• Login
• Admin

Article

Thompson, Adam, Senin, Nicola, Maskery, Ian and Leach, Richard (2018) Effects of magnification and sampling resolution in X-ray computed tomography for the measurement of additively manufactured metal surfaces. Precision Engineering, 53 . pp. 54-64. ISSN 0141-6359

Saint, Reece, Evans, William, Zhou, Yijia, Barrett, Thomas J., Fromhold, T.M., Saleh, Ehab, Maskery, Ian, Tuck, Christopher, Wildman, Ricky D., Orucevic, Fedja and Krüger, Peter (2018) 3D-printed components for quantum devices. Scientific Reports, 8 . p. 8368. ISSN 2045-2322

Maskery, Ian, Aboulkhair, Nesma T., Aremu, A.O., Tuck, Christopher and Ashcroft, Ian (2018) Compressive failure modes and energy absorption in additively manufactured double gyroid lattices. Additive Manufacturing, 16 . pp. 24-29. ISSN 2214-8604

Zhang, Yuwu, Liu, Tao, Ren, Huan, Maskery, Ian and Ashcroft, Ian (2018) Dynamic compressive response of additively manufactured AlSi10Mg alloy hierarchical honeycomb structures. Composite Structures . ISSN 1879-1085 (In Press)

Thompson, Adam, Senin, Nicola, Maskery, Ian, Körner, Lars, Lawes, Simon and Leach, Richard (2018) Internal surface measurement of metal powder bed fusion parts. Additive Manufacturing, 20 . pp. 126-133. ISSN 2214-8604

Maskery, Ian, Sturm, L., Aremu, Adedeji, Panesar, Ajit, Williams, C.B., Tuck, Christopher, Wildman, Ricky D., Ashcroft, Ian and Hague, Richard J.M. (2017) Insights into the mechanical properties of several triply periodic minimal surface lattice structures made by polymer additive manufacturing. Polymer . ISSN 0032-3861

Xu, Zhengkai, Hyde, Christopher J., Thompson, Adam, Leach, Richard K., Maskery, Ian, Tuck, Christopher and Clare, Adam T. (2017) Staged thermomechanical testing of nickel superalloys produced by selective laser melting. Materials & Design, 133 . pp. 520-527. ISSN 0264-1275

Syam, Wahyudin P., Jianwei, Wu, Zhao, Bo, Maskery, Ian, Elmadih, Waiel and Leach, Richard (2017) Design and analysis of strut-based lattice structures for vibration isolation. Precision Engineering . ISSN 0141-6359 (In Press)

Thompson, Adam, McNally, Donal, Maskery, Ian and Leach, Richard K. (2017) X-ray computed tomography and additive manufacturing in medicine: a review. International Journal of Metrology and Quality Engineering, 8 . 17/1-17/15. ISSN 2107-6847

Aboulkhair, Nesma T., Everitt, Nicola M., Maskery, Ian, Ashcroft, Ian and Tuck, Chris (2017) Selective laser melting of aluminium alloys. MRS Bulletin, 42 (4). pp. 311-319. ISSN 1938-1425

Faludi, Jeremy, Baumers, Martin, Maskery, Ian and Hague, Richard (2016) Environmental impacts of selective laser melting: do printer, powder, or power dominate? Journal of Industrial Ecology . ISSN 1530-9290

Aboulkhair, Nesma T., Maskery, Ian, Tuck, Christopher, Ashcroft, Ian and Everitt, Nicola M. (2016) Improving the fatigue behaviour of a selectively laser melted aluminium alloy: influence of heat treatment and surface quality. Materials & Design, 104 . pp. 174-182. ISSN 0264-1275

Maskery, Ian, Aboulkhair, N.T., Aremu, Adedeji, Tuck, Christopher, Ashcroft, Ian, Wildman, Ricky D. and Hague, Richard J.M. (2016) A mechanical property evaluation of graded density Al-Si10-Mg lattice structures manufactured by selective laser melting. Materials Science and Engineering: A, 670 . pp. 264-274. ISSN 0921-5093

Aboulkhair, Nesma T., Maskery, Ian, Tuck, Christopher, Ashcroft, Ian and Everitt, Nicola M. (2016) The microstructure and mechanical properties of selectively laser melted AlSi10Mg: The effect of a conventional T6-like heat treatment. Materials Science and Engineering: A, 667 . pp. 139-146. ISSN 0921-5093

Thompson, Adam, Maskery, Ian and Leach, Richard K. (2016) X-ray computed tomography for additive manufacturing: a review. Measurement Science and Technology, 27 (7). 072001/1-072001/17. ISSN 1361-6501

Aboulkhair, Nesma T., Maskery, Ian, Tuck, Christopher, Ashcroft, Ian and Everitt, Nicola M. (2016) On the formation of AlSi10Mg single tracks and layers in selective laser melting: microstructure and nano-mechanical properties. Journal of Materials Processing Technology, 230 . pp. 88-98. ISSN 0924-0136

