Fluid dynamics of controllable synthesis of micro-fine powder particles using Taylor-Couette flow reactors

Xue, Chenyang (2021) Fluid dynamics of controllable synthesis of micro-fine powder particles using Taylor-Couette flow reactors. PhD thesis, University of Nottingham.

[img] PDF (Thesis - as examined) - Repository staff only - Requires a PDF viewer such as GSview, Xpdf or Adobe Acrobat Reader
Download (15MB)

Abstract

Synthesis of fine particles is widely encountered in many applications. Typical examples can be found in fabrication of pigments, ceramics, pharmaceuticals and bio-chemicals among others. During the whole process of particle synthesis, one particle will engage several periods such as nucleation, particle growth, aggregation and breakage. The reaction environment provided by chemical reactors plays a crucial role in particle synthesis. The control of particle properties such as size and morphology are mostly determined by the control of fluid dynamics in the reactors. Therefore, the purpose of this PhD research is to investigate the fluid dynamics in Taylor-Couette (TC) flow reactors for the application of controllable synthesis of micro-fine powder particles. The main work and outcomes can be summarised as:

(1) In chapter 2, CFD modelling, flow visualization and conductivity experiment are performed to investigate the mixing behaviour with the adoption of non-circular cylinder. It shows that the use of non-circular inner cylinder can significantly improve macro-mixing throughout the reactor. Mass transfer is therefore enhanced and provides a better environment for micro-mixing between the embedded turbulent eddies in the Taylor vortices. As a result, the micro-mixing has been improved over the whole reactor. Such improvement on micro and macro-mixing behaviour implies that the production of micro particles can be effectively controlled when using a Taylor-Couette flow reactor for synthesis.

(2) Following the work of Chapter 2, Chapter 3 is focused on the local fluid dynamics in a large Taylor Couette reactor. Particle Image Velocimetry (PIV) method is used to reveal the shear turbulence and hydrodynamics in the reactor. It is shown that centrifugal force has a larger influence in the flow patterns. In such cases, the instabilities are easily initiated so that the flow patterns experience huge changes. Gravity force due to vertical alignment of the reactor influences the flow both in its normal (radical) and parallel (axial) direction. The Taylor vortex structures tends to deform along the height as the spatial correlation coefficients along the axial direction still exhibit a regularly periodic pattern but gradually reduces. This change reflects the deformation of Taylor vortices.

(3) In Chapter 4, by using PIV, the applications of rough surface and non-circular inner cylinder have very different influence on the vortex structures and shear turbulence generated in the Taylor Couette flow reactor. The adoption of the non-circular inner cylinder apparently changes the vortices in large scales. Turbulence is strongly enhanced using the non-circular inner cylinder but less enhancement was found for the use of the rough surface inner cylinder. The main effects of rough surface on the shear turbulence are that the spatial distribution of turbulence characters in the vicinity of the inner cylinder have changed their distribution. High turbulent kinetic energy (TKE) and high TKE dissipation rate region are not always to appear in the same locations due to strong convection.

(4) Based on the basic understanding of fluid dynamics and mixing behaviour from Chapter 3 and Chapter 4, an example of the effect of fluid dynamics on synthesis of micro particles, barium sulphate particles are tracked using the Euler-Lagrange approach with consideration of the particle growth in the synthesis process with particle size changes with time. The particle trajectories change dramatically for particles when particle size changes with time. The particle trajectories tracked in the circular and non-circular inner cylinder Taylor-Couette flow reactors present helical movement but are entrapped and affected by the presence of Taylor vortices. The calculated dispersion coefficient for both types of inner cylinder Taylor-Couette flow reactors indicates that particle dispersion, especially in the axial direction, is not always improved by adoption of the non-circular inner cylinder.

To sum up, this PhD work mainly provides a fundamental study focused on the characterization of fluid dynamics which affects particle synthesis process. Flow visualization, mixing experiment, PIV and CFD are used to study the key fluid dynamic characteristics in both circular and non-circular Taylor-Couette reactor. The main implication is that characters which affects particle synthesis process such as mixing, shear strain and particle dispersion can be better controlled by adopting non-circular inner cylinder Taylor Couette reactor. Meanwhile, various length scale turbulent eddies embedded in the Taylor vortices have is strongly affected by inner cylinder boundary conditions, thus influence the control and performance of the reactor. Focus should be placed on the key characters of flow which affects actual particle synthesis process when using the Taylor-Couette reactors.

Item Type: Thesis (University of Nottingham only) (PhD)
Supervisors: Yang, Xiaogang
Li, Guang
Keywords: Fine Particles; CFD; PIV
Subjects: T Technology > TJ Mechanical engineering and machinery
Faculties/Schools: UNNC Ningbo, China Campus > Faculty of Science and Engineering > Department of Mechanical, Materials and Manufacturing Engineering
Item ID: 64393
Depositing User: Xue, Chenyang
Date Deposited: 19 Feb 2021 05:45
Last Modified: 24 Feb 2021 08:34
URI: https://eprints.nottingham.ac.uk/id/eprint/64393

Actions (Archive Staff Only)

Edit View Edit View