Browse by Authors and Editors

Up a level
Export as [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | Date | No Grouping
Number of items: 68.

LIU, Qianyu, Kwong, Chiew Foong, Sun, Wei, Li, Lincan and Zhao, Haoyu (2020) Reinforcement learning based adaptive handover in ultra-dense cellular networks with small cells. In: International Symposium on Artificial Intelligence and Robotics 2020, 8 August 2020-10 August 2020, Kitakyushu,Japan.

Morris, A., Cacciapuoti, B. and Sun, Wei (2019) The role of hardness on condition monitoring and lifing for high temperature power plant structural risk management. Measurement, 131 . pp. 501-512. ISSN 0263-2241

Chen, H., Rushworth, Adam, Sun, Wei, He, J. and Guo, H. (2018) Some considerations in using the small punch testing for thermally sprayed CoNiCrAlY coatings. Surface and Coatings Technology, 357 . pp. 684-690. ISSN 1879-3347

Sun, Wei (2018) The role of hardness on condition monitoring and lifing for power plant structure risk management. Measurement, 131 . pp. 501-512.

Benaarbia, Adil, Rouse, James Paul and Sun, Wei (2018) A thermodynamically-based viscoelastic-viscoplastic model for the high temperature cyclic behaviour of 9-12% Cr steels. International Journal of Plasticity, 107 . pp. 100-121. ISSN 0749-6419

Kang, Ji Jun, Becker, Adib A., Wen, Wu and Sun, Wei (2018) Extracting elastic-plastic properties from experimental loading-unloading indentation curves using different optimization techniques. International Journal of Mechanical Sciences, 144 . pp. 102-109. ISSN 0020-7403

Cacciapuoti, Bianca, Morris, A., Sun, Wei, McCartney, D.G. and Hulance, J. (2018) Correlation and capability of using site inspection data and small specimen creep testing for a service-exposed CrMoV pipe section. Materials at High Temperatures . ISSN 1878-6413 (In Press)

Al-Owaisi, Sultan, Becker, Adib A., Sun, Wei, Al-Shabibi, Abdullah, Al-Moharbi, Majid, Pervez, Tasneem and Al-Salmi, Hussain (2018) An experimental investigation of the effect of defect shape and orientation on the burst pressure of pressurised pipes. Engineering Failure Analysis . ISSN 1350-6307 (In Press)

Niu, Jie, Choo, Hui Leng, Sun, Wei and Mok, Sui Him (2018) Analytical solution and experimental study of effective Young’s modulus of SLM-fabricated lattice structure with triangular unit cells. Journal of Manufacturing Science and Engineering, 140 (9). 091008. ISSN 1528-8935

Benaarbia, Adil, Xu, Xu, Sun, Wei, Becker, Adib and Jepson, Mark (2018) Investigation of short-term creep deformation mechanisms in MarBN steel at elevated temperatures. Materials Science and Engineering: A, 734 . pp. 491-505. ISSN 0921-5093

Salerno, Gervasio, Bennett, Chris, Sun, Wei and Becker, Adib A. (2018) An experimental and numerical investigation on the process efficiency of the focused TIG welding of Inconel 718 thick plates. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture . ISSN 2041-2975 (In Press)

Salerno, Gervasio, Bennett, Chris, Sun, Wei, Becker, Adib, Palumbo, Nunzio, Kelleher, Joe and Zhang, Shu Yan (2018) On the interaction between welding residual stresses: a numerical and experimental investigation. International Journal of Mechanical Sciences . ISSN 0020-7403 (In Press)

Qin, W., Jin, X., Kirk, A., Shipway, P.H. and Sun, Wei (2018) Effects of surface roughness on local friction and temperature distributions in a steel-on-steel fretting contact. Tribology International, 120 . pp. 350-357. ISSN 1879-2464

Benaarbia, Adil, Rae, Y. and Sun, Wei (2018) Unified viscoplasticity modelling and its application to fatigue-creep behaviour of gas turbine rotor. International Journal of Mechanical Sciences, 136 . pp. 36-49. ISSN 0020-7403

Brett, S.J., Dyson, C.N.C., Purdy, D., Shingledecker, J., Rantala, J., Eaton-Mckay, J. and Sun, Wei (2018) Impression creep test of a P91 steel: a round robin programme. Materials at High Temperatures, 35 (1). pp. 529-534. ISSN 1878-6413

Xu, Jie, Wu, Tao, Sun, Wei and Peng, Chuang (2017) Characterization on insulation performance, poststability, and foaming process of rigid polyurethane sandwich panel for cold storage warehouse. Journal of Materials in Civil Engineering, 29 (9). 04017138. ISSN 1943-5533

