film. PhD thesis, University of Nottingham.

Dixon, Darron William (1992) A statistical analysis of monitored data for methane prediction. PhD thesis, University of Nottingham.

Du, Xi (2024) Performance of Ti-6Al-4V by laser powder bed fusion: powder feedstock and heat treatment considerations. PhD thesis, University of Nottingham.

Durucan, S. (1981) An investigation into the stress-permeability relationship of coals and flow patterns around working longwall faces. PhD thesis, University of Nottingham.

Ediz, I.G. (1991) An application of numerical methods to the prediction of strata methane flow in longwall mining. PhD thesis, University of Nottingham.

Fair, G.H. (1988) The effect of shot peening on fatigue and fretting-fatigue of aluminium alloys. PhD thesis, University of Nottingham.

Farayibi, Peter Kayode (2014) Laser cladding of Ti-6Al-4V with carbide and boride reinforcements using wire and powder feedstock. PhD thesis, University of Nottingham.

Fasheloum, Mohammed (1997) Investigation of drilling parameters indicators. PhD thesis, University of Nottingham.

Folorunso, Olaosebikan (2015) Microwave processing of vermiculite. PhD thesis, University of Nottingham.

Gollick, Michael John (1999) Optimising roadheader performance based on laboratory and field work. PhD thesis, University of Nottingham.

Hall, Neil Stewart (2017) An investigation into phosphoric iron production in Eastern England. PhD thesis, University of Nottingham.

Harris, John Richard (2002) Mathematical Modelling of Mechanical Alloying. PhD thesis, University of Nottingham.

Hasan, Muayad Mohammed (2018) Enhanced recovery of heavy oil using a catalytic process. PhD thesis, University of Nottingham.

Hastings, Philip John (1989) The behaviour of short fatigue cracks in a beta-processed titanium alloy. PhD thesis, University of Nottingham.

Howes, Michael (1992) The design and control of mine refrigeration systems. PhD thesis, University of Nottingham.

Ibrahim, Abubakr (2017) Experimental investigation of gas lift technique in viscous fluids. PhD thesis, University of Nottingham.

Igunnu, Ebenezer Temitope (2014) Treatment of produced water by simultaneous removal of heavy metals and dissolved polycyclic aromatic hydrocarbons in a photoelectrochemical cell. PhD thesis, University of Nottingham.

Jia, Yudan (2011) Numerical modelling of shaft lining stability. PhD thesis, University of Nottingham.

Jones, Dafydd Aled (2005) Understanding microwave treatment of ores. PhD thesis, University of Nottingham.

Kandasamy, Skanda Nathan (2020) Recommendations of marine seismic survey regulatory laws for the oil and gas industry in Malaysia. PhD thesis, University of Nottingham.

Katsikis, Spyros (2001) Effect of copper and magnesium on the precipitation characteristics of Al-Li-Mg, Al-Li-Cu and Al-Li-Cu-Mg alloys. PhD thesis, University of Nottingham.

Ketteman, Mark Robert (1985) The application of automated mine survey systems to mine surveying practice. PhD thesis, University of Nottingham.

Kobusheshe, Joseph (2010) Microwave enhanced processing of ores. PhD thesis, University of Nottingham.

Kuta, A.A. (2023) Characterising Land Cover Changes in the Niger Delta Caused by Oil Production. PhD thesis, University of Nottingham.

Lam Wing Cheong, Marc F. (2018) Experimental and numerical investigations into the behaviour of a 7175-T7351 aluminium alloy for aerospace gearbox housing applications at elevated temperatures. PhD thesis, University of Nottingham.

Li, Chunling (2014) Al-Co-Ce glass forming alloys and their corrosion behaviour. PhD thesis, University of Nottingham.

Li, Wei (2022) Impact of moisture on estimating gas in place for shales: characterisation and simulation studies on kerogens. PhD thesis, University of Nottingham.

Marshall, Christopher John (2013) Palaeogeographic development and economic potential of the coal-bearing palaeocene Todalen Member, Spitsbergen. PhD thesis, University of Nottingham.

Martin-Clave, Carla (2021) Impact of second phase content over rheological behaviour of rock salt under cyclic loading conditions applied to Underground Gas Storage. EngD thesis, University of Nottingham.

Mills, Jack (2000) A technical discussion of mining operations in the lime and cement industries of Zambia and Malawi. PhD thesis, University of Nottingham.

Moll, A.T.J. (1993) A study of optimisation methods applied to methane recovery and mine ventilation systems. PhD thesis, University of Nottingham.