Maskery, Ian, Hussey, Alexandra, Panesar, Ajit, Aremu, Adedeji, Tuck, Christopher, Ashcroft, Ian and Hague, Richard J.M. (2016) An investigation into reinforced and functionally graded lattice structures. Journal of Cellular Plastics . ISSN 0021-955X

Everitt, Nicola M, Aboulkhair, Nesma T., Maskery, Ian, Tuck, Christopher and Ashcroft, Ian (2016) Nanoindentation shows uniform local mechanical properties across melt pools and layers produced by selective laser melting of AlSi10Mg alloy. Advanced Materials Letters, 7 (1). pp. 13-16. ISSN 0976-3961

Maskery, Ian, Aboulkhair, N.T., Corfield, M.R., Tuck, Christopher, Clare, A.T., Leach, Richard K., Wildman, Ricky D., Ashcroft, Ian and Hague, Richard J.M. (2016) Quantification and characterisation of porosity in selectively laser melted Al–Si10–Mg using x-ray computed tomography. Materials Characterization, 111 . pp. 193-204. ISSN 1873-4189

Simonelli, Marco, Tuck, Christopher, Aboulkhair, Nesma T., Maskery, Ian, Ashcroft, Ian, Wildman, Ricky D. and Hague, Richard J.M. (2015) A study on the laser spatter and the oxidation reactions during selective laser melting of 316L stainless steel, Al-Si10-Mg, and Ti-6Al-4V. Metallurgical and Materials Transactions A, 46 (9). pp. 3842-3851. ISSN 1543-1940

Maskery, Ian, Aremu, Adedeji, Simonelli, M., Tuck, Christopher, Wildman, Ricky D., Ashcroft, Ian and Hague, Richard J.M. (2015) Mechanical properties of Ti-6Al-4V selectively laser melted parts with body-centred-cubic lattices of varying cell size. Experimental Mechanics, 55 (7). pp. 1261-1272. ISSN 1741-2765

Aboulkhair, Nesma T., Tuck, Christopher, Ashcroft, Ian, Maskery, Ian and Everitt, Nicola M. (2015) On the precipitation hardening of selective laser melted AlSi10Mg. Metallurgical and Materials Transactions A, 46 (8). pp. 3337-3341. ISSN 1073-5623

Conference or Workshop Item

Thompson, Adam, Maskery, Ian and Leach, Richard (2018) Internal surface measurement by X-ray computed tomography: an additive manufacturing industrial case study. In: 3rd Dimensional X-ray Computed Tomography Conference (dXCT), 2-3 July 2018, Nottingham, UK.

Elmadih, Waiel A., Syam, Wahyudin P., Maskery, Ian and Leach, Richard (2017) Additively manufactured lattice structures for precision engineering applications. In: 32nd Annual Meeting of the American Society for Precision Engineering, October 29 – November 3, 2017, Charlotte, North Carolina, USA.

Xu, Zhengkai, Hyde, Christopher J., Thompson, Adam, Leach, Richard K., Maskery, Ian, Tuck, Christopher and Clare, Adam T. (2017) Defect evolution in laser powder bed fusion additive manufactured components during thermo-mechanical testing. In: Joint Special Interest Group meeting between euspen and ASPE Dimensional Accuracy and Surface Finish in Additive Manufacturing, 10-12 Oct2017, Leuven, Belgium.

Syam, Wahyudin P., Jianwei, Wu, Zhao, Bo, Maskery, Ian and Leach, Richard K. (2017) Design of mechanically-optimised lattice structures for vibration isolation. In: euspen's 17th International Conference & Exhibition, 29 May - 2 June 2017, Hannover, Germany.

Thompson, Adam, Körner, Lars, Senin, Nicola, Lawes, Simon, Leach, Richard and Maskery, Ian (2017) X-ray computed tomography of additively manufactured metal parts: the effect of magnification and reconstruction sampling on surface topography measurement. In: 16th Conference on Metrology and properties of Engineering Surfaces, 27-29 June 2017, Göteborg, Sweden.

Thompson, Adam, Körner, Lars, Senin, Nicola, Lawes, Simon, Maskery, Ian and Leach, Richard K. (2017) Measurement of internal surfaces of additively manufactured parts by X-ray computed tomography. In: 7th Conference on Industrial Computed Tomography (iCT 2017), 7-9 Feb 2017, Leuven, Belgium.

Aboulkhair, Nesma T., Tuck, Christopher, Maskery, Ian, Ashcroft, Ian and Everitt, Nicola (2015) Nano-hardness and microstructure of selective laser melted AlSi10Mg scan tracks. In: Industrial Laser Applications Symposium (ILAS 2015), 17-18 March 2015, Kenilworth, UK.