Jin, X., Shipway, P.H. and Sun, Wei (2017) The role of temperature and frequency on fretting wear of a like-on-like stainless steel contact. Tribology Letters, 65 . 77/1-77/15. ISSN 1573-2711

Chen, Hao, Jackson, G.A. and Sun, Wei (2017) An overview of using small punch testing for mechanical characterization of MCrAlY bond coats. Journal of Thermal Spray Technology, 26 (6). pp. 1222-1238. ISSN 1544-1016

Niu, Jie, Choo, Hui Leng, Sun, Wei and Mok, Sui Him (2017) Numerical study on load-bearing capabilities of beam-like lattice structures with three different unit cells. International Journal of Mechanics & Materials in Design . ISSN 1573-8841

Cacciapuoti, B., Sun, Wei, McCartney, D.G., Morris, A., Lockyer, S., Ab Razak, N., Davies, C.M. and Hulance, J. (2017) An evaluation of the capability of data conversion of impression creep test. Materials at High Temperatures, 34 (5-6). ISSN 1878-6413

Morris, A., Cacciapuoti, B. and Sun, Wei (2017) The role of small specimen creep testing within a life assessment framework for high temperature power plant. International Materials Reviews, 63 (2). pp. 102-137. ISSN 1743-2804

Xu, Jie, Wu, Tao, Zhang, Jianwei, Chen, Hao, Sun, Wei and Peng, Chuang (2017) Microstructure measurement and microgeometric packing characterization of rigid polyurethane foam defects. Cellular Polymers, 36 (4). pp. 183-204. ISSN 0262-4893

Cortellino, Francesco, Sun, Wei, Rouse, James Paul, Cacciapuoti, B. and Hyde, T.H. (2017) Experimental and numerical analysis of initial plasticity in P91 steel small punch creep samples. Experimental Mechanics, 57 (8). pp. 1193-1212. ISSN 1741-2765

Xu, Jie, Wu, Tao, Sun, Wei and Peng, Chuang (2017) Generalization and modelling of rigid polyisocyanurate foam reaction kinetics, structural units effect, and cell configuration mechanism. Cellular Polymers, 36 (6). pp. 285-312. ISSN 0262-4893

Lu, J., Campbell-Brown, A., Tu, Shan-Tung and Sun, Wei (2017) Determination of creep damage properties from miniature thin beam bending using an inverse approach. Key Engineering Materials, 734 . pp. 260-272. ISSN 1662-9795

Hyde, Christopher J., Hyde, Thomas H. and Sun, Wei (2017) Small ring testing of high temperature materials. Key Engineering Materials, 734 . pp. 168-175. ISSN 1662-9795

Jackson, G.A., Sun, Wei and McCartney, D.G. (2017) The application of the small punch tensile test to evaluate the ductile to brittle transition of a thermally sprayed CoNiCrAlY coating. Key Engineering Materials, 734 . pp. 144-155. ISSN 1662-9795

Jackson, G.A., Chen, H., Sun, Wei and McCartney, D.G. (2017) The high temperature creep properties of a thermally sprayed CoNiCrAlY coating via small punch creep testing. Key Engineering Materials, 734 . pp. 37-48. ISSN 1662-9795

Hashim, Atheer, Kyaw, Si and Sun, Wei (2017) Modelling fracture of aged graphite bricks under radiation and temperature. Nuclear Materials and Energy, 11 . pp. 3-11. ISSN 2352-1791

Sun, Wei and Choo, Hui Leng (2017) Finite element analysis and experimental study of plastic lattice structures manufactured by selective laser sintering. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 231 (1-2). pp. 171-178. ISSN 2041-3076

Mohd Tobi, A.L., Sun, Wei and Shipway, P.H. (2017) Evolution of plasticity-based wear damage in gross sliding fretting of a Ti-6Al-4V non-conforming contact. Tribology International, 113 . pp. 474-486. ISSN 1879-2464

Tobi, A.L. Mohd, Sun, Wei and Shipway, P.H. (2016) Investigation on the plasticity accumulation of Ti-6Al-4V fretting wear by decoupling the effects of wear and surface profile in finite element modelling. Tribology International . ISSN 1879-2464

Salerno, Gervasio, Bennett, Chris, Sun, Wei and Becker, Adib A. (2016) FE modelling strategies of weld repair in pre-stressed thin components. Journal of Strain Analysis for Engineering Design, 51 (8). pp. 582-597. ISSN 2041-3130

Jin, X., Sun, Wei and Shipway, P.H. (2016) The role of geometry changes and debris formation associated with wear on the temperature field in fretting contacts. Tribology International, 102 . pp. 392-406. ISSN 1879-2464

