A synchronised multi-motor control system using hybrid sensorless induction motor drives

Turl, Gary (2002) A synchronised multi-motor control system using hybrid sensorless induction motor drives. PhD thesis, University of Nottingham.

[img]
Preview
PDF - Requires a PDF viewer such as GSview, Xpdf or Adobe Acrobat Reader
Download (36MB) | Preview

Abstract

The main aim of this project was to research, develop and test an induction motor drive not requiring a speed encoder, but which could be considered commercially viable by motor drives manufacturers, and which should aim to meet the follow requirements:

• Dynamic torque performance and steady state speed-holding accuracy to be comparable with encodered vector controlled drives

• Extensive and highly accurate knowledge of electrical and mechanical parameters of the motor and load not to be required

• Extensive commissioning from an expert engineer not to be necessary

• Algorithm not to rely on excessive computational capability being available

The drive was to operate, in a stable manner, over speed and load ranges at least comparable with commercially available sensorless induction motor drives. The above requirements were set such that the developed sensorless technique may be considered for synchronised multi-motor process applications, where the advantages of a sensorless system could be exploited for hazardous, damp and hot conditions.

The solution developed consists of a leading model-based sensorless method augmented with a speed estimator that tracks harmonics, seen in the stator terminal quantities, due to rotor slotting. The model-based scheme facilitates field-orientated control for dynamic performance. The slot harmonic speed estimator tunes the model for speed accuracy. Slot harmonics are identified using a recursive signal processing method termed the Recursive Maximum Likelihood - Adaptive Tracking Filter. This work is the first example of the method being developed into a practical sensorless drive system and the complete speed identifier is described, including set-up, pre-filtering and the minimal parameter considerations. Being recursive the method is computationally efficient, yet has accuracy comparable with that of FFT identifiers used in other work.

The developed sensorless strategy was implemented practically on two motor drive systems. The performance of the scheme is shown to give encoder like speed holding accuracy and field-orientated dynamic performance. The two drives were also configured and tested as a speed synchronised pair, using applicable multi-motor control techniques, themselves compared and contrasted. The sensorless performance is demonstrated, alongside an encodered version acting as a benchmark, and the performance of the two schemes is shown to be highly comparable. The author has found no other example of sensorless techniques considered for use in multi-motor applications. The use of such a technique brings established advantages associated with encoder removal and allows multi-axis electronic synchronisation to be considered for parts of a process where an encoder may not be appropriate.

Item Type: Thesis (University of Nottingham only) (PhD)
Supervisors: Asher, G.M.
Sumner, M.
Keywords: Induction motor drive, Sensorless drive system, Multi-motor process applications
Subjects: T Technology > TK Electrical engineering. Electronics Nuclear engineering
Faculties/Schools: UK Campuses > Faculty of Engineering > Department of Electrical and Electronic Engineering
Item ID: 29510
Depositing User: Blore, Mrs Kathryn
Date Deposited: 05 Aug 2015 08:38
Last Modified: 16 Sep 2016 20:44
URI: http://eprints.nottingham.ac.uk/id/eprint/29510

Actions (Archive Staff Only)

Edit View Edit View