Residual stresses in environmental and thermal barrier coatings on curved superalloy substrates: experimental measurements and modelling

Liu, D. and Kyaw, S.T. and Flewitt, P.E.J. and Seraffon, M. and Simms, N.J. and Pavier, M. and Jones, I.A. (2014) Residual stresses in environmental and thermal barrier coatings on curved superalloy substrates: experimental measurements and modelling. Materials Science and Engineering: A, 606 . pp. 117-126. ISSN 0921-5093

[img]
Preview
PDF - Requires a PDF viewer such as GSview, Xpdf or Adobe Acrobat Reader
Available under Licence Creative Commons Attribution Non-commercial No Derivatives.
Download (1MB) | Preview

Abstract

Residual stresses within thermal barrier coated (TBC) systems are predicted using finite element models and are compared against experimental measurements taken using Raman and photo-stimulated luminescence piezo-spectroscopic methods. Two types of specimens were considered: flat specimens without TBC, and aerofoil shaped specimens with TBC. Comparisons between model predictions and experimentally measured stresses and also the relationship between substrate curvature and residual stresses on subsequent spallation of the aerofoil specimen were made. For the flat specimen, predicted and measured residual stresses are of the same order of magnitude. Both studies have indicated that larger compressive residual stresses arise from higher substrate curvatures. The results improve the understanding of initiation and propagation of TBC cracks which occurs preferentially at locations with high substrate convex curvature.

Item Type: Article
Schools/Departments: University of Nottingham UK Campus > Faculty of Engineering > Department of Mechanical, Materials and Manufacturing Engineering
Identification Number: https://doi.org/10.1016/j.msea.2014.03.014
Depositing User: Eprints, Support
Date Deposited: 15 Aug 2016 08:05
Last Modified: 14 Sep 2016 15:03
URI: http://eprints.nottingham.ac.uk/id/eprint/35845

Actions (Archive Staff Only)

Edit View Edit View