• Login
• Admin

2018

Körner, Lars, Lawes, Simon, Newton, Lewis, Senin, Nicola and Leach, Richard K. (2018) Effects of sinogram interpolation for increasing throughput rate of surface topography measurements using X-ray computed tomography. In: 3rd Dimensional X-ray Computed Tomography Conference, 2-3 Jul 2018, University of Nottingham. (Unpublished)

Todhunter, Luke D., Senin, Nicola, Leach, Richard, Lawes, Simon, Blateyron, François and Harris, Peter (2018) A programmable software framework for the generation of simulated surface topography. In: euspen 18th International Conference & Exhibition, 4-8 June 2018, Venice, Italy.

Thompson, Adam, Senin, Nicola, Maskery, Ian, Körner, Lars, Lawes, Simon and Leach, Richard (2018) Internal surface measurement of metal powder bed fusion parts. Additive Manufacturing, 20 . pp. 126-133. ISSN 2214-8604

2017

Todhunter, Luke D., Leach, Richard, Lawes, Simon and Blateyron, François (2017) Industrial survey of ISO surface texture parameters. CIRP Journal of Manufacturing Science and Technology, 19 . pp. 84-92. ISSN 1755-5817

Gomez, Carlos, Su, Rong, Thompson, Adam, DiSciacca, Jack, Lawes, Simon and Leach, Richard K. (2017) Optimisation of surface measurement for metal additive manufacturing using coherence scanning interferometry. Optical Engineering, 56 (11). 111714/1-111714/8. ISSN 1560-2303

Todhunter, Luke D., Leach, Richard, Lawes, Simon, Harris, Peter and Blateyron, François (2017) Development of mathematically-defined surfaces. In: Postgraduate Institute Conference 2017, 30-31 October 2017, Teddington, UK.

Gómez, Carlos A., Su, Rong, Thompson, Adam, DiSciacca, Jack, Lawes, Simon and Leach, Richard K. (2017) Optimisation of surface topography characterisation for metal additive manufacturing using coherence scanning interferometry. In: Joint Special Interest Group meeting between euspen and ASPE Dimensional Accuracy and Surface Finish in Additive Manufacturing, 10-12 October 2017, Leuven, Belgium.

DiSciacca, Jack, Gomez, Carlos, Thompson, Adam, Lawes, Simon, Leach, Richard, Colonna de Lega, Xavier and de Groot, Peter (2017) True-color 3D surface metrology for additive manufacturing using interference microscopy. In: Joint Special Interest Group meeting between euspen and ASPE Dimensional Accuracy and Surface Finish in Additive Manufacturing, 10-12 October 2017, Leuven, Belgium.

Todhunter, Luke D., Leach, Richard, Lawes, Simon and Blateyron, François (2017) An analysis of Type F2 software measurement standards for profile surface texture parameters [Abstract]. In: Advanced Mathematical and Computational Tools in Metrology and Testing XI, 29-31 August 2017, Glasgow, UK.

Feng, Xiaobing, Pascal, Jonathan and Lawes, Simon (2017) A microscopy approach for in situ inspection of the μCMM stylus for contamination. Measurement Science and Technology, 28 (9). ISSN 1361-6501

Todhunter, Luke D., Leach, Richard and Lawes, Simon (2017) Results of an industrial survey on the use of surface texture parameters. In: Met & Props 2017: the 16th International Conference on Metrology and Properties of Engineering Surfaces, 26-29 June 2017, Gothenburg, Sweden.

Gomez, Carlos, Thompson, Adam, DiSciacca, Jack, Lawes, Simon and Leach, Richard (2017) Coherence scanning interferometry for additive manufacture. In: 16th Conference on Metrology and properties of Engineering Surfaces, 27-29 June 2017, Göteborg, Sweden.

Thompson, Adam, Körner, Lars, Senin, Nicola, Lawes, Simon, Leach, Richard and Maskery, Ian (2017) X-ray computed tomography of additively manufactured metal parts: the effect of magnification and reconstruction sampling on surface topography measurement. In: 16th Conference on Metrology and properties of Engineering Surfaces, 27-29 June 2017, Göteborg, Sweden.

Todhunter, Luke D., Leach, Richard K., Lawes, Simon and Blateyron, François (2017) An analysis of type F2 software measurement standards for profile surface texture parameters. Measurement Science and Technology, 28 (6). 065017/1-065017/21. ISSN 1361-6501

Thompson, Adam, Körner, Lars, Senin, Nicola, Lawes, Simon, Maskery, Ian and Leach, Richard K. (2017) Measurement of internal surfaces of additively manufactured parts by X-ray computed tomography. In: 7th Conference on Industrial Computed Tomography (iCT 2017), 7-9 Feb 2017, Leuven, Belgium.

2016

Feng, Xiaobing, Kinnell, Peter K. and Lawes, Simon (2016) Development of CO2 snow cleaning for in situ cleaning of µCMM stylus tips. Measurement Science and Technology, 28 (1). ISSN 1361-6501

Feng, Xiaobing, Lacorne, Cyril, Fernandes, Gustavo Q., Lawes, Simon and Kinnell, Peter (2016) Contamination of µCMM stylus tips: on-machine inspection. In: 16th International Conference of the European Society for Precision Engineering and Nanotechnology, 30 May - 3 June 2016, Nottingham, UK.

Alblahaihid, Khalid, Kinnell, Peter, Lawes, Simon, Desgaches, Dorian and Leach, Richard K. (2016) Performance assessment of a new variable stiffness probing system for micro-CMMs. Sensors, 16 (4). 492/1-492/18. ISSN 1424-8220

2015

Feng, Xiaobing, Lawes, Simon and Kinnell, Peter K. (2015) The development of a snow cleaning system for micro-CMM stylus tips. In: 15th International Conference of the European Society for Precision Engineering and Nanotechnology, 1 - 5 June 2015, Leuven, Belgium.

Feng, Xiaobing, Lawes, Simon and Kinnell, Peter K. (2015) Evaluation of the capabilities and damage risk of cleaning methods for micro-CMM stylus tips. In: 4M/ICOMM2015 Conference, 31st March – 2nd April 2015, Milan, Italy.