Treatment of produced water by simultaneous removal of heavy metals and dissolved polycyclic aromatic hydrocarbons in a photoelectrochemical cell

Igunnu, Ebenezer Temitope (2014) Treatment of produced water by simultaneous removal of heavy metals and dissolved polycyclic aromatic hydrocarbons in a photoelectrochemical cell. PhD thesis, University of Nottingham.

[img]
Preview
PDF - Requires a PDF viewer such as GSview, Xpdf or Adobe Acrobat Reader
Download (9MB) | Preview

Abstract

Early produced water treatment technologies were developed before carbon dioxide emissions and hazardous waste discharge were recognised as operational priority. These technologies are deficient in the removal of dissolved hydrocarbons and dissolved heavy metal ions which have been identified as major contributors to the high environmental impact factor of produced water. The simultaneous removal of heavy metals and polycyclic aromatic hydrocarbon (PAH) from produced water via photoelectrochemical process was identified in this work as a produced water treatment alternative with the potential to virtually eliminate the cost for chemical reagents and high energy input.

Several grades of simulated produced water were synthesised and used to understand different parameters necessary for developing a successful photoelectrochemical treatment. The process demonstrated in this work followed a simple two–electrode photoelectrochemical cell where heavy metals were recovered on a platinum electrode with simultaneous degradation of PAH (phenanthrene) on a photoanode, with the aid of sunlight (simulated) and an applied cell voltage of 1.0 V. Multiwall CNT-TiO2 synthesised via a modified sol-gel method served as the photoanode after it was immobilised at a loading of 2.5 mg/cm2 on a titanium plate. The results obtained from the photoelectrochemical treatment showed a recovery of 1.6 g/cm2 of lead, 0.2 g/cm2 of copper and 0.1 g/cm2 of nickel from produced water on a 0.1 cm diameter platinum electrode after 24 hours of irradiation with simulated sunlight at 1.0 V cell voltage and a simultaneous degradation of up to 16 % phenanthrene on the photoanode, which gives a potential of scaling up the process to a commercial throughput.

Item Type: Thesis (University of Nottingham only) (PhD)
Supervisors: Chen, G.Z.
Keywords: Oil field brines, heavy metals, polycyclic aromatic hydrocarbons, photoelectrochemistry
Subjects: T Technology > TN Mining engineering. Metallurgy
Faculties/Schools: UK Campuses > Faculty of Engineering > Department of Chemical and Environmental Engineering
Item ID: 14324
Depositing User: EP, Services
Date Deposited: 24 Oct 2014 13:48
Last Modified: 15 Dec 2017 05:53
URI: https://eprints.nottingham.ac.uk/id/eprint/14324

Actions (Archive Staff Only)

Edit View Edit View