• Login
• Admin

Abdul Kahar, Ainaa (2021) Effect of drying on the kinetics, stability of active ingredients and non- destructive testing of Backhousia citriodora (lemon myrtle) dehydrated leaves. PhD thesis, University of Nottingham Malaysia.

Afreen, Sadia (2018) Ultrasonic dispersal of buckminster fullerene [c60] leads to the formation of [8-hydroxy]fullerenol : synthesis and application. PhD thesis, University of Nottingham.

Alghaffari, Nabeel Kadhim Abbood (2015) Development of a micro crystallisation system for the production of sub-micron particulates with narrow-size-distribution. PhD thesis, University of Nottingham.

Bellam Balaji, Anand (2018) Effect of e-beam sterilization on polypropylene/ethylene propylene diene monomer and ethylene vinyl acetate thermoplastic elastomer. PhD thesis, University of Nottingham.

Chai, Wai Siong (2017) Characterization & analysis on electrolytic decomposition of hydroxylammonium nitrate (HAN) ternary mixtures in microreactors. PhD thesis, University of Nottingham.

Chew, Kit Wayne (2019) Cultivation of microalgae using organic compost as nutrient source for biomolecules extraction via multiphase partitioning techniques. PhD thesis, University of Nottingham.

Chia, Shir Reen (2021) Development of novel sonoprocessing based bi- and triphasic systems for the extraction of biomolecules from microalgae. PhD thesis, University of Nottingham.

Chia, Wen Yi (2024) Understanding the status and prospects of biomass industry: processing biowaste into bioenergy pellets. PhD thesis, University of Nottingham.

Chin, Yen Wei (2023) Operating characteristics and energy efficiency of heat pump dryer for industrial electroplating sludge drying. PhD thesis, University of Nottingham.

Chong, Fah Keen (2017) Systematic approaches for design of ionic liquids and their mixtures for enhanced carbon capture purpose. PhD thesis, University of Nottingham.

Chong, Jia Wen (2023) Computational and experimental studies on the reaction mechanism of bio-oil components with additives for increased stability and fuel quality. PhD thesis, University of Nottingham.

Chong, Yen Yee (2020) Upgrading of bio-oil from palm empty fruit bunch fibre with non-acidic oxides via catalytic intermediate pyrolysis. PhD thesis, University of Nottingham.

Chow, Wei Ling (2019) Anaerobic co-digestion (ACD) of glycerin pitch (GP) with oleochemical effluent (OCE). PhD thesis, University of Nottingham.

Chu, Jin Kiat (2023) Modelling of ultrasonic wave propagation for industrial sonoreactor design and optimisation. PhD thesis, University of Nottingham.

Ee, Cheak Theng (2021) Drying kinetics and quality of dried kedondong fruits undergoing hybrid drying processes. PhD thesis, University of Nottingham.

Ewurum, Chioma Eberechukwu (2019) Techno-economic analysis of micro-algae bio-jet fuel production processes. PhD thesis, University of Nottingham.

Foong, Steve Zhi Yi (2020) Multilevel optimisation for sustainable oil palm value chain development. PhD thesis, University of Nottingham.

Gan, Shu Hui (2017) Improving drying characteristics and quality attributes of edible bird’s nest (EBN) processed under intermittent IR-UVC assisted drying. PhD thesis, University of Nottingham.

Geetha Bai, Renu (2017) Strategies in the fabrication of modified graphene nanomaterials: prospects in the electrochemical sensing of biomolecules and anticancer effects. PhD thesis, University of Nottingham.

Goh, Wui Seng (2018) Synthesis and optimisation of a lignocellulosic biomass pre-processing system for thermochemical biorefineries. MPhil thesis, University of Nottingham.

Hiew, Billie Yan Zhang (2020) Adsorption of pharmaceutical and heavy metal contaminants onto three-dimensional graphene based structures. PhD thesis, University of Nottingham.

Hong, Boon Hooi (2020) Novel approach for integrated biomass supply chain synthesis and optimisation. PhD thesis, University of Nottingham.

