Browse by Authors and Editors
Jump to: Article | Conference or Workshop Item Number of items: 23. ArticleWilliams, Orla and Taylor, Simon and Lester, Edward and Kingman, Sam and Giddings, Donald and Eastwick, Carol (2018) Applicability of mechanical tests for biomass pellet characterisation for bioenergy applications. Materials, 11 (8). ISSN 1996-1944 Bozhko, Serhiy and Yang, Tao and Le Peuvedic, Jean-Marc and Arumugam, Puvaneswaran and Degano, Marco and La Rocca, Antonino and Xu, Zeyuan and Rashed, Mohamed and Fernando, Weerahannadige and Hill, Christopher Ian and Eastwick, Carol and Pickering, Stephen J. and Gerada, C. and Wheeler, Patrick (2018) Development of aircraft electric starter-generator system based-on active rectification technology. IEEE Transactions on Transportation Electrification . ISSN 2372-2088 Shan, Liang and Kong, Ming and Bennet, Tom D. and Sarroza, Archi C. and Eastwick, Carol and Sun, Duo and Lu, Gang and Yan, Yong and Liu, Hao (2018) Studies on combustion behaviours of single biomass particles using a visualization method. Biomass and Bioenergy, 109 . pp. 54-60. ISSN 1873-2909 Williams, Orla and Eastwick, Carol and Kingman, S.W. and Giddings, Donald and Lormor, Stephen and Lester, Edward (2017) Overcoming the caking phenomenon in olive mill wastes. Industrial Crops and Products, 101 . pp. 92-102. ISSN 0926-6690 Williams, Orla and Lester, Edward and Kingman, Sam and Giddings, Donald and Lormor, Stephen and Eastwick, Carol (2017) Benefits of dry comminution of biomass pellets in a knife mill. Biosystems Engineering, 160 . pp. 42-54. ISSN 1537-5110 Graham, Shalini and Eastwick, Carol and Snape, Colin and Quick, Will (2017) Mechanical degradation of biomass wood pellets during long term stockpile storage. Fuel Processing Technology, 160 . pp. 143-151. ISSN 0378-3820 Bai, Xiaojing and Lu, Gang and Bennet, Tom D. and Sarroza, Archi C. and Eastwick, Carol and Liu, Hao and Yan, Yong (2017) Combustion behavior profiling of single pulverized coal particles in a drop tube furnace through high-speed imaging and image analysis. Experimental Thermal and Fluid Science, 85 . pp. 322-330. ISSN 0894-1777 Sarroza, Archi C. and Bennet, Tom D. and Eastwick, Carol and Liu, Hao (2016) Characterising pulverised fuel ignition in a visual drop tube furnace by use of a high-speed imaging technique. Fuel Processing Technology, 157 . pp. 1-11. ISSN 0378-3820 Williams, Orla and Newbolt, Gary and Eastwick, Carol and Kingman, Sam W. and Giddings, Donald and Lormor, Stephen and Lester, Edward (2016) Influence of mill type on densified biomass comminution. Applied Energy, 182 . pp. 219-231. ISSN 0306-2619 Graham, Shalini L. and Ogunfayo, Ibrahim and Hall, Matthew R. and Snape, Colin and Quick, Will and Weatherstone, Susan and Eastwick, Carol (2016) Changes in the mechanical properties of biomass wood pellets during artificial degradation in a laboratory environment. Fuel Processing Technology . ISSN 0378-3820 Madanayake, Buddhike Neminda and Gan, Suyin and Eastwick, Carol and Ng, Hoon Kiat (2016) Leaching as a pretreatment process to complement torrefaction in improving co-firing characteristics of Jatropha curcas seed cake. Waste and Biomass Valorization, 7 (3). pp. 559-569. ISSN 1877-2641 Madanayakea, Buddhike Neminda and Gan, Suyin and Eastwick, Carol and Ng, Hoon Kiat (2016) Thermochemical and structural changes in Jatropha curcas seed cake during torrefaction for its use as coal co-firing feedstock. Energy, 100 . pp. 262-272. ISSN 0360-5442 Williams, Orla and Eastwick, Carol and Kingman, S.W. and Giddings, Donald and Lormor, Stephen and Lester, Edward (2015) Investigation into the applicability of Bond Work Index (BWI) and Hardgrove Grindability Index (HGI) tests for several biomasses compared to Colombian La Loma coal. Fuel, 158 . pp. 379-387. ISSN 1873-7153 Gkanas, Evangelos I. and Grant, David M. and Stuart, Alastair D. and Eastwick, Carol and Book, D. and Nayebossadri, S. and Pickering, L. and Walker, Gavin S. (2015) Numerical study on a two-stage metal hydride hydrogen compression system. Journal of Alloys and Compounds, 645 (Supp1). S18-S22. ISSN 1873-4669 Connor, Peter H. and Pickering, S.J. and Gerada, C. and Eastwick, Carol and Micallef, Christopher and Tighe, Chris (2013) Computational fluid dynamics modelling of an entire synchronous generator for improved thermal management. IET Electric Power Applications, 7 (3). pp. 231-236. ISSN 1751-8679 Taylor, Jennifer and Eastwick, Carol and Lawrence, Claire and Wilson, Robin (2013) Noise levels and noise perception from small and micro wind turbines. Renewable Energy, 55 . pp. 120-127. ISSN 1879-0682 Eastwick, Carol and Simmons, K. and Al-Shibl, K. (2007) Modelling windage power loss from an enclosed spur gear. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 221 (3). pp. 331-341. ISSN 2041-2967 Wang, Y. and Simmons, K. and Eastwick, Carol and Hibberd, S. (2006) Study of aero-engine oil-air separators. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 220 (7). pp. 707-717. ISSN 0957-6509 Conference or Workshop ItemConnor, Peter H. and Eastwick, Carol and Pickering, S.J. and Gerada, C. and Rolston, R. (2016) Stator and rotor vent modelling in a MVA rated synchronous machine. In: International Conference on Electrical Machines (ICEM 2016), 4-7 Sept. 2016, Lausanne, Switzerland. La Rocca, A. and Xu, Z. and Arumugam, P. and Pickering, S.J. and Eastwick, Carol and Gerada, C. and Bozhko, S. (2016) Thermal management of a high speed permanent magnet machine for an aeroengine. In: XXIIth International Conference on Electrical Machines (ICEM '2016), 4-7 September 2016, Lausanne, Switzerland. Williams, Orla and Eastwick, Carol and Lester, Edward and Giddings, Donald and Lormor, Stephen (2015) Impact of mill type on biomass mill behavior. In: 2015 ASABE Annual International Meeting, 26-29 July 2015, New Orleans, USA. Williams, Orla and Eastwick, Carol and Lester, Edward and Giddings, Donald and Byrne, Norman (2014) The impact of moisture on the milling behavior of different biomasses. In: 22nd European Biomass Conference and Exhibition, 23rd-26th June 2014, Hamburg, Germany. Williams, Orla and Eastwick, Carol and Lester, Edward and Giddings, Donald and Byrne, Norman (2013) Optimisation of biomass milling for conveyance and combustion. In: 21st European Biomass Conference and Exhibition, 3-7 June 2013, Copenhagen, Denmark. |