Al Owaisi, S.S., Becker, Adib A. and Sun, Wei (2016) Analysis of shape and location effects of closely spaced metal loss defects in pressurised pipes. Engineering Failure Analysis, 68 . pp. 172-186. ISSN 1350-6307

Salerno, Gervasio, Bennett, Chris, Sun, Wei and Becker, Adib A. (2016) Finite element modelling strategies of weld repair in pre-stressed thin components. Journal of Strain Analysis for Engineering Design, 51 (8). pp. 582-597. ISSN 2041-3130

Kyaw, Si Thu, Rouse, James Paul, Lu, Jiawa and Sun, Wei (2016) Determination of material parameters for a unified viscoplasticity-damage model for a P91 power plant steel. International Journal of Mechanical Sciences, 115-116 . pp. 168-179. ISSN 0020-7403

Kyaw, Si Thu, Rouse, James Paul, Lu, J. and Sun, Wei (2016) Effects of surface roughness on thermo-mechanical fatigue life of a P91 power plant steel. Procedia Structural Integrity, 2 . pp. 664-672. ISSN 2452-3216

Saad, Abdullah Aziz, Sun, Wei and Tobi, A.L. Mohd (2016) Multiaxial viscoplasticity modelling of power plant steel. Key Engineering Materials, 701 . pp. 230-234. ISSN 1662-9795

Salerno, Gervasio, Bennett, Chris, Sun, Wei and Becker, Adib A. (2016) Numerical simulation of residual stresses induced by weld repair in a stainless steel pipe considering the influence of an initial fabrication weld. In: 10th International Conference on Residual Stresses (ICRS-10), 3-7 July 2016, Sydney, Australia. (Submitted)

Cortellino, Francesco, Sun, Wei and Hyde, T.H. (2016) On the effects of friction modelling on small punch creep test responses: a numerical investigation. Journal of Strain Analysis for Engineering Design, 51 (7). pp. 493-506. ISSN 2041-3130

Cacciapuoti, B., Sun, Wei and McCartney, D.G. (2016) A study on the evolution of the contact angle of small punch creep test of Ductile materials. International Journal of Pressure Vessels and Piping . ISSN 0308-0161

Tu, Shan-Tung, Zhuang, Fa-Kun, Zhou, Guo-Yan and Sun, Wei (2016) Effect of large deformation on creep property evaluation by small-specimen bending tests. International Journal of Pressure Vessels and Piping, 139-140 . pp. 194-203. ISSN 0308-0161

Balhassn, S.M. Ali, Hyde, T.H. and Sun, Wei (2016) Small two-bar specimen creep testing of Grade P91 steel at 650oC. High Temperature Materials and Processes, 35 (3). pp. 243-252. ISSN 2191-0324

Saber, Mohammed, Sun, Wei and Hyde, T.H. (2016) Numerical study of the effects of crack location on creep crack growth in weldment. Engineering Fracture Mechanics, 154 . pp. 72-82. ISSN 0013-7944

Craddock Dyson, Charles, Sun, Wei, Hyde, Christopher J., Brett, Steve J. and Hyde, Thomas H. (2016) Use of small specimen creep data in component life management: a review. Materials Science and Technology . ISSN 0267-0836

Iracheta, Omar, Bennett, Chris and Sun, Wei (2016) Characterisation of material property variation across an inertia friction welded CrMoV steel component using the inverse analysis of nanoindentation data. International Journal of Mechanical Sciences, 107 . pp. 253-263. ISSN 0020-7403

Lu, Jiawa, Sun, Wei and Becker, Adib A. (2016) Material characterization and finite element modelling of cyclic plasticity behavior for 304 stainless steel using a crystal plasticity model. International Journal of Mechanical Sciences, 105 . pp. 315-329. ISSN 0020-7403

Xu, Lei, Zhang, Shu-Yan, Sun, Wei, McCartney, David G., Hyde, Thomas H., James, Jon and Drakopoulos, Michael (2015) Residual stress distribution in a Ti-6Al-4V T-joint weld measured using synchrotron X-ray diffraction. The Journal of Strain Analysis for Engineering Design, 50 (7). pp. 445-454. ISSN 0309-3247

Lu, Jiawa, Sun, Wei, Becker, Adib A. and Saad, Abdullah Aziz (2015) Simulation of the fatigue behaviour of a power plant steel with a damage variable. International Journal of Mechanical Sciences, 100 . pp. 145-157. ISSN 0020-7403

Iracheta, Omar, Bennett, Chris and Sun, Wei (2015) A sensitivity study of parameters affecting residual stress predictions in finite element modelling of the inertia friction welding process. International Journal of Solids and Structures, 71 . pp. 180-193. ISSN 0020-7683

