Browse by Faculties and Schools

Up a level
Export as [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Date | No Grouping
Jump to: 2024 | 2023 | 2022 | 2021 | 2020 | 2019 | 2018 | 2017 | 2016 | 2015 | 2014 | 2012 | 2011
Number of items at this level: 51.

2024

Banda, Tiyamike (2024) Condition monitoring of tool performance using a machine learning-based on-machine vision system during face milling of Inconel 718. PhD thesis, University of Nottingham.

Metwalli, Khaled Mohamed (2024) Fabrication and characterizations of additively manufactured PVDF-HFP composites for potential force sensing applications. MPhil thesis, University of Nottingham.

2023

Choo, Edwin Jia Chiet (2023) Development of a new n-dodecane-n-butanol-PAH reduced mechanism and the applications under diesel spray combustion. PhD thesis, University of Nottingham.

Kow, Yu Yang (2023) Development and characterisation of thermal responsive shape memory natural rubber. PhD thesis, University of Nottingham.

Ramli, Roslim (2023) Specialty natural rubber latex and latex foam products made therefrom. PhD thesis, University of Nottingham.

Tarar, Mariam Altaf (2023) Study of lean system higher education institutions practices and lean system outcome. MPhil thesis, University of Nottingham.

Yong, Hsin Nam Ernest (2023) Development of collagen functionalized thermally responsive poly(N-isopropylacrylamide) electrospun nanofibers scaffold potentially as a 3D cell culture platform for rat amniotic fluid stem cells. PhD thesis, University of Nottingham.

Zuo, Jiawei (2023) Numerical investigation of heat transfer of a multi-layered microchannel heat sink with tapered channel. PhD thesis, University of Nottingham.

Zwalnan, Selfa Johnson (2023) An open-loop photovoltaic-solar-thermal evacuated tube energy system for health clinics in Nigeria. PhD thesis, University of Nottingham.

2022

Chin, Kar Mun (2022) Controller design of a robotic orthosis using sinusoidal-input describing function model. PhD thesis, University of Nottingham.

Gan, Robert Chee Choong (2022) Duplex project management maturity model (DPM3) key to organisational performance. PhD thesis, University of Nottingham.

2021

Lim, Han Leong (2021) Gait trajectory prediction via extreme learning machine. MPhil thesis, University of Nottingham.

2020

Kaluarachchi, Malaka Miyuranga (2020) Development of underactuated tendon driven manipulator incorporated with energy saving bistable electromagnetic coupling mechanism. PhD thesis, University of Nottingham.

Kandasamy, Skanda Nathan (2020) Recommendations of marine seismic survey regulatory laws for the oil and gas industry in Malaysia. PhD thesis, University of Nottingham.

Lua, Kheng Leong (2020) Measuring instrument management in ISO quality management system environment. MPhil thesis, University of Nottingham.

Manoharan, Manoorathy (2020) Optimisation studies for wind power generation in Malaysia. PhD thesis, University of Nottingham.

Ng, Wei Jiang (2020) First principle modelling of the fundamental electronics properties of single layer and bilayer graphene nanoflakes materials. PhD thesis, University of Nottingham.

Tan, Jing Yang (2020) Development of a conceptual model for the ultra-fine particulate matter processes in gasoline direct injection engines using integrated CFD-chemical kinetic modelling. PhD thesis, University of Nottingham.

2019

Butt, Ahmed Tamkin (2019) Numerical modelling of the human arterial network in conjunction with the GTF technique to improve cardiovascular diagnostics. PhD thesis, University of Nottingham.

Chang, Tai Kiang (2019) Fusion of low-cost and light-weight sensor system for mobile flexible manipulator. PhD thesis, University of Nottingham.

Goh, Jenn Hsen (2019) Performance mapping of a two-stage travelling wave thermoacoustic engine for heat recovery. PhD thesis, University of Nottingham.

Prabhakar, Arun (2019) Numerical simulations to assess the performance of scoop based lubrication devices for use in aero-engines. PhD thesis, University of Nottingham.

Tan, Ming Gui (2019) Development and application of mathematical models in gait characterisation after stroke. PhD thesis, University of Nottingham Malaysia Campus.

Tan, Thian Khoon (2019) Exploitation of ZnO/Fe3O4 and TiO2/Fe3O4 nanocomposites on the degradation of organic compounds. PhD thesis, University of Nottingham.

2018

Chan, Kok Hong (2018) Nonlinear dynamics of two angles subtended by an angle. MPhil thesis, University of Nottingham.