How, Bing Shen (2018) Novel sustainable evaluation approach for multi-biomass supply chain. PhD thesis, University of Nottingham.

Ismail, Muhammad Heikal (2019) Investigating the effect of pre-treatment on the drying kinetics and quality traits of rice noodles. PhD thesis, University of Nottingham.

Jalilian Ahmadkalaei, Seyedeh Pegah (2018) Integrated physical-Fenton remediation of petroleum-contaminated soil using ethyl lactate as a green solvent. PhD thesis, University of Nottingham.

Jourabchi, Seyed Amirmostafa (2015) Production and physicochemical characterisation of bio-oil from the pyrolysis of Jatropha curcus waste. PhD thesis, University of Nottingham.

Keng, Zi Xiang (2024) Sustainable biowaste treatment with open-air & in-vessel composting. PhD thesis, University of Nottingham.

Ketabchi, Mohammad-Reza (2018) Preparation, characterisation and optimisation of cellulose nanoparticles from kenaf fibre and its application in polylactic acid reinforcement. PhD thesis, University of Nottingham.

Khoo, Kuan Shiong (2021) Green approaches and separation techniques for the recovery of pigments from microalgae. PhD thesis, University of Nottingham.

Knight, Siobhan Megan (2017) Production of enzymes from underutilised crops using biological pretreatment. MPhil thesis, University of Nottingham.

Koyande, Apurav Krishna (2022) Biorefinery of Chlorella sp. using integrated multiphasic systems for biofuel, feed and wound healing application. PhD thesis, University of Nottingham.

Krishnaiah, Prakash (2017) Development of polylactide and polypropylene composites reinforced with sisal fibres and halloysite nanotubes for automotive and structural engineering applications. PhD thesis, University of Nottingham.

Lai, Kar Chiew (2021) Eco-friendly biopolymer integrated three-dimensional hierachichal graphene materials for adsorptive removal of dyes and heavy metals. PhD thesis, University of Nottingham.

Lee, Chai Siah (2017) Extraction of bio-flocculant from okra using hydrothermal and microwave extraction methods combined with a techno-economic assessment. PhD thesis, University of Nottingham.

Leong, Hui Yi (2019) Development of liquid biphasic system for betacyanins extraction from peel and flesh of hylocereus polyrhizus and its applications. PhD thesis, University of Nottingham.

Leong, Wei Dong (2021) An adaptive analytical approach for lean and green framework. PhD thesis, University of Nottingham.

Leong, Yoong Kit (2018) Extraction and purification of green polymers using aqueous two-phase extraction (ATPE). PhD thesis, University of Nottingham.

Leung, Dexter Hoi Long (2020) Potential of mixed consortium of Enterobacteriaceae and Serratia marcescens in synthetic wastewater treatment and power generation in microbial fuel cell. MPhil thesis, University of Nottingham.

Liew, Yuh Xiu (2019) Optimization of enzymatic pretreatment and biogas production for palm oil mill effluent (POME). PhD thesis, University of Nottingham.

Lim, Chang Nong (2019) Novel design and development of PDMS-glass hybrid microfluidic devices for continuous double encapsulation of liquid-oil droplets. PhD thesis, University of Nottingham.

Lim, Chun Hsion (2016) Biomass supply chain optimization : consideration of underutilised biomass via element targeting approach. PhD thesis, University of Nottingham.

Lim, Hooi Ren (2024) Sustainable cultivation and harvesting strategy for Spirulina biorefinery: integrating internet-of-things monitoring and continuous cultivation. PhD thesis, University of Nottingham.

Lim, Mitchell Shyan Wei (2022) The development of nickel-based heterogeneous catalysts with ultrasonic irradiation for the hydrogenation of plant-based feedstock. PhD thesis, University of Nottingham.

Lok, Matthew Sze Tsun (2018) Development of optimisation techniques for ultrasonic equipment for the generation of stable oil-in-water emulsion. MPhil thesis, University of Nottingham.

