Ground vibration measurements near impact pile driving

Grizi, Athina, Athanasopoulos-Zekkos, Adda and Woods, Richard (2016) Ground vibration measurements near impact pile driving. Journal of Geotechnical and Geoenvironmental Engineering, 142 (8). 04016035/1-04016035/11. ISSN 1943-5606

Full text not available from this repository.

Abstract

Pile driving is a complex dynamic process where little insight has been garnered in terms of the energy transfer from the driver to the soil and surrounding structures. Ground motion measurements during driving of full scale steel H-piles with diesel hammers are presented. The key feature of this work is the in-depth sensor installation starting very close to the pile (0.2 m), at other radial distances from the pile, and at various depths in the ground. Differences in wave sources from the tip and the shaft of the pile as well as wave attenuation coefficients are revealed from the sensor measurements. Attenuation relationships fitted through the data could be used to predict ground motion that could cause shakedown settlement. A conventional line array of surface mounted geophones was also used and results are presented.

Item Type: Article
RIS ID: https://nottingham-repository.worktribe.com/output/785012
Additional Information: © ASCE
Keywords: Impact pile driving; H-piles; Ground motion vibrations; Energy propagation; Attenuation rate
Schools/Departments: University of Nottingham, UK > Faculty of Engineering > Department of Civil Engineering
Identification Number: https://doi.org/10.1061/(ASCE)GT.1943-5606.0001499
Depositing User: Gkrizi, Athina
Date Deposited: 04 Apr 2018 09:34
Last Modified: 04 May 2020 17:46
URI: https://eprints.nottingham.ac.uk/id/eprint/50849

Actions (Archive Staff Only)

Edit View Edit View