Chong, Jen Haw (2018) Modelling of subcooled flow boiling in a rectangular micro-channel heat sink. PhD thesis, University of Nottingham.

Kakarla, Akesh Babu (2018) Preparation, characterisation and applications : Boron nitride nanotubes (BNNTs), BNNTs-graphene hybrid and their polymer nanocomposites. MPhil thesis, University of Nottingham.

Kara kuni, Sharsad (2018) Mathematical modelling and experimental investigation of multi-stage valve-less impedance pumping system. PhD thesis, University of Nottingham.

Khalili, Pooria (2018) Palm fiber composites for aircraft interiors. PhD thesis, University of Nottingham.

Obiga, Otuami (2018) Investigation of the performance of a slotted aerofoil at low Reynolds numbers. PhD thesis, University of Nottingham.

Tan, Andrew Huey Ping (2018) The development of a measurement system for water-energy-food (WEF) security Nexus in Malaysia: wellbeing, sectoral balance and sustainable development. PhD thesis, University of Nottingham.

Wong, Voon-Kean (2018) Development of a dynamic model for piezoelectric raindrop energy harvesting. PhD thesis, University of Nottingham.

Yee, Swee Li Maxine (2018) Silver-based nanocomposite materials for marine antifouling applications. PhD thesis, University of Nottingham.

2017

Chan, Park Hinn (2017) Design study of composite repair system for offshore riser applications. PhD thesis, University of Nottingham.

Chandran, Davannendran (2017) Experimental investigation into the physico-chemical properties changes of palm biodiesel under common rail diesel engine operation for the elucidation of metal corrosion and elastomer degradation in fuel delivery system. PhD thesis, University of Nottingham.

Ho, Mui Yen (2017) Transition metal oxide and phosphate-based/carbon composites as supercapacitor electrodes. PhD thesis, University of Nottingham.

Ong, Jiun Cai (2017) Development of Lagrangian soot tracking method for the study of soot morphology in diesel spray combustion. PhD thesis, University of Nottingham.

Ong, Kian Chuan (2017) Numerical algorithm for the computation of compressible turbulent flows at arbitrary Mach number regimes. PhD thesis, University of Nottingham.

Onyemeh, Ngozi C. (2017) Impact of employee psychological empowerment, process and equipment on operational service quality in the oilfield service industry. PhD thesis, University of Nottingham.

2016

Cheng, Xinwei (2016) Development of reduced reaction kinetics and fuel physical properties models for in-cylinder simulation of biodiesel combustion. PhD thesis, University of Nottingham.

Chou, Pui May (2016) The study and fabrication of a novel thermally responsive microcarrier for cell culture application. PhD thesis, University of Nottingham.

Khoo, David Wee Yang (2016) Losses in the regenerator and the critical sections of a travelling wave thermoacoustic engine. PhD thesis, University of Nottingham.

Morris, Kenobi Isima (2016) Computational study of Klang Valley's urban climatology, and urbanisation of Putrajaya city, Malaysia. PhD thesis, University of Nottingham.

Poon, Hiew Mun (2016) Development of integrated chemical kinetic mechanism reduction scheme for diesel and biodiesel fuel surrogates for multi-dimensional CFD applications. PhD thesis, University of Nottingham.

Thoo, Wei Jet (2016) A study of the ignition delay characteristics of combustion in a compression ignition engine operating on blended mixtures of diesel and gasoline. PhD thesis, University of Nottingham.

2015

Jong, Si-Chung (2015) Nonlinear dynamics of a vibro-impact system subjected to electromagnetic interactions. PhD thesis, University of Nottingham.

Wee, David Shuon Tzern (2015) PIV investigation of acoustic transmission through curved duct bends for the optimisation of thermoacoustic systems. PhD thesis, University of Nottingham.

Wong, Whee Yen (2015) Framework of Six Sigma implementation analysis on SMEs in Malaysia for information technology services, products and processes. PhD thesis, University of Nottingham.

2014

Lee, Jiin Woei (2014) Characterisation of hydroxyapatite-coated titanium for biomedical applications. PhD thesis, University of Nottingham.

2012

Chin, Christina May May (2012) Development of a project management methodology for use in a university-industry collaborative research environment. PhD thesis, University of Nottingham.

2011

Salim, Salim Mohamed (2011) Computational study of wind flow and pollutant dispersion near tree canopies. PhD thesis, University of Nottingham.

This list was generated on Thu Mar 28 04:07:29 2024 UTC.