Kang, JiJun, Becker, Adib A. and Sun, Wei (2015) Determination of elastic and viscoplastic material properties obtained from indentation tests using a combined finite element analysis and optimization approach. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 229 (3). pp. 175-188. ISSN 2041-3076

Sun, Wei (2015) Effects of compositions of filler, binder and porosity on elastic and fracture properties of nuclear graphite. Journal of Nuclear Materials, 457 . pp. 42-47. ISSN 0022-3115

Wadsworth, M., Kyaw, Si Thu and Sun, Wei (2014) Finite element modelling of the effect of temperature and neutron dose on the fracture behaviour of nuclear reactor graphite bricks. Nuclear Engineering and Design, 280 . pp. 1-7. ISSN 0029-5493

Hyde, Christopher J., Sun, Wei, Hyde, T.H., Rouse, J.P., Farragher, T., O'Dowd, Noel P. and Leen, S.B. (2014) Cyclic viscoplasticity testing and modeling of a service-aged P91 steel. Journal of Pressure Vessel Technology, 136 (4). 044501/1-044501/5. ISSN 1528-8978

Hyde, T. H., Hyde, Christopher J. and Sun, Wei (2014) A basis for selecting the most appropriate small specimen creep test type. Journal of Pressure Vessel Technology, 136 (2). 024502/1-024502/6. ISSN 1528-8978

Hyde, Christopher J., Sun, Wei, Hyde, Thomas H., Saber, Mohammed and Becker, Adib A. (2014) Application of the Liu and Murakami damage model for creep crack growth predictions in power plant steels. In: Computational and Numerical Simulations. InTech, Rieka, Croatia, pp. 175-189. ISBN 9789535112204

Bennett, Chris and Sun, Wei (2014) Optimisation of material properties for the modelling of large deformation manufacturing processes using a finite element model of the Gleeble compression test. Journal of Strain Analysis for Engineering Design, 49 (6). pp. 429-436. ISSN 2041-3130

Hyde, Christopher J., Hyde, T.H., Sun, Wei, Nardone, S. and De Bruycker, E. (2013) Small ring testing of a creep resistant material. Materials Science and Engineering: A, 586 . pp. 358-366. ISSN 0921-5093

Rouse, James Paul, Hyde, Christopher J., Sun, Wei and Hyde, T.H. (2013) Comparison of several optimisation strategies for the determination of material constants in the Chaboche visco-plasticity model. Journal of Strain Analysis for Engineering Design, 48 (6). pp. 347-363. ISSN 2041-3130

Hyde, Thomas H., Hyde, Christopher J. and Sun, Wei (2013) Theoretical basis and practical aspects of small specimen creep testing. Journal of Strain Analysis for Engineering Design, 48 (2). pp. 112-125. ISSN 2041-3130

Hyde, Christopher J., Sun, Wei and Hyde, T.H. (2011) An investigation of the failure mechanisms in high temperature materials subjected to isothermal and anisothermal fatigue and creep conditions. Procedia Engineering, 10 . pp. 1157-1162. ISSN 1877-7058

Saad, A.A., Hyde, Christopher J., Sun, Wei and Hyde, T.H. (2011) Thermal-mechanical fatigue simulation of a P91 steel in a temperature range of 400–600°C. Materials at High Temperatures, 28 (3). pp. 212-218. ISSN 1878-6413

Hyde, Christopher J., Hyde, T.H., Sun, Wei and Becker, A.A. (2010) Damage mechanics based predictions of creep crack growth in 316 stainless steel. Engineering Fracture Mechanics, 77 (12). pp. 2385-2402. ISSN 0013-7944

Hyde, T H., Stoyanov, M, Sun, Wei and Hyde, Christopher J. (2010) On the interpretation of results from small punch creep tests. Journal of Strain Analysis for Engineering Design, 45 (3). pp. 141-164. ISSN 2041-3130

Hyde, Christopher J., Sun, Wei and Hyde, T.H. (2010) A novel method for obtaining the multiaxiality constant for damage mechanics which is appropriate to crack tip conditions. Journal of Energy and Power Engineering . pp. 129-138. ISSN 1934-8983

Gong, Y.P., Hyde, Christopher J., Sun, Wei and Hyde, T.H. (2009) Determination of material parameters in the chaboche unified viscoplasticty model. Applied Mechanics and Materials, 16-19 . pp. 955-959. ISSN 1662-7482

Sun, Wei (1996) Creep of service-aged welds. PhD thesis, University of Nottingham.

This list was generated on Thu Mar 28 22:32:23 2024 UTC.