Number of items at this level: 67.
A
Abd-Alhamid, Fedaa Tawfiq
(2020)
Development of a view perception quantifying method for a holistic window performance assessment using a virtual environment.
PhD thesis, University of Nottingham.
Abdelsalam, Ahmed Ehab
(2023)
Resilient design for London's elevated social spaces: exploring challenges, opportunities, and harnessing interactive virtual reality co-design approaches for community engagement.
PhD thesis, University of Nottingham.
Aditra, Rakhmat Fitranto
(2024)
Development of novel soft pneumatic adaptive system using switching mechanism.
PhD thesis, University of Nottingham.
Afrin, Sabrina
(2017)
Thermal performance analysis of ETFE-foil panels and spaces enclosed with ETFE-foil cushion envelope.
PhD thesis, University of Nottingham.
B
Bailey, David
(2016)
A performance evaluation of mainstream timber framed and traditional masonry housing in the UK.
PhD thesis, University of Nottingham.
Bakri, Miassar
(2022)
Indoor air quality in low carbon buildings in the United Kingdom.
PhD thesis, University of Nottingham.
Binti Ab Rashid, Nor Syahila
(2020)
The adaptive reuse of obsolete shophouses in the core zone of Melaka, Malaysia as boutique hotels.
PhD thesis, University of Nottingham.
C
Chen, Chao
(2019)
Heterogeneous integration of BIM with low-cost indoor mobile laser scanning method for building fabric maintenance in China.
PhD thesis, University of Nottingham.
D
DU, Bo-Yu
(2018)
A case study on thermal comfort in maternity hospital in Beijing.
MRes thesis, University of Nottingham.
Decruz, Aloysius
(2016)
Development and integration of a green roof model within whole building energy simulation.
PhD thesis, University of Nottingham.
E
Elbasuney, Sherif
(2013)
Enhanced flame retardant polymer nanocomposites.
PhD thesis, University of Nottingham.
Evans, Hywel F.J.
(2016)
Construction material classification using multi-spectral terrestrial laser scanning.
PhD thesis, University of Nottingham.
F
Fadoul, Abdelaziz
(2020)
A BIM-based model for constructability assessment of buildings design.
PhD thesis, University of Nottingham.
Fahdah, Ibrahim
(2008)
Distributed IT for integration and communication of engineering information for collaborative building design.
PhD thesis, University of Nottingham.
Fang, Fang
(2020)
BIM application to enhance the quality of project management for building owners and developers.
MRes thesis, University of Nottingham.
Flor, Jan-Frederik
(2021)
Switchable ETFE façades: A study on the thermo-optical, daylighting and energy performance of climate adaptive building envelopes.
PhD thesis, University of Nottingham.
Frank, Owajionyi L.
(2014)
Exploring a best practice approach to operability and maintainability of low carbon buildings in the UK.
PhD thesis, University of Nottingham.
G
GAO, Jianchao
(2018)
Integrating sustainable building technologies in public toilets design—a case of container toilet in Ningbo, China.
MRes thesis, University of Nottingham.
Ghabra, Noura
(2018)
Energy efficient strategies for the building envelope of residential tall buildings in Saudi Arabia.
PhD thesis, University of Nottingham.
H
Haredy, Abdullah
(2016)
Simulation of photovoltaic airflow windows for indoor thermal and visual comfort and electricity generation.
PhD thesis, University of Nottingham.
Hart, Robert
(2006)
Numerical modelling of tunnel fires and water mist suppression.
PhD thesis, University of Nottingham.
Hong, Yuanda
(2021)
Energy, environmental, economic retrofit framework for low-rise office buildings in Shanghai: a multi-objective decision-making approach.
PhD thesis, University of Nottingham.
Hormazábal Poblete, Nina A.
(2013)
Post occupancy evaluation of homes in the United Kingdom to develop an affordable P.O. methodology for homes in Chile.
PhD thesis, University of Nottingham.
I
Ibraheem, Omar
(2018)
The feasibility of Passive Downdraught Evaporative Cooling (PDEC) of multi-storey office buildings in Cairo - a modelling study.
PhD thesis, University of Nottingham.
J
Jaly Zada, Aras Jalal
(2016)
Versioning of IFC-based information models for collaborative design.
PhD thesis, University of Nottingham.
K
Kilaire, Aneel
(2012)
Design of an integrated passive and active double facade system for UK offices.
PhD thesis, University of Nottingham.
Krimly, Salah
(2020)
Prospects for improvement in the design of residential buildings in Jeddah integrating passive ventilation systems and enhanced family interaction.
PhD thesis, University of Nottingham.
L
Lawson, Glyn
(2011)
Predicting human behaviour in emergencies.
PhD thesis, University of Nottingham.
Liang, Runqi
(2018)
Development of an adaptive façade for visual comfort, daylight and thermal control element.
PhD thesis, University of Nottingham.
Liu, Pei-Chun
(2012)
A modelling study of segmentation of naturally ventilated tall office buildings in a hot and humid climate.
PhD thesis, University of Nottingham.
M
Marinho de Castro, Maria Manuela
(2017)
Energy saving potential of ground integrated architecture on slope terrains.
PhD thesis, University of Nottingham.
Mat Wajid, Norhayati
(2016)
Investigation of a novel thermochemical heat storage systems for building applications.
PhD thesis, University of Nottingham.
Mert Cuce, Ayse Pinar
(2016)
Innovative heating, cooling and ventilation technologies for low-carbon buildings.