Low, Elaine (2024) Performance study on a membrane absorber-evaporator component of a solar-driven membrane-based absorption heat pump (MAHP). PhD thesis, University of Nottingham.

Low, Wei Hau (2021) Hybridisation of mixed transition metal oxide with graphene as advanced electrode material for symmetric supercapacitor application. PhD thesis, University of Nottingham.

Madanayake, Buddhike Neminda (2017) Characterization and pre-treatment of Jatropha curcas seed cake for co-firing with coal. PhD thesis, University of Nottingham.

Mariapun, Shivaani (2024) Mammographic density and breast cancer risk in Asian women. PhD thesis, University of Nottingham.

Markandan, Kalaimani (2017) Processing and characterization of atz and ysz-graphene composites for fabrication of mems scale microthruster. PhD thesis, University of Nottingham.

Mat Aron, Nurul Syahirah (2024) Sustainable extraction and purification of microalgae lipid using liquid biphasic flotation system for production of biofuel. PhD thesis, University of Nottingham.

Michael, Feven Mattews (2017) Preparation and properties of poly-lactic acid, nanohydroxyapatite and graphene nanocomposite blends for load bearing bone implants. PhD thesis, University of Nottingham.

Mohammad, Laheji (2021) Microfluidic nanoparticle synthesis via continuous-wave laser heating. PhD thesis, University of Nottingham.

Mohammed, Isah Yakub (2017) Pyrolysis of Napier grass to bio-oil and catalytic upgrading to high grade bio-fuel. PhD thesis, University of Nottingham.

Mohd Yusoff, Nurul Husna (2024) Systematic approaches to design chitosan functionalised 3D-printed monolith with AI technology for colour removal in wastewater treatment. PhD thesis, University of Nottingham.

Murugappan, Viknesh Andiappan (2016) Systematic approaches for synthesis, design and operation of biomass-based energy systems. PhD thesis, University of Nottingham.

Muthoosamy, Kasturi (2016) Exceedingly biocompatible and thin-layered reduced graphene oxide nanosheets and its application in co-delivery of curcumin and paclitaxel shows highly potent synergistic anticancer effects in A549 and MDA-MB-231 cells. PhD thesis, University of Nottingham.

Ng, Lik Yin (2015) Novel integrated design techniques for biorefineries. PhD thesis, University of Nottingham.

Ng, Mei Xiang (2019) High-temperature intermittent drying: quality characterization of crumb rubber. PhD thesis, University of Nottingham.

Ngan, Sue Lin (2020) Multiple criteria decision analytical tools in assessing risk for green growth: the case of oil palm biomass in Malaysia. PhD thesis, University of Nottingham.

Ooi, Jecksin (2019) The integration of environmental aspects in computer aided molecular design framework. PhD thesis, University of Nottingham.

Pakalapati, Harshini (2019) Development of polycaprolactone based controlled release fertilizer for mung bean crop. PhD thesis, University of Nottingham.

Panda, Debabrata (2018) Cavitation based wastewater treatment of recalcitrant organic pollutants (Dicofol, BDE-209, HBCD, PFOS, PFOA). PhD thesis, University of Nottingham.

Peter, Angela Paul (2022) Sustainable cultivation of microalgae biomass for bioenergy production. PhD thesis, University of Nottingham.

Pitchaimuthu, Diban (2019) Process optimisation for oil and gas platform with process integration techniques. PhD thesis, University of Nottingham.

R. Jagadish, Priyanka (2019) Development and characterisation of recycled carbon fibre based films/composites for thermoelectric applications. PhD thesis, University of Nottingham.

Rahman, Asad (2017) Synthesis and performance analysis of ammonium dinitramide. PhD thesis, University of Nottingham.

Ramarad, Suganti (2016) Improving the properties of reclaimed waste tire rubber by blending with poly(ethylene-co-vinyl acetate) and electron beam irradiation. PhD thesis, University of Nottingham.