Moloney, Kenneth W. (1997) An analysis of airflow patterns in auxiliary ventilated drivages. PhD thesis, University of Nottingham.

Naylor, A.W. (2016) The cultural and historical geographies of onshore oil exploration in the British East Midlands during the 20th century. PhD thesis, University of Nottingham.

Nuttall, P.A. (1973) Precipitation hardening in magnesium alloys. PhD thesis, University of Nottingham.

Ogunniran, Oluwatosin (2017) Microwave treatment of oil contaminated drill cuttings produced on offshore oil platforms. EngD thesis, University of Nottingham.

Pereira, Igor S. M. (2013) Microwave processing of oil contaminated drill cuttings. PhD thesis, University of Nottingham.

Pierce, Tobias J (2022) Soil bound lead (Pb) surrounding Snailbeach Lead Mine, Shropshire. MSc(Res) thesis, University of Nottingham.

Pitcher, Eleanor Grace (2021) Novel characterisation methods for pore systems of seal rocks in reservoirs used for downhole gas production and storage. PhD thesis, University of Nottingham.

Qin, Zhengyuan (2022) Understanding the controls and mechanisms of coal mining-induced ground movement using numerical modelling and InSAR analysis. PhD thesis, University of Nottingham.

Rabiu Ado, Muhammad (2017) Numerical simulation of heavy oil and bitumen recovery and upgrading techniques. PhD thesis, University of Nottingham.

Ragab, Raheeg (2024) Computational modelling of creep and cyclic visco-plasticity damage of CSEF steels at elevated temperatures. PhD thesis, University of Nottingham.

Reed, S.M. (1986) Groundwater recovery problems associated with opencast mine backfills. PhD thesis, University of Nottingham.

Rowsell, Philip J. (1991) The automatic optimisation of drilling performance. PhD thesis, University of Nottingham.

Schofield, Damian (1992) Surface mine design using intelligent computer techniques. PhD thesis, University of Nottingham.

Silvester, Stephen (2002) The integration of CFD and VR methods to assist auxiliary ventilation practice. PhD thesis, University of Nottingham.

Soejadi, Prijoko Prajitnoadi (2018) Participatory ergonomics in Indonesian tin mining. PhD thesis, University of Nottingham.

Spencer, L. (1984) Selective flocculation of coal and shale. PhD thesis, University of Nottingham.

Tang, Luyao (2019) CO2-enhanced catalytic processing of oil shale. PhD thesis, University of Nottingham.

Vallance, Simon (2009) Microwave synthesis and mechanistic examination of the transition metal carbides. PhD thesis, University of Nottingham.

Walsha, Timothy (1999) The application of virtual reality to the simulation of mine fires and explosions. PhD thesis, University of Nottingham.

Wang, Jun (2005) The stress-strain and strength characteristics of Portaway Sand. PhD thesis, University of Nottingham.

Wardle, Peter (2011) The selective heating of pyrite in coal using microwave energy. PhD thesis, University of Nottingham.

Watson, Andrew Gordon (1981) The contribution of conveyed coal to mine heat problems. PhD thesis, University of Nottingham.

Watt, Alan William (1987) The movement of gases in longwall coalface wastes liable to spontaneous combustion. PhD thesis, University of Nottingham.

Whitaker, Iain Robert (1994) The structure and properties of autogenous laser beam welds in aluminium alloys. PhD thesis, University of Nottingham.

Whittles, David N. (2000) The application of rock mass classification principles to coal mine design. PhD thesis, University of Nottingham.

Williams, Matthew James (2000) Application of virtual reality for risk assessment and training in the minerals industry. PhD thesis, University of Nottingham.

Xu, Guangquan (2007) Wellbore stability in geomechanics. PhD thesis, University of Nottingham.

Yury, Derbin (2019) Numerical modelling of surface subsidence induced by underground coal gasification. PhD thesis, University of Nottingham.

Zhao, Ge (2020) Processing of open-cell structures by additive manufacturing technique of metal and salt mixtures. MPhil thesis, University of Nottingham.

Zhao, Xuelei (2023) Investigations into Two New Variants of the Hybrid Incremental Sheet Forming Processes. PhD thesis, University of Nottingham.

Ziegelmeier, Stefan (2016) Process analysis and material behavior of thermoplastic elastomers throughout the laser sintering processing chain. PhD thesis, University of Nottingham.

Zou, Zhiyi (2020) Refinement of the grain structure of selective laser melted Ti-6Al-4V via induction heat treatment. PhD thesis, University of Nottingham.