PhD thesis, University of Nottingham.
Morgan, David Charles
(1986)
Site layout and construction planning.
PhD thesis, University of Nottingham.
Mori, Hiromi
(2010)
Enhancement of heat transfer for ground source heat pump systems.
PhD thesis, University of Nottingham.
Mularczyk, Ragnar
(2024)
Investigating the potential for green roofing in Nottingham, UK.
MRes thesis, University of Nottingham.
Musa, Mu'azu
(2009)
Novel evaporative cooling systems for building applications.
PhD thesis, University of Nottingham.
O
Omer, Abdeen Mustafa
(2012)
Performance analysis of ground source heat pumps for buildings applications.
PhD thesis, University of Nottingham.
Osorio-Sandoval, Carlos Arturo
(2021)
BIM-based construction simulation modelling.
PhD thesis, University of Nottingham.
Oti, Akponanabofa Henry
(2014)
Building information modelling for sustainability appraisal of conceptual design of steel-framed buildings.
PhD thesis, University of Nottingham.
P
Peng, Zhen
(2019)
An integrated low-energy ventilation system to improve indoor air quality and thermal comfort of primary school buildings in the cold climate zone of China.
PhD thesis, University of Nottingham.
R
Rodrigues, Lucélia Taranto
(2010)
An investigation into the use of thermal mass to improve comfort in British housing.
PhD thesis, University of Nottingham.
Russell, Justin
(2015)
Progressive collapse of reinforced concrete flat slab structures.
PhD thesis, University of Nottingham.
S
Salas castillo, Manlio
(2021)
Smart window photovoltaic concentrator for energy generation and solar control.
PhD thesis, University of Nottingham.
Sanzana, Mirza Rayana
(2024)
Charging water load prediction with a multilayer perceptron for an efficient facility management and maintenance of thermal-energy-storage air-conditioning.
PhD thesis, University of Nottingham.
Shao, Jingjing
(2015)
Development of a novel energy efficient phase change emulsion for air conditioning systems.
PhD thesis, University of Nottingham.
Shao, Jingjing
(2015)
Development of a novel energy efficient phase change emulsion for air conditioning systems.
PhD thesis, University of Nottingham.
Sharpe, Patrick
(2023)
Characterising natural ventilation through open windows in the presence of wind: a theoretical and experimental investigation into the interaction between window geometry and environmental forces, and its application to envelope flow models of natural ventilation.
PhD thesis, University of Nottingham.
Siebert, Michael
(2019)
Concrete and the barriers to innovation in UK housebuilding.
PhD thesis, University of Nottingham.
Sufeljen, Abdusalam
(2014)
Microclimate and thermal comfort of public enclosed courtyards in hot dry regions, with special reference to Tripoli, Libya.
PhD thesis, University of Nottingham.
Sun, Jing
(2021)
Green infrastructure design and evaluation model for resilient sponge city program transitional construction.
PhD thesis, University of Nottingham.
T
Tene Nengou, Claude B.
(2019)
Framework for the effective implementation of building regulations and policies – the case of Sub-Sahara African countries.
PhD thesis, University of Nottingham.
Thaicham, Pruitipong.
(2004)
Fluidised-MCPCM glazed energy storage system.
PhD thesis, University of Nottingham.
Tian, Meng
(2018)
A study on the use of three-dimensional dielectric crossed compound parabolic concentrator for daylighting control application.
PhD thesis, University of Nottingham.
W
Wang, Xinru
(2021)
Performance study of a PV/T assisted air source heat pump system with a novel absorber in solar collector.
PhD thesis, University of Nottingham.
Wate, Parag
(2020)
Emulation based uncertainty and sensitivity analysis for complex building performance simulation.
PhD thesis, University of Nottingham.
Wei, Yixuan
(2019)
Data-driven approaches for analysis of building energy consumption and indoor occupancy behavior.
PhD thesis, University of Nottingham.
White, Jennifer A.
(2014)
An investigation into the parameters that contribute to the gap between the designed and as-built thermal performance
of British housing.
PhD thesis, University of Nottingham.
X
Xie, Fei
(2011)
A novel clear foil cushion construction incorporating an additional water layer.
PhD thesis, University of Nottingham.
Xu, Haipeng
(2019)
The use of PCMs for free cooling in buildings.
PhD thesis, University of Nottingham.
Y
Yan, Feng
(2016)
The use of passive damping to increase sound insulation in buildings.
PhD thesis, University of Nottingham.
Yin, Mengtian
(2019)
Elevation recognition in architecture drawings for 3D converting to BIM models.
MRes thesis, University of Nottingham.
Yu, Xu
(2015)
Investigation of a novel multifunctional roof panel for hybrid photovoltaic/thermal/daylight application in atrium and large green house.
PhD thesis, University of Nottingham.
Z
Zhang, Shihao
(2022)
The development of a low carbon prefabricated house.
PhD thesis, University of Nottingham.
Zhang, Yining
(2019)
Integrating BIM and Feng shui for the assessment of user
experience.
MRes thesis, University of Nottingham.
Zheng, Tianhong
(2023)
Investigation into sustainable technologies for mitigating urban heat island effects in subtropical monsoon climate.
PhD thesis, University of Nottingham.
Zheng, Xuesen
(2023)
Assessing the adaptive reuse of old industrial buildings:
applying Maslow’s hierarchy of needs and fuzzy comprehensive evaluation method.
PhD thesis, University of Nottingham.
This list was generated on Tue Dec 3 17:01:52 2024 UTC.