Rasheed, Abdul Khaliq (2017) Heat transfer, tribology and performance of graphene nanolubricants in an IC engine. PhD thesis, University of Nottingham.

Raviadaran, Revathi (2021) Process and optimization of palm-oil based water-in-oil-in-water (W/O/W) multiple nanoemulsion encapsulating tocotrienols and caffeic acid with cisplatin as a synergistic anticancer treatment. PhD thesis, University of Nottingham.

Razzaque, Md Abdur (2016) Development and assessment of a fast pyrolysis reactor for bio-oil, syngas and bio-char production from biomass residues. PhD thesis, University of Nottingham.

S Bhasker Nair, Purusothmn Nair (2022) Optimal deployment of negative emissions technologies for sustainable energy planning with process integration techniques. PhD thesis, University of Nottingham Malaysia.

Sankaran, Revathy (2018) Development of an efficient protein recovery system using liquid biphasic flotation. PhD thesis, University of Nottingham.

Santhanam Menon, Abhay (2017) Effects of blanching and drying on the production of polyphenols rich cocoa beans and product quality. PhD thesis, University of Nottingham.

Soh, Chiaw Min (2014) Fluidization bed coating of copper bars with epoxy powder. MPhil thesis, University of Nottingham.

Sumair, Faisal Ahmed (2018) Preparation and characterisation of eutectic nanofluids for heat transfer enhancement in flat plate solar collectors. PhD thesis, University of Nottingham.

Tan, Chung Hong (2020) Exploration of microalgal culture using a semi-closed thin layer cascade photobioreactor for biodiesel synthesis and protein production. PhD thesis, University of Nottingham Malaysia.

Tang, Doris Ying Ying (2023) Evaluation of mixed microalgae species biorefinery of Desmodesmus sp. And Scenedesmus sp. For bioproducts synthesis. PhD thesis, University of Nottingham.

Tang, Jiang Ping (2018) Palm biomass supply management : a predictive analysis tool. PhD thesis, University of Nottingham.

Ten, Joon Yoon (2018) The integration of safety and health aspects in chemical product design framework. PhD thesis, University of Nottingham.

Tham, Thing Chai (2018) Improving drying efficiency and energy saving for crumb natural rubber drying with combined drying technologies. PhD thesis, University of Nottingham.

Wan, Yoke Kin (2016) Syhthesise [sic] a sustainable sago industry. PhD thesis, University of Nottingham.

Wong, Kin Nyap (2017) Synthesis of nano lead oxide for the application of lead-acid energy storage devices. MPhil thesis, University of Nottingham.

Wong, Voon Loong (2015) Computational studies of shear-dependent non-newtonian droplet formation at microfluidics T-junction with experimental justification. PhD thesis, University of Nottingham.

Wong, Xin Yi (2021) Design, development and application of protein-templated gold nanoclusters in biosensing of glutathione, sodium and potassium ions. PhD thesis, University of Nottingham Malaysia.

Xavier, Deeviya Francis (2017) Treatment of anaerobically digested palm oil mill effluent (POME) using JERING (Archidendron jiringa) seeds as a novel plant-based coagulant. MPhil thesis, University of Nottingham.

Xin Jiat, Lee (2018) Evaluation of cost effective adsorbent and biochar from Malaysia oil palm wastes: synthesis, characterisation and optimisation studies. PhD thesis, University of Nottingham.

Yap, Cheau Chin (2021) Biogas production from Palm Oil Mill Effluent (POME) using mono- and co-digestion with pilot-scale Integrated Anaerobic-Aerobic Bioreactor (IAAB). PhD thesis, University of Nottingham Malaysia.

Yap, Jing Ying (2022) Effects of drying conditions on drying kinetics, product quality and retention of carpaine in papaya leaves (Carica papaya Linn.). PhD thesis, University of Nottingham.

Yew, Guo Yong (2021) Lipid extraction from thermal Fenton reaction in hybrid liquid biphasic system for biofuel and rubber bio-additive compounds. PhD thesis, University of Nottingham.